Multiplatform support for the RealView

- Tested on the ARM PB11MPCore
 - Tested with boardfile boot
 - Tested with DeviceTree boot
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWdAsTAAoJEEEQszewGV1zMtsP/1So1gjBSf8NfLbRCndf4l3/
 jrviXeGEyGAzvyXvH+KB/24R10NpJMC5zEB8LiUP1Ig/cmNA+XVIJ9IkE8QsjsDx
 dA3aqYHTsXr8w8l6hzVX95GvAsxvg7hQ73rMsSg1x6r6pNeg859M4ZJis5gfB7Pf
 w76Qazl4jJUE79t768mxOKf46Af6D3y/Oa8dpsNW7w3ehzeEODI4N5BvUyZ50vKT
 j8ZdBs++S2ucW1s1zUTeo0wDjaOBK8gNmYKzDtwScCNs5K6l4GcggO0pkrX7MmN/
 quNHcvULU0qnzETMjss6wb4xCAenZ98hqHTnBL2NjHd9A1tvTEGBzRfFx4jb5EI6
 MspsOfxCLpj59QV7qwQJoYbFdzmQo6YgPn+lZoHA5wzxNqt2g0xiBscPYCVO30WT
 mYEF27dUDYzq8EH/BkQ/0dsPcWSNZVWpTYj/14+L766maFsPHJYAVnRk1iRNK9Gq
 uxdu9ZH8VusqFLFkikbNkj9xeFc9M0GN2F5AY0+Li24uzqjClessdXdfiOqQAWZ5
 px0ET819Zz+HG0F8+YNKiLL3Ybnhz8EB4NrncXwSJPrvOGt+xATqSUycqrxwwMsu
 a/kNRaZMRZ7jKdZPPHPESPXdJZKs0vGDThrEFMqKVTFtXfoGNQKdh/Ltixy+rPCH
 CX8QrAZPi7CqRUEMXmFp
 =tfk1
 -----END PGP SIGNATURE-----

Merge tag 'realview-multiplatform-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/multiplatform

Pull "Multiplatform support for the RealView" from Linus Walleij:

Here is the result of my application of the second part of Arnds
patchset, actually enabling multiplatform and getting the RealView
off the ground as a multiplatform target.

It is dependent on an outstanding patch to the irqchips tree bumping
the number of GICs to 2 for the RealView platform. I cannot say I will
be sleepless if these go in side by side: each branch will compile but
will not boot until both trees have been pulled hurting bisectability a
bit.

- Tested on the ARM PB11MPCore
- Tested with boardfile boot
- Tested with DeviceTree boot

* tag 'realview-multiplatform-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: realview: select apropriate targets
  ARM: realview: clean up header files
  ARM: realview: make all header files local
  ARM: no longer make CPU targets visible separately
  ARM: integrator: use explicit core module options
  ARM: realview: enable multiplatform

arch/arm/Kconfig

@@ -345,20 +345,6 @@ config ARM_SINGLE_ARMV7M
 	select SPARSE_IRQ
 	select USE_OF
 
-config ARCH_REALVIEW
-	bool "ARM Ltd. RealView family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select COMMON_CLK
-	select COMMON_CLK_VERSATILE
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PL061 if GPIOLIB
-	select ICST
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_SCHED_CLOCK
-	help
-	  This enables support for ARM Ltd RealView boards.
 
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"

arch/arm/configs/realview-smp_defconfig

@@ -8,10 +8,19 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_REALVIEW=y
+CONFIG_REALVIEW_DT=y
 CONFIG_MACH_REALVIEW_EB=y
+CONFIG_REALVIEW_EB_ARM1136=y
+CONFIG_REALVIEW_EB_ARM1176=y
+CONFIG_REALVIEW_EB_A9MP=y
 CONFIG_REALVIEW_EB_ARM11MP=y
+CONFIG_REALVIEW_EB_ARM11MP_REVB=y
 CONFIG_MACH_REALVIEW_PB11MP=y
+CONFIG_MACH_REALVIEW_PB1176=y
+CONFIG_MACH_REALVIEW_PBA8=y
+CONFIG_MACH_REALVIEW_PBX=y
 CONFIG_SMP=y
 CONFIG_HOTPLUG_CPU=y
 CONFIG_AEABI=y

