diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 45839e53538e..b6b253924893 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -103,22 +103,52 @@ internal-regs {
 			#size-cells = <1>;
 			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
 
-			mbusc: mbus-controller@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
+			rtc@10300 {
+				compatible = "marvell,orion-rtc";
+				reg = <0x10300 0x20>;
+				interrupts = <50>;
 			};
 
-			mpic: interrupt-controller@20000 {
-				compatible = "marvell,mpic";
-				#interrupt-cells = <1>;
-				#size-cells = <1>;
-				interrupt-controller;
-				msi-controller;
+			spi0: spi@10600 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10600 0x28>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <30>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
 			};
 
-			coherency-fabric@20200 {
-				compatible = "marvell,coherency-fabric";
-				reg = <0x20200 0xb0>, <0x21010 0x1c>;
+			spi1: spi@10680 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10680 0x28>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <92>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <31>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <32>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
 			};
 
 			serial@12000 {
@@ -146,81 +176,29 @@ coredivclk: corediv-clock@18740 {
 				clock-output-names = "nand";
 			};
 
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			mpic: interrupt-controller@20000 {
+				compatible = "marvell,mpic";
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+			};
+
+			coherency-fabric@20200 {
+				compatible = "marvell,coherency-fabric";
+				reg = <0x20200 0xb0>, <0x21010 0x1c>;
+			};
+
 			timer@20300 {
 				reg = <0x20300 0x30>, <0x21040 0x30>;
 				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
 			};
 
-			sata@a0000 {
-				compatible = "marvell,orion-sata";
-				reg = <0xa0000 0x5000>;
-				interrupts = <55>;
-				clocks = <&gateclk 15>, <&gateclk 30>;
-				clock-names = "0", "1";
-				status = "disabled";
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "marvell,orion-mdio";
-				reg = <0x72004 0x4>;
-			};
-
-			eth0: ethernet@70000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x70000 0x4000>;
-				interrupts = <8>;
-				clocks = <&gateclk 4>;
-				status = "disabled";
-			};
-
-			eth1: ethernet@74000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x74000 0x4000>;
-				interrupts = <10>;
-				clocks = <&gateclk 3>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <31>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <32>;
-				timeout-ms = <1000>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			rtc@10300 {
-				compatible = "marvell,orion-rtc";
-				reg = <0x10300 0x20>;
-				interrupts = <50>;
-			};
-
-			mvsdio@d4000 {
-				compatible = "marvell,orion-sdio";
-				reg = <0xd4000 0x200>;
-				interrupts = <54>;
-				clocks = <&gateclk 17>;
-				bus-width = <4>;
-				cap-sdio-irq;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				status = "disabled";
-			};
-
 			usb@50000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x50000 0x500>;
@@ -235,25 +213,35 @@ usb@51000 {
 				status = "disabled";
 			};
 
-			spi0: spi@10600 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10600 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <30>;
-				clocks = <&coreclk 0>;
+			eth0: ethernet@70000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x70000 0x4000>;
+				interrupts = <8>;
+				clocks = <&gateclk 4>;
 				status = "disabled";
 			};
 
-			spi1: spi@10680 {
-				compatible = "marvell,orion-spi";
-				reg = <0x10680 0x28>;
+			mdio {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <92>;
-				clocks = <&coreclk 0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x72004 0x4>;
+			};
+
+			eth1: ethernet@74000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x74000 0x4000>;
+				interrupts = <10>;
+				clocks = <&gateclk 3>;
+				status = "disabled";
+			};
+
+			sata@a0000 {
+				compatible = "marvell,orion-sata";
+				reg = <0xa0000 0x5000>;
+				interrupts = <55>;
+				clocks = <&gateclk 15>, <&gateclk 30>;
+				clock-names = "0", "1";
 				status = "disabled";
 			};
 
