phy: rockchip: set pulldown for strobe line in dts

This patch add support to set the internal pulldown via dt property
and allow simplify the board design for the trace from emmc-phy to
the eMMC chipset.
Default to not set the pull-down.

This patch was inspired from the 4.4 tree of the
Rockchip SDK, where it is enabled unconditional.
The patch had been tested with our rk3399 customized board.

Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Link: https://lore.kernel.org/r/20201129054416.3980-2-chris.ruehl@gtsys.com.hk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Chris Ruehl 2020-11-29 13:44:14 +08:00 committed by Vinod Koul
parent 51e339deab
commit 8b5c2b45b8

View file

@ -67,6 +67,10 @@
#define PHYCTRL_OTAPDLYENA_SHIFT 0xb
#define PHYCTRL_OTAPDLYSEL_MASK 0xf
#define PHYCTRL_OTAPDLYSEL_SHIFT 0x7
#define PHYCTRL_REN_STRB_DISABLE 0x0
#define PHYCTRL_REN_STRB_ENABLE 0x1
#define PHYCTRL_REN_STRB_MASK 0x1
#define PHYCTRL_REN_STRB_SHIFT 0x9
#define PHYCTRL_IS_CALDONE(x) \
((((x) >> PHYCTRL_CALDONE_SHIFT) & \
@ -80,6 +84,7 @@ struct rockchip_emmc_phy {
struct regmap *reg_base;
struct clk *emmcclk;
unsigned int drive_impedance;
unsigned int enable_strobe_pulldown;
};
static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
@ -295,6 +300,13 @@ static int rockchip_emmc_phy_power_on(struct phy *phy)
PHYCTRL_OTAPDLYSEL_MASK,
PHYCTRL_OTAPDLYSEL_SHIFT));
/* Internal pull-down for strobe line */
regmap_write(rk_phy->reg_base,
rk_phy->reg_offset + GRF_EMMCPHY_CON2,
HIWORD_UPDATE(rk_phy->enable_strobe_pulldown,
PHYCTRL_REN_STRB_MASK,
PHYCTRL_REN_STRB_SHIFT));
/* Power up emmc phy analog blocks */
return rockchip_emmc_phy_power(phy, PHYCTRL_PDB_PWR_ON);
}
@ -359,10 +371,14 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
rk_phy->reg_offset = reg_offset;
rk_phy->reg_base = grf;
rk_phy->drive_impedance = PHYCTRL_DR_50OHM;
rk_phy->enable_strobe_pulldown = PHYCTRL_REN_STRB_DISABLE;
if (!of_property_read_u32(dev->of_node, "drive-impedance-ohm", &val))
rk_phy->drive_impedance = convert_drive_impedance_ohm(pdev, val);
if (of_property_read_bool(dev->of_node, "enable-strobe-pulldown"))
rk_phy->enable_strobe_pulldown = PHYCTRL_REN_STRB_ENABLE;
generic_phy = devm_phy_create(dev, dev->of_node, &ops);
if (IS_ERR(generic_phy)) {
dev_err(dev, "failed to create PHY\n");