arch/arm/configs/realview_defconfig

@@ -8,11 +8,19 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_REALVIEW=y
+CONFIG_REALVIEW_DT=y
 CONFIG_MACH_REALVIEW_EB=y
+CONFIG_REALVIEW_EB_ARM1136=y
+CONFIG_REALVIEW_EB_ARM1176=y
+CONFIG_REALVIEW_EB_A9MP=y
 CONFIG_REALVIEW_EB_ARM11MP=y
+CONFIG_REALVIEW_EB_ARM11MP_REVB=y
 CONFIG_MACH_REALVIEW_PB11MP=y
 CONFIG_MACH_REALVIEW_PB1176=y
+CONFIG_MACH_REALVIEW_PBA8=y
+CONFIG_MACH_REALVIEW_PBX=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0

arch/arm/mach-integrator/Kconfig

@@ -1,4 +1,4 @@
-config ARCH_INTEGRATOR
+menuconfig ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family" if (ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6)
 	select ARM_AMBA
 	select ARM_PATCH_PHYS_VIRT if MMU
@@ -23,8 +23,6 @@ config ARCH_INTEGRATOR
 
 if ARCH_INTEGRATOR
 
-menu "Integrator Options"
-
 config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
 	select CLKSRC_MMIO
@@ -36,19 +34,6 @@ config ARCH_INTEGRATOR_AP
 	  Include support for the ARM(R) Integrator/AP and
 	  Integrator/PP2 platforms.
 
-config ARCH_INTEGRATOR_CP
-	bool "Support Integrator/CP platform"
-	select ARCH_CINTEGRATOR
-	select ARM_TIMER_SP804
-	select SERIAL_AMBA_PL011 if TTY
-	select SERIAL_AMBA_PL011_CONSOLE if TTY
-	select SOC_BUS
-	help
-	  Include support for the ARM(R) Integrator CP platform.
-
-config ARCH_CINTEGRATOR
-	bool
-
 config INTEGRATOR_IMPD1
 	bool "Include support for Integrator/IM-PD1"
 	depends on ARCH_INTEGRATOR_AP
@@ -63,6 +48,119 @@ config INTEGRATOR_IMPD1
 	  To compile this driver as a module, choose M here: the
 	  module will be called impd1.
 
