diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index ccdd0e53451f..d0051a750587 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -36,6 +36,9 @@ Boards: - OMAP3 BeagleBoard : Low cost community board compatible = "ti,omap3-beagle", "ti,omap3" +- OMAP3 Tobi with Overo : Commercial expansion board with daughter board + compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3" + - OMAP4 SDP : Software Developement Board compatible = "ti,omap4-sdp", "ti,omap4430" diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt index 16695d9cf1e8..66788fda1db3 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt @@ -11,6 +11,11 @@ Required properties: - interrupt-controller: Mark the device node as an interrupt controller The first cell is the GPIO number. The second cell is not used. +- ti,use-leds : Enables LEDA and LEDB outputs if set +- ti,debounce : if n-th bit is set, debounces GPIO-n +- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1) +- ti,pullups : if n-th bit is set, set a pullup on GPIO-n +- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n Example: @@ -20,4 +25,5 @@ twl_gpio: gpio { gpio-controller; #interrupt-cells = <2>; interrupt-controller; + ti,use-leds; }; diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index 1a85f986961b..2f5322b119eb 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -56,3 +56,4 @@ stm,m41t00 Serial Access TIMEKEEPER stm,m41t62 Serial real-time clock (RTC) with alarm stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS ti,tsc2003 I2C Touch-Screen Controller +ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt new file mode 100644 index 000000000000..9ceb19e0c7fd --- /dev/null +++ b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt @@ -0,0 +1,52 @@ +* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin + +Required properties: +- compatible : Should be "jedec,lpddr2-timings" +- min-freq : minimum DDR clock frequency for the speed-bin. Type is +- max-freq : maximum DDR clock frequency for the speed-bin. Type is + +Optional properties: + +The following properties represent AC timing parameters from the memory +data-sheet of the device for a given speed-bin. All these properties are +of type and the default unit is ps (pico seconds). Parameters with +a different unit have a suffix indicating the unit such as 'tRAS-max-ns' +- tRCD +- tWR +- tRAS-min +- tRRD +- tWTR +- tXP +- tRTP +- tDQSCK-max +- tFAW +- tZQCS +- tZQinit +- tRPab +- tZQCL +- tCKESR +- tRAS-max-ns +- tDQSCK-max-derated + +Example: + +timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; +}; diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt new file mode 100644 index 000000000000..58354a075e13 --- /dev/null +++ b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt @@ -0,0 +1,102 @@ +* LPDDR2 SDRAM memories compliant to JEDEC JESD209-2 + +Required properties: +- compatible : Should be one of - "jedec,lpddr2-nvm", "jedec,lpddr2-s2", + "jedec,lpddr2-s4" + + "ti,jedec-lpddr2-s2" should be listed if the memory part is LPDDR2-S2 type + + "ti,jedec-lpddr2-s4" should be listed if the memory part is LPDDR2-S4 type + + "ti,jedec-lpddr2-nvm" should be listed if the memory part is LPDDR2-NVM type + +- density : representing density in Mb (Mega bits) + +- io-width : representing bus width. Possible values are 8, 16, and 32 + +Optional properties: + +The following optional properties represent the minimum value of some AC +timing parameters of the DDR device in terms of number of clock cycles. +These values shall be obtained from the device data-sheet. +- tRRD-min-tck +- tWTR-min-tck +- tXP-min-tck +- tRTP-min-tck +- tCKE-min-tck +- tRPab-min-tck +- tRCD-min-tck +- tWR-min-tck +- tRASmin-min-tck +- tCKESR-min-tck +- tFAW-min-tck + +Child nodes: +- The lpddr2 node may have one or more child nodes of type "lpddr2-timings". + "lpddr2-timings" provides AC timing parameters of the device for + a given speed-bin. The user may provide the timings for as many + speed-bins as is required. Please see Documentation/devicetree/ + bindings/lpddr2/lpddr2-timings.txt for more information on "lpddr2-timings" + +Example: + +elpida_ECB240ABACN : lpddr2 { + compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4"; + density = <2048>; + io-width = <32>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + }; + + timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <200000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <10000>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + }; + +} diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt new file mode 100644 index 000000000000..938f8e1ba205 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -0,0 +1,55 @@ +* EMIF family of TI SDRAM controllers + +EMIF - External Memory Interface - is an SDRAM controller used in +TI SoCs. EMIF supports, based on the IP revision, one or more of +DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance +of the EMIF IP and memory parts attached to it. + +Required properties: +- compatible : Should be of the form "ti,emif-" where + is the IP revision of the specific EMIF instance. + +- phy-type : indicating the DDR phy type. Following are