scsi: libsas: aic94xx: hisi_sas: mvsas: pm8001: Use dev_is_expander()

Many times in libsas, and in LLDDs which use libsas, the check for an
expander device is re-implemented or open coded.

Use dev_is_expander() instead. We rename this from
sas_dev_type_is_expander() to not spill so many lines in referencing.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit is contained in:
John Garry 2019-06-10 20:41:41 +08:00 committed by Martin K. Petersen
parent 895d8860a1
commit 924a3541ea
19 changed files with 35 additions and 61 deletions

View File

@ -187,9 +187,7 @@ static int asd_init_target_ddb(struct domain_device *dev)
}
} else {
flags |= CONCURRENT_CONN_SUPP;
if (!dev->parent &&
(dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE))
if (!dev->parent && dev_is_expander(dev->dev_type))
asd_ddbsite_write_byte(asd_ha, ddb, MAX_CCONN,
4);
else

View File

@ -66,10 +66,6 @@
#define HISI_SAS_MAX_SMP_RESP_SZ 1028
#define HISI_SAS_MAX_STP_RESP_SZ 28
#define DEV_IS_EXPANDER(type) \
((type == SAS_EDGE_EXPANDER_DEVICE) || \
(type == SAS_FANOUT_EXPANDER_DEVICE))
#define HISI_SAS_SATA_PROTOCOL_NONDATA 0x1
#define HISI_SAS_SATA_PROTOCOL_PIO 0x2
#define HISI_SAS_SATA_PROTOCOL_DMA 0x4

View File

@ -808,7 +808,7 @@ static int hisi_sas_dev_found(struct domain_device *device)
device->lldd_dev = sas_dev;
hisi_hba->hw->setup_itct(hisi_hba, sas_dev);
if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
if (parent_dev && dev_is_expander(parent_dev->dev_type)) {
int phy_no;
u8 phy_num = parent_dev->ex_dev.num_phys;
struct ex_phy *phy;
@ -1451,7 +1451,7 @@ static void hisi_sas_rescan_topology(struct hisi_hba *hisi_hba, u32 old_state,
_sas_port = sas_port;
if (DEV_IS_EXPANDER(dev->dev_type))
if (dev_is_expander(dev->dev_type))
sas_ha->notify_port_event(sas_phy,
PORTE_BROADCAST_RCVD);
}
@ -1538,7 +1538,7 @@ static void hisi_sas_terminate_stp_reject(struct hisi_hba *hisi_hba)
struct domain_device *port_dev = sas_port->port_dev;
struct domain_device *device;
if (!port_dev || !DEV_IS_EXPANDER(port_dev->dev_type))
if (!port_dev || !dev_is_expander(port_dev->dev_type))
continue;
/* Try to find a SATA device */
@ -1908,7 +1908,7 @@ static int hisi_sas_clear_nexus_ha(struct sas_ha_struct *sas_ha)
struct domain_device *device = sas_dev->sas_device;
if ((sas_dev->dev_type == SAS_PHY_UNUSED) || !device ||
DEV_IS_EXPANDER(device->dev_type))
dev_is_expander(device->dev_type))
continue;
rc = hisi_sas_debug_I_T_nexus_reset(device);

View File

@ -949,7 +949,7 @@ static void setup_itct_v2_hw(struct hisi_hba *hisi_hba,
break;
case SAS_SATA_DEV:
case SAS_SATA_PENDING:
if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
if (parent_dev && dev_is_expander(parent_dev->dev_type))
qw0 = HISI_SAS_DEV_TYPE_STP << ITCT_HDR_DEV_TYPE_OFF;
else
qw0 = HISI_SAS_DEV_TYPE_SATA << ITCT_HDR_DEV_TYPE_OFF;
@ -2531,7 +2531,7 @@ static void prep_ata_v2_hw(struct hisi_hba *hisi_hba,
/* create header */
/* dw0 */
dw0 = port->id << CMD_HDR_PORT_OFF;
if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
if (parent_dev && dev_is_expander(parent_dev->dev_type))
dw0 |= 3 << CMD_HDR_CMD_OFF;
else
dw0 |= 4 << CMD_HDR_CMD_OFF;

