Update for extcon-next v5.11

1. Add new TI TUSB320 USB-C extcon driver
 - The extcon-usbc-tusb320.c driver for the TI TUSB320 USB Type-C device
 support the USB Type C connector detection.
 
 2. Rewrite binding document in yaml for extcon-fsa9480.c
 and add new compatible name of TI TSU6111 device.
 
 3. Fix moalias string of extcon-max77693.c to fix the automated module
 loading when this driver is compiled as a module.
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEEsSpuqBtbWtRe4rLGnM3fLN7rz1MFAl/TLG0WHGN3MDAuY2hv
 aUBzYW1zdW5nLmNvbQAKCRCczd8s3uvPU9DtD/9Uc5XVukCbwuE504FBI06MbrxY
 wfY//RlE03zY2JCrIZzZYcf5CXMxMNBH2M15IlafpVI6cmPAxKwm1hcwDKIxfkOP
 /cCTvjvUE7nyVAn/ZgFfC9A1MjWo4lXigOmwiGZZ7wmMpFc6afHCtKVBbSjJuKt7
 AltgBNybENtvAxNg/m/nNzKbnovieOHV/qLYnm9aqo3kvT4vNRrzGStDlgpdAHtJ
 hyNPZp/OrddzZArb6jZQa8V49Q7Pb5R2SviIbIjrwMVE9Z/MgA6clWRWlKWt29u+
 dNTxQiR8NM2QFgjlZbc98a+xRkoi+Dss8HPAd+Wv+G812UHdSKO4vtcXWzDsihoo
 E7XWV6aJPBe6lHJCjNb9ONI5SwEn47Z2Qnw0Vacmo2Oh/jp4IB6hKjrXHhhiWcPH
 9NkegNAlpmWixlXq+te4IL2qnzFKDDtEzqx1zQIOYsngDnwU7BPt5Y/2ECNq3k5P
 eqdXby1IajAC1yOcbZSmd6DKYINAdMehkqqlN5QB9JHvvpG2F5Xkh+flvB+w/71r
 MvVV3nnUCU++QYYF9QpnBvc1lCW1l7wdiP3IZY/VGtyxN5NO4HmJETP4s1QuVa0n
 OduvdJDBxiUxhGJwdaZf0QOou+VOV+/WGxRHhhgYGHaTuykFP5MuFdTRtgfqRRrr
 xGdwCBX8mm7OkY5HCQ==
 =I15T
 -----END PGP SIGNATURE-----

Merge tag 'extcon-next-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update for extcon-next v5.11

1. Add new TI TUSB320 USB-C extcon driver
- The extcon-usbc-tusb320.c driver for the TI TUSB320 USB Type-C device
support the USB Type C connector detection.

2. Rewrite binding document in yaml for extcon-fsa9480.c
and add new compatible name of TI TSU6111 device.

3. Fix moalias string of extcon-max77693.c to fix the automated module
loading when this driver is compiled as a module.

* tag 'extcon-next-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
  extcon: max77693: Fix modalias string
  extcon: fsa9480: Support TI TSU6111 variant
  extcon: fsa9480: Rewrite bindings in YAML and extend
  dt-bindings: extcon: add binding for TUSB320
  extcon: Add driver for TI TUSB320

Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt

@@ -1,21 +0,0 @@
-FAIRCHILD SEMICONDUCTOR FSA9480 MICROUSB SWITCH
-
-The FSA9480 is a USB port accessory detector and switch. The FSA9480 is fully
-controlled using I2C and enables USB data, stereo and mono audio, video,
-microphone, and UART data to use a common connector port.
-
-Required properties:
- - compatible : Must be one of
-   "fcs,fsa9480"
-   "fcs,fsa880"
- - reg : Specifies i2c slave address. Must be 0x25.
- - interrupts : Should contain one entry specifying interrupt signal of
-   interrupt parent to which interrupt pin of the chip is connected.
-
- Example:
-	musb@25 {
-		compatible = "fcs,fsa9480";
-		reg = <0x25>;
-		interrupt-parent = <&gph2>;
-		interrupts = <7 0>;
-	};

Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml

@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/extcon-usbc-tusb320.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TUSB320 USB Type-C CC Logic controller
+
+maintainers:
+  - Michael Auchter <michael.auchter@ni.com>
+
+properties:
+  compatible:
+    const: ti,tusb320
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        tusb320@61 {
+            compatible = "ti,tusb320";
+            reg = <0x61>;
+            interrupt-parent = <&gpio>;
+            interrupts = <27 1>;
+        };
+    };
+...

Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/fcs,fsa880.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fairchild Semiconductor FSA880, FSA9480 and compatibles
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  The FSA880 and FSA9480 are USB port accessory detectors and switches.
+  The switch is fully controlled using I2C and enables USB data, stereo
+  and mono audio, video, microphone, and UART data to use a common
+  connector port. Compatible switches exist from other manufacturers.
+
+properties:
+  compatible:
+    enum:
+      - fcs,fsa880
+      - fcs,fsa9480
+      - ti,tsu6111
+
+  reg:
+    maxItems: 1
+    description: The I2C address for an FSA880 compatible device is
+      usually 0x25.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        usb-switch@25 {
+            compatible = "fcs,fsa880";
+            reg = <0x25>;
+            interrupt-parent = <&gpio>;
+            interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };

drivers/extcon/Kconfig

@@ -186,4 +186,12 @@ config EXTCON_USBC_CROS_EC
 	  Say Y here to enable USB Type C cable detection extcon support when
 	  using Chrome OS EC based USB Type-C ports.
 
+config EXTCON_USBC_TUSB320
+	tristate "TI TUSB320 USB-C extcon support"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y here to enable support for USB Type C cable detection extcon
+	  support using a TUSB320.
+
 endif

drivers/extcon/Makefile

@@ -25,3 +25,4 @@ obj-$(CONFIG_EXTCON_RT8973A)	+= extcon-rt8973a.o
 obj-$(CONFIG_EXTCON_SM5502)	+= extcon-sm5502.o
 obj-$(CONFIG_EXTCON_USB_GPIO)	+= extcon-usb-gpio.o
 obj-$(CONFIG_EXTCON_USBC_CROS_EC) += extcon-usbc-cros-ec.o
+obj-$(CONFIG_EXTCON_USBC_TUSB320) += extcon-usbc-tusb320.o

drivers/extcon/extcon-fsa9480.c

@@ -364,6 +364,7 @@ MODULE_DEVICE_TABLE(i2c, fsa9480_id);
 static const struct of_device_id fsa9480_of_match[] = {
 	{ .compatible = "fcs,fsa9480", },
 	{ .compatible = "fcs,fsa880", },
+	{ .compatible = "ti,tsu6111", },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, fsa9480_of_match);

drivers/extcon/extcon-max77693.c

@@ -1277,4 +1277,4 @@ module_platform_driver(max77693_muic_driver);
 MODULE_DESCRIPTION("Maxim MAX77693 Extcon driver");
 MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:extcon-max77693");
+MODULE_ALIAS("platform:max77693-muic");