-endmenu
+config INTEGRATOR_CM7TDMI
+	bool "Integrator/CM7TDMI core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4 && !MMU
+	select CPU_ARM7TDMI
+
+config INTEGRATOR_CM720T
+	bool "Integrator/CM720T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T
+	select CPU_ARM720T
+
+config INTEGRATOR_CM740T
+	bool "Integrator/CM740T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T && !MMU
+	select CPU_ARM740T
+
+config INTEGRATOR_CM920T
+	bool "Integrator/CM920T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T
+	select CPU_ARM920T
+
+config INTEGRATOR_CM922T_XA10
+	bool "Integrator/CM922T-XA10 core module"
+	depends on ARCH_MULTI_V4T
+	depends on ARCH_INTEGRATOR_AP
+	select CPU_ARM922T
+
+config INTEGRATOR_CM926EJS
+	bool "Integrator/CM926EJ-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+
+config INTEGRATOR_CM940T
+	bool "Integrator/CM940T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T && !MMU
+	select CPU_ARM940T
+
+config INTEGRATOR_CM946ES
+	bool "Integrator/CM946E-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5 && !MMU
+	select CPU_ARM946E
+
+config INTEGRATOR_CM966ES
+	bool "Integrator/CM966E-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on BROKEN # no kernel support
+
+config INTEGRATOR_CM10200E_REV0
+	bool "Integrator/CM10200E rev.0 core module"
+	depends on ARCH_INTEGRATOR_AP && n
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1020
+
+config INTEGRATOR_CM10200E
+	bool "Integrator/CM10200E core module"
+	depends on ARCH_INTEGRATOR_AP && n
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1020E
+
+config INTEGRATOR_CM10220E
+	bool "Integrator/CM10220E core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1022
+
+config INTEGRATOR_CM1026EJS
+	bool "Integrator/CM1026EJ-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1026
+
+config INTEGRATOR_CM1136JFS
+	bool "Integrator/CM1136JF-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+
+config ARCH_INTEGRATOR_CP
+	bool "Support Integrator/CP platform"
+	depends on (!MMU || ARCH_MULTI_V5 || ARCH_MULTI_V6)
+	select ARM_TIMER_SP804
+	select SERIAL_AMBA_PL011 if TTY
+	select SERIAL_AMBA_PL011_CONSOLE if TTY
+	select SOC_BUS
+	help
+	  Include support for the ARM(R) Integrator CP platform.
+
+config INTEGRATOR_CT7T
+	bool "Integrator/CT7TD (ARM7TDMI) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V4T && !MMU
+	select CPU_ARM7TDMI
+
+config INTEGRATOR_CT926
+	bool "Integrator/CT926 (ARM926EJ-S) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+
+config INTEGRATOR_CTB36
+	bool "Integrator/CTB36 (ARM1136JF-S) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+
+config ARCH_CINTEGRATOR
+	depends on ARCH_INTEGRATOR_CP
+	def_bool y
 
 endif

arch/arm/mach-realview/Kconfig

@@ -1,5 +1,16 @@
-menu "RealView platform type"
+menuconfig ARCH_REALVIEW
-	depends on ARCH_REALVIEW
+	bool "ARM Ltd. RealView family" if ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_TIMER_SP804
+	select COMMON_CLK_VERSATILE
+	select GPIO_PL061 if GPIOLIB
+	select ICST
+	select PLAT_VERSATILE
+	select PLAT_VERSATILE_SCHED_CLOCK
+	help
+	  This enables support for ARM Ltd RealView boards.
+
+if ARCH_REALVIEW
 
 config REALVIEW_DT
 	bool "Support RealView(R) Device Tree based boot"
@@ -7,6 +18,7 @@ config REALVIEW_DT
 	select CLK_SP810
 	select HAVE_SMP
 	select ICST
+	select MACH_REALVIEW_EB if ARCH_MULTI_V5
 	select MFD_SYSCON
 	select POWER_RESET
 	select POWER_RESET_VERSATILE
@@ -21,14 +33,32 @@ config REALVIEW_DT
 config MACH_REALVIEW_EB
 	bool "Support RealView(R) Emulation Baseboard"
 	select ARM_GIC
+	select CPU_ARM926T if ARCH_MULTI_V5
 	help
 	  Include support for the ARM(R) RealView(R) Emulation Baseboard
-	  platform.
+	  platform. On an ARMv5 kernel, this will include support for
+	  the ARM926EJ-S core tile, while on an ARMv6/v7 kernel, at least
+	  one of the ARM1136, ARM1176, ARM11MPCore or Cortex-A9MPCore
+	  core tile options should be enabled.
+
+config REALVIEW_EB_ARM1136
+	bool "Support ARM1136J(F)-S Tile"
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
+	select CPU_V6
+	help
+	  Enable support for the ARM1136 tile fitted to the
+	  Realview(R) Emulation Baseboard platform.
+
+config REALVIEW_EB_ARM1176
+	bool "Support ARM1176JZ(F)-S Tile"
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
+	help
+	  Enable support for the ARM1176 tile fitted to the
+	  Realview(R) Emulation Baseboard platform.
 
