sh: Remove SH5-based Cayman platform

Since the removal of core support for SH5, Cayman support can no longer
be selected.

Fixes: 37744feebc ("sh: remove sh5 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>
This commit is contained in:
Geert Uytterhoeven 2020-06-17 08:55:38 +02:00 committed by Rich Felker
parent 7dfaa9ea56
commit 8a8e54625b
11 changed files with 2 additions and 540 deletions

View file

@ -123,8 +123,8 @@ config ARCH_HAS_ILOG2_U64
config NO_IOPORT_MAP
def_bool !PCI
depends on !SH_CAYMAN && !SH_SH4202_MICRODEV && !SH_SHMIN && \
!SH_HP6XX && !SH_SOLUTION_ENGINE
depends on !SH_SH4202_MICRODEV && !SH_SHMIN && !SH_HP6XX && \
!SH_SOLUTION_ENGINE
config IO_TRAPPED
bool
@ -726,7 +726,6 @@ config ZERO_PAGE_OFFSET
config BOOT_LINK_OFFSET
hex
default "0x00210000" if SH_SHMIN
default "0x00400000" if SH_CAYMAN
default "0x00810000" if SH_7780_SOLUTION_ENGINE
default "0x009e0000" if SH_TITAN
default "0x01800000" if SH_SDK7780

View file

@ -15,11 +15,7 @@ ifneq ($(SUBARCH),$(ARCH))
endif
endif
ifeq ($(ARCH),sh)
KBUILD_DEFCONFIG := shx3_defconfig
else
KBUILD_DEFCONFIG := cayman_defconfig
endif
isa-y := any
isa-$(CONFIG_SH_DSP) := sh
@ -143,7 +139,6 @@ machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp
machdir-$(CONFIG_SH_SH4202_MICRODEV) += mach-microdev
machdir-$(CONFIG_SH_LANDISK) += mach-landisk
machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2
machdir-$(CONFIG_SH_CAYMAN) += mach-cayman
machdir-$(CONFIG_SH_RSK) += mach-rsk
ifneq ($(machdir-y),)

View file

@ -340,12 +340,6 @@ config SH_MAGIC_PANEL_R2
help
Select Magic Panel R2 if configuring for Magic Panel R2.
config SH_CAYMAN
bool "Hitachi Cayman"
depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
select HAVE_PCI
select ARCH_MIGHT_HAVE_PC_SERIO
config SH_POLARIS
bool "SMSC Polaris"
select CPU_HAS_IPR_IRQ

View file

@ -1,5 +0,0 @@
# SPDX-License-Identifier: GPL-2.0
#
# Makefile for the Hitachi Cayman specific parts of the kernel
#
obj-y := setup.o irq.o panic.o