@@ -266,6 +254,18 @@ nand@d0000 {
 				clocks = <&coredivclk 0>;
 				status = "disabled";
 			};
+
+			mvsdio@d4000 {
+				compatible = "marvell,orion-sdio";
+				reg = <0xd4000 0x200>;
+				interrupts = <54>;
+				clocks = <&gateclk 17>;
+				bus-width = <4>;
+				cap-sdio-irq;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				status = "disabled";
+			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 7a4b82e71aaf..0d8530c98cf5 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -91,11 +91,6 @@ pcie@2,0 {
 		};
 
 		internal-regs {
-			system-controller@18200 {
-				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x100>;
-			};
-
 			L2: l2-cache {
 				compatible = "marvell,aurora-outer-cache";
 				reg = <0x08000 0x1000>;
@@ -103,8 +98,17 @@ L2: l2-cache {
 				wt-override;
 			};
 
-			interrupt-controller@20000 {
-				reg = <0x20a00 0x1d0>, <0x21870 0x58>;
+			i2c0: i2c@11000 {
+				reg = <0x11000 0x20>;
+			};
+
+			i2c1: i2c@11100 {
+				reg = <0x11100 0x20>;
+			};
+
+			system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x100>;
 			};
 
 			pinctrl {
@@ -163,9 +167,11 @@ gpio2: gpio@18180 {
 				interrupts = <91>;
 			};
 
-			timer@20300 {
-				compatible = "marvell,armada-370-timer";
-				clocks = <&coreclk 2>;
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-370-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
 			};
 
 			coreclk: mvebu-sar@18230 {
@@ -174,11 +180,28 @@ coreclk: mvebu-sar@18230 {
 				#clock-cells = <1>;
 			};
 
-			gateclk: clock-gating-control@18220 {
-				compatible = "marvell,armada-370-gating-clock";
-				reg = <0x18220 0x4>;
+			thermal@18300 {
+				compatible = "marvell,armada370-thermal";
+				reg = <0x18300 0x4
+					0x18304 0x4>;
+				status = "okay";
+			};
+
+			interrupt-controller@20000 {
+				reg = <0x20a00 0x1d0>, <0x21870 0x58>;
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-370-timer";
+				clocks = <&coreclk 2>;
+			};
+
+			usb@50000 {
+				clocks = <&coreclk 0>;
+			};
+
+			usb@51000 {
 				clocks = <&coreclk 0>;
-				#clock-cells = <1>;
 			};
 
 			xor@60800 {
@@ -218,29 +241,6 @@ xor11 {
 					dmacap,memset;
 				};
 			};
-
-			i2c0: i2c@11000 {
-				reg = <0x11000 0x20>;
-			};
-
-			i2c1: i2c@11100 {
-				reg = <0x11100 0x20>;
-			};
-
-			usb@50000 {
-				clocks = <&coreclk 0>;
-			};
-
-			usb@51000 {
-				clocks = <&coreclk 0>;
-			};
-
-			thermal@18300 {
-				compatible = "marvell,armada370-thermal";
-				reg = <0x18300 0x4
-					0x18304 0x4>;
-				status = "okay";
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 281c6447e872..4919fb82ac62 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -42,13 +42,14 @@ L2: l2-cache {
 				wt-override;
 			};
 
-			interrupt-controller@20000 {
-			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x100>;
 			};
 
-			armada-370-xp-pmsu@22000 {
-				compatible = "marvell,armada-370-xp-pmsu";
-				reg = <0x22100 0x430>, <0x20800 0x20>;
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x100>;
 			};
 
 			serial@12200 {
@@ -68,23 +69,9 @@ serial@12300 {
 				status = "disabled";
 			};
 
