scsi: ufs: core: Move the 4K alignment code into the Exynos driver

The DMA alignment for the Exynos controller follows directly from the PRDT
segment size configured in ufs-exynos.c. Hence, move the DMA alignment code
into the Exynos driver source code.

Cc: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230921192335.676924-3-bvanassche@acm.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit is contained in:
Bart Van Assche 2023-09-21 12:22:47 -07:00 committed by Martin K. Petersen
parent cdaaff61d3
commit 858231bdb2
3 changed files with 13 additions and 9 deletions

View file

@ -5095,8 +5095,7 @@ static int ufshcd_slave_configure(struct scsi_device *sdev)
struct request_queue *q = sdev->request_queue;
blk_queue_update_dma_pad(q, PRDT_DATA_BYTE_COUNT_PAD - 1);
if (hba->quirks & UFSHCD_QUIRK_4KB_DMA_ALIGNMENT)
blk_queue_update_dma_alignment(q, SZ_4K - 1);
/*
* Block runtime-pm until all consumers are added.
* Refer ufshcd_setup_links().
@ -5112,6 +5111,9 @@ static int ufshcd_slave_configure(struct scsi_device *sdev)
*/
sdev->silence_suspend = 1;
if (hba->vops && hba->vops->config_scsi_dev)
hba->vops->config_scsi_dev(sdev);
ufshcd_crypto_register(hba, q);
return 0;

View file

@ -1511,6 +1511,11 @@ static int fsd_ufs_pre_link(struct exynos_ufs *ufs)
return 0;
}
static void exynos_ufs_config_scsi_dev(struct scsi_device *sdev)
{
blk_queue_update_dma_alignment(sdev->request_queue, SZ_4K - 1);
}
static int fsd_ufs_post_link(struct exynos_ufs *ufs)
{
int i;
@ -1579,6 +1584,7 @@ static const struct ufs_hba_variant_ops ufs_hba_exynos_ops = {
.hibern8_notify = exynos_ufs_hibern8_notify,
.suspend = exynos_ufs_suspend,
.resume = exynos_ufs_resume,
.config_scsi_dev = exynos_ufs_config_scsi_dev,
};
static struct ufs_hba_variant_ops ufs_hba_exynosauto_vh_ops = {
@ -1680,8 +1686,7 @@ static const struct exynos_ufs_drv_data exynos_ufs_drvs = {
UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR |
UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR |
UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL |
UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING |
UFSHCD_QUIRK_4KB_DMA_ALIGNMENT,
UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING,
.opts = EXYNOS_UFS_OPT_HAS_APB_CLK_CTRL |
EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL |
EXYNOS_UFS_OPT_BROKEN_RX_SEL_IDX |

View file

@ -28,6 +28,7 @@
#define UFSHCD "ufshcd"
struct scsi_device;
struct ufs_hba;
enum dev_cmd_type {
@ -371,6 +372,7 @@ struct ufs_hba_variant_ops {
int (*get_outstanding_cqs)(struct ufs_hba *hba,
unsigned long *ocqs);
int (*config_esi)(struct ufs_hba *hba);
void (*config_scsi_dev)(struct scsi_device *sdev);
};
/* clock gating state */
@ -596,11 +598,6 @@ enum ufshcd_quirks {
*/
UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING = 1 << 13,
/*
* Align DMA SG entries on a 4 KiB boundary.
*/
UFSHCD_QUIRK_4KB_DMA_ALIGNMENT = 1 << 14,
/*
* This quirk needs to be enabled if the host controller does not
* support UIC command