the + allowed values + <1> : Attila PHY + <2> : Intelli PHY + +- device-handle : phandle to a "lpddr2" node representing the memory part + +- ti,hwmods : For TI hwmods processing and omap device creation + the value shall be "emif" where is the number of the EMIF + instance with base 1. + +Optional properties: +- cs1-used : Have this property if CS1 of this EMIF + instance has a memory part attached to it. If there is a memory + part attached to CS1, it should be the same type as the one on CS0, + so there is no need to give the details of this memory part. + +- cal-resistor-per-cs : Have this property if the board has one + calibration resistor per chip-select. + +- hw-caps-read-idle-ctrl: Have this property if the controller + supports read idle window programming + +- hw-caps-dll-calib-ctrl: Have this property if the controller + supports dll calibration control + +- hw-caps-ll-interface : Have this property if the controller + has a low latency interface and corresponding interrupt events + +- hw-caps-temp-alert : Have this property if the controller + has capability for generating SDRAM temperature alerts + +Example: + +emif1: emif@0x4c000000 { + compatible = "ti,emif-4d"; + ti,hwmods = "emif2"; + phy-type = <1>; + device-handle = <&elpida_ECB240ABACN>; + cs1-used; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 917e7843bee7..c634f87e230e 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -19,11 +19,11 @@ memory { }; ocp { - uart1: serial@44E09000 { + uart1: serial@44e09000 { status = "okay"; }; - i2c1: i2c@44E0B000 { + i2c1: i2c@44e0b000 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 9fcbacdb8f38..185d6325a458 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -19,16 +19,16 @@ memory { }; ocp { - uart1: serial@44E09000 { + uart1: serial@44e09000 { status = "okay"; }; - i2c1: i2c@44E0B000 { + i2c1: i2c@44e0b000 { status = "okay"; clock-frequency = <400000>; - tps: tps@2D { - reg = <0x2D>; + tps: tps@2d { + reg = <0x2d>; }; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index dde76f7e81a8..bb31bff01998 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -69,39 +69,54 @@ gpio1: gpio@44e07000 { #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x44e07000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <96>; }; - gpio2: gpio@4804C000 { + gpio2: gpio@4804c000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x4804c000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <98>; }; - gpio3: gpio@481AC000 { + gpio3: gpio@481ac000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x481ac000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <32>; }; - gpio4: gpio@481AE000 { + gpio4: gpio@481ae000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x481ae000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <62>; }; - uart1: serial@44E09000 { + uart1: serial@44e09000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart1"; clock-frequency = <48000000>; + reg = <0x44e09000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <72>; status = "disabled"; }; @@ -109,6 +124,9 @@ uart2: serial@48022000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart2"; clock-frequency = <48000000>; + reg = <0x48022000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <73>; status = "disabled"; }; @@ -116,57 +134,81 @@ uart3: serial@48024000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart3"; clock-frequency = <48000000>; + reg = <0x48024000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <74>; status = "disabled"; }; - uart4: serial@481A6000 { + uart4: serial@481a6000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart4"; clock-frequency = <48000000>; + reg = <0x481a6000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <44>; status = "disabled"; }; - uart5: serial@481A8000 { + uart5: serial@481a8000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart5"; clock-frequency = <48000000>; + reg = <0x481a8000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <45>; status = "disabled"; }; - uart6: serial@481AA000 { + uart6: serial@481aa000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart6"; clock-frequency = <48000000>; + reg = <0x481aa000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <46>; status = "disabled"; }; - i2c1: i2c@44E0B000 { + i2c1: i2c@44e0b000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; + reg = <0x44e0b000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <70>; status = "disabled"; }; - i2c2: i2c@4802A000 { + i2c2: i2c@4802a000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; + reg = <0x4802a000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <71>; status = "disabled"; }; - i2c3: i2c@4819C000 { + i2c3: i2c@4819c000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; + reg = <0x4819c000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <30>; status = "disabled"; }; wdt2: wdt@44e35000 { compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; + reg = <0x44e35000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <91>; }; }; }; diff --git a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi new file mode 100644 index 000000000000..f97f70f83374 --- /dev/null +++ b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi @@ -0,0 +1,67 @@ +/* + * Common devices used in different OMAP boards + */ + +/ { + elpida_ECB240ABACN: lpddr2 { + compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4"; + density = <2048>; + io-width = <32>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + + timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <200000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <10000>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 25b50b759dec..77b84e17c477 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap2.dtsi" +/include/ "omap2420.dtsi" / { model = "TI OMAP2420 H4 board"; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi new file mode 100644 index 000000000000..6174d3d93b1f --- /dev/null +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -0,0 +1,39 @@ +/* + * Device Tree Source for OMAP2420 SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap2.dtsi" + +/ { + compatible = "ti,omap2420", "ti,omap2"; + + ocp { + mcbsp1: mcbsp@48074000 { + compatible = "ti,omap2420-mcbsp"; + reg = <0x48074000 0xff>; + reg-names = "mpu"; + interrupts = <59>, /* TX interrupt */ + <60>; /* RX interrupt */ + interrupt-names = "tx", "rx"; + interrupt-parent = <&intc>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@48076000 { + compatible = "ti,omap2420-mcbsp"; + reg = <0x48076000 0xff>; + reg-names = "mpu"; + interrupts = <62>, /* TX interrupt */ + <63>; /* RX interrupt */ + interrupt-names = "tx", "rx"; + interrupt-parent = <&intc>; + ti,hwmods = "mcbsp2"; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi new file mode 100644 index 000000000000..59a639a33794 --- /dev/null +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -0,0 +1,83 @@ +/* + * Device Tree Source for OMAP243x SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap2.dtsi" + +/ { + compatible = "ti,omap2430", "ti,omap2"; + + ocp { + mcbsp1: mcbsp@48074000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x48074000 0xff>; + reg-names = "mpu"; + interrupts = <64>, /* OCP compliant interrupt */ + <59>, /* TX interrupt */ + <60>, /* RX interrupt */ + <61>; /* RX overflow interrupt */ + interrupt-names = "common", "tx", "rx", "rx_overflow"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@48076000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x48076000 0xff>; + reg-names = "mpu"; + interrupts = <16>, /* OCP compliant interrupt */ + <62>, /* TX interrupt */ + <63>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@4808c000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x4808c000 0xff>; + reg-names = "mpu"; + interrupts = <17>, /* OCP compliant interrupt */ + <89>, /* TX interrupt */ + <90>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; + + mcbsp4: mcbsp@4808e000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x4808e000 0xff>; + reg-names = "mpu"; + interrupts = <18>, /* OCP compliant interrupt */ + <54>, /* TX interrupt */ + <55>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp4"; + }; + + mcbsp5: mcbsp@48096000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x48096000 0xff>; + reg-names = "mpu"; + interrupts = <19>, /* OCP compliant interrupt */ + <81>, /* TX interrupt */ + <82>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp5"; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index e60cba0ed6f1..a9d98d5ade9a 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -17,6 +17,34 @@ memory { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; + + leds { + compatible = "gpio-leds"; + pmu_stat { + label = "beagleboard::pmu_stat"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + }; + + heartbeat { + label = "beagleboard::usr0"; + gpios = <&gpio5 22 0>; /* 150 -> D6 LED */ + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "beagleboard::usr1"; + gpios = <&gpio5 21 0>; /* 149 -> D7 LED */ + linux,default-trigger = "mmc0"; + }; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; }; &i2c1 { @@ -32,6 +60,12 @@ vsim: regulator-vsim { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; }; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; }; }; @@ -67,3 +101,15 @@ &mmc2 { &mmc3 { status = "disabled"; }; + +&twl_gpio { + ti,use-leds; + /* pullups: BIT(1) */ + ti,pullups = <0x000002>; + /* + * pulldowns: + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c4>; +}; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index f349ee9182ce..e8ba1c247a39 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -17,6 +17,15 @@ memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + + leds { + compatible = "gpio-leds"; + ledb { + label = "omap3evm::ledb"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + linux,default-trigger = "default-on"; + }; + }; }; &i2c1 { @@ -46,3 +55,7 @@ tvp5146@5c { reg = <0x5c>; }; }; + +&twl_gpio { + ti,use-leds; +}; diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi new file mode 100644 index 000000000000..89808ce01673 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * The Gumstix Overo must be combined with an expansion board. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + overo { + label = "overo:blue:COM"; + gpios = <&twl_gpio 19 0>; + linux,default-trigger = "mmc0"; + }; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +/* i2c2 pins are used for gpio */ +&i2c2 { + status = "disabled"; +}; + +/* on board microSD slot */ +&mmc1 { + vmmc-supply = <&vmmc1>; + bus-width = <4>; +}; + +/* optional on board WiFi */ +&mmc2 { + bus-width = <4>; +}; + +&twl_gpio { + ti,use-leds; +}; diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts new file mode 100644 index 000000000000..a13d12de77ff --- /dev/null +++ b/arch/arm/boot/dts/omap3-tobi.dts @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Tobi expansion board is manufactured by Gumstix Inc. + */ + +/include/ "omap3-overo.dtsi" + +/ { + model = "TI OMAP3 Gumstix Overo on Tobi"; + compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"; + + leds { + compatible = "gpio-leds"; + heartbeat { + label = "overo:red:gpio21"; + gpios = <&gpio1 21 0>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; +}; + +&mmc3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 810947198208..f024bb3034a6 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -220,5 +220,74 @@ wdt2: wdt@48314000 { compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; }; + + mcbsp1: mcbsp@48074000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x48074000 0xff>; + reg-names = "mpu"; + interrupts = <16>, /* OCP compliant interrupt */ + <59>, /* TX interrupt */ + <60>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@49022000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49022000 0xff>, + <0x49028000 0xff>; + reg-names = "mpu", "sidetone"; + interrupts = <17>, /* OCP compliant interrupt */ + <62>, /* TX interrupt */ + <63>, /* RX interrupt */ + <4>; /* Sidetone */ + interrupt-names = "common", "tx", "rx", "sidetone"; + interrupt-parent = <&intc>; + ti,buffer-size = <1280>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@49024000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49024000 0xff>, + <0x4902a000 0xff>; + reg-names = "mpu", "sidetone"; + interrupts = <22>, /* OCP compliant interrupt */ + <89>, /* TX interrupt */ + <90>, /* RX interrupt */ + <5>; /* Sidetone */ + interrupt-names = "common", "tx", "rx", "sidetone"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; + + mcbsp4: mcbsp@49026000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49026000 0xff>; + reg-names = "mpu"; + interrupts = <23>, /* OCP compliant interrupt */ + <54>, /* TX interrupt */ + <55>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp4"; + }; + + mcbsp5: mcbsp@48096000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x48096000 0xff>; + reg-names = "mpu"; + interrupts = <27>, /* OCP compliant interrupt */ + <81>, /* TX interrupt */ + <82>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp5"; + }; }; }; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 9880c12877b3..20b966ee1bb3 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -8,6 +8,7 @@ /dts-v1/; /include/ "omap4.dtsi" +/include/ "elpida_ecb240abacn.dtsi" / { model = "TI OMAP4 PandaBoard"; @@ -126,3 +127,13 @@ &mmc5 { ti,non-removable; bus-width = <4>; }; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index dbcdc4a79491..7e83a61de0b2 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -8,6 +8,7 @@ /dts-v1/; /include/ "omap4.dtsi" +/include/ "elpida_ecb240abacn.dtsi" / { model = "TI OMAP4 SDP board"; @@ -226,3 +227,83 @@ &mmc5 { bus-width = <4>; ti,non-removable; }; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = <0x00000012 /* KEY_E */ + 0x00010013 /* KEY_R */ + 0x00020014 /* KEY_T */ + 0x00030066 /* KEY_HOME */ + 0x0004003f /* KEY_F5 */ + 0x000500f0 /* KEY_UNKNOWN */ + 0x00060017 /* KEY_I */ + 0x0007002a /* KEY_LEFTSHIFT */ + 0x01000020 /* KEY_D*/ + 0x01010021 /* KEY_F */ + 0x01020022 /* KEY_G */ + 0x010300e7 /* KEY_SEND */ + 0x01040040 /* KEY_F6 */ + 0x010500f0 /* KEY_UNKNOWN */ + 0x01060025 /* KEY_K */ + 0x0107001c /* KEY_ENTER */ + 0x0200002d /* KEY_X */ + 0x0201002e /* KEY_C */ + 0x0202002f /* KEY_V */ + 0x0203006b /* KEY_END */ + 0x02040041 /* KEY_F7 */ + 0x020500f0 /* KEY_UNKNOWN */ + 0x02060034 /* KEY_DOT */ + 0x0207003a /* KEY_CAPSLOCK */ + 0x0300002c /* KEY_Z */ + 0x0301004e /* KEY_KPLUS */ + 0x03020030 /* KEY_B */ + 0x0303003b /* KEY_F1 */ + 0x03040042 /* KEY_F8 */ + 0x030500f0 /* KEY_UNKNOWN */ + 0x03060018 /* KEY_O */ + 0x03070039 /* KEY_SPACE */ + 0x04000011 /* KEY_W */ + 0x04010015 /* KEY_Y */ + 0x04020016 /* KEY_U */ + 0x0403003c /* KEY_F2 */ + 0x04040073 /* KEY_VOLUMEUP */ + 0x040500f0 /* KEY_UNKNOWN */ + 0x04060026 /* KEY_L */ + 0x04070069 /* KEY_LEFT */ + 0x0500001f /* KEY_S */ + 0x05010023 /* KEY_H */ + 0x05020024 /* KEY_J */ + 0x0503003d /* KEY_F3 */ + 0x05040043 /* KEY_F9 */ + 0x05050072 /* KEY_VOLUMEDOWN */ + 0x05060032 /* KEY_M */ + 0x0507006a /* KEY_RIGHT */ + 0x06000010 /* KEY_Q */ + 0x0601001e /* KEY_A */ + 0x06020031 /* KEY_N */ + 0x0603009e /* KEY_BACK */ + 0x0604000e /* KEY_BACKSPACE */ + 0x060500f0 /* KEY_UNKNOWN */ + 0x06060019 /* KEY_P */ + 0x06070067 /* KEY_UP */ + 0x07000094 /* KEY_PROG1 */ + 0x07010095 /* KEY_PROG2 */ + 0x070200ca /* KEY_PROG3 */ + 0x070300cb /* KEY_PROG4 */ + 0x0704003e /* KEY_F4 */ + 0x070500f0 /* KEY_UNKNOWN */ + 