Merge master.kernel.org:/home/rmk/linux-2.6-arm

This commit is contained in:
Linus Torvalds 2005-11-01 21:32:14 -08:00
commit 7f36b1e958
53 changed files with 3579 additions and 497 deletions

View file

@ -81,7 +81,8 @@ Adding New Machines
Any large scale modifications, or new drivers should be discussed
on the ARM kernel mailing list (linux-arm-kernel) before being
attempted.
attempted. See http://www.arm.linux.org.uk/mailinglists/ for the
mailing list information.
NAND
@ -120,6 +121,43 @@ Clock Management
various clock units
Platform Data
-------------
Whenever a device has platform specific data that is specified
on a per-machine basis, care should be taken to ensure the
following:
1) that default data is not left in the device to confuse the
driver if a machine does not set it at startup
2) the data should (if possible) be marked as __initdata,
to ensure that the data is thrown away if the machine is
not the one currently in use.
The best way of doing this is to make a function that
kmalloc()s an area of memory, and copies the __initdata
and then sets the relevant device's platform data. Making
the function `__init` takes care of ensuring it is discarded
with the rest of the initialisation code
static __init void s3c24xx_xxx_set_platdata(struct xxx_data *pd)
{
struct s3c2410_xxx_mach_info *npd;
npd = kmalloc(sizeof(struct s3c2410_xxx_mach_info), GFP_KERNEL);
if (npd) {
memcpy(npd, pd, sizeof(struct s3c2410_xxx_mach_info));
s3c_device_xxx.dev.platform_data = npd;
} else {
printk(KERN_ERR "no memory for xxx platform data\n");
}
}
Note, since the code is marked as __init, it should not be
exported outside arch/arm/mach-s3c2410/, or exported to
modules via EXPORT_SYMBOL() and related functions.
Port Contributors
-----------------
@ -149,6 +187,7 @@ Document Changes
06 Mar 2005 - BJD - Added Christer Weinigel
08 Mar 2005 - BJD - Added LCVR to list of people, updated introduction
08 Mar 2005 - BJD - Added section on adding machines
09 Sep 2005 - BJD - Added section on platform data
Document Author
---------------

View file

@ -194,6 +194,13 @@ config ARCH_VERSATILE
help
This enables support for ARM Ltd Versatile board.
config ARCH_REALVIEW
bool "RealView"
select ARM_AMBA
select ICST307
help
This enables support for ARM Ltd RealView boards.
config ARCH_IMX
bool "IMX"
@ -244,6 +251,8 @@ source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/mach-aaec2000/Kconfig"
source "arch/arm/mach-realview/Kconfig"
# Definitions to make life easier
config ARCH_ACORN
bool

View file

@ -99,6 +99,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000
machine-$(CONFIG_ARCH_IMX) := imx
machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_REALVIEW) := realview
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.

View file

@ -104,7 +104,7 @@ CONFIG_ARCH_IXCDP1100=y
CONFIG_ARCH_PRPMC1100=y
CONFIG_ARCH_IXDP4XX=y
CONFIG_CPU_IXP46X=y
CONFIG_MACH_GTWX5715=y
# CONFIG_MACH_GTWX5715 is not set
#
# IXP4xx Options

View file

@ -7,13 +7,27 @@
lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \
csumpartialcopy.o csumpartialcopyuser.o clearbit.o \
copy_page.o delay.o findbit.o memchr.o memcpy.o \
memset.o memzero.o setbit.o strncpy_from_user.o \
strnlen_user.o strchr.o strrchr.o testchangebit.o \
testclearbit.o testsetbit.o uaccess.o getuser.o \
putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
memmove.o memset.o memzero.o setbit.o \
strncpy_from_user.o strnlen_user.o \
strchr.o strrchr.o \
testchangebit.o testclearbit.o testsetbit.o \
getuser.o putuser.o clear_user.o \
ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
ucmpdi2.o lib1funcs.o div64.o sha1.o \
io-readsb.o io-writesb.o io-readsl.o io-writesl.o
# the code in uaccess.S is not preemption safe and
# probably faster on ARMv3 only
ifeq ($CONFIG_PREEMPT,y)
lib-y += copy_from_user.o copy_to_user.o
else
ifneq ($(CONFIG_CPU_32v3),y)
lib-y += copy_from_user.o copy_to_user.o
else
lib-y += uaccess.o
endif
endif
ifeq ($(CONFIG_CPU_32v3),y)
lib-y += io-readsw-armv3.o io-writesw-armv3.o
else

52
arch/arm/lib/clear_user.S Normal file
View file

@ -0,0 +1,52 @@
/*
* linux/arch/arm/lib/clear_user.S
*
* Copyright (C) 1995, 1996,1997,1998 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
.text
/* Prototype: int __arch_clear_user(void *addr, size_t sz)
* Purpose : clear some user memory
* Params : addr - user memory address to clear
* : sz - number of bytes to clear
* Returns : number of bytes NOT cleared
*/
ENTRY(__arch_clear_user)
stmfd sp!, {r1, lr}
mov r2, #0
cmp r1, #4
blt 2f
ands ip, r0, #3
beq 1f
cmp ip, #2
USER( strbt r2, [r0], #1)
USER( strlebt r2, [r0], #1)
USER( strltbt r2, [r0], #1)
rsb ip, ip, #4
sub r1, r1, ip @ 7 6 5 4 3 2 1
1: subs r1, r1, #8 @ -1 -2 -3 -4 -5 -6 -7
USER( strplt r2, [r0], #4)
USER( strplt r2, [r0], #4)
bpl 1b
adds r1, r1, #4 @ 3 2 1 0 -1 -2 -3
USER( strplt r2, [r0], #4)
2: tst r1, #2 @ 1x 1x 0x 0x 1x 1x 0x
USER( strnebt r2, [r0], #1)
USER( strnebt r2, [r0], #1)
tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1
USER( strnebt r2, [r0], #1)
mov r0, #0
LOADREGS(fd,sp!, {r1, pc})
.section .fixup,"ax"
.align 0
9001: LOADREGS(fd,sp!, {r0, pc})
.previous

View file

@ -0,0 +1,101 @@
/*
* linux/arch/arm/lib/copy_from_user.S
*
* Author: Nicolas Pitre
* Created: Sep 29, 2005
* Copyright: MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
/*
* Prototype:
*
* size_t __arch_copy_from_user(void *to, const void *from, size_t n)
*
* Purpose:
*
* copy a block to kernel memory from user memory
*
* Params:
*
* to = kernel memory
* from = user memory
* n = number of bytes to copy
*
* Return value:
*
* Number of bytes NOT copied.
*/
.macro ldr1w ptr reg abort
100: ldrt \reg, [\ptr], #4
.section __ex_table, "a"
.long 100b, \abort
.previous
.endm
.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
ldr1w \ptr, \reg1, \abort
ldr1w \ptr, \reg2, \abort
ldr1w \ptr, \reg3, \abort
ldr1w \ptr, \reg4, \abort
.endm
.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
ldr4w \ptr, \reg1, \reg2, \reg3, \reg4, \abort
ldr4w \ptr, \reg5, \reg6, \reg7, \reg8, \abort
.endm
.macro ldr1b ptr reg cond=al abort
100: ldr\cond\()bt \reg, [\ptr], #1
.section __ex_table, "a"
.long 100b, \abort
.previous
.endm
.macro str1w ptr reg abort
str \reg, [\ptr], #4
.endm
.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
.endm
.macro str1b ptr reg cond=al abort
str\cond\()b \reg, [\ptr], #1
.endm
.macro enter reg1 reg2
mov r3, #0
stmdb sp!, {r0, r2, r3, \reg1, \reg2}
.endm
.macro exit reg1 reg2
add sp, sp, #8
ldmfd sp!, {r0, \reg1, \reg2}
.endm
.text
ENTRY(__arch_copy_from_user)
#include "copy_template.S"
.section .fixup,"ax"
.align 0
copy_abort_preamble
ldmfd sp!, {r1, r2}
sub r3, r0, r1
rsb r1, r3, r2
str r1, [sp]
bl __memzero
ldr r0, [sp], #4
copy_abort_end
.previous

View file

@ -0,0 +1,255 @@
/*
* linux/arch/arm/lib/copy_template.s
*
* Code template for optimized memory copy functions
*
* Author: Nicolas Pitre
* Created: Sep 28, 2005
* Copyright: MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* This can be used to enable code to cacheline align the source pointer.
* Experiments on tested architectures (StrongARM and XScale) didn't show
* this a worthwhile thing to do. That might be different in the future.
*/
//#define CALGN(code...) code
#define CALGN(code...)
/*
* Theory of operation
* -------------------
*
* This file provides the core code for a forward memory copy used in
* the implementation of memcopy(), copy_to_user() and copy_from_user().
*
* The including file must define the following accessor macros
* according to the need of the given function:
*
* ldr1w ptr reg abort
*
* This loads one word from 'ptr', stores it in 'reg' and increments
* 'ptr' to the next word. The 'abort' argument is used for fixup tables.
*
* ldr4w ptr reg1 reg2 reg3 reg4 abort
* ldr8w ptr, reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
*
* This loads four or eight words starting from 'ptr', stores them
* in provided registers and increments 'ptr' past those words.
* The'abort' argument is used for fixup tables.
*
* ldr1b ptr reg cond abort
*
* Similar to ldr1w, but it loads a byte and increments 'ptr' one byte.
* It also must apply the condition code if provided, otherwise the
* "al" condition is assumed by default.
*
* str1w ptr reg abort
* str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
* str1b ptr reg cond abort
*
* Same as their ldr* counterparts, but data is stored to 'ptr' location
* rather than being loaded.
*
* enter reg1 reg2
*
* Preserve the provided registers on the stack plus any additional
* data as needed by the implementation including this code. Called
* upon code entry.
*
* exit reg1 reg2
*
* Restore registers with the values previously saved with the
* 'preserv' macro. Called upon code termination.
*/
enter r4, lr
subs r2, r2, #4
blt 8f
ands ip, r0, #3
PLD( pld [r1, #0] )
bne 9f
ands ip, r1, #3
bne 10f
1: subs r2, r2, #(28)
stmfd sp!, {r5 - r8}
blt 5f
CALGN( ands ip, r1, #31 )
CALGN( rsb r3, ip, #32 )
CALGN( sbcnes r4, r3, r2 ) @ C is always set here
CALGN( bcs 2f )
CALGN( adr r4, 6f )
CALGN( subs r2, r2, r3 ) @ C gets set
CALGN( add pc, r4, ip )
PLD( pld [r1, #0] )
2: PLD( subs r2, r2, #96 )
PLD( pld [r1, #28] )
PLD( blt 4f )
PLD( pld [r1, #60] )
PLD( pld [r1, #92] )
3: PLD( pld [r1, #124] )
4: ldr8w r1, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
subs r2, r2, #32
str8w r0, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
bge 3b
PLD( cmn r2, #96 )
PLD( bge 4b )
5: ands ip, r2, #28
rsb ip, ip, #32
addne pc, pc, ip @ C is always clear here
b 7f
6: nop
ldr1w r1, r3, abort=20f
ldr1w r1, r4, abort=20f
ldr1w r1, r5, abort=20f
ldr1w r1, r6, abort=20f
ldr1w r1, r7, abort=20f
ldr1w r1, r8, abort=20f
ldr1w r1, lr, abort=20f
add pc, pc, ip
nop
nop
str1w r0, r3, abort=20f
str1w r0, r4, abort=20f
str1w r0, r5, abort=20f
str1w r0, r6, abort=20f
str1w r0, r7, abort=20f
str1w r0, r8, abort=20f
str1w r0, lr, abort=20f
CALGN( bcs 2b )
7: ldmfd sp!, {r5 - r8}
8: movs r2, r2, lsl #31
ldr1b r1, r3, ne, abort=21f
ldr1b r1, r4, cs, abort=21f
ldr1b r1, ip, cs, abort=21f
str1b r0, r3, ne, abort=21f
str1b r0, r4, cs, abort=21f
str1b r0, ip, cs, abort=21f
exit r4, pc
9: rsb ip, ip, #4
cmp ip, #2
ldr1b r1, r3, gt, abort=21f
ldr1b r1, r4, ge, abort=21f
ldr1b r1, lr, abort=21f
str1b r0, r3, gt, abort=21f
str1b r0, r4, ge, abort=21f
subs r2, r2, ip
str1b r0, lr, abort=21f
blt 8b
ands ip, r1, #3
beq 1b
10: bic r1, r1, #3
cmp ip, #2
ldr1w r1, lr, abort=21f
beq 17f
bgt 18f
.macro forward_copy_shift pull push
subs r2, r2, #28
blt 14f
CALGN( ands ip, r1, #31 )
CALGN( rsb ip, ip, #32 )
CALGN( sbcnes r4, ip, r2 ) @ C is always set here
CALGN( subcc r2, r2, ip )
CALGN( bcc 15f )
11: stmfd sp!, {r5 - r9}
PLD( pld [r1, #0] )
PLD( subs r2, r2, #96 )
PLD( pld [r1, #28] )
PLD( blt 13f )
PLD( pld [r1, #60] )
PLD( pld [r1, #92] )
12: PLD( pld [r1, #124] )
13: ldr4w r1, r4, r5, r6, r7, abort=19f
mov r3, lr, pull #\pull
subs r2, r2, #32
ldr4w r1, r8, r9, ip, lr, abort=19f
orr r3, r3, r4, push #\push
mov r4, r4, pull #\pull
orr r4, r4, r5, push #\push
mov r5, r5, pull #\pull
orr r5, r5, r6, push #\push
mov r6, r6, pull #\pull
orr r6, r6, r7, push #\push
mov r7, r7, pull #\pull
orr r7, r7, r8, push #\push
mov r8, r8, pull #\pull
orr r8, r8, r9, push #\push
mov r9, r9, pull #\pull
orr r9, r9, ip, push #\push
mov ip, ip, pull #\pull
orr ip, ip, lr, push #\push
str8w r0, r3, r4, r5, r6, r7, r8, r9, ip, , abort=19f
bge 12b
PLD( cmn r2, #96 )
PLD( bge 13b )
ldmfd sp!, {r5 - r9}
14: ands ip, r2, #28
beq 16f
15: mov r3, lr, pull #\pull
ldr1w r1, lr, abort=21f
subs ip, ip, #4
orr r3, r3, lr, push #\push
str1w r0, r3, abort=21f
bgt 15b
CALGN( cmp r2, #0 )
CALGN( bge 11b )
16: sub r1, r1, #(\push / 8)
b 8b
.endm
forward_copy_shift pull=8 push=24
17: forward_copy_shift pull=16 push=16
18: forward_copy_shift pull=24 push=8
/*
* Abort preanble and completion macros.
* If a fixup handler is required then those macros must surround it.
* It is assumed that the fixup code will handle the private part of
* the exit macro.
*/
.macro copy_abort_preamble
19: ldmfd sp!, {r5 - r9}
b 21f
20: ldmfd sp!, {r5 - r8}
21:
.endm
.macro copy_abort_end
ldmfd sp!, {r4, pc}
.endm

