Merge branch 'i2c/for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - the first series of making i2c_device_id optional instead of
   mandatory (in favor of alternatives like of_device_id).

   This involves adding a new probe callback (probe_new) which removes
   some peculiarities I2C had for a long time now. The new probe is
   matching the other subsystems now and the old one will be removed
   once all users are converted. It is expected to take a while but
   there is ongoing interest in that.

 - SMBus Host Notify introduced 4.9 got refactored. They are now using
   interrupts instead of the alert callback which solves multiple
   issues.

 - new drivers for iMX LowPower I2C, Mellanox CPLD and its I2C mux

 - significant refactoring for bcm2835 driver

 - the usual set of driver updates and improvements

* 'i2c/for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (46 commits)
  i2c: fsl-lpi2c: read lpi2c fifo size in probe()
  i2c: octeon: thunderx: Remove double-check after interrupt
  i2c: octeon: thunderx: TWSI software reset in recovery
  i2c: cadence: Allow Cadence I2C to be selected for Cadence Xtensa CPUs
  i2c: sh_mobile: Add per-Generation fallback bindings
  i2c: rcar: Add per-Generation fallback bindings
  i2c: imx-lpi2c: add low power i2c bus driver
  dt-bindings: i2c: imx-lpi2c: add devicetree bindings
  i2c: designware-pcidrv: Add 10bit address feature to medfield/merrifield
  i2c: pxa: Add support for the I2C units found in Armada 3700
  i2c: pxa: Add definition of fast and high speed modes via the regs layout
  dt-bindings: i2c: pxa: Update the documentation for the Armada 3700
  i2c: qup: support SMBus block read
  i2c: qup: add ACPI support
  i2c: designware: Consolidate default functionality bits
  i2c: i2c-mux-gpio: update mux with gpiod_set_array_value_cansleep
  i2c: mux: pca954x: Add ACPI support for pca954x
  i2c: use an IRQ to report Host Notify events, not alert
  i2c: i801: remove SMBNTFDDAT reads as they always seem to return 0
  i2c: i801: use the BIT() macro for FEATURES_* also
  ...
This commit is contained in:
Linus Torvalds 2016-12-15 12:56:35 -08:00
commit 8600b697cd
42 changed files with 2272 additions and 437 deletions

View File

@ -0,0 +1,20 @@
* Freescale Low Power Inter IC (LPI2C) for i.MX
Required properties:
- compatible :
- "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc
- "fsl,imx8dv-lpi2c" for LPI2C compatible with the one integrated on i.MX8DV soc
- reg : address and length of the lpi2c master registers
- interrupt-parent : core interrupt controller
- interrupts : lpi2c interrupt
- clocks : lpi2c clock specifier
Examples:
lpi2c7: lpi2c7@40A50000 {
compatible = "fsl,imx8dv-lpi2c";
reg = <0x40A50000 0x10000>;
interrupt-parent = <&intc>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX7ULP_CLK_LPI2C7>;
};

View File

@ -7,6 +7,7 @@ Required properties :
compatible processor, e.g. pxa168, pxa910, mmp2, mmp3.
For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required
as shown in the example below.
For the Armada 3700, the compatible should be "marvell,armada-3700-i2c".
Recommended properties :

View File

@ -1,17 +1,25 @@
I2C for R-Car platforms
Required properties:
- compatible: Must be one of
"renesas,i2c-rcar"
"renesas,i2c-r8a7778"
"renesas,i2c-r8a7779"
"renesas,i2c-r8a7790"
"renesas,i2c-r8a7791"
"renesas,i2c-r8a7792"
"renesas,i2c-r8a7793"
"renesas,i2c-r8a7794"
"renesas,i2c-r8a7795"
"renesas,i2c-r8a7796"
- compatible:
"renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC.
"renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC.
"renesas,i2c-r8a7790" if the device is a part of a R8A7790 SoC.
"renesas,i2c-r8a7791" if the device is a part of a R8A7791 SoC.
"renesas,i2c-r8a7792" if the device is a part of a R8A7792 SoC.
"renesas,i2c-r8a7793" if the device is a part of a R8A7793 SoC.
"renesas,i2c-r8a7794" if the device is a part of a R8A7794 SoC.
"renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC.
"renesas,i2c-r8a7796" if the device is a part of a R8A7796 SoC.
"renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device.
"renesas,rcar-gen2-i2c" for a generic R-Car Gen2 compatible device.
"renesas,rcar-gen3-i2c" for a generic R-Car Gen3 compatible device.
"renesas,i2c-rcar" (deprecated)
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first followed
by the generic version.
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt specifier.
@ -33,7 +41,7 @@ Examples :
i2c0: i2c@e6508000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,i2c-r8a7791";
compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
reg = <0 0xe6508000 0 0x40>;
interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C0>;

View File

@ -1,8 +1,7 @@
Device tree configuration for Renesas IIC (sh_mobile) driver
Required properties:
- compatible : "renesas,iic-<soctype>". "renesas,rmobile-iic" as fallback
Examples with soctypes are:
- compatible :
- "renesas,iic-r8a73a4" (R-Mobile APE6)
- "renesas,iic-r8a7740" (R-Mobile A1)
- "renesas,iic-r8a7790" (R-Car H2)
@ -12,6 +11,17 @@ Required properties:
- "renesas,iic-r8a7794" (R-Car E2)
- "renesas,iic-r8a7795" (R-Car H3)
- "renesas,iic-sh73a0" (SH-Mobile AG5)
- "renesas,rcar-gen2-iic" (generic R-Car Gen2 compatible device)
- "renesas,rcar-gen3-iic" (generic R-Car Gen3 compatible device)
- "renesas,rmobile-iic" (generic device)
When compatible with a generic R-Car version, nodes
must list the SoC-specific version corresponding to
the platform first followed by the generic R-Car
version.
renesas,rmobile-iic must always follow.
- reg : address start and address range size of device
- interrupts : interrupt of device
- clocks : clock for device
@ -31,7 +41,8 @@ Pinctrl properties might be needed, too. See there.
Example:
iic0: i2c@e6500000 {
compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
"renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x425>;
interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC0>;

View File

@ -0,0 +1,47 @@
Driver i2c-mlxcpld
Author: Michael Shych <michaelsh@mellanox.com>
This is the Mellanox I2C controller logic, implemented in Lattice CPLD
device.
Device supports:
- Master mode.
- One physical bus.
- Polling mode.
This controller is equipped within the next Mellanox systems:
"msx6710", "msx6720", "msb7700", "msn2700", "msx1410", "msn2410", "msb7800",
"msn2740", "msn2100".
The next transaction types are supported:
- Receive Byte/Block.
- Send Byte/Block.
- Read Byte/Block.
- Write Byte/Block.
Registers:
CTRL 0x1 - control reg.
Resets all the registers.
HALF_CYC 0x4 - cycle reg.
Configure the width of I2C SCL half clock cycle (in 4 LPC_CLK
units).
I2C_HOLD 0x5 - hold reg.
OE (output enable) is delayed by value set to this register
(in LPC_CLK units)
CMD 0x6 - command reg.
Bit 0, 0 = write, 1 = read.
Bits [7:1] - the 7bit Address of the I2C device.
It should be written last as it triggers an I2C transaction.
NUM_DATA 0x7 - data size reg.
Number of data bytes to write in read transaction
NUM_ADDR 0x8 - address reg.
Number of address bytes to write in read transaction.
STATUS 0x9 - status reg.
Bit 0 - transaction is completed.
Bit 4 - ACK/NACK.
DATAx 0xa - 0x54 - 68 bytes data buffer regs.
For write transaction address is specified in four first bytes
(DATA1 - DATA4), data starting from DATA4.
For read transactions address is sent in a separate transaction and
specified in the four first bytes (DATA0 - DATA3). Data is read
starting from DATA0.

View File

@ -200,10 +200,14 @@ alerting device's address.
[S] [HostAddr] [Wr] A [DevAddr] A [DataLow] A [DataHigh] A [P]
This is implemented in the following way in the Linux kernel:
* I2C bus drivers which support SMBus Host Notify should call
i2c_setup_smbus_host_notify() to setup SMBus Host Notify support.
* I2C drivers for devices which can trigger SMBus Host Notify should implement
the optional alert() callback.
* I2C bus drivers which support SMBus Host Notify should report
I2C_FUNC_SMBUS_HOST_NOTIFY.
* I2C bus drivers trigger SMBus Host Notify by a call to
i2c_handle_smbus_host_notify().
* I2C drivers for devices which can trigger SMBus Host Notify will have
client->irq assigned to a Host Notify IRQ if noone else specified an other.
There is currently no way to retrieve the data parameter from the client.
Packet Error Checking (PEC)

View File

@ -8023,6 +8023,15 @@ W: http://www.mellanox.com
Q: http://patchwork.ozlabs.org/project/netdev/list/
F: drivers/net/ethernet/mellanox/mlxsw/
MELLANOX MLXCPLD I2C AND MUX DRIVER
M: Vadim Pasternak <vadimp@mellanox.com>
M: Michael Shych <michaelsh@mellanox.com>
L: linux-i2c@vger.kernel.org
S: Supported
F: drivers/i2c/busses/i2c-mlxcpld.c
F: drivers/i2c/muxes/i2c-mux-mlxcpld.c
F: Documentation/i2c/busses/i2c-mlxcpld
MELLANOX MLXCPLD LED DRIVER
M: Vadim Pasternak <vadimp@mellanox.com>
L: linux-leds@vger.kernel.org

View File

@ -7,6 +7,7 @@ menu "I2C support"
config I2C
tristate "I2C support"
select RT_MUTEXES
select IRQ_DOMAIN
---help---
I2C (pronounce: I-squared-C) is a slow serial bus protocol used in
many micro controller applications and developed by Philips. SMBus,

View File

@ -426,7 +426,7 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
config I2C_CADENCE
tristate "Cadence I2C Controller"
depends on ARCH_ZYNQ || ARM64
depends on ARCH_ZYNQ || ARM64 || XTENSA
help
Say yes here to select Cadence I2C Host Controller. This controller is
e.g. used by Xilinx Zynq.
@ -597,6 +597,16 @@ config I2C_IMX
This driver can also be built as a module. If so, the module
will be called i2c-imx.
config I2C_IMX_LPI2C
tristate "IMX Low Power I2C interface"
depends on ARCH_MXC || COMPILE_TEST
help
Say Y here if you want to use the Low Power IIC bus controller
on the Freescale i.MX processors.
This driver can also be built as a module. If so, the module
will be called i2c-imx-lpi2c.
config I2C_IOP3XX
tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX
@ -763,7 +773,7 @@ config I2C_PUV3
config I2C_PXA
tristate "Intel PXA2XX I2C adapter"
depends on ARCH_PXA || ARCH_MMP || (X86_32 && PCI && OF)
depends on ARCH_PXA || ARCH_MMP || ARCH_MVEBU || (X86_32 && PCI && OF)
help
If you have devices in the PXA I2C bus, say yes to this option.
This driver can also be built as a module. If so, the module
@ -1150,6 +1160,17 @@ config I2C_ELEKTOR
This support is also available as a module. If so, the module
will be called i2c-elektor.
config I2C_MLXCPLD
tristate "Mellanox I2C driver"
depends on X86_64
help
This exposes the Mellanox platform I2C busses to the linux I2C layer
for X86 based systems.
Controller is implemented as CPLD logic.
This driver can also be built as a module. If so, the module will be
called as i2c-mlxcpld.
config I2C_PCA_ISA
tristate "PCA9564/PCA9665 on an ISA bus"
depends on ISA

View File

@ -56,6 +56,7 @@ obj-$(CONFIG_I2C_HIX5HD2) += i2c-hix5hd2.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IMG) += i2c-img-scb.o
obj-$(CONFIG_I2C_IMX) += i2c-imx.o
obj-$(CONFIG_I2C_IMX_LPI2C) += i2c-imx-lpi2c.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o
obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o
@ -116,6 +117,7 @@ obj-$(CONFIG_I2C_BCM_KONA) += i2c-bcm-kona.o
obj-$(CONFIG_I2C_BRCMSTB) += i2c-brcmstb.o
obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += i2c-cros-ec-tunnel.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_MLXCPLD) += i2c-mlxcpld.o
obj-$(CONFIG_I2C_OPAL) += i2c-opal.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o

View File

@ -489,7 +489,7 @@ static const struct i2c_algorithm axxia_i2c_algo = {
.functionality = axxia_i2c_func,
};
static struct i2c_adapter_quirks axxia_i2c_quirks = {
static const struct i2c_adapter_quirks axxia_i2c_quirks = {
.max_read_len = 255,
.max_write_len = 255,
};

View File

@ -395,7 +395,7 @@ static const struct i2c_algorithm bcm_iproc_algo = {
.functionality = bcm_iproc_i2c_functionality,
};
static struct i2c_adapter_quirks bcm_iproc_i2c_quirks = {
static const struct i2c_adapter_quirks bcm_iproc_i2c_quirks = {
/* need to reserve one byte in the FIFO for the slave address */
.max_read_len = M_TX_RX_FIFO_SIZE - 1,
};

