From 8bc85a871436525cc38f819bbc122d216730e905 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Tue, 25 Jul 2017 09:57:08 +0200 Subject: [PATCH] spi: loopback-test: implement testing with no CS To run spi-loopback-tests on HW without modifications, we need to disable Chip Select. This should avoid surprising side effects for SPI devices by testing patterns. Signed-off-by: Oleksij Rempel Signed-off-by: Mark Brown --- drivers/spi/spi-loopback-test.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c index 64a1e6f212c1..bed7403bb6b3 100644 --- a/drivers/spi/spi-loopback-test.c +++ b/drivers/spi/spi-loopback-test.c @@ -57,6 +57,11 @@ MODULE_PARM_DESC(loop_req, "if set controller will be asked to enable test loop mode. " \ "If controller supported it, MISO and MOSI will be connected"); +static int no_cs; +module_param(no_cs, int, 0); +MODULE_PARM_DESC(no_cs, + "if set Chip Select (CS) will not be used"); + /* run only a specific test */ static int run_only_test = -1; module_param(run_only_test, int, 0); @@ -319,11 +324,12 @@ static int spi_loopback_test_probe(struct spi_device *spi) { int ret; - if (loop_req) { - spi->mode = SPI_LOOP | spi->mode; + if (loop_req || no_cs) { + spi->mode |= loop_req ? SPI_LOOP : 0; + spi->mode |= no_cs ? SPI_NO_CS : 0; ret = spi_setup(spi); if (ret) { - dev_err(&spi->dev, "SPI setup with SPI_LOOP failed (%d)\n", + dev_err(&spi->dev, "SPI setup with SPI_LOOP or SPI_NO_CS failed (%d)\n", ret); return ret; }