hwmon: (gxp-fan-ctrl) Add GXP fan controller
The GXP SoC can support up to 16 fans through the interface provided by the CPLD. The current support is limited to 8 fans. The fans speeds are controlled via 8 different PWMs which can vary in value from 0-255. The fans are also capable of reporting if they have failed to the CPLD which in turn reports the status to the GXP SoC. Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com> Link: https://lore.kernel.org/r/20230103203654.59322-2-nick.hawkins@hpe.com [groeck: Improved alignment of defined, added missing include linux/bits.h] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Nick Hawkins
Guenter Roeck
parent
6d03bbff45
commit
90905f7c40
|
|
@ -0,0 +1,28 @@
|
|||
.. SPDX-License-Identifier: GPL-2.0-only
|
||||
|
||||
Kernel driver gxp-fan-ctrl
|
||||
==========================
|
||||
|
||||
Supported chips:
|
||||
|
||||
* HPE GXP SOC
|
||||
|
||||
Author: Nick Hawkins <nick.hawkins@hpe.com>
|
||||
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
gxp-fan-ctrl is a driver which provides fan control for the hpe gxp soc.
|
||||
The driver allows the gathering of fan status and the use of fan
|
||||
PWM control.
|
||||
|
||||
|
||||
Sysfs attributes
|
||||
----------------
|
||||
|
||||
======================= ===========================================================
|
||||
pwm[0-7] Fan 0 to 7 respective PWM value (0-255)
|
||||
fan[0-7]_fault Fan 0 to 7 respective fault status: 1 fail, 0 ok
|
||||
fan[0-7]_enable Fan 0 to 7 respective enabled status: 1 enabled, 0 disabled
|
||||
======================= ===========================================================
|
||||
|
|
@ -73,6 +73,7 @@ Hardware Monitoring Kernel Drivers
|
|||
g762
|
||||
gsc-hwmon
|
||||
gl518sm
|
||||
gxp-fan-ctrl
|
||||
hih6130
|
||||
ibmaem
|
||||
ibm-cffps
|
||||
|
|
|
|||
|
|
@ -714,6 +714,15 @@ config SENSORS_GPIO_FAN
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called gpio-fan.
|
||||
|
||||
config SENSORS_GXP_FAN_CTRL
|
||||
tristate "HPE GXP fan controller"
|
||||
depends on ARCH_HPE_GXP || COMPILE_TEST
|
||||
help
|
||||
If you say yes here you get support for GXP fan control functionality.
|
||||
|
||||
The GXP controls fan function via the CPLD through the use of PWM
|
||||
registers. This driver reports status and pwm setting of the fans.
|
||||
|
||||
config SENSORS_HIH6130
|
||||
tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
|
||||
depends on I2C
|
||||
|
|
|
|||
|
|
@ -83,6 +83,7 @@ obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
|
|||
obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
|
||||
obj-$(CONFIG_SENSORS_GSC) += gsc-hwmon.o
|
||||
obj-$(CONFIG_SENSORS_GPIO_FAN) += gpio-fan.o
|
||||
obj-$(CONFIG_SENSORS_GXP_FAN_CTRL) += gxp-fan-ctrl.o
|
||||
obj-$(CONFIG_SENSORS_HIH6130) += hih6130.o
|
||||
obj-$(CONFIG_SENSORS_ULTRA45) += ultra45_env.o
|
||||
obj-$(CONFIG_SENSORS_I5500) += i5500_temp.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,255 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */
|
||||
|
||||
#include <linux/bits.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/hwmon.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#define OFS_FAN_INST 0 /* Is 0 because plreg base will be set at INST */
|
||||
#define OFS_FAN_FAIL 2 /* Is 2 bytes after base */
|
||||
#define OFS_SEVSTAT 0 /* Is 0 because fn2 base will be set at SEVSTAT */
|
||||
#define POWER_BIT 24
|
||||
|
||||
struct gxp_fan_ctrl_drvdata {
|
||||
void __iomem *base;
|
||||
void __iomem *plreg;
|
||||
void __iomem *fn2;
|
||||
};
|
||||
|
||||
static bool fan_installed(struct device *dev, int fan)
|
||||
{
|
||||
struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
|
||||
u8 val;
|
||||
|
||||
val = readb(drvdata->plreg + OFS_FAN_INST);
|
||||
|
||||
return !!(val & BIT(fan));
|
||||
}
|
||||
|
||||
static long fan_failed(struct device *dev, int fan)
|
||||
{
|
||||
struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
|
||||
u8 val;
|
||||
|
||||
val = readb(drvdata->plreg + OFS_FAN_FAIL);
|
||||
|
||||
return !!(val & BIT(fan));
|
||||
}
|
||||
|
||||
static long fan_enabled(struct device *dev, int fan)
|
||||
{
|
||||
struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
|
||||
u32 val;
|
||||
|
||||
/*
|
||||
* Check the power status as if the platform is off the value
|
||||
* reported for the PWM will be incorrect. Report fan as
|
||||
* disabled.