View File

@ -759,7 +759,7 @@ static void setup_itct_v3_hw(struct hisi_hba *hisi_hba,
break;
case SAS_SATA_DEV:
case SAS_SATA_PENDING:
if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
if (parent_dev && dev_is_expander(parent_dev->dev_type))
qw0 = HISI_SAS_DEV_TYPE_STP << ITCT_HDR_DEV_TYPE_OFF;
else
qw0 = HISI_SAS_DEV_TYPE_SATA << ITCT_HDR_DEV_TYPE_OFF;
@ -1358,7 +1358,7 @@ static void prep_ata_v3_hw(struct hisi_hba *hisi_hba,
u32 dw1 = 0, dw2 = 0;
hdr->dw0 = cpu_to_le32(port->id << CMD_HDR_PORT_OFF);
if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
if (parent_dev && dev_is_expander(parent_dev->dev_type))
hdr->dw0 |= cpu_to_le32(3 << CMD_HDR_CMD_OFF);
else
hdr->dw0 |= cpu_to_le32(4U << CMD_HDR_CMD_OFF);

View File

@ -1087,7 +1087,7 @@ static void sci_remote_device_ready_state_enter(struct sci_base_state_machine *s
if (dev->dev_type == SAS_SATA_DEV || (dev->tproto & SAS_PROTOCOL_SATA)) {
sci_change_state(&idev->sm, SCI_STP_DEV_IDLE);
} else if (dev_is_expander(dev)) {
} else if (dev_is_expander(dev->dev_type)) {
sci_change_state(&idev->sm, SCI_SMP_DEV_IDLE);
} else
isci_remote_device_ready(ihost, idev);
@ -1478,7 +1478,7 @@ static enum sci_status isci_remote_device_construct(struct isci_port *iport,
struct domain_device *dev = idev->domain_dev;
enum sci_status status;
if (dev->parent && dev_is_expander(dev->parent))
if (dev->parent && dev_is_expander(dev->parent->dev_type))
status = sci_remote_device_ea_construct(iport, idev);
else
status = sci_remote_device_da_construct(iport, idev);

View File

@ -295,11 +295,6 @@ static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_conte
return idev;
}
static inline bool dev_is_expander(struct domain_device *dev)
{
return dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE;
}
static inline void sci_remote_device_decrement_request_count(struct isci_remote_device *idev)
{
/* XXX delete this voodoo when converting to the top-level device

View File

@ -3101,7 +3101,7 @@ sci_io_request_construct(struct isci_host *ihost,
/* pass */;
else if (dev_is_sata(dev))
memset(&ireq->stp.cmd, 0, sizeof(ireq->stp.cmd));
else if (dev_is_expander(dev))
else if (dev_is_expander(dev->dev_type))
/* pass */;
else
return SCI_FAILURE_UNSUPPORTED_PROTOCOL;

View File

@ -511,7 +511,7 @@ int isci_task_abort_task(struct sas_task *task)
"%s: dev = %p (%s%s), task = %p, old_request == %p\n",
__func__, idev,
(dev_is_sata(task->dev) ? "STP/SATA"
: ((dev_is_expander(task->dev))
: ((dev_is_expander(task->dev->dev_type))
? "SMP"
: "SSP")),
((idev) ? ((test_bit(IDEV_GONE, &idev->flags))

View File

@ -293,7 +293,7 @@ void sas_free_device(struct kref *kref)
dev->phy = NULL;
/* remove the phys and ports, everything else should be gone */
if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
if (dev_is_expander(dev->dev_type))
kfree(dev->ex_dev.ex_phy);
if (dev_is_sata(dev) && dev->sata_dev.ap) {
@ -503,8 +503,7 @@ static void sas_revalidate_domain(struct work_struct *work)
pr_debug("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id,
task_pid_nr(current));
if (ddev && (ddev->dev_type == SAS_FANOUT_EXPANDER_DEVICE ||
ddev->dev_type == SAS_EDGE_EXPANDER_DEVICE))
if (ddev && dev_is_expander(ddev->dev_type))
res = sas_ex_revalidate_domain(ddev);
pr_debug("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n",