View File

@ -50,20 +50,19 @@
#define BCM2835_I2C_S_CLKT BIT(9)
#define BCM2835_I2C_S_LEN BIT(10) /* Fake bit for SW error reporting */
#define BCM2835_I2C_BITMSK_S 0x03FF
#define BCM2835_I2C_CDIV_MIN 0x0002
#define BCM2835_I2C_CDIV_MAX 0xFFFE
#define BCM2835_I2C_TIMEOUT (msecs_to_jiffies(1000))
struct bcm2835_i2c_dev {
struct device *dev;
void __iomem *regs;
struct clk *clk;
int irq;
u32 bus_clk_rate;
struct i2c_adapter adapter;
struct completion completion;
struct i2c_msg *curr_msg;
int num_msgs;
u32 msg_err;
u8 *msg_buf;
size_t msg_buf_remaining;
@ -80,6 +79,30 @@ static inline u32 bcm2835_i2c_readl(struct bcm2835_i2c_dev *i2c_dev, u32 reg)
return readl(i2c_dev->regs + reg);
}
static int bcm2835_i2c_set_divider(struct bcm2835_i2c_dev *i2c_dev)
{
u32 divider;
divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk),
i2c_dev->bus_clk_rate);
/*
* Per the datasheet, the register is always interpreted as an even
* number, by rounding down. In other words, the LSB is ignored. So,
* if the LSB is set, increment the divider to avoid any issue.
*/
if (divider & 1)
divider++;
if ((divider < BCM2835_I2C_CDIV_MIN) ||
(divider > BCM2835_I2C_CDIV_MAX)) {
dev_err_ratelimited(i2c_dev->dev, "Invalid clock-frequency\n");
return -EINVAL;
}
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider);
return 0;
}
static void bcm2835_fill_txfifo(struct bcm2835_i2c_dev *i2c_dev)
{
u32 val;
@ -110,106 +133,159 @@ static void bcm2835_drain_rxfifo(struct bcm2835_i2c_dev *i2c_dev)
}
}
/*
* Repeated Start Condition (Sr)
* The BCM2835 ARM Peripherals datasheet mentions a way to trigger a Sr when it
* talks about reading from a slave with 10 bit address. This is achieved by
* issuing a write, poll the I2CS.TA flag and wait for it to be set, and then
* issue a read.
* A comment in https://github.com/raspberrypi/linux/issues/254 shows how the
* firmware actually does it using polling and says that it's a workaround for
* a problem in the state machine.
* It turns out that it is possible to use the TXW interrupt to know when the
* transfer is active, provided the FIFO has not been prefilled.
*/
static void bcm2835_i2c_start_transfer(struct bcm2835_i2c_dev *i2c_dev)
{
u32 c = BCM2835_I2C_C_ST | BCM2835_I2C_C_I2CEN;
struct i2c_msg *msg = i2c_dev->curr_msg;
bool last_msg = (i2c_dev->num_msgs == 1);
if (!i2c_dev->num_msgs)
return;
i2c_dev->num_msgs--;
i2c_dev->msg_buf = msg->buf;
i2c_dev->msg_buf_remaining = msg->len;
if (msg->flags & I2C_M_RD)
c |= BCM2835_I2C_C_READ | BCM2835_I2C_C_INTR;
else
c |= BCM2835_I2C_C_INTT;
if (last_msg)
c |= BCM2835_I2C_C_INTD;
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_A, msg->addr);
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DLEN, msg->len);
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c);
}
/*
* Note about I2C_C_CLEAR on error:
* The I2C_C_CLEAR on errors will take some time to resolve -- if you were in
* non-idle state and I2C_C_READ, it sets an abort_rx flag and runs through
* the state machine to send a NACK and a STOP. Since we're setting CLEAR
* without I2CEN, that NACK will be hanging around queued up for next time
* we start the engine.
*/
static irqreturn_t bcm2835_i2c_isr(int this_irq, void *data)
{
struct bcm2835_i2c_dev *i2c_dev = data;
u32 val, err;
val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
val &= BCM2835_I2C_BITMSK_S;
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_S, val);
err = val & (BCM2835_I2C_S_CLKT | BCM2835_I2C_S_ERR);
if (err) {
i2c_dev->msg_err = err;
complete(&i2c_dev->completion);
return IRQ_HANDLED;
}
if (val & BCM2835_I2C_S_RXD) {
bcm2835_drain_rxfifo(i2c_dev);
if (!(val & BCM2835_I2C_S_DONE))
return IRQ_HANDLED;
goto complete;
}
if (val & BCM2835_I2C_S_DONE) {
if (i2c_dev->msg_buf_remaining)
if (i2c_dev->curr_msg->flags & I2C_M_RD) {
bcm2835_drain_rxfifo(i2c_dev);
val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
}
if ((val & BCM2835_I2C_S_RXD) || i2c_dev->msg_buf_remaining)
i2c_dev->msg_err = BCM2835_I2C_S_LEN;
else
i2c_dev->msg_err = 0;
complete(&i2c_dev->completion);
goto complete;
}
if (val & BCM2835_I2C_S_TXW) {
if (!i2c_dev->msg_buf_remaining) {
i2c_dev->msg_err = val | BCM2835_I2C_S_LEN;
goto complete;
}
bcm2835_fill_txfifo(i2c_dev);
if (i2c_dev->num_msgs && !i2c_dev->msg_buf_remaining) {
i2c_dev->curr_msg++;
bcm2835_i2c_start_transfer(i2c_dev);
}
return IRQ_HANDLED;
}
if (val & BCM2835_I2C_S_TXD) {
bcm2835_fill_txfifo(i2c_dev);
if (val & BCM2835_I2C_S_RXR) {
if (!i2c_dev->msg_buf_remaining) {
i2c_dev->msg_err = val | BCM2835_I2C_S_LEN;
goto complete;
}
bcm2835_drain_rxfifo(i2c_dev);
return IRQ_HANDLED;
}
return IRQ_NONE;
}
static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev,
struct i2c_msg *msg)
{
u32 c;
unsigned long time_left;
i2c_dev->msg_buf = msg->buf;
i2c_dev->msg_buf_remaining = msg->len;
reinit_completion(&i2c_dev->completion);
complete:
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR);
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_S, BCM2835_I2C_S_CLKT |
BCM2835_I2C_S_ERR | BCM2835_I2C_S_DONE);
complete(&i2c_dev->completion);
if (msg->flags & I2C_M_RD) {
c = BCM2835_I2C_C_READ | BCM2835_I2C_C_INTR;
} else {
c = BCM2835_I2C_C_INTT;
bcm2835_fill_txfifo(i2c_dev);
}
c |= BCM2835_I2C_C_ST | BCM2835_I2C_C_INTD | BCM2835_I2C_C_I2CEN;
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_A, msg->addr);
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DLEN, msg->len);
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c);
time_left = wait_for_completion_timeout(&i2c_dev->completion,
BCM2835_I2C_TIMEOUT);
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR);
if (!time_left) {
dev_err(i2c_dev->dev, "i2c transfer timed out\n");
return -ETIMEDOUT;
}
if (likely(!i2c_dev->msg_err))
return 0;
if ((i2c_dev->msg_err & BCM2835_I2C_S_ERR) &&
(msg->flags & I2C_M_IGNORE_NAK))
return 0;
dev_err(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err);
if (i2c_dev->msg_err & BCM2835_I2C_S_ERR)
return -EREMOTEIO;
else
return -EIO;
return IRQ_HANDLED;
}
static int bcm2835_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
int num)
{
struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
int i;
int ret = 0;
unsigned long time_left;
int i, ret;
for (i = 0; i < num; i++) {
ret = bcm2835_i2c_xfer_msg(i2c_dev, &msgs[i]);
if (ret)
break;
for (i = 0; i < (num - 1); i++)
if (msgs[i].flags & I2C_M_RD) {
dev_warn_once(i2c_dev->dev,
"only one read message supported, has to be last\n");
return -EOPNOTSUPP;
}
ret = bcm2835_i2c_set_divider(i2c_dev);
if (ret)
return ret;
i2c_dev->curr_msg = msgs;
i2c_dev->num_msgs = num;
reinit_completion(&i2c_dev->completion);
bcm2835_i2c_start_transfer(i2c_dev);
time_left = wait_for_completion_timeout(&i2c_dev->completion,
adap->timeout);
if (!time_left) {
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C,
BCM2835_I2C_C_CLEAR);
dev_err(i2c_dev->dev, "i2c transfer timed out\n");
return -ETIMEDOUT;
}
return ret ?: i;
if (!i2c_dev->msg_err)
return num;
dev_dbg(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err);
if (i2c_dev->msg_err & BCM2835_I2C_S_ERR)
return -EREMOTEIO;
return -EIO;
}
static u32 bcm2835_i2c_func(struct i2c_adapter *adap)
@ -235,7 +311,6 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
{
struct bcm2835_i2c_dev *i2c_dev;
struct resource *mem, *irq;
u32 bus_clk_rate, divider;
int ret;
struct i2c_adapter *adap;
@ -259,28 +334,13 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
}
ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
&bus_clk_rate);
&i2c_dev->bus_clk_rate);
if (ret < 0) {
dev_warn(&pdev->dev,
"Could not read clock-frequency property\n");
bus_clk_rate = 100000;
i2c_dev->bus_clk_rate = 100000;
}
divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk), bus_clk_rate);
/*
* Per the datasheet, the register is always interpreted as an even
* number, by rounding down. In other words, the LSB is ignored. So,
* if the LSB is set, increment the divider to avoid any issue.
*/
if (divider & 1)
divider++;
if ((divider < BCM2835_I2C_CDIV_MIN) ||
(divider > BCM2835_I2C_CDIV_MAX)) {
dev_err(&pdev->dev, "Invalid clock-frequency\n");
return -ENODEV;
}
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider);
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!irq) {
dev_err(&pdev->dev, "No IRQ resource\n");

View File

@ -536,6 +536,8 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
intr_mask = DW_IC_INTR_DEFAULT_MASK;
for (; dev->msg_write_idx < dev->msgs_num; dev->msg_write_idx++) {
u32 flags = msgs[dev->msg_write_idx].flags;
/*
* if target address has changed, we need to
* reprogram the target address in the i2c
@ -581,8 +583,15 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
* detected from the registers so we set it always
* when writing/reading the last byte.
*/
/*
* i2c-core.c always sets the buffer length of
* I2C_FUNC_SMBUS_BLOCK_DATA to 1. The length will
* be adjusted when receiving the first byte.
* Thus we can't stop the transaction here.
*/
if (dev->msg_write_idx == dev->msgs_num - 1 &&
buf_len == 1)
buf_len == 1 && !(flags & I2C_M_RECV_LEN))
cmd |= BIT(9);
if (need_restart) {
@ -607,7 +616,12 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
dev->tx_buf = buf;
dev->tx_buf_len = buf_len;
if (buf_len > 0) {
/*
* Because we don't know the buffer length in the
* I2C_FUNC_SMBUS_BLOCK_DATA case, we can't stop
* the transaction here.
*/
if (buf_len > 0 || flags & I2C_M_RECV_LEN) {
/* more bytes to be written */
dev->status |= STATUS_WRITE_IN_PROGRESS;
break;
@ -628,6 +642,24 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
dw_writel(dev, intr_mask, DW_IC_INTR_MASK);
}
static u8
i2c_dw_recv_len(struct dw_i2c_dev *dev, u8 len)
{
struct i2c_msg *msgs = dev->msgs;
u32 flags = msgs[dev->msg_read_idx].flags;
/*
* Adjust the buffer length and mask the flag
* after receiving the first byte.
*/
len += (flags & I2C_CLIENT_PEC) ? 2 : 1;
dev->tx_buf_len = len - min_t(u8, len, dev->rx_outstanding);
msgs[dev->msg_read_idx].len = len;
msgs[dev->msg_read_idx].flags &= ~I2C_M_RECV_LEN;
return len;
}
static void
i2c_dw_read(struct dw_i2c_dev *dev)
{
@ -652,7 +684,15 @@ i2c_dw_read(struct dw_i2c_dev *dev)
rx_valid = dw_readl(dev, DW_IC_RXFLR);
for (; len > 0 && rx_valid > 0; len--, rx_valid--) {
*buf++ = dw_readl(dev, DW_IC_DATA_CMD);
u32 flags = msgs[dev->msg_read_idx].flags;
*buf = dw_readl(dev, DW_IC_DATA_CMD);
/* Ensure length byte is a valid value */
if (flags & I2C_M_RECV_LEN &&
*buf <= I2C_SMBUS_BLOCK_MAX && *buf > 0) {
len = i2c_dw_recv_len(dev, *buf);
}
buf++;
dev->rx_outstanding--;
}

View File

@ -22,6 +22,14 @@
*
*/
#include <linux/i2c.h>
#define DW_IC_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C | \
I2C_FUNC_SMBUS_BYTE | \
I2C_FUNC_SMBUS_BYTE_DATA | \
I2C_FUNC_SMBUS_WORD_DATA | \
I2C_FUNC_SMBUS_BLOCK_DATA | \
I2C_FUNC_SMBUS_I2C_BLOCK)
#define DW_IC_CON_MASTER 0x1
#define DW_IC_CON_SPEED_STD 0x2

View File

@ -71,12 +71,6 @@ struct dw_pci_controller {
DW_IC_CON_SLAVE_DISABLE | \
DW_IC_CON_RESTART_EN)
#define DW_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C | \
I2C_FUNC_SMBUS_BYTE | \
I2C_FUNC_SMBUS_BYTE_DATA | \
I2C_FUNC_SMBUS_WORD_DATA | \
I2C_FUNC_SMBUS_I2C_BLOCK)
/* Merrifield HCNT/LCNT/SDA hold time */
static struct dw_scl_sda_cfg mrfld_config = {
.ss_hcnt = 0x2f8,
@ -147,6 +141,7 @@ static struct dw_pci_controller dw_pci_controllers[] = {
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.functionality = I2C_FUNC_10BIT_ADDR,
.clk_khz = 25000,
.setup = mfld_setup,
},
@ -155,6 +150,7 @@ static struct dw_pci_controller dw_pci_controllers[] = {
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 64,
.rx_fifo_depth = 64,
.functionality = I2C_FUNC_10BIT_ADDR,
.scl_sda_cfg = &mrfld_config,
.setup = mrfld_setup,
},
@ -249,7 +245,7 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
}
dev->functionality = controller->functionality |
DW_DEFAULT_FUNCTIONALITY;
DW_IC_DEFAULT_FUNCTIONALITY;
dev->master_cfg = controller->bus_cfg;
if (controller->scl_sda_cfg) {

View File

@ -176,9 +176,6 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
dev->irq = irq;
platform_set_drvdata(pdev, dev);
/* fast mode by default because of legacy reasons */
dev->clk_freq = 400000;
if (pdata) {
dev->clk_freq = pdata->i2c_scl_freq;
} else {
@ -193,8 +190,16 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
}
acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev);
if (acpi_speed)
dev->clk_freq = acpi_speed;
/*
* Find bus speed from the "clock-frequency" device property, ACPI
* or by using fast mode if neither is set.
*/
if (acpi_speed && dev->clk_freq)
dev->clk_freq = min(dev->clk_freq, acpi_speed);
else if (acpi_speed || dev->clk_freq)
dev->clk_freq = max(dev->clk_freq, acpi_speed);
else
dev->clk_freq = 400000;
if (has_acpi_companion(&pdev->dev))
dw_i2c_acpi_configure(pdev);
@ -214,13 +219,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
if (r)
return r;
dev->functionality =
I2C_FUNC_I2C |
I2C_FUNC_10BIT_ADDR |
I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_I2C_BLOCK;
dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
DW_IC_CON_RESTART_EN;

View File

@ -182,7 +182,7 @@ static const struct i2c_algorithm dln2_i2c_usb_algorithm = {
.functionality = dln2_i2c_func,
};
static struct i2c_adapter_quirks dln2_i2c_quirks = {
static const struct i2c_adapter_quirks dln2_i2c_quirks = {
.max_read_len = DLN2_I2C_MAX_XFER_SIZE,
.max_write_len = DLN2_I2C_MAX_XFER_SIZE,
};

