Merge branch 'linus' into tracing/core

Conflicts:
	kernel/trace/trace_events_filter.c

We use the tracing/core version.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit is contained in:
Ingo Molnar 2009-08-11 14:19:09 +02:00
commit 89034bc2c7
1029 changed files with 32122 additions and 16291 deletions

View File

@ -1856,7 +1856,7 @@ E: rfkoenig@immd4.informatik.uni-erlangen.de
D: The Linux Support Team Erlangen
N: Andreas Koensgen
E: ajk@iehk.rwth-aachen.de
E: ajk@comnets.uni-bremen.de
D: 6pack driver for AX.25
N: Harald Koerfgen
@ -2006,6 +2006,9 @@ E: paul@laufernet.com
D: Soundblaster driver fixes, ISAPnP quirk
S: California, USA
N: Jonathan Layes
D: ARPD support
N: Tom Lees
E: tom@lpsg.demon.co.uk
W: http://www.lpsg.demon.co.uk/
@ -3802,6 +3805,9 @@ S: van Bronckhorststraat 12
S: 2612 XV Delft
S: The Netherlands
N: Thomas Woller
D: CS461x Cirrus Logic sound driver
N: David Woodhouse
E: dwmw2@infradead.org
D: JFFS2 file system, Memory Technology Device subsystem,

View File

@ -94,28 +94,37 @@ What: /sys/block/<disk>/queue/physical_block_size
Date: May 2009
Contact: Martin K. Petersen <martin.petersen@oracle.com>
Description:
This is the smallest unit the storage device can write
without resorting to read-modify-write operation. It is
usually the same as the logical block size but may be
bigger. One example is SATA drives with 4KB sectors
that expose a 512-byte logical block size to the
operating system.
This is the smallest unit a physical storage device can
write atomically. It is usually the same as the logical
block size but may be bigger. One example is SATA
drives with 4KB sectors that expose a 512-byte logical
block size to the operating system. For stacked block
devices the physical_block_size variable contains the
maximum physical_block_size of the component devices.
What: /sys/block/<disk>/queue/minimum_io_size
Date: April 2009
Contact: Martin K. Petersen <martin.petersen@oracle.com>
Description:
Storage devices may report a preferred minimum I/O size,
which is the smallest request the device can perform
without incurring a read-modify-write penalty. For disk
drives this is often the physical block size. For RAID
arrays it is often the stripe chunk size.
Storage devices may report a granularity or preferred
minimum I/O size which is the smallest request the
device can perform without incurring a performance
penalty. For disk drives this is often the physical
block size. For RAID arrays it is often the stripe
chunk size. A properly aligned multiple of
minimum_io_size is the preferred request size for
workloads where a high number of I/O operations is
desired.
What: /sys/block/<disk>/queue/optimal_io_size
Date: April 2009
Contact: Martin K. Petersen <martin.petersen@oracle.com>
Description:
Storage devices may report an optimal I/O size, which is
the device's preferred unit of receiving I/O. This is
rarely reported for disk drives. For RAID devices it is
usually the stripe width or the internal block size.
the device's preferred unit for sustained I/O. This is
rarely reported for disk drives. For RAID arrays it is
usually the stripe width or the internal track size. A
properly aligned multiple of optimal_io_size is the
preferred request size for workloads where sustained
throughput is desired. If no optimal I/O size is
reported this file contains 0.

View File

@ -449,8 +449,8 @@ printk(KERN_INFO "i = %u\n", i);
</para>
<programlisting>
__u32 ipaddress;
printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress));
__be32 ipaddress;
printk(KERN_INFO "my ip: %pI4\n", &amp;ipaddress);
</programlisting>
<para>

View File

@ -83,11 +83,12 @@ not detect it missed following items in original chain.
obj = kmem_cache_alloc(...);
lock_chain(); // typically a spin_lock()
obj->key = key;
atomic_inc(&obj->refcnt);
/*
* we need to make sure obj->key is updated before obj->next
* or obj->refcnt
*/
smp_wmb();
atomic_set(&obj->refcnt, 1);
hlist_add_head_rcu(&obj->obj_node, list);
unlock_chain(); // typically a spin_unlock()
@ -159,6 +160,10 @@ out:
obj = kmem_cache_alloc(cachep);
lock_chain(); // typically a spin_lock()
obj->key = key;
/*
* changes to obj->key must be visible before refcnt one
*/
smp_wmb();
atomic_set(&obj->refcnt, 1);
/*
* insert obj in RCU way (readers might be traversing chain)

View File

@ -21,6 +21,8 @@ ffff8000 ffffffff copy_user_page / clear_user_page use.
For SA11xx and Xscale, this is used to
setup a minicache mapping.
ffff4000 ffffffff cache aliasing on ARMv6 and later CPUs.
ffff1000 ffff7fff Reserved.
Platforms must not use this address range.

View File

@ -1,7 +1,7 @@
/*
* cn_test.c
*
* 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
* 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
@ -194,5 +194,5 @@ module_init(cn_test_init);
module_exit(cn_test_fini);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Connector's test module");

View File

@ -1,7 +1,7 @@
/*
* ucon.c
*
* Copyright (c) 2004+ Evgeniy Polyakov <johnpol@2ka.mipt.ru>
* Copyright (c) 2004+ Evgeniy Polyakov <zbr@ioremap.net>
*
*
* This program is free software; you can redistribute it and/or modify

