ARM: SAMSUNG: Move pm-check.c to plat-samsung

Move the pm-check.c file to plat-samsung for all Samsung SoC users, and
update Kconfig names to make them SAMSUNG_ instead of S3C2410_

Sed expresions used to make the change:

    s/S3C2410_PM_DEBUG/SAMSUNG_PM_DEBUG/g
    s/S3C2410_PM_CHECK/SAMSUNG_PM_CHECK/g

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This commit is contained in:
Ben Dooks 2010-01-20 12:29:25 +09:00
parent 106cc6aa73
commit 8005745d6e
9 changed files with 59 additions and 58 deletions

View file

@ -199,8 +199,8 @@ CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
#
# Power management
#
# CONFIG_S3C2410_PM_DEBUG is not set
# CONFIG_S3C2410_PM_CHECK is not set
# CONFIG_SAMSUNG_PM_DEBUG is not set
# CONFIG_SAMSUNG_PM_CHECK is not set
CONFIG_S3C_LOWLEVEL_UART_PORT=0
CONFIG_S3C_GPIO_SPACE=0

View file

@ -203,8 +203,8 @@ CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
#
# Power management
#
# CONFIG_S3C2410_PM_DEBUG is not set
# CONFIG_S3C2410_PM_CHECK is not set
# CONFIG_SAMSUNG_PM_DEBUG is not set
# CONFIG_SAMSUNG_PM_CHECK is not set
CONFIG_S3C_LOWLEVEL_UART_PORT=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_DEV_HSMMC=y

View file

@ -59,50 +59,6 @@ config S3C_BOOT_UART_FORCE_FIFO
Say Y here to force the UART FIFOs on during the kernel
uncompressor
comment "Power management"
config S3C2410_PM_DEBUG
bool "S3C2410 PM Suspend debug"
depends on PM
help
Say Y here if you want verbose debugging from the PM Suspend and
Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
for more information.
config S3C_PM_DEBUG_LED_SMDK
bool "SMDK LED suspend/resume debugging"
depends on PM && (MACH_SMDK6410)
help
Say Y here to enable the use of the SMDK LEDs on the baseboard
for debugging of the state of the suspend and resume process.
Note, this currently only works for S3C64XX based SMDK boards.
config S3C2410_PM_CHECK
bool "S3C2410 PM Suspend Memory CRC"
depends on PM && CRC32
help
Enable the PM code's memory area checksum over sleep. This option
will generate CRCs of all blocks of memory, and store them before
going to sleep. The blocks are then checked on resume for any
errors.
Note, this can take several seconds depending on memory size
and CPU speed.
See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
config S3C2410_PM_CHECK_CHUNKSIZE
int "S3C2410 PM Suspend CRC Chunksize (KiB)"
depends on PM && S3C2410_PM_CHECK
default 64
help
Set the chunksize in Kilobytes of the CRC for checking memory
corruption over suspend and resume. A smaller value will mean that
the CRC data block will take more memory, but wil identify any
faults with better precision.
See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
config S3C_LOWLEVEL_UART_PORT
int "S3C UART to use for low-level messages"

View file

@ -21,4 +21,3 @@ obj-$(CONFIG_S3C_DMA) += dma.o
# PM support
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o

View file

@ -111,7 +111,7 @@ extern int s3c24xx_irq_resume(struct sys_device *dev);
/* PM debug functions */
#ifdef CONFIG_S3C2410_PM_DEBUG
#ifdef CONFIG_SAMSUNG_PM_DEBUG
/**
* s3c_pm_dbg() - low level debug function for use in suspend/resume.
* @msg: The message to print.
@ -141,7 +141,7 @@ static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
/* suspend memory checking */
#ifdef CONFIG_S3C2410_PM_CHECK
#ifdef CONFIG_SAMSUNG_PM_CHECK
extern void s3c_pm_check_prepare(void);
extern void s3c_pm_check_restore(void);
extern void s3c_pm_check_cleanup(void);

View file

@ -41,7 +41,7 @@ unsigned long s3c_pm_flags;
* resume before the console layer is available.
*/
#ifdef CONFIG_S3C2410_PM_DEBUG
#ifdef CONFIG_SAMSUNG_PM_DEBUG
extern void printascii(const char *);
void s3c_pm_dbg(const char *fmt, ...)
@ -65,13 +65,13 @@ static inline void s3c_pm_debug_init(void)
#else
#define s3c_pm_debug_init() do { } while(0)
#endif /* CONFIG_S3C2410_PM_DEBUG */
#endif /* CONFIG_SAMSUNG_PM_DEBUG */
/* Save the UART configurations if we are configured for debug. */
unsigned char pm_uart_udivslot;
#ifdef CONFIG_S3C2410_PM_DEBUG
#ifdef CONFIG_SAMSUNG_PM_DEBUG
struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];

View file

@ -132,4 +132,49 @@ config S3C_DEV_NAND
help
Compile in platform device definition for NAND controller
comment "Power management"
config SAMSUNG_PM_DEBUG
bool "S3C2410 PM Suspend debug"
depends on PM
help
Say Y here if you want verbose debugging from the PM Suspend and
Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
for more information.
config S3C_PM_DEBUG_LED_SMDK
bool "SMDK LED suspend/resume debugging"
depends on PM && (MACH_SMDK6410)
help
Say Y here to enable the use of the SMDK LEDs on the baseboard
for debugging of the state of the suspend and resume process.
Note, this currently only works for S3C64XX based SMDK boards.
config SAMSUNG_PM_CHECK
bool "S3C2410 PM Suspend Memory CRC"
depends on PM && CRC32
help
Enable the PM code's memory area checksum over sleep. This option
will generate CRCs of all blocks of memory, and store them before
going to sleep. The blocks are then checked on resume for any
errors.
Note, this can take several seconds depending on memory size
and CPU speed.
See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
config SAMSUNG_PM_CHECK_CHUNKSIZE
int "S3C2410 PM Suspend CRC Chunksize (KiB)"
depends on PM && SAMSUNG_PM_CHECK
default 64
help
Set the chunksize in Kilobytes of the CRC for checking memory
corruption over suspend and resume. A smaller value will mean that
the CRC data block will take more memory, but wil identify any
faults with better precision.
See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
endif

View file

@ -42,6 +42,7 @@ obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
# PM support
obj-$(CONFIG_PM) += pm-gpio.o
obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
# PWM support

View file

@ -20,8 +20,8 @@
#include <plat/pm.h>
#if CONFIG_S3C2410_PM_CHECK_CHUNKSIZE < 1
#error CONFIG_S3C2410_PM_CHECK_CHUNKSIZE must be a positive non-zero value
#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1
#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value
#endif
/* suspend checking code...
@ -29,12 +29,12 @@
* this next area does a set of crc checks over all the installed
* memory, so the system can verify if the resume was ok.
*
* CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
* CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
* increasing it will mean that the area corrupted will be less easy to spot,
* and reducing the size will cause the CRC save area to grow
*/
#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
#define CHECK_CHUNKSIZE (CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE * 1024)
static u32 crc_size; /* size needed for the crc block */
static u32 *crcs; /* allocated over suspend/resume */