diff --git a/arch/i386/pci/direct.c b/arch/i386/pci/direct.c
index 94331d6be7a3..e3ac502bf2fb 100644
--- a/arch/i386/pci/direct.c
+++ b/arch/i386/pci/direct.c
@@ -13,7 +13,7 @@
 #define PCI_CONF1_ADDRESS(bus, devfn, reg) \
 	(0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
 
-static int pci_conf1_read(unsigned int seg, unsigned int bus,
+int pci_conf1_read(unsigned int seg, unsigned int bus,
 			  unsigned int devfn, int reg, int len, u32 *value)
 {
 	unsigned long flags;
@@ -42,7 +42,7 @@ static int pci_conf1_read(unsigned int seg, unsigned int bus,
 	return 0;
 }
 
-static int pci_conf1_write(unsigned int seg, unsigned int bus,
+int pci_conf1_write(unsigned int seg, unsigned int bus,
 			   unsigned int devfn, int reg, int len, u32 value)
 {
 	unsigned long flags;
diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c
index dfbf80cff834..cc787a7c030c 100644
--- a/arch/i386/pci/mmconfig.c
+++ b/arch/i386/pci/mmconfig.c
@@ -30,10 +30,8 @@ static u32 get_base_addr(unsigned int seg, int bus)
 	while (1) {
 		++cfg_num;
 		if (cfg_num >= pci_mmcfg_config_num) {
-			/* something bad is going on, no cfg table is found. */
-			/* so we fall back to the old way we used to do this */
-			/* and just rely on the first entry to be correct. */
-			return pci_mmcfg_config[0].base_address;
+			/* Not found - fallback to type 1 */
+			return 0;
 		}
 		cfg = &pci_mmcfg_config[cfg_num];
 		if (cfg->pci_segment_group_number != seg)
@@ -44,9 +42,9 @@ static u32 get_base_addr(unsigned int seg, int bus)
 	}
 }
 
-static inline void pci_exp_set_dev_base(unsigned int seg, int bus, int devfn)
+static inline void pci_exp_set_dev_base(unsigned int base, int bus, int devfn)
 {
-	u32 dev_base = get_base_addr(seg, bus) | (bus << 20) | (devfn << 12);
+	u32 dev_base = base | (bus << 20) | (devfn << 12);
 	if (dev_base != mmcfg_last_accessed_device) {
 		mmcfg_last_accessed_device = dev_base;
 		set_fixmap_nocache(FIX_PCIE_MCFG, dev_base);
@@ -57,13 +55,18 @@ static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
 			  unsigned int devfn, int reg, int len, u32 *value)
 {
 	unsigned long flags;
+	u32 base;
 
 	if (!value || (bus > 255) || (devfn > 255) || (reg > 4095))
 		return -EINVAL;
 
+	base = get_base_addr(seg, bus);
+	if (!base)
+		return pci_conf1_read(seg,bus,devfn,reg,len,value);
+
 	spin_lock_irqsave(&pci_config_lock, flags);
 
-	pci_exp_set_dev_base(seg, bus, devfn);
+	pci_exp_set_dev_base(base, bus, devfn);
 
 	switch (len) {
 	case 1:
@@ -86,13 +89,18 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
 			   unsigned int devfn, int reg, int len, u32 value)
 {
 	unsigned long flags;
+	u32 base;
 
 	if ((bus > 255) || (devfn > 255) || (reg > 4095)) 
 		return -EINVAL;
 
+	base = get_base_addr(seg, bus);
+	if (!base)
+		return pci_conf1_write(seg,bus,devfn,reg,len,value);
+
 	spin_lock_irqsave(&pci_config_lock, flags);
 
-	pci_exp_set_dev_base(seg, bus, devfn);
+	pci_exp_set_dev_base(base, bus, devfn);
 
 	switch (len) {
 	case 1:
diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h
index 127d53ad16be..f550781ec310 100644
--- a/arch/i386/pci/pci.h
+++ b/arch/i386/pci/pci.h
@@ -74,3 +74,10 @@ extern spinlock_t pci_config_lock;
 
 extern int (*pcibios_enable_irq)(struct pci_dev *dev);
 extern void (*pcibios_disable_irq)(struct pci_dev *dev);
+
+extern int pci_conf1_write(unsigned int seg, unsigned int bus,
+			   unsigned int devfn, int reg, int len, u32 value);
+extern int pci_conf1_read(unsigned int seg, unsigned int bus,
+			  unsigned int devfn, int reg, int len, u32 *value);
+
+
diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c
index a0838c4a94e4..22ff1b07d4e0 100644
--- a/arch/x86_64/pci/mmconfig.c
+++ b/arch/x86_64/pci/mmconfig.c
@@ -19,7 +19,7 @@ struct mmcfg_virt {
 };
 static struct mmcfg_virt *pci_mmcfg_virt;
 
-static char *get_virt(unsigned int seg, int bus)
+static char *get_virt(unsigned int seg, unsigned bus)
 {
 	int cfg_num = -1;
 	struct acpi_table_mcfg_config *cfg;
@@ -27,10 +27,9 @@ static char *get_virt(unsigned int seg, int bus)
 	while (1) {
 		++cfg_num;
 		if (cfg_num >= pci_mmcfg_config_num) {
-			/* something bad is going on, no cfg table is found. */
-			/* so we fall back to the old way we used to do this */
-			/* and just rely on the first entry to be correct. */
-			return pci_mmcfg_virt[0].virt;
+			/* Not found - fall back to type 1. This happens
+			   e.g. on the internal devices of a K8 northbridge. */
+			return NULL;
 		}
 		cfg = pci_mmcfg_virt[cfg_num].cfg;
 		if (cfg->pci_segment_group_number != seg)
@@ -43,18 +42,25 @@ static char *get_virt(unsigned int seg, int bus)
 
 static inline char *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
 {
-
-	return get_virt(seg, bus) + ((bus << 20) | (devfn << 12));
+	char *addr = get_virt(seg, bus);
+	if (!addr)
+		return NULL;
+ 	return addr + ((bus << 20) | (devfn << 12));
 }
 
 static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
 			  unsigned int devfn, int reg, int len, u32 *value)
 {
-	char *addr = pci_dev_base(seg, bus, devfn);
+	char *addr;
 
+	/* Why do we have this when nobody checks it. How about a BUG()!? -AK */
 	if (unlikely(!value || (bus > 255) || (devfn > 255) || (reg > 4095)))
 		return -EINVAL;
 
+	addr = pci_dev_base(seg, bus, devfn);
+	if (!addr)
+		return pci_conf1_read(seg,bus,devfn,reg,len,value);
+
 	switch (len) {
 	case 1:
 		*value = readb(addr + reg);
@@ -73,11 +79,16 @@ static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
 static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
 			   unsigned int devfn, int reg, int len, u32 value)
 {
-	char *addr = pci_dev_base(seg, bus, devfn);
+	char *addr;
 
+	/* Why do we have this when nobody checks it. How about a BUG()!? -AK */
 	if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095)))
 		return -EINVAL;
 
+	addr = pci_dev_base(seg, bus, devfn);
+	if (!addr)
+		return pci_conf1_write(seg,bus,devfn,reg,len,value);
+
 	switch (len) {
 	case 1:
 		writeb(value, addr + reg);