-			timer@20300 {
-				compatible = "marvell,armada-xp-timer";
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			coreclk: mvebu-sar@18230 {
-				compatible = "marvell,armada-xp-core-clock";
-				reg = <0x18230 0x08>;
-				#clock-cells = <1>;
-			};
-
-			cpuclk: clock-complex@18700 {
-				#clock-cells = <1>;
-				compatible = "marvell,armada-xp-cpu-clock";
-				reg = <0x18700 0xA0>;
-				clocks = <&coreclk 1>;
+			system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x500>;
 			};
 
 			gateclk: clock-gating-control@18220 {
@@ -94,9 +81,39 @@ gateclk: clock-gating-control@18220 {
 				#clock-cells = <1>;
 			};
 
-			system-controller@18200 {
-				compatible = "marvell,armada-370-xp-system-controller";
-				reg = <0x18200 0x500>;
+			coreclk: mvebu-sar@18230 {
+				compatible = "marvell,armada-xp-core-clock";
+				reg = <0x18230 0x08>;
+				#clock-cells = <1>;
+			};
+
+			thermal@182b0 {
+				compatible = "marvell,armadaxp-thermal";
+				reg = <0x182b0 0x4
+					0x184d0 0x4>;
+				status = "okay";
+			};
+
+			cpuclk: clock-complex@18700 {
+				#clock-cells = <1>;
+				compatible = "marvell,armada-xp-cpu-clock";
+				reg = <0x18700 0xA0>;
+				clocks = <&coreclk 1>;
+			};
+
+			interrupt-controller@20000 {
+			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-xp-timer";
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			armada-370-xp-pmsu@22000 {
+				compatible = "marvell,armada-370-xp-pmsu";
+				reg = <0x22100 0x430>, <0x20800 0x20>;
 			};
 
 			eth2: ethernet@30000 {
@@ -107,6 +124,22 @@ eth2: ethernet@30000 {
 				status = "disabled";
 			};
 
+			usb@50000 {
+				clocks = <&gateclk 18>;
+			};
+
+			usb@51000 {
+				clocks = <&gateclk 19>;
+			};
+
+			usb@52000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x52000 0x500>;
+				interrupts = <47>;
+				clocks = <&gateclk 20>;
+				status = "disabled";
+			};
+
 			xor@60900 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60900 0x100
@@ -146,39 +179,6 @@ xor01 {
 					dmacap,memset;
 				};
 			};
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x100>;
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x100>;
-			};
-
-			usb@50000 {
-				clocks = <&gateclk 18>;
-			};
-
-			usb@51000 {
-				clocks = <&gateclk 19>;
-			};
-
-			usb@52000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x52000 0x500>;
-				interrupts = <47>;
-				clocks = <&gateclk 20>;
-				status = "disabled";
-			};
-
-			thermal@182b0 {
-				compatible = "marvell,armadaxp-thermal";
-				reg = <0x182b0 0x4
-					0x184d0 0x4>;
-				status = "okay";
-			};
 		};
 	};
 
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index db24b41a5264..852db2860015 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -107,60 +107,29 @@ internal-regs {
 				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
 				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
 
-			mbusc: mbus-ctrl@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x80>, <0x800100 0x8>;
-			};
-
-			timer: timer@20300 {
-				compatible = "marvell,orion-timer";
-				reg = <0x20300 0x20>;
-				interrupt-parent = <&bridge_intc>;
-				interrupts = <1>, <2>;
+			spi0: spi-ctrl@10600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <6>;
+				reg = <0x10600 0x28>;
 				clocks = <&core_clk 0>;
+				pinctrl-0 = <&pmx_spi0>;
+				pinctrl-names = "default";
+				status = "disabled";
 			};
 