View file

@ -1,148 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
/*
* arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support
*
* This file handles the board specific parts of the Cayman interrupt system
*
* Copyright (C) 2002 Stuart Menefy
*/
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/signal.h>
#include <cpu/irq.h>
#include <asm/page.h>
/* Setup for the SMSC FDC37C935 / LAN91C100FD */
#define SMSC_IRQ IRQ_IRL1
/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
#define PCI2_IRQ IRQ_IRL3
unsigned long epld_virt;
#define EPLD_BASE 0x04002000
#define EPLD_STATUS_BASE (epld_virt + 0x10)
#define EPLD_MASK_BASE (epld_virt + 0x20)
/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto
the same SH-5 interrupt */
static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id)
{
printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n");
return IRQ_NONE;
}
static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id)
{
printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq);
return IRQ_NONE;
}
static void enable_cayman_irq(struct irq_data *data)
{
unsigned int irq = data->irq;
unsigned long flags;
unsigned long mask;
unsigned int reg;
unsigned char bit;
irq -= START_EXT_IRQS;
reg = EPLD_MASK_BASE + ((irq / 8) << 2);
bit = 1<<(irq % 8);
local_irq_save(flags);
mask = __raw_readl(reg);
mask |= bit;
__raw_writel(mask, reg);
local_irq_restore(flags);
}
static void disable_cayman_irq(struct irq_data *data)
{
unsigned int irq = data->irq;
unsigned long flags;
unsigned long mask;
unsigned int reg;
unsigned char bit;
irq -= START_EXT_IRQS;
reg = EPLD_MASK_BASE + ((irq / 8) << 2);
bit = 1<<(irq % 8);
local_irq_save(flags);
mask = __raw_readl(reg);
mask &= ~bit;
__raw_writel(mask, reg);
local_irq_restore(flags);
}
struct irq_chip cayman_irq_type = {
.name = "Cayman-IRQ",
.irq_unmask = enable_cayman_irq,
.irq_mask = disable_cayman_irq,
};
int cayman_irq_demux(int evt)
{
int irq = intc_evt_to_irq[evt];
if (irq == SMSC_IRQ) {
unsigned long status;
int i;
status = __raw_readl(EPLD_STATUS_BASE) &
__raw_readl(EPLD_MASK_BASE) & 0xff;
if (status == 0) {
irq = -1;
} else {
for (i=0; i<8; i++) {
if (status & (1<<i))
break;
}
irq = START_EXT_IRQS + i;
}
}
if (irq == PCI2_IRQ) {
unsigned long status;
int i;
status = __raw_readl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
__raw_readl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
if (status == 0) {
irq = -1;
} else {
for (i=0; i<8; i++) {
if (status & (1<<i))
break;
}
irq = START_EXT_IRQS + (3 * 8) + i;
}
}
return irq;
}
void init_cayman_irq(void)
{
int i;
epld_virt = (unsigned long)ioremap(EPLD_BASE, 1024);
if (!epld_virt) {
printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
return;
}
for (i = 0; i < NR_EXT_IRQS; i++) {
irq_set_chip_and_handler(START_EXT_IRQS + i,
&cayman_irq_type, handle_level_irq);
}
/* Setup the SMSC interrupt */
if (request_irq(SMSC_IRQ, cayman_interrupt_smsc, 0, "Cayman SMSC Mux",
NULL))
pr_err("Failed to register Cayman SMSC Mux interrupt\n");
if (request_irq(PCI2_IRQ, cayman_interrupt_pci2, 0, "Cayman PCI2 Mux",
NULL))
pr_err("Failed to register Cayman PCI2 Mux interrupt\n");
}

View file

@ -1,46 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2003 Richard Curnow, SuperH UK Limited
*/
#include <linux/kernel.h>
#include <linux/io.h>
#include <cpu/registers.h>
/* THIS IS A PHYSICAL ADDRESS */
#define HDSP2534_ADDR (0x04002100)
static void poor_mans_delay(void)
{
int i;
for (i = 0; i < 2500000; i++)
cpu_relax();
}
static void show_value(unsigned long x)
{
int i;
unsigned nibble;
for (i = 0; i < 8; i++) {
nibble = ((x >> (i * 4)) & 0xf);
__raw_writeb(nibble + ((nibble > 9) ? 55 : 48),
HDSP2534_ADDR + 0xe0 + ((7 - i) << 2));
}
}
void
panic_handler(unsigned long panicPC, unsigned long panicSSR,
unsigned long panicEXPEVT)
{
while (1) {
/* This piece of code displays the PC on the LED display */
show_value(panicPC);
poor_mans_delay();
show_value(panicSSR);
poor_mans_delay();
show_value(panicEXPEVT);
poor_mans_delay();
}
}

