ARM: keystone: Add minimal TI Keystone platform support
Texas Instruments Keystone family of multi-core devices are based on ARM Cortex A15. Patch adds basic definitions for a new Keystone sub-architecture in ARM. The TCI66xxK2H Communications Infrastructure Keystone SoCs are member of the C66x family based on TI's new KeyStone 2 multi-core SoC Architecture designed specifically for high performance wireless and networking infrastructure applications. The SOCs contains many subsystems like Cortex A15 ARM CorePacs, C66XX DSP CorePacs, MSMC memory controller, Tera Net bus, IP Network, Navigator, Hyperlink, 1G/10G Ethernet, Radio layers and queue based communication systems. Cc: Arnd Bergmann <arnd@arndb.de> Cc: arm@kernel.org Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
This commit is contained in:
Santosh Shilimkar
parent
d5e9fe8462
commit
828989ad87
|
|
@ -948,6 +948,8 @@ source "arch/arm/mach-iop13xx/Kconfig"
|
|||
|
||||
source "arch/arm/mach-ixp4xx/Kconfig"
|
||||
|
||||
source "arch/arm/mach-keystone/Kconfig"
|
||||
|
||||
source "arch/arm/mach-kirkwood/Kconfig"
|
||||
|
||||
source "arch/arm/mach-ks8695/Kconfig"
|
||||
|
|
@ -1560,6 +1562,7 @@ config ARCH_NR_GPIO
|
|||
int
|
||||
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
|
||||
default 512 if SOC_OMAP5
|
||||
default 512 if ARCH_KEYSTONE
|
||||
default 392 if ARCH_U8500
|
||||
default 352 if ARCH_VT8500
|
||||
default 288 if ARCH_SUNXI
|
||||
|
|
|
|||
|
|
@ -251,6 +251,20 @@ choice
|
|||
Say Y here if you want kernel low-level debugging support
|
||||
on i.MX6Q/DL.
|
||||
|
||||
config DEBUG_KEYSTONE_UART0
|
||||
bool "Kernel low-level debugging on KEYSTONE2 using UART0"
|
||||
depends on ARCH_KEYSTONE
|
||||
help
|
||||
Say Y here if you want the debug print routines to direct
|
||||
their output to UART0 serial port on KEYSTONE2 devices.
|
||||
|
||||
config DEBUG_KEYSTONE_UART1
|
||||
bool "Kernel low-level debugging on KEYSTONE2 using UART1"
|
||||
depends on ARCH_KEYSTONE
|
||||
help
|
||||
Say Y here if you want the debug print routines to direct
|
||||
their output to UART1 serial port on KEYSTONE2 devices.
|
||||
|
||||
config DEBUG_MMP_UART2
|
||||
bool "Kernel low-level debugging message via MMP UART2"
|
||||
depends on ARCH_MMP
|
||||
|
|
@ -632,6 +646,8 @@ config DEBUG_LL_INCLUDE
|
|||
DEBUG_IMX51_UART || \
|
||||
DEBUG_IMX53_UART ||\
|
||||
DEBUG_IMX6Q_UART
|
||||
default "debug/keystone.S" if DEBUG_KEYSTONE_UART0 || \
|
||||
DEBUG_KEYSTONE_UART1
|
||||
default "debug/mvebu.S" if DEBUG_MVEBU_UART
|
||||
default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART
|
||||
default "debug/nomadik.S" if DEBUG_NOMADIK_UART
|
||||
|
|
|
|||
|
|
@ -194,6 +194,7 @@ machine-$(CONFIG_PLAT_SPEAR) += spear
|
|||
machine-$(CONFIG_ARCH_VIRT) += virt
|
||||
machine-$(CONFIG_ARCH_ZYNQ) += zynq
|
||||
machine-$(CONFIG_ARCH_SUNXI) += sunxi
|
||||
machine-$(CONFIG_ARCH_KEYSTONE) += keystone
|
||||
|
||||
# Platform directory name. This list is sorted alphanumerically
|
||||
# by CONFIG_* macro name.
|
||||
|
|
|
|||
|
|
@ -0,0 +1,157 @@
|
|||
# CONFIG_SWAP is not set
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_SYSCTL_SYSCALL=y
|
||||
CONFIG_KALLSYMS_ALL=y
|
||||
# CONFIG_ELF_CORE is not set
|
||||
# CONFIG_BASE_FULL is not set
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_PROFILING=y
|
||||
CONFIG_OPROFILE=y
|
||||
CONFIG_KPROBES=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_FORCE_LOAD=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
CONFIG_MODULE_FORCE_UNLOAD=y
|
||||
CONFIG_MODVERSIONS=y
|
||||
CONFIG_ARCH_KEYSTONE=y
|
||||
CONFIG_ARM_LPAE=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_HIGHMEM=y
|
||||
CONFIG_VFP=y
|
||||
CONFIG_NEON=y
|
||||
# CONFIG_SUSPEND is not set
|
||||
CONFIG_PM_RUNTIME=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_UNIX_DIAG=y
|
||||
CONFIG_XFRM_USER=y
|
||||
CONFIG_XFRM_SUB_POLICY=y
|
||||
CONFIG_XFRM_STATISTICS=y
|
||||
CONFIG_NET_KEY=y
|
||||
CONFIG_NET_KEY_MIGRATE=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_ADVANCED_ROUTER=y
|
||||
CONFIG_IP_MULTIPLE_TABLES=y
|
||||
CONFIG_IP_ROUTE_MULTIPATH=y
|
||||
CONFIG_IP_ROUTE_VERBOSE=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_NET_IPIP=y
|
||||
CONFIG_NET_IPGRE_DEMUX=y
|
||||
CONFIG_NET_IPGRE=y
|
||||
CONFIG_IP_MROUTE=y
|
||||
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
|
||||
CONFIG_IP_PIMSM_V2=y
|
||||
CONFIG_INET_AH=y
|
||||
CONFIG_INET_IPCOMP=y
|
||||
CONFIG_IPV6=y
|
||||
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
|
||||
CONFIG_INET6_XFRM_MODE_TUNNEL=m
|
||||
CONFIG_INET6_XFRM_MODE_BEET=m
|
||||
CONFIG_IPV6_SIT=m
|
||||
CONFIG_IPV6_MULTIPLE_TABLES=y
|
||||
CONFIG_IPV6_SUBTREES=y
|
||||
CONFIG_IPV6_MROUTE=y
|
||||
CONFIG_IPV6_PIMSM_V2=y
|
||||
CONFIG_NETFILTER=y
|
||||
CONFIG_NF_CONNTRACK=y
|
||||
CONFIG_NF_CT_NETLINK=y
|
||||
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
|
||||
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
|
||||
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
|
||||
CONFIG_NETFILTER_XT_TARGET_MARK=y
|
||||
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
|
||||
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
|
||||
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
|
||||
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
|
||||
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
|
||||
CONFIG_NETFILTER_XT_MATCH_CPU=y
|
||||
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
|
||||
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
|
||||
CONFIG_NETFILTER_XT_MATCH_MAC=y
|
||||
CONFIG_NETFILTER_XT_MATCH_MARK=y
|
||||
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
|
||||
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
|
||||
CONFIG_NETFILTER_XT_MATCH_STATE=y
|
||||
CONFIG_NF_CONNTRACK_IPV4=y
|
||||
CONFIG_IP_NF_IPTABLES=y
|
||||
CONFIG_IP_NF_MATCH_AH=y
|
||||
CONFIG_IP_NF_MATCH_ECN=y
|
||||
CONFIG_IP_NF_MATCH_TTL=y
|
||||
CONFIG_IP_NF_FILTER=y
|
||||
CONFIG_IP_NF_TARGET_REJECT=y
|
||||
CONFIG_IP_NF_TARGET_ULOG=y
|
||||
CONFIG_IP_NF_MANGLE=y
|
||||
CONFIG_IP_NF_TARGET_CLUSTERIP=y
|
||||
CONFIG_IP_NF_TARGET_ECN=y
|
||||
CONFIG_IP_NF_TARGET_TTL=y
|
||||
CONFIG_IP_NF_RAW=y
|
||||
CONFIG_IP_NF_ARPTABLES=y
|
||||
CONFIG_IP_NF_ARPFILTER=y
|
||||
CONFIG_IP_NF_ARP_MANGLE=y
|
||||
CONFIG_IP6_NF_IPTABLES=m
|
||||
CONFIG_IP_SCTP=y
|
||||
CONFIG_VLAN_8021Q=y
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_CMA=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_PLATRAM=y
|
||||
CONFIG_MTD_M25P80=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_EEPROM_AT24=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
# CONFIG_I2C_COMPAT is not set
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_SPIDEV=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
# CONFIG_USB_SUPPORT is not set
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_COMMON_CLK_DEBUG=y
|
||||
CONFIG_MEMORY=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_JFFS2_FS_WBUF_VERIFY=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3_ACL=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NFSD=y
|
||||
CONFIG_NFSD_V3=y
|
||||
CONFIG_NFSD_V3_ACL=y
|
||||
CONFIG_PRINTK_TIME=y
|
||||
CONFIG_DEBUG_SHIRQ=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_CRYPTO_USER=y
|
||||
CONFIG_CRYPTO_NULL=y
|
||||
CONFIG_CRYPTO_AUTHENC=y
|
||||
CONFIG_CRYPTO_CBC=y
|
||||
CONFIG_CRYPTO_CTR=y
|
||||
CONFIG_CRYPTO_XCBC=y
|
||||
CONFIG_CRYPTO_DES=y
|
||||
CONFIG_CRYPTO_ANSI_CPRNG=y
|
||||
CONFIG_CRYPTO_USER_API_HASH=y
|
||||
CONFIG_CRYPTO_USER_API_SKCIPHER=y
|
||||
|
|
@ -0,0 +1,43 @@
|
|||
/*
|
||||
* Early serial debug output macro for Keystone SOCs
|
||||
*
|
||||
* Copyright 2013 Texas Instruments, Inc.