 config REALVIEW_EB_A9MP
 	bool "Support Multicore Cortex-A9 Tile"
-	depends on MACH_REALVIEW_EB
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V7
-	select CPU_V7
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
@@ -39,8 +69,7 @@ config REALVIEW_EB_A9MP
 
 config REALVIEW_EB_ARM11MP
 	bool "Support ARM11MPCore Tile"
-	depends on MACH_REALVIEW_EB
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
-	select CPU_V6K
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
@@ -51,7 +80,7 @@ config REALVIEW_EB_ARM11MP
 
 config REALVIEW_EB_ARM11MP_REVB
 	bool "Support ARM11MPCore RevB Tile"
-	depends on REALVIEW_EB_ARM11MP
+	depends on REALVIEW_EB_ARM11MP && ARCH_MULTI_V6
 	help
 	  Enable support for the ARM11MPCore Revision B tile on the
 	  Realview(R) Emulation Baseboard platform. Since there are device
@@ -60,8 +89,8 @@ config REALVIEW_EB_ARM11MP_REVB
 
 config MACH_REALVIEW_PB11MP
 	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
+	depends on ARCH_MULTI_V6
 	select ARM_GIC
-	select CPU_V6K
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM
@@ -75,6 +104,7 @@ config MACH_REALVIEW_PB11MP
 # ARMv6 CPU without K extensions, but does have the new exclusive ops
 config MACH_REALVIEW_PB1176
 	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
+	depends on ARCH_MULTI_V6
 	select ARM_GIC
 	select CPU_V6
 	select HAVE_TCM
@@ -94,8 +124,8 @@ config REALVIEW_PB1176_SECURE_FLASH
 
 config MACH_REALVIEW_PBA8
 	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
-	select CPU_V7
 	select HAVE_PATA_PLATFORM
 	help
 	  Include support for the ARM(R) RealView Platform Baseboard for
@@ -103,7 +133,8 @@ config MACH_REALVIEW_PBA8
 	  support for PCI-E and Compact Flash.
 
 config MACH_REALVIEW_PBX
-	bool "Support RealView(R) Platform Baseboard Explore"
+	bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
@@ -127,4 +158,4 @@ config REALVIEW_HIGH_PHYS_OFFSET
 	  offset. On the PBX board, disabling this option allows 1GB of
 	  RAM to be used with HIGHMEM.
 
-endmenu
+endif

arch/arm/mach-realview/Makefile

@@ -1,13 +1,18 @@
 #
 # Makefile for the linux kernel.
 #
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
+	-I$(srctree)/arch/arm/plat-versatile/include
+
 
-obj-y					:= core.o
 obj-$(CONFIG_REALVIEW_DT)		+= realview-dt.o platsmp-dt.o
+obj-y					:= core.o
+ifdef CONFIG_ATAGS
 obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
 obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
 obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
 obj-$(CONFIG_MACH_REALVIEW_PBA8)	+= realview_pba8.o
 obj-$(CONFIG_MACH_REALVIEW_PBX)		+= realview_pbx.o
+endif
 obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o

arch/arm/mach-realview/board-eb.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/board-eb.h
- *
  * Copyright (C) 2007 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,7 +19,7 @@
 #ifndef __ASM_ARCH_BOARD_EB_H
 #define __ASM_ARCH_BOARD_EB_H
 
-#include <mach/platform.h>
+#include "platform.h"
 
 /*
  * RealView EB + ARM11MPCore peripheral addresses

arch/arm/mach-realview/board-pb1176.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/board-pb1176.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,7 +19,7 @@
 #ifndef __ASM_ARCH_BOARD_PB1176_H
 #define __ASM_ARCH_BOARD_PB1176_H
 
-#include <mach/platform.h>
+#include "platform.h"
 
 /*
  * Peripheral addresses

arch/arm/mach-realview/board-pb11mp.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/board-pb11mp.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,7 +19,7 @@
 #ifndef __ASM_ARCH_BOARD_PB11MP_H
 #define __ASM_ARCH_BOARD_PB11MP_H
 
-#include <mach/platform.h>
+#include "platform.h"
 
 /*
  * Peripheral addresses

arch/arm/mach-realview/board-pba8.h

@@ -1,6 +1,4 @@
 /*
- * include/asm-arm/arch-realview/board-pba8.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,7 +19,7 @@
 #ifndef __ASM_ARCH_BOARD_PBA8_H
 #define __ASM_ARCH_BOARD_PBA8_H
 
