From 8bc49f4489bb1a4552a10f51bc642286509a9694 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E5=91=A8=E7=90=B0=E6=9D=B0=20=28Zhou=20Yanjie=29?= Date: Mon, 16 Dec 2019 00:21:03 +0800 Subject: [PATCH] dt-bindings: pinctrl: Add bindings for Ingenic X1830. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add the pinctrl bindings for the X1830 Soc from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) Acked-by: Rob Herring Link: https://lore.kernel.org/r/1576426864-35348-6-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Linus Walleij --- .../devicetree/bindings/pinctrl/ingenic,pinctrl.txt | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt index 0014d9899797..d9b2100c98e8 100644 --- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.txt @@ -10,9 +10,9 @@ GPIO port configuration registers and it is typical to refer to pins using the naming scheme "PxN" where x is a character identifying the GPIO port with which the pin is associated and N is an integer from 0 to 31 identifying the pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and -PB31 is the last pin in GPIO port B. The jz4740 and the x1000 contains 4 GPIO -ports, PA to PD, for a total of 128 pins. The jz4760, the jz4770 and the jz4780 -contains 6 GPIO ports, PA to PF, for a total of 192 pins. +PB31 is the last pin in GPIO port B. The jz4740, the x1000 and the x1830 +contains 4 GPIO ports, PA to PD, for a total of 128 pins. The jz4760, the +jz4770 and the jz4780 contains 6 GPIO ports, PA to PF, for a total of 192 pins. Required properties: @@ -28,6 +28,7 @@ Required properties: - "ingenic,x1000-pinctrl" - "ingenic,x1000e-pinctrl" - "ingenic,x1500-pinctrl" + - "ingenic,x1830-pinctrl" - reg: Address range of the pinctrl registers. @@ -40,6 +41,7 @@ Required properties for sub-nodes (GPIO chips): - "ingenic,jz4770-gpio" - "ingenic,jz4780-gpio" - "ingenic,x1000-gpio" + - "ingenic,x1830-gpio" - reg: The GPIO bank number. - interrupt-controller: Marks the device node as an interrupt controller. - interrupts: Interrupt specifier for the controllers interrupt.