diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 2986a4369df4..5c822afb6d70 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -127,376 +127,7 @@ config USB_GADGET_STORAGE_NUM_BUFFERS a module parameter as well. If unsure, say 2. -# -# USB Peripheral Controller Support -# -# The order here is alphabetical, except that integrated controllers go -# before discrete ones so they will be the initial/default value: -# - integrated/SOC controllers first -# - licensed IP used in both SOC and discrete versions -# - discrete ones (including all PCI-only controllers) -# - debug/dummy gadget+hcd is last. -# -menu "USB Peripheral Controller" - -# -# Integrated controllers -# - -config USB_AT91 - tristate "Atmel AT91 USB Device Port" - depends on ARCH_AT91 - help - Many Atmel AT91 processors (such as the AT91RM2000) have a - full speed USB Device Port with support for five configurable - endpoints (plus endpoint zero). - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "at91_udc" and force all - gadget drivers to also be dynamically linked. - -config USB_LPC32XX - tristate "LPC32XX USB Peripheral Controller" - depends on ARCH_LPC32XX && I2C - select USB_ISP1301 - help - This option selects the USB device controller in the LPC32xx SoC. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "lpc32xx_udc" and force all - gadget drivers to also be dynamically linked. - -config USB_ATMEL_USBA - tristate "Atmel USBA" - depends on AVR32 || ARCH_AT91 - help - USBA is the integrated high-speed USB Device controller on - the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel. - -config USB_BCM63XX_UDC - tristate "Broadcom BCM63xx Peripheral Controller" - depends on BCM63XX - help - Many Broadcom BCM63xx chipsets (such as the BCM6328) have a - high speed USB Device Port with support for four fixed endpoints - (plus endpoint zero). - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "bcm63xx_udc". - -config USB_FSL_USB2 - tristate "Freescale Highspeed USB DR Peripheral Controller" - depends on FSL_SOC || ARCH_MXC - select USB_FSL_MPH_DR_OF if OF - help - Some of Freescale PowerPC and i.MX processors have a High Speed - Dual-Role(DR) USB controller, which supports device mode. - - The number of programmable endpoints is different through - SOC revisions. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "fsl_usb2_udc" and force - all gadget drivers to also be dynamically linked. - -config USB_FUSB300 - tristate "Faraday FUSB300 USB Peripheral Controller" - depends on !PHYS_ADDR_T_64BIT && HAS_DMA - help - Faraday usb device controller FUSB300 driver - -config USB_FOTG210_UDC - depends on HAS_DMA - tristate "Faraday FOTG210 USB Peripheral Controller" - help - Faraday USB2.0 OTG controller which can be configured as - high speed or full speed USB device. This driver supppors - Bulk Transfer so far. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "fotg210_udc". - -config USB_GR_UDC - tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver" - depends on HAS_DMA - help - Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB - VHDL IP core library. - -config USB_OMAP - tristate "OMAP USB Device Controller" - depends on ARCH_OMAP1 - depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3) - help - Many Texas Instruments OMAP processors have flexible full - speed USB device controllers, with support for up to 30 - endpoints (plus endpoint zero). This driver supports the - controller in the OMAP 1611, and should work with controllers - in other OMAP processors too, given minor tweaks. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "omap_udc" and force all - gadget drivers to also be dynamically linked. - -config USB_PXA25X - tristate "PXA 25x or IXP 4xx" - depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX - help - Intel's PXA 25x series XScale ARM-5TE processors include - an integrated full speed USB 1.1 device controller. The - controller in the IXP 4xx series is register-compatible. - - It has fifteen fixed-function endpoints, as well as endpoint - zero (for control transfers). - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "pxa25x_udc" and force all - gadget drivers to also be dynamically linked. - -# if there's only one gadget driver, using only two bulk endpoints, -# don't waste memory for the other endpoints -config USB_PXA25X_SMALL - depends on USB_PXA25X - bool - default n if USB_ETH_RNDIS - default y if USB_ZERO - default y if USB_ETH - default y if USB_G_SERIAL - -config USB_R8A66597 - tristate "Renesas R8A66597 USB Peripheral Controller" - depends on HAS_DMA - help - R8A66597 is a discrete USB host and peripheral controller chip that - supports both full and high speed USB 2.0 data transfers. - It has nine configurable endpoints, and endpoint zero. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "r8a66597_udc" and force all - gadget drivers to also be dynamically linked. - -config USB_RENESAS_USBHS_UDC - tristate 'Renesas USBHS controller' - depends on USB_RENESAS_USBHS - help - Renesas USBHS is a discrete USB host and peripheral controller chip - that supports both full and high speed USB 2.0 data transfers. - It has nine or more configurable endpoints, and endpoint zero. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "renesas_usbhs" and force all - gadget drivers to also be dynamically linked. - -config USB_PXA27X - tristate "PXA 27x" - help - Intel's PXA 27x series XScale ARM v5TE processors include - an integrated full speed USB 1.1 device controller. - - It has up to 23 endpoints, as well as endpoint zero (for - control transfers). - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "pxa27x_udc" and force all - gadget drivers to also be dynamically linked. - -config USB_S3C2410 - tristate "S3C2410 USB Device Controller" - depends on ARCH_S3C24XX - help - Samsung's S3C2410 is an ARM-4 processor with an integrated - full speed USB 1.1 device controller. It has 4 configurable - endpoints, as well as endpoint zero (for control transfers). - - This driver has been tested on the S3C2410, S3C2412, and - S3C2440 processors. - -config USB_S3C2410_DEBUG - boolean "S3C2410 udc debug messages" - depends on USB_S3C2410 - -config USB_S3C_HSUDC - tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller" - depends on ARCH_S3C24XX - help - Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC - integrated with dual speed USB 2.0 device controller. It has - 8 endpoints, as well as endpoint zero. - - This driver has been tested on S3C2416 and S3C2450 processors. - -config USB_MV_UDC - tristate "Marvell USB2.0 Device Controller" - depends on HAS_DMA - help - Marvell Socs (including PXA and MMP series) include a high speed - USB2.0 OTG controller, which can be configured as high speed or - full speed USB peripheral. - -config USB_MV_U3D - depends on HAS_DMA - tristate "MARVELL PXA2128 USB 3.0 controller" - help - MARVELL PXA2128 Processor series include a super speed USB3.0 device - controller, which support super speed USB peripheral. - -# -# Controllers available in both integrated and discrete versions -# - -config USB_M66592 - tristate "Renesas M66592 USB Peripheral Controller" - help - M66592 is a discrete USB peripheral controller chip that - supports both full and high speed USB 2.0 data transfers. - It has seven configurable endpoints, and endpoint zero. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "m66592_udc" and force all - gadget drivers to also be dynamically linked. - -# -# Controllers available only in discrete form (and all PCI controllers) -# - -config USB_AMD5536UDC - tristate "AMD5536 UDC" - depends on PCI - help - The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge. - It is a USB Highspeed DMA capable USB device controller. Beside ep0 - it provides 4 IN and 4 OUT endpoints (bulk or interrupt type). - The UDC port supports OTG operation, and may be used as a host port - if it's not being used to implement peripheral or OTG roles. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "amd5536udc" and force all - gadget drivers to also be dynamically linked. - -config USB_FSL_QE - tristate "Freescale QE/CPM USB Device Controller" - depends on FSL_SOC && (QUICC_ENGINE || CPM) - help - Some of Freescale PowerPC processors have a Full Speed - QE/CPM2 USB controller, which support device mode with 4 - programmable endpoints. This driver supports the - controller in the MPC8360 and MPC8272, and should work with - controllers having QE or CPM2, given minor tweaks. - - Set CONFIG_USB_GADGET to "m" to build this driver as a - dynamically linked module called "fsl_qe_udc". - -config USB_NET2272 - tristate "PLX NET2272" - help - PLX NET2272 is a USB peripheral controller which supports - both full and high speed USB 2.0 data transfers. - - It has three configurable endpoints, as well as endpoint zero - (for control transfer). - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "net2272" and force all - gadget drivers to also be dynamically linked. - -config USB_NET2272_DMA - boolean "Support external DMA controller" - depends on USB_NET2272 && HAS_DMA - help - The NET2272 part can optionally support an external DMA - controller, but your board has to have support in the - driver itself. - - If unsure, say "N" here. The driver works fine in PIO mode. - -config USB_NET2280 - tristate "NetChip 228x / PLX USB338x" - depends on PCI - help - NetChip 2280 / 2282 is a PCI based USB peripheral controller which - supports both full and high speed USB 2.0 data transfers. - - It has six configurable endpoints, as well as endpoint zero - (for control transfers) and several endpoints with dedicated - functions. - - PLX 3380 / 3382 is a PCIe based USB peripheral controller which - supports full, high speed USB 2.0 and super speed USB 3.0 - data transfers. - - It has eight configurable endpoints, as well as endpoint zero - (for control transfers) and several endpoints with dedicated - functions. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "net2280" and force all - gadget drivers to also be dynamically linked. - -config USB_GOKU - tristate "Toshiba TC86C001 'Goku-S'" - depends on PCI - help - The Toshiba TC86C001 is a PCI device which includes controllers - for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI). - - The device controller has three configurable (bulk or interrupt) - endpoints, plus endpoint zero (for control transfers). - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "goku_udc" and to force all - gadget drivers to also be dynamically linked. - -config USB_EG20T - tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC" - depends on PCI - help - This is a USB device driver for EG20T PCH. - EG20T PCH is the platform controller hub that is used in Intel's - general embedded platform. EG20T PCH has USB device interface. - Using this interface, it is able to access system devices connected - to USB device. - This driver enables USB device function. - USB device is a USB peripheral controller which - supports both full and high speed USB 2.0 data transfers. - This driver supports both control transfer and bulk transfer modes. - This driver dose not support interrupt transfer or isochronous - transfer modes. - - This driver also can be used for LAPIS Semiconductor's ML7213 which is - for IVI(In-Vehicle Infotainment) use. - ML7831 is for general purpose use. - ML7213/ML7831 is companion chip for Intel Atom E6xx series. - ML7213/ML7831 is completely compatible for Intel EG20T PCH. - -# -# LAST -- dummy/emulated controller -# - -config USB_DUMMY_HCD - tristate "Dummy HCD (DEVELOPMENT)" - depends on USB=y || (USB=m && USB_GADGET=m) - help - This host controller driver emulates USB, looping all data transfer - requests back to a USB "gadget driver" in the same host. The host - side is the master; the gadget side is the slave. Gadget drivers - can be high, full, or low speed; and they have access to endpoints - like those from NET2280, PXA2xx, or SA1100 hardware. - - This may help in some stages of creating a driver to embed in a - Linux device, since it lets you debug several parts of the gadget - driver without its hardware or drivers being involved. - - Since such a gadget side driver needs to interoperate with a host - side Linux-USB device driver, this may help to debug both sides - of a USB protocol stack. - - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "dummy_hcd" and force all - gadget drivers to also be dynamically linked. - -# NOTE: Please keep dummy_hcd LAST so that "real hardware" appears -# first and will be selected by default. - -endmenu +source "drivers/usb/gadget/udc/Kconfig" # # USB Gadget Drivers diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 61d2503ef561..c144102ea793 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -3,38 +3,11 @@ # subdir-ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG subdir-ccflags-$(CONFIG_USB_GADGET_VERBOSE) += -DVERBOSE_DEBUG +ccflags-y += -I$(PWD)/drivers/usb/gadget/udc -obj-$(CONFIG_USB_GADGET) += udc-core.o obj-$(CONFIG_USB_LIBCOMPOSITE) += libcomposite.o libcomposite-y := usbstring.o config.o epautoconf.o libcomposite-y += composite.o functions.o configfs.o u_f.o -obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o -obj-$(CONFIG_USB_NET2272) += net2272.o -obj-$(CONFIG_USB_NET2280) += net2280.o -obj-$(CONFIG_USB_AMD5536UDC) += amd5536udc.o -obj-$(CONFIG_USB_PXA25X) += pxa25x_udc.o -obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o -obj-$(CONFIG_USB_GOKU) += goku_udc.o -obj-$(CONFIG_USB_OMAP) += omap_udc.o -obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o -obj-$(CONFIG_USB_AT91) += at91_udc.o -obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o -obj-$(CONFIG_USB_BCM63XX_UDC) += bcm63xx_udc.o -obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o -fsl_usb2_udc-y := fsl_udc_core.o -fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o -obj-$(CONFIG_USB_M66592) += m66592-udc.o -obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o -obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o -obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o -obj-$(CONFIG_USB_LPC32XX) += lpc32xx_udc.o -obj-$(CONFIG_USB_EG20T) += pch_udc.o -obj-$(CONFIG_USB_MV_UDC) += mv_udc.o -mv_udc-y := mv_udc_core.o -obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o -obj-$(CONFIG_USB_FOTG210_UDC) += fotg210-udc.o -obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o -obj-$(CONFIG_USB_GR_UDC) += gr_udc.o # USB Functions usb_f_acm-y := f_acm.o @@ -64,4 +37,4 @@ obj-$(CONFIG_USB_F_MASS_STORAGE)+= usb_f_mass_storage.o usb_f_fs-y := f_fs.o obj-$(CONFIG_USB_F_FS) += usb_f_fs.o -obj-$(CONFIG_USB_GADGET) += legacy/ +obj-$(CONFIG_USB_GADGET) += udc/ legacy/ diff --git a/drivers/usb/gadget/legacy/Makefile b/drivers/usb/gadget/legacy/Makefile index fbb32aa6f690..d4570744e106 100644 --- a/drivers/usb/gadget/legacy/Makefile +++ b/drivers/usb/gadget/legacy/Makefile @@ -3,6 +3,7 @@ # ccflags-y := -I$(PWD)/drivers/usb/gadget/ +ccflags-y += -I$(PWD)/drivers/usb/gadget/udc/ g_zero-y := zero.o g_audio-y := audio.o diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig new file mode 100644 index 000000000000..5151f947a4f5 --- /dev/null +++ b/drivers/usb/gadget/udc/Kconfig @@ -0,0 +1,385 @@ +# +# USB Gadget support on a system involves +# (a) a peripheral controller, and +# (b) the gadget driver using it. +# +# NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !! +# +# - Host systems (like PCs) need CONFIG_USB (with "A" jacks). +# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). +# - Some systems have both kinds of controllers. +# +# With help from a special transceiver and a "Mini-AB" jack, systems with +# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). +# + +# +# USB Peripheral Controller Support +# +# The order here is alphabetical, except that integrated controllers go +# before discrete ones so they will be the initial/default value: +# - integrated/SOC controllers first +# - licensed IP used in both SOC and discrete versions +# - discrete ones (including all PCI-only controllers) +# - debug/dummy gadget+hcd is last. +# +menu "USB Peripheral Controller" + +# +# Integrated controllers +# + +config USB_AT91 + tristate "Atmel AT91 USB Device Port" + depends on ARCH_AT91 + help + Many Atmel AT91 processors (such as the AT91RM2000) have a + full speed USB Device Port with support for five configurable + endpoints (plus endpoint zero). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "at91_udc" and force all + gadget drivers to also be dynamically linked. + +config USB_LPC32XX + tristate "LPC32XX USB Peripheral Controller" + depends on ARCH_LPC32XX && I2C + select USB_ISP1301 + help + This option selects the USB device controller in the LPC32xx SoC. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "lpc32xx_udc" and force all + gadget drivers to also be dynamically linked. + +config USB_ATMEL_USBA + tristate "Atmel USBA" + depends on AVR32 || ARCH_AT91 + help + USBA is the integrated high-speed USB Device controller on + the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel. + +config USB_BCM63XX_UDC + tristate "Broadcom BCM63xx Peripheral Controller" + depends on BCM63XX + help + Many Broadcom BCM63xx chipsets (such as the BCM6328) have a + high speed USB Device Port with support for four fixed endpoints + (plus endpoint zero). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "bcm63xx_udc". + +config USB_FSL_USB2 + tristate "Freescale Highspeed USB DR Peripheral Controller" + depends on FSL_SOC || ARCH_MXC + select USB_FSL_MPH_DR_OF if OF + help + Some of Freescale PowerPC and i.MX processors have a High Speed + Dual-Role(DR) USB controller, which supports device mode. + + The number of programmable endpoints is different through + SOC revisions. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "fsl_usb2_udc" and force + all gadget drivers to also be dynamically linked. + +config USB_FUSB300 + tristate "Faraday FUSB300 USB Peripheral Controller" + depends on !PHYS_ADDR_T_64BIT && HAS_DMA + help + Faraday usb device controller FUSB300 driver + +config USB_FOTG210_UDC + depends on HAS_DMA + tristate "Faraday FOTG210 USB Peripheral Controller" + help + Faraday USB2.0 OTG controller which can be configured as + high speed or full speed USB device. This driver supppors + Bulk Transfer so far. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "fotg210_udc". + +config USB_GR_UDC + tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver" + depends on HAS_DMA + help + Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB + VHDL IP core library. + +config USB_OMAP + tristate "OMAP USB Device Controller" + depends on ARCH_OMAP1 + depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3) + help + Many Texas Instruments OMAP processors have flexible full + speed USB device controllers, with support for up to 30 + endpoints (plus endpoint zero). This driver supports the + controller in the OMAP 1611, and should work with controllers + in other OMAP processors too, given minor tweaks. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "omap_udc" and force all + gadget drivers to also be dynamically linked. + +config USB_PXA25X + tristate "PXA 25x or IXP 4xx" + depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX + help + Intel's PXA 25x series XScale ARM-5TE processors include + an integrated full speed USB 1.1 device controller. The + controller in the IXP 4xx series is register-compatible. + + It has fifteen fixed-function endpoints, as well as endpoint + zero (for control transfers). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "pxa25x_udc" and force all + gadget drivers to also be dynamically linked. + +# if there's only one gadget driver, using only two bulk endpoints, +# don't waste memory for the other endpoints +config USB_PXA25X_SMALL + depends on USB_PXA25X + bool + default n if USB_ETH_RNDIS + default y if USB_ZERO + default y if USB_ETH + default y if USB_G_SERIAL + +config USB_R8A66597 + tristate "Renesas R8A66597 USB Peripheral Controller" + depends on HAS_DMA + help + R8A66597 is a discrete USB host and peripheral controller chip that + supports both full and high speed USB 2.0 data transfers. + It has nine configurable endpoints, and endpoint zero. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "r8a66597_udc" and force all + gadget drivers to also be dynamically linked. + +config USB_RENESAS_USBHS_UDC + tristate 'Renesas USBHS controller' + depends on USB_RENESAS_USBHS + help + Renesas USBHS is a discrete USB host and peripheral controller chip + that supports both full and high speed USB 2.0 data transfers. + It has nine or more configurable endpoints, and endpoint zero. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "renesas_usbhs" and force all + gadget drivers to also be dynamically linked. + +config USB_PXA27X + tristate "PXA 27x" + help + Intel's PXA 27x series XScale ARM v5TE processors include + an integrated full speed USB 1.1 device controller. + + It has up to 23 endpoints, as well as endpoint zero (for + control transfers). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "pxa27x_udc" and force all + gadget drivers to also be dynamically linked. + +config USB_S3C2410 + tristate "S3C2410 USB Device Controller" + depends on ARCH_S3C24XX + help + Samsung's S3C2410 is an ARM-4 processor with an integrated + full speed USB 1.1 device controller. It has 4 configurable + endpoints, as well as endpoint zero (for control transfers). + + This driver has been tested on the S3C2410, S3C2412, and + S3C2440 processors. + +config USB_S3C2410_DEBUG + boolean "S3C2410 udc debug messages" + depends on USB_S3C2410 + +config USB_S3C_HSUDC + tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller" + depends on ARCH_S3C24XX + help + Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC + integrated with dual speed USB 2.0 device controller. It has + 8 endpoints, as well as endpoint zero. + + This driver has been tested on S3C2416 and S3C2450 processors. + +config USB_MV_UDC + tristate "Marvell USB2.0 Device Controller" + depends on HAS_DMA + help + Marvell Socs (including PXA and MMP series) include a high speed + USB2.0 OTG controller, which can be configured as high speed or + full speed USB peripheral. + +config USB_MV_U3D + depends on HAS_DMA + tristate "MARVELL PXA2128 USB 3.0 controller" + help + MARVELL PXA2128 Processor series include a super speed USB3.0 device + controller, which support super speed USB peripheral. + +# +# Controllers available in both integrated and discrete versions +# + +config USB_M66592 + tristate "Renesas M66592 USB Peripheral Controller" + help + M66592 is a discrete USB peripheral controller chip that + supports both full and high speed USB 2.0 data transfers. + It has seven configurable endpoints, and endpoint zero. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "m66592_udc" and force all + gadget drivers to also be dynamically linked. + +# +# Controllers available only in discrete form (and all PCI controllers) +# + +config USB_AMD5536UDC + tristate "AMD5536 UDC" + depends on PCI + help + The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge. + It is a USB Highspeed DMA capable USB device controller. Beside ep0 + it provides 4 IN and 4 OUT endpoints (bulk or interrupt type). + The UDC port supports OTG operation, and may be used as a host port + if it's not being used to implement peripheral or OTG roles. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "amd5536udc" and force all + gadget drivers to also be dynamically linked. + +config USB_FSL_QE + tristate "Freescale QE/CPM USB Device Controller" + depends on FSL_SOC && (QUICC_ENGINE || CPM) + help + Some of Freescale PowerPC processors have a Full Speed + QE/CPM2 USB controller, which support device mode with 4 + programmable endpoints. This driver supports the + controller in the MPC8360 and MPC8272, and should work with + controllers having QE or CPM2, given minor tweaks. + + Set CONFIG_USB_GADGET to "m" to build this driver as a + dynamically linked module called "fsl_qe_udc". + +config USB_NET2272 + tristate "PLX NET2272" + help + PLX NET2272 is a USB peripheral controller which supports + both full and high speed USB 2.0 data transfers. + + It has three configurable endpoints, as well as endpoint zero + (for control transfer). + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "net2272" and force all + gadget drivers to also be dynamically linked. + +config USB_NET2272_DMA + boolean "Support external DMA controller" + depends on USB_NET2272 && HAS_DMA + help + The NET2272 part can optionally support an external DMA + controller, but your board has to have support in the + driver itself. + + If unsure, say "N" here. The driver works fine in PIO mode. + +config USB_NET2280 + tristate "NetChip 228x / PLX USB338x" + depends on PCI + help + NetChip 2280 / 2282 is a PCI based USB peripheral controller which + supports both full and high speed USB 2.0 data transfers. + + It has six configurable endpoints, as well as endpoint zero + (for control transfers) and several endpoints with dedicated + functions. + + PLX 3380 / 3382 is a PCIe based USB peripheral controller which + supports full, high speed USB 2.0 and super speed USB 3.0 + data transfers. + + It has eight configurable endpoints, as well as endpoint zero + (for control transfers) and several endpoints with dedicated + functions. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "net2280" and force all + gadget drivers to also be dynamically linked. + +config USB_GOKU + tristate "Toshiba TC86C001 'Goku-S'" + depends on PCI + help + The Toshiba TC86C001 is a PCI device which includes controllers + for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI). + + The device controller has three configurable (bulk or interrupt) + endpoints, plus endpoint zero (for control transfers). + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "goku_udc" and to force all + gadget drivers to also be dynamically linked. + +config USB_EG20T + tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC" + depends on PCI + help + This is a USB device driver for EG20T PCH. + EG20T PCH is the platform controller hub that is used in Intel's + general embedded platform. EG20T PCH has USB device interface. + Using this interface, it is able to access system devices connected + to USB device. + This driver enables USB device function. + USB device is a USB peripheral controller which + supports both full and high speed USB 2.0 data transfers. + This driver supports both control transfer and bulk transfer modes. + This driver dose not support interrupt transfer or isochronous + transfer modes. + + This driver also can be used for LAPIS Semiconductor's ML7213 which is + for IVI(In-Vehicle Infotainment) use. + ML7831 is for general purpose use. + ML7213/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7831 is completely compatible for Intel EG20T PCH. + +# +# LAST -- dummy/emulated controller +# + +config USB_DUMMY_HCD + tristate "Dummy HCD (DEVELOPMENT)" + depends on USB=y || (USB=m && USB_GADGET=m) + help + This host controller driver emulates USB, looping all data transfer + requests back to a USB "gadget driver" in the same host. The host + side is the master; the gadget side is the slave. Gadget drivers + can be high, full, or low speed; and they have access to endpoints + like those from NET2280, PXA2xx, or SA1100 hardware. + + This may help in some stages of creating a driver to embed in a + Linux device, since it lets you debug several parts of the gadget + driver without its hardware or drivers being involved. + + Since such a gadget side driver needs to interoperate with a host + side Linux-USB device driver, this may help to debug both sides + of a USB protocol stack. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "dummy_hcd" and force all + gadget drivers to also be dynamically linked. + +# NOTE: Please keep dummy_hcd LAST so that "real hardware" appears +# first and will be selected by default. + +endmenu diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile new file mode 100644 index 000000000000..4096122bb283 --- /dev/null +++ b/drivers/usb/gadget/udc/Makefile @@ -0,0 +1,31 @@ +# +# USB peripheral controller drivers +# +obj-$(CONFIG_USB_GADGET) += udc-core.o +obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o +obj-$(CONFIG_USB_NET2272) += net2272.o +obj-$(CONFIG_USB_NET2280) += net2280.o +obj-$(CONFIG_USB_AMD5536UDC) += amd5536udc.o +obj-$(CONFIG_USB_PXA25X) += pxa25x_udc.o +obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o +obj-$(CONFIG_USB_GOKU) += goku_udc.o +obj-$(CONFIG_USB_OMAP) += omap_udc.o +obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o +obj-$(CONFIG_USB_AT91) += at91_udc.o +obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o +obj-$(CONFIG_USB_BCM63XX_UDC) += bcm63xx_udc.o +obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o +fsl_usb2_udc-y := fsl_udc_core.o +fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o +obj-$(CONFIG_USB_M66592) += m66592-udc.o +obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o +obj-$(CONFIG_USB_FSL_QE) += fsl_qe_udc.o +obj-$(CONFIG_USB_S3C_HSUDC) += s3c-hsudc.o +obj-$(CONFIG_USB_LPC32XX) += lpc32xx_udc.o +obj-$(CONFIG_USB_EG20T) += pch_udc.o +obj-$(CONFIG_USB_MV_UDC) += mv_udc.o +mv_udc-y := mv_udc_core.o +obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o +obj-$(CONFIG_USB_FOTG210_UDC) += fotg210-udc.o +obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o +obj-$(CONFIG_USB_GR_UDC) += gr_udc.o diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/udc/amd5536udc.c similarity index 100% rename from drivers/usb/gadget/amd5536udc.c rename to drivers/usb/gadget/udc/amd5536udc.c diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/udc/amd5536udc.h similarity index 100% rename from drivers/usb/gadget/amd5536udc.h rename to drivers/usb/gadget/udc/amd5536udc.h diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c similarity index 100% rename from drivers/usb/gadget/at91_udc.c rename to drivers/usb/gadget/udc/at91_udc.c diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/udc/at91_udc.h similarity index 100% rename from drivers/usb/gadget/at91_udc.h rename to drivers/usb/gadget/udc/at91_udc.h diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c similarity index 100% rename from drivers/usb/gadget/atmel_usba_udc.c rename to drivers/usb/gadget/udc/atmel_usba_udc.c diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h similarity index 100% rename from drivers/usb/gadget/atmel_usba_udc.h rename to drivers/usb/gadget/udc/atmel_usba_udc.h diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c similarity index 100% rename from drivers/usb/gadget/bcm63xx_udc.c rename to drivers/usb/gadget/udc/bcm63xx_udc.c diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c similarity index 100% rename from drivers/usb/gadget/dummy_hcd.c rename to drivers/usb/gadget/udc/dummy_hcd.c diff --git a/drivers/usb/gadget/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c similarity index 100% rename from drivers/usb/gadget/fotg210-udc.c rename to drivers/usb/gadget/udc/fotg210-udc.c diff --git a/drivers/usb/gadget/fotg210.h b/drivers/usb/gadget/udc/fotg210.h similarity index 100% rename from drivers/usb/gadget/fotg210.h rename to drivers/usb/gadget/udc/fotg210.h diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/udc/fsl_mxc_udc.c similarity index 100% rename from drivers/usb/gadget/fsl_mxc_udc.c rename to drivers/usb/gadget/udc/fsl_mxc_udc.c diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c similarity index 100% rename from drivers/usb/gadget/fsl_qe_udc.c rename to drivers/usb/gadget/udc/fsl_qe_udc.c diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/udc/fsl_qe_udc.h similarity index 100% rename from drivers/usb/gadget/fsl_qe_udc.h rename to drivers/usb/gadget/udc/fsl_qe_udc.h diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c similarity index 100% rename from drivers/usb/gadget/fsl_udc_core.c rename to drivers/usb/gadget/udc/fsl_udc_core.c diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/udc/fsl_usb2_udc.h similarity index 100% rename from drivers/usb/gadget/fsl_usb2_udc.h rename to drivers/usb/gadget/udc/fsl_usb2_udc.h diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c similarity index 100% rename from drivers/usb/gadget/fusb300_udc.c rename to drivers/usb/gadget/udc/fusb300_udc.c diff --git a/drivers/usb/gadget/fusb300_udc.h b/drivers/usb/gadget/udc/fusb300_udc.h similarity index 100% rename from drivers/usb/gadget/fusb300_udc.h rename to drivers/usb/gadget/udc/fusb300_udc.h diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/udc/gadget_chips.h similarity index 100% rename from drivers/usb/gadget/gadget_chips.h rename to drivers/usb/gadget/udc/gadget_chips.h diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c similarity index 100% rename from drivers/usb/gadget/goku_udc.c rename to drivers/usb/gadget/udc/goku_udc.c diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/udc/goku_udc.h similarity index 100% rename