101
arch/arm/lib/copy_to_user.S Normal file
View file

@ -0,0 +1,101 @@
/*
* linux/arch/arm/lib/copy_to_user.S
*
* Author: Nicolas Pitre
* Created: Sep 29, 2005
* Copyright: MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
/*
* Prototype:
*
* size_t __arch_copy_to_user(void *to, const void *from, size_t n)
*
* Purpose:
*
* copy a block to user memory from kernel memory
*
* Params:
*
* to = user memory
* from = kernel memory
* n = number of bytes to copy
*
* Return value:
*
* Number of bytes NOT copied.
*/
.macro ldr1w ptr reg abort
ldr \reg, [\ptr], #4
.endm
.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4}
.endm
.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
.endm
.macro ldr1b ptr reg cond=al abort
ldr\cond\()b \reg, [\ptr], #1
.endm
.macro str1w ptr reg abort
100: strt \reg, [\ptr], #4
.section __ex_table, "a"
.long 100b, \abort
.previous
.endm
.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
str1w \ptr, \reg1, \abort
str1w \ptr, \reg2, \abort
str1w \ptr, \reg3, \abort
str1w \ptr, \reg4, \abort
str1w \ptr, \reg5, \abort
str1w \ptr, \reg6, \abort
str1w \ptr, \reg7, \abort
str1w \ptr, \reg8, \abort
.endm
.macro str1b ptr reg cond=al abort
100: str\cond\()bt \reg, [\ptr], #1
.section __ex_table, "a"
.long 100b, \abort
.previous
.endm
.macro enter reg1 reg2
mov r3, #0
stmdb sp!, {r0, r2, r3, \reg1, \reg2}
.endm
.macro exit reg1 reg2
add sp, sp, #8
ldmfd sp!, {r0, \reg1, \reg2}
.endm
.text
ENTRY(__arch_copy_to_user)
#include "copy_template.S"
.section .fixup,"ax"
.align 0
copy_abort_preamble
ldmfd sp!, {r1, r2, r3}
sub r0, r0, r1
rsb r0, r0, r2
copy_abort_end
.previous

View file

@ -1,393 +1,59 @@
/*
* linux/arch/arm/lib/memcpy.S
*
* Copyright (C) 1995-1999 Russell King
* Author: Nicolas Pitre
* Created: Sep 28, 2005
* Copyright: MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* ASM optimised string functions
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
.text
.macro ldr1w ptr reg abort
ldr \reg, [\ptr], #4
.endm
#define ENTER \
mov ip,sp ;\
stmfd sp!,{r0,r4-r9,fp,ip,lr,pc} ;\
sub fp,ip,#4
.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4}
.endm
#define EXIT \
LOADREGS(ea, fp, {r0, r4 - r9, fp, sp, pc})
.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
.endm
#define EXITEQ \
LOADREGS(eqea, fp, {r0, r4 - r9, fp, sp, pc})
.macro ldr1b ptr reg cond=al abort
ldr\cond\()b \reg, [\ptr], #1
.endm
.macro str1w ptr reg abort
str \reg, [\ptr], #4
.endm
.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8}
.endm
.macro str1b ptr reg cond=al abort
str\cond\()b \reg, [\ptr], #1
.endm
.macro enter reg1 reg2
stmdb sp!, {r0, \reg1, \reg2}
.endm
.macro exit reg1 reg2
ldmfd sp!, {r0, \reg1, \reg2}
.endm
.text
/* Prototype: void *memcpy(void *dest, const void *src, size_t n); */
/*
* Prototype: void memcpy(void *to,const void *from,unsigned long n);
*/
ENTRY(memcpy)
ENTRY(memmove)
ENTER
cmp r1, r0
bcc 23f
subs r2, r2, #4
blt 6f
PLD( pld [r1, #0] )
ands ip, r0, #3
bne 7f
ands ip, r1, #3
bne 8f
1: subs r2, r2, #8
blt 5f
subs r2, r2, #20
blt 4f
PLD( pld [r1, #28] )
PLD( subs r2, r2, #64 )
PLD( blt 3f )
2: PLD( pld [r1, #60] )
PLD( pld [r1, #92] )
ldmia r1!, {r3 - r9, ip}
subs r2, r2, #32
stmgeia r0!, {r3 - r9, ip}
ldmgeia r1!, {r3 - r9, ip}
subges r2, r2, #32
stmia r0!, {r3 - r9, ip}
bge 2b
3: PLD( ldmia r1!, {r3 - r9, ip} )
PLD( adds r2, r2, #32 )
PLD( stmgeia r0!, {r3 - r9, ip} )
PLD( ldmgeia r1!, {r3 - r9, ip} )
PLD( subges r2, r2, #32 )
PLD( stmia r0!, {r3 - r9, ip} )
4: cmn r2, #16
ldmgeia r1!, {r3 - r6}
subge r2, r2, #16
stmgeia r0!, {r3 - r6}
adds r2, r2, #20
ldmgeia r1!, {r3 - r5}
subge r2, r2, #12
stmgeia r0!, {r3 - r5}
5: adds r2, r2, #8
blt 6f
subs r2, r2, #4
ldrlt r3, [r1], #4
ldmgeia r1!, {r4, r5}
subge r2, r2, #4
strlt r3, [r0], #4
stmgeia r0!, {r4, r5}
6: adds r2, r2, #4
EXITEQ
cmp r2, #2
ldrb r3, [r1], #1
ldrgeb r4, [r1], #1
ldrgtb r5, [r1], #1
strb r3, [r0], #1
strgeb r4, [r0], #1
strgtb r5, [r0], #1
EXIT
7: rsb ip, ip, #4
cmp ip, #2
ldrb r3, [r1], #1
ldrgeb r4, [r1], #1
ldrgtb r5, [r1], #1
strb r3, [r0], #1
strgeb r4, [r0], #1
strgtb r5, [r0], #1
subs r2, r2, ip
blt 6b
ands ip, r1, #3
beq 1b
8: bic r1, r1, #3
ldr r7, [r1], #4
cmp ip, #2
bgt 18f
beq 13f
cmp r2, #12
blt 11f
PLD( pld [r1, #12] )
sub r2, r2, #12
PLD( subs r2, r2, #32 )
PLD( blt 10f )
PLD( pld [r1, #28] )
9: PLD( pld [r1, #44] )
10: mov r3, r7, pull #8
ldmia r1!, {r4 - r7}
subs r2, r2, #16
orr r3, r3, r4, push #24
mov r4, r4, pull #8
orr r4, r4, r5, push #24
mov r5, r5, pull #8
orr r5, r5, r6, push #24
mov r6, r6, pull #8
orr r6, r6, r7, push #24
stmia r0!, {r3 - r6}
bge 9b
PLD( cmn r2, #32 )
PLD( bge 10b )
PLD( add r2, r2, #32 )
adds r2, r2, #12
blt 12f
11: mov r3, r7, pull #8
ldr r7, [r1], #4
subs r2, r2, #4
orr r3, r3, r7, push #24
str r3, [r0], #4
bge 11b
12: sub r1, r1, #3
b 6b
13: cmp r2, #12
blt 16f
PLD( pld [r1, #12] )
sub r2, r2, #12
PLD( subs r2, r2, #32 )
PLD( blt 15f )
PLD( pld [r1, #28] )
14: PLD( pld [r1, #44] )
15: mov r3, r7, pull #16
ldmia r1!, {r4 - r7}
subs r2, r2, #16
orr r3, r3, r4, push #16
mov r4, r4, pull #16
orr r4, r4, r5, push #16
mov r5, r5, pull #16
orr r5, r5, r6, push #16
mov r6, r6, pull #16
orr r6, r6, r7, push #16
stmia r0!, {r3 - r6}
bge 14b
PLD( cmn r2, #32 )
PLD( bge 15b )
PLD( add r2, r2, #32 )
adds r2, r2, #12
blt 17f
16: mov r3, r7, pull #16
ldr r7, [r1], #4
subs r2, r2, #4
orr r3, r3, r7, push #16
str r3, [r0], #4
bge 16b
17: sub r1, r1, #2
b 6b
18: cmp r2, #12
blt 21f
PLD( pld [r1, #12] )
sub r2, r2, #12
PLD( subs r2, r2, #32 )
PLD( blt 20f )
PLD( pld [r1, #28] )
19: PLD( pld [r1, #44] )
20: mov r3, r7, pull #24
ldmia r1!, {r4 - r7}
subs r2, r2, #16
orr r3, r3, r4, push #8
mov r4, r4, pull #24
orr r4, r4, r5, push #8
mov r5, r5, pull #24
orr r5, r5, r6, push #8
mov r6, r6, pull #24
orr r6, r6, r7, push #8
stmia r0!, {r3 - r6}
bge 19b
PLD( cmn r2, #32 )
PLD( bge 20b )
PLD( add r2, r2, #32 )
adds r2, r2, #12
blt 22f
21: mov r3, r7, pull #24
ldr r7, [r1], #4
subs r2, r2, #4
orr r3, r3, r7, push #8
str r3, [r0], #4
bge 21b
22: sub r1, r1, #1
b 6b
23: add r1, r1, r2
add r0, r0, r2
subs r2, r2, #4
blt 29f
PLD( pld [r1, #-4] )
ands ip, r0, #3
bne 30f
ands ip, r1, #3
bne 31f
24: subs r2, r2, #8
blt 28f
subs r2, r2, #20
blt 27f
PLD( pld [r1, #-32] )
PLD( subs r2, r2, #64 )
PLD( blt 26f )
25: PLD( pld [r1, #-64] )
PLD( pld [r1, #-96] )
ldmdb r1!, {r3 - r9, ip}
subs r2, r2, #32
stmgedb r0!, {r3 - r9, ip}
ldmgedb r1!, {r3 - r9, ip}
subges r2, r2, #32
stmdb r0!, {r3 - r9, ip}
bge 25b
26: PLD( ldmdb r1!, {r3 - r9, ip} )
PLD( adds r2, r2, #32 )
PLD( stmgedb r0!, {r3 - r9, ip} )
PLD( ldmgedb r1!, {r3 - r9, ip} )
PLD( subges r2, r2, #32 )
PLD( stmdb r0!, {r3 - r9, ip} )
27: cmn r2, #16
ldmgedb r1!, {r3 - r6}
subge r2, r2, #16
stmgedb r0!, {r3 - r6}
adds r2, r2, #20
ldmgedb r1!, {r3 - r5}
subge r2, r2, #12
stmgedb r0!, {r3 - r5}
28: adds r2, r2, #8
blt 29f
subs r2, r2, #4
ldrlt r3, [r1, #-4]!
ldmgedb r1!, {r4, r5}
subge r2, r2, #4
strlt r3, [r0, #-4]!
stmgedb r0!, {r4, r5}
29: adds r2, r2, #4
EXITEQ
cmp r2, #2
ldrb r3, [r1, #-1]!
ldrgeb r4, [r1, #-1]!
ldrgtb r5, [r1, #-1]!
strb r3, [r0, #-1]!
strgeb r4, [r0, #-1]!
strgtb r5, [r0, #-1]!
EXIT
30: cmp ip, #2
ldrb r3, [r1, #-1]!
ldrgeb r4, [r1, #-1]!
ldrgtb r5, [r1, #-1]!
strb r3, [r0, #-1]!
strgeb r4, [r0, #-1]!
strgtb r5, [r0, #-1]!
subs r2, r2, ip
blt 29b
ands ip, r1, #3
beq 24b
31: bic r1, r1, #3
ldr r3, [r1], #0
cmp ip, #2
blt 41f
beq 36f
cmp r2, #12
blt 34f
PLD( pld [r1, #-16] )
sub r2, r2, #12
PLD( subs r2, r2, #32 )
PLD( blt 33f )
PLD( pld [r1, #-32] )
32: PLD( pld [r1, #-48] )
33: mov r7, r3, push #8
ldmdb r1!, {r3, r4, r5, r6}
subs r2, r2, #16
orr r7, r7, r6, pull #24
mov r6, r6, push #8
orr r6, r6, r5, pull #24
mov r5, r5, push #8
orr r5, r5, r4, pull #24
mov r4, r4, push #8
orr r4, r4, r3, pull #24
stmdb r0!, {r4, r5, r6, r7}
bge 32b
PLD( cmn r2, #32 )
PLD( bge 33b )
PLD( add r2, r2, #32 )
adds r2, r2, #12
blt 35f
34: mov ip, r3, push #8
ldr r3, [r1, #-4]!
subs r2, r2, #4
orr ip, ip, r3, pull #24
str ip, [r0, #-4]!
bge 34b
35: add r1, r1, #3
b 29b
36: cmp r2, #12
blt 39f
PLD( pld [r1, #-16] )
sub r2, r2, #12
PLD( subs r2, r2, #32 )
PLD( blt 38f )
PLD( pld [r1, #-32] )
37: PLD( pld [r1, #-48] )
38: mov r7, r3, push #16
ldmdb r1!, {r3, r4, r5, r6}
subs r2, r2, #16
orr r7, r7, r6, pull #16
mov r6, r6, push #16
orr r6, r6, r5, pull #16
mov r5, r5, push #16
orr r5, r5, r4, pull #16
mov r4, r4, push #16
orr r4, r4, r3, pull #16
stmdb r0!, {r4, r5, r6, r7}
bge 37b
PLD( cmn r2, #32 )
PLD( bge 38b )
PLD( add r2, r2, #32 )
adds r2, r2, #12
blt 40f
39: mov ip, r3, push #16
ldr r3, [r1, #-4]!
subs r2, r2, #4
orr ip, ip, r3, pull #16
str ip, [r0, #-4]!
bge 39b
40: add r1, r1, #2
b 29b
41: cmp r2, #12
blt 44f
PLD( pld [r1, #-16] )
sub r2, r2, #12
PLD( subs r2, r2, #32 )
PLD( blt 43f )
PLD( pld [r1, #-32] )
42: PLD( pld [r1, #-48] )
43: mov r7, r3, push #24
ldmdb r1!, {r3, r4, r5, r6}
subs r2, r2, #16
orr r7, r7, r6, pull #8
mov r6, r6, push #24
orr r6, r6, r5, pull #8
mov r5, r5, push #24
orr r5, r5, r4, pull #8
mov r4, r4, push #24
orr r4, r4, r3, pull #8
stmdb r0!, {r4, r5, r6, r7}
bge 42b
PLD( cmn r2, #32 )
PLD( bge 43b )
PLD( add r2, r2, #32 )
adds r2, r2, #12
blt 45f
44: mov ip, r3, push #24
ldr r3, [r1, #-4]!
subs r2, r2, #4
orr ip, ip, r3, pull #8
str ip, [r0, #-4]!
bge 44b
45: add r1, r1, #1
b 29b
#include "copy_template.S"