View file

@ -1,181 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
/*
* arch/sh/mach-cayman/setup.c
*
* SH5 Cayman support
*
* Copyright (C) 2002 David J. Mckay & Benedict Gaster
* Copyright (C) 2003 - 2007 Paul Mundt
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <cpu/irq.h>
/*
* Platform Dependent Interrupt Priorities.
*/
/* Using defaults defined in irq.h */
#define RES NO_PRIORITY /* Disabled */
#define IR0 IRL0_PRIORITY /* IRLs */
#define IR1 IRL1_PRIORITY
#define IR2 IRL2_PRIORITY
#define IR3 IRL3_PRIORITY
#define PCA INTA_PRIORITY /* PCI Ints */
#define PCB INTB_PRIORITY
#define PCC INTC_PRIORITY
#define PCD INTD_PRIORITY
#define SER TOP_PRIORITY
#define ERR TOP_PRIORITY
#define PW0 TOP_PRIORITY
#define PW1 TOP_PRIORITY
#define PW2 TOP_PRIORITY
#define PW3 TOP_PRIORITY
#define DM0 NO_PRIORITY /* DMA Ints */
#define DM1 NO_PRIORITY
#define DM2 NO_PRIORITY
#define DM3 NO_PRIORITY
#define DAE NO_PRIORITY
#define TU0 TIMER_PRIORITY /* TMU Ints */
#define TU1 NO_PRIORITY
#define TU2 NO_PRIORITY
#define TI2 NO_PRIORITY
#define ATI NO_PRIORITY /* RTC Ints */
#define PRI NO_PRIORITY
#define CUI RTC_PRIORITY
#define ERI SCIF_PRIORITY /* SCIF Ints */
#define RXI SCIF_PRIORITY
#define BRI SCIF_PRIORITY
#define TXI SCIF_PRIORITY
#define ITI TOP_PRIORITY /* WDT Ints */
/* Setup for the SMSC FDC37C935 */
#define SMSC_SUPERIO_BASE 0x04000000
#define SMSC_CONFIG_PORT_ADDR 0x3f0
#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR
#define SMSC_DATA_PORT_ADDR 0x3f1
#define SMSC_ENTER_CONFIG_KEY 0x55
#define SMSC_EXIT_CONFIG_KEY 0xaa
#define SMCS_LOGICAL_DEV_INDEX 0x07
#define SMSC_DEVICE_ID_INDEX 0x20
#define SMSC_DEVICE_REV_INDEX 0x21
#define SMSC_ACTIVATE_INDEX 0x30
#define SMSC_PRIMARY_BASE_INDEX 0x60
#define SMSC_SECONDARY_BASE_INDEX 0x62
#define SMSC_PRIMARY_INT_INDEX 0x70
#define SMSC_SECONDARY_INT_INDEX 0x72
#define SMSC_IDE1_DEVICE 1
#define SMSC_KEYBOARD_DEVICE 7
#define SMSC_CONFIG_REGISTERS 8
#define SMSC_SUPERIO_READ_INDEXED(index) ({ \
outb((index), SMSC_INDEX_PORT_ADDR); \
inb(SMSC_DATA_PORT_ADDR); })
#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \
outb((index), SMSC_INDEX_PORT_ADDR); \
outb((val), SMSC_DATA_PORT_ADDR); })
#define IDE1_PRIMARY_BASE 0x01f0
#define IDE1_SECONDARY_BASE 0x03f6
unsigned long smsc_superio_virt;
int platform_int_priority[NR_INTC_IRQS] = {
IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */
RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */
PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */
RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */
TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */
RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */
RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */
RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */
};
static int __init smsc_superio_setup(void)
{
unsigned char devid, devrev;
smsc_superio_virt = (unsigned long)ioremap(SMSC_SUPERIO_BASE, 1024);
if (!smsc_superio_virt) {
panic("Unable to remap SMSC SuperIO\n");
}
/* Initially the chip is in run state */
/* Put it into configuration state */
outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
/* Read device ID info */
devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev);
/* Select the keyboard device */
SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
/* enable it */
SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
/* Select the interrupts */
/* On a PC keyboard is IRQ1, mouse is IRQ12 */
SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
/*
* Only IDE1 exists on the Cayman
*/
/* Power it on */
SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22);
SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8,
SMSC_PRIMARY_BASE_INDEX + 0);
SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff,
SMSC_PRIMARY_BASE_INDEX + 1);
SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8,
SMSC_SECONDARY_BASE_INDEX + 0);
SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff,
SMSC_SECONDARY_BASE_INDEX + 1);
SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX);
SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS,
SMCS_LOGICAL_DEV_INDEX);
SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
/* Exit the configuration state */
outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
return 0;
}
device_initcall(smsc_superio_setup);
static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
{
if (port < 0x400) {
extern unsigned long smsc_superio_virt;
return (void __iomem *)((port << 2) | smsc_superio_virt);
}
return (void __iomem *)port;
}
extern void init_cayman_irq(void);
static struct sh_machine_vector mv_cayman __initmv = {
.mv_name = "Hitachi Cayman",
.mv_ioport_map = cayman_ioport_map,
.mv_init_irq = init_cayman_irq,
};