View File

@ -23,7 +23,8 @@ interface.
Using sysfs
~~~~~~~~~~~
sysfs is always compiled in. You can access it by doing:
sysfs is always compiled in if CONFIG_SYSFS is defined. You can access
it by doing:
mount -t sysfs sysfs /sys

View File

@ -139,6 +139,7 @@ Code Seq# Include File Comments
'm' all linux/synclink.h conflict!
'm' 00-1F net/irda/irmod.h conflict!
'n' 00-7F linux/ncp_fs.h
'n' 80-8F linux/nilfs2_fs.h NILFS2
'n' E0-FF video/matrox.h matroxfb
'o' 00-1F fs/ocfs2/ocfs2_fs.h OCFS2
'o' 00-03 include/mtd/ubi-user.h conflict! (OCFS2 and UBI overlaps)

View File

@ -36,8 +36,6 @@ detailed description):
- Bluetooth enable and disable
- video output switching, expansion control
- ThinkLight on and off
- limited docking and undocking
- UltraBay eject
- CMOS/UCMS control
- LED control
- ACPI sounds
@ -729,131 +727,6 @@ cannot be read or if it is unknown, thinkpad-acpi will report it as "off".
It is impossible to know if the status returned through sysfs is valid.
Docking / undocking -- /proc/acpi/ibm/dock
------------------------------------------
Docking and undocking (e.g. with the X4 UltraBase) requires some
actions to be taken by the operating system to safely make or break
the electrical connections with the dock.
The docking feature of this driver generates the following ACPI events:
ibm/dock GDCK 00000003 00000001 -- eject request
ibm/dock GDCK 00000003 00000002 -- undocked
ibm/dock GDCK 00000000 00000003 -- docked
NOTE: These events will only be generated if the laptop was docked
when originally booted. This is due to the current lack of support for
hot plugging of devices in the Linux ACPI framework. If the laptop was
booted while not in the dock, the following message is shown in the
logs:
Mar 17 01:42:34 aero kernel: thinkpad_acpi: dock device not present
In this case, no dock-related events are generated but the dock and
undock commands described below still work. They can be executed
manually or triggered by Fn key combinations (see the example acpid
configuration files included in the driver tarball package available
on the web site).
When the eject request button on the dock is pressed, the first event
above is generated. The handler for this event should issue the
following command:
echo undock > /proc/acpi/ibm/dock
After the LED on the dock goes off, it is safe to eject the laptop.
Note: if you pressed this key by mistake, go ahead and eject the
laptop, then dock it back in. Otherwise, the dock may not function as
expected.
When the laptop is docked, the third event above is generated. The
handler for this event should issue the following command to fully
enable the dock:
echo dock > /proc/acpi/ibm/dock
The contents of the /proc/acpi/ibm/dock file shows the current status
of the dock, as provided by the ACPI framework.
The docking support in this driver does not take care of enabling or
disabling any other devices you may have attached to the dock. For
example, a CD drive plugged into the UltraBase needs to be disabled or
enabled separately. See the provided example acpid configuration files
for how this can be accomplished.
There is no support yet for PCI devices that may be attached to a
docking station, e.g. in the ThinkPad Dock II. The driver currently
does not recognize, enable or disable such devices. This means that
the only docking stations currently supported are the X-series
UltraBase docks and "dumb" port replicators like the Mini Dock (the
latter don't need any ACPI support, actually).
UltraBay eject -- /proc/acpi/ibm/bay
------------------------------------
Inserting or ejecting an UltraBay device requires some actions to be
taken by the operating system to safely make or break the electrical
connections with the device.
This feature generates the following ACPI events:
ibm/bay MSTR 00000003 00000000 -- eject request
ibm/bay MSTR 00000001 00000000 -- eject lever inserted
NOTE: These events will only be generated if the UltraBay was present
when the laptop was originally booted (on the X series, the UltraBay
is in the dock, so it may not be present if the laptop was undocked).
This is due to the current lack of support for hot plugging of devices
in the Linux ACPI framework. If the laptop was booted without the
UltraBay, the following message is shown in the logs:
Mar 17 01:42:34 aero kernel: thinkpad_acpi: bay device not present
In this case, no bay-related events are generated but the eject
command described below still works. It can be executed manually or
triggered by a hot key combination.
Sliding the eject lever generates the first event shown above. The
handler for this event should take whatever actions are necessary to
shut down the device in the UltraBay (e.g. call idectl), then issue
the following command:
echo eject > /proc/acpi/ibm/bay
After the LED on the UltraBay goes off, it is safe to pull out the
device.
When the eject lever is inserted, the second event above is
generated. The handler for this event should take whatever actions are
necessary to enable the UltraBay device (e.g. call idectl).
The contents of the /proc/acpi/ibm/bay file shows the current status
of the UltraBay, as provided by the ACPI framework.
EXPERIMENTAL warm eject support on the 600e/x, A22p and A3x (To use
this feature, you need to supply the experimental=1 parameter when
loading the module):
These models do not have a button near the UltraBay device to request
a hot eject but rather require the laptop to be put to sleep
(suspend-to-ram) before the bay device is ejected or inserted).
The sequence of steps to eject the device is as follows:
echo eject > /proc/acpi/ibm/bay
put the ThinkPad to sleep
remove the drive
resume from sleep
cat /proc/acpi/ibm/bay should show that the drive was removed
On the A3x, both the UltraBay 2000 and UltraBay Plus devices are
supported. Use "eject2" instead of "eject" for the second bay.
Note: the UltraBay eject support on the 600e/x, A22p and A3x is
EXPERIMENTAL and may not work as expected. USE WITH CAUTION!
CMOS/UCMS control
-----------------

File diff suppressed because it is too large Load Diff

View File

@ -30,9 +30,9 @@ State
The validator tracks lock-class usage history into 4n + 1 separate state bits:
- 'ever held in STATE context'
- 'ever head as readlock in STATE context'
- 'ever head with STATE enabled'
- 'ever head as readlock with STATE enabled'
- 'ever held as readlock in STATE context'
- 'ever held with STATE enabled'
- 'ever held as readlock with STATE enabled'
Where STATE can be either one of (kernel/lockdep_states.h)
- hardirq

View File

@ -1,7 +1,7 @@
This is the 6pack-mini-HOWTO, written by
Andreas Könsgen DG3KQ
Internet: ajk@iehk.rwth-aachen.de
Internet: ajk@comnets.uni-bremen.de
AMPR-net: dg3kq@db0pra.ampr.org
AX.25: dg3kq@db0ach.#nrw.deu.eu

View File

@ -101,6 +101,8 @@ card*/pcm*/xrun_debug
bit 0 = Enable XRUN/jiffies debug messages
bit 1 = Show stack trace at XRUN / jiffies check
bit 2 = Enable additional jiffies check
bit 3 = Log hwptr update at each period interrupt
bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr()
When the bit 0 is set, the driver will show the messages to
kernel log when an xrun is detected. The debug message is
@ -117,6 +119,9 @@ card*/pcm*/xrun_debug
buggy) hardware that doesn't give smooth pointer updates.
This feature is enabled via the bit 2.
Bits 3 and 4 are for logging the hwptr records. Note that
these will give flood of kernel messages.
card*/pcm*/sub*/info
The general information of this PCM sub-stream.

View File

@ -66,7 +66,8 @@ On all - write a character to /proc/sysrq-trigger. e.g.:
'b' - Will immediately reboot the system without syncing or unmounting
your disks.
'c' - Will perform a kexec reboot in order to take a crashdump.
'c' - Will perform a system crash by a NULL pointer dereference.
A crashdump will be taken if configured.
'd' - Shows all locks that are held.
@ -141,8 +142,8 @@ useful when you want to exit a program that will not let you switch consoles.
re'B'oot is good when you're unable to shut down. But you should also 'S'ync
and 'U'mount first.
'C'rashdump can be used to manually trigger a crashdump when the system is hung.
The kernel needs to have been built with CONFIG_KEXEC enabled.
'C'rash can be used to manually trigger a crashdump when the system is hung.
Note that this just triggers a crash if there is no dump mechanism available.
'S'ync is great when your system is locked up, it allows you to sync your
disks and will certainly lessen the chance of data loss and fscking. Note

View File

@ -20,7 +20,7 @@
19 -> EM2860/SAA711X Reference Design (em2860)
20 -> AMD ATI TV Wonder HD 600 (em2880) [0438:b002]
21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800) [eb1a:2801]
22 -> Unknown EM2750/EM2751 webcam grabber (em2750) [eb1a:2750,eb1a:2751]
22 -> EM2710/EM2750/EM2751 webcam grabber (em2750) [eb1a:2750,eb1a:2751]
23 -> Huaqi DLCW-130 (em2750)
24 -> D-Link DUB-T210 TV Tuner (em2820/em2840) [2001:f112]
25 -> Gadmei UTV310 (em2820/em2840)

View File

@ -44,7 +44,9 @@ zc3xx 0458:7007 Genius VideoCam V2
zc3xx 0458:700c Genius VideoCam V3
