mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-29 13:53:33 +00:00
Code Issues Releases Wiki Activity

pinctrl: qcom: Add intr_target_width field to support increased number of interrupt targets

Browse source 
SA8775 and newer target have added support for an increased number of
interrupt targets. To implement this change, the intr_target field, which
is used to configure the interrupt target in the interrupt configuration
register is increased from 3 bits to 4 bits.

In accordance to these updates, a new intr_target_width member is
introduced in msm_pingroup structure. This member stores the value of
width of intr_target field in the interrupt configuration register. This
value is used to dynamically calculate and generate mask for setting the
intr_target field. By default, this mask is set to 3 bit wide, to ensure
backward compatibility with the older targets.

Fixes: 4b6b185599 ("pinctrl: qcom: add the tlmm driver sa8775p platforms")
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Ninad Naik <quic_ninanaik@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230809100634.3961-1-quic_ninanaik@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Ninad Naik 2023-08-09 15:36:34 +05:30 committed by Linus Walleij
parent f00295e890
commit 9757300d27
3 changed files with 9 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

9
drivers/pinctrl/qcom/pinctrl-msm.c
View file

@ -1038,6 +1038,7 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type)
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
const struct msm_pingroup *g;
u32 intr_target_mask = GENMASK(2, 0);
unsigned long flags;
bool was_enabled;
u32 val;
@ -1074,13 +1075,15 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type)
* With intr_target_use_scm interrupts are routed to
* application cpu using scm calls.
*/
if (g->intr_target_width)
intr_target_mask = GENMASK(g->intr_target_width - 1, 0);
if (pctrl->intr_target_use_scm) {
u32 addr = pctrl->phys_base[0] + g->intr_target_reg;
int ret;
qcom_scm_io_readl(addr, &val);
val &= ~(7 << g->intr_target_bit);
val &= ~(intr_target_mask << g->intr_target_bit);
val |= g->intr_target_kpss_val << g->intr_target_bit;
ret = qcom_scm_io_writel(addr, val);
@ -1090,7 +1093,7 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type)
d->hwirq);
} else {
val = msm_readl_intr_target(pctrl, g);
val &= ~(7 << g->intr_target_bit);
val &= ~(intr_target_mask << g->intr_target_bit);
val |= g->intr_target_kpss_val << g->intr_target_bit;
msm_writel_intr_target(val, pctrl, g);
}

2
drivers/pinctrl/qcom/pinctrl-msm.h
View file

@ -59,6 +59,7 @@ struct pinctrl_pin_desc;
* @intr_status_bit: Offset in @intr_status_reg for reading and acking the interrupt
* status.
* @intr_target_bit: Offset in @intr_target_reg for configuring the interrupt routing.
* @intr_target_width: Number of bits used for specifying interrupt routing target.
* @intr_target_kpss_val: Value in @intr_target_bit for specifying that the interrupt from
* this gpio should get routed to the KPSS processor.
* @intr_raw_status_bit: Offset in @intr_cfg_reg for the raw status bit.
@ -100,6 +101,7 @@ struct msm_pingroup {
unsigned intr_ack_high:1;
unsigned intr_target_bit:5;
unsigned intr_target_width:5;
unsigned intr_target_kpss_val:5;
unsigned intr_raw_status_bit:5;
unsigned intr_polarity_bit:5;

1
drivers/pinctrl/qcom/pinctrl-sa8775p.c
View file

@ -46,6 +46,7 @@
.intr_enable_bit = 0, \
.intr_status_bit = 0, \
.intr_target_bit = 5, \
.intr_target_width = 4, \
.intr_target_kpss_val = 3, \
.intr_raw_status_bit = 4, \
.intr_polarity_bit = 1, \