Merge branch 'pci/myron-pcibios_setup' into next

* pci/myron-pcibios_setup:
  xtensa/PCI: factor out pcibios_setup()
  x86/PCI: adjust section annotations for pcibios_setup()
  unicore32/PCI: adjust section annotations for pcibios_setup()
  tile/PCI: factor out pcibios_setup()
  sparc/PCI: factor out pcibios_setup()
  sh/PCI: adjust section annotations for pcibios_setup()
  sh/PCI: factor out pcibios_setup()
  powerpc/PCI: factor out pcibios_setup()
  parisc/PCI: factor out pcibios_setup()
  MIPS/PCI: adjust section annotations for pcibios_setup()
  MIPS/PCI: factor out pcibios_setup()
  microblaze/PCI: factor out pcibios_setup()
  ia64/PCI: factor out pcibios_setup()
  cris/PCI: factor out pcibios_setup()
  alpha/PCI: factor out pcibios_setup()
  PCI: pull pcibios_setup() up into core
This commit is contained in:
Bjorn Helgaas 2012-07-05 15:31:05 -06:00
commit 85a00dd391
20 changed files with 21 additions and 96 deletions

View File

@ -195,12 +195,6 @@ pcibios_init(void)
subsys_initcall(pcibios_init);
char * __devinit
pcibios_setup(char *str)
{
return str;
}
#ifdef ALPHA_RESTORE_SRM_SETUP
static struct pdev_srm_saved_conf *srm_saved_configs;

View File

@ -6,11 +6,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *b)
{
}
char * __devinit pcibios_setup(char *str)
{
return NULL;
}
void pcibios_set_master(struct pci_dev *dev)
{
u8 lat;

View File

@ -498,15 +498,6 @@ pcibios_align_resource (void *data, const struct resource *res,
return res->start;
}
/*
* PCI BIOS setup, always defaults to SAL interface
*/
char * __init
pcibios_setup (char *str)
{
return str;
}
int
pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)

View File

@ -192,11 +192,6 @@ void pcibios_set_master(struct pci_dev *dev)
/* No special bus mastering setup handling */
}
char __devinit *pcibios_setup(char *str)
{
return str;
}
/*
* Reads the interrupt pin to determine if interrupt is use by card.
* If the interrupt is used, then gets the interrupt line from the

View File

@ -348,9 +348,9 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
vma->vm_end - vma->vm_start, vma->vm_page_prot);
}
char * (*pcibios_plat_setup)(char *str) __devinitdata;
char * (*pcibios_plat_setup)(char *str) __initdata;
char *__devinit pcibios_setup(char *str)
char *__init pcibios_setup(char *str)
{
if (pcibios_plat_setup)
return pcibios_plat_setup(str);

View File

@ -395,17 +395,6 @@ void __init pcibios_init(void)
pci_scan_bus(3, &titan_pci_ops, NULL);
}
/*
* for parsing "pci=" kernel boot arguments.
*/
char *pcibios_setup(char *str)
{
printk(KERN_INFO "rr: pcibios_setup\n");
/* Nothing to do for now. */
return str;
}
unsigned __init int pcibios_assign_all_busses(void)
{
/* We want to use the PCI bus detection done by PMON */

View File

@ -398,9 +398,9 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
return txx9_board_vec->pci_map_irq(dev, slot, pin);
}
char * (*txx9_board_pcibios_setup)(char *str) __devinitdata;
char * (*txx9_board_pcibios_setup)(char *str) __initdata;
char *__devinit txx9_pcibios_setup(char *str)
char *__init txx9_pcibios_setup(char *str)
{
if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str))
return NULL;

View File

@ -139,11 +139,6 @@ void pcibios_fixup_bus(struct pci_bus *bus)
}
char *pcibios_setup(char *str)
{
return str;
}
/*
* Called by pci_set_master() - a driver interface.
*

