mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-28 21:33:52 +00:00
Code Issues Releases Wiki Activity

ARM: device tree updates for 5.11

Browse source 
Across all platforms, there is a continued move towards DT schema for
 validating the dts files. As a result there are bug fixes for mistakes
 that are found using these schema, in addition to warnings from the
 dtc compiler.
 
 As usual, many changes are for adding support for additional on-chip
 and on-board components in the machines we already support.
 
 The newly supported SoCs for this release are:
 
  - MStar Infinity2M, a low-end IP camera chip based on a dual-core
    Cortex-A7, otherwise similar to the Infinity chip we already support.
    This is also known as the SigmaStar SSD202D, and we add support for
    the Honestar ssd201htv2 development kit.
 
  - Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
    (BMC), in the same family as the NPCM750. This gets used in the Ampere
    Altra based "Fii Kudo" server and the Quanta GSJ, both of which are
    added as well.
 
  - Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
    Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
    GT-AC5300 high-end WiFi router based on this chip.
 
  - Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
    meant for faster Chromebooks and tablets. It gets added along with
    its reference design.
 
  - Mediatek MT6779 (Helio P90) is a high-end phone chip from last year's
    generation, also added along with its reference board.  This one is
    still based on Cortex-A75/A55.
 
  - Mediatek MT8167 is a version of the already supported MT8516 chip,
    both based on Cortex-A35. It gets added along with the "Pumpkin"
    single board computer, but is likely to also make its way into low-end
    tablets in the future.
 
 For the already supported chips, there are a number of new boards.
 Interestingly there are more 32-bit machines added this time than
 64-bit. Here is a brief list of the new boards:
 
  - Three new Mikrotik router variants based on Marvell Prestera
    98DX3236, a close relative of the more common Armada XP
 
  - A reference board for the Marvell Armada 382
 
  - Three new servers using ASpeed baseboard management controllers,
    the actual machines being from Bytedance, Facebook and IBM,
    and one machine using the Nuvoton NPCM750 BMC.
 
  - The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
 
  - The usual set of 32-bit i.MX industrial/embedded hardware:
    * Protonic WD3 (tractor e-cockpit)
    * Kamstrup OMNIA Flex Concentrator (smart grid platform)
    * Van der Laan LANMCU (food storage)
    * Altesco I6P (vehicle inspection stations)
    * PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
 
  - DH electronics STM32MP157C DHCOM, a PicoITX carrier board
    for the aleady supported DHCOM module
 
  - Three new Allwinner SoC based single-board computers:
    * NanoPi R1 (H3 based)
    * FriendlyArm ZeroPi (H3 based)
    * Elimo Initium SBC (S3 based)
 
  - Ouya Game Console based on Nvidia Tegra 3
 
  - Version 5 of the already supported Zynq Z-Turn MYIR Board
 
  - LX2162AQDS, a reference platform for NXP Layerscape
    LX2162A, which is a repackaged 16-core LX2160A
 
  - A series of Kontron i.MX8M Mini baseboard/SoM versions
 
  - Espressobin Ultra, a new variant of the popular Armada 3700 based board,
 
  - IEI Puzzle-M801, a rackmount network appliance based on
    Marvell Armada 8040
 
  - Microsoft Lumia 950 XL, a phone
 
  - HDK855 and HDK865 Hardware development kits for Qualcomm
    sm8250 and sm8150, respectively
 
  - Three new board variants of the "Trogdor" Chromebook
    (sc7180)
 
  - New board variants of the Renesas based "Kingfisher" and
    "HiHope" reference boards
 
  - Kobol Helios64, an open source NAS appliance based on Rockchips
    RK3399
 
  - Engicam PX30.Core, a SoM based on Rockchip PX30, along with
    a few carrier boards.
 