zc3xx 0458:700f Genius VideoCam Web V2
sonixj 0458:7025 Genius Eye 311Q
sn9c20x 0458:7029 Genius Look 320s
sonixj 0458:702e Genius Slim 310 NB
sn9c20x 045e:00f4 LifeCam VX-6000 (SN9C20x + OV9650)
sonixj 045e:00f5 MicroSoft VX3000
sonixj 045e:00f7 MicroSoft VX1000
ov519 045e:028c Micro$oft xbox cam
@ -282,6 +284,28 @@ sonixj 0c45:613a Microdia Sonix PC Camera
sonixj 0c45:613b Surfer SN-206
sonixj 0c45:613c Sonix Pccam168
sonixj 0c45:6143 Sonix Pccam168
sn9c20x 0c45:6240 PC Camera (SN9C201 + MT9M001)
sn9c20x 0c45:6242 PC Camera (SN9C201 + MT9M111)
sn9c20x 0c45:6248 PC Camera (SN9C201 + OV9655)
sn9c20x 0c45:624e PC Camera (SN9C201 + SOI968)
sn9c20x 0c45:624f PC Camera (SN9C201 + OV9650)
sn9c20x 0c45:6251 PC Camera (SN9C201 + OV9650)
sn9c20x 0c45:6253 PC Camera (SN9C201 + OV9650)
sn9c20x 0c45:6260 PC Camera (SN9C201 + OV7670)
sn9c20x 0c45:6270 PC Camera (SN9C201 + MT9V011/MT9V111/MT9V112)
sn9c20x 0c45:627b PC Camera (SN9C201 + OV7660)
sn9c20x 0c45:627c PC Camera (SN9C201 + HV7131R)
sn9c20x 0c45:627f PC Camera (SN9C201 + OV9650)
sn9c20x 0c45:6280 PC Camera (SN9C202 + MT9M001)
sn9c20x 0c45:6282 PC Camera (SN9C202 + MT9M111)
sn9c20x 0c45:6288 PC Camera (SN9C202 + OV9655)
sn9c20x 0c45:628e PC Camera (SN9C202 + SOI968)
sn9c20x 0c45:628f PC Camera (SN9C202 + OV9650)
sn9c20x 0c45:62a0 PC Camera (SN9C202 + OV7670)
sn9c20x 0c45:62b0 PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112)
sn9c20x 0c45:62b3 PC Camera (SN9C202 + OV9655)
sn9c20x 0c45:62bb PC Camera (SN9C202 + OV7660)
sn9c20x 0c45:62bc PC Camera (SN9C202 + HV7131R)
sunplus 0d64:0303 Sunplus FashionCam DXG
etoms 102c:6151 Qcam Sangha CIF
etoms 102c:6251 Qcam xxxxxx VGA
@ -290,6 +314,7 @@ spca561 10fd:7e50 FlyCam Usb 100
zc3xx 10fd:8050 Typhoon Webshot II USB 300k
ov534 1415:2000 Sony HD Eye for PS3 (SLEH 00201)
pac207 145f:013a Trust WB-1300N
sn9c20x 145f:013d Trust WB-3600R
vc032x 15b8:6001 HP 2.0 Megapixel
vc032x 15b8:6002 HP 2.0 Megapixel rz406aa
spca501 1776:501c Arowana 300K CMOS Camera
@ -300,4 +325,11 @@ spca500 2899:012c Toptro Industrial
spca508 8086:0110 Intel Easy PC Camera
spca500 8086:0630 Intel Pocket PC Camera
spca506 99fa:8988 Grandtec V.cap
sn9c20x a168:0610 Dino-Lite Digital Microscope (SN9C201 + HV7131R)
sn9c20x a168:0611 Dino-Lite Digital Microscope (SN9C201 + HV7131R)
sn9c20x a168:0613 Dino-Lite Digital Microscope (SN9C201 + HV7131R)
sn9c20x a168:0618 Dino-Lite Digital Microscope (SN9C201 + HV7131R)
sn9c20x a168:0614 Dino-Lite Digital Microscope (SN9C201 + MT9M111)
sn9c20x a168:0615 Dino-Lite Digital Microscope (SN9C201 + MT9M111)
sn9c20x a168:0617 Dino-Lite Digital Microscope (SN9C201 + MT9M111)
spca561 abcd:cdee Petcam

File diff suppressed because it is too large Load Diff

View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 31
EXTRAVERSION = -rc3
EXTRAVERSION = -rc5
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*

View File

@ -9,7 +9,7 @@
#include <asm-generic/tlb.h>
#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte)
#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, pte)
#define __pmd_free_tlb(tlb, pmd, address) pmd_free((tlb)->mm, pmd)
#endif

View File

@ -29,7 +29,6 @@ unsigned int __machine_arch_type;
static void putstr(const char *ptr);
#include <linux/compiler.h>
#include <mach/uncompress.h>
#ifdef CONFIG_DEBUG_ICEDCC

View File

@ -17,6 +17,7 @@
#include <linux/err.h>
#include <linux/string.h>
#include <linux/mutex.h>
#include <linux/clk.h>
#include <asm/clkdev.h>
#include <mach/clkdev.h>

View File

@ -1,15 +1,15 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30-rc1
# Wed Apr 8 10:18:06 2009
# Linux kernel version: 2.6.31-rc4
# Fri Jul 24 16:08:06 2009
#
CONFIG_ARM=y
CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
@ -85,7 +84,12 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
#
# Performance Counters
#
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@ -99,6 +103,12 @@ CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
@ -111,7 +121,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@ -138,13 +148,14 @@ CONFIG_FREEZER=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@ -153,25 +164,25 @@ CONFIG_FREEZER=y
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_W90X900 is not set
#
# Freescale MXC Implementations
@ -188,6 +199,8 @@ CONFIG_MACH_MX27=y
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_PCM970_BASEBOARD=y
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_MX27LITE=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
@ -213,7 +226,6 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
# CONFIG_OUTER_CACHE is not set
CONFIG_COMMON_CLKDEV=y
#
@ -238,7 +250,6 @@ CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
@ -253,10 +264,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
@ -361,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@ -474,7 +487,16 @@ CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_MXC=y
# CONFIG_MTD_ONENAND is not set
#
@ -485,7 +507,15 @@ CONFIG_MTD_PHYSMAP=y
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
@ -494,7 +524,21 @@ CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@ -508,7 +552,6 @@ CONFIG_HAVE_IDE=y
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@ -534,6 +577,8 @@ CONFIG_NET_ETHERNET=y
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
CONFIG_FEC=y
# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
@ -580,6 +625,11 @@ CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
@ -592,6 +642,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
@ -644,6 +695,7 @@ CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IMX=y
# CONFIG_I2C_OCORES is not set
@ -668,7 +720,6 @@ CONFIG_I2C_IMX=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@ -719,6 +770,7 @@ CONFIG_W1=y
#
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_MXC=y
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
#
@ -753,54 +805,16 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@ -917,6 +931,7 @@ CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@ -962,12 +977,15 @@ CONFIG_RTC_DRV_PCF8563=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
@ -1021,6 +1039,12 @@ CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_XATTR is not set
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@ -1119,25 +1143,11 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
@ -1151,16 +1161,104 @@ CONFIG_ARM_UNWIND=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
@ -1168,6 +1266,8 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

View File

@ -1,15 +1,15 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30-rc1
# Wed Apr 8 11:06:37 2009
# Linux kernel version: 2.6.31-rc4
# Tue Jul 28 14:11:34 2009
#
CONFIG_ARM=y
CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
@ -86,7 +85,12 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
#
# Performance Counters
#
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
@ -97,6 +101,11 @@ CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
#
# GCOV-based kernel profiling
#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
@ -109,7 +118,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@ -136,13 +145,14 @@ CONFIG_FREEZER=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@ -151,25 +161,25 @@ CONFIG_FREEZER=y
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_W90X900 is not set
#
# Freescale MXC Implementations
@ -178,6 +188,7 @@ CONFIG_ARCH_MXC=y
# CONFIG_ARCH_MX2 is not set
CONFIG_ARCH_MX3=y
CONFIG_ARCH_MX31=y
CONFIG_ARCH_MX35=y
#
# MX3 platforms:
@ -185,12 +196,19 @@ CONFIG_ARCH_MX31=y
CONFIG_MACH_MX31ADS=y
CONFIG_MACH_MX31ADS_WM1133_EV1=y
CONFIG_MACH_PCM037=y
CONFIG_MACH_PCM037_EET=y
CONFIG_MACH_MX31LITE=y
CONFIG_MACH_MX31_3DS=y
CONFIG_MACH_MX31MOBOARD=y
CONFIG_MACH_MX31LILLY=y
CONFIG_MACH_QONG=y
CONFIG_MACH_PCM043=y
CONFIG_MACH_ARMADILLO5X0=y
CONFIG_MACH_MX35_3DS=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
CONFIG_ARCH_HAS_RNGA=y
CONFIG_ARCH_MXC_IOMUX_V3=y
#
# Processor Type
@ -218,6 +236,7 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_L2X0=y
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_COMMON_CLKDEV=y
#
@ -242,7 +261,6 @@ CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
@ -257,10 +275,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
@ -362,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@ -465,7 +485,16 @@ CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_MXC=y
# CONFIG_MTD_ONENAND is not set
#
@ -476,10 +505,30 @@ CONFIG_MTD_PHYSMAP=y
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@ -493,7 +542,6 @@ CONFIG_HAVE_IDE=y
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@ -528,7 +576,7 @@ CONFIG_MII=y
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
# CONFIG_DNET is not set
CONFIG_DNET=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@ -537,8 +585,10 @@ CONFIG_SMSC911X=y
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_CS89x0=y
CONFIG_CS89x0_NONISA_IRQ=y
# CONFIG_CS89x0 is not set
# CONFIG_KS8842 is not set
CONFIG_FEC=y
# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@ -609,6 +659,7 @@ CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IMX=y