|
||||
*/
|
||||
val = readl(drvdata->fn2 + OFS_SEVSTAT);
|
||||
|
||||
return !!((val & BIT(POWER_BIT)) && fan_installed(dev, fan));
|
||||
}
|
||||
|
||||
static int gxp_pwm_write(struct device *dev, u32 attr, int channel, long val)
|
||||
{
|
||||
struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
|
||||
|
||||
switch (attr) {
|
||||
case hwmon_pwm_input:
|
||||
if (val > 255 || val < 0)
|
||||
return -EINVAL;
|
||||
writeb(val, drvdata->base + channel);
|
||||
return 0;
|
||||
default:
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
}
|
||||
|
||||
static int gxp_fan_ctrl_write(struct device *dev, enum hwmon_sensor_types type,
|
||||
u32 attr, int channel, long val)
|
||||
{
|
||||
switch (type) {
|
||||
case hwmon_pwm:
|
||||
return gxp_pwm_write(dev, attr, channel, val);
|
||||
default:
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
}
|
||||
|
||||
static int gxp_fan_read(struct device *dev, u32 attr, int channel, long *val)
|
||||
{
|
||||
switch (attr) {
|
||||
case hwmon_fan_enable:
|
||||
*val = fan_enabled(dev, channel);
|
||||
return 0;
|
||||
case hwmon_fan_fault:
|
||||
*val = fan_failed(dev, channel);
|
||||
return 0;
|
||||
default:
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
}
|
||||
|
||||
static int gxp_pwm_read(struct device *dev, u32 attr, int channel, long *val)
|
||||
{
|
||||
struct gxp_fan_ctrl_drvdata *drvdata = dev_get_drvdata(dev);
|
||||
u32 reg;
|
||||
|
||||
/*
|
||||
* Check the power status of the platform. If the platform is off
|
||||
* the value reported for the PWM will be incorrect. In this case
|
||||
* report a PWM of zero.
|
||||
*/
|
||||
|
||||
reg = readl(drvdata->fn2 + OFS_SEVSTAT);
|
||||
|
||||
if (reg & BIT(POWER_BIT))
|
||||
*val = fan_installed(dev, channel) ? readb(drvdata->base + channel) : 0;
|
||||
else
|
||||
*val = 0;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int gxp_fan_ctrl_read(struct device *dev, enum hwmon_sensor_types type,
|
||||
u32 attr, int channel, long *val)
|
||||
{
|
||||
switch (type) {
|
||||
case hwmon_fan:
|
||||
return gxp_fan_read(dev, attr, channel, val);
|
||||
case hwmon_pwm:
|
||||
return gxp_pwm_read(dev, attr, channel, val);
|
||||
default:
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
}
|
||||
|
||||
static umode_t gxp_fan_ctrl_is_visible(const void *_data,
|
||||
enum hwmon_sensor_types type,
|
||||
u32 attr, int channel)
|
||||
{
|
||||
umode_t mode = 0;
|
||||
|
||||
switch (type) {
|
||||
case hwmon_fan:
|
||||
switch (attr) {
|
||||
case hwmon_fan_enable:
|
||||
case hwmon_fan_fault:
|
||||
mode = 0444;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
break;
|
||||
case hwmon_pwm:
|
||||
switch (attr) {
|
||||
case hwmon_pwm_input:
|
||||
mode = 0644;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
return mode;
|
||||
}
|
||||
|
||||
static const struct hwmon_ops gxp_fan_ctrl_ops = {