206
arch/arm/lib/memmove.S Normal file
View file

@ -0,0 +1,206 @@
/*
* linux/arch/arm/lib/memmove.S
*
* Author: Nicolas Pitre
* Created: Sep 28, 2005
* Copyright: (C) MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
/*
* This can be used to enable code to cacheline align the source pointer.
* Experiments on tested architectures (StrongARM and XScale) didn't show
* this a worthwhile thing to do. That might be different in the future.
*/
//#define CALGN(code...) code
#define CALGN(code...)
.text
/*
* Prototype: void *memmove(void *dest, const void *src, size_t n);
*
* Note:
*
* If the memory regions don't overlap, we simply branch to memcpy which is
* normally a bit faster. Otherwise the copy is done going downwards. This
* is a transposition of the code from copy_template.S but with the copy
* occurring in the opposite direction.
*/
ENTRY(memmove)
subs ip, r0, r1
cmphi r2, ip
bls memcpy
stmfd sp!, {r0, r4, lr}
add r1, r1, r2
add r0, r0, r2
subs r2, r2, #4
blt 8f
ands ip, r0, #3
PLD( pld [r1, #-4] )
bne 9f
ands ip, r1, #3
bne 10f
1: subs r2, r2, #(28)
stmfd sp!, {r5 - r8}
blt 5f
CALGN( ands ip, r1, #31 )
CALGN( sbcnes r4, ip, r2 ) @ C is always set here
CALGN( bcs 2f )
CALGN( adr r4, 6f )
CALGN( subs r2, r2, ip ) @ C is set here
CALGN( add pc, r4, ip )
PLD( pld [r1, #-4] )
2: PLD( subs r2, r2, #96 )
PLD( pld [r1, #-32] )
PLD( blt 4f )
PLD( pld [r1, #-64] )
PLD( pld [r1, #-96] )
3: PLD( pld [r1, #-128] )
4: ldmdb r1!, {r3, r4, r5, r6, r7, r8, ip, lr}
subs r2, r2, #32
stmdb r0!, {r3, r4, r5, r6, r7, r8, ip, lr}
bge 3b
PLD( cmn r2, #96 )
PLD( bge 4b )
5: ands ip, r2, #28
rsb ip, ip, #32
addne pc, pc, ip @ C is always clear here
b 7f
6: nop
ldr r3, [r1, #-4]!
ldr r4, [r1, #-4]!
ldr r5, [r1, #-4]!
ldr r6, [r1, #-4]!
ldr r7, [r1, #-4]!
ldr r8, [r1, #-4]!
ldr lr, [r1, #-4]!
add pc, pc, ip
nop
nop
str r3, [r0, #-4]!
str r4, [r0, #-4]!
str r5, [r0, #-4]!
str r6, [r0, #-4]!
str r7, [r0, #-4]!
str r8, [r0, #-4]!
str lr, [r0, #-4]!
CALGN( bcs 2b )
7: ldmfd sp!, {r5 - r8}
8: movs r2, r2, lsl #31
ldrneb r3, [r1, #-1]!
ldrcsb r4, [r1, #-1]!
ldrcsb ip, [r1, #-1]
strneb r3, [r0, #-1]!
strcsb r4, [r0, #-1]!
strcsb ip, [r0, #-1]
ldmfd sp!, {r0, r4, pc}
9: cmp ip, #2
ldrgtb r3, [r1, #-1]!
ldrgeb r4, [r1, #-1]!
ldrb lr, [r1, #-1]!
strgtb r3, [r0, #-1]!
strgeb r4, [r0, #-1]!
subs r2, r2, ip
strb lr, [r0, #-1]!
blt 8b
ands ip, r1, #3
beq 1b
10: bic r1, r1, #3
cmp ip, #2
ldr r3, [r1, #0]
beq 17f
blt 18f
.macro backward_copy_shift push pull
subs r2, r2, #28
blt 14f
CALGN( ands ip, r1, #31 )
CALGN( rsb ip, ip, #32 )
CALGN( sbcnes r4, ip, r2 ) @ C is always set here
CALGN( subcc r2, r2, ip )
CALGN( bcc 15f )
11: stmfd sp!, {r5 - r9}
PLD( pld [r1, #-4] )
PLD( subs r2, r2, #96 )
PLD( pld [r1, #-32] )
PLD( blt 13f )
PLD( pld [r1, #-64] )
PLD( pld [r1, #-96] )
12: PLD( pld [r1, #-128] )
13: ldmdb r1!, {r7, r8, r9, ip}
mov lr, r3, push #\push
subs r2, r2, #32
ldmdb r1!, {r3, r4, r5, r6}
orr lr, lr, ip, pull #\pull
mov ip, ip, push #\push
orr ip, ip, r9, pull #\pull
mov r9, r9, push #\push
orr r9, r9, r8, pull #\pull
mov r8, r8, push #\push
orr r8, r8, r7, pull #\pull
mov r7, r7, push #\push
orr r7, r7, r6, pull #\pull
mov r6, r6, push #\push
orr r6, r6, r5, pull #\pull
mov r5, r5, push #\push
orr r5, r5, r4, pull #\pull
mov r4, r4, push #\push
orr r4, r4, r3, pull #\pull
stmdb r0!, {r4 - r9, ip, lr}
bge 12b
PLD( cmn r2, #96 )
PLD( bge 13b )
ldmfd sp!, {r5 - r9}
14: ands ip, r2, #28
beq 16f
15: mov lr, r3, push #\push
ldr r3, [r1, #-4]!
subs ip, ip, #4
orr lr, lr, r3, pull #\pull
str lr, [r0, #-4]!
bgt 15b
CALGN( cmp r2, #0 )
CALGN( bge 11b )
16: add r1, r1, #(\pull / 8)
b 8b
.endm
backward_copy_shift push=8 pull=24
17: backward_copy_shift push=16 pull=16
18: backward_copy_shift push=24 pull=8

View file

@ -657,41 +657,3 @@ USER( ldrgtbt r3, [r1], #1) @ May fault
LOADREGS(fd,sp!, {r4 - r7, pc})
.previous
/* Prototype: int __arch_clear_user(void *addr, size_t sz)
* Purpose : clear some user memory
* Params : addr - user memory address to clear
* : sz - number of bytes to clear
* Returns : number of bytes NOT cleared
*/
ENTRY(__arch_clear_user)
stmfd sp!, {r1, lr}
mov r2, #0
cmp r1, #4
blt 2f
ands ip, r0, #3
beq 1f
cmp ip, #2
USER( strbt r2, [r0], #1)
USER( strlebt r2, [r0], #1)
USER( strltbt r2, [r0], #1)
rsb ip, ip, #4
sub r1, r1, ip @ 7 6 5 4 3 2 1
1: subs r1, r1, #8 @ -1 -2 -3 -4 -5 -6 -7
USER( strplt r2, [r0], #4)
USER( strplt r2, [r0], #4)
bpl 1b
adds r1, r1, #4 @ 3 2 1 0 -1 -2 -3
USER( strplt r2, [r0], #4)
2: tst r1, #2 @ 1x 1x 0x 0x 1x 1x 0x
USER( strnebt r2, [r0], #1)
USER( strnebt r2, [r0], #1)
tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1
USER( strnebt r2, [r0], #1)
mov r0, #0
LOADREGS(fd,sp!, {r1, pc})
.section .fixup,"ax"
.align 0
9001: LOADREGS(fd,sp!, {r0, pc})
.previous

View file

@ -251,9 +251,33 @@ static struct platform_device serial_device = {
},
};
static struct resource am79c961_resources[] = {
{
.start = 0x220,
.end = 0x238,
.flags = IORESOURCE_IO,
}, {
.start = IRQ_EBSA110_ETHERNET,
.end = IRQ_EBSA110_ETHERNET,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device am79c961_device = {
.name = "am79c961",
.id = -1,
.num_resources = ARRAY_SIZE(am79c961_resources),
.resource = am79c961_resources,
};
static struct platform_device *ebsa110_devices[] = {
&serial_device,
&am79c961_device,
};
static int __init ebsa110_init(void)
{
return platform_device_register(&serial_device);
return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
}
arch_initcall(ebsa110_init);

View file

@ -1,7 +1,7 @@
#
# Makefile for the linux kernel.
#
obj-y := core.o pci.o
obj-y := core.o pci.o uengine.o
obj-m :=
obj-n :=
obj- :=

View file

@ -1,5 +1,5 @@
/*
* arch/arm/mach-ixp2000/common.c
* arch/arm/mach-ixp2000/core.c
*
* Common routines used by all IXP2400/2800 based platforms.
*
@ -49,7 +49,6 @@ static unsigned long ixp2000_slowport_irq_flags;
*************************************************************************/
void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg)
{
spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags);
old_cfg->CCR = *IXP2000_SLOWPORT_CCR;
@ -62,7 +61,7 @@ void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg
ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC);
ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC);
ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR);
ixp2000_reg_write(IXP2000_SLOWPORT_ADC, new_cfg->ADC);
ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, new_cfg->ADC);
}
void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
@ -71,7 +70,7 @@ void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC);
ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC);
ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR);
ixp2000_reg_write(IXP2000_SLOWPORT_ADC, old_cfg->ADC);
ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, old_cfg->ADC);
spin_unlock_irqrestore(&ixp2000_slowport_lock,
ixp2000_slowport_irq_flags);
@ -145,7 +144,7 @@ void __init ixp2000_map_io(void)
iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc));
/* Set slowport to 8-bit mode. */
ixp2000_reg_write(IXP2000_SLOWPORT_FRM, 1);
ixp2000_reg_wrb(IXP2000_SLOWPORT_FRM, 1);
}
@ -209,7 +208,7 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
write_seqlock(&xtime_lock);
/* clear timer 1 */
ixp2000_reg_write(IXP2000_T1_CLR, 1);
ixp2000_reg_wrb(IXP2000_T1_CLR, 1);
while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) {
timer_tick(regs);
@ -252,12 +251,12 @@ void __init ixp2000_init_time(unsigned long tick_rate)
ixp2000_reg_write(IXP2000_T4_CLR, 0);
ixp2000_reg_write(IXP2000_T4_CLD, -1);
ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7));
ixp2000_reg_wrb(IXP2000_T4_CTL, (1 << 7));
missing_jiffy_timer_csr = IXP2000_T4_CSR;
} else {
ixp2000_reg_write(IXP2000_T2_CLR, 0);
ixp2000_reg_write(IXP2000_T2_CLD, -1);
ixp2000_reg_write(IXP2000_T2_CTL, (1 << 7));
ixp2000_reg_wrb(IXP2000_T2_CTL, (1 << 7));
missing_jiffy_timer_csr = IXP2000_T2_CSR;
}
next_jiffy_time = 0xffffffff;
@ -279,7 +278,7 @@ static void update_gpio_int_csrs(void)
ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge);
ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge);
ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low);
ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
ixp2000_reg_wrb(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
}
void gpio_line_config(int line, int direction)
@ -297,9 +296,9 @@ void gpio_line_config(int line, int direction)
GPIO_IRQ_level_high &= ~(1 << line);
update_gpio_int_csrs();
ixp2000_reg_write(IXP2000_GPIO_PDSR, 1 << line);
ixp2000_reg_wrb(IXP2000_GPIO_PDSR, 1 << line);
} else if (direction == GPIO_IN) {
ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line);
ixp2000_reg_wrb(IXP2000_GPIO_PDCR, 1 << line);
}
local_irq_restore(flags);
}
@ -365,12 +364,12 @@ static void ixp2000_GPIO_irq_mask_ack(unsigned int irq)
ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
ixp2000_reg_wrb(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
}
static void ixp2000_GPIO_irq_mask(unsigned int irq)
{
ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
ixp2000_reg_wrb(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
}
static void ixp2000_GPIO_irq_unmask(unsigned int irq)
@ -389,9 +388,9 @@ static void ixp2000_pci_irq_mask(unsigned int irq)
{
unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
if (irq == IRQ_IXP2000_PCIA)
ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26)));
ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26)));
else if (irq == IRQ_IXP2000_PCIB)
ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27)));
ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27)));
}
static void ixp2000_pci_irq_unmask(unsigned int irq)
@ -411,7 +410,7 @@ static struct irqchip ixp2000_pci_irq_chip = {
static void ixp2000_irq_mask(unsigned int irq)
{
ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, (1 << irq));
ixp2000_reg_wrb(IXP2000_IRQ_ENABLE_CLR, (1 << irq));
}
static void ixp2000_irq_unmask(unsigned int irq)
@ -443,7 +442,7 @@ void __init ixp2000_init_irq(void)
ixp2000_reg_write(IXP2000_GPIO_INCR, -1);
/* clear PCI interrupt sources */
ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, 0);
ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, 0);
/*
* Certain bits in the IRQ status register of the

View file

@ -63,6 +63,35 @@ static struct sys_timer enp2611_timer = {
};
/*************************************************************************
* ENP-2611 I/O
*************************************************************************/
static struct map_desc enp2611_io_desc[] __initdata = {
{
.virtual = ENP2611_CALEB_VIRT_BASE,
.physical = ENP2611_CALEB_PHYS_BASE,
.length = ENP2611_CALEB_SIZE,
.type = MT_IXP2000_DEVICE
}, {
.virtual = ENP2611_PM3386_0_VIRT_BASE,
.physical = ENP2611_PM3386_0_PHYS_BASE,
.length = ENP2611_PM3386_0_SIZE,
.type = MT_IXP2000_DEVICE
}, {
.virtual = ENP2611_PM3386_1_VIRT_BASE,
.physical = ENP2611_PM3386_1_PHYS_BASE,
.length = ENP2611_PM3386_1_SIZE,
.type = MT_IXP2000_DEVICE
}
};
void __init enp2611_map_io(void)
{
ixp2000_map_io();
iotable_init(enp2611_io_desc, ARRAY_SIZE(enp2611_io_desc));
}
/*************************************************************************
* ENP-2611 PCI
*************************************************************************/
@ -229,7 +258,7 @@ MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
.phys_io = IXP2000_UART_PHYS_BASE,
.io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = ixp2000_map_io,
.map_io = enp2611_map_io,
.init_irq = ixp2000_init_irq,
.timer = &enp2611_timer,
.init_machine = enp2611_init_machine,

View file

@ -81,7 +81,7 @@ static void ixdp2x00_irq_mask(unsigned int irq)
dummy = *board_irq_mask;
dummy |= IXP2000_BOARD_IRQ_MASK(irq);
ixp2000_reg_write(board_irq_mask, dummy);
ixp2000_reg_wrb(board_irq_mask, dummy);
#ifdef CONFIG_ARCH_IXDP2400
if (machine_is_ixdp2400())
@ -101,7 +101,7 @@ static void ixdp2x00_irq_unmask(unsigned int irq)
dummy = *board_irq_mask;
dummy &= ~IXP2000_BOARD_IRQ_MASK(irq);
ixp2000_reg_write(board_irq_mask, dummy);
ixp2000_reg_wrb(board_irq_mask, dummy);
if (machine_is_ixdp2400())
ixp2000_release_slowport(&old_cfg);

View file

@ -51,7 +51,7 @@
*************************************************************************/
static void ixdp2x01_irq_mask(unsigned int irq)
{
ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG,
ixp2000_reg_wrb(IXDP2X01_INT_MASK_SET_REG,
IXP2000_BOARD_IRQ_MASK(irq));
}
@ -114,7 +114,7 @@ void __init ixdp2x01_init_irq(void)
/* Mask all interrupts from CPLD, disable simulation */
ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff);
ixp2000_reg_write(IXDP2X01_INT_SIM_REG, 0);
ixp2000_reg_wrb(IXDP2X01_INT_SIM_REG, 0);
for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) {
if (irq & valid_irq_mask) {
@ -299,7 +299,6 @@ struct hw_pci ixdp2x01_pci __initdata = {
int __init ixdp2x01_pci_init(void)
{
pci_common_init(&ixdp2x01_pci);
return 0;
}
@ -316,7 +315,7 @@ static struct flash_platform_data ixdp2x01_flash_platform_data = {
static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs)
{
ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN));
return (ofs & IXDP2X01_FLASH_WINDOW_MASK);
}
@ -363,7 +362,7 @@ static struct platform_device *ixdp2x01_devices[] __initdata = {
static void __init ixdp2x01_init_machine(void)
{
ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
(IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN));
ixdp2x01_flash_data.nr_banks =

View file

@ -148,7 +148,7 @@ int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_re
local_irq_save(flags);
temp = *(IXP2000_PCI_CONTROL);
if (temp & ((1 << 8) | (1 << 5))) {
ixp2000_reg_write(IXP2000_PCI_CONTROL, temp);
ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
}
temp = *(IXP2000_PCI_CMDSTAT);
@ -178,8 +178,8 @@ clear_master_aborts(void)
local_irq_save(flags);
temp = *(IXP2000_PCI_CONTROL);
if (temp & ((1 << 8) | (1 << 5))) {
ixp2000_reg_write(IXP2000_PCI_CONTROL, temp);
if (temp & ((1 << 8) | (1 << 5))) {
ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
}
temp = *(IXP2000_PCI_CMDSTAT);