View File

@ -200,11 +200,6 @@ int pcibios_add_platform_entries(struct pci_dev *pdev)
return device_create_file(&pdev->dev, &dev_attr_devspec);
}
char __devinit *pcibios_setup(char *str)
{
return str;
}
/*
* Reads the interrupt pin to determine if interrupt is use by card.
* If the interrupt is used, then gets the interrupt line from the

View File

@ -23,9 +23,9 @@
* Misconfigurations can be detected through the FPGA via the slot
* resistors to determine card presence. Hotplug remains unsupported.
*/
static unsigned int slot4en __devinitdata;
static unsigned int slot4en __initdata;
char *__devinit pcibios_setup(char *str)
char *__init pcibios_setup(char *str)
{
if (strcmp(str, "slot4en") == 0) {
slot4en = 1;

View File

@ -197,11 +197,6 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq)
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
}
char * __devinit __weak pcibios_setup(char *str)
{
return str;
}
static void __init
pcibios_bus_report_status_early(struct pci_channel *hose,
int top_bus, int current_bus,

View File

@ -91,14 +91,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *pbus)
}
}
/*
* Other archs parse arguments here.
*/
char * __devinit pcibios_setup(char *str)
{
return str;
}
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{

View File

@ -749,11 +749,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
return 0;
}
char * __devinit pcibios_setup(char *str)
{
return str;
}
/* Platform support for /proc/bus/pci/X/Y mmap()s. */
/* If the user uses a host-bridge as the PCI device, he may use

View File

@ -767,14 +767,6 @@ static void watchdog_reset() {
}
#endif
/*
* Other archs parse arguments here.
*/
char * __devinit pcibios_setup(char *str)
{
return str;
}
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{

View File

@ -403,16 +403,6 @@ void pcibios_set_master(struct pci_dev *dev)
/* No special bus mastering setup handling. */
}
/*
* This can be called from the generic PCI layer, but doesn't need to
* do anything.
*/
char __devinit *pcibios_setup(char *str)
{
/* Nothing needs to be done. */
return str;
}
/*
* This is called from the generic Linux layer.
*/

View File

@ -296,7 +296,7 @@ static int __init pci_common_init(void)
}
subsys_initcall(pci_common_init);
char * __devinit pcibios_setup(char *str)
char * __init pcibios_setup(char *str)
{
if (!strcmp(str, "debug")) {
debug_pci = 1;

View File

@ -494,7 +494,7 @@ int __init pcibios_init(void)
return 0;
}
char * __devinit pcibios_setup(char *str)
char * __init pcibios_setup(char *str)
{
if (!strcmp(str, "off")) {
pci_probe = 0;

View File

@ -46,7 +46,6 @@
* pcibios_fixups
* pcibios_align_resource
* pcibios_fixup_bus
* pcibios_setup
* pci_bus_add_device
* pci_mmap_page_range
*/
@ -206,11 +205,6 @@ void __init pcibios_fixup_bus(struct pci_bus *bus)
}
}
char __init *pcibios_setup(char *str)
{
return str;
}
void pcibios_set_master(struct pci_dev *dev)
{
/* No special bus mastering setup handling */

View File

@ -2792,6 +2792,18 @@ static void __pci_set_master(struct pci_dev *dev, bool enable)
dev->is_busmaster = enable;
}
/**
* pcibios_setup - process "pci=" kernel boot arguments
* @str: string used to pass in "pci=" kernel boot arguments
*
* Process kernel boot arguments. This is the default implementation.
* Architecture specific implementations can override this as necessary.
*/
char * __weak __init pcibios_setup(char *str)
{
return str;
}
/**
* pcibios_set_master - enable PCI bus-mastering for device dev
* @dev: the PCI device to enable

View File

@ -678,6 +678,7 @@ extern int no_pci_devices(void);
void pcibios_fixup_bus(struct pci_bus *);
int __must_check pcibios_enable_device(struct pci_dev *, int mask);
/* Architecture specific versions may override this (weak) */
char *pcibios_setup(char *str);
/* Used only when drivers/pci/setup.c is used */