diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 886526b5fcdd..c73221a819c8 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -82,7 +82,7 @@ config USB_MUSB_DA8XX tristate "DA8xx/OMAP-L1x" depends on ARCH_DAVINCI_DA8XX depends on NOP_USB_XCEIV - depends on BROKEN + select PHY_DA8XX_USB config USB_MUSB_TUSB6010 tristate "TUSB6010" diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 35d24496ea71..2358f636e48c 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -30,13 +30,11 @@ #include #include #include +#include #include #include #include -#include -#include - #include "musb_core.h" /* @@ -80,60 +78,14 @@ #define DA8XX_MENTOR_CORE_OFFSET 0x400 -#define CFGCHIP2 IO_ADDRESS(DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP2_REG) - struct da8xx_glue { struct device *dev; struct platform_device *musb; - struct platform_device *phy; + struct platform_device *usb_phy; struct clk *clk; + struct phy *phy; }; -/* - * REVISIT (PM): we should be able to keep the PHY in low power mode most - * of the time (24 MHz oscillator and PLL off, etc.) by setting POWER.D0 - * and, when in host mode, autosuspending idle root ports... PHY_PLLON - * (overriding SUSPENDM?) then likely needs to stay off. - */ - -static inline void phy_on(void) -{ - u32 cfgchip2 = __raw_readl(CFGCHIP2); - - /* - * Start the on-chip PHY and its PLL. - */ - cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN); - cfgchip2 |= CFGCHIP2_PHY_PLLON; - __raw_writel(cfgchip2, CFGCHIP2); - - pr_info("Waiting for USB PHY clock good...\n"); - while (!(__raw_readl(CFGCHIP2) & CFGCHIP2_PHYCLKGD)) - cpu_relax(); -} - -static inline void phy_off(void) -{ - u32 cfgchip2 = __raw_readl(CFGCHIP2); - - /* - * Ensure that USB 1.1 reference clock is not being sourced from - * USB 2.0 PHY. Otherwise do not power down the PHY. - */ - if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX) && - (cfgchip2 & CFGCHIP2_USB1SUSPENDM)) { - pr_warning("USB 1.1 clocked from USB 2.0 PHY -- " - "can't power it down\n"); - return; - } - - /* - * Power down the on-chip PHY. - */ - cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN; - __raw_writel(cfgchip2, CFGCHIP2); -} - /* * Because we don't set CTRL.UINT, it's "important" to: * - not read/write INTRUSB/INTRUSBE (except during @@ -385,29 +337,29 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci) static int da8xx_musb_set_mode(struct musb *musb, u8 musb_mode) { - u32 cfgchip2 = __raw_readl(CFGCHIP2); + struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent); + enum phy_mode phy_mode; - cfgchip2 &= ~CFGCHIP2_OTGMODE; switch (musb_mode) { case MUSB_HOST: /* Force VBUS valid, ID = 0 */ - cfgchip2 |= CFGCHIP2_FORCE_HOST; + phy_mode = PHY_MODE_USB_HOST; break; case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */ - cfgchip2 |= CFGCHIP2_FORCE_DEVICE; + phy_mode = PHY_MODE_USB_DEVICE; break; case MUSB_OTG: /* Don't override the VBUS/ID comparators */ - cfgchip2 |= CFGCHIP2_NO_OVERRIDE; + phy_mode = PHY_MODE_USB_OTG; break; default: - dev_dbg(musb->controller, "Trying to set unsupported mode %u\n", musb_mode); + return -EINVAL; } - __raw_writel(cfgchip2, CFGCHIP2); - return 0; + return phy_set_mode(glue->phy, phy_mode); } static int da8xx_musb_init(struct musb *musb) { + struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent); void __iomem *reg_base = musb->ctrl_base; u32 rev; int ret = -ENODEV; @@ -425,32 +377,56 @@ static int da8xx_musb_init(struct musb *musb) goto fail; } + ret = clk_prepare_enable(glue->clk); + if (ret) { + dev_err(glue->dev, "failed to enable clock\n"); + goto fail; + } + setup_timer(&otg_workaround, otg_timer, (unsigned long)musb); /* Reset the controller */ musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK); /* Start the on-chip PHY and its PLL. */ - phy_on(); + ret = phy_init(glue->phy); + if (ret) { + dev_err(glue->dev, "Failed to init phy.\n"); + goto err_phy_init; + } + + ret = phy_power_on(glue->phy); + if (ret) { + dev_err(glue->dev, "Failed to power on phy.\n"); + goto err_phy_power_on; + } msleep(5); /* NOTE: IRQs are in mixed mode, not bypass to pure MUSB */ - pr_debug("DA8xx OTG revision %08x, PHY %03x, control %02x\n", - rev, __raw_readl(CFGCHIP2), + pr_debug("DA8xx OTG revision %08x, control %02x\n", rev, musb_readb(reg_base, DA8XX_USB_CTRL_REG)); musb->isr = da8xx_musb_interrupt; return 0; + +err_phy_power_on: + phy_exit(glue->phy); +err_phy_init: + clk_disable_unprepare(glue->clk); fail: return ret; } static int da8xx_musb_exit(struct musb *musb) { + struct da8xx_glue *glue = dev_get_drvdata(musb->controller->parent); + del_timer_sync(&otg_workaround); - phy_off(); + phy_power_off(glue->phy); + phy_exit(glue->phy); + clk_disable_unprepare(glue->clk); usb_put_phy(musb->xceiv); @@ -502,10 +478,10 @@ static int da8xx_probe(struct platform_device *pdev) return PTR_ERR(clk); } - ret = clk_enable(clk); - if (ret) { - dev_err(&pdev->dev, "failed to enable clock\n"); - goto err4; + glue->phy = devm_phy_get(&pdev->dev, "usb-phy"); + if (IS_ERR(glue->phy)) { + dev_err(&pdev->dev, "failed to get phy\n"); + return PTR_ERR(glue->phy); } glue->dev = &pdev->dev; @@ -513,10 +489,10 @@ static int da8xx_probe(struct platform_device *pdev) pdata->platform_ops = &da8xx_ops; - glue->phy = usb_phy_generic_register(); - if (IS_ERR(glue->phy)) { - ret = PTR_ERR(glue->phy); - goto err5; + glue->usb_phy = usb_phy_generic_register(); + if (IS_ERR(glue->usb_phy)) { + dev_err(&pdev->dev, "failed to register usb_phy\n"); + return PTR_ERR(glue->usb_phy); } platform_set_drvdata(pdev, glue); @@ -542,22 +518,12 @@ static int da8xx_probe(struct platform_device *pdev) glue->musb = musb = platform_device_register_full(&pinfo); if (IS_ERR(musb)) { - ret = PTR_ERR(musb); dev_err(&pdev->dev, "failed to register musb device: %d\n", ret); - goto err6; + usb_phy_generic_unregister(glue->usb_phy); + return PTR_ERR(musb); } return 0; - -err6: - usb_phy_generic_unregister(glue->phy); - -err5: - clk_disable(clk); - -err4: - - return ret; } static int da8xx_remove(struct platform_device *pdev) @@ -565,8 +531,7 @@ static int da8xx_remove(struct platform_device *pdev) struct da8xx_glue *glue = platform_get_drvdata(pdev); platform_device_unregister(glue->musb); - usb_phy_generic_unregister(glue->phy); - clk_disable(glue->clk); + usb_phy_generic_unregister(glue->usb_phy); return 0; }