View file

@ -0,0 +1,474 @@
/*
* Generic library functions for the microengines found on the Intel
* IXP2000 series of network processors.
*
* Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
* Dedicated to Marija Kulikova.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as
* published by the Free Software Foundation; either version 2.1 of the
* License, or (at your option) any later version.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/string.h>
#include <asm/hardware.h>
#include <asm/arch/ixp2000-regs.h>
#include <asm/arch/uengine.h>
#include <asm/io.h>
#define USTORE_ADDRESS 0x000
#define USTORE_DATA_LOWER 0x004
#define USTORE_DATA_UPPER 0x008
#define CTX_ENABLES 0x018
#define CC_ENABLE 0x01c
#define CSR_CTX_POINTER 0x020
#define INDIRECT_CTX_STS 0x040
#define ACTIVE_CTX_STS 0x044
#define INDIRECT_CTX_SIG_EVENTS 0x048
#define INDIRECT_CTX_WAKEUP_EVENTS 0x050
#define NN_PUT 0x080
#define NN_GET 0x084
#define TIMESTAMP_LOW 0x0c0
#define TIMESTAMP_HIGH 0x0c4
#define T_INDEX_BYTE_INDEX 0x0f4
#define LOCAL_CSR_STATUS 0x180
u32 ixp2000_uengine_mask;
static void *ixp2000_uengine_csr_area(int uengine)
{
return ((void *)IXP2000_UENGINE_CSR_VIRT_BASE) + (uengine << 10);
}
/*
* LOCAL_CSR_STATUS=1 after a read or write to a microengine's CSR
* space means that the microengine we tried to access was also trying
* to access its own CSR space on the same clock cycle as we did. When
* this happens, we lose the arbitration process by default, and the
* read or write we tried to do was not actually performed, so we try
* again until it succeeds.
*/
u32 ixp2000_uengine_csr_read(int uengine, int offset)
{
void *uebase;
u32 *local_csr_status;
u32 *reg;
u32 value;
uebase = ixp2000_uengine_csr_area(uengine);
local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS);
reg = (u32 *)(uebase + offset);
do {
value = ixp2000_reg_read(reg);
} while (ixp2000_reg_read(local_csr_status) & 1);
return value;
}
EXPORT_SYMBOL(ixp2000_uengine_csr_read);
void ixp2000_uengine_csr_write(int uengine, int offset, u32 value)
{
void *uebase;
u32 *local_csr_status;
u32 *reg;
uebase = ixp2000_uengine_csr_area(uengine);
local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS);
reg = (u32 *)(uebase + offset);
do {
ixp2000_reg_write(reg, value);
} while (ixp2000_reg_read(local_csr_status) & 1);
}
EXPORT_SYMBOL(ixp2000_uengine_csr_write);
void ixp2000_uengine_reset(u32 uengine_mask)
{
ixp2000_reg_write(IXP2000_RESET1, uengine_mask & ixp2000_uengine_mask);
ixp2000_reg_write(IXP2000_RESET1, 0);
}
EXPORT_SYMBOL(ixp2000_uengine_reset);
void ixp2000_uengine_set_mode(int uengine, u32 mode)
{
/*
* CTL_STR_PAR_EN: unconditionally enable parity checking on
* control store.
*/
mode |= 0x10000000;
ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mode);
/*
* Enable updating of condition codes.
*/
ixp2000_uengine_csr_write(uengine, CC_ENABLE, 0x00002000);
/*
* Initialise other per-microengine registers.
*/
ixp2000_uengine_csr_write(uengine, NN_PUT, 0x00);
ixp2000_uengine_csr_write(uengine, NN_GET, 0x00);
ixp2000_uengine_csr_write(uengine, T_INDEX_BYTE_INDEX, 0);
}
EXPORT_SYMBOL(ixp2000_uengine_set_mode);
static int make_even_parity(u32 x)
{
return hweight32(x) & 1;
}
static void ustore_write(int uengine, u64 insn)
{
/*
* Generate even parity for top and bottom 20 bits.
*/
insn |= (u64)make_even_parity((insn >> 20) & 0x000fffff) << 41;
insn |= (u64)make_even_parity(insn & 0x000fffff) << 40;
/*
* Write to microstore. The second write auto-increments
* the USTORE_ADDRESS index register.
*/
ixp2000_uengine_csr_write(uengine, USTORE_DATA_LOWER, (u32)insn);
ixp2000_uengine_csr_write(uengine, USTORE_DATA_UPPER, (u32)(insn >> 32));
}
void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns)
{
int i;
/*
* Start writing to microstore at address 0.
*/
ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x80000000);
for (i = 0; i < insns; i++) {
u64 insn;
insn = (((u64)ucode[0]) << 32) |
(((u64)ucode[1]) << 24) |
(((u64)ucode[2]) << 16) |
(((u64)ucode[3]) << 8) |
((u64)ucode[4]);
ucode += 5;
ustore_write(uengine, insn);
}
/*
* Pad with a few NOPs at the end (to avoid the microengine
* aborting as it prefetches beyond the last instruction), unless
* we run off the end of the instruction store first, at which
* point the address register will wrap back to zero.
*/
for (i = 0; i < 4; i++) {
u32 addr;
addr = ixp2000_uengine_csr_read(uengine, USTORE_ADDRESS);
if (addr == 0x80000000)
break;
ustore_write(uengine, 0xf0000c0300ULL);
}
/*
* End programming.
*/
ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x00000000);
}
EXPORT_SYMBOL(ixp2000_uengine_load_microcode);
void ixp2000_uengine_init_context(int uengine, int context, int pc)
{
/*
* Select the right context for indirect access.
*/
ixp2000_uengine_csr_write(uengine, CSR_CTX_POINTER, context);
/*
* Initialise signal masks to immediately go to Ready state.
*/
ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_SIG_EVENTS, 1);
ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_WAKEUP_EVENTS, 1);
/*
* Set program counter.
*/
ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_STS, pc);
}
EXPORT_SYMBOL(ixp2000_uengine_init_context);
void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask)
{
u32 mask;
/*
* Enable the specified context to go to Executing state.
*/
mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES);
mask |= ctx_mask << 8;
ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask);
}
EXPORT_SYMBOL(ixp2000_uengine_start_contexts);
void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask)
{
u32 mask;
/*
* Disable the Ready->Executing transition. Note that this
* does not stop the context until it voluntarily yields.
*/
mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES);
mask &= ~(ctx_mask << 8);
ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask);
}
EXPORT_SYMBOL(ixp2000_uengine_stop_contexts);
static int check_ixp_type(struct ixp2000_uengine_code *c)
{
u32 product_id;
u32 rev;
product_id = ixp2000_reg_read(IXP2000_PRODUCT_ID);
if (((product_id >> 16) & 0x1f) != 0)
return 0;
switch ((product_id >> 8) & 0xff) {
case 0: /* IXP2800 */
if (!(c->cpu_model_bitmask & 4))
return 0;
break;
case 1: /* IXP2850 */
if (!(c->cpu_model_bitmask & 8))
return 0;
break;
case 2: /* IXP2400 */
if (!(c->cpu_model_bitmask & 2))
return 0;
break;
default:
return 0;
}
rev = product_id & 0xff;
if (rev < c->cpu_min_revision || rev > c->cpu_max_revision)
return 0;
return 1;
}
static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b)
{
int offset;
int i;
offset = 0;
for (i = 0; i < 128; i++) {
u8 b3;
u8 b2;
u8 b1;
u8 b0;
b3 = (gpr_a[i] >> 24) & 0xff;
b2 = (gpr_a[i] >> 16) & 0xff;
b1 = (gpr_a[i] >> 8) & 0xff;
b0 = gpr_a[i] & 0xff;
// immed[@ai, (b1 << 8) | b0]
// 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII
ucode[offset++] = 0xf0;
ucode[offset++] = (b1 >> 4);
ucode[offset++] = (b1 << 4) | 0x0c | (b0 >> 6);
ucode[offset++] = (b0 << 2);
ucode[offset++] = 0x80 | i;
// immed_w1[@ai, (b3 << 8) | b2]
// 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII
ucode[offset++] = 0xf4;
ucode[offset++] = 0x40 | (b3 >> 4);
ucode[offset++] = (b3 << 4) | 0x0c | (b2 >> 6);
ucode[offset++] = (b2 << 2);
ucode[offset++] = 0x80 | i;
}
for (i = 0; i < 128; i++) {
u8 b3;
u8 b2;
u8 b1;
u8 b0;
b3 = (gpr_b[i] >> 24) & 0xff;
b2 = (gpr_b[i] >> 16) & 0xff;
b1 = (gpr_b[i] >> 8) & 0xff;
b0 = gpr_b[i] & 0xff;
// immed[@bi, (b1 << 8) | b0]
// 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV
ucode[offset++] = 0xf0;
ucode[offset++] = (b1 >> 4);
ucode[offset++] = (b1 << 4) | 0x02 | (i >> 6);
ucode[offset++] = (i << 2) | 0x03;
ucode[offset++] = b0;
// immed_w1[@bi, (b3 << 8) | b2]
// 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV
ucode[offset++] = 0xf4;
ucode[offset++] = 0x40 | (b3 >> 4);
ucode[offset++] = (b3 << 4) | 0x02 | (i >> 6);
ucode[offset++] = (i << 2) | 0x03;
ucode[offset++] = b2;
}
// ctx_arb[kill]
ucode[offset++] = 0xe0;
ucode[offset++] = 0x00;
ucode[offset++] = 0x01;
ucode[offset++] = 0x00;
ucode[offset++] = 0x00;
}
static int set_initial_registers(int uengine, struct ixp2000_uengine_code *c)
{
int per_ctx_regs;
u32 *gpr_a;
u32 *gpr_b;
u8 *ucode;
int i;
gpr_a = kmalloc(128 * sizeof(u32), GFP_KERNEL);
gpr_b = kmalloc(128 * sizeof(u32), GFP_KERNEL);
ucode = kmalloc(513 * 5, GFP_KERNEL);
if (gpr_a == NULL || gpr_b == NULL || ucode == NULL) {
kfree(ucode);
kfree(gpr_b);
kfree(gpr_a);
return 1;
}
per_ctx_regs = 16;
if (c->uengine_parameters & IXP2000_UENGINE_4_CONTEXTS)
per_ctx_regs = 32;
memset(gpr_a, 0, sizeof(gpr_a));
memset(gpr_b, 0, sizeof(gpr_b));
for (i = 0; i < 256; i++) {
struct ixp2000_reg_value *r = c->initial_reg_values + i;
u32 *bank;
int inc;
int j;
if (r->reg == -1)
break;
bank = (r->reg & 0x400) ? gpr_b : gpr_a;
inc = (r->reg & 0x80) ? 128 : per_ctx_regs;
j = r->reg & 0x7f;
while (j < 128) {
bank[j] = r->value;
j += inc;
}
}
generate_ucode(ucode, gpr_a, gpr_b);
ixp2000_uengine_load_microcode(uengine, ucode, 513);
ixp2000_uengine_init_context(uengine, 0, 0);
ixp2000_uengine_start_contexts(uengine, 0x01);
for (i = 0; i < 100; i++) {
u32 status;
status = ixp2000_uengine_csr_read(uengine, ACTIVE_CTX_STS);
if (!(status & 0x80000000))
break;
}
ixp2000_uengine_stop_contexts(uengine, 0x01);
kfree(ucode);
kfree(gpr_b);
kfree(gpr_a);
return !!(i == 100);
}
int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c)
{
int ctx;
if (!check_ixp_type(c))
return 1;
if (!(ixp2000_uengine_mask & (1 << uengine)))
return 1;
ixp2000_uengine_reset(1 << uengine);
ixp2000_uengine_set_mode(uengine, c->uengine_parameters);
if (set_initial_registers(uengine, c))
return 1;
ixp2000_uengine_load_microcode(uengine, c->insns, c->num_insns);
for (ctx = 0; ctx < 8; ctx++)
ixp2000_uengine_init_context(uengine, ctx, 0);
return 0;
}
EXPORT_SYMBOL(ixp2000_uengine_load);
static int __init ixp2000_uengine_init(void)
{
int uengine;
u32 value;
/*
* Determine number of microengines present.
*/
switch ((ixp2000_reg_read(IXP2000_PRODUCT_ID) >> 8) & 0x1fff) {
case 0: /* IXP2800 */
case 1: /* IXP2850 */
ixp2000_uengine_mask = 0x00ff00ff;
break;
case 2: /* IXP2400 */
ixp2000_uengine_mask = 0x000f000f;
break;
default:
printk(KERN_INFO "Detected unknown IXP2000 model (%.8x)\n",
(unsigned int)ixp2000_reg_read(IXP2000_PRODUCT_ID));
ixp2000_uengine_mask = 0x00000000;
break;
}
/*
* Reset microengines.
*/
ixp2000_reg_write(IXP2000_RESET1, ixp2000_uengine_mask);
ixp2000_reg_write(IXP2000_RESET1, 0);
/*
* Synchronise timestamp counters across all microengines.
*/
value = ixp2000_reg_read(IXP2000_MISC_CONTROL);
ixp2000_reg_write(IXP2000_MISC_CONTROL, value & ~0x80);
for (uengine = 0; uengine < 32; uengine++) {
if (ixp2000_uengine_mask & (1 << uengine)) {
ixp2000_uengine_csr_write(uengine, TIMESTAMP_LOW, 0);
ixp2000_uengine_csr_write(uengine, TIMESTAMP_HIGH, 0);
}
}
ixp2000_reg_write(IXP2000_MISC_CONTROL, value | 0x80);
return 0;
}
subsys_initcall(ixp2000_uengine_init);

View file

@ -175,7 +175,7 @@ static struct platform_device sa1111_device = {
static struct resource smc91x_resources[] = {
[0] = {
.name = "smc91x-regs",
.start = 0x0c000000,
.start = 0x0c000c00,
.end = 0x0c0fffff,
.flags = IORESOURCE_MEM,
},
@ -224,18 +224,75 @@ static struct pxafb_mach_info sharp_lm8v31 __initdata = {
.lccr3 = LCCR3_PCP | LCCR3_Acb(255),
};
static int lubbock_mci_init(struct device *dev, irqreturn_t (*lubbock_detect_int)(int, void *, struct pt_regs *), void *data)
#define MMC_POLL_RATE msecs_to_jiffies(1000)
static void lubbock_mmc_poll(unsigned long);
static irqreturn_t (*mmc_detect_int)(int, void *, struct pt_regs *);
static struct timer_list mmc_timer = {
.function = lubbock_mmc_poll,
};
static void lubbock_mmc_poll(unsigned long data)
{
unsigned long flags;
/* clear any previous irq state, then ... */
local_irq_save(flags);
LUB_IRQ_SET_CLR &= ~(1 << 0);
local_irq_restore(flags);
/* poll until mmc/sd card is removed */
if (LUB_IRQ_SET_CLR & (1 << 0))
mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
else {
(void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data, NULL);
enable_irq(LUBBOCK_SD_IRQ);
}
}
static irqreturn_t lubbock_detect_int(int irq, void *data, struct pt_regs *regs)
{
/* IRQ is level triggered; disable, and poll for removal */
disable_irq(irq);
mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
return mmc_detect_int(irq, data, regs);
}
static int lubbock_mci_init(struct device *dev,
irqreturn_t (*detect_int)(int, void *, struct pt_regs *),
void *data)
{
/* setup GPIO for PXA25x MMC controller */
pxa_gpio_mode(GPIO6_MMCCLK_MD);
pxa_gpio_mode(GPIO8_MMCCS0_MD);
return 0;
/* detect card insert/eject */
mmc_detect_int = detect_int;
init_timer(&mmc_timer);
mmc_timer.data = (unsigned long) data;
return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
SA_SAMPLE_RANDOM, "lubbock-sd-detect", data);
}
static int lubbock_mci_get_ro(struct device *dev)
{
return (LUB_MISC_RD & (1 << 2)) != 0;
}
static void lubbock_mci_exit(struct device *dev, void *data)
{
free_irq(LUBBOCK_SD_IRQ, data);
del_timer_sync(&mmc_timer);
}
static struct pxamci_platform_data lubbock_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.detect_delay = 1,
.init = lubbock_mci_init,
.get_ro = lubbock_mci_get_ro,
.exit = lubbock_mci_exit,
};
static void lubbock_irda_transceiver_mode(struct device *dev, int mode)

View file

@ -0,0 +1,11 @@
menu "RealView platform type"
depends on ARCH_REALVIEW
config MACH_REALVIEW_EB
bool "Support RealView/EB platform"
default n
select ARM_GIC
help
Include support for the ARM(R) RealView Emulation Baseboard platform.
endmenu

View file

@ -0,0 +1,6 @@
#
# Makefile for the linux kernel.
#
obj-y := core.o clock.o
obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o