-			intc: main-interrupt-ctrl@20200 {
-				compatible = "marvell,orion-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x20200 0x10>, <0x20210 0x10>;
-			};
-
-			bridge_intc: bridge-interrupt-ctrl@20110 {
-				compatible = "marvell,orion-bridge-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x20110 0x8>;
-				interrupts = <0>;
-				marvell,#interrupts = <5>;
-			};
-
-			pmu_intc: pmu-interrupt-ctrl@d0050 {
-				compatible = "marvell,dove-pmu-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0xd0050 0x8>;
-				interrupts = <33>;
-				marvell,#interrupts = <7>;
-			};
-
-			core_clk: core-clocks@d0214 {
-				compatible = "marvell,dove-core-clock";
-				reg = <0xd0214 0x4>;
-				#clock-cells = <1>;
-			};
-
-			gate_clk: clock-gating-ctrl@d0038 {
-				compatible = "marvell,dove-gating-clock";
-				reg = <0xd0038 0x4>;
+			i2c0: i2c-ctrl@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <11>;
+				clock-frequency = <400000>;
+				timeout-ms = <1000>;
 				clocks = <&core_clk 0>;
-				#clock-cells = <1>;
-			};
-
-			thermal: thermal-diode@d001c {
-				compatible = "marvell,dove-thermal";
-				reg = <0xd001c 0x0c>, <0xd005c 0x08>;
+				status = "disabled";
 			};
 
 			uart0: serial@12000 {
@@ -201,34 +170,213 @@ uart3: serial@12300 {
 				status = "disabled";
 			};
 
-			gpio0: gpio-ctrl@d0400 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xd0400 0x20>;
-				ngpios = <32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <12>, <13>, <14>, <60>;
+			spi1: spi-ctrl@14600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <5>;
+				reg = <0x14600 0x28>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
 			};
 
-			gpio1: gpio-ctrl@d0420 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xd0420 0x20>;
-				ngpios = <32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <61>;
+			mbusc: mbus-ctrl@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x80>, <0x800100 0x8>;
 			};
 