View File

@ -1120,8 +1120,7 @@ static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr)
phy->phy_state == PHY_NOT_PRESENT)
continue;
if ((phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE ||
phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE) &&
if (dev_is_expander(phy->attached_dev_type) &&
phy->routing_attr == SUBTRACTIVE_ROUTING) {
memcpy(sub_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
@ -1139,8 +1138,7 @@ static int sas_check_level_subtractive_boundary(struct domain_device *dev)
u8 sub_addr[SAS_ADDR_SIZE] = {0, };
list_for_each_entry(child, &ex->children, siblings) {
if (child->dev_type != SAS_EDGE_EXPANDER_DEVICE &&
child->dev_type != SAS_FANOUT_EXPANDER_DEVICE)
if (!dev_is_expander(child->dev_type))
continue;
if (sub_addr[0] == 0) {
sas_find_sub_addr(child, sub_addr);
@ -1225,8 +1223,7 @@ static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
phy->phy_state == PHY_NOT_PRESENT)
continue;
if ((phy->attached_dev_type == SAS_FANOUT_EXPANDER_DEVICE ||
phy->attached_dev_type == SAS_EDGE_EXPANDER_DEVICE) &&
if (dev_is_expander(phy->attached_dev_type) &&
phy->routing_attr == SUBTRACTIVE_ROUTING) {
if (!sub_sas_addr)
@ -1322,8 +1319,7 @@ static int sas_check_parent_topology(struct domain_device *child)
if (!child->parent)
return 0;
if (child->parent->dev_type != SAS_EDGE_EXPANDER_DEVICE &&
child->parent->dev_type != SAS_FANOUT_EXPANDER_DEVICE)
if (!dev_is_expander(child->parent->dev_type))
return 0;
parent_ex = &child->parent->ex_dev;
@ -1619,8 +1615,7 @@ static int sas_ex_level_discovery(struct asd_sas_port *port, const int level)
struct domain_device *dev;
list_for_each_entry(dev, &port->dev_list, dev_list_node) {
if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
if (dev_is_expander(dev->dev_type)) {
struct sas_expander_device *ex =
rphy_to_expander_device(dev->rphy);
@ -1852,7 +1847,7 @@ static int sas_find_bcast_dev(struct domain_device *dev,
SAS_ADDR(dev->sas_addr));
}
list_for_each_entry(ch, &ex->children, siblings) {
if (ch->dev_type == SAS_EDGE_EXPANDER_DEVICE || ch->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
if (dev_is_expander(ch->dev_type)) {
res = sas_find_bcast_dev(ch, src_dev);
if (*src_dev)
return res;
@ -1869,8 +1864,7 @@ static void sas_unregister_ex_tree(struct asd_sas_port *port, struct domain_devi
list_for_each_entry_safe(child, n, &ex->children, siblings) {
set_bit(SAS_DEV_GONE, &child->state);
if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
if (dev_is_expander(child->dev_type))
sas_unregister_ex_tree(port, child);
else
sas_unregister_dev(port, child);
@ -1890,8 +1884,7 @@ static void sas_unregister_devs_sas_addr(struct domain_device *parent,
if (SAS_ADDR(child->sas_addr) ==
SAS_ADDR(phy->attached_sas_addr)) {
set_bit(SAS_DEV_GONE, &child->state);
if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
if (dev_is_expander(child->dev_type))
sas_unregister_ex_tree(parent->port, child);
else
sas_unregister_dev(parent->port, child);
@ -1920,8 +1913,7 @@ static int sas_discover_bfs_by_root_level(struct domain_device *root,
int res = 0;
list_for_each_entry(child, &ex_root->children, siblings) {
if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
if (dev_is_expander(child->dev_type)) {
struct sas_expander_device *ex =
rphy_to_expander_device(child->rphy);
@ -1974,8 +1966,7 @@ static int sas_discover_new(struct domain_device *dev, int phy_id)
list_for_each_entry(child, &dev->ex_dev.children, siblings) {
if (SAS_ADDR(child->sas_addr) ==
SAS_ADDR(ex_phy->attached_sas_addr)) {
if (child->dev_type == SAS_EDGE_EXPANDER_DEVICE ||
child->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
if (dev_is_expander(child->dev_type))
res = sas_discover_bfs_by_root(child);
break;
}

View File

@ -54,7 +54,7 @@ static void sas_resume_port(struct asd_sas_phy *phy)
continue;
}
if (dev->dev_type == SAS_EDGE_EXPANDER_DEVICE || dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
if (dev_is_expander(dev->dev_type)) {
dev->ex_dev.ex_change_count = -1;
for (i = 0; i < dev->ex_dev.num_phys; i++) {
struct ex_phy *phy = &dev->ex_dev.ex_phy[i];
@ -179,7 +179,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
sas_discover_event(phy->port, DISCE_DISCOVER_DOMAIN);
/* Only insert a revalidate event after initial discovery */
if (port_dev && sas_dev_type_is_expander(port_dev->dev_type)) {
if (port_dev && dev_is_expander(port_dev->dev_type)) {
struct expander_device *ex_dev = &port_dev->ex_dev;
ex_dev->ex_change_count = -1;
@ -248,7 +248,7 @@ void sas_deform_port(struct asd_sas_phy *phy, int gone)
spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags);
/* Only insert revalidate event if the port still has members */
if (port->port && dev && sas_dev_type_is_expander(dev->dev_type)) {
if (port->port && dev && dev_is_expander(dev->dev_type)) {
struct expander_device *ex_dev = &dev->ex_dev;
ex_dev->ex_change_count = -1;