from drivers/usb/gadget/goku_udc.h rename to drivers/usb/gadget/udc/goku_udc.h diff --git a/drivers/usb/gadget/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c similarity index 100% rename from drivers/usb/gadget/gr_udc.c rename to drivers/usb/gadget/udc/gr_udc.c diff --git a/drivers/usb/gadget/gr_udc.h b/drivers/usb/gadget/udc/gr_udc.h similarity index 100% rename from drivers/usb/gadget/gr_udc.h rename to drivers/usb/gadget/udc/gr_udc.h diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c similarity index 100% rename from drivers/usb/gadget/lpc32xx_udc.c rename to drivers/usb/gadget/udc/lpc32xx_udc.c diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c similarity index 100% rename from drivers/usb/gadget/m66592-udc.c rename to drivers/usb/gadget/udc/m66592-udc.c diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/udc/m66592-udc.h similarity index 100% rename from drivers/usb/gadget/m66592-udc.h rename to drivers/usb/gadget/udc/m66592-udc.h diff --git a/drivers/usb/gadget/mv_u3d.h b/drivers/usb/gadget/udc/mv_u3d.h similarity index 100% rename from drivers/usb/gadget/mv_u3d.h rename to drivers/usb/gadget/udc/mv_u3d.h diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c similarity index 100% rename from drivers/usb/gadget/mv_u3d_core.c rename to drivers/usb/gadget/udc/mv_u3d_core.c diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/udc/mv_udc.h similarity index 100% rename from drivers/usb/gadget/mv_udc.h rename to drivers/usb/gadget/udc/mv_udc.h diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c similarity index 100% rename from drivers/usb/gadget/mv_udc_core.c rename to drivers/usb/gadget/udc/mv_udc_core.c diff --git a/drivers/usb/gadget/net2272.c b/drivers/usb/gadget/udc/net2272.c similarity index 100% rename from drivers/usb/gadget/net2272.c rename to drivers/usb/gadget/udc/net2272.c diff --git a/drivers/usb/gadget/net2272.h b/drivers/usb/gadget/udc/net2272.h similarity index 100% rename from drivers/usb/gadget/net2272.h rename to drivers/usb/gadget/udc/net2272.h diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/udc/net2280.c similarity index 100% rename from drivers/usb/gadget/net2280.c rename to drivers/usb/gadget/udc/net2280.c diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/udc/net2280.h similarity index 100% rename from drivers/usb/gadget/net2280.h rename to drivers/usb/gadget/udc/net2280.h diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c similarity index 100% rename from drivers/usb/gadget/omap_udc.c rename to drivers/usb/gadget/udc/omap_udc.c diff --git a/drivers/usb/gadget/omap_udc.h b/drivers/usb/gadget/udc/omap_udc.h similarity index 100% rename from drivers/usb/gadget/omap_udc.h rename to drivers/usb/gadget/udc/omap_udc.h diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c similarity index 100% rename from drivers/usb/gadget/pch_udc.c rename to drivers/usb/gadget/udc/pch_udc.c diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c similarity index 100% rename from drivers/usb/gadget/pxa25x_udc.c rename to drivers/usb/gadget/udc/pxa25x_udc.c diff --git a/drivers/usb/gadget/pxa25x_udc.h b/drivers/usb/gadget/udc/pxa25x_udc.h similarity index 100% rename from drivers/usb/gadget/pxa25x_udc.h rename to drivers/usb/gadget/udc/pxa25x_udc.h diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c similarity index 100% rename from drivers/usb/gadget/pxa27x_udc.c rename to drivers/usb/gadget/udc/pxa27x_udc.c diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/udc/pxa27x_udc.h similarity index 100% rename from drivers/usb/gadget/pxa27x_udc.h rename to drivers/usb/gadget/udc/pxa27x_udc.h diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c similarity index 100% rename from drivers/usb/gadget/r8a66597-udc.c rename to drivers/usb/gadget/udc/r8a66597-udc.c diff --git a/drivers/usb/gadget/r8a66597-udc.h b/drivers/usb/gadget/udc/r8a66597-udc.h similarity index 100% rename from drivers/usb/gadget/r8a66597-udc.h rename to drivers/usb/gadget/udc/r8a66597-udc.h diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c similarity index 100% rename from drivers/usb/gadget/s3c-hsudc.c rename to drivers/usb/gadget/udc/s3c-hsudc.c diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c similarity index 100% rename from drivers/usb/gadget/s3c2410_udc.c rename to drivers/usb/gadget/udc/s3c2410_udc.c diff --git a/drivers/usb/gadget/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h similarity index 100% rename from drivers/usb/gadget/s3c2410_udc.h rename to drivers/usb/gadget/udc/s3c2410_udc.h diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc/udc-core.c similarity index 100% rename from drivers/usb/gadget/udc-core.c rename to drivers/usb/gadget/udc/udc-core.c