0x07060160 /* KEY_OK */ + 0x0707006c>; /* KEY_DOWN */ + linux,input-no-autorepeat; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 04cbbcb6ff91..75095e306d77 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -30,12 +30,35 @@ aliases { cpus { cpu@0 { compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; }; cpu@1 { compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; }; }; + gic: interrupt-controller@48241000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48241000 0x1000>, + <0x48240100 0x0100>; + }; + + L2: l2-cache-controller@48242000 { + compatible = "arm,pl310-cache"; + reg = <0x48242000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + local-timer@0x48240600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x48240600 0x20>; + interrupts = <1 13 0x304>; + }; + /* * The soc node represents the soc top level view. It is uses for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -61,30 +84,6 @@ iva { /* * XXX: Use a flat representation of the OMAP4 interconnect. * The real OMAP interconnect network is quite complex. - * - * MPU -+-- MPU_PRIVATE - GIC, L2 - * | - * +----------------+----------+ - * | | | - * + +- EMIF - DDR | - * | | | - * | + +--------+ - * | | | - * | +- L4_ABE - AESS, MCBSP, TIMERs... - * | | - * +- L3_MAIN --+- L4_CORE - IPs... - * | - * +- L4_PER - IPs... - * | - * +- L4_CFG -+- L4_WKUP - IPs... - * | | - * | +- IPs... - * +- IPU ----+ - * | | - * +- DSP ----+ - * | | - * +- DSS ----+ - * * Since that will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. @@ -96,16 +95,10 @@ ocp { ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; - gic: interrupt-controller@48241000 { - compatible = "arm,cortex-a9-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x48241000 0x1000>, - <0x48240100 0x0100>; - }; - gpio1: gpio@4a310000 { compatible = "ti,omap4-gpio"; + reg = <0x4a310000 0x200>; + interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -115,6 +108,8 @@ gpio1: gpio@4a310000 { gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; + reg = <0x48055000 0x200>; + interrupts = <0 30 0x4>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -124,6 +119,8 @@ gpio2: gpio@48055000 { gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; + reg = <0x48057000 0x200>; + interrupts = <0 31 0x4>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -133,6 +130,8 @@ gpio3: gpio@48057000 { gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; + reg = <0x48059000 0x200>; + interrupts = <0 32 0x4>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -142,6 +141,8 @@ gpio4: gpio@48059000 { gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; + reg = <0x4805b000 0x200>; + interrupts = <0 33 0x4>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -151,6 +152,8 @@ gpio5: gpio@4805b000 { gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; + reg = <0x4805d000 0x200>; + interrupts = <0 34 0x4>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -160,30 +163,40 @@ gpio6: gpio@4805d000 { uart1: serial@4806a000 { compatible = "ti,omap4-uart"; + reg = <0x4806a000 0x100>; + interrupts = <0 72 0x4>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap4-uart"; + reg = <0x4806c000 0x100>; + interrupts = <0 73 0x4>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; uart3: serial@48020000 { compatible = "ti,omap4-uart"; + reg = <0x48020000 0x100>; + interrupts = <0 74 0x4>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; uart4: serial@4806e000 { compatible = "ti,omap4-uart"; + reg = <0x4806e000 0x100>; + interrupts = <0 70 0x4>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; + reg = <0x48070000 0x100>; + interrupts = <0 56 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -191,6 +204,8 @@ i2c1: i2c@48070000 { i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; + reg = <0x48072000 0x100>; + interrupts = <0 57 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -198,6 +213,8 @@ i2c2: i2c@48072000 { i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; + reg = <0x48060000 0x100>; + interrupts = <0 61 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; @@ -205,6 +222,8 @@ i2c3: i2c@48060000 { i2c4: i2c@48350000 { compatible = "ti,omap4-i2c"; + reg = <0x48350000 0x100>; + interrupts = <0 62 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; @@ -212,6 +231,8 @@ i2c4: i2c@48350000 { mcspi1: spi@48098000 { compatible = "ti,omap4-mcspi"; + reg = <0x48098000 0x200>; + interrupts = <0 65 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; @@ -220,6 +241,8 @@ mcspi1: spi@48098000 { mcspi2: spi@4809a000 { compatible = "ti,omap4-mcspi"; + reg = <0x4809a000 0x200>; + interrupts = <0 66 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; @@ -228,6 +251,8 @@ mcspi2: spi@4809a000 { mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; + reg = <0x480b8000 0x200>; + interrupts = <0 91 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; @@ -236,6 +261,8 @@ mcspi3: spi@480b8000 { mcspi4: spi@480ba000 { compatible = "ti,omap4-mcspi"; + reg = <0x480ba000 0x200>; + interrupts = <0 48 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; @@ -244,6 +271,8 @@ mcspi4: spi@480ba000 { mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + interrupts = <0 83 0x4>; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -251,30 +280,40 @@ mmc1: mmc@4809c000 { mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480b4000 0x400>; + interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; }; mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480ad000 0x400>; + interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; }; mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d1000 0x400>; + interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; }; mmc5: mmc@480d5000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d5000 0x400>; + interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; }; wdt2: wdt@4a314000 { compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + reg = <0x4a314000 0x80>; + interrupts = <0 80 0x4>; ti,hwmods = "wd_timer2"; }; @@ -282,6 +321,7 @@ mcpdm: mcpdm@40132000 { compatible = "ti,omap4-mcpdm"; reg = <0x40132000 0x7f>, /* MPU private access */ <0x49032000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; @@ -291,9 +331,87 @@ dmic: dmic@4012e000 { compatible = "ti,omap4-dmic"; reg = <0x4012e000 0x7f>, /* MPU private access */ <0x4902e000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; + + mcbsp1: mcbsp@40122000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40122000 0xff>, /* MPU private access */ + <0x49022000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 17 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@40124000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40124000 0xff>, /* MPU private access */ + <0x49024000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 22 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@40126000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40126000 0xff>, /* MPU private access */ + <0x49026000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 23 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; + + mcbsp4: mcbsp@48096000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x48096000 0xff>; /* L4 Interconnect */ + reg-names = "mpu"; + interrupts = <0 16 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp4"; + }; + + keypad: keypad@4a31c000 { + compatible = "ti,omap4-keypad"; + reg = <0x4a31c000 0x80>; + interrupts = <0 120 0x4>; + reg-names = "mpu"; + ti,hwmods = "kbd"; + }; + + emif1: emif@4c000000 { + compatible = "ti,emif-4d"; + reg = <0x4c000000 0x100>; + interrupts = <0 110 0x4>; + ti,hwmods = "emif1"; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; + + emif2: emif@4d000000 { + compatible = "ti,emif-4d"; + reg = <0x4d000000 0x100>; + interrupts = <0 111 0x4>; + ti,hwmods = "emif2"; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; }; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index 7bb0c9dc5257..9c41a3f311aa 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -24,6 +24,7 @@ vmmcsd_fixed: fixedregulator-mmcsd { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; + }; &mmc1 { @@ -49,3 +50,35 @@ &mmc4 { &mmc5 { status = "disabled"; }; + +&i2c2 { + clock-frequency = <400000>; + + /* Pressure Sensor */ + bmp085@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + + /* Temperature Sensor */ + tmp102@48{ + compatible = "ti,tmp102"; + reg = <0x48>; + }; +}; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = <0x02020073 /* VOLUP */ + 0x02030072 /* VOLDOWM */ + 0x020400e7 /* SEND */ + 0x02050066 /* HOME */ + 0x0206006b /* END */ + 0x020700d9>; /* SEARCH */ + linux,input-no-autorepeat; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 881d60cb12ae..9ac75b37c992 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -145,6 +145,41 @@ gpio8: gpio@48053000 { #interrupt-cells = <1>; }; + i2c1: i2c@48070000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + }; + + i2c2: i2c@48072000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + }; + + i2c3: i2c@48060000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; + }; + + i2c4: i2c@4807A000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c4"; + }; + + i2c5: i2c@4807C000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c5"; + }; + uart1: serial@4806a000 { compatible = "ti,omap4-uart"; ti,hwmods = "uart1"; @@ -211,5 +246,66 @@ mmc5: mmc@480d5000 { ti,hwmods = "mmc5"; ti,needs-special-reset; }; + + keypad: keypad@4ae1c000 { + compatible = "ti,omap4-keypad"; + ti,hwmods = "kbd"; + }; + + mcpdm: mcpdm@40132000 { + compatible = "ti,omap4-mcpdm"; + reg = <0x40132000 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 112 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "mcpdm"; + }; + + dmic: dmic@4012e000 { + compatible = "ti,omap4-dmic"; + reg = <0x4012e000 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 114 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "dmic"; + }; + + mcbsp1: mcbsp@40122000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40122000 0xff>, /* MPU private access */ + <0x49022000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 17 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@40124000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40124000 0xff>, /* MPU private access */ + <0x49024000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 22 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@40126000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40126000 0xff>, /* MPU private access */ + <0x49026000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 23 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; }; }; diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot index 6cf1c2d336da..18813ab1bb3c 100644 --- a/arch/arm/mach-omap2/Makefile.boot +++ b/arch/arm/mach-omap2/Makefile.boot @@ -3,7 +3,7 @@ params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 dtb-$(CONFIG_SOC_OMAP2420) += omap2420-h4.dtb -dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle.dtb omap3-evm.dtb +dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle.dtb omap3-evm.dtb omap3-tobi.dtb dtb-$(CONFIG_ARCH_OMAP4) += omap4-panda.dtb omap4-pandaES.dtb dtb-$(CONFIG_ARCH_OMAP4) += omap4-var_som.dtb omap4-sdp.dtb dtb-$(CONFIG_SOC_OMAP5) += omap5-evm.dtb diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index c29dee998a79..6f95992f37c6 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -171,7 +172,10 @@ static int __init omap_l2_cache_init(void) /* Enable PL310 L2 Cache controller */ omap_smc1(0x102, 0x1); - l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK); + if (of_have_populated_dt()) + l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK); + else + l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK); /* * Override default outer_cache.disable with a OMAP4 diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6ca8e519968d..7768804457e3 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -3157,6 +3157,33 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) return r; } +/** + * omap_hwmod_fill_dma_resources - fill struct resource array with dma data + * @oh: struct omap_hwmod * + * @res: pointer to the array of struct resource to fill + * + * Fill the struct resource array @res with dma resource data from the + * omap_hwmod @oh. Intended to be called by code that registers + * omap_devices. See also omap_hwmod_count_resources(). Returns the + * number of array elements filled. + */ +int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res) +{ + int i, sdma_reqs_cnt; + int r = 0; + + sdma_reqs_cnt = _count_sdma_reqs(oh); + for (i = 0; i < sdma_reqs_cnt; i++) { + (res + r)->name = (oh->sdma_reqs + i)->name; + (res + r)->start = (oh->sdma_reqs + i)->dma_req; + (res + r)->end = (oh->sdma_reqs + i)->dma_req; + (res + r)->flags = IORESOURCE_DMA; + r++; + } + + return r; +} + /** * omap_hwmod_get_resource_byname - fetch IP block integration data by name * @oh: struct omap_hwmod * to operate on diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 2ff6d41ec6c6..31f9c936125f 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include @@ -386,6 +387,11 @@ static void __init omap4_timer_init(void) if (omap_rev() != OMAP4430_REV_ES1_0) { int err; + if (of_have_populated_dt()) { + twd_local_timer_of_register(); + return; + } + err = twd_local_timer_register(&twd_local_timer); if (err) pr_err("twd_local_timer_register failed %d\n", err); diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 6132972aff37..5857b9cd6eb9 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -615,6 +615,7 @@ int omap_hwmod_softreset(struct omap_hwmod *oh); int omap_hwmod_count_resources(struct omap_hwmod *oh); int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); +int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res); int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, const char *name, struct resource *res); diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index c490240bb82c..6f5c58096819 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -370,6 +370,14 @@ static int omap_device_build_from_dt(struct platform_device *pdev) goto odbfd_exit1; } + /* Fix up missing resource names */ + for (i = 0; i < pdev->num_resources; i++) { + struct resource *r = &pdev->resource[i]; + + if (r->name == NULL) + r->name = dev_name(&pdev->dev); + } + if (of_get_property(node, "ti,no_idle_on_suspend", NULL)) omap_device_disable_idle_on_suspend(pdev); @@ -485,6 +493,33 @@ static int omap_device_fill_resources(struct omap_device *od, return 0; } +/** + * _od_fill_dma_resources - fill in array of struct resource with dma resources + * @od: struct omap_device * + * @res: pointer to an array of struct resource to be filled in + * + * Populate one or more empty struct resource pointed to by @res with + * the dma resource data for this omap_device @od. Used by + * omap_device_alloc() after calling omap_device_count_resources(). + * + * Ideally this function would not be needed at all. If we have + * mechanism to get dma resources from DT. + * + * Returns 0. + */ +static int _od_fill_dma_resources(struct omap_device *od, + struct resource *res) +{ + int i, r; + + for (i = 0; i < od->hwmods_cnt; i++) { + r = omap_hwmod_fill_dma_resources(od->hwmods[i], res); + res += r; + } + + return 0; +} + /** * omap_device_alloc - allocate an omap_device * @pdev: platform_device that will be included in this omap_device @@ -524,24 +559,44 @@ struct omap_device *omap_device_alloc(struct