 There is one conflict in mt6577_auxadc.txt, which got replaced in
 another tree and modified here, the modification is already part of
 the new file.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/ak/EACgkQmmx57+YA
 GNmQwRAAtw5Z0qYI3vewX2CPUaHUWEeN50gRa63tR+AALqR5e+M+IbAttgOwlLDB
 jmsiLRYXgYeS+nTCqxWX3O/KtDH+Ua3GfPoXch5Wt4k7jGV8XtHsWqltl9qxGmO7
 pQSoafJa55S7iXX7j4PMWc2el07zjYAejyzVHz7sD+9ARPaG0cL8IuAWLqAirTSt
 b9FhK2g7e/uUx2Jp5Cx/Ck4kZe27bTlpbhhcJMdypsw6ouue0wfq9gs68dQ6dAq5
 /KyX8PNsjX/WCcgm6YhgOwqmEk73pc17dym2SVxi+jL/HFIyQyViOpFuPc20cCWv
 9QirMsBw2Rw0yLHsIuHeeRl1KEn47vdfgP5A6e+BggpPjmtF0/S0kHR8yXWFyHfy
 OUdS8W5OM3rlEUgGESaszh7P2kril8tMdw0212rAyTpyLPVRoKR7NtOo79WBclKq
 L/2RPJNIQSotQuezhMpjH5zKgx6yOfATBZAEX0MiSU+jAEw/0Od5QCdhwu70bIAF
 jHfjtqMGS50P/i1Ht0DpwOF9DvClAlKHvUKs3a7hK81MP2sOAaElpAP3iHwVPzsI
 JU6Vn3AxnIfAsHdGh/FYwq7nxL9aVLCULUOeuLhwTbdAedXLkfFQDMIe1i8zgDtH
 MpIrE4Un7kmkOxRG96v8f0IYu54OdQdudonravimpYD3uqRfxUQ=
 =R47r
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM device tree updates from Arnd Bergmann:
 "Across all platforms, there is a continued move towards DT schema for
  validating the dts files. As a result there are bug fixes for mistakes
  that are found using these schema, in addition to warnings from the
  dtc compiler.

  As usual, many changes are for adding support for additional on-chip
  and on-board components in the machines we already support.

  The newly supported SoCs for this release are:

   - MStar Infinity2M, a low-end IP camera chip based on a dual-core
     Cortex-A7, otherwise similar to the Infinity chip we already
     support. This is also known as the SigmaStar SSD202D, and we add
     support for the Honestar ssd201htv2 development kit.

   - Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
     (BMC), in the same family as the NPCM750. This gets used in the
     Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
     which are added as well.

   - Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
     Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
     GT-AC5300 high-end WiFi router based on this chip.

   - Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
     meant for faster Chromebooks and tablets. It gets added along with
     its reference design.

   - Mediatek MT6779 (Helio P90) is a high-end phone chip from last
     year's generation, also added along with its reference board. This
     one is still based on Cortex-A75/A55.

   - Mediatek MT8167 is a version of the already supported MT8516 chip,
     both based on Cortex-A35. It gets added along with the "Pumpkin"
     single board computer, but is likely to also make its way into
     low-end tablets in the future.

  For the already supported chips, there are a number of new boards.
  Interestingly there are more 32-bit machines added this time than
  64-bit. Here is a brief list of the new boards:

   - Three new Mikrotik router variants based on Marvell Prestera
     98DX3236, a close relative of the more common Armada XP

   - A reference board for the Marvell Armada 382

   - Three new servers using ASpeed baseboard management controllers,
     the actual machines being from Bytedance, Facebook and IBM, and one
     machine using the Nuvoton NPCM750 BMC.

   - The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.

   - The usual set of 32-bit i.MX industrial/embedded hardware:
       * Protonic WD3 (tractor e-cockpit)
       * Kamstrup OMNIA Flex Concentrator (smart grid platform)
       * Van der Laan LANMCU (food storage)
       * Altesco I6P (vehicle inspection stations)
       * PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard

   - DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
     aleady supported DHCOM module

   - Three new Allwinner SoC based single-board computers:
       * NanoPi R1 (H3 based)
       * FriendlyArm ZeroPi (H3 based)
       * Elimo Initium SBC (S3 based)

   - Ouya Game Console based on Nvidia Tegra 3

   - Version 5 of the already supported Zynq Z-Turn MYIR Board

   - LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
     is a repackaged 16-core LX2160A

   - A series of Kontron i.MX8M Mini baseboard/SoM versions

   - Espressobin Ultra, a new variant of the popular Armada 3700 based
     board,

   - IEI Puzzle-M801, a rackmount network appliance based on Marvell
     Armada 8040

   - Microsoft Lumia 950 XL, a phone

   - HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
     sm8150, respectively

   - Three new board variants of the "Trogdor" Chromebook (sc7180)

   - New board variants of the Renesas based "Kingfisher" and "HiHope"
     reference boards

   - Kobol Helios64, an open source NAS appliance based on Rockchips
     RK3399

   - Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
     carrier boards"

* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
  arm64: dts: sparx5: Add SGPIO devices
  arm64: dts: sparx5: Add reset support
  dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
  ARM: mstar: SMP support
  ARM: mstar: Wire up smpctrl for SSD201/SSD202D
  ARM: mstar: Add smp ctrl registers to infinity2m dtsi
  ARM: mstar: Add dts for Honestar ssd201htv2
  ARM: mstar: Add chip level dtsi for SSD202D
  ARM: mstar: Add common dtsi for SSD201/SSD202D
  ARM: mstar: Add infinity2m support
  dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
  dt-bindings: vendor-prefixes: Add honestar vendor prefix
  dt-bindings: mstar: Add binding details for mstar,smpctrl
  ARM: mstar: Fill in GPIO controller properties for infinity
  ARM: mstar: Add gpio controller to MStar base dtsi
  ARM: zynq: Fix incorrect reference to XM013 instead of XM011
  ARM: zynq: Convert at25 binding to new description on zc770-xm013
  ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
  ARM: zynq: Fix leds subnode name for zc702/zybo-z7
  ARM: zynq: Rename bus to be align with simple-bus yaml
  ...
This commit is contained in:
Linus Torvalds 2020-12-16 16:27:35 -08:00
commit 9805529ec5
589 changed files with 36057 additions and 2949 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

38
Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml Normal file
View file

@ -0,0 +1,38 @@
# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4908.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Broadcom BCM4908 device tree bindings
description:
Broadcom BCM4906 / BCM4908 / BCM49408 Wi-Fi/network SoCs with Brahma CPUs.
maintainers:
- Rafał Miłecki <rafal@milecki.pl>
properties:
$nodename:
const: '/'
compatible:
oneOf:
- description: BCM4906 based boards
items:
- const: brcm,bcm4906
- const: brcm,bcm4908
- description: BCM4908 based boards
items:
- enum:
- asus,gt-ac5300
- const: brcm,bcm4908
- description: BCM49408 based boards
items:
- const: brcm,bcm49408
- const: brcm,bcm4908
additionalProperties: true
...

12
Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
View file

@ -89,7 +89,10 @@ Required properties:
"fsl,imx8qm-clock"
"fsl,imx8qxp-clock"
followed by "fsl,scu-clk"
- #clock-cells: Should be 1. Contains the Clock ID value.
- #clock-cells: Should be either
2: Contains the Resource and Clock ID value.
or
1: Contains the Clock ID value. (DEPRECATED)
- clocks: List of clock specifiers, must contain an entry for
each required entry in clock-names
- clock-names: Should include entries "xtal_32KHz", "xtal_24MHz"
@ -208,7 +211,7 @@ firmware {
clk: clk {
compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
#clock-cells = <1>;
#clock-cells = <2>;
};
iomuxc {
@ -263,8 +266,7 @@ serial@5a060000 {
...
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
clocks = <&clk IMX8QXP_UART0_CLK>,
<&clk IMX8QXP_UART0_IPG_CLK>;
clock-names = "per", "ipg";
clocks = <&uart0_clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
clock-names = "ipg";
power-domains = <&pd IMX_SC_R_UART_0>;
};