# CONFIG_I2C_OCORES is not set
@ -633,7 +684,6 @@ CONFIG_I2C_IMX=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@ -669,6 +719,7 @@ CONFIG_W1=y
#
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_MXC=y
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
#
@ -703,6 +754,8 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
@ -711,10 +764,8 @@ CONFIG_MFD_WM8350_CONFIG_MODE_0=y
CONFIG_MFD_WM8352_CONFIG_MODE_0=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
# CONFIG_AB3100_CORE is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
@ -758,8 +809,10 @@ CONFIG_SOC_CAMERA_MT9T031=y
CONFIG_SOC_CAMERA_MT9V022=y
CONFIG_SOC_CAMERA_TW9910=y
# CONFIG_SOC_CAMERA_PLATFORM is not set
# CONFIG_SOC_CAMERA_OV772X is not set
CONFIG_SOC_CAMERA_OV772X=y
CONFIG_MX3_VIDEO=y
CONFIG_VIDEO_MX3=y
# CONFIG_VIDEO_SH_MOBILE_CEU is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
@ -847,8 +900,11 @@ CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_WM8350=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@ -861,10 +917,12 @@ CONFIG_REGULATOR_WM8350=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@ -921,6 +979,12 @@ CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_XATTR is not set
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@ -937,6 +1001,7 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@ -979,22 +1044,7 @@ CONFIG_FRAME_WARN=1024
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_ARM_UNWIND=y
@ -1094,9 +1144,9 @@ CONFIG_CRYPTO_DES=y
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
@ -1109,9 +1159,10 @@ CONFIG_CRYPTO_HW=y
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
@ -1119,6 +1170,8 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

View File

@ -1107,7 +1107,7 @@ CONFIG_USB_ZERO=m
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_ISP1301_OMAP is not set
CONFIG_TWL4030_USB=y
# CONFIG_TWL4030_USB is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set

View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31-rc1
# Thu Jul 2 00:16:59 2009
# Linux kernel version: 2.6.31-rc3
# Thu Jul 16 23:36:10 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
CONFIG_HAVE_TCM=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@ -113,7 +112,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@ -542,13 +541,14 @@ CONFIG_INPUT_EVDEV=y
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
@ -911,7 +911,6 @@ CONFIG_REGULATOR=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
@ -1122,7 +1121,6 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

View File

@ -159,8 +159,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
#else /* ARM_ARCH_6 */
#include <asm/system.h>
#ifdef CONFIG_SMP
#error SMP not supported on pre-ARMv6 CPUs
#endif

View File

@ -102,8 +102,8 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
}
#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page)
#define pte_free_tlb(tlb, ptep) pte_free((tlb)->mm, ptep)
#define pmd_free_tlb(tlb, pmdp) pmd_free((tlb)->mm, pmdp)
#define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep)
#define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp)
#define tlb_migrate_finish(mm) do { } while (0)

View File

@ -148,7 +148,7 @@ trace:
sub r0, r0, #MCOUNT_INSN_SIZE
mov lr, pc
mov pc, r2
mov lr, r1 @ restore lr
ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
#endif /* CONFIG_DYNAMIC_FTRACE */

View File

@ -133,7 +133,7 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
}
#ifdef CONFIG_CRUNCH
static int preserve_crunch_context(struct crunch_sigframe *frame)
static int preserve_crunch_context(struct crunch_sigframe __user *frame)
{
char kbuf[sizeof(*frame) + 8];
struct crunch_sigframe *kframe;
@ -146,7 +146,7 @@ static int preserve_crunch_context(struct crunch_sigframe *frame)
return __copy_to_user(frame, kframe, sizeof(*frame));
}
static int restore_crunch_context(struct crunch_sigframe *frame)
static int restore_crunch_context(struct crunch_sigframe __user *frame)
{
char kbuf[sizeof(*frame) + 8];
struct crunch_sigframe *kframe;

View File

@ -0,0 +1,102 @@
/*
* Header file for the Atmel AHB DMA Controller driver
*
* Copyright (C) 2008 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT_HDMAC_H
#define AT_HDMAC_H
#include <linux/dmaengine.h>
/**
* struct at_dma_platform_data - Controller configuration parameters
* @nr_channels: Number of channels supported by hardware (max 8)
* @cap_mask: dma_capability flags supported by the platform
*/
struct at_dma_platform_data {
unsigned int nr_channels;
dma_cap_mask_t cap_mask;
};
/**
* enum at_dma_slave_width - DMA slave register access width.
* @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses
* @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses
* @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses
*/
enum at_dma_slave_width {
AT_DMA_SLAVE_WIDTH_8BIT = 0,
AT_DMA_SLAVE_WIDTH_16BIT,
AT_DMA_SLAVE_WIDTH_32BIT,
};
/**
* struct at_dma_slave - Controller-specific information about a slave
* @dma_dev: required DMA master device
* @tx_reg: physical address of data register used for
* memory-to-peripheral transfers
* @rx_reg: physical address of data register used for
* peripheral-to-memory transfers
* @reg_width: peripheral register width
* @cfg: Platform-specific initializer for the CFG register
* @ctrla: Platform-specific initializer for the CTRLA register
*/
struct at_dma_slave {
struct device *dma_dev;
dma_addr_t tx_reg;
dma_addr_t rx_reg;
enum at_dma_slave_width reg_width;
u32 cfg;
u32 ctrla;
};
/* Platform-configurable bits in CFG */
#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */
#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */
#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */
#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */
#define ATC_SRC_H2SEL_SW (0x0 << 9)
#define ATC_SRC_H2SEL_HW (0x1 << 9)
#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */
#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */
#define ATC_DST_H2SEL_SW (0x0 << 13)
#define ATC_DST_H2SEL_HW (0x1 << 13)
#define ATC_SOD (0x1 << 16) /* Stop On Done */
#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */
#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */
#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */
#define ATC_LOCK_IF_L_CHUNK (0x0 << 22)
#define ATC_LOCK_IF_L_BUFFER (0x1 << 22)
#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */
#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */
#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28)
#define ATC_FIFOCFG_HALFFIFO (0x1 << 28)
#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28)
/* Platform-configurable bits in CTRLA */
#define ATC_SCSIZE_MASK (0x7 << 16) /* Source Chunk Transfer Size */
#define ATC_SCSIZE_1 (0x0 << 16)
#define ATC_SCSIZE_4 (0x1 << 16)
#define ATC_SCSIZE_8 (0x2 << 16)
#define ATC_SCSIZE_16 (0x3 << 16)
#define ATC_SCSIZE_32 (0x4 << 16)
#define ATC_SCSIZE_64 (0x5 << 16)
#define ATC_SCSIZE_128 (0x6 << 16)
#define ATC_SCSIZE_256 (0x7 << 16)
#define ATC_DCSIZE_MASK (0x7 << 20) /* Destination Chunk Transfer Size */
#define ATC_DCSIZE_1 (0x0 << 20)
#define ATC_DCSIZE_4 (0x1 << 20)
#define ATC_DCSIZE_8 (0x2 << 20)
#define ATC_DCSIZE_16 (0x3 << 20)
#define ATC_DCSIZE_32 (0x4 << 20)
#define ATC_DCSIZE_64 (0x5 << 20)
#define ATC_DCSIZE_128 (0x6 << 20)
#define ATC_DCSIZE_256 (0x7 << 20)
#endif /* AT_HDMAC_H */

View File

@ -37,7 +37,6 @@
#include <mach/serial.h>
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/common.h>
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000

View File

@ -36,7 +36,6 @@
#include <mach/serial.h>
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/common.h>
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000

View File

@ -45,7 +45,6 @@
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/emac.h>
#include <mach/common.h>
#define DM644X_EVM_PHY_MASK (0x2)
#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */

View File

@ -47,7 +47,6 @@
#include <mach/i2c.h>
#include <mach/mmc.h>
#include <mach/emac.h>
#include <mach/common.h>
#define DM646X_EVM_PHY_MASK (0x2)
#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */

View File

@ -52,7 +52,6 @@
#include <mach/serial.h>
#include <mach/psc.h>
#include <mach/mux.h>
#include <mach/common.h>
#define SFFSDR_PHY_MASK (0x2)
#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */

View File

@ -33,6 +33,7 @@
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/io.h>
#include <mach/dma.h>
#include <mach/hardware.h>

View File

@ -41,9 +41,6 @@
#define TS72XX_OPTIONS2_TS9420_BOOT 0x02
#define TS72XX_NOR_PHYS_BASE 0x60000000
#define TS72XX_NOR2_PHYS_BASE 0x62000000
#define TS72XX_NAND1_DATA_PHYS_BASE 0x60000000
#define TS72XX_NAND2_DATA_PHYS_BASE 0x70000000
#define TS72XX_NAND_DATA_VIRT_BASE 0xfebfc000

View File

@ -112,13 +112,16 @@ static void __init ts72xx_map_io(void)
}
}
/*************************************************************************
* NOR flash (TS-7200 only)
*************************************************************************/
static struct physmap_flash_data ts72xx_flash_data = {