-			gpio2: gpio-ctrl@e8400 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xe8400 0x0c>;
-				ngpios = <8>;
+			bridge_intc: bridge-interrupt-ctrl@20110 {
+				compatible = "marvell,orion-bridge-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20110 0x8>;
+				interrupts = <0>;
+				marvell,#interrupts = <5>;
+			};
+
+			intc: main-interrupt-ctrl@20200 {
+				compatible = "marvell,orion-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20200 0x10>, <0x20210 0x10>;
+			};
+
+			timer: timer@20300 {
+				compatible = "marvell,orion-timer";
+				reg = <0x20300 0x20>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <1>, <2>;
+				clocks = <&core_clk 0>;
+			};
+
+			crypto: crypto-engine@30000 {
+				compatible = "marvell,orion-crypto";
+				reg = <0x30000 0x10000>,
+				      <0xffffe000 0x800>;
+				reg-names = "regs", "sram";
+				interrupts = <31>;
+				clocks = <&gate_clk 15>;
+				status = "okay";
+			};
+
+			ehci0: usb-host@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x1000>;
+				interrupts = <24>;
+				clocks = <&gate_clk 0>;
+				status = "okay";
+			};
+
+			ehci1: usb-host@51000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x51000 0x1000>;
+				interrupts = <25>;
+				clocks = <&gate_clk 1>;
+				status = "okay";
+			};
+
+			xor0: dma-engine@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60a00 0x100>;
+				clocks = <&gate_clk 23>;
+				status = "okay";
+
+				channel0 {
+					interrupts = <39>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+
+				channel1 {
+					interrupts = <40>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+			};
+
+			xor1: dma-engine@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gate_clk 24>;
+				status = "okay";
+
+				channel0 {
+					interrupts = <42>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+
+				channel1 {
+					interrupts = <43>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+			};
+
+			sdio1: sdio-host@90000 {
+				compatible = "marvell,dove-sdhci";
+				reg = <0x90000 0x100>;
+				interrupts = <36>, <38>;
+				clocks = <&gate_clk 9>;
+				pinctrl-0 = <&pmx_sdio1>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			eth: ethernet-ctrl@72000 {
+				compatible = "marvell,orion-eth";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72000 0x4000>;
+				clocks = <&gate_clk 2>;
+				marvell,tx-checksum-limit = <1600>;
+				status = "disabled";
+
+				ethernet-port@0 {
+					device_type = "network";
+					compatible = "marvell,orion-eth-port";
+					reg = <0>;
+					interrupts = <29>;
+					/* overwrite MAC address in bootloader */
+					local-mac-address = [00 00 00 00 00 00];
+					phy-handle = <&ethphy>;
+				};
+			};
+
+			mdio: mdio-bus@72004 {
+				compatible = "marvell,orion-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72004 0x84>;
+				interrupts = <30>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+
+				ethphy: ethernet-phy {
+					device_type = "ethernet-phy";
+					/* set phy address in board file */
+				};
+			};
+
+			sdio0: sdio-host@92000 {
+				compatible = "marvell,dove-sdhci";
+				reg = <0x92000 0x100>;
+				interrupts = <35>, <37>;
+				clocks = <&gate_clk 8>;
+				pinctrl-0 = <&pmx_sdio0>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sata0: sata-host@a0000 {
+				compatible = "marvell,orion-sata";
+				reg = <0xa0000 0x2400>;
+				interrupts = <62>;
+				clocks = <&gate_clk 3>;
+				nr-ports = <1>;
+				status = "disabled";
+			};
+
+			audio0: audio-controller@b0000 {
+				compatible = "marvell,dove-audio";
+				reg = <0xb0000 0x2210>;
+				interrupts = <19>, <20>;
+				clocks = <&gate_clk 12>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
+			audio1: audio-controller@b4000 {
+				compatible = "marvell,dove-audio";
+				reg = <0xb4000 0x2210>;
+				interrupts = <21>, <22>;
+				clocks = <&gate_clk 13>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
+			thermal: thermal-diode@d001c {
+				compatible = "marvell,dove-thermal";
+				reg = <0xd001c 0x0c>, <0xd005c 0x08>;
+			};
+
+			gate_clk: clock-gating-ctrl@d0038 {
+				compatible = "marvell,dove-gating-clock";
+				reg = <0xd0038 0x4>;
+				clocks = <&core_clk 0>;
+				#clock-cells = <1>;
+			};
+
+			pmu_intc: pmu-interrupt-ctrl@d0050 {
+				compatible = "marvell,dove-pmu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd0050 0x8>;
+				interrupts = <33>;
+				marvell,#interrupts = <7>;
 			};
 
 			pinctrl: pin-ctrl@d0200 {
@@ -422,85 +570,32 @@ pmx_nand_gpo: pmx-nand-gpo {
 				};
 			};
 
-			spi0: spi-ctrl@10600 {
-				compatible = "marvell,orion-spi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <6>;
-				reg = <0x10600 0x28>;
-				clocks = <&core_clk 0>;
-				pinctrl-0 = <&pmx_spi0>;
-				pinctrl-names = "default";
-				status = "disabled";
+			core_clk: core-clocks@d0214 {
+				compatible = "marvell,dove-core-clock";
+				reg = <0xd0214 0x4>;
+				#clock-cells = <1>;
 			};
 
-			spi1: spi-ctrl@14600 {
-				compatible = "marvell,orion-spi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <5>;
-				reg = <0x14600 0x28>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
+			gpio0: gpio-ctrl@d0400 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0xd0400 0x20>;
+				ngpios = <32>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <12>, <13>, <14>, <60>;
 			};
 