-#include <mach/platform.h>
+#include "platform.h"
 
 /*
  * Peripheral addresses

arch/arm/mach-realview/board-pbx.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/board-pbx.h
- *
  * Copyright (C) 2009 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -20,7 +18,7 @@
 #ifndef __ASM_ARCH_BOARD_PBX_H
 #define __ASM_ARCH_BOARD_PBX_H
 
-#include <mach/platform.h>
+#include "platform.h"
 
 /*
  * Peripheral addresses

arch/arm/mach-realview/core.c

@@ -36,8 +36,7 @@
 #include <linux/memblock.h>
 
 #include <clocksource/timer-sp804.h>
-
+#include "hardware.h"
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/icst.h>
@@ -46,8 +45,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 
-#include <mach/platform.h>
+#include "platform.h"
-#include <mach/irqs.h>
 
 #include <plat/sched_clock.h>
 

arch/arm/mach-realview/core.h

@@ -1,6 +1,4 @@
 /*
- *  linux/arch/arm/mach-realview/core.h
- *
  *  Copyright (C) 2004 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
  *

arch/arm/mach-realview/hardware.h

@@ -1,6 +1,4 @@
 /*
- *  arch/arm/mach-realview/include/mach/hardware.h
- *
  *  This file contains the hardware definitions of the RealView boards.
  *
  *  Copyright (C) 2003 ARM Limited.

arch/arm/mach-realview/include/mach/irqs.h

@@ -1,40 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/irqs.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <mach/irqs-eb.h>
-#include <mach/irqs-pb11mp.h>
-#include <mach/irqs-pb1176.h>
-#include <mach/irqs-pba8.h>
-#include <mach/irqs-pbx.h>
-
-#define IRQ_LOCALTIMER		29
-#define IRQ_LOCALWDOG		30
-
-#define IRQ_GIC_START		32
-
-#ifndef NR_IRQS
-#error "NR_IRQS not defined by the board-specific files"
-#endif
-
-#endif

arch/arm/mach-realview/include/mach/uncompress.h

@@ -1,77 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/uncompress.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pb1176.h>
-#include <mach/board-pba8.h>
-#include <mach/board-pbx.h>
-
-#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
-#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
-#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
-#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
-
-/*
- * Return the UART base address
- */
-static inline unsigned long get_uart_base(void)
-{
-	if (machine_is_realview_eb())
-		return REALVIEW_EB_UART0_BASE;
-	else if (machine_is_realview_pb11mp())
-		return REALVIEW_PB11MP_UART0_BASE;
-	else if (machine_is_realview_pb1176())
-		return REALVIEW_PB1176_UART0_BASE;
-	else if (machine_is_realview_pba8())
-		return REALVIEW_PBA8_UART0_BASE;
-	else if (machine_is_realview_pbx())
-		return REALVIEW_PBX_UART0_BASE;
-	else
-		return 0;
-}
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR(base) = c;
-}
-
-static inline void flush(void)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()

arch/arm/mach-realview/irqs-eb.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/irqs-eb.h
- *
  * Copyright (C) 2007 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,6 +19,7 @@
 #ifndef __MACH_IRQS_EB_H
 #define __MACH_IRQS_EB_H
 
+#define IRQ_LOCALTIMER		29
 #define IRQ_EB_GIC_START	32
 
 /*
@@ -112,21 +111,4 @@
 
 #define NR_GIC_EB11MP		2
 
-/*
- * Only define NR_IRQS if less than NR_IRQS_EB
- */
-#define NR_IRQS_EB		(IRQ_EB_GIC_START + 128)
-
-#if defined(CONFIG_MACH_REALVIEW_EB) \
-	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_EB
-#endif
-
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
-	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_EB11MP
-#endif
-
 #endif	/* __MACH_IRQS_EB_H */

arch/arm/mach-realview/irqs-pb1176.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/irqs-pb1176.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -76,25 +74,4 @@
 
 #define IRQ_PB1176_SCTL		-1
 
-#define NR_GIC_PB1176		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB1176
- */
-#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB1176)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB1176
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB1176
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
-
 #endif	/* __MACH_IRQS_PB1176_H */

arch/arm/mach-realview/irqs-pb11mp.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/irqs-pb11mp.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,6 +19,7 @@
 #ifndef __MACH_IRQS_PB11MP_H
 #define __MACH_IRQS_PB11MP_H
 
+#define IRQ_LOCALTIMER				29
 #define IRQ_TC11MP_GIC_START			32
 #define IRQ_PB11MP_GIC_START			64
 
@@ -95,28 +94,4 @@
 #define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
 #define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
 
-#define IRQ_PB11MP_SMC		-1
-#define IRQ_PB11MP_SCTL		-1
-
-#define NR_GIC_PB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB11MP
- */
-#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB11MP)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB11MP
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB11MP
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
-
 #endif	/* __MACH_IRQS_PB11MP_H */

arch/arm/mach-realview/irqs-pba8.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/irqs-pba8.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -70,25 +68,4 @@
 #define IRQ_PBA8_SMC		-1
 #define IRQ_PBA8_SCTL		-1
 
-#define NR_GIC_PBA8		1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBA8
- */
-#define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)
-
-#if defined(CONFIG_MACH_REALVIEW_PBA8)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PBA8
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PBA8
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PBA8 */
-
 #endif	/* __MACH_IRQS_PBA8_H */

arch/arm/mach-realview/irqs-pbx.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/irqs-pbx.h
- *
  * Copyright (C) 2009 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -20,6 +18,7 @@
 #ifndef __MACH_IRQS_PBX_H
 #define __MACH_IRQS_PBX_H
 
+#define IRQ_LOCALTIMER				29
 #define IRQ_PBX_GIC_START			32
 
 /*
@@ -85,25 +84,4 @@
 #define IRQ_PBX_SMC		-1
 #define IRQ_PBX_SCTL		-1
 
-#define NR_GIC_PBX		1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBX
- */
-#define NR_IRQS_PBX		(IRQ_PBX_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PBX)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PBX
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PBX
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PBX */
-
 #endif	/* __MACH_IRQS_PBX_H */

arch/arm/mach-realview/platform.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/platform.h
- *
  * Copyright (c) ARM Limited 2003.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify

arch/arm/mach-realview/platsmp.c

@@ -13,13 +13,13 @@
 #include <linux/smp.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <asm/mach-types.h>
 #include <asm/smp_scu.h>
 
-#include <mach/board-eb.h>
+#include "board-eb.h"
-#include <mach/board-pb11mp.h>
+#include "board-pb11mp.h"
-#include <mach/board-pbx.h>
+#include "board-pbx.h"
 
 #include <plat/platsmp.h>
 

arch/arm/mach-realview/realview-dt.c

@@ -11,7 +11,6 @@
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/cache-l2x0.h>
-#include "core.h"
 
 static const char *const realview_dt_platform_compat[] __initconst = {
 	"arm,realview-eb",

arch/arm/mach-realview/realview_eb.c

@@ -31,7 +31,7 @@
 #include <linux/platform_data/clk-realview.h>
 #include <linux/reboot.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
@@ -44,8 +44,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/board-eb.h>
+#include "board-eb.h"
-#include <mach/irqs.h>
+#include "irqs-eb.h"
 
 #include "core.h"
 

arch/arm/mach-realview/realview_pb1176.c

@@ -34,7 +34,7 @@
 #include <linux/reboot.h>
 #include <linux/memblock.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
@@ -45,8 +45,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/board-pb1176.h>
+#include "board-pb1176.h"
-#include <mach/irqs.h>
+#include "irqs-pb1176.h"
 
 #include "core.h"
 

arch/arm/mach-realview/realview_pb11mp.c

@@ -31,7 +31,7 @@
 #include <linux/platform_data/clk-realview.h>
 #include <linux/reboot.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
@@ -44,8 +44,8 @@
 #include <asm/mach/time.h>
 #include <asm/outercache.h>
 
-#include <mach/board-pb11mp.h>
+#include "board-pb11mp.h"
-#include <mach/irqs.h>
+#include "irqs-pb11mp.h"
 
 #include "core.h"
 

arch/arm/mach-realview/realview_pba8.c

@@ -39,9 +39,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
-#include <mach/board-pba8.h>
+#include "board-pba8.h"
-#include <mach/irqs.h>
+#include "irqs-pba8.h"
 
 #include "core.h"
 

arch/arm/mach-realview/realview_pbx.c

@@ -41,9 +41,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
-#include <mach/board-pbx.h>
+#include "board-pbx.h"
-#include <mach/irqs.h>
+#include "irqs-pbx.h"
 
 #include "core.h"
 

arch/arm/mm/Kconfig

@@ -21,7 +21,7 @@ config CPU_ARM7TDMI
 
 # ARM720T
 config CPU_ARM720T
-	bool "Support ARM720T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
 	select CPU_CACHE_V4
@@ -39,7 +39,7 @@ config CPU_ARM720T
 
 # ARM740T
 config CPU_ARM740T
-	bool "Support ARM740T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
@@ -71,7 +71,7 @@ config CPU_ARM9TDMI
 
 # ARM920T
 config CPU_ARM920T
-	bool "Support ARM920T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -89,7 +89,7 @@ config CPU_ARM920T
 
 # ARM922T
 config CPU_ARM922T
-	bool "Support ARM922T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -108,7 +108,7 @@ config CPU_ARM922T
 
 # ARM925T
 config CPU_ARM925T
- 	bool "Support ARM925T processor" if ARCH_OMAP1
+	bool
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -127,7 +127,7 @@ config CPU_ARM925T
 
 # ARM926T
 config CPU_ARM926T
-	bool "Support ARM926T processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V5) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB)
+	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
 	select CPU_CACHE_VIVT
@@ -163,7 +163,7 @@ config CPU_FA526
 
 # ARM940T
 config CPU_ARM940T
-	bool "Support ARM940T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
@@ -181,7 +181,7 @@ config CPU_ARM940T
 
 # ARM946E-S
 config CPU_ARM946E
-	bool "Support ARM946E-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+	bool
 	depends on !MMU
 	select CPU_32v5
 	select CPU_ABRT_NOMMU
@@ -198,7 +198,7 @@ config CPU_ARM946E
 
 # ARM1020 - needs validating
 config CPU_ARM1020
-	bool "Support ARM1020T (rev 0) processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v5
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -216,7 +216,7 @@ config CPU_ARM1020
 
 # ARM1020E - needs validating
 config CPU_ARM1020E
-	bool "Support ARM1020E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+	bool
 	depends on n
 	select CPU_32v5
 	select CPU_ABRT_EV4T
@@ -229,7 +229,7 @@ config CPU_ARM1020E
 
 # ARM1022E
 config CPU_ARM1022
-	bool "Support ARM1022E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v5
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_VIVT
@@ -247,7 +247,7 @@ config CPU_ARM1022
 
 # ARM1026EJ-S
 config CPU_ARM1026
-	bool "Support ARM1026EJ-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
 	select CPU_CACHE_VIVT
@@ -358,7 +358,7 @@ config CPU_PJ4B
 
 # ARMv6
 config CPU_V6
-	bool "Support ARM V6 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
+	bool
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_CACHE_V6
@@ -371,7 +371,7 @@ config CPU_V6
 
 # ARMv6k
 config CPU_V6K
-	bool "Support ARM V6K processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
+	bool
 	select CPU_32v6
 	select CPU_32v6K
 	select CPU_ABRT_EV6
@@ -385,7 +385,7 @@ config CPU_V6K
 
 # ARMv7
 config CPU_V7
-	bool "Support ARM V7 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V7) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
+	bool
 	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7