.width = 1,
.width = 2,
};
static struct resource ts72xx_flash_resource = {
.start = TS72XX_NOR_PHYS_BASE,
.end = TS72XX_NOR_PHYS_BASE + SZ_16M - 1,
.start = EP93XX_CS6_PHYS_BASE,
.end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
.flags = IORESOURCE_MEM,
};
@ -132,6 +135,12 @@ static struct platform_device ts72xx_flash = {
.resource = &ts72xx_flash_resource,
};
static void __init ts72xx_register_flash(void)
{
if (board_is_ts7200())
platform_device_register(&ts72xx_flash);
}
static unsigned char ts72xx_rtc_readbyte(unsigned long addr)
{
__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
@ -165,8 +174,7 @@ static struct ep93xx_eth_data ts72xx_eth_data = {
static void __init ts72xx_init_machine(void)
{
ep93xx_init_devices();
if (board_is_ts7200())
platform_device_register(&ts72xx_flash);
ts72xx_register_flash();
platform_device_register(&ts72xx_rtc_device);
ep93xx_register_eth(&ts72xx_eth_data, 1);

View File

@ -289,7 +289,7 @@
#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1 )
#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1 )
#define MPP48_TDM_DTX MPP( 48. 0x2, 0, 1, 0, 0, 0, 1 )
#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1 )
#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1 )
#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1 )

View File

@ -16,6 +16,11 @@
#include <asm/sizes.h>
/*
* Clocks are derived from MCLK, which is 25Mhz
*/
#define KS8695_CLOCK_RATE 25000000
/*
* Physical RAM address.
*/

View File

@ -14,7 +14,8 @@
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H
/* timers are derived from MCLK, which is 25MHz */
#define CLOCK_TICK_RATE 25000000
#include <mach/hardware.h>
#define CLOCK_TICK_RATE KS8695_CLOCK_RATE
#endif

View File

@ -245,6 +245,9 @@ static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs
static void __init ks8695_pci_preinit(void)
{
/* make software reset to avoid freeze if PCI bus was messed up */
__raw_writel(0x80000000, KS8695_PCI_VA + KS8695_PBCS);
/* stage 1 initialization, subid, subdevice = 0x0001 */
__raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID);

View File

@ -36,6 +36,14 @@ config MACH_PCM037
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
config MACH_PCM037_EET
bool "Support pcm037 EET board extensions"
depends on MACH_PCM037
help
Add support for PCM037 EET baseboard extensions. If you are using the
OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
command-line parameter.
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
select ARCH_MX31

View File

@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o
obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o
obj-$(CONFIG_MACH_PCM037) += pcm037.o
obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o
obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o
obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o

View File

@ -31,6 +31,8 @@
#include <linux/smsc911x.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -46,8 +48,10 @@
#include <mach/mmc.h>
#include <mach/ipu.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
#include "devices.h"
#include "crm_regs.h"
static int armadillo5x0_pins[] = {
/* UART1 */
@ -93,7 +97,56 @@ static int armadillo5x0_pins[] = {
MX31_PIN_FPSHIFT__FPSHIFT,
MX31_PIN_DRDY0__DRDY0,
IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
};
/*
* NAND Flash
*/
static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
.width = 1,
.hw_ecc = 1,
};
/*
* MTD NOR Flash
*/
static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
{
.name = "nor.bootloader",
.offset = 0x00000000,
.size = 4*32*1024,
}, {
.name = "nor.kernel",
.offset = MTDPART_OFS_APPEND,
.size = 16*128*1024,
}, {
.name = "nor.userland",
.offset = MTDPART_OFS_APPEND,
.size = 110*128*1024,
}, {
.name = "nor.config",
.offset = MTDPART_OFS_APPEND,
.size = 1*128*1024,
},
};
static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
.width = 2,
.parts = armadillo5x0_nor_flash_partitions,
.nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
};
static struct resource armadillo5x0_nor_flash_resource = {
.flags = IORESOURCE_MEM,
.start = CS0_BASE_ADDR,
.end = CS0_BASE_ADDR + SZ_64M - 1,
};
static struct platform_device armadillo5x0_nor_flash = {
.name = "physmap-flash",
.id = -1,
.num_resources = 1,
.resource = &armadillo5x0_nor_flash_resource,
};
/*
@ -272,6 +325,16 @@ static void __init armadillo5x0_init(void)
/* Register FB */
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
/* Register NOR Flash */
mxc_register_device(&armadillo5x0_nor_flash,
&armadillo5x0_nor_flash_pdata);
/* Register NAND Flash */
mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
/* set NAND page size to 2k if not configured via boot mode pins */
__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
}
static void __init armadillo5x0_timer_init(void)

View File

@ -22,7 +22,6 @@
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/gpio.h>
#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/common.h>

View File

@ -18,7 +18,7 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/plat-ram.h>
@ -33,29 +33,67 @@
#include <linux/irq.h>
#include <linux/fsl_devices.h>
#include <mach/hardware.h>
#include <media/soc_camera.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
#include <mach/board-pcm037.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/ipu.h>
#include <mach/board-pcm037.h>
#include <mach/mmc.h>
#include <mach/mx3_camera.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
#include <mach/mmc.h>
#ifdef CONFIG_I2C_IMX
#include <mach/i2c.h>
#endif
#include "devices.h"
#include "pcm037.h"
static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
static int __init pcm037_variant_setup(char *str)
{
if (!strcmp("eet", str))
pcm037_instance = PCM037_EET;
else if (strcmp("pcm970", str))
pr_warning("Unknown pcm037 baseboard variant %s\n", str);
return 1;
}
/* Supported values: "pcm970" (default) and "eet" */
__setup("pcm037_variant=", pcm037_variant_setup);
enum pcm037_board_variant pcm037_variant(void)
{
return pcm037_instance;
}
/* UART1 with RTS/CTS handshake signals */
static unsigned int pcm037_uart1_handshake_pins[] = {
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
};
/* UART1 without RTS/CTS handshake signals */
static unsigned int pcm037_uart1_pins[] = {
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
};
static unsigned int pcm037_pins[] = {
/* I2C */
MX31_PIN_CSPI2_MOSI__SCL,
MX31_PIN_CSPI2_MISO__SDA,
MX31_PIN_CSPI2_SS2__I2C3_SDA,
MX31_PIN_CSPI2_SCLK__I2C3_SCL,
/* SDHC1 */
MX31_PIN_SD1_DATA3__SD1_DATA3,
MX31_PIN_SD1_DATA2__SD1_DATA2,
@ -73,11 +111,6 @@ static unsigned int pcm037_pins[] = {
MX31_PIN_CSPI1_SS0__SS0,
MX31_PIN_CSPI1_SS1__SS1,
MX31_PIN_CSPI1_SS2__SS2,
/* UART1 */
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
/* UART2 */
MX31_PIN_TXD2__TXD2,
MX31_PIN_RXD2__RXD2,
@ -120,6 +153,22 @@ static unsigned int pcm037_pins[] = {
MX31_PIN_D3_SPL__D3_SPL,
MX31_PIN_D3_CLS__D3_CLS,
MX31_PIN_LCS0__GPI03_23,
/* CSI */
IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
MX31_PIN_CSI_D6__CSI_D6,
MX31_PIN_CSI_D7__CSI_D7,
MX31_PIN_CSI_D8__CSI_D8,
MX31_PIN_CSI_D9__CSI_D9,
MX31_PIN_CSI_D10__CSI_D10,
MX31_PIN_CSI_D11__CSI_D11,
MX31_PIN_CSI_D12__CSI_D12,
MX31_PIN_CSI_D13__CSI_D13,
MX31_PIN_CSI_D14__CSI_D14,
MX31_PIN_CSI_D15__CSI_D15,
MX31_PIN_CSI_HSYNC__CSI_HSYNC,
MX31_PIN_CSI_MCLK__CSI_MCLK,
MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
MX31_PIN_CSI_VSYNC__CSI_VSYNC,
};
static struct physmap_flash_data pcm037_flash_data = {
@ -250,19 +299,43 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
.hw_ecc = 1,
};
#ifdef CONFIG_I2C_IMX
static struct imxi2c_platform_data pcm037_i2c_1_data = {
.bitrate = 100000,
};
static struct imxi2c_platform_data pcm037_i2c_2_data = {
.bitrate = 20000,
};
static struct at24_platform_data board_eeprom = {
.byte_len = 4096,
.page_size = 32,
.flags = AT24_FLAG_ADDR16,
};
static int pcm037_camera_power(struct device *dev, int on)
{
/* disable or enable the camera in X7 or X8 PCM970 connector */
gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
return 0;
}
static struct i2c_board_info pcm037_i2c_2_devices[] = {
{
I2C_BOARD_INFO("mt9t031", 0x5d),
},
};
static struct soc_camera_link iclink = {
.bus_id = 0, /* Must match with the camera ID */
.power = pcm037_camera_power,
.board_info = &pcm037_i2c_2_devices[0],
.i2c_adapter_id = 2,
.module_name = "mt9t031",
};
static struct i2c_board_info pcm037_i2c_devices[] = {
{
{
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
}, {
@ -270,7 +343,14 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
.type = "pcf8563",
}
};
#endif
static struct platform_device pcm037_camera = {
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
.platform_data = &iclink,
},
};
/* Not connected by default */
#ifdef PCM970_SDHC_RW_SWITCH
@ -334,9 +414,41 @@ static struct imxmmc_platform_data sdhc_pdata = {
.exit = pcm970_sdhc1_exit,
};
struct mx3_camera_pdata camera_pdata = {
.dma_dev = &mx3_ipu.dev,
.flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
.mclk_10khz = 2000,