View file

@ -0,0 +1,4 @@
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000

View file

@ -0,0 +1,145 @@
/*
* linux/arch/arm/mach-realview/clock.c
*
* Copyright (C) 2004 ARM Limited.
* Written by Deep Blue Solutions Limited.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <asm/semaphore.h>
#include <asm/hardware/clock.h>
#include <asm/hardware/icst307.h>
#include "clock.h"
static LIST_HEAD(clocks);
static DECLARE_MUTEX(clocks_sem);
struct clk *clk_get(struct device *dev, const char *id)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
down(&clocks_sem);
list_for_each_entry(p, &clocks, node) {
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
up(&clocks_sem);
return clk;
}
EXPORT_SYMBOL(clk_get);
void clk_put(struct clk *clk)
{
module_put(clk->owner);
}
EXPORT_SYMBOL(clk_put);
int clk_enable(struct clk *clk)
{
return 0;
}
EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_disable);
int clk_use(struct clk *clk)
{
return 0;
}
EXPORT_SYMBOL(clk_use);
void clk_unuse(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_unuse);
unsigned long clk_get_rate(struct clk *clk)
{
return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
long clk_round_rate(struct clk *clk, unsigned long rate)
{
return rate;
}
EXPORT_SYMBOL(clk_round_rate);
int clk_set_rate(struct clk *clk, unsigned long rate)
{
int ret = -EIO;
if (clk->setvco) {
struct icst307_vco vco;
vco = icst307_khz_to_vco(clk->params, rate / 1000);
clk->rate = icst307_khz(clk->params, vco) * 1000;
printk("Clock %s: setting VCO reg params: S=%d R=%d V=%d\n",
clk->name, vco.s, vco.r, vco.v);
clk->setvco(clk, vco);
ret = 0;
}
return ret;
}
EXPORT_SYMBOL(clk_set_rate);
/*
* These are fixed clocks.
*/
static struct clk kmi_clk = {
.name = "KMIREFCLK",
.rate = 24000000,
};
static struct clk uart_clk = {
.name = "UARTCLK",
.rate = 24000000,
};
static struct clk mmci_clk = {
.name = "MCLK",
.rate = 33000000,
};
int clk_register(struct clk *clk)
{
down(&clocks_sem);
list_add(&clk->node, &clocks);
up(&clocks_sem);
return 0;
}
EXPORT_SYMBOL(clk_register);
void clk_unregister(struct clk *clk)
{
down(&clocks_sem);
list_del(&clk->node);
up(&clocks_sem);
}
EXPORT_SYMBOL(clk_unregister);
static int __init clk_init(void)
{
clk_register(&kmi_clk);
clk_register(&uart_clk);
clk_register(&mmci_clk);
return 0;
}
arch_initcall(clk_init);

View file

@ -0,0 +1,25 @@
/*
* linux/arch/arm/mach-realview/clock.h
*
* Copyright (C) 2004 ARM Limited.
* Written by Deep Blue Solutions Limited.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
struct module;
struct icst307_params;
struct clk {
struct list_head node;
unsigned long rate;
struct module *owner;
const char *name;
const struct icst307_params *params;
void *data;
void (*setvco)(struct clk *, struct icst307_vco vco);
};
int clk_register(struct clk *clk);
void clk_unregister(struct clk *clk);

View file

@ -0,0 +1,605 @@
/*
* linux/arch/arm/mach-realview/core.c
*
* Copyright (C) 1999 - 2003 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <asm/system.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/amba_clcd.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst307.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <asm/mach/mmc.h>
#include <asm/hardware/gic.h>
#include "core.h"
#include "clock.h"
#define REALVIEW_REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
/*
* This is the RealView sched_clock implementation. This has
* a resolution of 41.7ns, and a maximum value of about 179s.
*/
unsigned long long sched_clock(void)
{
unsigned long long v;
v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125;
do_div(v, 3);
return v;
}
#define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
static int realview_flash_init(void)
{
u32 val;
val = __raw_readl(REALVIEW_FLASHCTRL);
val &= ~REALVIEW_FLASHPROG_FLVPPEN;
__raw_writel(val, REALVIEW_FLASHCTRL);
return 0;
}
static void realview_flash_exit(void)
{
u32 val;
val = __raw_readl(REALVIEW_FLASHCTRL);
val &= ~REALVIEW_FLASHPROG_FLVPPEN;
__raw_writel(val, REALVIEW_FLASHCTRL);
}
static void realview_flash_set_vpp(int on)
{
u32 val;
val = __raw_readl(REALVIEW_FLASHCTRL);
if (on)
val |= REALVIEW_FLASHPROG_FLVPPEN;
else
val &= ~REALVIEW_FLASHPROG_FLVPPEN;
__raw_writel(val, REALVIEW_FLASHCTRL);
}
static struct flash_platform_data realview_flash_data = {
.map_name = "cfi_probe",
.width = 4,
.init = realview_flash_init,
.exit = realview_flash_exit,
.set_vpp = realview_flash_set_vpp,
};
static struct resource realview_flash_resource = {
.start = REALVIEW_FLASH_BASE,
.end = REALVIEW_FLASH_BASE + REALVIEW_FLASH_SIZE,
.flags = IORESOURCE_MEM,
};
struct platform_device realview_flash_device = {
.name = "armflash",
.id = 0,
.dev = {
.platform_data = &realview_flash_data,
},
.num_resources = 1,
.resource = &realview_flash_resource,
};
static struct resource realview_smc91x_resources[] = {
[0] = {
.start = REALVIEW_ETH_BASE,
.end = REALVIEW_ETH_BASE + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_ETH,
.end = IRQ_ETH,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device realview_smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(realview_smc91x_resources),
.resource = realview_smc91x_resources,
};
#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
static unsigned int realview_mmc_status(struct device *dev)
{
struct amba_device *adev = container_of(dev, struct amba_device, dev);
u32 mask;
if (adev->res.start == REALVIEW_MMCI0_BASE)
mask = 1;
else
mask = 2;
return readl(REALVIEW_SYSMCI) & mask;
}
struct mmc_platform_data realview_mmc0_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = realview_mmc_status,
};
struct mmc_platform_data realview_mmc1_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = realview_mmc_status,
};
/*
* Clock handling
*/
static const struct icst307_params realview_oscvco_params = {
.ref = 24000,
.vco_max = 200000,
.vd_min = 4 + 8,
.vd_max = 511 + 8,
.rd_min = 1 + 2,
.rd_max = 127 + 2,
};
static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
{
void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC1_OFFSET;
u32 val;
val = readl(sys_osc) & ~0x7ffff;
val |= vco.v | (vco.r << 9) | (vco.s << 16);
writel(0xa05f, sys_lock);
writel(val, sys_osc);
writel(0, sys_lock);
}
struct clk realview_clcd_clk = {
.name = "CLCDCLK",
.params = &realview_oscvco_params,
.setvco = realview_oscvco_set,
};
/*
* CLCD support.
*/
#define SYS_CLCD_MODE_MASK (3 << 0)
#define SYS_CLCD_MODE_888 (0 << 0)
#define SYS_CLCD_MODE_5551 (1 << 0)
#define SYS_CLCD_MODE_565_RLSB (2 << 0)
#define SYS_CLCD_MODE_565_BLSB (3 << 0)
#define SYS_CLCD_NLCDIOON (1 << 2)
#define SYS_CLCD_VDDPOSSWITCH (1 << 3)
#define SYS_CLCD_PWR3V5SWITCH (1 << 4)
#define SYS_CLCD_ID_MASK (0x1f << 8)
#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8)
#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8)
#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8)
#define SYS_CLCD_ID_VGA (0x1f << 8)
static struct clcd_panel vga = {
.mode = {
.name = "VGA",
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 39721,
.left_margin = 40,
.right_margin = 24,
.upper_margin = 32,
.lower_margin = 11,
.hsync_len = 96,
.vsync_len = 2,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
.width = -1,
.height = -1,
.tim2 = TIM2_BCD | TIM2_IPC,
.cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
.bpp = 16,
};
static struct clcd_panel sanyo_3_8_in = {
.mode = {
.name = "Sanyo QVGA",
.refresh = 116,
.xres = 320,
.yres = 240,
.pixclock = 100000,
.left_margin = 6,
.right_margin = 6,
.upper_margin = 5,
.lower_margin = 5,
.hsync_len = 6,
.vsync_len = 6,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
.width = -1,
.height = -1,
.tim2 = TIM2_BCD,
.cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
.bpp = 16,
};
static struct clcd_panel sanyo_2_5_in = {
.mode = {
.name = "Sanyo QVGA Portrait",
.refresh = 116,
.xres = 240,
.yres = 320,
.pixclock = 100000,
.left_margin = 20,
.right_margin = 10,
.upper_margin = 2,
.lower_margin = 2,
.hsync_len = 10,
.vsync_len = 2,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED,
},
.width = -1,
.height = -1,
.tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC,
.cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
.bpp = 16,
};
static struct clcd_panel epson_2_2_in = {
.mode = {
.name = "Epson QCIF",
.refresh = 390,
.xres = 176,
.yres = 220,
.pixclock = 62500,
.left_margin = 3,
.right_margin = 2,
.upper_margin = 1,
.lower_margin = 0,
.hsync_len = 3,
.vsync_len = 2,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
.width = -1,
.height = -1,
.tim2 = TIM2_BCD | TIM2_IPC,
.cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1),
.bpp = 16,
};
/*
* Detect which LCD panel is connected, and return the appropriate
* clcd_panel structure. Note: we do not have any information on
* the required timings for the 8.4in panel, so we presently assume
* VGA timings.
*/
static struct clcd_panel *realview_clcd_panel(void)
{
void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
struct clcd_panel *panel = &vga;
u32 val;
val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
if (val == SYS_CLCD_ID_SANYO_3_8)
panel = &sanyo_3_8_in;
else if (val == SYS_CLCD_ID_SANYO_2_5)
panel = &sanyo_2_5_in;
else if (val == SYS_CLCD_ID_EPSON_2_2)
panel = &epson_2_2_in;
else if (val == SYS_CLCD_ID_VGA)
panel = &vga;
else {
printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
val);
panel = &vga;
}
return panel;
}
/*
* Disable all display connectors on the interface module.
*/
static void realview_clcd_disable(struct clcd_fb *fb)
{
void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
u32 val;
val = readl(sys_clcd);
val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
writel(val, sys_clcd);
}
/*
* Enable the relevant connector on the interface module.
*/
static void realview_clcd_enable(struct clcd_fb *fb)
{
void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
u32 val;
val = readl(sys_clcd);
val &= ~SYS_CLCD_MODE_MASK;
switch (fb->fb.var.green.length) {
case 5:
val |= SYS_CLCD_MODE_5551;
break;
case 6:
val |= SYS_CLCD_MODE_565_RLSB;
break;
case 8:
val |= SYS_CLCD_MODE_888;
break;
}
/*
* Set the MUX
*/
writel(val, sys_clcd);
/*
* And now enable the PSUs
*/
val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
writel(val, sys_clcd);
}
static unsigned long framesize = SZ_1M;
static int realview_clcd_setup(struct clcd_fb *fb)
{
dma_addr_t dma;
fb->panel = realview_clcd_panel();
fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
&dma, GFP_KERNEL);
if (!fb->fb.screen_base) {
printk(KERN_ERR "CLCD: unable to map framebuffer\n");
return -ENOMEM;
}
fb->fb.fix.smem_start = dma;
fb->fb.fix.smem_len = framesize;
return 0;
}
static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
{
return dma_mmap_writecombine(&fb->dev->dev, vma,
fb->fb.screen_base,
fb->fb.fix.smem_start,
fb->fb.fix.smem_len);
}
static void realview_clcd_remove(struct clcd_fb *fb)
{
dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
fb->fb.screen_base, fb->fb.fix.smem_start);
}
struct clcd_board clcd_plat_data = {
.name = "RealView",
.check = clcdfb_check,
.decode = clcdfb_decode,
.disable = realview_clcd_disable,
.enable = realview_clcd_enable,
.setup = realview_clcd_setup,
.mmap = realview_clcd_mmap,
.remove = realview_clcd_remove,
};
#ifdef CONFIG_LEDS
#define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
void realview_leds_event(led_event_t ledevt)
{
unsigned long flags;
u32 val;
local_irq_save(flags);
val = readl(VA_LEDS_BASE);
switch (ledevt) {
case led_idle_start:
val = val & ~REALVIEW_SYS_LED0;
break;
case led_idle_end:
val = val | REALVIEW_SYS_LED0;
break;
case led_timer:
val = val ^ REALVIEW_SYS_LED1;
break;
case led_halted:
val = 0;
break;
default:
break;
}
writel(val, VA_LEDS_BASE);
local_irq_restore(flags);
}
#endif /* CONFIG_LEDS */
/*
* Where is the timer (VA)?
*/
#define TIMER0_VA_BASE __io_address(REALVIEW_TIMER0_1_BASE)
#define TIMER1_VA_BASE (__io_address(REALVIEW_TIMER0_1_BASE) + 0x20)
#define TIMER2_VA_BASE __io_address(REALVIEW_TIMER2_3_BASE)
#define TIMER3_VA_BASE (__io_address(REALVIEW_TIMER2_3_BASE) + 0x20)
/*
* How long is the timer interval?
*/
#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
#if TIMER_INTERVAL >= 0x100000
#define TIMER_RELOAD (TIMER_INTERVAL >> 8)
#define TIMER_DIVISOR (TIMER_CTRL_DIV256)
#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
#elif TIMER_INTERVAL >= 0x10000
#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */
#define TIMER_DIVISOR (TIMER_CTRL_DIV16)
#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
#else
#define TIMER_RELOAD (TIMER_INTERVAL)
#define TIMER_DIVISOR (TIMER_CTRL_DIV1)
#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
#endif
/*
* Returns number of ms since last clock interrupt. Note that interrupts
* will have been disabled by do_gettimeoffset()
*/
static unsigned long realview_gettimeoffset(void)
{
unsigned long ticks1, ticks2, status;
/*
* Get the current number of ticks. Note that there is a race
* condition between us reading the timer and checking for
* an interrupt. We get around this by ensuring that the
* counter has not reloaded between our two reads.
*/
ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
do {
ticks1 = ticks2;
status = __raw_readl(__io_address(REALVIEW_GIC_DIST_BASE + GIC_DIST_PENDING_SET)
+ ((IRQ_TIMERINT0_1 >> 5) << 2));
ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
} while (ticks2 > ticks1);
/*
* Number of ticks since last interrupt.
*/
ticks1 = TIMER_RELOAD - ticks2;
/*
* Interrupt pending? If so, we've reloaded once already.
*
* FIXME: Need to check this is effectively timer 0 that expires
*/
if (status & IRQMASK_TIMERINT0_1)
ticks1 += TIMER_RELOAD;
/*
* Convert the ticks to usecs
*/
return TICKS2USECS(ticks1);
}
/*
* IRQ handler for the timer
*/
static irqreturn_t realview_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
write_seqlock(&xtime_lock);
// ...clear the interrupt
writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
timer_tick(regs);
write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
static struct irqaction realview_timer_irq = {
.name = "RealView Timer Tick",
.flags = SA_INTERRUPT | SA_TIMER,
.handler = realview_timer_interrupt,
};
/*
* Set up timer interrupt, and return the current time in seconds.
*/
static void __init realview_timer_init(void)
{
u32 val;
/*
* set clock frequency:
* REALVIEW_REFCLK is 32KHz
* REALVIEW_TIMCLK is 1MHz
*/
val = readl(__io_address(REALVIEW_SCTL_BASE));
writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) |
(REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) |
(REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) |
(REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val,
__io_address(REALVIEW_SCTL_BASE));
/*
* Initialise to a known state (all timers off)
*/
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
writel(0, TIMER3_VA_BASE + TIMER_CTRL);
writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE);
writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC |
TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL);
/*
* Make irqs happen for the system timer
*/
setup_irq(IRQ_TIMERINT0_1, &realview_timer_irq);
}
struct sys_timer realview_timer = {
.init = realview_timer_init,
.offset = realview_gettimeoffset,
};