View File

@ -118,7 +118,6 @@
#define SMBSLVSTS(p) (16 + (p)->smba) /* ICH3 and later */
#define SMBSLVCMD(p) (17 + (p)->smba) /* ICH3 and later */
#define SMBNTFDADD(p) (20 + (p)->smba) /* ICH3 and later */
#define SMBNTFDDAT(p) (22 + (p)->smba) /* ICH3 and later */
/* PCI Address Constants */
#define SMBBAR 4
@ -137,27 +136,27 @@
#define SBREG_SMBCTRL 0xc6000c
/* Host status bits for SMBPCISTS */
#define SMBPCISTS_INTS 0x08
#define SMBPCISTS_INTS BIT(3)
/* Control bits for SMBPCICTL */
#define SMBPCICTL_INTDIS 0x0400
#define SMBPCICTL_INTDIS BIT(10)
/* Host configuration bits for SMBHSTCFG */
#define SMBHSTCFG_HST_EN 1
#define SMBHSTCFG_SMB_SMI_EN 2
#define SMBHSTCFG_I2C_EN 4
#define SMBHSTCFG_SPD_WD 0x10
#define SMBHSTCFG_HST_EN BIT(0)
#define SMBHSTCFG_SMB_SMI_EN BIT(1)
#define SMBHSTCFG_I2C_EN BIT(2)
#define SMBHSTCFG_SPD_WD BIT(4)
/* TCO configuration bits for TCOCTL */
#define TCOCTL_EN 0x0100
#define TCOCTL_EN BIT(8)
/* Auxiliary status register bits, ICH4+ only */
#define SMBAUXSTS_CRCE 1
#define SMBAUXSTS_STCO 2
#define SMBAUXSTS_CRCE BIT(0)
#define SMBAUXSTS_STCO BIT(1)
/* Auxiliary control register bits, ICH4+ only */
#define SMBAUXCTL_CRC 1
#define SMBAUXCTL_E32B 2
#define SMBAUXCTL_CRC BIT(0)
#define SMBAUXCTL_E32B BIT(1)
/* Other settings */
#define MAX_RETRIES 400
@ -172,27 +171,27 @@
#define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */
/* I801 Host Control register bits */
#define SMBHSTCNT_INTREN 0x01
#define SMBHSTCNT_KILL 0x02
#define SMBHSTCNT_LAST_BYTE 0x20
#define SMBHSTCNT_START 0x40
#define SMBHSTCNT_PEC_EN 0x80 /* ICH3 and later */
#define SMBHSTCNT_INTREN BIT(0)
#define SMBHSTCNT_KILL BIT(1)
#define SMBHSTCNT_LAST_BYTE BIT(5)
#define SMBHSTCNT_START BIT(6)
#define SMBHSTCNT_PEC_EN BIT(7) /* ICH3 and later */
/* I801 Hosts Status register bits */
#define SMBHSTSTS_BYTE_DONE 0x80
#define SMBHSTSTS_INUSE_STS 0x40
#define SMBHSTSTS_SMBALERT_STS 0x20
#define SMBHSTSTS_FAILED 0x10
#define SMBHSTSTS_BUS_ERR 0x08
#define SMBHSTSTS_DEV_ERR 0x04
#define SMBHSTSTS_INTR 0x02
#define SMBHSTSTS_HOST_BUSY 0x01
#define SMBHSTSTS_BYTE_DONE BIT(7)
#define SMBHSTSTS_INUSE_STS BIT(6)
#define SMBHSTSTS_SMBALERT_STS BIT(5)
#define SMBHSTSTS_FAILED BIT(4)
#define SMBHSTSTS_BUS_ERR BIT(3)
#define SMBHSTSTS_DEV_ERR BIT(2)
#define SMBHSTSTS_INTR BIT(1)
#define SMBHSTSTS_HOST_BUSY BIT(0)
/* Host Notify Status registers bits */
#define SMBSLVSTS_HST_NTFY_STS 1
/* Host Notify Status register bits */
#define SMBSLVSTS_HST_NTFY_STS BIT(0)
/* Host Notify Command registers bits */
#define SMBSLVCMD_HST_NTFY_INTREN 0x01
/* Host Notify Command register bits */
#define SMBSLVCMD_HST_NTFY_INTREN BIT(0)
#define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \
SMBHSTSTS_DEV_ERR)
@ -243,6 +242,7 @@ struct i801_priv {
struct i2c_adapter adapter;
unsigned long smba;
unsigned char original_hstcfg;
unsigned char original_slvcmd;
struct pci_dev *pci_dev;
unsigned int features;
@ -269,20 +269,17 @@ struct i801_priv {
*/
bool acpi_reserved;
struct mutex acpi_lock;
struct smbus_host_notify *host_notify;
};
#define SMBHSTNTFY_SIZE 8
#define FEATURE_SMBUS_PEC (1 << 0)
#define FEATURE_BLOCK_BUFFER (1 << 1)
#define FEATURE_BLOCK_PROC (1 << 2)
#define FEATURE_I2C_BLOCK_READ (1 << 3)
#define FEATURE_IRQ (1 << 4)
#define FEATURE_HOST_NOTIFY (1 << 5)
#define FEATURE_SMBUS_PEC BIT(0)
#define FEATURE_BLOCK_BUFFER BIT(1)
#define FEATURE_BLOCK_PROC BIT(2)
#define FEATURE_I2C_BLOCK_READ BIT(3)
#define FEATURE_IRQ BIT(4)
#define FEATURE_HOST_NOTIFY BIT(5)
/* Not really a feature, but it's convenient to handle it as such */
#define FEATURE_IDF (1 << 15)
#define FEATURE_TCO (1 << 16)
#define FEATURE_IDF BIT(15)
#define FEATURE_TCO BIT(16)
static const char *i801_feature_names[] = {
"SMBus PEC",
@ -582,12 +579,15 @@ static void i801_isr_byte_done(struct i801_priv *priv)
static irqreturn_t i801_host_notify_isr(struct i801_priv *priv)
{
unsigned short addr;
unsigned int data;
addr = inb_p(SMBNTFDADD(priv)) >> 1;
data = inw_p(SMBNTFDDAT(priv));
i2c_handle_smbus_host_notify(priv->host_notify, addr, data);
/*
* With the tested platforms, reading SMBNTFDDAT (22 + (p)->smba)
* always returns 0. Our current implementation doesn't provide
* data, so we just ignore it.
*/
i2c_handle_smbus_host_notify(&priv->adapter, addr);
/* clear Host Notify bit and return */
outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
@ -950,23 +950,29 @@ static u32 i801_func(struct i2c_adapter *adapter)
I2C_FUNC_SMBUS_HOST_NOTIFY : 0);
}
static int i801_enable_host_notify(struct i2c_adapter *adapter)
static void i801_enable_host_notify(struct i2c_adapter *adapter)
{
struct i801_priv *priv = i2c_get_adapdata(adapter);
if (!(priv->features & FEATURE_HOST_NOTIFY))
return -ENOTSUPP;
return;
if (!priv->host_notify)
priv->host_notify = i2c_setup_smbus_host_notify(adapter);
if (!priv->host_notify)
return -ENOMEM;
priv->original_slvcmd = inb_p(SMBSLVCMD(priv));
if (!(SMBSLVCMD_HST_NTFY_INTREN & priv->original_slvcmd))
outb_p(SMBSLVCMD_HST_NTFY_INTREN | priv->original_slvcmd,
SMBSLVCMD(priv));
outb_p(SMBSLVCMD_HST_NTFY_INTREN, SMBSLVCMD(priv));
/* clear Host Notify bit to allow a new notification */
outb_p(SMBSLVSTS_HST_NTFY_STS, SMBSLVSTS(priv));
}
return 0;
static void i801_disable_host_notify(struct i801_priv *priv)
{
if (!(priv->features & FEATURE_HOST_NOTIFY))
return;
outb_p(priv->original_slvcmd, SMBSLVCMD(priv));
}
static const struct i2c_algorithm smbus_algorithm = {
@ -1633,14 +1639,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
return err;
}
/*
* Enable Host Notify for chips that supports it.
* It is done after i2c_add_adapter() so that we are sure the work queue
* is not used if i2c_add_adapter() fails.
*/
err = i801_enable_host_notify(&priv->adapter);
if (err && err != -ENOTSUPP)
dev_warn(&dev->dev, "Unable to enable SMBus Host Notify\n");
i801_enable_host_notify(&priv->adapter);
i801_probe_optional_slaves(priv);
/* We ignore errors - multiplexing is optional */
@ -1663,6 +1662,7 @@ static void i801_remove(struct pci_dev *dev)
pm_runtime_forbid(&dev->dev);
pm_runtime_get_noresume(&dev->dev);
i801_disable_host_notify(priv);
i801_del_mux(priv);
i2c_del_adapter(&priv->adapter);
i801_acpi_remove(priv);
@ -1690,11 +1690,8 @@ static int i801_resume(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct i801_priv *priv = pci_get_drvdata(pci_dev);
int err;
err = i801_enable_host_notify(&priv->adapter);
if (err && err != -ENOTSUPP)
dev_warn(dev, "Unable to enable SMBus Host Notify\n");
i801_enable_host_notify(&priv->adapter);
return 0;
}