};
static int __init pcm037_camera_alloc_dma(const size_t buf_size)
{
dma_addr_t dma_handle;
void *buf;
int dma;
if (buf_size < 2 * 1024 * 1024)
return -EINVAL;
buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
if (!buf) {
pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
return -ENOMEM;
}
memset(buf, 0, buf_size);
dma = dma_declare_coherent_memory(&mx3_camera.dev,
dma_handle, dma_handle, buf_size,
DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
/* The way we call dma_declare_coherent_memory only a malloc can fail */
return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
}
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
&pcm037_sram_device,
&pcm037_camera,
};
static struct ipu_platform_data mx3_ipu_data = {
@ -377,6 +489,22 @@ static const struct fb_videomode fb_modedb[] = {
.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
}, {
/* 240x320 @ 60 Hz */
.name = "CMEL-OLED",
.refresh = 60,
.xres = 240,
.yres = 320,
.pixclock = 185925,
.left_margin = 9,
.right_margin = 16,
.upper_margin = 7,
.lower_margin = 9,
.hsync_len = 1,
.vsync_len = 1,
.sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
},
};
@ -397,6 +525,14 @@ static void __init mxc_board_init(void)
mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
"pcm037");
if (pcm037_variant() == PCM037_EET)
mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
else
mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
ARRAY_SIZE(pcm037_uart1_handshake_pins),
"pcm037_uart1");
platform_add_devices(devices, ARRAY_SIZE(devices));
mxc_register_device(&mxc_uart_device0, &uart_pdata);
@ -415,18 +551,30 @@ static void __init mxc_board_init(void)
}
#ifdef CONFIG_I2C_IMX
/* I2C adapters and devices */
i2c_register_board_info(1, pcm037_i2c_devices,
ARRAY_SIZE(pcm037_i2c_devices));
mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
#endif
mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
if (!gpio_usbotg_hs_activate())
mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
/* CSI */
/* Camera power: default - off */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
if (!ret)
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
else
iclink.power = NULL;
if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
mxc_register_device(&mx3_camera, &camera_pdata);
}
static void __init pcm037_timer_init(void)
@ -448,4 +596,3 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
.init_machine = mxc_board_init,
.timer = &pcm037_timer,
MACHINE_END

View File

@ -0,0 +1,11 @@
#ifndef __PCM037_H__
#define __PCM037_H__
enum pcm037_board_variant {
PCM037_PCM970,
PCM037_EET,
};
extern enum pcm037_board_variant pcm037_variant(void);
#endif

View File

@ -0,0 +1,204 @@
/*
* Copyright (C) 2009
* Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <mach/common.h>
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
#include <mach/spi.h>
#endif
#include <mach/iomux-mx3.h>
#include <asm/mach-types.h>
#include "pcm037.h"
#include "devices.h"
static unsigned int pcm037_eet_pins[] = {
/* SPI #1 */
MX31_PIN_CSPI1_MISO__MISO,
MX31_PIN_CSPI1_MOSI__MOSI,
MX31_PIN_CSPI1_SCLK__SCLK,
MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
MX31_PIN_CSPI1_SS0__SS0,
MX31_PIN_CSPI1_SS1__SS1,
MX31_PIN_CSPI1_SS2__SS2,
/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
/* GPIO keys */
IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO), /* 0 */
IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /* 1 */
IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO), /* 2 */
IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), /* 3 */
IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO), /* 32 */
IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO), /* 33 */
IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO), /* 34 */
IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO), /* 35 */
IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO), /* 38 */
IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO), /* 39 */
IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO), /* 50 */
IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_GPIO), /* 51 */
IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_GPIO), /* 52 */
IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_GPIO), /* 53 */
/* LEDs */
IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_CONFIG_GPIO), /* 44 */
IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_GPIO), /* 45 */
IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_GPIO), /* 55 */
IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_GPIO), /* 56 */
};
/* SPI */
static struct spi_board_info pcm037_spi_dev[] = {
{
.modalias = "dac124s085",
.max_speed_hz = 400000,
.bus_num = 0,
.chip_select = 0, /* Index in pcm037_spi1_cs[] */
.mode = SPI_CPHA,
},
};
/* Platform Data for MXC CSPI */
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
struct spi_imx_master pcm037_spi1_master = {
.chipselect = pcm037_spi1_cs,
.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
};
#endif
/* GPIO-keys input device */
static struct gpio_keys_button pcm037_gpio_keys[] = {
{
.type = EV_KEY,
.code = KEY_L,
.gpio = 0,
.desc = "Wheel Manual",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_A,
.gpio = 1,
.desc = "Wheel AF",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_V,
.gpio = 2,
.desc = "Wheel View",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_M,
.gpio = 3,
.desc = "Wheel Menu",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_UP,
.gpio = 32,
.desc = "Nav Pad Up",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_RIGHT,
.gpio = 33,
.desc = "Nav Pad Right",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_DOWN,
.gpio = 34,
.desc = "Nav Pad Down",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_LEFT,
.gpio = 35,
.desc = "Nav Pad Left",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_ENTER,
.gpio = 38,
.desc = "Nav Pad Ok",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = KEY_O,
.gpio = 39,
.desc = "Wheel Off",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = BTN_FORWARD,
.gpio = 50,
.desc = "Focus Forward",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = BTN_BACK,
.gpio = 51,
.desc = "Focus Backward",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = BTN_MIDDLE,
.gpio = 52,
.desc = "Release Half",
.wakeup = 0,
}, {
.type = EV_KEY,
.code = BTN_EXTRA,
.gpio = 53,
.desc = "Release Full",
.wakeup = 0,
},
};
static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
.buttons = pcm037_gpio_keys,
.nbuttons = ARRAY_SIZE(pcm037_gpio_keys),
.rep = 0, /* No auto-repeat */
};
static struct platform_device pcm037_gpio_keys_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &pcm037_gpio_keys_platform_data,
},
};
static int eet_init_devices(void)
{
if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
return 0;
mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
/* SPI */
spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
#endif
platform_device_register(&pcm037_gpio_keys_device);
return 0;
}
late_initcall(eet_init_devices);

View File

@ -19,7 +19,6 @@
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/cpu.h>
#include <mach/mcbsp.h>

View File

@ -25,6 +25,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl4030.h>
#include <linux/usb/otg.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@ -307,6 +308,10 @@ static void __init omap3_evm_init(void)
ARRAY_SIZE(omap3evm_spi_board_info));
omap_serial_init();
#ifdef CONFIG_NOP_USB_XCEIV
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
#endif
usb_musb_init();
ads7846_dev_init();
}

View File

@ -19,7 +19,6 @@
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/cpu.h>
#include <mach/mcbsp.h>

View File

@ -155,20 +155,6 @@ static struct platform_device musb_device = {
.resource = musb_resources,
};
#ifdef CONFIG_NOP_USB_XCEIV
static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
static struct platform_device nop_xceiv_device = {
.name = "nop_usb_xceiv",
.id = -1,
.dev = {
.dma_mask = &nop_xceiv_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = NULL,
},
};
#endif
void __init usb_musb_init(void)
{
if (cpu_is_omap243x())
@ -183,13 +169,6 @@ void __init usb_musb_init(void)
*/
musb_plat.clock = "ick";
#ifdef CONFIG_NOP_USB_XCEIV
if (platform_device_register(&nop_xceiv_device) < 0) {
printk(KERN_ERR "Unable to register NOP-XCEIV device\n");
return;
}
#endif
if (platform_device_register(&musb_device) < 0) {
printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
return;

View File

@ -1141,12 +1141,16 @@ struct power_supply_info em_x270_psy_info = {
static void em_x270_battery_low(void)
{
#if defined(CONFIG_APM_EMULATION)
apm_queue_event(APM_LOW_BATTERY);
#endif
}
static void em_x270_battery_critical(void)
{
#if defined(CONFIG_APM_EMULATION)
apm_queue_event(APM_CRITICAL_SUSPEND);
#endif
}
struct da9030_battery_info em_x270_batterty_info = {

View File

@ -567,9 +567,9 @@
#define GPIO37_ULPI_DATA_OUT_7 MFP_CFG(GPIO37, AF3)
#define GPIO33_ULPI_OTG_INTR MFP_CFG(GPIO33, AF1)
#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
