mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-05 18:39:59 +00:00
USB: tegra: Add resets & has-utmi-pad-registers flag to the PHY binding
When Tegra was converted to use the standard reset bindings, the PHY was forgotten, probably because all the resetting of the USB blocks were done in the EHCI driver. What also went unnoticed is that resetting the 1st on-chip USB module also wipes some of the UTMI pad configuration registers that are also used by the other USB blocks. So this fact needs to be described in the device tree, and the driver modified not to reset the 1st module at inappropriate times. In order to stay compatible with old device trees, the USB drivers will still function without these properties but with the old, potentially buggy behaviour. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
91c72df1fc
commit
883df42abf
1 changed files with 8 additions and 0 deletions
|
@ -20,6 +20,12 @@ Required properties :
|
|||
Present if phy_type == utmi.
|
||||
- ulpi-link: The clock Tegra provides to the ULPI PHY (cdev2).
|
||||
Present if phy_type == ulpi, and ULPI link mode is in use.
|
||||
- resets : Must contain an entry for each entry in reset-names.
|
||||
See ../reset/reset.txt for details.
|
||||
- reset-names : Must include the following entries:
|
||||
- usb: The PHY's own reset signal.
|
||||
- utmi-pads: The reset of the PHY containing the chip-wide UTMI pad control
|
||||
registers. Required even if phy_type == ulpi.
|
||||
|
||||
Required properties for phy_type == ulpi:
|
||||
- nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
|
||||
|
@ -56,6 +62,8 @@ Optional properties:
|
|||
host means this is a host controller
|
||||
peripheral means it is device controller
|
||||
otg means it can operate as either ("on the go")
|
||||
- nvidia,has-utmi-pad-registers : boolean indicates whether this controller
|
||||
contains the UTMI pad control registers common to all USB controllers.
|
||||
|
||||
VBUS control (required for dr_mode == otg, optional for dr_mode == host):
|
||||
- vbus-supply: regulator for VBUS
|
||||
|
|
Loading…
Reference in a new issue