View file

@ -0,0 +1,118 @@
/*
* linux/arch/arm/mach-realview/core.h
*
* Copyright (C) 2004 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_REALVIEW_H
#define __ASM_ARCH_REALVIEW_H
#include <asm/hardware/amba.h>
#include <asm/io.h>
#define __io_address(n) __io(IO_ADDRESS(n))
extern struct sys_timer realview_timer;
#define AMBA_DEVICE(name,busid,base,plat) \
static struct amba_device name##_device = { \
.dev = { \
.coherent_dma_mask = ~0, \
.bus_id = busid, \
.platform_data = plat, \
}, \
.res = { \
.start = REALVIEW_##base##_BASE, \
.end = (REALVIEW_##base##_BASE) + SZ_4K - 1,\
.flags = IORESOURCE_MEM, \
}, \
.dma_mask = ~0, \
.irq = base##_IRQ, \
/* .dma = base##_DMA,*/ \
}
/*
* These devices are connected via the core APB bridge
*/
#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ }
#define GPIO2_DMA { 0, 0 }
#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ }
#define GPIO3_DMA { 0, 0 }
#define AACI_IRQ { IRQ_AACI, NO_IRQ }
#define AACI_DMA { 0x80, 0x81 }
#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_MMCI0B }
#define MMCI0_DMA { 0x84, 0 }
#define KMI0_IRQ { IRQ_KMI0, NO_IRQ }
#define KMI0_DMA { 0, 0 }
#define KMI1_IRQ { IRQ_KMI1, NO_IRQ }
#define KMI1_DMA { 0, 0 }
/*
* These devices are connected directly to the multi-layer AHB switch
*/
#define SMC_IRQ { NO_IRQ, NO_IRQ }
#define SMC_DMA { 0, 0 }
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
#define MPMC_DMA { 0, 0 }
#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ }
#define CLCD_DMA { 0, 0 }
#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ }
#define DMAC_DMA { 0, 0 }
/*
* These devices are connected via the core APB bridge
*/
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
#define SCTL_DMA { 0, 0 }
#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ }
#define WATCHDOG_DMA { 0, 0 }
#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ }
#define GPIO0_DMA { 0, 0 }
#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ }
#define GPIO1_DMA { 0, 0 }
#define RTC_IRQ { IRQ_RTCINT, NO_IRQ }
#define RTC_DMA { 0, 0 }
/*
* These devices are connected via the DMA APB bridge
*/
#define SCI_IRQ { IRQ_SCIINT, NO_IRQ }
#define SCI_DMA { 7, 6 }
#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ }
#define UART0_DMA { 15, 14 }
#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ }
#define UART1_DMA { 13, 12 }
#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ }
#define UART2_DMA { 11, 10 }
#define UART3_IRQ { IRQ_UART3, NO_IRQ }
#define UART3_DMA { 0x86, 0x87 }
#define SSP_IRQ { IRQ_SSPINT, NO_IRQ }
#define SSP_DMA { 9, 8 }
extern struct platform_device realview_flash_device;
extern struct platform_device realview_smc91x_device;
extern struct mmc_platform_data realview_mmc0_plat_data;
extern struct mmc_platform_data realview_mmc1_plat_data;
extern struct clk realview_clcd_clk;
extern struct clcd_board clcd_plat_data;
extern void realview_leds_event(led_event_t ledevt);
#endif

View file

@ -0,0 +1,142 @@
/*
* linux/arch/arm/mach-realview/realview_eb.c
*
* Copyright (C) 2004 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/amba.h>
#include <asm/hardware/icst307.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/mmc.h>
#include <asm/arch/irqs.h>
#include "core.h"
#include "clock.h"
static struct map_desc realview_eb_io_desc[] __initdata = {
{ IO_ADDRESS(REALVIEW_SYS_BASE), REALVIEW_SYS_BASE, SZ_4K, MT_DEVICE },
{ IO_ADDRESS(REALVIEW_GIC_CPU_BASE), REALVIEW_GIC_CPU_BASE, SZ_4K, MT_DEVICE },
{ IO_ADDRESS(REALVIEW_GIC_DIST_BASE), REALVIEW_GIC_DIST_BASE, SZ_4K, MT_DEVICE },
{ IO_ADDRESS(REALVIEW_SCTL_BASE), REALVIEW_SCTL_BASE, SZ_4K, MT_DEVICE },
{ IO_ADDRESS(REALVIEW_TIMER0_1_BASE), REALVIEW_TIMER0_1_BASE, SZ_4K, MT_DEVICE },
{ IO_ADDRESS(REALVIEW_TIMER2_3_BASE), REALVIEW_TIMER2_3_BASE, SZ_4K, MT_DEVICE },
#ifdef CONFIG_DEBUG_LL
{ IO_ADDRESS(REALVIEW_UART0_BASE), REALVIEW_UART0_BASE, SZ_4K, MT_DEVICE },
#endif
};
static void __init realview_eb_map_io(void)
{
iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc));
}
/* FPGA Primecells */
AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
AMBA_DEVICE(uart3, "fpga:09", UART3, NULL);
/* DevChip Primecells */
AMBA_DEVICE(smc, "dev:00", SMC, NULL);
AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
AMBA_DEVICE(gpio0, "dev:e4", GPIO0, NULL);
AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
AMBA_DEVICE(rtc, "dev:e8", RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
AMBA_DEVICE(uart1, "dev:f2", UART1, NULL);
AMBA_DEVICE(uart2, "dev:f3", UART2, NULL);
AMBA_DEVICE(ssp0, "dev:f4", SSP, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
&uart0_device,
&uart1_device,
&uart2_device,
&uart3_device,
&smc_device,
&clcd_device,
&sctl_device,
&wdog_device,
&gpio0_device,
&gpio1_device,
&gpio2_device,
&rtc_device,
&sci0_device,
&ssp0_device,
&aaci_device,
&mmc0_device,
&kmi0_device,
&kmi1_device,
};
static void __init gic_init_irq(void)
{
gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE));
gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
}
static void __init realview_eb_init(void)
{
int i;
clk_register(&realview_clcd_clk);
platform_device_register(&realview_flash_device);
platform_device_register(&realview_smc91x_device);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
}
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.phys_ram = 0x00000000,
.phys_io = REALVIEW_UART0_BASE,
.io_pg_offst = (IO_ADDRESS(REALVIEW_UART0_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = realview_eb_map_io,
.init_irq = gic_init_irq,
.timer = &realview_timer,
.init_machine = realview_eb_init,
MACHINE_END

View file

@ -17,6 +17,7 @@
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 14-Mar-2005 BJD Fixed __iomem warnings
* 20-Sep-2005 BJD Added static to non-exported items
* 31-Oct-2005 BJD Added LCD setup for framebuffer
*/
#include <linux/kernel.h>
@ -43,6 +44,9 @@
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-lcd.h>
#include <asm/arch/fb.h>
#include "clock.h"
#include "devs.h"
@ -97,6 +101,66 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
}
};
/* framebuffer lcd controller information */
static struct s3c2410fb_mach_info rx3715_lcdcfg __initdata = {
.regs = {
.lcdcon1 = S3C2410_LCDCON1_TFT16BPP | \
S3C2410_LCDCON1_TFT | \
S3C2410_LCDCON1_CLKVAL(0x0C),
.lcdcon2 = S3C2410_LCDCON2_VBPD(5) | \
S3C2410_LCDCON2_LINEVAL(319) | \
S3C2410_LCDCON2_VFPD(6) | \
S3C2410_LCDCON2_VSPW(2),
.lcdcon3 = S3C2410_LCDCON3_HBPD(35) | \
S3C2410_LCDCON3_HOZVAL(239) | \
S3C2410_LCDCON3_HFPD(35),
.lcdcon4 = S3C2410_LCDCON4_MVAL(0) | \
S3C2410_LCDCON4_HSPW(7),
.lcdcon5 = S3C2410_LCDCON5_INVVLINE |
S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_HWSWP,
},
.lpcsel = 0xf82,
.gpccon = 0xaa955699,
.gpccon_mask = 0xffc003cc,
.gpcup = 0x0000ffff,
.gpcup_mask = 0xffffffff,
.gpdcon = 0xaa95aaa1,
.gpdcon_mask = 0xffc0fff0,
.gpdup = 0x0000faff,
.gpdup_mask = 0xffffffff,
.fixed_syncs = 1,
.width = 240,
.height = 320,
.xres = {
.min = 240,
.max = 240,
.defval = 240,
},
.yres = {
.max = 320,
.min = 320,
.defval = 320,
},
.bpp = {
.min = 16,
.max = 16,
.defval = 16,
},
};
static struct platform_device *rx3715_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
@ -123,14 +187,12 @@ static void __init rx3715_init_irq(void)
s3c24xx_init_irq();
}
#ifdef CONFIG_PM
static void __init rx3715_init_machine(void)
{
s3c2410_pm_init();
s3c24xx_fb_set_platdata(&rx3715_lcdcfg);
}
#else
#define rx3715_init_machine NULL
#endif
MACHINE_START(RX3715, "IPAQ-RX3715")
/* Maintainer: Ben Dooks <ben@fluff.org> */

View file

@ -120,8 +120,8 @@ config CPU_ARM925T
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor" if ARCH_INTEGRATOR
depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX
bool "Support ARM926T processor"
depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB
default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX
select CPU_32v5
select CPU_ABRT_EV5TJ
@ -242,7 +242,7 @@ config CPU_XSCALE
# ARMv6
config CPU_V6
bool "Support ARM V6 processor"
depends on ARCH_INTEGRATOR
depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB
select CPU_32v6
select CPU_ABRT_EV6
select CPU_CACHE_V6

View file

@ -11,7 +11,7 @@
*
* Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund
*
* And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>,
* And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>,
* Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com>
*
* Major cleanup by Deepak Saxena <dsaxena@plexity.net>, 01/2005:
@ -184,7 +184,7 @@ iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
do {
interrupted = wait_event_interruptible_timeout (
iop3xx_adap->waitq,
(done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )),
(done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )),
1 * HZ;
);
if ((rc = iop3xx_i2c_error(sr)) < 0) {
@ -472,9 +472,10 @@ iop3xx_i2c_probe(struct device *dev)
goto release_region;
}
res = request_irq(platform_get_irq(pdev, 0), iop3xx_i2c_irq_handler, 0,
ret = request_irq(platform_get_irq(pdev, 0), iop3xx_i2c_irq_handler, 0,
pdev->name, adapter_data);
if (res) {
if (ret) {
ret = -EIO;
goto unmap;
}

View file

@ -26,11 +26,11 @@
#include <linux/init.h>
#include <linux/crc32.h>
#include <linux/bitops.h>
#include <linux/platform_device.h>
#include <asm/system.h>
#include <asm/irq.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/system.h>
#define TX_BUFFERS 15
#define RX_BUFFERS 25
@ -280,10 +280,13 @@ static void am79c961_timer(unsigned long data)
lnkstat = read_ireg(dev->base_addr, ISALED0) & ISALED0_LNKST;
carrier = netif_carrier_ok(dev);
if (lnkstat && !carrier)
if (lnkstat && !carrier) {
netif_carrier_on(dev);
else if (!lnkstat && carrier)
printk("%s: link up\n", dev->name);
} else if (!lnkstat && carrier) {
netif_carrier_off(dev);
printk("%s: link down\n", dev->name);
}
mod_timer(&priv->timer, jiffies + msecs_to_jiffies(500));
}
@ -665,17 +668,25 @@ static void __init am79c961_banner(void)
printk(KERN_INFO "%s", version);
}
static int __init am79c961_init(void)
static int __init am79c961_probe(struct device *_dev)
{
struct platform_device *pdev = to_platform_device(_dev);
struct resource *res;
struct net_device *dev;
struct dev_priv *priv;
int i, ret;
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (!res)
return -ENODEV;
dev = alloc_etherdev(sizeof(struct dev_priv));
ret = -ENOMEM;
if (!dev)
goto out;
SET_NETDEV_DEV(dev, &pdev->dev);
priv = netdev_priv(dev);
/*
@ -683,8 +694,8 @@ static int __init am79c961_init(void)
* The PNP initialisation should have been
* done by the ether bootp loader.
*/
dev->base_addr = 0x220;
dev->irq = IRQ_EBSA110_ETHERNET;
dev->base_addr = res->start;
dev->irq = platform_get_irq(pdev, 0);
ret = -ENODEV;
if (!request_region(dev->base_addr, 0x18, dev->name))
@ -705,11 +716,11 @@ static int __init am79c961_init(void)
inb(dev->base_addr + 4) != 0x2b)
goto release;
am79c961_banner();
for (i = 0; i < 6; i++)
dev->dev_addr[i] = inb(dev->base_addr + i * 2) & 0xff;
am79c961_banner();
spin_lock_init(&priv->chip_lock);
init_timer(&priv->timer);
priv->timer.data = (unsigned long)dev;
@ -732,6 +743,7 @@ static int __init am79c961_init(void)
if (ret == 0) {
printk(KERN_INFO "%s: ether address ", dev->name);
/* Retrive and print the ethernet address. */
for (i = 0; i < 6; i++)
printk (i == 5 ? "%02x\n" : "%02x:", dev->dev_addr[i]);
@ -746,4 +758,15 @@ static int __init am79c961_init(void)
return ret;
}
static struct device_driver am79c961_driver = {
.name = "am79c961",
.bus = &platform_bus_type,
.probe = am79c961_probe,
};
static int __init am79c961_init(void)
{
return driver_register(&am79c961_driver);
}
__initcall(am79c961_init);

View file

@ -143,6 +143,4 @@ struct dev_priv {
struct timer_list timer;
};
extern int am79c961_probe (struct net_device *dev);
#endif

View file

@ -21,8 +21,20 @@
#ifndef __ENP2611_H
#define __ENP2611_H
#define ENP2611_GPIO_SCL 0x07
#define ENP2611_GPIO_SDA 0x06
#define ENP2611_CALEB_PHYS_BASE 0xc5000000
#define ENP2611_CALEB_VIRT_BASE 0xfe000000
#define ENP2611_CALEB_SIZE 0x00100000
#define ENP2611_PM3386_0_PHYS_BASE 0xc6000000
#define ENP2611_PM3386_0_VIRT_BASE 0xfe100000
#define ENP2611_PM3386_0_SIZE 0x00100000
#define ENP2611_PM3386_1_PHYS_BASE 0xc6400000
#define ENP2611_PM3386_1_VIRT_BASE 0xfe200000
#define ENP2611_PM3386_1_SIZE 0x00100000
#define ENP2611_GPIO_SCL 7
#define ENP2611_GPIO_SDA 6
#endif

View file

@ -59,14 +59,15 @@
#define IXP2000_CAP_SIZE 0x00100000
/*
* Addresses for specific on-chip peripherals
* Addresses for specific on-chip peripherals.
*/
#define IXP2000_SLOWPORT_CSR_VIRT_BASE 0xfef80000
#define IXP2000_GLOBAL_REG_VIRT_BASE 0xfef04000
#define IXP2000_UART_PHYS_BASE 0xc0030000
#define IXP2000_UART_VIRT_BASE 0xfef30000
#define IXP2000_TIMER_VIRT_BASE 0xfef20000
#define IXP2000_GPIO_VIRT_BASE 0Xfef10000
#define IXP2000_UENGINE_CSR_VIRT_BASE 0xfef18000
#define IXP2000_GPIO_VIRT_BASE 0xfef10000
/*
* Devices outside of the 0xc0000000 -> 0xc0100000 range. The virtual
@ -252,7 +253,7 @@
#define IXP2000_PCI_XSCALE_INT_ENABLE IXP2000_PCI_CSR(0x15C)
#define IXP2000_PCICNTL_PNR (1<<17) /* PCI not Reset bit of PCI_CONTROL */
#define IXP2000_PCICNTL_PCF (1<<28) /* PCI Centrolfunction bit */
#define IXP2000_PCICNTL_PCF (1<<28) /* PCI Central function bit */
#define IXP2000_XSCALE_INT (1<<1) /* Interrupt from XScale to PCI */
/* These are from the IRQ register in the PCI ISR register */

View file

@ -26,29 +26,24 @@ static inline void arch_reset(char mode)
* RedBoot bank.
*/
if (machine_is_ixdp2401()) {
*IXDP2X01_CPLD_FLASH_REG = ((0 >> IXDP2X01_FLASH_WINDOW_BITS)
| IXDP2X01_CPLD_FLASH_INTERN);
*IXDP2X01_CPLD_RESET_REG = 0xffffffff;
ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
((0 >> IXDP2X01_FLASH_WINDOW_BITS)
| IXDP2X01_CPLD_FLASH_INTERN));
ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
}
/*
* On IXDP2801 we need to write this magic sequence to the CPLD
* to cause a complete reset of the CPU and all external devices
* and moves the flash bank register back to 0.
* and move the flash bank register back to 0.
*/
if (machine_is_ixdp2801()) {
unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
*IXDP2X01_CPLD_RESET_REG = reset_reg;
mb();
*IXDP2X01_CPLD_RESET_REG = 0x80000000;
ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
}
/*
* We do a reset all if we are PCI master. We could be a slave and we
* don't want to do anything funky on the PCI bus.
*/
if (*IXP2000_STRAP_OPTIONS & CFG_PCI_BOOT_HOST) {
*(IXP2000_RESET0) |= (RSTALL);
}
ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
}

View file

@ -0,0 +1,62 @@
/*
* Generic library functions for the microengines found on the Intel
* IXP2000 series of network processors.
*
* Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
* Dedicated to Marija Kulikova.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as
* published by the Free Software Foundation; either version 2.1 of the
* License, or (at your option) any later version.
*/
#ifndef __IXP2000_UENGINE_H
#define __IXP2000_UENGINE_H
extern u32 ixp2000_uengine_mask;
struct ixp2000_uengine_code
{
u32 cpu_model_bitmask;
u8 cpu_min_revision;
u8 cpu_max_revision;
u32 uengine_parameters;
struct ixp2000_reg_value {
int reg;
u32 value;
} *initial_reg_values;
int num_insns;
u8 *insns;
};
u32 ixp2000_uengine_csr_read(int uengine, int offset);
void ixp2000_uengine_csr_write(int uengine, int offset, u32 value);
void ixp2000_uengine_reset(u32 uengine_mask);
void ixp2000_uengine_set_mode(int uengine, u32 mode);
void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns);
void ixp2000_uengine_init_context(int uengine, int context, int pc);
void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask);
void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask);
int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c);
#define IXP2000_UENGINE_8_CONTEXTS 0x00000000
#define IXP2000_UENGINE_4_CONTEXTS 0x80000000
#define IXP2000_UENGINE_PRN_UPDATE_EVERY 0x40000000
#define IXP2000_UENGINE_PRN_UPDATE_ON_ACCESS 0x00000000
#define IXP2000_UENGINE_NN_FROM_SELF 0x00100000
#define IXP2000_UENGINE_NN_FROM_PREVIOUS 0x00000000
#define IXP2000_UENGINE_ASSERT_EMPTY_AT_3 0x000c0000
#define IXP2000_UENGINE_ASSERT_EMPTY_AT_2 0x00080000
#define IXP2000_UENGINE_ASSERT_EMPTY_AT_1 0x00040000
#define IXP2000_UENGINE_ASSERT_EMPTY_AT_0 0x00000000
#define IXP2000_UENGINE_LM_ADDR1_GLOBAL 0x00020000
#define IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT 0x00000000
#define IXP2000_UENGINE_LM_ADDR0_GLOBAL 0x00010000
#define IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT 0x00000000
#endif

View file

@ -0,0 +1,38 @@
/* linux/include/asm-arm/arch-realview/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <asm/hardware/amba_serial.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x10000000
movne \rx, #0xf1000000 @ virtual base
orr \rx, \rx, #0x00009000
.endm
.macro senduart,rd,rx
strb \rd, [\rx, #UART01x_DR]
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
bne 1001b
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
bne 1001b
.endm

View file

@ -0,0 +1,27 @@
/*
* linux/include/asm-arm/arch-realview/dma.h
*
* Copyright (C) 2003 ARM Limited.
* Copyright (C) 1997,1998 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
#define MAX_DMA_ADDRESS 0xffffffff
#define MAX_DMA_CHANNELS 0
#endif /* _ASM_ARCH_DMA_H */

View file

@ -0,0 +1,49 @@
/*
* include/asm-arm/arch-realview/entry-macro.S
*
* Low-level IRQ helper macros for RealView platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <asm/hardware/gic.h>
.macro disable_fiq
.endm
/*
* The interrupt numbering scheme is defined in the
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
* 16-28 are reserved
* 29-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
* For now, we ignore all local interrupts so only return an interrupt if it's
* between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
*
* A simple read from the controller will tell us the number of the highest
* priority enabled interrupt. We then just need to check whether it is in the
* valid range for an IRQ (30-1020 inclusive).
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =IO_ADDRESS(REALVIEW_GIC_CPU_BASE)
ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #29
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
.endm

View file

@ -0,0 +1,31 @@
/*
* linux/include/asm-arm/arch-realview/hardware.h
*
* This file contains the hardware definitions of the RealView boards.
*
* Copyright (C) 2003 ARM Limited.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <asm/sizes.h>
#include <asm/arch/platform.h>
/* macro to get at IO space when running virtually */
#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
#endif

View file

@ -0,0 +1,34 @@
/*
* linux/include/asm-arm/arch-realview/io.h
*
* Copyright (C) 2003 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#define IO_SPACE_LIMIT 0xffffffff
static inline void __iomem *__io(unsigned long addr)
{
return (void __iomem *)addr;
}
#define __io(a) __io(a)
#define __mem_pci(a) (a)
#define __mem_isa(a) (a)
#endif

View file

@ -0,0 +1,103 @@
/*
* linux/include/asm-arm/arch-realview/irqs.h
*
* Copyright (C) 2003 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <asm/arch/platform.h>
/*
* IRQ interrupts definitions are the same the INT definitions
* held within platform.h
*/
#define IRQ_GIC_START 32
#define IRQ_WDOGINT (IRQ_GIC_START + INT_WDOGINT)
#define IRQ_SOFTINT (IRQ_GIC_START + INT_SOFTINT)
#define IRQ_COMMRx (IRQ_GIC_START + INT_COMMRx)
#define IRQ_COMMTx (IRQ_GIC_START + INT_COMMTx)
#define IRQ_TIMERINT0_1 (IRQ_GIC_START + INT_TIMERINT0_1)
#define IRQ_TIMERINT2_3 (IRQ_GIC_START + INT_TIMERINT2_3)
#define IRQ_GPIOINT0 (IRQ_GIC_START + INT_GPIOINT0)
#define IRQ_GPIOINT1 (IRQ_GIC_START + INT_GPIOINT1)
#define IRQ_GPIOINT2 (IRQ_GIC_START + INT_GPIOINT2)
#define IRQ_GPIOINT3 (IRQ_GIC_START + INT_GPIOINT3)
#define IRQ_RTCINT (IRQ_GIC_START + INT_RTCINT)
#define IRQ_SSPINT (IRQ_GIC_START + INT_SSPINT)
#define IRQ_UARTINT0 (IRQ_GIC_START + INT_UARTINT0)
#define IRQ_UARTINT1 (IRQ_GIC_START + INT_UARTINT1)
#define IRQ_UARTINT2 (IRQ_GIC_START + INT_UARTINT2)
#define IRQ_UART3 (IRQ_GIC_START + INT_UARTINT3)
#define IRQ_SCIINT (IRQ_GIC_START + INT_SCIINT)
#define IRQ_CLCDINT (IRQ_GIC_START + INT_CLCDINT)
#define IRQ_DMAINT (IRQ_GIC_START + INT_DMAINT)
#define IRQ_PWRFAILINT (IRQ_GIC_START + INT_PWRFAILINT)
#define IRQ_MBXINT (IRQ_GIC_START + INT_MBXINT)
#define IRQ_GNDINT (IRQ_GIC_START + INT_GNDINT)
#define IRQ_MMCI0B (IRQ_GIC_START + INT_MMCI0B)
#define IRQ_MMCI1B (IRQ_GIC_START + INT_MMCI1B)
#define IRQ_KMI0 (IRQ_GIC_START + INT_KMI0)
#define IRQ_KMI1 (IRQ_GIC_START + INT_KMI1)
#define IRQ_SCI3 (IRQ_GIC_START + INT_SCI3)
#define IRQ_CLCD (IRQ_GIC_START + INT_CLCD)
#define IRQ_TOUCH (IRQ_GIC_START + INT_TOUCH)
#define IRQ_KEYPAD (IRQ_GIC_START + INT_KEYPAD)
#define IRQ_DoC (IRQ_GIC_START + INT_DoC)
#define IRQ_MMCI0A (IRQ_GIC_START + INT_MMCI0A)
#define IRQ_MMCI1A (IRQ_GIC_START + INT_MMCI1A)
#define IRQ_AACI (IRQ_GIC_START + INT_AACI)
#define IRQ_ETH (IRQ_GIC_START + INT_ETH)
#define IRQ_USB (IRQ_GIC_START + INT_USB)
#define IRQMASK_WDOGINT INTMASK_WDOGINT
#define IRQMASK_SOFTINT INTMASK_SOFTINT
#define IRQMASK_COMMRx INTMASK_COMMRx
#define IRQMASK_COMMTx INTMASK_COMMTx
#define IRQMASK_TIMERINT0_1 INTMASK_TIMERINT0_1
#define IRQMASK_TIMERINT2_3 INTMASK_TIMERINT2_3
#define IRQMASK_GPIOINT0 INTMASK_GPIOINT0
#define IRQMASK_GPIOINT1 INTMASK_GPIOINT1
#define IRQMASK_GPIOINT2 INTMASK_GPIOINT2
#define IRQMASK_GPIOINT3 INTMASK_GPIOINT3
#define IRQMASK_RTCINT INTMASK_RTCINT
#define IRQMASK_SSPINT INTMASK_SSPINT
#define IRQMASK_UARTINT0 INTMASK_UARTINT0
#define IRQMASK_UARTINT1 INTMASK_UARTINT1
#define IRQMASK_UARTINT2 INTMASK_UARTINT2
#define IRQMASK_SCIINT INTMASK_SCIINT
#define IRQMASK_CLCDINT INTMASK_CLCDINT
#define IRQMASK_DMAINT INTMASK_DMAINT
#define IRQMASK_PWRFAILINT INTMASK_PWRFAILINT
#define IRQMASK_MBXINT INTMASK_MBXINT
#define IRQMASK_GNDINT INTMASK_GNDINT
#define IRQMASK_MMCI0B INTMASK_MMCI0B
#define IRQMASK_MMCI1B INTMASK_MMCI1B
#define IRQMASK_KMI0 INTMASK_KMI0
#define IRQMASK_KMI1 INTMASK_KMI1
#define IRQMASK_SCI3 INTMASK_SCI3
#define IRQMASK_UART3 INTMASK_UART3
#define IRQMASK_CLCD INTMASK_CLCD
#define IRQMASK_TOUCH INTMASK_TOUCH
#define IRQMASK_KEYPAD INTMASK_KEYPAD
#define IRQMASK_DoC INTMASK_DoC
#define IRQMASK_MMCI0A INTMASK_MMCI0A
#define IRQMASK_MMCI1A INTMASK_MMCI1A
#define IRQMASK_AACI INTMASK_AACI
#define IRQMASK_ETH INTMASK_ETH
#define IRQMASK_USB INTMASK_USB
#define NR_IRQS (IRQ_GIC_START + 64)

View file

@ -0,0 +1,38 @@
/*
* linux/include/asm-arm/arch-realview/memory.h
*
* Copyright (C) 2003 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET (0x00000000UL)
/*
* Virtual view <-> DMA view memory address translations
* virt_to_bus: Used to translate the virtual address to an
* address suitable to be passed to set_dma_addr
* bus_to_virt: Used to convert an address for DMA operations
* to an address that the kernel can use.
*/
#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
#endif

View file

@ -0,0 +1,19 @@
/*
* linux/include/asm-arm/arch-realview/param.h
*
* Copyright (C) 2002 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/