#define ULPI_STP MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
#define ULPI_DIR MFP_CFG_DRV(ULPI_DIR, AF0, DS01X)
#define ULPI_NXT MFP_CFG_DRV(ULPI_NXT, AF0, DS01X)
#define ULPI_STP MFP_CFG_DRV(ULPI_STP, AF0, DS01X)
#endif /* CONFIG_CPU_PXA310 */
#endif /* __ASM_ARCH_MFP_PXA300_H */

View File

@ -128,6 +128,10 @@ static unsigned long palmld_pin_config[] __initdata = {
GPIO38_GPIO, /* wifi ready */
GPIO81_GPIO, /* wifi reset */
/* FFUART */
GPIO34_FFUART_RXD,
GPIO39_FFUART_TXD,
/* HDD */
GPIO98_GPIO, /* HDD reset */
GPIO115_GPIO, /* HDD power */

View File

@ -111,6 +111,10 @@ static unsigned long palmt5_pin_config[] __initdata = {
/* PWM */
GPIO16_PWM0_OUT,
/* FFUART */
GPIO34_FFUART_RXD,
GPIO39_FFUART_TXD,
/* MISC */
GPIO10_GPIO, /* hotsync button */
GPIO90_GPIO, /* power detect */

View File

@ -127,6 +127,10 @@ static unsigned long palmtx_pin_config[] __initdata = {
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
/* FFUART */
GPIO34_FFUART_RXD,
GPIO39_FFUART_TXD,
/* MISC. */
GPIO10_GPIO, /* hotsync button */
GPIO12_GPIO, /* power detect */

View File

@ -250,7 +250,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
static struct clk_lookup pxa3xx_clkregs[] = {
INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
/* Power I2C clock is always on */
INIT_CLKREG(&clk_dummy, "pxa2xx-i2c.1", NULL),
INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),

View File

@ -409,7 +409,7 @@ err1:
static void treo680_irda_shutdown(struct device *dev)
{
gpio_free(GPIO_NR_TREO680_AMP_EN);
gpio_free(GPIO_NR_TREO680_IR_EN);
}
static struct pxaficp_platform_data treo680_ficp_info = {

View File

@ -197,10 +197,12 @@ static void __init zylonite_detect_lcd_panel(void)
for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
id = id << 1;
gpio = mfp_to_gpio(lcd_detect_pins[i]);
gpio_request(gpio, "LCD_ID_PINS");
gpio_direction_input(gpio);
if (gpio_get_value(gpio))
id = id | 0x1;
gpio_free(gpio);
}
/* lcd id, flush out bit 1 */

View File

@ -176,10 +176,12 @@ static void __init zylonite_detect_lcd_panel(void)
for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
id = id << 1;
gpio = mfp_to_gpio(lcd_detect_pins[i]);
gpio_request(gpio, "LCD_ID_PINS");
gpio_direction_input(gpio);
if (gpio_get_value(gpio))
id = id | 0x1;
gpio_free(gpio);
}
/* lcd id, flush out bit 1 */

View File

@ -208,8 +208,7 @@ struct platform_device realview_i2c_device = {
static struct i2c_board_info realview_i2c_board_info[] = {
{
I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
.type = "ds1338",
I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
},
};

View File

@ -28,7 +28,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
return NULL;
chip = &s3c24xx_gpios[pin/32];
return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL;
return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL;
}
#endif /* __ASM_ARCH_GPIO_CORE_H */

View File

@ -455,8 +455,8 @@ void __init u300_init_irq(void)
for (i = 0; i < NR_IRQS; i++)
set_bit(i, (unsigned long *) &mask[0]);
u300_enable_intcon_clock();
vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0);
vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0);
vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
}

View File

@ -342,8 +342,7 @@ static struct platform_device versatile_i2c_device = {
static struct i2c_board_info versatile_i2c_board_info[] = {
{
I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
.type = "ds1338",
I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
},
};

View File

@ -602,6 +602,8 @@ enum iomux_pins {
#define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
#define MX31_PIN_CSPI2_SS2__I2C3_SDA IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI2_SCLK__I2C3_SCL IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)

View File

@ -16,7 +16,7 @@
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/sysdev.h>
#include <linux/bootmem.h>
#include <linux/slab.h>
#include <mach/gpio.h>
@ -112,17 +112,12 @@ static int __init pxa_init_gpio_chip(int gpio_end)
int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
struct pxa_gpio_chip *chips;
/* this is early, we have to use bootmem allocator, and we really
* want this to be allocated dynamically for different 'gpio_end'
*/
chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip));
chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL);
if (chips == NULL) {
pr_err("%s: failed to allocate GPIO chips\n", __func__);
return -ENOMEM;
}
memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip));
for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
struct gpio_chip *c = &chips[i].chip;

View File

@ -246,6 +246,10 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
tcmp = duty_ns / tin_ns;
tcmp = tcnt - tcmp;
/* the pwm hw only checks the compare register after a decrement,
so the pin never toggles if tcmp = tcnt */
if (tcmp == tcnt)
tcmp--;
pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);

View File

@ -117,8 +117,6 @@ void s3c_pm_save_core(void)
* this.
*/
#include <plat/regs-gpio.h>
static void s3c64xx_cpu_suspend(void)
{
unsigned long tmp;

View File

@ -153,7 +153,7 @@ static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
u32 div;
if (parent < rate)
return rate;
return parent;
div = (parent / rate) - 1;
if (div > armclk_mask)
@ -175,7 +175,7 @@ static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
div = clk_get_rate(clk->parent) / rate;
val = __raw_readl(S3C_CLK_DIV0);
val &= armclk_mask;
val &= ~armclk_mask;
val |= (div - 1);
__raw_writel(val, S3C_CLK_DIV0);

View File

@ -22,7 +22,6 @@
#include <linux/sysdev.h>
#include <linux/string.h>
#include <linux/bitops.h>
#include <linux/sysdev.h>
#include <linux/irq.h>
#include <mach/hardware.h>

View File

@ -83,7 +83,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
quicklist_free_page(QUICK_PT, NULL, pte);
}
#define __pte_free_tlb(tlb,pte) \
#define __pte_free_tlb(tlb,pte,addr) \
do { \
pgtable_page_dtor(pte); \
tlb_remove_page((tlb), pte); \

View File

@ -223,9 +223,10 @@
[--sp] = RETN;
[--sp] = RETE;
[--sp] = SEQSTAT;
#ifdef CONFIG_KGDB
r1.l = lo(IPEND);
r1.h = hi(IPEND);
#ifdef CONFIG_DEBUG_KERNEL
p1.l = lo(IPEND);
p1.h = hi(IPEND);
r1 = [p1];
[--sp] = r1;
#else
[--sp] = r0; /* Skip IPEND as well. */

View File

@ -32,7 +32,6 @@ struct blackfin_cpudata {
struct task_struct *idle;
unsigned int imemctl;
unsigned int dmemctl;
unsigned long loops_per_jiffy;
unsigned long dcache_invld_count;
unsigned long icache_invld_count;
};

View File

@ -6,6 +6,9 @@
extern void ack_bad_irq(unsigned int irq);
#define ack_bad_irq ack_bad_irq
/* Define until common code gets sane defaults */
#define HARDIRQ_BITS 9
#include <asm-generic/hardirq.h>
#endif

View File

@ -105,23 +105,16 @@ static inline uint32_t __pure bfin_revid(void)
/* Always use CHIPID, to work around ANOMALY_05000234 */
uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28;
#ifdef CONFIG_BF52x
/* ANOMALY_05000357
#ifdef _BOOTROM_GET_DXE_ADDRESS_TWI
/*
* ANOMALY_05000364
* Incorrect Revision Number in DSPID Register
*/
if (revid == 0)
switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) {
case 0x0010:
revid = 0;
break;
case 0x2796:
revid = 1;
break;
default:
revid = 0xFFFF;
break;
}
if (ANOMALY_05000364 &&
bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI) == 0x2796)
revid = 1;
#endif
return revid;
}

View File

@ -253,32 +253,31 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size)
BUG_ON(src % 4);
BUG_ON(size % 4);
src_ch = 0;
/* Find an avalible memDMA channel */
while (1) {
if (src_ch == (struct dma_register *)MDMA_S0_NEXT_DESC_PTR) {
dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
} else {
dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
}
if (!bfin_read16(&src_ch->cfg))
break;
else if (bfin_read16(&dst_ch->irq_status) & DMA_DONE) {
bfin_write16(&src_ch->cfg, 0);
break;
}
}
/* Force a sync in case a previous config reset on this channel
* occurred. This is needed so subsequent writes to DMA registers
* are not spuriously lost/corrupted.
*/
__builtin_bfin_ssync();
src_ch = 0;
/* Find an avalible memDMA channel */
while (1) {
if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) {
dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
} else {
dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
}
if (!bfin_read16(&src_ch->cfg)) {
break;
} else {
if (bfin_read16(&src_ch->irq_status) & DMA_DONE)
bfin_write16(&src_ch->cfg, 0);
}
}
/* Destination */
bfin_write32(&dst_ch->start_addr, dst);
bfin_write16(&dst_ch->x_count, size >> 2);

View File

@ -686,14 +686,12 @@ void bfin_gpio_pm_hibernate_restore(void)
*port_fer[bank] = gpio_bank_saved[bank].fer;
#endif
gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
gpio_array[bank]->data_set = gpio_bank_saved[bank].data
& gpio_bank_saved[bank].dir;
gpio_array[bank]->dir = gpio_bank_saved[bank].dir;
gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
gpio_array[bank]->edge = gpio_bank_saved[bank].edge;
gpio_array[bank]->both = gpio_bank_saved[bank].both;
gpio_array[bank]->data_set = gpio_bank_saved[bank].data
| gpio_bank_saved[bank].dir;