View file

@ -1,66 +0,0 @@
CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_MEMORY_START=0x80000000
CONFIG_MEMORY_SIZE=0x00400000
CONFIG_FLATMEM_MANUAL=y
CONFIG_CACHE_OFF=y
CONFIG_SH_PCLK_FREQ=50000000
CONFIG_HEARTBEAT=y
CONFIG_PREEMPT=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
# CONFIG_IPV6 is not set
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_HW_RANDOM=y
CONFIG_I2C=m
CONFIG_WATCHDOG=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_SH_MOBILE_LCDC=m
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_MINIX_FS=y
CONFIG_ROMFS_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_SCHEDSTATS=y
CONFIG_FRAME_POINTER=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set

View file

@ -25,4 +25,3 @@ obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o
obj-$(CONFIG_SH_TITAN) += fixups-titan.o
obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o
obj-$(CONFIG_SH_LBOX_RE2) += fixups-rts7751r2d.o
obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o

View file

@ -1,78 +0,0 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/types.h>
#include <cpu/irq.h>
#include "pci-sh5.h"
int pcibios_map_platform_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int result = -1;
/* The complication here is that the PCI IRQ lines from the Cayman's 2
5V slots get into the CPU via a different path from the IRQ lines
from the 3 3.3V slots. Thus, we have to detect whether the card's
interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling'
at the point where we cross from 5V to 3.3V is not the normal case.
The added complication is that we don't know that the 5V slots are
always bus 2, because a card containing a PCI-PCI bridge may be
plugged into a 3.3V slot, and this changes the bus numbering.
Also, the Cayman has an intermediate PCI bus that goes a custom
expansion board header (and to the secondary bridge). This bus has
never been used in practice.
The 1ary onboard PCI-PCI bridge is device 3 on bus 0
The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of
the 1ary bridge.
*/
struct slot_pin {
int slot;
int pin;
} path[4];
int i=0;
while (dev->bus->number > 0) {
slot = path[i].slot = PCI_SLOT(dev->devfn);
pin = path[i].pin = pci_swizzle_interrupt_pin(dev, pin);
dev = dev->bus->self;
i++;
if (i > 3) panic("PCI path to root bus too long!\n");
}
slot = PCI_SLOT(dev->devfn);
/* This is the slot on bus 0 through which the device is eventually
reachable. */
/* Now work back up. */
if ((slot < 3) || (i == 0)) {
/* Bus 0 (incl. PCI-PCI bridge itself) : perform the final
swizzle now. */
result = IRQ_INTA + pci_swizzle_interrupt_pin(dev, pin) - 1;
} else {
i--;
slot = path[i].slot;
pin = path[i].pin;
if (slot > 0) {
panic("PCI expansion bus device found - not handled!\n");
} else {
if (i > 0) {
/* 5V slots */
i--;
slot = path[i].slot;
pin = path[i].pin;
/* 'pin' was swizzled earlier wrt slot, don't do it again. */
result = IRQ_P2INTA + (pin - 1);
} else {
/* IRQ for 2ary PCI-PCI bridge : unused */
result = -1;
}
}
}
return result;
}

View file

@ -46,7 +46,6 @@ X3PROTO SH_X3PROTO
MAGICPANELR2 SH_MAGIC_PANEL_R2
R2D_PLUS RTS7751R2D_PLUS
R2D_1 RTS7751R2D_1
CAYMAN SH_CAYMAN
SDK7780 SH_SDK7780
MIGOR SH_MIGOR
RSK7201 SH_RSK7201