|
||||
.is_visible = gxp_fan_ctrl_is_visible,
|
||||
.read = gxp_fan_ctrl_read,
|
||||
.write = gxp_fan_ctrl_write,
|
||||
};
|
||||
|
||||
static const struct hwmon_channel_info *gxp_fan_ctrl_info[] = {
|
||||
HWMON_CHANNEL_INFO(fan,
|
||||
HWMON_F_FAULT | HWMON_F_ENABLE,
|
||||
HWMON_F_FAULT | HWMON_F_ENABLE,
|
||||
HWMON_F_FAULT | HWMON_F_ENABLE,
|
||||
HWMON_F_FAULT | HWMON_F_ENABLE,
|
||||
HWMON_F_FAULT | HWMON_F_ENABLE,
|
||||
HWMON_F_FAULT | HWMON_F_ENABLE,
|
||||
HWMON_F_FAULT | HWMON_F_ENABLE,
|
||||
HWMON_F_FAULT | HWMON_F_ENABLE),
|
||||
HWMON_CHANNEL_INFO(pwm,
|
||||
HWMON_PWM_INPUT,
|
||||
HWMON_PWM_INPUT,
|
||||
HWMON_PWM_INPUT,
|
||||
HWMON_PWM_INPUT,
|
||||
HWMON_PWM_INPUT,
|
||||
HWMON_PWM_INPUT,
|
||||
HWMON_PWM_INPUT,
|
||||
HWMON_PWM_INPUT),
|
||||
NULL
|
||||
};
|
||||
|
||||
static const struct hwmon_chip_info gxp_fan_ctrl_chip_info = {
|
||||
.ops = &gxp_fan_ctrl_ops,
|
||||
.info = gxp_fan_ctrl_info,
|
||||
|
||||
};
|
||||
|
||||
static int gxp_fan_ctrl_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct gxp_fan_ctrl_drvdata *drvdata;
|
||||
struct resource *res;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct device *hwmon_dev;
|
||||
|
||||
drvdata = devm_kzalloc(dev, sizeof(struct gxp_fan_ctrl_drvdata),
|
||||
GFP_KERNEL);
|
||||
if (!drvdata)
|
||||
return -ENOMEM;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
drvdata->base = devm_ioremap_resource(&pdev->dev, res);
|
||||
if (IS_ERR(drvdata->base))
|
||||
return dev_err_probe(dev, PTR_ERR(drvdata->base),
|
||||
"failed to map base\n");
|
||||
|
||||
drvdata->plreg = devm_platform_ioremap_resource_byname(pdev,
|
||||
"pl");
|
||||
if (IS_ERR(drvdata->plreg))
|
||||
return dev_err_probe(dev, PTR_ERR(drvdata->plreg),
|
||||
"failed to map plreg\n");
|
||||
|
||||
drvdata->fn2 = devm_platform_ioremap_resource_byname(pdev,
|
||||
"fn2");
|
||||
if (IS_ERR(drvdata->fn2))
|
||||
return dev_err_probe(dev, PTR_ERR(drvdata->fn2),
|
||||
"failed to map fn2\n");
|
||||
|
||||
hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
|
||||
"hpe_gxp_fan_ctrl",
|
||||
drvdata,
|
||||
&gxp_fan_ctrl_chip_info,
|
||||
NULL);
|
||||
|
||||
return PTR_ERR_OR_ZERO(hwmon_dev);
|
||||
}
|
||||
|
||||
static const struct of_device_id gxp_fan_ctrl_of_match[] = {
|
||||
{ .compatible = "hpe,gxp-fan-ctrl", },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, gxp_fan_ctrl_of_match);
|
||||
|
||||
static struct platform_driver gxp_fan_ctrl_driver = {
|
||||
.probe = gxp_fan_ctrl_probe,
|
||||
.driver = {
|
||||
.name = "gxp-fan-ctrl",
|
||||
.of_match_table = gxp_fan_ctrl_of_match,
|
||||
},
|
||||
};
|
||||
module_platform_driver(gxp_fan_ctrl_driver);
|
||||
|
||||
MODULE_AUTHOR("Nick Hawkins <nick.hawkins@hpe.com>");
|
||||
MODULE_DESCRIPTION("HPE GXP fan controller");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue