phy: rockchip-inno-usb2: fix misspelling and kernel-doc documentation

Fix the typo flase -> false and clean up the kernel-doc documentation in
phy-rockchip-inno.usb2.c and fix the following warnings when documentation
is built.

  :58: warning: missing initial short description
  :69: warning: cannot understand function prototype: 'enum usb_chg_state '
  :97: warning: missing initial short description
  :136: warning: cannot understand function prototype: 'struct rockchip_usb2phy_port_cfg '
  :157: warning: cannot understand function prototype: 'struct rockchip_usb2phy_cfg '
  :163: warning: Function parameter or member 'port_cfgs' not described in 'rockchip_usb2phy_cfg'
  :187: warning: cannot understand function prototype: 'struct rockchip_usb2phy_port '
  :204: warning: Function parameter or member 'port_cfg' not described in 'rockchip_usb2phy_port'
  :207: warning: missing initial short description
  :234: warning: Function parameter or member 'dev' not described in 'rockchip_usb2phy'
  :234: warning: Function parameter or member 'clk480m_hw' not described in 'rockchip_usb2phy'

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit is contained in:
Enric Balletbo i Serra 2019-01-09 11:32:06 +01:00 committed by Kishon Vijay Abraham I
parent 6777cee3a8
commit 8fa0402ba3
1 changed files with 19 additions and 16 deletions

View File

@ -55,16 +55,16 @@ enum rockchip_usb2phy_host_state {
};
/**
* Different states involved in USB charger detection.
* USB_CHG_STATE_UNDEFINED USB charger is not connected or detection
* enum usb_chg_state - Different states involved in USB charger detection.
* @USB_CHG_STATE_UNDEFINED: USB charger is not connected or detection
* process is not yet started.
* USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact.
* USB_CHG_STATE_DCD_DONE Data pin contact is detected.
* USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects
* @USB_CHG_STATE_WAIT_FOR_DCD: Waiting for Data pins contact.
* @USB_CHG_STATE_DCD_DONE: Data pin contact is detected.
* @USB_CHG_STATE_PRIMARY_DONE: Primary detection is completed (Detects
* between SDP and DCP/CDP).
* USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects
* between DCP and CDP).
* USB_CHG_STATE_DETECTED USB charger type is determined.
* @USB_CHG_STATE_SECONDARY_DONE: Secondary detection is completed (Detects
* between DCP and CDP).
* @USB_CHG_STATE_DETECTED: USB charger type is determined.
*/
enum usb_chg_state {
USB_CHG_STATE_UNDEFINED = 0,
@ -94,7 +94,7 @@ struct usb2phy_reg {
};
/**
* struct rockchip_chg_det_reg: usb charger detect registers
* struct rockchip_chg_det_reg - usb charger detect registers
* @cp_det: charging port detected successfully.
* @dcp_det: dedicated charging port detected successfully.
* @dp_det: assert data pin connect successfully.
@ -120,7 +120,7 @@ struct rockchip_chg_det_reg {
};
/**
* struct rockchip_usb2phy_port_cfg: usb-phy port configuration.
* struct rockchip_usb2phy_port_cfg - usb-phy port configuration.
* @phy_sus: phy suspend register.
* @bvalid_det_en: vbus valid rise detection enable register.
* @bvalid_det_st: vbus valid rise detection status register.
@ -148,10 +148,11 @@ struct rockchip_usb2phy_port_cfg {
};
/**
* struct rockchip_usb2phy_cfg: usb-phy configuration.
* struct rockchip_usb2phy_cfg - usb-phy configuration.
* @reg: the address offset of grf for usb-phy config.
* @num_ports: specify how many ports that the phy has.
* @clkout_ctl: keep on/turn off output clk of phy.
* @port_cfgs: usb-phy port configurations.
* @chg_det: charger detection registers.
*/
struct rockchip_usb2phy_cfg {
@ -163,12 +164,13 @@ struct rockchip_usb2phy_cfg {
};
/**
* struct rockchip_usb2phy_port: usb-phy port data.
* struct rockchip_usb2phy_port - usb-phy port data.
* @phy: generic phy.
* @port_id: flag for otg port or host port.
* @suspended: phy suspended flag.
* @utmi_avalid: utmi avalid status usage flag.
* true - use avalid to get vbus status
* flase - use bvalid to get vbus status
* false - use bvalid to get vbus status
* @vbus_attached: otg device vbus status.
* @bvalid_irq: IRQ number assigned for vbus valid rise detection.
* @ls_irq: IRQ number assigned for linestate detection.
@ -178,7 +180,7 @@ struct rockchip_usb2phy_cfg {
* @chg_work: charge detect work.
* @otg_sm_work: OTG state machine work.
* @sm_work: HOST state machine work.
* @phy_cfg: port register configuration, assigned by driver data.
* @port_cfg: port register configuration, assigned by driver data.
* @event_nb: hold event notification callback.
* @state: define OTG enumeration states before device reset.
* @mode: the dr_mode of the controller.
@ -203,12 +205,13 @@ struct rockchip_usb2phy_port {
};
/**
* struct rockchip_usb2phy: usb2.0 phy driver data.
* struct rockchip_usb2phy - usb2.0 phy driver data.
* @dev: pointer to device.
* @grf: General Register Files regmap.
* @usbgrf: USB General Register Files regmap.
* @clk: clock struct of phy input clk.
* @clk480m: clock struct of phy output clk.
* @clk_hw: clock struct of phy output clk management.
* @clk480m_hw: clock struct of phy output clk management.
* @chg_state: states involved in USB charger detection.
* @chg_type: USB charger types.
* @dcd_retries: The retry count used to track Data contact