mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity

arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration 

There are two issues with SDHC2 configuration for SA8155P-ADP,
which prevent use of SDHC2 and causes issues with ethernet:

- Card Detect pin for SHDC2 on SA8155P-ADP is connected to gpio4 of
  PMM8155AU_1, not to SoC itself. SoC's gpio4 is used for DWMAC
  TX. If sdhc driver probes after dwmac driver, it reconfigures
  gpio4 and this breaks Ethernet MAC.

- pinctrl configuration mentions gpio96 as CD pin. It seems it was
  copied from some SM8150 example, because as mentioned above,
  correct CD pin is gpio4 on PMM8155AU_1.

This patch fixes both mentioned issues by providing correct pin handle
and pinctrl configuration.

Fixes: 0deb2624e2 ("arm64: dts: qcom: sa8155p-adp: Add support for uSD card")
Cc: stable@vger.kernel.org
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20240412190310.1647893-1-volodymyr_babchuk@epam.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Volodymyr Babchuk 2024-04-12 19:03:25 +00:00 committed by Bjorn Andersson
parent ecda830909
commit 819fe8c96a
1 changed files with 13 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
arch/arm64/boot/dts/qcom/sa8155p-adp.dts
View File

@ -367,6 +367,16 @@
};
};
&pmm8155au_1_gpios {
pmm8155au_1_sdc2_cd: sdc2-cd-default-state {
pins = "gpio4";
function = "normal";
input-enable;
bias-pull-up;
power-source = <0>;
};
};
&qupv3_id_1 {
status = "okay";
};
@ -384,10 +394,10 @@
&sdhc_2 {
status = "okay";
cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
cd-gpios = <&pmm8155au_1_gpios 4 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc2_on>;
pinctrl-1 = <&sdc2_off>;
pinctrl-0 = <&sdc2_on &pmm8155au_1_sdc2_cd>;
pinctrl-1 = <&sdc2_off &pmm8155au_1_sdc2_cd>;
vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */
vmmc-supply = <&vreg_l17a_2p96>; /* Card power line */
bus-width = <4>;
@ -505,13 +515,6 @@
bias-pull-up; /* pull up */
drive-strength = <16>; /* 16 MA */
};
sd-cd-pins {
pins = "gpio96";
function = "gpio";
bias-pull-up; /* pull up */
drive-strength = <2>; /* 2 MA */
};
};
sdc2_off: sdc2-off-state {
@ -532,13 +535,6 @@
bias-pull-up; /* pull up */
drive-strength = <2>; /* 2 MA */
};
sd-cd-pins {
pins = "gpio96";
function = "gpio";
bias-pull-up; /* pull up */
drive-strength = <2>; /* 2 MA */
};
};
usb2phy_ac_en1_default: usb2phy-ac-en1-default-state {