|
||||
* Santosh Shilimkar <santosh.shilimkar@ti.com>
|
||||
*
|
||||
* Based on RMKs low level debug code.
|
||||
* Copyright (C) 1994-1999 Russell King
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/serial_reg.h>
|
||||
|
||||
#define UART_SHIFT 2
|
||||
#if defined(CONFIG_DEBUG_KEYSTONE_UART0)
|
||||
#define UART_PHYS 0x02530c00
|
||||
#define UART_VIRT 0xfeb30c00
|
||||
#elif defined(CONFIG_DEBUG_KEYSTONE_UART1)
|
||||
#define UART_PHYS 0x02531000
|
||||
#define UART_VIRT 0xfeb31000
|
||||
#endif
|
||||
|
||||
.macro addruart, rp, rv, tmp
|
||||
ldr \rv, =UART_VIRT @ physical base address
|
||||
ldr \rp, =UART_PHYS @ virtual base address
|
||||
.endm
|
||||
|
||||
.macro senduart,rd,rx
|
||||
str \rd, [\rx, #UART_TX << UART_SHIFT]
|
||||
.endm
|
||||
|
||||
.macro busyuart,rd,rx
|
||||
1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
|
||||
and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
|
||||
teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
|
||||
bne 1002b
|
||||
.endm
|
||||
|
||||
.macro waituart,rd,rx
|
||||
.endm
|
||||
|
|
@ -0,0 +1,14 @@
|
|||
config ARCH_KEYSTONE
|
||||
bool "Texas Instruments Keystone Devices"
|
||||
depends on ARCH_MULTI_V7
|
||||
select CPU_V7
|
||||
select ARM_GIC
|
||||
select HAVE_ARM_ARCH_TIMER
|
||||
select CLKSRC_MMIO
|
||||
select GENERIC_CLOCKEVENTS
|
||||
select HAVE_SCHED_CLOCK
|
||||
select ARCH_WANT_OPTIONAL_GPIOLIB
|
||||
select ARM_ERRATA_798181
|
||||
help
|
||||
Support for boards based on the Texas Instruments Keystone family of
|
||||
SoCs.
|
||||
|
|
@ -0,0 +1 @@
|
|||
obj-y := keystone.o
|
||||
|
|
@ -0,0 +1 @@
|
|||
zreladdr-y := 0x80008000
|
||||
|
|
@ -0,0 +1,71 @@
|
|||
/*
|
||||
* Keystone2 based boards and SOC related code.
|
||||
*
|
||||
* Copyright 2013 Texas Instruments, Inc.
|
||||
* Cyril Chemparathy <cyril@ti.com>
|
||||
* Santosh Shilimkar <santosh.shillimkar@ti.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms and conditions of the GNU General Public License,
|
||||
* version 2, as published by the Free Software Foundation.
|
||||
*/
|
||||
#include <linux/io.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/of_address.h>
|
||||
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/time.h>
|
||||
|
||||
#define PLL_RESET_WRITE_KEY_MASK 0xffff0000
|
||||
#define PLL_RESET_WRITE_KEY 0x5a69
|
||||
#define PLL_RESET BIT(16)
|
||||
|
||||
static void __iomem *keystone_rstctrl;
|
||||
|
||||
static void __init keystone_init(void)
|
||||
{
|
||||
struct device_node *node;
|
||||
|
||||
node = of_find_compatible_node(NULL, NULL, "ti,keystone-reset");
|
||||
if (WARN_ON(!node))
|
||||
pr_warn("ti,keystone-reset node undefined\n");
|
||||
|
||||
keystone_rstctrl = of_iomap(node, 0);
|
||||
if (WARN_ON(!keystone_rstctrl))
|
||||
pr_warn("ti,keystone-reset iomap error\n");
|
||||
|
||||
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
|
||||
}
|
||||
|
||||
static const char *keystone_match[] __initconst = {
|
||||
"ti,keystone-evm",
|
||||
NULL,
|
||||
};
|
||||
|
||||
void keystone_restart(char mode, const char *cmd)
|
||||
{
|
||||
u32 val;
|
||||
|
||||
BUG_ON(!keystone_rstctrl);
|
||||
|
||||
/* Enable write access to RSTCTRL */
|
||||
val = readl(keystone_rstctrl);
|
||||
val &= PLL_RESET_WRITE_KEY_MASK;
|
||||
val |= PLL_RESET_WRITE_KEY;
|
||||
writel(val, keystone_rstctrl);
|
||||
|
||||
/* Reset the SOC */
|
||||
val = readl(keystone_rstctrl);
|
||||
val &= ~PLL_RESET;
|
||||
writel(val, keystone_rstctrl);
|
||||
}
|
||||
|
||||
DT_MACHINE_START(KEYSTONE, "Keystone")
|
||||
.init_machine = keystone_init,
|
||||
.dt_compat = keystone_match,
|
||||
.restart = keystone_restart,
|
||||
MACHINE_END
|
||||
Loading…
Reference in New Issue