-			i2c0: i2c-ctrl@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <11>;
-				clock-frequency = <400000>;
-				timeout-ms = <1000>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			ehci0: usb-host@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x50000 0x1000>;
-				interrupts = <24>;
-				clocks = <&gate_clk 0>;
-				status = "okay";
-			};
-
-			ehci1: usb-host@51000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x51000 0x1000>;
-				interrupts = <25>;
-				clocks = <&gate_clk 1>;
-				status = "okay";
-			};
-
-			sdio0: sdio-host@92000 {
-				compatible = "marvell,dove-sdhci";
-				reg = <0x92000 0x100>;
-				interrupts = <35>, <37>;
-				clocks = <&gate_clk 8>;
-				pinctrl-0 = <&pmx_sdio0>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			sdio1: sdio-host@90000 {
-				compatible = "marvell,dove-sdhci";
-				reg = <0x90000 0x100>;
-				interrupts = <36>, <38>;
-				clocks = <&gate_clk 9>;
-				pinctrl-0 = <&pmx_sdio1>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			sata0: sata-host@a0000 {
-				compatible = "marvell,orion-sata";
-				reg = <0xa0000 0x2400>;
-				interrupts = <62>;
-				clocks = <&gate_clk 3>;
-				nr-ports = <1>;
-				status = "disabled";
+			gpio1: gpio-ctrl@d0420 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0xd0420 0x20>;
+				ngpios = <32>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <61>;
 			};
 
 			rtc: real-time-clock@d8500 {
@@ -510,107 +605,12 @@ rtc: real-time-clock@d8500 {
 				interrupts = <5>;
 			};
 
-			crypto: crypto-engine@30000 {
-				compatible = "marvell,orion-crypto";
-				reg = <0x30000 0x10000>,
-				      <0xffffe000 0x800>;
-				reg-names = "regs", "sram";
-				interrupts = <31>;
-				clocks = <&gate_clk 15>;
-				status = "okay";
-			};
-
-			xor0: dma-engine@60800 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60a00 0x100>;
-				clocks = <&gate_clk 23>;
-				status = "okay";
-
-				channel0 {
-					interrupts = <39>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-
-				channel1 {
-					interrupts = <40>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-			};
-
-			xor1: dma-engine@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gate_clk 24>;
-				status = "okay";
-
-				channel0 {
-					interrupts = <42>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-
-				channel1 {
-					interrupts = <43>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-			};
-
-			mdio: mdio-bus@72004 {
-				compatible = "marvell,orion-mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72004 0x84>;
-				interrupts = <30>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-
-				ethphy: ethernet-phy {
-					device_type = "ethernet-phy";
-					/* set phy address in board file */
-				};
-			};
-
-			eth: ethernet-ctrl@72000 {
-				compatible = "marvell,orion-eth";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72000 0x4000>;
-				clocks = <&gate_clk 2>;
-				marvell,tx-checksum-limit = <1600>;
-				status = "disabled";
-
-				ethernet-port@0 {
-					device_type = "network";
-					compatible = "marvell,orion-eth-port";
-					reg = <0>;
-					interrupts = <29>;
-					/* overwrite MAC address in bootloader */
-					local-mac-address = [00 00 00 00 00 00];
-					phy-handle = <&ethphy>;
-				};
-			};
-
-			audio0: audio-controller@b0000 {
-				compatible = "marvell,dove-audio";
-				reg = <0xb0000 0x2210>;
-				interrupts = <19>, <20>;
-				clocks = <&gate_clk 12>;
-				clock-names = "internal";
-				status = "disabled";
-			};
-
-			audio1: audio-controller@b4000 {
-				compatible = "marvell,dove-audio";
-				reg = <0xb4000 0x2210>;
-				interrupts = <21>, <22>;
-				clocks = <&gate_clk 13>;
-				clock-names = "internal";
-				status = "disabled";
+			gpio2: gpio-ctrl@e8400 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0xe8400 0x0c>;
+				ngpios = <8>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index dd58a25a4166..1da94c187085 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -70,39 +70,21 @@ ocp@f1000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		mbusc: mbus-controller@20000 {
-			compatible = "marvell,mbus-controller";
-			reg = <0x20000 0x80>, <0x1500 0x20>;
-		};
-
-		timer: timer@20300 {
-			compatible = "marvell,orion-timer";
-			reg = <0x20300 0x20>;
-			interrupt-parent = <&bridge_intc>;
-			interrupts = <1>, <2>;
-			clocks = <&core_clk 0>;
-		};
-
-		intc: main-interrupt-ctrl@20200 {
-			compatible = "marvell,orion-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x20200 0x10>, <0x20210 0x10>;
-		};
-
-		bridge_intc: bridge-interrupt-ctrl@20110 {
-			compatible = "marvell,orion-bridge-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x20110 0x8>;
-			interrupts = <1>;
-			marvell,#interrupts = <6>;
-		};
-
 		core_clk: core-clocks@10030 {
 			compatible = "marvell,kirkwood-core-clock";
 			reg = <0x10030 0x4>;
-	        	#clock-cells = <1>;
+			#clock-cells = <1>;
+		};
+
+		spi@10600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <23>;
+			reg = <0x10600 0x28>;
+			clocks = <&gate_clk 7>;
+			status = "disabled";
 		};
 