View File

@ -1209,7 +1209,7 @@ static int mvs_dev_found_notify(struct domain_device *dev, int lock)
mvi_device->dev_type = dev->dev_type;
mvi_device->mvi_info = mvi;
mvi_device->sas_device = dev;
if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
if (parent_dev && dev_is_expander(parent_dev->dev_type)) {
int phy_id;
u8 phy_num = parent_dev->ex_dev.num_phys;
struct ex_phy *phy;

View File

@ -66,9 +66,6 @@ extern struct mvs_info *tgt_mvi;
extern const struct mvs_dispatch mvs_64xx_dispatch;
extern const struct mvs_dispatch mvs_94xx_dispatch;
#define DEV_IS_EXPANDER(type) \
((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE))
#define bit(n) ((u64)1 << n)
#define for_each_phy(__lseq_mask, __mc, __lseq) \

View File

@ -2356,7 +2356,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
(status != IO_UNDERFLOW)) {
if (!((t->dev->parent) &&
(DEV_IS_EXPANDER(t->dev->parent->dev_type)))) {
(dev_is_expander(t->dev->parent->dev_type)))) {
for (i = 0 , j = 4; j <= 7 && i <= 3; i++ , j++)
sata_addr_low[i] = pm8001_ha->sas_addr[j];
for (i = 0 , j = 0; j <= 3 && i <= 3; i++ , j++)
@ -4560,7 +4560,7 @@ static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
stp_sspsmp_sata = 0x01; /*ssp or smp*/
}
if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
if (parent_dev && dev_is_expander(parent_dev->dev_type))
phy_id = parent_dev->ex_dev.ex_phy->phy_id;
else
phy_id = pm8001_dev->attached_phy;

View File

@ -634,7 +634,7 @@ static int pm8001_dev_found_notify(struct domain_device *dev)
dev->lldd_dev = pm8001_device;
pm8001_device->dev_type = dev->dev_type;
pm8001_device->dcompletion = &completion;
if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
if (parent_dev && dev_is_expander(parent_dev->dev_type)) {
int phy_id;
struct ex_phy *phy;
for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys;

View File

@ -103,7 +103,6 @@ do { \
#define PM8001_READ_VPD
#define DEV_IS_EXPANDER(type) ((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE))
#define IS_SPCV_12G(dev) ((dev->device == 0X8074) \
|| (dev->device == 0X8076) \
|| (dev->device == 0X8077) \

View File

@ -2066,7 +2066,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
(status != IO_UNDERFLOW)) {
if (!((t->dev->parent) &&
(DEV_IS_EXPANDER(t->dev->parent->dev_type)))) {
(dev_is_expander(t->dev->parent->dev_type)))) {
for (i = 0 , j = 4; i <= 3 && j <= 7; i++ , j++)
sata_addr_low[i] = pm8001_ha->sas_addr[j];
for (i = 0 , j = 0; i <= 3 && j <= 3; i++ , j++)
@ -4561,7 +4561,7 @@ static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
pm8001_dev->dev_type == SAS_FANOUT_EXPANDER_DEVICE)
stp_sspsmp_sata = 0x01; /*ssp or smp*/
}
if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
if (parent_dev && dev_is_expander(parent_dev->dev_type))
phy_id = parent_dev->ex_dev.ex_phy->phy_id;
else
phy_id = pm8001_dev->attached_phy;

View File

@ -207,8 +207,7 @@ struct sas_work {
struct work_struct work;
};
/* Lots of code duplicates this in the SCSI tree, which can be factored out */
static inline bool sas_dev_type_is_expander(enum sas_device_type type)
static inline bool dev_is_expander(enum sas_device_type type)
{
return type == SAS_EDGE_EXPANDER_DEVICE ||
type == SAS_FANOUT_EXPANDER_DEVICE;