platform_device *pdev, od->hwmods = hwmods; od->pdev = pdev; - /* - * HACK: Ideally the resources from DT should match, and hwmod - * should just add the missing ones. Since the name is not - * properly populated by DT, stick to hwmod resources only. - */ - if (pdev->num_resources && pdev->resource) - dev_warn(&pdev->dev, "%s(): resources already allocated %d\n", - __func__, pdev->num_resources); - res_count = omap_device_count_resources(od); - if (res_count > 0) { - dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n", - __func__, res_count); + /* + * DT Boot: + * OF framework will construct the resource structure (currently + * does for MEM & IRQ resource) and we should respect/use these + * resources, killing hwmod dependency. + * If pdev->num_resources > 0, we assume that MEM & IRQ resources + * have been allocated by OF layer already (through DTB). + * + * Non-DT Boot: + * Here, pdev->num_resources = 0, and we should get all the + * resources from hwmod. + * + * TODO: Once DMA resource is available from OF layer, we should + * kill filling any resources from hwmod. + */ + if (res_count > pdev->num_resources) { + /* Allocate resources memory to account for new resources */ res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL); if (!res) goto oda_exit3; - omap_device_fill_resources(od, res); + /* + * If pdev->num_resources > 0, then assume that, + * MEM and IRQ resources will only come from DT and only + * fill DMA resource from hwmod layer. + */ + if (pdev->num_resources && pdev->resource) { + dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n", + __func__, res_count); + memcpy(res, pdev->resource, + sizeof(struct resource) * pdev->num_resources); + _od_fill_dma_resources(od, &res[pdev->num_resources]); + } else { + dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n", + __func__, res_count); + omap_device_fill_resources(od, res); + } ret = platform_device_add_resources(pdev, res, res_count); kfree(res); diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c index 94256fe7bf36..f923252da839 100644 --- a/drivers/gpio/gpio-twl4030.c +++ b/drivers/gpio/gpio-twl4030.c @@ -395,6 +395,31 @@ static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd) static int gpio_twl4030_remove(struct platform_device *pdev); +static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev) +{ + struct twl4030_gpio_platform_data *omap_twl_info; + + omap_twl_info = devm_kzalloc(dev, sizeof(*omap_twl_info), GFP_KERNEL); + if (!omap_twl_info) + return NULL; + + omap_twl_info->gpio_base = -1; + + omap_twl_info->use_leds = of_property_read_bool(dev->of_node, + "ti,use-leds"); + + of_property_read_u32(dev->of_node, "ti,debounce", + &omap_twl_info->debounce); + of_property_read_u32(dev->of_node, "ti,mmc-cd", + (u32 *)&omap_twl_info->mmc_cd); + of_property_read_u32(dev->of_node, "ti,pullups", + &omap_twl_info->pullups); + of_property_read_u32(dev->of_node, "ti,pulldowns", + &omap_twl_info->pulldowns); + + return omap_twl_info; +} + static int __devinit gpio_twl4030_probe(struct platform_device *pdev) { struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; @@ -423,39 +448,42 @@ static int __devinit gpio_twl4030_probe(struct platform_device *pdev) twl4030_gpio_irq_base = irq_base; no_irqs: - twl_gpiochip.base = -1; twl_gpiochip.ngpio = TWL4030_GPIO_MAX; twl_gpiochip.dev = &pdev->dev; - if (pdata) { - twl_gpiochip.base = pdata->gpio_base; + if (node) + pdata = of_gpio_twl4030(&pdev->dev); - /* - * NOTE: boards may waste power if they don't set pullups - * and pulldowns correctly ... default for non-ULPI pins is - * pulldown, and some other pins may have external pullups - * or pulldowns. Careful! - */ - ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); - if (ret) - dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", - pdata->pullups, pdata->pulldowns, - ret); - - ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd); - if (ret) - dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n", - pdata->debounce, pdata->mmc_cd, - ret); - - /* - * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, - * is (still) clear if use_leds is set. - */ - if (pdata->use_leds) - twl_gpiochip.ngpio += 2; + if (pdata == NULL) { + dev_err(&pdev->dev, "Platform data is missing\n"); + return -ENXIO; } + twl_gpiochip.base = pdata->gpio_base; + + /* + * NOTE: boards may waste power if they don't set pullups + * and pulldowns correctly ... default for non-ULPI pins is + * pulldown, and some other pins may have external pullups + * or pulldowns. Careful! + */ + ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); + if (ret) + dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", + pdata->pullups, pdata->pulldowns, ret); + + ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd); + if (ret) + dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n", + pdata->debounce, pdata->mmc_cd, ret); + + /* + * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, + * is (still) clear if use_leds is set. + */ + if (pdata->use_leds) + twl_gpiochip.ngpio += 2; + ret = gpiochip_add(&twl_gpiochip); if (ret < 0) { dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);