 		gpio0: gpio@10100 {
@@ -129,6 +111,17 @@ gpio1: gpio@10140 {
 			clocks = <&gate_clk 7>;
 		};
 
+		i2c@11000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <29>;
+			clock-frequency = <100000>;
+			clocks = <&gate_clk 7>;
+			status = "disabled";
+		};
+
 		serial@12000 {
 			compatible = "ns16550a";
 			reg = <0x12000 0x100>;
@@ -147,15 +140,18 @@ serial@12100 {
 			status = "disabled";
 		};
 
-		spi@10600 {
-			compatible = "marvell,orion-spi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			interrupts = <23>;
-			reg = <0x10600 0x28>;
-			clocks = <&gate_clk 7>;
-			status = "disabled";
+		mbusc: mbus-controller@20000 {
+			compatible = "marvell,mbus-controller";
+			reg = <0x20000 0x80>, <0x1500 0x20>;
+		};
+
+		bridge_intc: bridge-interrupt-ctrl@20110 {
+			compatible = "marvell,orion-bridge-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20110 0x8>;
+			interrupts = <1>;
+			marvell,#interrupts = <6>;
 		};
 
 		gate_clk: clock-gating-control@2011c {
@@ -165,6 +161,21 @@ gate_clk: clock-gating-control@2011c {
 			#clock-cells = <1>;
 		};
 
+		intc: main-interrupt-ctrl@20200 {
+			compatible = "marvell,orion-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20200 0x10>, <0x20210 0x10>;
+		};
+
+		timer: timer@20300 {
+			compatible = "marvell,orion-timer";
+			reg = <0x20300 0x20>;
+			interrupt-parent = <&bridge_intc>;
+			interrupts = <1>, <2>;
+			clocks = <&core_clk 0>;
+		};
+
 		wdt: watchdog-timer@20300 {
 			compatible = "marvell,orion-wdt";
 			reg = <0x20300 0x28>;
@@ -174,6 +185,14 @@ wdt: watchdog-timer@20300 {
 			status = "okay";
 		};
 
+		ehci@50000 {
+			compatible = "marvell,orion-ehci";
+			reg = <0x50000 0x1000>;
+			interrupts = <19>;
+			clocks = <&gate_clk 3>;
+			status = "okay";
+		};
+
 		xor@60800 {
 			compatible = "marvell,orion-xor";
 			reg = <0x60800 0x100
@@ -214,37 +233,6 @@ xor01 {
 			};
 		};
 
-		ehci@50000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0x50000 0x1000>;
-			interrupts = <19>;
-			clocks = <&gate_clk 3>;
-			status = "okay";
-		};
-
-		i2c@11000 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0x11000 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <29>;
-			clock-frequency = <100000>;
-			clocks = <&gate_clk 7>;
-			status = "disabled";
-		};
-
-		mdio: mdio-bus@72004 {
-			compatible = "marvell,orion-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x72004 0x84>;
-			interrupts = <46>;
-			clocks = <&gate_clk 0>;
-			status = "disabled";
-
-			/* add phy nodes in board file */
-		};
-
 		eth0: ethernet-controller@72000 {
 			compatible = "marvell,kirkwood-eth";
 			#address-cells = <1>;
@@ -265,6 +253,18 @@ ethernet0-port@0 {
 			};
 		};
 