View File

@ -0,0 +1,652 @@
/*
* This is i.MX low power i2c controller driver.
*
* Copyright 2016 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/slab.h>
#define DRIVER_NAME "imx-lpi2c"
#define LPI2C_PARAM 0x04 /* i2c RX/TX FIFO size */
#define LPI2C_MCR 0x10 /* i2c contrl register */
#define LPI2C_MSR 0x14 /* i2c status register */
#define LPI2C_MIER 0x18 /* i2c interrupt enable */
#define LPI2C_MCFGR0 0x20 /* i2c master configuration */
#define LPI2C_MCFGR1 0x24 /* i2c master configuration */
#define LPI2C_MCFGR2 0x28 /* i2c master configuration */
#define LPI2C_MCFGR3 0x2C /* i2c master configuration */
#define LPI2C_MCCR0 0x48 /* i2c master clk configuration */
#define LPI2C_MCCR1 0x50 /* i2c master clk configuration */
#define LPI2C_MFCR 0x58 /* i2c master FIFO control */
#define LPI2C_MFSR 0x5C /* i2c master FIFO status */
#define LPI2C_MTDR 0x60 /* i2c master TX data register */
#define LPI2C_MRDR 0x70 /* i2c master RX data register */
/* i2c command */
#define TRAN_DATA 0X00
#define RECV_DATA 0X01
#define GEN_STOP 0X02
#define RECV_DISCARD 0X03
#define GEN_START 0X04
#define START_NACK 0X05
#define START_HIGH 0X06
#define START_HIGH_NACK 0X07
#define MCR_MEN BIT(0)
#define MCR_RST BIT(1)
#define MCR_DOZEN BIT(2)
#define MCR_DBGEN BIT(3)
#define MCR_RTF BIT(8)
#define MCR_RRF BIT(9)
#define MSR_TDF BIT(0)
#define MSR_RDF BIT(1)
#define MSR_SDF BIT(9)
#define MSR_NDF BIT(10)
#define MSR_ALF BIT(11)
#define MSR_MBF BIT(24)
#define MSR_BBF BIT(25)
#define MIER_TDIE BIT(0)
#define MIER_RDIE BIT(1)
#define MIER_SDIE BIT(9)
#define MIER_NDIE BIT(10)
#define MCFGR1_AUTOSTOP BIT(8)
#define MCFGR1_IGNACK BIT(9)
#define MRDR_RXEMPTY BIT(14)
#define I2C_CLK_RATIO 2
#define CHUNK_DATA 256
#define LPI2C_DEFAULT_RATE 100000
#define STARDARD_MAX_BITRATE 400000
#define FAST_MAX_BITRATE 1000000
#define FAST_PLUS_MAX_BITRATE 3400000
#define HIGHSPEED_MAX_BITRATE 5000000
enum lpi2c_imx_mode {
STANDARD, /* 100+Kbps */
FAST, /* 400+Kbps */
FAST_PLUS, /* 1.0+Mbps */
HS, /* 3.4+Mbps */
ULTRA_FAST, /* 5.0+Mbps */
};
enum lpi2c_imx_pincfg {
TWO_PIN_OD,
TWO_PIN_OO,
TWO_PIN_PP,
FOUR_PIN_PP,
};
struct lpi2c_imx_struct {
struct i2c_adapter adapter;
struct clk *clk;
void __iomem *base;
__u8 *rx_buf;
__u8 *tx_buf;
struct completion complete;
unsigned int msglen;
unsigned int delivered;
unsigned int block_data;
unsigned int bitrate;
unsigned int txfifosize;
unsigned int rxfifosize;
enum lpi2c_imx_mode mode;
};
static void lpi2c_imx_intctrl(struct lpi2c_imx_struct *lpi2c_imx,
unsigned int enable)
{
writel(enable, lpi2c_imx->base + LPI2C_MIER);
}
static int lpi2c_imx_bus_busy(struct lpi2c_imx_struct *lpi2c_imx)
{
unsigned long orig_jiffies = jiffies;
unsigned int temp;
while (1) {
temp = readl(lpi2c_imx->base + LPI2C_MSR);
/* check for arbitration lost, clear if set */
if (temp & MSR_ALF) {
writel(temp, lpi2c_imx->base + LPI2C_MSR);
return -EAGAIN;
}
if (temp & (MSR_BBF | MSR_MBF))
break;
if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
dev_dbg(&lpi2c_imx->adapter.dev, "bus not work\n");
return -ETIMEDOUT;
}
schedule();
}
return 0;
}
static void lpi2c_imx_set_mode(struct lpi2c_imx_struct *lpi2c_imx)
{
unsigned int bitrate = lpi2c_imx->bitrate;
enum lpi2c_imx_mode mode;
if (bitrate < STARDARD_MAX_BITRATE)
mode = STANDARD;
else if (bitrate < FAST_MAX_BITRATE)
mode = FAST;
else if (bitrate < FAST_PLUS_MAX_BITRATE)
mode = FAST_PLUS;
else if (bitrate < HIGHSPEED_MAX_BITRATE)
mode = HS;
else
mode = ULTRA_FAST;
lpi2c_imx->mode = mode;
}
static int lpi2c_imx_start(struct lpi2c_imx_struct *lpi2c_imx,
struct i2c_msg *msgs)
{
unsigned int temp;
u8 read;
temp = readl(lpi2c_imx->base + LPI2C_MCR);
temp |= MCR_RRF | MCR_RTF;
writel(temp, lpi2c_imx->base + LPI2C_MCR);
writel(0x7f00, lpi2c_imx->base + LPI2C_MSR);
read = msgs->flags & I2C_M_RD;
temp = (msgs->addr << 1 | read) | (GEN_START << 8);
writel(temp, lpi2c_imx->base + LPI2C_MTDR);
return lpi2c_imx_bus_busy(lpi2c_imx);
}
static void lpi2c_imx_stop(struct lpi2c_imx_struct *lpi2c_imx)
{
unsigned long orig_jiffies = jiffies;
unsigned int temp;
writel(GEN_STOP << 8, lpi2c_imx->base + LPI2C_MTDR);
do {
temp = readl(lpi2c_imx->base + LPI2C_MSR);
if (temp & MSR_SDF)
break;
if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
dev_dbg(&lpi2c_imx->adapter.dev, "stop timeout\n");
break;
}
schedule();
} while (1);
}
/* CLKLO = I2C_CLK_RATIO * CLKHI, SETHOLD = CLKHI, DATAVD = CLKHI/2 */
static int lpi2c_imx_config(struct lpi2c_imx_struct *lpi2c_imx)
{
u8 prescale, filt, sethold, clkhi, clklo, datavd;
unsigned int clk_rate, clk_cycle;
enum lpi2c_imx_pincfg pincfg;
unsigned int temp;
lpi2c_imx_set_mode(lpi2c_imx);
clk_rate = clk_get_rate(lpi2c_imx->clk);
if (lpi2c_imx->mode == HS || lpi2c_imx->mode == ULTRA_FAST)
filt = 0;
else
filt = 2;
for (prescale = 0; prescale <= 7; prescale++) {
clk_cycle = clk_rate / ((1 << prescale) * lpi2c_imx->bitrate)
- 3 - (filt >> 1);
clkhi = (clk_cycle + I2C_CLK_RATIO) / (I2C_CLK_RATIO + 1);
clklo = clk_cycle - clkhi;
if (clklo < 64)
break;
}
if (prescale > 7)
return -EINVAL;
/* set MCFGR1: PINCFG, PRESCALE, IGNACK */
if (lpi2c_imx->mode == ULTRA_FAST)
pincfg = TWO_PIN_OO;
else
pincfg = TWO_PIN_OD;
temp = prescale | pincfg << 24;
if (lpi2c_imx->mode == ULTRA_FAST)
temp |= MCFGR1_IGNACK;
writel(temp, lpi2c_imx->base + LPI2C_MCFGR1);
/* set MCFGR2: FILTSDA, FILTSCL */
temp = (filt << 16) | (filt << 24);
writel(temp, lpi2c_imx->base + LPI2C_MCFGR2);
/* set MCCR: DATAVD, SETHOLD, CLKHI, CLKLO */
sethold = clkhi;
datavd = clkhi >> 1;
temp = datavd << 24 | sethold << 16 | clkhi << 8 | clklo;
if (lpi2c_imx->mode == HS)
writel(temp, lpi2c_imx->base + LPI2C_MCCR1);
else
writel(temp, lpi2c_imx->base + LPI2C_MCCR0);
return 0;
}
static int lpi2c_imx_master_enable(struct lpi2c_imx_struct *lpi2c_imx)
{
unsigned int temp;
int ret;
ret = clk_enable(lpi2c_imx->clk);
if (ret)
return ret;
temp = MCR_RST;
writel(temp, lpi2c_imx->base + LPI2C_MCR);
writel(0, lpi2c_imx->base + LPI2C_MCR);
ret = lpi2c_imx_config(lpi2c_imx);
if (ret)
goto clk_disable;
temp = readl(lpi2c_imx->base + LPI2C_MCR);
temp |= MCR_MEN;
writel(temp, lpi2c_imx->base + LPI2C_MCR);
return 0;
clk_disable:
clk_disable(lpi2c_imx->clk);
return ret;
}
static int lpi2c_imx_master_disable(struct lpi2c_imx_struct *lpi2c_imx)
{
u32 temp;
temp = readl(lpi2c_imx->base + LPI2C_MCR);
temp &= ~MCR_MEN;
writel(temp, lpi2c_imx->base + LPI2C_MCR);
clk_disable(lpi2c_imx->clk);
return 0;
}
static int lpi2c_imx_msg_complete(struct lpi2c_imx_struct *lpi2c_imx)
{
unsigned long timeout;
timeout = wait_for_completion_timeout(&lpi2c_imx->complete, HZ);
return timeout ? 0 : -ETIMEDOUT;
}
static int lpi2c_imx_txfifo_empty(struct lpi2c_imx_struct *lpi2c_imx)
{
unsigned long orig_jiffies = jiffies;
u32 txcnt;
do {
txcnt = readl(lpi2c_imx->base + LPI2C_MFSR) & 0xff;
if (readl(lpi2c_imx->base + LPI2C_MSR) & MSR_NDF) {
dev_dbg(&lpi2c_imx->adapter.dev, "NDF detected\n");
return -EIO;
}
if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
dev_dbg(&lpi2c_imx->adapter.dev, "txfifo empty timeout\n");
return -ETIMEDOUT;
}
schedule();
} while (txcnt);
return 0;
}
static void lpi2c_imx_set_tx_watermark(struct lpi2c_imx_struct *lpi2c_imx)
{
writel(lpi2c_imx->txfifosize >> 1, lpi2c_imx->base + LPI2C_MFCR);
}
static void lpi2c_imx_set_rx_watermark(struct lpi2c_imx_struct *lpi2c_imx)
{
unsigned int temp, remaining;
remaining = lpi2c_imx->msglen - lpi2c_imx->delivered;
if (remaining > (lpi2c_imx->rxfifosize >> 1))
temp = lpi2c_imx->rxfifosize >> 1;
else
temp = 0;
writel(temp << 16, lpi2c_imx->base + LPI2C_MFCR);
}
static void lpi2c_imx_write_txfifo(struct lpi2c_imx_struct *lpi2c_imx)
{
unsigned int data, txcnt;
txcnt = readl(lpi2c_imx->base + LPI2C_MFSR) & 0xff;
while (txcnt < lpi2c_imx->txfifosize) {
if (lpi2c_imx->delivered == lpi2c_imx->msglen)
break;
data = lpi2c_imx->tx_buf[lpi2c_imx->delivered++];
writel(data, lpi2c_imx->base + LPI2C_MTDR);
txcnt++;
}
if (lpi2c_imx->delivered < lpi2c_imx->msglen)
lpi2c_imx_intctrl(lpi2c_imx, MIER_TDIE | MIER_NDIE);
else
complete(&lpi2c_imx->complete);
}
static void lpi2c_imx_read_rxfifo(struct lpi2c_imx_struct *lpi2c_imx)
{
unsigned int blocklen, remaining;
unsigned int temp, data;
do {
data = readl(lpi2c_imx->base + LPI2C_MRDR);
if (data & MRDR_RXEMPTY)
break;
lpi2c_imx->rx_buf[lpi2c_imx->delivered++] = data & 0xff;
} while (1);
/*
* First byte is the length of remaining packet in the SMBus block
* data read. Add it to msgs->len.
*/
if (lpi2c_imx->block_data) {
blocklen = lpi2c_imx->rx_buf[0];
lpi2c_imx->msglen += blocklen;
}
remaining = lpi2c_imx->msglen - lpi2c_imx->delivered;
if (!remaining) {
complete(&lpi2c_imx->complete);
return;
}
/* not finished, still waiting for rx data */
lpi2c_imx_set_rx_watermark(lpi2c_imx);
/* multiple receive commands */
if (lpi2c_imx->block_data) {
lpi2c_imx->block_data = 0;
temp = remaining;
temp |= (RECV_DATA << 8);
writel(temp, lpi2c_imx->base + LPI2C_MTDR);
} else if (!(lpi2c_imx->delivered & 0xff)) {
temp = (remaining > CHUNK_DATA ? CHUNK_DATA : remaining) - 1;
temp |= (RECV_DATA << 8);
writel(temp, lpi2c_imx->base + LPI2C_MTDR);
}
lpi2c_imx_intctrl(lpi2c_imx, MIER_RDIE);
}
static void lpi2c_imx_write(struct lpi2c_imx_struct *lpi2c_imx,
struct i2c_msg *msgs)
{
lpi2c_imx->tx_buf = msgs->buf;
lpi2c_imx_set_tx_watermark(lpi2c_imx);
lpi2c_imx_write_txfifo(lpi2c_imx);
}
static void lpi2c_imx_read(struct lpi2c_imx_struct *lpi2c_imx,
struct i2c_msg *msgs)
{
unsigned int temp;
lpi2c_imx->rx_buf = msgs->buf;
lpi2c_imx->block_data = msgs->flags & I2C_M_RECV_LEN;
lpi2c_imx_set_rx_watermark(lpi2c_imx);
temp = msgs->len > CHUNK_DATA ? CHUNK_DATA - 1 : msgs->len - 1;
temp |= (RECV_DATA << 8);
writel(temp, lpi2c_imx->base + LPI2C_MTDR);
lpi2c_imx_intctrl(lpi2c_imx, MIER_RDIE | MIER_NDIE);
}
static int lpi2c_imx_xfer(struct i2c_adapter *adapter,
struct i2c_msg *msgs, int num)
{
struct lpi2c_imx_struct *lpi2c_imx = i2c_get_adapdata(adapter);
unsigned int temp;
int i, result;
result = lpi2c_imx_master_enable(lpi2c_imx);
if (result)
return result;
for (i = 0; i < num; i++) {
result = lpi2c_imx_start(lpi2c_imx, &msgs[i]);
if (result)
goto disable;
/* quick smbus */
if (num == 1 && msgs[0].len == 0)
goto stop;
lpi2c_imx->delivered = 0;
lpi2c_imx->msglen = msgs[i].len;
init_completion(&lpi2c_imx->complete);
if (msgs[i].flags & I2C_M_RD)
lpi2c_imx_read(lpi2c_imx, &msgs[i]);
else
lpi2c_imx_write(lpi2c_imx, &msgs[i]);
result = lpi2c_imx_msg_complete(lpi2c_imx);
if (result)
goto stop;
if (!(msgs[i].flags & I2C_M_RD)) {
result = lpi2c_imx_txfifo_empty(lpi2c_imx);
if (result)
goto stop;
}
}
stop:
lpi2c_imx_stop(lpi2c_imx);
temp = readl(lpi2c_imx->base + LPI2C_MSR);
if ((temp & MSR_NDF) && !result)
result = -EIO;
disable:
lpi2c_imx_master_disable(lpi2c_imx);
dev_dbg(&lpi2c_imx->adapter.dev, "<%s> exit with: %s: %d\n", __func__,
(result < 0) ? "error" : "success msg",
(result < 0) ? result : num);
return (result < 0) ? result : num;
}
static irqreturn_t lpi2c_imx_isr(int irq, void *dev_id)
{
struct lpi2c_imx_struct *lpi2c_imx = dev_id;
unsigned int temp;
lpi2c_imx_intctrl(lpi2c_imx, 0);
temp = readl(lpi2c_imx->base + LPI2C_MSR);
if (temp & MSR_RDF)
lpi2c_imx_read_rxfifo(lpi2c_imx);
if (temp & MSR_TDF)
lpi2c_imx_write_txfifo(lpi2c_imx);
if (temp & MSR_NDF)
complete(&lpi2c_imx->complete);
return IRQ_HANDLED;
}
static u32 lpi2c_imx_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
I2C_FUNC_SMBUS_READ_BLOCK_DATA;
}
static struct i2c_algorithm lpi2c_imx_algo = {
.master_xfer = lpi2c_imx_xfer,
.functionality = lpi2c_imx_func,
};
static const struct of_device_id lpi2c_imx_of_match[] = {
{ .compatible = "fsl,imx7ulp-lpi2c" },
{ .compatible = "fsl,imx8dv-lpi2c" },
{ },
};
MODULE_DEVICE_TABLE(of, lpi2c_imx_of_match);
static int lpi2c_imx_probe(struct platform_device *pdev)
{
struct lpi2c_imx_struct *lpi2c_imx;
struct resource *res;
unsigned int temp;
int irq, ret;
lpi2c_imx = devm_kzalloc(&pdev->dev, sizeof(*lpi2c_imx), GFP_KERNEL);
if (!lpi2c_imx)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
lpi2c_imx->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(lpi2c_imx->base))
return PTR_ERR(lpi2c_imx->base);
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "can't get irq number\n");
return irq;
}
lpi2c_imx->adapter.owner = THIS_MODULE;
lpi2c_imx->adapter.algo = &lpi2c_imx_algo;
lpi2c_imx->adapter.dev.parent = &pdev->dev;
lpi2c_imx->adapter.dev.of_node = pdev->dev.of_node;
strlcpy(lpi2c_imx->adapter.name, pdev->name,
sizeof(lpi2c_imx->adapter.name));
lpi2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(lpi2c_imx->clk)) {
dev_err(&pdev->dev, "can't get I2C peripheral clock\n");
return PTR_ERR(lpi2c_imx->clk);
}
ret = of_property_read_u32(pdev->dev.of_node,
"clock-frequency", &lpi2c_imx->bitrate);
if (ret)
lpi2c_imx->bitrate = LPI2C_DEFAULT_RATE;
ret = devm_request_irq(&pdev->dev, irq, lpi2c_imx_isr, 0,
pdev->name, lpi2c_imx);
if (ret) {
dev_err(&pdev->dev, "can't claim irq %d\n", irq);
return ret;
}
i2c_set_adapdata(&lpi2c_imx->adapter, lpi2c_imx);
platform_set_drvdata(pdev, lpi2c_imx);
ret = clk_prepare_enable(lpi2c_imx->clk);
if (ret) {
dev_err(&pdev->dev, "clk enable failed %d\n", ret);
return ret;
}
temp = readl(lpi2c_imx->base + LPI2C_PARAM);
lpi2c_imx->txfifosize = 1 << (temp & 0x0f);
lpi2c_imx->rxfifosize = 1 << ((temp >> 8) & 0x0f);
clk_disable(lpi2c_imx->clk);
ret = i2c_add_adapter(&lpi2c_imx->adapter);
if (ret)
goto clk_unprepare;
dev_info(&lpi2c_imx->adapter.dev, "LPI2C adapter registered\n");
return 0;
clk_unprepare:
clk_unprepare(lpi2c_imx->clk);
return ret;
}
static int lpi2c_imx_remove(struct platform_device *pdev)
{
struct lpi2c_imx_struct *lpi2c_imx = platform_get_drvdata(pdev);
i2c_del_adapter(&lpi2c_imx->adapter);
clk_unprepare(lpi2c_imx->clk);
return 0;
}
static struct platform_driver lpi2c_imx_driver = {
.probe = lpi2c_imx_probe,
.remove = lpi2c_imx_remove,
.driver = {
.name = DRIVER_NAME,
.of_match_table = lpi2c_imx_of_match,
},
};
module_platform_driver(lpi2c_imx_driver);
MODULE_AUTHOR("Gao Pan <pandy.gao@nxp.com>");
MODULE_DESCRIPTION("I2C adapter driver for LPI2C bus");
MODULE_LICENSE("GPL");