View file

@ -0,0 +1,395 @@
/*
* linux/include/asm-arm/arch-realview/platform.h
*
* Copyright (c) ARM Limited 2003. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __address_h
#define __address_h 1
/*
* Memory definitions
*/
#define REALVIEW_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/
#define REALVIEW_BOOT_ROM_HI 0x30000000
#define REALVIEW_BOOT_ROM_BASE REALVIEW_BOOT_ROM_HI /* Normal position */
#define REALVIEW_BOOT_ROM_SIZE SZ_64M
#define REALVIEW_SSRAM_BASE /* REALVIEW_SSMC_BASE ? */
#define REALVIEW_SSRAM_SIZE SZ_2M
#define REALVIEW_FLASH_BASE 0x40000000
#define REALVIEW_FLASH_SIZE SZ_64M
/*
* SDRAM
*/
#define REALVIEW_SDRAM_BASE 0x00000000
/*
* Logic expansion modules
*
*/
/* ------------------------------------------------------------------------
* RealView Registers
* ------------------------------------------------------------------------
*
*/
#define REALVIEW_SYS_ID_OFFSET 0x00
#define REALVIEW_SYS_SW_OFFSET 0x04
#define REALVIEW_SYS_LED_OFFSET 0x08
#define REALVIEW_SYS_OSC0_OFFSET 0x0C
#define REALVIEW_SYS_OSC1_OFFSET 0x10
#define REALVIEW_SYS_OSC2_OFFSET 0x14
#define REALVIEW_SYS_OSC3_OFFSET 0x18
#define REALVIEW_SYS_OSC4_OFFSET 0x1C /* OSC1 for RealView/AB */
#define REALVIEW_SYS_LOCK_OFFSET 0x20
#define REALVIEW_SYS_100HZ_OFFSET 0x24
#define REALVIEW_SYS_CFGDATA1_OFFSET 0x28
#define REALVIEW_SYS_CFGDATA2_OFFSET 0x2C
#define REALVIEW_SYS_FLAGS_OFFSET 0x30
#define REALVIEW_SYS_FLAGSSET_OFFSET 0x30
#define REALVIEW_SYS_FLAGSCLR_OFFSET 0x34
#define REALVIEW_SYS_NVFLAGS_OFFSET 0x38
#define REALVIEW_SYS_NVFLAGSSET_OFFSET 0x38
#define REALVIEW_SYS_NVFLAGSCLR_OFFSET 0x3C
#define REALVIEW_SYS_RESETCTL_OFFSET 0x40
#define REALVIEW_SYS_PCICTL_OFFSET 0x44
#define REALVIEW_SYS_MCI_OFFSET 0x48
#define REALVIEW_SYS_FLASH_OFFSET 0x4C
#define REALVIEW_SYS_CLCD_OFFSET 0x50
#define REALVIEW_SYS_CLCDSER_OFFSET 0x54
#define REALVIEW_SYS_BOOTCS_OFFSET 0x58
#define REALVIEW_SYS_24MHz_OFFSET 0x5C
#define REALVIEW_SYS_MISC_OFFSET 0x60
#define REALVIEW_SYS_IOSEL_OFFSET 0x70
#define REALVIEW_SYS_TEST_OSC0_OFFSET 0x80
#define REALVIEW_SYS_TEST_OSC1_OFFSET 0x84
#define REALVIEW_SYS_TEST_OSC2_OFFSET 0x88
#define REALVIEW_SYS_TEST_OSC3_OFFSET 0x8C
#define REALVIEW_SYS_TEST_OSC4_OFFSET 0x90
#define REALVIEW_SYS_BASE 0x10000000
#define REALVIEW_SYS_ID (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
#define REALVIEW_SYS_SW (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
#define REALVIEW_SYS_LED (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
#define REALVIEW_SYS_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
#define REALVIEW_SYS_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
#define REALVIEW_SYS_LOCK (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
#define REALVIEW_SYS_100HZ (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
#define REALVIEW_SYS_CFGDATA1 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
#define REALVIEW_SYS_CFGDATA2 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
#define REALVIEW_SYS_FLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
#define REALVIEW_SYS_FLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
#define REALVIEW_SYS_FLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
#define REALVIEW_SYS_NVFLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
#define REALVIEW_SYS_NVFLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
#define REALVIEW_SYS_NVFLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
#define REALVIEW_SYS_RESETCTL (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
#define REALVIEW_SYS_PCICTL (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
#define REALVIEW_SYS_MCI (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
#define REALVIEW_SYS_FLASH (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
#define REALVIEW_SYS_CLCD (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
#define REALVIEW_SYS_CLCDSER (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
#define REALVIEW_SYS_BOOTCS (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
#define REALVIEW_SYS_24MHz (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
#define REALVIEW_SYS_MISC (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
#define REALVIEW_SYS_IOSEL (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
#define REALVIEW_SYS_TEST_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
#define REALVIEW_SYS_TEST_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
#define REALVIEW_SYS_TEST_OSC2 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
#define REALVIEW_SYS_TEST_OSC3 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
#define REALVIEW_SYS_TEST_OSC4 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
/*
* Values for REALVIEW_SYS_RESET_CTRL
*/
#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR 0x01
#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT 0x02
#define REALVIEW_SYS_CTRL_RESET_DLLRESET 0x03
#define REALVIEW_SYS_CTRL_RESET_PLLRESET 0x04
#define REALVIEW_SYS_CTRL_RESET_POR 0x05
#define REALVIEW_SYS_CTRL_RESET_DoC 0x06
#define REALVIEW_SYS_CTRL_LED (1 << 0)
/* ------------------------------------------------------------------------
* RealView control registers
* ------------------------------------------------------------------------
*/
/*
* REALVIEW_IDFIELD
*
* 31:24 = manufacturer (0x41 = ARM)
* 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
* 15:12 = FPGA (0x3 = XVC600 or XVC600E)
* 11:4 = build value
* 3:0 = revision number (0x1 = rev B (AHB))
*/
/*
* REALVIEW_SYS_LOCK
* control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL,
* SYS_CLD, SYS_BOOTCS
*/
#define REALVIEW_SYS_LOCK_LOCKED (1 << 16)
#define REALVIEW_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */
/*
* REALVIEW_SYS_FLASH
*/
#define REALVIEW_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */
/*
* REALVIEW_INTREG
* - used to acknowledge and control MMCI and UART interrupts
*/
#define REALVIEW_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */
#define REALVIEW_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */
#define REALVIEW_INTREG_CARDIN 0x08 /* MMCI card in detect */
/* write 1 to acknowledge and clear */
#define REALVIEW_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */
#define REALVIEW_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */
/*
* REALVIEW peripheral addresses
*/
#define REALVIEW_SCTL_BASE 0x10001000 /* System controller */
#define REALVIEW_I2C_BASE 0x10002000 /* I2C control */
/* Reserved 0x10003000 */
#define REALVIEW_AACI_BASE 0x10004000 /* Audio */
#define REALVIEW_MMCI0_BASE 0x10005000 /* MMC interface */
#define REALVIEW_KMI0_BASE 0x10006000 /* KMI interface */
#define REALVIEW_KMI1_BASE 0x10007000 /* KMI 2nd interface */
#define REALVIEW_CHAR_LCD_BASE 0x10008000 /* Character LCD */
#define REALVIEW_UART0_BASE 0x10009000 /* UART 0 */
#define REALVIEW_UART1_BASE 0x1000A000 /* UART 1 */
#define REALVIEW_UART2_BASE 0x1000B000 /* UART 2 */
#define REALVIEW_UART3_BASE 0x1000C000 /* UART 3 */
#define REALVIEW_SSP_BASE 0x1000D000 /* Synchronous Serial Port */
#define REALVIEW_SCI_BASE 0x1000E000 /* Smart card controller */
/* Reserved 0x1000F000 */
#define REALVIEW_WATCHDOG_BASE 0x10010000 /* watchdog interface */
#define REALVIEW_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */
#define REALVIEW_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */
#define REALVIEW_GPIO0_BASE 0x10013000 /* GPIO port 0 */
#define REALVIEW_GPIO1_BASE 0x10014000 /* GPIO port 1 */
#define REALVIEW_GPIO2_BASE 0x10015000 /* GPIO port 2 */
/* Reserved 0x10016000 */
#define REALVIEW_RTC_BASE 0x10017000 /* Real Time Clock */
#define REALVIEW_DMC_BASE 0x10018000 /* DMC configuration */
#define REALVIEW_PCI_CORE_BASE 0x10019000 /* PCI configuration */
/* Reserved 0x1001A000 - 0x1001FFFF */
#define REALVIEW_CLCD_BASE 0x10020000 /* CLCD */
#define REALVIEW_DMAC_BASE 0x10030000 /* DMA controller */
#define REALVIEW_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */
#define REALVIEW_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */
#define REALVIEW_SMC_BASE 0x10080000 /* SMC */
/* Reserved 0x10090000 - 0x100EFFFF */
#define REALVIEW_ETH_BASE 0x4E000000 /* Ethernet */
/* PCI space */
#define REALVIEW_PCI_BASE 0x41000000 /* PCI Interface */
#define REALVIEW_PCI_CFG_BASE 0x42000000
#define REALVIEW_PCI_MEM_BASE0 0x44000000
#define REALVIEW_PCI_MEM_BASE1 0x50000000
#define REALVIEW_PCI_MEM_BASE2 0x60000000
/* Sizes of above maps */
#define REALVIEW_PCI_BASE_SIZE 0x01000000
#define REALVIEW_PCI_CFG_BASE_SIZE 0x02000000
#define REALVIEW_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */
#define REALVIEW_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */
#define REALVIEW_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */
#define REALVIEW_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */
#define REALVIEW_LT_BASE 0x80000000 /* Logic Tile expansion */
/*
* Disk on Chip
*/
#define REALVIEW_DOC_BASE 0x2C000000
#define REALVIEW_DOC_SIZE (16 << 20)
#define REALVIEW_DOC_PAGE_SIZE 512
#define REALVIEW_DOC_TOTAL_PAGES (DOC_SIZE / PAGE_SIZE)
#define ERASE_UNIT_PAGES 32
#define START_PAGE 0x80
/*
* LED settings, bits [7:0]
*/
#define REALVIEW_SYS_LED0 (1 << 0)
#define REALVIEW_SYS_LED1 (1 << 1)
#define REALVIEW_SYS_LED2 (1 << 2)
#define REALVIEW_SYS_LED3 (1 << 3)
#define REALVIEW_SYS_LED4 (1 << 4)
#define REALVIEW_SYS_LED5 (1 << 5)
#define REALVIEW_SYS_LED6 (1 << 6)
#define REALVIEW_SYS_LED7 (1 << 7)
#define ALL_LEDS 0xFF
#define LED_BANK REALVIEW_SYS_LED
/*
* Control registers
*/
#define REALVIEW_IDFIELD_OFFSET 0x0 /* RealView build information */
#define REALVIEW_FLASHPROG_OFFSET 0x4 /* Flash devices */
#define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */
#define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */
/* ------------------------------------------------------------------------
* Interrupts - bit assignment (primary)
* ------------------------------------------------------------------------
*/
#define INT_WDOGINT 0 /* Watchdog timer */
#define INT_SOFTINT 1 /* Software interrupt */
#define INT_COMMRx 2 /* Debug Comm Rx interrupt */
#define INT_COMMTx 3 /* Debug Comm Tx interrupt */
#define INT_TIMERINT0_1 4 /* Timer 0 and 1 */
#define INT_TIMERINT2_3 5 /* Timer 2 and 3 */
#define INT_GPIOINT0 6 /* GPIO 0 */
#define INT_GPIOINT1 7 /* GPIO 1 */
#define INT_GPIOINT2 8 /* GPIO 2 */
/* 9 reserved */
#define INT_RTCINT 10 /* Real Time Clock */
#define INT_SSPINT 11 /* Synchronous Serial Port */
#define INT_UARTINT0 12 /* UART 0 on development chip */
#define INT_UARTINT1 13 /* UART 1 on development chip */
#define INT_UARTINT2 14 /* UART 2 on development chip */
#define INT_UARTINT3 15 /* UART 3 on development chip */
#define INT_SCIINT 16 /* Smart Card Interface */
#define INT_MMCI0A 17 /* Multimedia Card 0A */
#define INT_MMCI0B 18 /* Multimedia Card 0B */
#define INT_AACI 19 /* Audio Codec */
#define INT_KMI0 20 /* Keyboard/Mouse port 0 */
#define INT_KMI1 21 /* Keyboard/Mouse port 1 */
#define INT_CHARLCD 22 /* Character LCD */
#define INT_CLCDINT 23 /* CLCD controller */
#define INT_DMAINT 24 /* DMA controller */
#define INT_PWRFAILINT 25 /* Power failure */
#define INT_PISMO 26
#define INT_DoC 27 /* Disk on Chip memory controller */
#define INT_ETH 28 /* Ethernet controller */
#define INT_USB 29 /* USB controller */
#define INT_TSPENINT 30 /* Touchscreen pen */
#define INT_TSKPADINT 31 /* Touchscreen keypad */
/*
* Interrupt bit positions
*
*/
#define INTMASK_WDOGINT (1 << INT_WDOGINT)
#define INTMASK_SOFTINT (1 << INT_SOFTINT)
#define INTMASK_COMMRx (1 << INT_COMMRx)
#define INTMASK_COMMTx (1 << INT_COMMTx)
#define INTMASK_TIMERINT0_1 (1 << INT_TIMERINT0_1)
#define INTMASK_TIMERINT2_3 (1 << INT_TIMERINT2_3)
#define INTMASK_GPIOINT0 (1 << INT_GPIOINT0)
#define INTMASK_GPIOINT1 (1 << INT_GPIOINT1)
#define INTMASK_GPIOINT2 (1 << INT_GPIOINT2)
#define INTMASK_RTCINT (1 << INT_RTCINT)
#define INTMASK_SSPINT (1 << INT_SSPINT)
#define INTMASK_UARTINT0 (1 << INT_UARTINT0)
#define INTMASK_UARTINT1 (1 << INT_UARTINT1)
#define INTMASK_UARTINT2 (1 << INT_UARTINT2)
#define INTMASK_UARTINT3 (1 << INT_UARTINT3)
#define INTMASK_SCIINT (1 << INT_SCIINT)
#define INTMASK_MMCI0A (1 << INT_MMCI0A)
#define INTMASK_MMCI0B (1 << INT_MMCI0B)
#define INTMASK_AACI (1 << INT_AACI)
#define INTMASK_KMI0 (1 << INT_KMI0)
#define INTMASK_KMI1 (1 << INT_KMI1)
#define INTMASK_CHARLCD (1 << INT_CHARLCD)
#define INTMASK_CLCDINT (1 << INT_CLCDINT)
#define INTMASK_DMAINT (1 << INT_DMAINT)
#define INTMASK_PWRFAILINT (1 << INT_PWRFAILINT)
#define INTMASK_PISMO (1 << INT_PISMO)
#define INTMASK_DoC (1 << INT_DoC)
#define INTMASK_ETH (1 << INT_ETH)
#define INTMASK_USB (1 << INT_USB)
#define INTMASK_TSPENINT (1 << INT_TSPENINT)
#define INTMASK_TSKPADINT (1 << INT_TSKPADINT)
#define MAXIRQNUM 31
#define MAXFIQNUM 31
#define MAXSWINUM 31
/*
* Application Flash
*
*/
#define FLASH_BASE REALVIEW_FLASH_BASE
#define FLASH_SIZE REALVIEW_FLASH_SIZE
#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1)
#define FLASH_BLOCK_SIZE SZ_128K
/*
* Boot Flash
*
*/
#define EPROM_BASE REALVIEW_BOOT_ROM_HI
#define EPROM_SIZE REALVIEW_BOOT_ROM_SIZE
#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1)
/*
* Clean base - dummy
*
*/
#define CLEAN_BASE EPROM_BASE
/*
* System controller bit assignment
*/
#define REALVIEW_REFCLK 0
#define REALVIEW_TIMCLK 1
#define REALVIEW_TIMER1_EnSel 15
#define REALVIEW_TIMER2_EnSel 17
#define REALVIEW_TIMER3_EnSel 19
#define REALVIEW_TIMER4_EnSel 21
#define MAX_TIMER 2
#define MAX_PERIOD 699050
#define TICKS_PER_uSEC 1
/*
* These are useconds NOT ticks.
*
*/
#define mSEC_1 1000
#define mSEC_5 (mSEC_1 * 5)
#define mSEC_10 (mSEC_1 * 10)
#define mSEC_25 (mSEC_1 * 25)
#define SEC_1 (mSEC_1 * 1000)
#define REALVIEW_CSR_BASE 0x10000000
#define REALVIEW_CSR_SIZE 0x10000000
#endif
/* END */

View file

@ -0,0 +1,51 @@
/*
* linux/include/asm-arm/arch-realview/system.h
*
* Copyright (C) 2003 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/arch/platform.h>
static inline void arch_idle(void)
{
/*
* This should do all the clock switching
* and wait for interrupt tricks
*/
cpu_do_idle();
}
static inline void arch_reset(char mode)
{
unsigned int hdr_ctrl = (IO_ADDRESS(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET);
unsigned int val;
/*
* To reset, we hit the on-board reset register
* in the system FPGA
*/
val = __raw_readl(hdr_ctrl);
val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
__raw_writel(val, hdr_ctrl);
}
#endif

View file

@ -0,0 +1,23 @@
/*
* linux/include/asm-arm/arch-realview/timex.h
*
* RealView architecture timex specifications
*
* Copyright (C) 2003 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define CLOCK_TICK_RATE (50000000 / 16)

View file

@ -0,0 +1,54 @@
/*
* linux/include/asm-arm/arch-realview/uncompress.h
*
* Copyright (C) 2003 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <asm/hardware.h>
#define AMBA_UART_DR (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x00))
#define AMBA_UART_LCRH (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x2c))
#define AMBA_UART_CR (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x30))
#define AMBA_UART_FR (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x18))
/*
* This does not append a newline
*/
static void putstr(const char *s)
{
while (*s) {
while (AMBA_UART_FR & (1 << 5))
barrier();
AMBA_UART_DR = *s;
if (*s == '\n') {
while (AMBA_UART_FR & (1 << 5))
barrier();
AMBA_UART_DR = '\r';
}
s++;
}
while (AMBA_UART_FR & (1 << 3))
barrier();
}
/*
* nothing to do
*/
#define arch_decomp_setup()
#define arch_decomp_wdog()

View file

@ -0,0 +1,21 @@
/*
* linux/include/asm-arm/arch-realview/vmalloc.h
*
* Copyright (C) 2003 ARM Limited
* Copyright (C) 2000 Russell King.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define VMALLOC_END (PAGE_OFFSET + 0x18000000)

View file

@ -55,6 +55,7 @@
#define S3C2410_IISMOD_16FS (0<<0)
#define S3C2410_IISMOD_32FS (1<<0)
#define S3C2410_IISMOD_48FS (2<<0)
#define S3C2410_IISMOD_FS_MASK (3<<0)
#define S3C2410_IISPSR (0x08)
#define S3C2410_IISPSR_INTMASK (31<<5)

View file

@ -22,7 +22,7 @@
#define CLCD_UBAS 0x00000010
#define CLCD_LBAS 0x00000014
#ifndef CONFIG_ARCH_VERSATILE
#if !defined(CONFIG_ARCH_VERSATILE) && !defined(CONFIG_ARCH_REALVIEW)
#define CLCD_IENB 0x00000018
#define CLCD_CNTL 0x0000001c
#else