+		mdio: mdio-bus@72004 {
+			compatible = "marvell,orion-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72004 0x84>;
+			interrupts = <46>;
+			clocks = <&gate_clk 0>;
+			status = "disabled";
+
+			/* add phy nodes in board file */
+		};
+
 		eth1: ethernet-controller@76000 {
 			compatible = "marvell,kirkwood-eth";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index e06c37e91ac6..9f51538cd9ef 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -42,6 +42,25 @@ gpio0: gpio@10100 {
 			interrupts = <6>, <7>, <8>, <9>;
 		};
 
+		spi@10600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			reg = <0x10600 0x28>;
+			status = "disabled";
+		};
+
+		i2c@11000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <5>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
 		serial@12000 {
 			compatible = "ns16550a";
 			reg = <0x12000 0x100>;
@@ -60,15 +79,6 @@ serial@12100 {
 			status = "disabled";
 		};
 
-		spi@10600 {
-			compatible = "marvell,orion-spi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			reg = <0x10600 0x28>;
-			status = "disabled";
-		};
-
 		wdt@20300 {
 			compatible = "marvell,orion-wdt";
 			reg = <0x20300 0x28>;
@@ -82,30 +92,6 @@ ehci@50000 {
 			status = "disabled";
 		};
 
-		ehci@a0000 {
-			compatible = "marvell,orion-ehci";
-			reg = <0xa0000 0x1000>;
-			interrupts = <12>;
-			status = "disabled";
-		};
-
-		sata@80000 {
-			compatible = "marvell,orion-sata";
-			reg = <0x80000 0x5000>;
-			interrupts = <29>;
-			status = "disabled";
-		};
-
-		i2c@11000 {
-			compatible = "marvell,mv64xxx-i2c";
-			reg = <0x11000 0x20>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <5>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
 		xor@60900 {
 			compatible = "marvell,orion-xor";
 			reg = <0x60900 0x100
@@ -125,26 +111,6 @@ xor01 {
 			};
 		};
 
-		crypto@90000 {
-			compatible = "marvell,orion-crypto";
-			reg = <0x90000 0x10000>,
-			      <0xf2200000 0x800>;
-			reg-names = "regs", "sram";
-			interrupts = <28>;
-			status = "okay";
-		};
-
-		mdio: mdio-bus@72004 {
-			compatible = "marvell,orion-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x72004 0x84>;
-			interrupts = <22>;
-			status = "disabled";
-
-			/* add phy nodes in board file */
-		};
-
 		eth: ethernet-controller@72000 {
 			compatible = "marvell,orion-eth";
 			#address-cells = <1>;
@@ -162,5 +128,39 @@ ethernet-port@0 {
 				/* set phy-handle property in board file */
 			};
 		};
+
+		mdio: mdio-bus@72004 {
+			compatible = "marvell,orion-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72004 0x84>;
+			interrupts = <22>;
+			status = "disabled";
+
+			/* add phy nodes in board file */
+		};
+
+		sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <29>;
+			status = "disabled";
+		};
+
+		crypto@90000 {
+			compatible = "marvell,orion-crypto";
+			reg = <0x90000 0x10000>,
+			      <0xf2200000 0x800>;
+			reg-names = "regs", "sram";
+			interrupts = <28>;
+			status = "okay";
+		};
+
+		ehci@a0000 {
+			compatible = "marvell,orion-ehci";
+			reg = <0xa0000 0x1000>;
+			interrupts = <12>;
+			status = "disabled";
+		};
 	};
 };