View File

@ -0,0 +1,504 @@
/*
* Copyright (c) 2016 Mellanox Technologies. All rights reserved.
* Copyright (c) 2016 Michael Shych <michaels@mellanox.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
/* General defines */
#define MLXPLAT_CPLD_LPC_I2C_BASE_ADDR 0x2000
#define MLXCPLD_I2C_DEVICE_NAME "i2c_mlxcpld"
#define MLXCPLD_I2C_VALID_FLAG (I2C_M_RECV_LEN | I2C_M_RD)
#define MLXCPLD_I2C_BUS_NUM 1
#define MLXCPLD_I2C_DATA_REG_SZ 36
#define MLXCPLD_I2C_MAX_ADDR_LEN 4
#define MLXCPLD_I2C_RETR_NUM 2
#define MLXCPLD_I2C_XFER_TO 500000 /* usec */
#define MLXCPLD_I2C_POLL_TIME 2000 /* usec */
/* LPC I2C registers */
#define MLXCPLD_LPCI2C_LPF_REG 0x0
#define MLXCPLD_LPCI2C_CTRL_REG 0x1
#define MLXCPLD_LPCI2C_HALF_CYC_REG 0x4
#define MLXCPLD_LPCI2C_I2C_HOLD_REG 0x5
#define MLXCPLD_LPCI2C_CMD_REG 0x6
#define MLXCPLD_LPCI2C_NUM_DAT_REG 0x7
#define MLXCPLD_LPCI2C_NUM_ADDR_REG 0x8
#define MLXCPLD_LPCI2C_STATUS_REG 0x9
#define MLXCPLD_LPCI2C_DATA_REG 0xa
/* LPC I2C masks and parametres */
#define MLXCPLD_LPCI2C_RST_SEL_MASK 0x1
#define MLXCPLD_LPCI2C_TRANS_END 0x1
#define MLXCPLD_LPCI2C_STATUS_NACK 0x10
#define MLXCPLD_LPCI2C_NO_IND 0
#define MLXCPLD_LPCI2C_ACK_IND 1
#define MLXCPLD_LPCI2C_NACK_IND 2
struct mlxcpld_i2c_curr_xfer {
u8 cmd;
u8 addr_width;
u8 data_len;
u8 msg_num;
struct i2c_msg *msg;
};
struct mlxcpld_i2c_priv {
struct i2c_adapter adap;
u32 base_addr;
struct mutex lock;
struct mlxcpld_i2c_curr_xfer xfer;
struct device *dev;
};
static void mlxcpld_i2c_lpc_write_buf(u8 *data, u8 len, u32 addr)
{
int i;
for (i = 0; i < len - len % 4; i += 4)
outl(*(u32 *)(data + i), addr + i);
for (; i < len; ++i)
outb(*(data + i), addr + i);
}
static void mlxcpld_i2c_lpc_read_buf(u8 *data, u8 len, u32 addr)
{
int i;
for (i = 0; i < len - len % 4; i += 4)
*(u32 *)(data + i) = inl(addr + i);
for (; i < len; ++i)
*(data + i) = inb(addr + i);
}
static void mlxcpld_i2c_read_comm(struct mlxcpld_i2c_priv *priv, u8 offs,
u8 *data, u8 datalen)
{
u32 addr = priv->base_addr + offs;
switch (datalen) {
case 1:
*(data) = inb(addr);
break;
case 2:
*((u16 *)data) = inw(addr);
break;
case 3:
*((u16 *)data) = inw(addr);
*(data + 2) = inb(addr + 2);
break;
case 4:
*((u32 *)data) = inl(addr);
break;
default:
mlxcpld_i2c_lpc_read_buf(data, datalen, addr);
break;
}
}
static void mlxcpld_i2c_write_comm(struct mlxcpld_i2c_priv *priv, u8 offs,
u8 *data, u8 datalen)
{
u32 addr = priv->base_addr + offs;
switch (datalen) {
case 1:
outb(*(data), addr);
break;
case 2:
outw(*((u16 *)data), addr);
break;
case 3:
outw(*((u16 *)data), addr);
outb(*(data + 2), addr + 2);
break;
case 4:
outl(*((u32 *)data), addr);
break;
default:
mlxcpld_i2c_lpc_write_buf(data, datalen, addr);
break;
}
}
/*
* Check validity of received i2c messages parameters.
* Returns 0 if OK, other - in case of invalid parameters.
*/
static int mlxcpld_i2c_check_msg_params(struct mlxcpld_i2c_priv *priv,
struct i2c_msg *msgs, int num)
{
int i;
if (!num) {
dev_err(priv->dev, "Incorrect 0 num of messages\n");
return -EINVAL;
}
if (unlikely(msgs[0].addr > 0x7f)) {
dev_err(priv->dev, "Invalid address 0x%03x\n",
msgs[0].addr);
return -EINVAL;
}
for (i = 0; i < num; ++i) {
if (unlikely(!msgs[i].buf)) {
dev_err(priv->dev, "Invalid buf in msg[%d]\n",
i);
return -EINVAL;
}
if (unlikely(msgs[0].addr != msgs[i].addr)) {
dev_err(priv->dev, "Invalid addr in msg[%d]\n",
i);
return -EINVAL;
}
}
return 0;
}
/*
* Check if transfer is completed and status of operation.
* Returns 0 - transfer completed (both ACK or NACK),
* negative - transfer isn't finished.
*/
static int mlxcpld_i2c_check_status(struct mlxcpld_i2c_priv *priv, int *status)
{
u8 val;
mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_STATUS_REG, &val, 1);
if (val & MLXCPLD_LPCI2C_TRANS_END) {
if (val & MLXCPLD_LPCI2C_STATUS_NACK)
/*
* The slave is unable to accept the data. No such
* slave, command not understood, or unable to accept
* any more data.
*/
*status = MLXCPLD_LPCI2C_NACK_IND;
else
*status = MLXCPLD_LPCI2C_ACK_IND;
return 0;
}
*status = MLXCPLD_LPCI2C_NO_IND;
return -EIO;
}
static void mlxcpld_i2c_set_transf_data(struct mlxcpld_i2c_priv *priv,
struct i2c_msg *msgs, int num,
u8 comm_len)
{
priv->xfer.msg = msgs;
priv->xfer.msg_num = num;
/*
* All upper layers currently are never use transfer with more than
* 2 messages. Actually, it's also not so relevant in Mellanox systems
* because of HW limitation. Max size of transfer is not more than 32
* bytes in the current x86 LPCI2C bridge.
*/
priv->xfer.cmd = msgs[num - 1].flags & I2C_M_RD;
if (priv->xfer.cmd == I2C_M_RD && comm_len != msgs[0].len) {
priv->xfer.addr_width = msgs[0].len;
priv->xfer.data_len = comm_len - priv->xfer.addr_width;
} else {
priv->xfer.addr_width = 0;
priv->xfer.data_len = comm_len;
}
}
/* Reset CPLD LPCI2C block */
static void mlxcpld_i2c_reset(struct mlxcpld_i2c_priv *priv)
{
u8 val;
mutex_lock(&priv->lock);
mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_CTRL_REG, &val, 1);
val &= ~MLXCPLD_LPCI2C_RST_SEL_MASK;
mlxcpld_i2c_write_comm(priv, MLXCPLD_LPCI2C_CTRL_REG, &val, 1);
mutex_unlock(&priv->lock);
}
/* Make sure the CPLD is ready to start transmitting. */
static int mlxcpld_i2c_check_busy(struct mlxcpld_i2c_priv *priv)
{
u8 val;
mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_STATUS_REG, &val, 1);
if (val & MLXCPLD_LPCI2C_TRANS_END)
return 0;
return -EIO;
}
static int mlxcpld_i2c_wait_for_free(struct mlxcpld_i2c_priv *priv)
{
int timeout = 0;
do {
if (!mlxcpld_i2c_check_busy(priv))
break;
usleep_range(MLXCPLD_I2C_POLL_TIME / 2, MLXCPLD_I2C_POLL_TIME);
timeout += MLXCPLD_I2C_POLL_TIME;
} while (timeout <= MLXCPLD_I2C_XFER_TO);
if (timeout > MLXCPLD_I2C_XFER_TO)
return -ETIMEDOUT;
return 0;
}
/*
* Wait for master transfer to complete.
* It puts current process to sleep until we get interrupt or timeout expires.
* Returns the number of transferred or read bytes or error (<0).
*/
static int mlxcpld_i2c_wait_for_tc(struct mlxcpld_i2c_priv *priv)
{
int status, i, timeout = 0;
u8 datalen;
do {
usleep_range(MLXCPLD_I2C_POLL_TIME / 2, MLXCPLD_I2C_POLL_TIME);
if (!mlxcpld_i2c_check_status(priv, &status))
break;
timeout += MLXCPLD_I2C_POLL_TIME;
} while (status == 0 && timeout < MLXCPLD_I2C_XFER_TO);
switch (status) {
case MLXCPLD_LPCI2C_NO_IND:
return -ETIMEDOUT;
case MLXCPLD_LPCI2C_ACK_IND:
if (priv->xfer.cmd != I2C_M_RD)
return (priv->xfer.addr_width + priv->xfer.data_len);
if (priv->xfer.msg_num == 1)
i = 0;
else
i = 1;
if (!priv->xfer.msg[i].buf)
return -EINVAL;
/*
* Actual read data len will be always the same as
* requested len. 0xff (line pull-up) will be returned
* if slave has no data to return. Thus don't read
* MLXCPLD_LPCI2C_NUM_DAT_REG reg from CPLD.
*/
datalen = priv->xfer.data_len;
mlxcpld_i2c_read_comm(priv, MLXCPLD_LPCI2C_DATA_REG,
priv->xfer.msg[i].buf, datalen);
return datalen;
case MLXCPLD_LPCI2C_NACK_IND:
return -ENXIO;
default:
return -EINVAL;
}
}
static void mlxcpld_i2c_xfer_msg(struct mlxcpld_i2c_priv *priv)
{
int i, len = 0;
u8 cmd;
mlxcpld_i2c_write_comm(priv, MLXCPLD_LPCI2C_NUM_DAT_REG,
&priv->xfer.data_len, 1);
mlxcpld_i2c_write_comm(priv, MLXCPLD_LPCI2C_NUM_ADDR_REG,
&priv->xfer.addr_width, 1);
for (i = 0; i < priv->xfer.msg_num; i++) {
if ((priv->xfer.msg[i].flags & I2C_M_RD) != I2C_M_RD) {
/* Don't write to CPLD buffer in read transaction */
mlxcpld_i2c_write_comm(priv, MLXCPLD_LPCI2C_DATA_REG +
len, priv->xfer.msg[i].buf,
priv->xfer.msg[i].len);
len += priv->xfer.msg[i].len;
}
}
/*
* Set target slave address with command for master transfer.
* It should be latest executed function before CPLD transaction.
*/
cmd = (priv->xfer.msg[0].addr << 1) | priv->xfer.cmd;
mlxcpld_i2c_write_comm(priv, MLXCPLD_LPCI2C_CMD_REG, &cmd, 1);
}
/*
* Generic lpc-i2c transfer.
* Returns the number of processed messages or error (<0).
*/
static int mlxcpld_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
int num)
{
struct mlxcpld_i2c_priv *priv = i2c_get_adapdata(adap);
u8 comm_len = 0;
int i, err;
err = mlxcpld_i2c_check_msg_params(priv, msgs, num);
if (err) {
dev_err(priv->dev, "Incorrect message\n");
return err;
}
for (i = 0; i < num; ++i)
comm_len += msgs[i].len;
/* Check bus state */
if (mlxcpld_i2c_wait_for_free(priv)) {
dev_err(priv->dev, "LPCI2C bridge is busy\n");
/*
* Usually it means something serious has happened.
* We can not have unfinished previous transfer
* so it doesn't make any sense to try to stop it.
* Probably we were not able to recover from the
* previous error.
* The only reasonable thing - is soft reset.
*/
mlxcpld_i2c_reset(priv);
if (mlxcpld_i2c_check_busy(priv)) {
dev_err(priv->dev, "LPCI2C bridge is busy after reset\n");
return -EIO;
}
}
mlxcpld_i2c_set_transf_data(priv, msgs, num, comm_len);
mutex_lock(&priv->lock);
/* Do real transfer. Can't fail */
mlxcpld_i2c_xfer_msg(priv);
/* Wait for transaction complete */
err = mlxcpld_i2c_wait_for_tc(priv);
mutex_unlock(&priv->lock);
return err < 0 ? err : num;
}
static u32 mlxcpld_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
}
static const struct i2c_algorithm mlxcpld_i2c_algo = {
.master_xfer = mlxcpld_i2c_xfer,
.functionality = mlxcpld_i2c_func
};
static struct i2c_adapter_quirks mlxcpld_i2c_quirks = {
.flags = I2C_AQ_COMB_WRITE_THEN_READ,
.max_read_len = MLXCPLD_I2C_DATA_REG_SZ - MLXCPLD_I2C_MAX_ADDR_LEN,
.max_write_len = MLXCPLD_I2C_DATA_REG_SZ,
.max_comb_1st_msg_len = 4,
};
static struct i2c_adapter mlxcpld_i2c_adapter = {
.owner = THIS_MODULE,
.name = "i2c-mlxcpld",
.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.algo = &mlxcpld_i2c_algo,
.quirks = &mlxcpld_i2c_quirks,
.retries = MLXCPLD_I2C_RETR_NUM,
.nr = MLXCPLD_I2C_BUS_NUM,
};
static int mlxcpld_i2c_probe(struct platform_device *pdev)
{
struct mlxcpld_i2c_priv *priv;
int err;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
mutex_init(&priv->lock);
platform_set_drvdata(pdev, priv);
priv->dev = &pdev->dev;
/* Register with i2c layer */
mlxcpld_i2c_adapter.timeout = usecs_to_jiffies(MLXCPLD_I2C_XFER_TO);
priv->adap = mlxcpld_i2c_adapter;
priv->adap.dev.parent = &pdev->dev;
priv->base_addr = MLXPLAT_CPLD_LPC_I2C_BASE_ADDR;
i2c_set_adapdata(&priv->adap, priv);
err = i2c_add_numbered_adapter(&priv->adap);
if (err)
mutex_destroy(&priv->lock);
return err;
}
static int mlxcpld_i2c_remove(struct platform_device *pdev)
{
struct mlxcpld_i2c_priv *priv = platform_get_drvdata(pdev);
i2c_del_adapter(&priv->adap);
mutex_destroy(&priv->lock);
return 0;
}
static struct platform_driver mlxcpld_i2c_driver = {
.probe = mlxcpld_i2c_probe,
.remove = mlxcpld_i2c_remove,
.driver = {
.name = MLXCPLD_I2C_DEVICE_NAME,
},
};
module_platform_driver(mlxcpld_i2c_driver);
MODULE_AUTHOR("Michael Shych <michaels@mellanox.com>");
MODULE_DESCRIPTION("Mellanox I2C-CPLD controller driver");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_ALIAS("platform:i2c-mlxcpld");

View File

@ -36,24 +36,6 @@ static bool octeon_i2c_test_iflg(struct octeon_i2c *i2c)
return (octeon_i2c_ctl_read(i2c) & TWSI_CTL_IFLG);
}
static bool octeon_i2c_test_ready(struct octeon_i2c *i2c, bool *first)
{
if (octeon_i2c_test_iflg(i2c))
return true;
if (*first) {
*first = false;
return false;
}
/*
* IRQ has signaled an event but IFLG hasn't changed.
* Sleep and retry once.
*/
usleep_range(I2C_OCTEON_EVENT_WAIT, 2 * I2C_OCTEON_EVENT_WAIT);
return octeon_i2c_test_iflg(i2c);
}
/**
* octeon_i2c_wait - wait for the IFLG to be set
* @i2c: The struct octeon_i2c
@ -63,7 +45,6 @@ static bool octeon_i2c_test_ready(struct octeon_i2c *i2c, bool *first)
static int octeon_i2c_wait(struct octeon_i2c *i2c)
{
long time_left;
bool first = true;
/*
* Some chip revisions don't assert the irq in the interrupt
@ -80,7 +61,7 @@ static int octeon_i2c_wait(struct octeon_i2c *i2c)
}
i2c->int_enable(i2c);
time_left = wait_event_timeout(i2c->queue, octeon_i2c_test_ready(i2c, &first),
time_left = wait_event_timeout(i2c->queue, octeon_i2c_test_iflg(i2c),
i2c->adap.timeout);
i2c->int_disable(i2c);
@ -102,25 +83,6 @@ static bool octeon_i2c_hlc_test_valid(struct octeon_i2c *i2c)
return (__raw_readq(i2c->twsi_base + SW_TWSI(i2c)) & SW_TWSI_V) == 0;
}
static bool octeon_i2c_hlc_test_ready(struct octeon_i2c *i2c, bool *first)
{
/* check if valid bit is cleared */
if (octeon_i2c_hlc_test_valid(i2c))
return true;
if (*first) {
*first = false;
return false;
}
/*
* IRQ has signaled an event but valid bit isn't cleared.
* Sleep and retry once.
*/
usleep_range(I2C_OCTEON_EVENT_WAIT, 2 * I2C_OCTEON_EVENT_WAIT);
return octeon_i2c_hlc_test_valid(i2c);
}
static void octeon_i2c_hlc_int_clear(struct octeon_i2c *i2c)
{
/* clear ST/TS events, listen for neither */
@ -176,7 +138,6 @@ static void octeon_i2c_hlc_disable(struct octeon_i2c *i2c)
*/
static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c)
{
bool first = true;
int time_left;
/*
@ -195,7 +156,7 @@ static int octeon_i2c_hlc_wait(struct octeon_i2c *i2c)
i2c->hlc_int_enable(i2c);
time_left = wait_event_timeout(i2c->queue,
octeon_i2c_hlc_test_ready(i2c, &first),
octeon_i2c_hlc_test_valid(i2c),
i2c->adap.timeout);
i2c->hlc_int_disable(i2c);
if (!time_left)
@ -789,6 +750,9 @@ static void octeon_i2c_prepare_recovery(struct i2c_adapter *adap)
struct octeon_i2c *i2c = i2c_get_adapdata(adap);
octeon_i2c_hlc_disable(i2c);
octeon_i2c_reg_write(i2c, SW_TWSI_EOP_TWSI_RST, 0);
/* wait for software reset to settle */
udelay(5);
/*
* Bring control register to a good state regardless