drivers/extcon/extcon-usbc-tusb320.c

@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * drivers/extcon/extcon-tusb320.c - TUSB320 extcon driver
+ *
+ * Copyright (C) 2020 National Instruments Corporation
+ * Author: Michael Auchter <michael.auchter@ni.com>
+ */
+
+#include <linux/extcon-provider.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#define TUSB320_REG9				0x9
+#define TUSB320_REG9_ATTACHED_STATE_SHIFT	6
+#define TUSB320_REG9_ATTACHED_STATE_MASK	0x3
+#define TUSB320_REG9_CABLE_DIRECTION		BIT(5)
+#define TUSB320_REG9_INTERRUPT_STATUS		BIT(4)
+#define TUSB320_ATTACHED_STATE_NONE		0x0
+#define TUSB320_ATTACHED_STATE_DFP		0x1
+#define TUSB320_ATTACHED_STATE_UFP		0x2
+#define TUSB320_ATTACHED_STATE_ACC		0x3
+
+struct tusb320_priv {
+	struct device *dev;
+	struct regmap *regmap;
+	struct extcon_dev *edev;
+};
+
+static const char * const tusb_attached_states[] = {
+	[TUSB320_ATTACHED_STATE_NONE] = "not attached",
+	[TUSB320_ATTACHED_STATE_DFP]  = "downstream facing port",
+	[TUSB320_ATTACHED_STATE_UFP]  = "upstream facing port",
+	[TUSB320_ATTACHED_STATE_ACC]  = "accessory",
+};
+
+static const unsigned int tusb320_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_NONE,
+};
+
+static int tusb320_check_signature(struct tusb320_priv *priv)
+{
+	static const char sig[] = { '\0', 'T', 'U', 'S', 'B', '3', '2', '0' };
+	unsigned val;
+	int i, ret;
+
+	for (i = 0; i < sizeof(sig); i++) {
+		ret = regmap_read(priv->regmap, sizeof(sig) - 1 - i, &val);
+		if (ret < 0)
+			return ret;
+		if (val != sig[i]) {
+			dev_err(priv->dev, "signature mismatch!\n");
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
+static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
+{
+	struct tusb320_priv *priv = dev_id;
+	int state, polarity;
+	unsigned reg;
+
+	if (regmap_read(priv->regmap, TUSB320_REG9, &reg)) {
+		dev_err(priv->dev, "error during i2c read!\n");
+		return IRQ_NONE;
+	}
+
+	if (!(reg & TUSB320_REG9_INTERRUPT_STATUS))
+		return IRQ_NONE;
+
+	state = (reg >> TUSB320_REG9_ATTACHED_STATE_SHIFT) &
+		TUSB320_REG9_ATTACHED_STATE_MASK;
+	polarity = !!(reg & TUSB320_REG9_CABLE_DIRECTION);
+
+	dev_dbg(priv->dev, "attached state: %s, polarity: %d\n",
+		tusb_attached_states[state], polarity);
+
+	extcon_set_state(priv->edev, EXTCON_USB,
+			 state == TUSB320_ATTACHED_STATE_UFP);
+	extcon_set_state(priv->edev, EXTCON_USB_HOST,
+			 state == TUSB320_ATTACHED_STATE_DFP);
+	extcon_set_property(priv->edev, EXTCON_USB,
+			    EXTCON_PROP_USB_TYPEC_POLARITY,
+			    (union extcon_property_value)polarity);
+	extcon_set_property(priv->edev, EXTCON_USB_HOST,
+			    EXTCON_PROP_USB_TYPEC_POLARITY,
+			    (union extcon_property_value)polarity);
+	extcon_sync(priv->edev, EXTCON_USB);
+	extcon_sync(priv->edev, EXTCON_USB_HOST);
+
+	regmap_write(priv->regmap, TUSB320_REG9, reg);
+
+	return IRQ_HANDLED;
+}
+
+static const struct regmap_config tusb320_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int tusb320_extcon_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct tusb320_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->dev = &client->dev;
+
+	priv->regmap = devm_regmap_init_i2c(client, &tusb320_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	ret = tusb320_check_signature(priv);
+	if (ret)
+		return ret;
+
+	priv->edev = devm_extcon_dev_allocate(priv->dev, tusb320_extcon_cable);
+	if (IS_ERR(priv->edev)) {
+		dev_err(priv->dev, "failed to allocate extcon device\n");
+		return PTR_ERR(priv->edev);
+	}
+
+	ret = devm_extcon_dev_register(priv->dev, priv->edev);
+	if (ret < 0) {
+		dev_err(priv->dev, "failed to register extcon device\n");
+		return ret;
+	}
+
+	extcon_set_property_capability(priv->edev, EXTCON_USB,
+				       EXTCON_PROP_USB_TYPEC_POLARITY);
+	extcon_set_property_capability(priv->edev, EXTCON_USB_HOST,
+				       EXTCON_PROP_USB_TYPEC_POLARITY);
+
+	/* update initial state */
+	tusb320_irq_handler(client->irq, priv);
+
+	ret = devm_request_threaded_irq(priv->dev, client->irq, NULL,
+					tusb320_irq_handler,
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					client->name, priv);
+
+	return ret;
+}
+
+static const struct of_device_id tusb320_extcon_dt_match[] = {
+	{ .compatible = "ti,tusb320", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tusb320_extcon_dt_match);
+
+static struct i2c_driver tusb320_extcon_driver = {
+	.probe		= tusb320_extcon_probe,
+	.driver		= {
+		.name	= "extcon-tusb320",
+		.of_match_table = tusb320_extcon_dt_match,
+	},
+};
+
+static int __init tusb320_init(void)
+{
+	return i2c_add_driver(&tusb320_extcon_driver);
+}
+subsys_initcall(tusb320_init);
+
+static void __exit tusb320_exit(void)
+{
+	i2c_del_driver(&tusb320_extcon_driver);
+}
+module_exit(tusb320_exit);
+
+MODULE_AUTHOR("Michael Auchter <michael.auchter@ni.com>");
+MODULE_DESCRIPTION("TI TUSB320 extcon driver");
+MODULE_LICENSE("GPL v2");