gpio_array[bank]->maska = gpio_bank_saved[bank].maska;
}
AWA_DUMMY_READ(maska);

View File

@ -72,13 +72,24 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
}
/* Cover L1 memory. One 4M area for code and data each is enough. */
if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
d_tbl[i_d].addr = L1_DATA_A_START;
d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
if (cpu == 0) {
if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
d_tbl[i_d].addr = L1_DATA_A_START;
d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
}
i_tbl[i_i].addr = L1_CODE_START;
i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
}
i_tbl[i_i].addr = L1_CODE_START;
i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
#ifdef CONFIG_SMP
else {
if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
d_tbl[i_d].addr = COREB_L1_DATA_A_START;
d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
}
i_tbl[i_i].addr = COREB_L1_CODE_START;
i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
}
#endif
first_switched_dcplb = i_d;
first_switched_icplb = i_i;

View File

@ -361,7 +361,7 @@ static inline
int in_mem_const(unsigned long addr, unsigned long size,
unsigned long const_addr, unsigned long const_size)
{
return in_mem_const_off(addr, 0, size, const_addr, const_size);
return in_mem_const_off(addr, size, 0, const_addr, const_size);
}
#define IN_ASYNC(bnum, bctlnum) \
({ \
@ -390,13 +390,13 @@ int bfin_mem_access_type(unsigned long addr, unsigned long size)
if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
#ifdef COREB_L1_CODE_START
if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
#endif
if (in_mem_const(addr, size, L2_START, L2_LENGTH))
@ -472,13 +472,13 @@ int _access_ok(unsigned long addr, unsigned long size)
if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH))
return 1;
#ifdef COREB_L1_CODE_START
if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
return 1;
if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
return 1;
if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
return 1;
if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
return 1;
#endif
if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH))

View File

@ -168,7 +168,6 @@ void __cpuinit bfin_setup_cpudata(unsigned int cpu)
struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu);
cpudata->idle = current;
cpudata->loops_per_jiffy = loops_per_jiffy;
cpudata->imemctl = bfin_read_IMEM_CONTROL();
cpudata->dmemctl = bfin_read_DMEM_CONTROL();
}
@ -568,17 +567,23 @@ static __init void memory_setup(void)
# endif /* ANOMALY_05000263 */
# endif /* CONFIG_ROMFS_FS */
memory_end -= mtd_size;
/* Since the default MTD_UCLINUX has no magic number, we just blindly
* read 8 past the end of the kernel's image, and look at it.
* When no image is attached, mtd_size is set to a random number
* Do some basic sanity checks before operating on things
*/
if (mtd_size == 0 || memory_end <= mtd_size) {
pr_emerg("Could not find valid ram mtd attached.\n");
} else {
memory_end -= mtd_size;
if (mtd_size == 0) {
console_init();
panic("Don't boot kernel without rootfs attached.");
/* Relocate MTD image to the top of memory after the uncached memory area */
uclinux_ram_map.phys = memory_mtd_start = memory_end;
uclinux_ram_map.size = mtd_size;
pr_info("Found mtd parition at 0x%p, (len=0x%lx), moving to 0x%p\n",
_end, mtd_size, (void *)memory_mtd_start);
dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
}
/* Relocate MTD image to the top of memory after the uncached memory area */
uclinux_ram_map.phys = memory_mtd_start = memory_end;
uclinux_ram_map.size = mtd_size;
dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
#endif /* CONFIG_MTD_UCLINUX */
#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
@ -868,13 +873,6 @@ void __init setup_arch(char **cmdline_p)
else
printk(KERN_CONT "and Disabled\n");
#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
/* we need to initialize the Flashrom device here since we might
* do things with flash early on in the boot
*/
flash_probe();
#endif
printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF);
/* Newer parts mirror SWRST bits in SYSCR */
@ -938,10 +936,6 @@ void __init setup_arch(char **cmdline_p)
CPU, bfin_revid());
}
/* We can't run on BF548-0.1 due to ANOMALY 05000448 */
if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
panic("You can't run on this processor due to 05000448");
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@ -1164,9 +1158,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
sclk/1000000, sclk%1000000);
seq_printf(m, "bogomips\t: %lu.%02lu\n"
"Calibration\t: %lu loops\n",
(cpudata->loops_per_jiffy * HZ) / 500000,
((cpudata->loops_per_jiffy * HZ) / 5000) % 100,
(cpudata->loops_per_jiffy * HZ));
(loops_per_jiffy * HZ) / 500000,
((loops_per_jiffy * HZ) / 5000) % 100,
(loops_per_jiffy * HZ));
/* Check Cache configutation */
switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) {

View File

@ -570,11 +570,12 @@ asmlinkage void trap_c(struct pt_regs *fp)
if (kernel_mode_regs(fp) || (current && !current->mm)) {
console_verbose();
oops_in_progress = 1;
if (strerror)
verbose_printk(strerror);
}
if (sig != SIGTRAP) {
if (strerror)
verbose_printk(strerror);
dump_bfin_process(fp);
dump_bfin_mem(fp);
show_regs(fp);
@ -619,7 +620,9 @@ asmlinkage void trap_c(struct pt_regs *fp)
force_sig_info(sig, &info, current);
}
if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8))
if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) ||
(ANOMALY_05000281 && trapnr == VEC_HWERR) ||
(ANOMALY_05000189 && (trapnr == VEC_CPLB_I_VL || trapnr == VEC_CPLB_VL)))
fp->pc = SAFE_USER_INSTRUCTION;
traps_done:

View File

@ -27,21 +27,7 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#define BITS_PER_UNIT 8
typedef int SItype __attribute__ ((mode(SI)));
typedef unsigned int USItype __attribute__ ((mode(SI)));
typedef int DItype __attribute__ ((mode(DI)));
typedef int word_type __attribute__ ((mode(__word__)));
struct DIstruct {
SItype high, low;
};
typedef union {
struct DIstruct s;
DItype ll;
} DIunion;
#include "gcclib.h"
#ifdef CONFIG_ARITHMETIC_OPS_L1
DItype __lshrdi3(DItype u, word_type b)__attribute__((l1_text));

View File

@ -534,7 +534,7 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},

View File

@ -82,6 +82,7 @@
#define ANOMALY_05000179 (0)
#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
@ -117,6 +118,7 @@
#define ANOMALY_05000357 (0)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
#define ANOMALY_05000364 (0)
#define ANOMALY_05000371 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (0)

View File

@ -53,7 +53,7 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

View File

@ -793,7 +793,7 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
.type = "pcf8574_lcd",

View File

@ -591,7 +591,7 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},

View File

@ -858,7 +858,7 @@ static struct platform_device i2c_bfin_twi_device = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},

View File

@ -176,6 +176,8 @@
#define ANOMALY_05000443 (1)
/* The WURESET Bit in the SYSCR Register is not Functional */
#define ANOMALY_05000445 (1)
/* USB DMA Short Packet Data Corruption */
#define ANOMALY_05000450 (1)
/* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
#define ANOMALY_05000451 (1)
/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
@ -201,6 +203,7 @@
#define ANOMALY_05000179 (0)
#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
@ -238,6 +241,5 @@
#define ANOMALY_05000412 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
#define ANOMALY_05000450 (0)
#endif

View File

@ -53,7 +53,7 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

View File

@ -453,7 +453,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
.irq = 39,
},
#endif
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},

View File

@ -335,6 +335,7 @@
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (1)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000389 (0)

View File

@ -53,7 +53,7 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

View File

@ -1313,10 +1313,10 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
{
I2C_BOARD_INFO("ad7142_joystick", 0x2C),
.irq = IRQ_PF5,
.irq = IRQ_PG5,
},
#endif
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},

View File

@ -167,6 +167,7 @@
#define ANOMALY_05000179 (0)
#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
@ -186,6 +187,7 @@
#define ANOMALY_05000353 (1)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000389 (0)

View File

@ -53,7 +53,7 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

View File

@ -137,6 +137,7 @@
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
#define ANOMALY_05000182 (0)
#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
@ -160,6 +161,7 @@
#define ANOMALY_05000353 (1)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
#define ANOMALY_05000364 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (1)
#define ANOMALY_05000389 (0)

Some files were not shown because too many files have changed in this diff Show More