View File

@ -1,9 +1,13 @@
/*
* CE4100 PCI-I2C glue code for PXA's driver
* Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
* License: GPL v2
*
* The CE4100's I2C device is more or less the same one as found on PXA.
* It does not support slave mode, the register slightly moved. This PCI
* device provides three bars, every contains a single I2C controller.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/i2c/pxa-i2c.h>
@ -134,35 +138,17 @@ err_mem:
return ret;
}
static void ce4100_i2c_remove(struct pci_dev *dev)
{
struct ce4100_devices *sds;
unsigned int i;
sds = pci_get_drvdata(dev);
for (i = 0; i < ARRAY_SIZE(sds->pdev); i++)
platform_device_unregister(sds->pdev[i]);
pci_disable_device(dev);
kfree(sds);
}
static const struct pci_device_id ce4100_i2c_devices[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e68)},
{ },
};
MODULE_DEVICE_TABLE(pci, ce4100_i2c_devices);
static struct pci_driver ce4100_i2c_driver = {
.driver = {
.suppress_bind_attrs = true,
},
.name = "ce4100_i2c",
.id_table = ce4100_i2c_devices,
.probe = ce4100_i2c_probe,
.remove = ce4100_i2c_remove,
};
module_pci_driver(ce4100_i2c_driver);
MODULE_DESCRIPTION("CE4100 PCI-I2C glue code for PXA's driver");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>");
builtin_pci_driver(ce4100_i2c_driver);

View File

@ -48,6 +48,8 @@ struct pxa_reg_layout {
u32 isar;
u32 ilcr;
u32 iwcr;
u32 fm;
u32 hs;
};
enum pxa_i2c_types {
@ -55,8 +57,12 @@ enum pxa_i2c_types {
REGS_PXA3XX,
REGS_CE4100,
REGS_PXA910,
REGS_A3700,
};
#define ICR_BUSMODE_FM (1 << 16) /* shifted fast mode for armada-3700 */
#define ICR_BUSMODE_HS (1 << 17) /* shifted high speed mode for armada-3700 */
/*
* I2C registers definitions
*/
@ -91,6 +97,15 @@ static struct pxa_reg_layout pxa_reg_layout[] = {
.ilcr = 0x28,
.iwcr = 0x30,
},
[REGS_A3700] = {
.ibmr = 0x00,
.idbr = 0x04,
.icr = 0x08,
.isr = 0x0c,
.isar = 0x10,
.fm = ICR_BUSMODE_FM,
.hs = ICR_BUSMODE_HS,
},
};
static const struct platform_device_id i2c_pxa_id_table[] = {
@ -98,6 +113,7 @@ static const struct platform_device_id i2c_pxa_id_table[] = {
{ "pxa3xx-pwri2c", REGS_PXA3XX },
{ "ce4100-i2c", REGS_CE4100 },
{ "pxa910-i2c", REGS_PXA910 },
{ "armada-3700-i2c", REGS_A3700 },
{ },
};
MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
@ -193,6 +209,8 @@ struct pxa_i2c {
unsigned char master_code;
unsigned long rate;
bool highmode_enter;
u32 fm_mask;
u32 hs_mask;
};
#define _IBMR(i2c) ((i2c)->reg_ibmr)
@ -503,8 +521,8 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
writel(i2c->slave_addr, _ISAR(i2c));
/* set control register values */
writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c));
writel(readl(_ICR(i2c)) | (i2c->high_mode ? ICR_HS : 0), _ICR(i2c));
writel(I2C_ICR_INIT | (i2c->fast_mode ? i2c->fm_mask : 0), _ICR(i2c));
writel(readl(_ICR(i2c)) | (i2c->high_mode ? i2c->hs_mask : 0), _ICR(i2c));
#ifdef CONFIG_I2C_PXA_SLAVE
dev_info(&i2c->adap.dev, "Enabling slave mode\n");
@ -1137,6 +1155,7 @@ static const struct of_device_id i2c_pxa_dt_ids[] = {
{ .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX },
{ .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX },
{ .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 },
{ .compatible = "marvell,armada-3700-i2c", .data = (void *)REGS_A3700 },
{}
};
MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids);
@ -1234,6 +1253,9 @@ static int i2c_pxa_probe(struct platform_device *dev)
i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr;
i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr;
i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr;
i2c->fm_mask = pxa_reg_layout[i2c_type].fm ? : ICR_FM;
i2c->hs_mask = pxa_reg_layout[i2c_type].hs ? : ICR_HS;
if (i2c_type != REGS_CE4100)
i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar;

View File

@ -14,6 +14,7 @@
*
*/
#include <linux/acpi.h>
#include <linux/atomic.h>
#include <linux/clk.h>
#include <linux/delay.h>
@ -132,6 +133,10 @@
/* Max timeout in ms for 32k bytes */
#define TOUT_MAX 300
/* Default values. Use these if FW query fails */
#define DEFAULT_CLK_FREQ 100000
#define DEFAULT_SRC_CLK 20000000
struct qup_i2c_block {
int count;
int pos;
@ -525,6 +530,33 @@ static int qup_i2c_get_data_len(struct qup_i2c_dev *qup)
return data_len;
}
static bool qup_i2c_check_msg_len(struct i2c_msg *msg)
{
return ((msg->flags & I2C_M_RD) && (msg->flags & I2C_M_RECV_LEN));
}
static int qup_i2c_set_tags_smb(u16 addr, u8 *tags, struct qup_i2c_dev *qup,
struct i2c_msg *msg)
{
int len = 0;
if (msg->len > 1) {
tags[len++] = QUP_TAG_V2_DATARD_STOP;
tags[len++] = qup_i2c_get_data_len(qup) - 1;
} else {
tags[len++] = QUP_TAG_V2_START;
tags[len++] = addr & 0xff;
if (msg->flags & I2C_M_TEN)
tags[len++] = addr >> 8;
tags[len++] = QUP_TAG_V2_DATARD;
/* Read 1 byte indicating the length of the SMBus message */
tags[len++] = 1;
}
return len;
}
static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup,
struct i2c_msg *msg, int is_dma)
{
@ -534,6 +566,10 @@ static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup,
int last = (qup->blk.pos == (qup->blk.count - 1)) && (qup->is_last);
/* Handle tags for SMBus block read */
if (qup_i2c_check_msg_len(msg))
return qup_i2c_set_tags_smb(addr, tags, qup, msg);
if (qup->blk.pos == 0) {
tags[len++] = QUP_TAG_V2_START;
tags[len++] = addr & 0xff;
@ -1056,9 +1092,17 @@ static int qup_i2c_read_fifo_v2(struct qup_i2c_dev *qup,
struct i2c_msg *msg)
{
u32 val;
int idx, pos = 0, ret = 0, total;
int idx, pos = 0, ret = 0, total, msg_offset = 0;
/*
* If the message length is already read in
* the first byte of the buffer, account for
* that by setting the offset
*/
if (qup_i2c_check_msg_len(msg) && (msg->len > 1))
msg_offset = 1;
total = qup_i2c_get_data_len(qup);
total -= msg_offset;
/* 2 extra bytes for read tags */
while (pos < (total + 2)) {
@ -1078,8 +1122,8 @@ static int qup_i2c_read_fifo_v2(struct qup_i2c_dev *qup,
if (pos >= (total + 2))
goto out;
msg->buf[qup->pos++] = val & 0xff;
msg->buf[qup->pos + msg_offset] = val & 0xff;
qup->pos++;
}
}
@ -1119,6 +1163,20 @@ static int qup_i2c_read_one_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg)
goto err;
qup->blk.pos++;
/* Handle SMBus block read length */
if (qup_i2c_check_msg_len(msg) && (msg->len == 1)) {
if (msg->buf[0] > I2C_SMBUS_BLOCK_MAX) {
ret = -EPROTO;
goto err;
}
msg->len += msg->buf[0];
qup->pos = 0;
qup_i2c_set_blk_data(qup, msg);
/* set tag length for block read */
qup->blk.tx_tag_len = 2;
qup_i2c_set_read_mode_v2(qup, msg->buf[0]);
}
} while (qup->blk.pos < qup->blk.count);
err:
@ -1204,6 +1262,11 @@ static int qup_i2c_xfer(struct i2c_adapter *adap,
goto out;
}
if (qup_i2c_check_msg_len(&msgs[idx])) {
ret = -EINVAL;
goto out;
}
if (msgs[idx].flags & I2C_M_RD)
ret = qup_i2c_read_one(qup, &msgs[idx]);
else
@ -1358,14 +1421,13 @@ static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup)
static int qup_i2c_probe(struct platform_device *pdev)
{
static const int blk_sizes[] = {4, 16, 32};
struct device_node *node = pdev->dev.of_node;
struct qup_i2c_dev *qup;
unsigned long one_bit_t;
struct resource *res;
u32 io_mode, hw_ver, size;
int ret, fs_div, hs_div;
int src_clk_freq;
u32 clk_freq = 100000;
u32 src_clk_freq = DEFAULT_SRC_CLK;
u32 clk_freq = DEFAULT_CLK_FREQ;
int blocks;
qup = devm_kzalloc(&pdev->dev, sizeof(*qup), GFP_KERNEL);
@ -1376,7 +1438,11 @@ static int qup_i2c_probe(struct platform_device *pdev)
init_completion(&qup->xfer);
platform_set_drvdata(pdev, qup);
of_property_read_u32(node, "clock-frequency", &clk_freq);
ret = device_property_read_u32(qup->dev, "clock-frequency", &clk_freq);
if (ret) {
dev_notice(qup->dev, "using default clock-frequency %d",
DEFAULT_CLK_FREQ);
}
if (of_device_is_compatible(pdev->dev.of_node, "qcom,i2c-qup-v1.1.1")) {
qup->adap.algo = &qup_i2c_algo;
@ -1452,20 +1518,30 @@ nodma:
return qup->irq;
}
qup->clk = devm_clk_get(qup->dev, "core");
if (IS_ERR(qup->clk)) {
dev_err(qup->dev, "Could not get core clock\n");
return PTR_ERR(qup->clk);
}
if (has_acpi_companion(qup->dev)) {
ret = device_property_read_u32(qup->dev,
"src-clock-hz", &src_clk_freq);
if (ret) {
dev_notice(qup->dev, "using default src-clock-hz %d",
DEFAULT_SRC_CLK);
}
ACPI_COMPANION_SET(&qup->adap.dev, ACPI_COMPANION(qup->dev));
} else {
qup->clk = devm_clk_get(qup->dev, "core");
if (IS_ERR(qup->clk)) {
dev_err(qup->dev, "Could not get core clock\n");
return PTR_ERR(qup->clk);
}
qup->pclk = devm_clk_get(qup->dev, "iface");
if (IS_ERR(qup->pclk)) {
dev_err(qup->dev, "Could not get iface clock\n");
return PTR_ERR(qup->pclk);
qup->pclk = devm_clk_get(qup->dev, "iface");
if (IS_ERR(qup->pclk)) {
dev_err(qup->dev, "Could not get iface clock\n");
return PTR_ERR(qup->pclk);
}
qup_i2c_enable_clocks(qup);
src_clk_freq = clk_get_rate(qup->clk);
}
qup_i2c_enable_clocks(qup);
/*
* Bootloaders might leave a pending interrupt on certain QUP's,
* so we reset the core before registering for interrupts.
@ -1512,7 +1588,6 @@ nodma:
size = QUP_INPUT_FIFO_SIZE(io_mode);
qup->in_fifo_sz = qup->in_blk_sz * (2 << size);
src_clk_freq = clk_get_rate(qup->clk);
fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
hs_div = 3;
qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
@ -1631,6 +1706,14 @@ static const struct of_device_id qup_i2c_dt_match[] = {
};
MODULE_DEVICE_TABLE(of, qup_i2c_dt_match);
#if IS_ENABLED(CONFIG_ACPI)
static const struct acpi_device_id qup_i2c_acpi_match[] = {
{ "QCOM8010"},
{ },
};
MODULE_DEVICE_TABLE(acpi, qup_i2c_acpi_match);
#endif
static struct platform_driver qup_i2c_driver = {
.probe = qup_i2c_probe,
.remove = qup_i2c_remove,
@ -1638,6 +1721,7 @@ static struct platform_driver qup_i2c_driver = {
.name = "i2c_qup",
.pm = &qup_i2c_qup_pm_ops,
.of_match_table = qup_i2c_dt_match,
.acpi_match_table = ACPI_PTR(qup_i2c_acpi_match),
},
};

View File

@ -793,7 +793,6 @@ static const struct i2c_algorithm rcar_i2c_algo = {
};
static const struct of_device_id rcar_i2c_dt_ids[] = {
{ .compatible = "renesas,i2c-rcar", .data = (void *)I2C_RCAR_GEN1 },
{ .compatible = "renesas,i2c-r8a7778", .data = (void *)I2C_RCAR_GEN1 },
{ .compatible = "renesas,i2c-r8a7779", .data = (void *)I2C_RCAR_GEN1 },
{ .compatible = "renesas,i2c-r8a7790", .data = (void *)I2C_RCAR_GEN2 },
@ -803,6 +802,10 @@ static const struct of_device_id rcar_i2c_dt_ids[] = {
{ .compatible = "renesas,i2c-r8a7794", .data = (void *)I2C_RCAR_GEN2 },
{ .compatible = "renesas,i2c-r8a7795", .data = (void *)I2C_RCAR_GEN3 },
{ .compatible = "renesas,i2c-r8a7796", .data = (void *)I2C_RCAR_GEN3 },
{ .compatible = "renesas,i2c-rcar", .data = (void *)I2C_RCAR_GEN1 }, /* Deprecated */
{ .compatible = "renesas,rcar-gen1-i2c", .data = (void *)I2C_RCAR_GEN1 },
{ .compatible = "renesas,rcar-gen2-i2c", .data = (void *)I2C_RCAR_GEN2 },
{ .compatible = "renesas,rcar-gen3-i2c", .data = (void *)I2C_RCAR_GEN3 },
{},
};
MODULE_DEVICE_TABLE(of, rcar_i2c_dt_ids);

View File

@ -827,7 +827,6 @@ static const struct sh_mobile_dt_config r8a7740_dt_config = {
};
static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
{ .compatible = "renesas,rmobile-iic", .data = &default_dt_config },
{ .compatible = "renesas,iic-r8a73a4", .data = &fast_clock_dt_config },
{ .compatible = "renesas,iic-r8a7740", .data = &r8a7740_dt_config },
{ .compatible = "renesas,iic-r8a7790", .data = &fast_clock_dt_config },
@ -835,8 +834,11 @@ static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
{ .compatible = "renesas,iic-r8a7792", .data = &fast_clock_dt_config },
{ .compatible = "renesas,iic-r8a7793", .data = &fast_clock_dt_config },
{ .compatible = "renesas,iic-r8a7794", .data = &fast_clock_dt_config },
{ .compatible = "renesas,rcar-gen2-iic", .data = &fast_clock_dt_config },
{ .compatible = "renesas,iic-r8a7795", .data = &fast_clock_dt_config },
{ .compatible = "renesas,rcar-gen3-iic", .data = &fast_clock_dt_config },
{ .compatible = "renesas,iic-sh73a0", .data = &fast_clock_dt_config },
{ .compatible = "renesas,rmobile-iic", .data = &default_dt_config },
{},
};
MODULE_DEVICE_TABLE(of, sh_mobile_i2c_dt_ids);

View File

@ -528,7 +528,7 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
if (!clk_rate) {
dev_err(dev, "input clock rate should not be zero\n");
ret = -EINVAL;
goto err;
goto disable_clk;
}
init_completion(&priv->comp);
@ -547,11 +547,11 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
pdev->name, priv);
if (ret) {
dev_err(dev, "failed to request irq %d\n", irq);
goto err;
goto disable_clk;
}
ret = i2c_add_adapter(&priv->adap);
err:
disable_clk:
if (ret)
clk_disable_unprepare(priv->clk);

View File

@ -373,7 +373,7 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
if (!clk_rate) {
dev_err(dev, "input clock rate should not be zero\n");
ret = -EINVAL;
goto err;
goto disable_clk;
}
init_completion(&priv->comp);
@ -392,11 +392,11 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
priv);
if (ret) {
dev_err(dev, "failed to request irq %d\n", irq);
goto err;
goto disable_clk;
}
ret = i2c_add_adapter(&priv->adap);
err:
disable_clk:
if (ret)
clk_disable_unprepare(priv->clk);

View File

@ -354,7 +354,7 @@ static const struct i2c_algorithm vprbrd_algorithm = {
.functionality = vprbrd_i2c_func,
};
static struct i2c_adapter_quirks vprbrd_quirks = {
static const struct i2c_adapter_quirks vprbrd_quirks = {
.max_read_len = 2048,
.max_write_len = 2048,
};

View File

@ -393,6 +393,7 @@ static int xlp9xx_i2c_probe(struct platform_device *pdev)
init_completion(&priv->msg_complete);
priv->adapter.dev.parent = &pdev->dev;
priv->adapter.algo = &xlp9xx_i2c_algo;
ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&pdev->dev));
priv->adapter.dev.of_node = pdev->dev.of_node;
priv->dev = &pdev->dev;

View File

@ -65,6 +65,9 @@
#define I2C_ADDR_OFFSET_TEN_BIT 0xa000
#define I2C_ADDR_OFFSET_SLAVE 0x1000
#define I2C_ADDR_7BITS_MAX 0x77
#define I2C_ADDR_7BITS_COUNT (I2C_ADDR_7BITS_MAX + 1)
/* core_lock protects i2c_adapter_idr, and guarantees
that device detection, deletion of detected devices, and attach_adapter
calls are serialized */
@ -676,9 +679,12 @@ static inline int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
/* ------------------------------------------------------------------------- */
static const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
const struct i2c_client *client)
{
if (!(id && client))
return NULL;
while (id->name[0]) {
if (strcmp(client->name, id->name) == 0)
return id;
@ -686,17 +692,16 @@ static const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
}
return NULL;
}
EXPORT_SYMBOL_GPL(i2c_match_id);
static int i2c_device_match(struct device *dev, struct device_driver *drv)
{
struct i2c_client *client = i2c_verify_client(dev);
struct i2c_driver *driver;
if (!client)
return 0;
/* Attempt an OF style match */
if (of_driver_match_device(dev, drv))
if (i2c_of_match_device(drv->of_match_table, client))
return 1;
/* Then ACPI style match */
@ -704,9 +709,10 @@ static int i2c_device_match(struct device *dev, struct device_driver *drv)
return 1;
driver = to_i2c_driver(drv);
/* match on an id table if there is one */
if (driver->id_table)
return i2c_match_id(driver->id_table, client) != NULL;
/* Finally an I2C match */
if (i2c_match_id(driver->id_table, client))
return 1;
return 0;
}
@ -893,6 +899,25 @@ static void i2c_init_recovery(struct i2c_adapter *adap)
adap->bus_recovery_info = NULL;
}
static int i2c_smbus_host_notify_to_irq(const struct i2c_client *client)
{
struct i2c_adapter *adap = client->adapter;
unsigned int irq;
if (!adap->host_notify_domain)
return -ENXIO;
if (client->flags & I2C_CLIENT_TEN)
return -EINVAL;
irq = irq_find_mapping(adap->host_notify_domain, client->addr);
if (!irq)
irq = irq_create_mapping(adap->host_notify_domain,
client->addr);
return irq > 0 ? irq : -ENXIO;
}
static int i2c_device_probe(struct device *dev)
{
struct i2c_client *client = i2c_verify_client(dev);
@ -914,6 +939,14 @@ static int i2c_device_probe(struct device *dev)
}
if (irq == -EPROBE_DEFER)
return irq;
/*
* ACPI and OF did not find any useful IRQ, try to see
* if Host Notify can be used.
*/
if (irq < 0) {
dev_dbg(dev, "Using Host Notify IRQ\n");
irq = i2c_smbus_host_notify_to_irq(client);
}
if (irq < 0)
irq = 0;
@ -921,7 +954,13 @@ static int i2c_device_probe(struct device *dev)
}
driver = to_i2c_driver(dev->driver);
if (!driver->probe || !driver->id_table)
/*
* An I2C ID table is not mandatory, if and only if, a suitable Device
* Tree match table entry is supplied for the probing device.
*/
if (!driver->id_table &&
!i2c_of_match_device(dev->driver->of_match_table, client))
return -ENODEV;
if (client->flags & I2C_CLIENT_WAKE) {
@ -956,7 +995,18 @@ static int i2c_device_probe(struct device *dev)
if (status == -EPROBE_DEFER)
goto err_clear_wakeup_irq;
status = driver->probe(client, i2c_match_id(driver->id_table, client));
/*
* When there are no more users of probe(),
* rename probe_new to probe.
*/
if (driver->probe_new)
status = driver->probe_new(client);
else if (driver->probe)
status = driver->probe(client,
i2c_match_id(driver->id_table, client));
else
status = -EINVAL;
if (status)
goto err_detach_pm_domain;
@ -1767,6 +1817,52 @@ struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node)
return adapter;
}
EXPORT_SYMBOL(of_get_i2c_adapter_by_node);
static const struct of_device_id*
i2c_of_match_device_sysfs(const struct of_device_id *matches,
struct i2c_client *client)
{
const char *name;
for (; matches->compatible[0]; matches++) {
/*
* Adding devices through the i2c sysfs interface provides us
* a string to match which may be compatible with the device
* tree compatible strings, however with no actual of_node the
* of_match_device() will not match
*/
if (sysfs_streq(client->name, matches->compatible))
return matches;
name = strchr(matches->compatible, ',');
if (!name)
name = matches->compatible;
else
name++;
if (sysfs_streq(client->name, name))
return matches;
}
return NULL;
}
const struct of_device_id
*i2c_of_match_device(const struct of_device_id *matches,
struct i2c_client *client)
{
const struct of_device_id *match;
if (!(client && matches))
return NULL;
match = of_match_device(matches, &client->dev);
if (match)
return match;
return i2c_of_match_device_sysfs(matches, client);
}
EXPORT_SYMBOL_GPL(i2c_of_match_device);
#else
static void of_i2c_register_devices(struct i2c_adapter *adap) { }
#endif /* CONFIG_OF */
@ -1800,6 +1896,79 @@ static const struct i2c_lock_operations i2c_adapter_lock_ops = {
.unlock_bus = i2c_adapter_unlock_bus,
};
static void i2c_host_notify_irq_teardown(struct i2c_adapter *adap)
{
struct irq_domain *domain = adap->host_notify_domain;
irq_hw_number_t hwirq;
if (!domain)
return;
for (hwirq = 0 ; hwirq < I2C_ADDR_7BITS_COUNT ; hwirq++)
irq_dispose_mapping(irq_find_mapping(domain, hwirq));
irq_domain_remove(domain);
adap->host_notify_domain = NULL;
}
static int i2c_host_notify_irq_map(struct irq_domain *h,
unsigned int virq,
irq_hw_number_t hw_irq_num)
{
irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_simple_irq);
return 0;
}
static const struct irq_domain_ops i2c_host_notify_irq_ops = {
.map = i2c_host_notify_irq_map,
};
static int i2c_setup_host_notify_irq_domain(struct i2c_adapter *adap)
{
struct irq_domain *domain;
if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_HOST_NOTIFY))
return 0;
domain = irq_domain_create_linear(adap->dev.fwnode,
I2C_ADDR_7BITS_COUNT,
&i2c_host_notify_irq_ops, adap);
if (!domain)
return -ENOMEM;
adap->host_notify_domain = domain;
return 0;
}
/**
* i2c_handle_smbus_host_notify - Forward a Host Notify event to the correct
* I2C client.
* @adap: the adapter
* @addr: the I2C address of the notifying device
* Context: can't sleep
*
* Helper function to be called from an I2C bus driver's interrupt
* handler. It will schedule the Host Notify IRQ.
*/
int i2c_handle_smbus_host_notify(struct i2c_adapter *adap, unsigned short addr)
{
int irq;
if (!adap)
return -EINVAL;
irq = irq_find_mapping(adap->host_notify_domain, addr);
if (irq <= 0)
return -ENXIO;
generic_handle_irq(irq);
return 0;
}
EXPORT_SYMBOL_GPL(i2c_handle_smbus_host_notify);
static int i2c_register_adapter(struct i2c_adapter *adap)
{
int res = -EINVAL;
@ -1831,6 +2000,14 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
if (adap->timeout == 0)
adap->timeout = HZ;
/* register soft irqs for Host Notify */
res = i2c_setup_host_notify_irq_domain(adap);
if (res) {
pr_err("adapter '%s': can't create Host Notify IRQs (%d)\n",
adap->name, res);
goto out_list;
}
dev_set_name(&adap->dev, "i2c-%d", adap->nr);
adap->dev.bus = &i2c_bus_type;
adap->dev.type = &i2c_adapter_type;
@ -2068,6 +2245,8 @@ void i2c_del_adapter(struct i2c_adapter *adap)
pm_runtime_disable(&adap->dev);
i2c_host_notify_irq_teardown(adap);
/* wait until all references to the device are gone
*
* FIXME: This is old code and should ideally be replaced by an

View File

@ -241,108 +241,6 @@ int i2c_handle_smbus_alert(struct i2c_client *ara)
}
EXPORT_SYMBOL_GPL(i2c_handle_smbus_alert);
static void smbus_host_notify_work(struct work_struct *work)
{
struct alert_data alert;
struct i2c_adapter *adapter;
unsigned long flags;
u16 payload;
u8 addr;
struct smbus_host_notify *data;
data = container_of(work, struct smbus_host_notify, work);
spin_lock_irqsave(&data->lock, flags);
payload = data->payload;
addr = data->addr;
adapter = data->adapter;
/* clear the pending bit and release the spinlock */
data->pending = false;
spin_unlock_irqrestore(&data->lock, flags);
if (!adapter || !addr)
return;
alert.type = I2C_PROTOCOL_SMBUS_HOST_NOTIFY;
alert.addr = addr;
alert.data = payload;
device_for_each_child(&adapter->dev, &alert, smbus_do_alert);
}
/**
* i2c_setup_smbus_host_notify - Allocate a new smbus_host_notify for the given
* I2C adapter.
* @adapter: the adapter we want to associate a Host Notify function
*
* Returns a struct smbus_host_notify pointer on success, and NULL on failure.
* The resulting smbus_host_notify must not be freed afterwards, it is a
* managed resource already.
*/
struct smbus_host_notify *i2c_setup_smbus_host_notify(struct i2c_adapter *adap)
{
struct smbus_host_notify *host_notify;
host_notify = devm_kzalloc(&adap->dev, sizeof(struct smbus_host_notify),
GFP_KERNEL);
if (!host_notify)
return NULL;
host_notify->adapter = adap;
spin_lock_init(&host_notify->lock);
INIT_WORK(&host_notify->work, smbus_host_notify_work);
return host_notify;
}
EXPORT_SYMBOL_GPL(i2c_setup_smbus_host_notify);
/**
* i2c_handle_smbus_host_notify - Forward a Host Notify event to the correct
* I2C client.
* @host_notify: the struct host_notify attached to the relevant adapter
* @addr: the I2C address of the notifying device
* @data: the payload of the notification
* Context: can't sleep
*
* Helper function to be called from an I2C bus driver's interrupt
* handler. It will schedule the Host Notify work, in turn calling the
* corresponding I2C device driver's alert function.
*
* host_notify should be a valid pointer previously returned by
* i2c_setup_smbus_host_notify().
*/
int i2c_handle_smbus_host_notify(struct smbus_host_notify *host_notify,
unsigned short addr, unsigned int data)
{
unsigned long flags;
struct i2c_adapter *adapter;
if (!host_notify || !host_notify->adapter)
return -EINVAL;
adapter = host_notify->adapter;
spin_lock_irqsave(&host_notify->lock, flags);
if (host_notify->pending) {
spin_unlock_irqrestore(&host_notify->lock, flags);
dev_warn(&adapter->dev, "Host Notify already scheduled.\n");
return -EBUSY;
}
host_notify->payload = data;
host_notify->addr = addr;
/* Mark that there is a pending notification and release the lock */
host_notify->pending = true;
spin_unlock_irqrestore(&host_notify->lock, flags);
return schedule_work(&host_notify->work);
}
EXPORT_SYMBOL_GPL(i2c_handle_smbus_host_notify);
module_i2c_driver(smbalert_driver);
MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");

View File

@ -82,4 +82,15 @@ config I2C_DEMUX_PINCTRL
demultiplexer that uses the pinctrl subsystem. This is useful if you
want to change the I2C master at run-time depending on features.
config I2C_MUX_MLXCPLD
tristate "Mellanox CPLD based I2C multiplexer"
help
If you say yes to this option, support will be included for a
CPLD based I2C multiplexer. This driver provides access to
I2C busses connected through a MUX, which is controlled
by a CPLD register.
This driver can also be built as a module. If so, the module
will be called i2c-mux-mlxcpld.
endmenu

View File

@ -6,6 +6,7 @@ obj-$(CONFIG_I2C_ARB_GPIO_CHALLENGE) += i2c-arb-gpio-challenge.o
obj-$(CONFIG_I2C_DEMUX_PINCTRL) += i2c-demux-pinctrl.o
obj-$(CONFIG_I2C_MUX_GPIO) += i2c-mux-gpio.o
obj-$(CONFIG_I2C_MUX_MLXCPLD) += i2c-mux-mlxcpld.o
obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o
obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o
obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o

View File

@ -21,6 +21,8 @@
struct gpiomux {
struct i2c_mux_gpio_platform_data data;
unsigned gpio_base;
struct gpio_desc **gpios;
int *values;
};
static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned val)
@ -28,8 +30,10 @@ static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned val)
int i;
for (i = 0; i < mux->data.n_gpios; i++)
gpio_set_value_cansleep(mux->gpio_base + mux->data.gpios[i],
val & (1 << i));
mux->values[i] = (val >> i) & 1;
gpiod_set_array_value_cansleep(mux->data.n_gpios,
mux->gpios, mux->values);
}
static int i2c_mux_gpio_select(struct i2c_mux_core *muxc, u32 chan)
@ -176,12 +180,16 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
if (!parent)
return -EPROBE_DEFER;
muxc = i2c_mux_alloc(parent, &pdev->dev, mux->data.n_values, 0, 0,
muxc = i2c_mux_alloc(parent, &pdev->dev, mux->data.n_values,
mux->data.n_gpios * sizeof(*mux->gpios) +
mux->data.n_gpios * sizeof(*mux->values), 0,
i2c_mux_gpio_select, NULL);
if (!muxc) {
ret = -ENOMEM;
goto alloc_failed;
}
mux->gpios = muxc->priv;
mux->values = (int *)(mux->gpios + mux->data.n_gpios);
muxc->priv = mux;
platform_set_drvdata(pdev, muxc);
@ -219,10 +227,12 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
goto err_request_gpio;
}
gpio_desc = gpio_to_desc(gpio_base + mux->data.gpios[i]);
mux->gpios[i] = gpio_desc;
if (!muxc->mux_locked)
continue;
gpio_desc = gpio_to_desc(gpio_base + mux->data.gpios[i]);
gpio_dev = &gpio_desc->gdev->dev;
muxc->mux_locked = i2c_root_adapter(gpio_dev) == root;
}

View File

@ -0,0 +1,220 @@
/*
* drivers/i2c/muxes/i2c-mux-mlxcpld.c
* Copyright (c) 2016 Mellanox Technologies. All rights reserved.
* Copyright (c) 2016 Michael Shych <michaels@mellanox.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/i2c-mux.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/version.h>
#include <linux/i2c/mlxcpld.h>
#define CPLD_MUX_MAX_NCHANS 8
/* mlxcpld_mux - mux control structure:
* @last_chan - last register value
* @client - I2C device client
*/
struct mlxcpld_mux {
u8 last_chan;
struct i2c_client *client;
};
/* MUX logic description.
* Driver can support different mux control logic, according to CPLD
* implementation.
*
* Connectivity schema.
*
* i2c-mlxcpld Digital Analog
* driver
* *--------* * -> mux1 (virt bus2) -> mux -> |
* | I2CLPC | i2c physical * -> mux2 (virt bus3) -> mux -> |
* | bridge | bus 1 *---------* |
* | logic |---------------------> * mux reg * |
* | in CPLD| *---------* |
* *--------* i2c-mux-mlxpcld ^ * -> muxn (virt busn) -> mux -> |
* | driver | |
* | *---------------* | Devices
* | * CPLD (i2c bus)* select |
* | * registers for *--------*
* | * mux selection * deselect
* | *---------------*
* | |
* <--------> <----------->
* i2c cntrl Board cntrl reg
* reg space space (mux select,
* IO, LED, WD, info)
*
*/
static const struct i2c_device_id mlxcpld_mux_id[] = {
{ "mlxcpld_mux_module", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, mlxcpld_mux_id);
/* Write to mux register. Don't use i2c_transfer() and i2c_smbus_xfer()
* for this as they will try to lock adapter a second time.
*/
static int mlxcpld_mux_reg_write(struct i2c_adapter *adap,
struct i2c_client *client, u8 val)
{
struct mlxcpld_mux_plat_data *pdata = dev_get_platdata(&client->dev);
if (adap->algo->master_xfer) {
struct i2c_msg msg;
u8 msgbuf[] = {pdata->sel_reg_addr, val};
msg.addr = client->addr;
msg.flags = 0;
msg.len = 2;
msg.buf = msgbuf;
return __i2c_transfer(adap, &msg, 1);
} else if (adap->algo->smbus_xfer) {
union i2c_smbus_data data;
data.byte = val;
return adap->algo->smbus_xfer(adap, client->addr,
client->flags, I2C_SMBUS_WRITE,
pdata->sel_reg_addr,
I2C_SMBUS_BYTE_DATA, &data);
} else
return -ENODEV;
}
static int mlxcpld_mux_select_chan(struct i2c_mux_core *muxc, u32 chan)
{
struct mlxcpld_mux *data = i2c_mux_priv(muxc);
struct i2c_client *client = data->client;
u8 regval = chan + 1;
int err = 0;
/* Only select the channel if its different from the last channel */
if (data->last_chan != regval) {
err = mlxcpld_mux_reg_write(muxc->parent, client, regval);
if (err)
data->last_chan = 0;
else
data->last_chan = regval;
}
return err;
}
static int mlxcpld_mux_deselect(struct i2c_mux_core *muxc, u32 chan)
{
struct mlxcpld_mux *data = i2c_mux_priv(muxc);
struct i2c_client *client = data->client;
/* Deselect active channel */
data->last_chan = 0;
return mlxcpld_mux_reg_write(muxc->parent, client, data->last_chan);
}
/* Probe/reomove functions */
static int mlxcpld_mux_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
struct mlxcpld_mux_plat_data *pdata = dev_get_platdata(&client->dev);
struct i2c_mux_core *muxc;
int num, force;
struct mlxcpld_mux *data;
int err;
if (!pdata)
return -EINVAL;
if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
return -ENODEV;
muxc = i2c_mux_alloc(adap, &client->dev, CPLD_MUX_MAX_NCHANS,
sizeof(*data), 0, mlxcpld_mux_select_chan,
mlxcpld_mux_deselect);
if (!muxc)
return -ENOMEM;
data = i2c_mux_priv(muxc);
i2c_set_clientdata(client, muxc);
data->client = client;
data->last_chan = 0; /* force the first selection */
/* Create an adapter for each channel. */
for (num = 0; num < CPLD_MUX_MAX_NCHANS; num++) {
if (num >= pdata->num_adaps)
/* discard unconfigured channels */
break;
force = pdata->adap_ids[num];
err = i2c_mux_add_adapter(muxc, force, num, 0);
if (err)
goto virt_reg_failed;
}
return 0;
virt_reg_failed:
i2c_mux_del_adapters(muxc);
return err;
}
static int mlxcpld_mux_remove(struct i2c_client *client)
{
struct i2c_mux_core *muxc = i2c_get_clientdata(client);
i2c_mux_del_adapters(muxc);
return 0;
}
static struct i2c_driver mlxcpld_mux_driver = {
.driver = {
.name = "mlxcpld-mux",
},
.probe = mlxcpld_mux_probe,
.remove = mlxcpld_mux_remove,
.id_table = mlxcpld_mux_id,
};
module_i2c_driver(mlxcpld_mux_driver);
MODULE_AUTHOR("Michael Shych (michaels@mellanox.com)");
MODULE_DESCRIPTION("Mellanox I2C-CPLD-MUX driver");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_ALIAS("platform:i2c-mux-mlxcpld");

View File

@ -35,6 +35,7 @@
* warranty of any kind, whether express or implied.
*/
#include <linux/acpi.h>
#include <linux/device.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
@ -120,6 +121,21 @@ static const struct i2c_device_id pca954x_id[] = {
};
MODULE_DEVICE_TABLE(i2c, pca954x_id);
#ifdef CONFIG_ACPI
static const struct acpi_device_id pca954x_acpi_ids[] = {
{ .id = "PCA9540", .driver_data = pca_9540 },
{ .id = "PCA9542", .driver_data = pca_9540 },
{ .id = "PCA9543", .driver_data = pca_9543 },
{ .id = "PCA9544", .driver_data = pca_9544 },
{ .id = "PCA9545", .driver_data = pca_9545 },
{ .id = "PCA9546", .driver_data = pca_9545 },
{ .id = "PCA9547", .driver_data = pca_9547 },
{ .id = "PCA9548", .driver_data = pca_9548 },
{ }
};
MODULE_DEVICE_TABLE(acpi, pca954x_acpi_ids);
#endif
#ifdef CONFIG_OF
static const struct of_device_id pca954x_of_match[] = {
{ .compatible = "nxp,pca9540", .data = &chips[pca_9540] },
@ -245,8 +261,17 @@ static int pca954x_probe(struct i2c_client *client,
match = of_match_device(of_match_ptr(pca954x_of_match), &client->dev);
if (match)
data->chip = of_device_get_match_data(&client->dev);
else
else if (id)
data->chip = &chips[id->driver_data];
else {
const struct acpi_device_id *acpi_id;
acpi_id = acpi_match_device(ACPI_PTR(pca954x_acpi_ids),
&client->dev);
if (!acpi_id)
return -ENODEV;
data->chip = &chips[acpi_id->driver_data];
}
data->last_chan = 0; /* force the first selection */
@ -321,6 +346,7 @@ static struct i2c_driver pca954x_driver = {
.name = "pca954x",
.pm = &pca954x_pm,
.of_match_table = of_match_ptr(pca954x_of_match),
.acpi_match_table = ACPI_PTR(pca954x_acpi_ids),
},
.probe = pca954x_probe,
.remove = pca954x_remove,

View File

@ -1132,8 +1132,7 @@ static int pm860x_dt_init(struct device_node *np,
return 0;
}
static int pm860x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
static int pm860x_probe(struct i2c_client *client)
{
struct pm860x_platform_data *pdata = dev_get_platdata(&client->dev);
struct device_node *node = client->dev.of_node;
@ -1259,7 +1258,7 @@ static struct i2c_driver pm860x_driver = {
.pm = &pm860x_pm_ops,
.of_match_table = pm860x_dt_ids,
},
.probe = pm860x_probe,
.probe_new = pm860x_probe,
.remove = pm860x_remove,
.id_table = pm860x_id_table,
};

View File

@ -50,31 +50,4 @@ struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter,
struct i2c_smbus_alert_setup *setup);
int i2c_handle_smbus_alert(struct i2c_client *ara);
/**
* smbus_host_notify - internal structure used by the Host Notify mechanism.
* @adapter: the I2C adapter associated with this struct
* @work: worker used to schedule the IRQ in the slave device
* @lock: spinlock to check if a notification is already pending
* @pending: flag set when a notification is pending (any new notification will
* be rejected if pending is true)
* @payload: the actual payload of the Host Notify event
* @addr: the address of the slave device which raised the notification
*
* This struct needs to be allocated by i2c_setup_smbus_host_notify() and does
* not need to be freed. Internally, i2c_setup_smbus_host_notify() uses a
* managed resource to clean this up when the adapter get released.
*/
struct smbus_host_notify {
struct i2c_adapter *adapter;
struct work_struct work;
spinlock_t lock;
bool pending;
u16 payload;
u8 addr;
};
struct smbus_host_notify *i2c_setup_smbus_host_notify(struct i2c_adapter *adap);
int i2c_handle_smbus_host_notify(struct smbus_host_notify *host_notify,
unsigned short addr, unsigned int data);
#endif /* _LINUX_I2C_SMBUS_H */

View File

@ -30,6 +30,7 @@
#include <linux/device.h> /* for struct device */
#include <linux/sched.h> /* for completion */
#include <linux/mutex.h>
#include <linux/irqdomain.h> /* for Host Notify IRQ */
#include <linux/of.h> /* for struct device_node */
#include <linux/swab.h> /* for swab16 */
#include <uapi/linux/i2c.h>
@ -135,7 +136,8 @@ enum i2c_alert_protocol {
* struct i2c_driver - represent an I2C device driver
* @class: What kind of i2c device we instantiate (for detect)
* @attach_adapter: Callback for bus addition (deprecated)
* @probe: Callback for device binding
* @probe: Callback for device binding - soon to be deprecated
* @probe_new: New callback for device binding
* @remove: Callback for device unbinding
* @shutdown: Callback for device shutdown
* @alert: Alert callback, for example for the SMBus alert protocol
@ -178,6 +180,11 @@ struct i2c_driver {
int (*probe)(struct i2c_client *, const struct i2c_device_id *);
int (*remove)(struct i2c_client *);
/* New driver model interface to aid the seamless removal of the
* current probe()'s, more commonly unused than used second parameter.
*/
int (*probe_new)(struct i2c_client *);
/* driver model interfaces that don't relate to enumeration */
void (*shutdown)(struct i2c_client *);
@ -243,6 +250,8 @@ struct i2c_client {
extern struct i2c_client *i2c_verify_client(struct device *dev);
extern struct i2c_adapter *i2c_verify_adapter(struct device *dev);
extern const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
const struct i2c_client *client);
static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj)
{
@ -567,6 +576,8 @@ struct i2c_adapter {
struct i2c_bus_recovery_info *bus_recovery_info;
const struct i2c_adapter_quirks *quirks;
struct irq_domain *host_notify_domain;
};
#define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
@ -739,6 +750,7 @@ static inline u8 i2c_8bit_addr_from_msg(const struct i2c_msg *msg)
return (msg->addr << 1) | (msg->flags & I2C_M_RD ? 1 : 0);
}
int i2c_handle_smbus_host_notify(struct i2c_adapter *adap, unsigned short addr);
/**
* module_i2c_driver() - Helper macro for registering a modular I2C driver
* @__i2c_driver: i2c_driver struct
@ -774,6 +786,10 @@ extern struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
/* must call i2c_put_adapter() when done with returned i2c_adapter device */
struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node);
extern const struct of_device_id
*i2c_of_match_device(const struct of_device_id *matches,
struct i2c_client *client);
#else
static inline struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
@ -790,6 +806,14 @@ static inline struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node
{
return NULL;
}
static inline const struct of_device_id
*i2c_of_match_device(const struct of_device_id *matches,
struct i2c_client *client)
{
return NULL;
}
#endif /* CONFIG_OF */
#if IS_ENABLED(CONFIG_ACPI)

View File

@ -0,0 +1,52 @@
/*
* mlxcpld.h - Mellanox I2C multiplexer support in CPLD
*
* Copyright (c) 2016 Mellanox Technologies. All rights reserved.
* Copyright (c) 2016 Michael Shych <michaels@mellanox.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _LINUX_I2C_MLXCPLD_H
#define _LINUX_I2C_MLXCPLD_H
/* Platform data for the CPLD I2C multiplexers */
/* mlxcpld_mux_plat_data - per mux data, used with i2c_register_board_info
* @adap_ids - adapter array
* @num_adaps - number of adapters
* @sel_reg_addr - mux select register offset in CPLD space
*/
struct mlxcpld_mux_plat_data {
int *adap_ids;
int num_adaps;
int sel_reg_addr;
};
#endif /* _LINUX_I2C_MLXCPLD_H */