360
Documentation/devicetree/bindings/arm/fsl.yaml
View file

@ -33,16 +33,57 @@ properties:
items:
- enum:
- fsl,imx25-pdk
- karo,imx25-tx25
- const: fsl,imx25
- description: i.MX27 Product Development Kit
- description: i.MX25 Eukrea CPUIMX25 Boards
items:
- enum:
- eukrea,mbimxsd25-baseboard # Eukrea MBIMXSD25
- const: eukrea,cpuimx25
- const: fsl,imx25
- description: i.MX25 Eukrea MBIMXSD25 Boards
items:
- enum:
- eukrea,mbimxsd25-baseboard-cmo-qvga
- eukrea,mbimxsd25-baseboard-dvi-svga
- eukrea,mbimxsd25-baseboard-dvi-vga
- const: eukrea,mbimxsd25-baseboard
- const: eukrea,cpuimx25
- const: fsl,imx25
- description: i.MX27 based Boards
items:
- enum:
- armadeus,imx27-apf27 # APF27 SoM
- armadeus,imx27-apf27dev # APF27 SoM on APF27Dev board
- fsl,imx27-pdk
- const: fsl,imx27
- description: i.MX27 APF27 SoM Board
items:
- const: armadeus,imx27-apf27dev
- const: armadeus,imx27-apf27
- const: fsl,imx27
- description: i.MX27 Eukrea CPUIMX27 SoM Board
items:
- const: eukrea,mbimxsd27-baseboard
- const: eukrea,cpuimx27
- const: fsl,imx27
- description: i.MX27 Phytec pca100 Board
items:
- const: phytec,imx27-pca100-rdk
- const: phytec,imx27-pca100
- const: fsl,imx27
- description: i.MX27 Phytec pcm970 Board
items:
- const: phytec,imx27-pcm970
- const: phytec,imx27-pcm038
- const: fsl,imx27
- description: i.MX28 based Boards
items:
- enum:
@ -88,13 +129,33 @@ properties:
- kobo,aura
- const: fsl,imx50
- description: i.MX51 Babbage Board
- description: i.MX51 based Boards
items:
- enum:
- armadeus,imx51-apf51 # APF51 SoM
- armadeus,imx51-apf51dev # APF51 SoM on APF51Dev board
- armadeus,imx51-apf51 # Armadeus Systems APF51 module
- fsl,imx51-babbage
- technologic,imx51-ts4800
- zii,imx51-scu3-esb
- zii,imx51-scu2-mezz
- zii,imx51-rdu1
- const: fsl,imx51
- description: i.MX51 based Armadeus Systems APF51Dev Board
items:
- const: armadeus,imx51-apf51dev
- const: armadeus,imx51-apf51
- const: fsl,imx51
- description: i.MX51 based Digi ConnectCore CC(W)-MX51 JSK Board
items:
- const: digi,connectcore-ccxmx51-jsk
- const: digi,connectcore-ccxmx51-som
- const: fsl,imx51
- description: i.MX51 based Eukrea CPUIMX51 Board
items:
- const: eukrea,mbimxsd51
- const: eukrea,cpuimx51
- const: fsl,imx51
- description: i.MX53 based Boards
@ -104,36 +165,111 @@ properties:
- fsl,imx53-ard
- fsl,imx53-evk
- fsl,imx53-qsb
- fsl,imx53-qsrb # Freescale i.MX53 Quick Start-R Board
- fsl,imx53-smd
- ge,imx53-cpuvo # General Electric CS ONE
- inversepath,imx53-usbarmory # Inverse Path USB armory
- karo,tx53 # Ka-Ro electronics TX53 module
- kiebackpeter,imx53-ddc # K+P imx53 DDC
- kiebackpeter,imx53-hsc # K+P imx53 HSC
- menlo,m53menlo
- voipac,imx53-dmm-668 # Voipac i.MX53 X53-DMM-668
- const: fsl,imx53
- description: i.MX53 based Aries/DENX M53EVK Board
items:
- const: aries,imx53-m53evk
- const: denx,imx53-m53evk
- const: fsl,imx53
- description: i.MX53 based TQ MBa53 Board
items:
- const: tq,mba53
- const: tq,tqma53
- const: fsl,imx53
- description: i.MX6Q based Boards
items:
- enum:
- armadeus,imx6q-apf6 # APF6 (Quad/Dual) SoM
- armadeus,imx6q-apf6dev # APF6 (Quad/Dual) SoM on APF6Dev board
- auvidea,h100 # Auvidea H100
- boundary,imx6q-nitrogen6_max
- boundary,imx6q-nitrogen6_som2
- boundary,imx6q-nitrogen6x
- compulab,cm-fx6 # CompuLab CM-FX6
- dmo,imx6q-edmqmx6 # Data Modul eDM-QMX6 Board
- embest,imx6q-marsboard # Embest MarS Board i.MX6Dual
- emtrion,emcon-mx6 # emCON-MX6D or emCON-MX6Q SoM
- emtrion,emcon-mx6-avari # emCON-MX6D or emCON-MX6Q SoM on Avari Base
- engicam,imx6-icore # Engicam i.CoreM6 Starter Kit
- engicam,imx6-icore-rqs # Engicam i.CoreM6 RQS Starter Kit
- fsl,imx6q-arm2
- fsl,imx6q-sabreauto
- fsl,imx6q-sabrelite
- fsl,imx6q-sabresd
- karo,imx6q-tx6q # Ka-Ro electronics TX6Q Modules
- kiebackpeter,imx6q-tpc # K+P i.MX6 Quad TPC Board
- kontron,imx6q-samx6i # Kontron i.MX6 Dual/Quad SMARC Module
- kosagi,imx6q-novena # Kosagi Novena Dual/Quad
- logicpd,imx6q-logicpd
- lwn,display5 # Liebherr Display5 i.MX6 Quad Board
- lwn,mccmon6 # Liebherr Monitor6 i.MX6 Quad Board
- nutsboard,imx6q-pistachio # NutsBoard i.MX6 Quad Pistachio
- microsys,sbc6x # MicroSys sbc6x board
- poslab,imx6q-savageboard # Poslab SavageBoard Quad
- prt,prti6q # Protonic PRTI6Q board
- prt,prtwd2 # Protonic WD2 board
- rex,imx6q-rex-pro # Rex Pro i.MX6 Quad Board
- solidrun,cubox-i/q # SolidRun Cubox-i Dual/Quad
- solidrun,hummingboard/q
- solidrun,hummingboard2/q
- tbs,imx6q-tbs2910 # TBS2910 Matrix ARM mini PC
- technexion,imx6q-pico-dwarf # TechNexion i.MX6Q Pico-Dwarf
- technexion,imx6q-pico-hobbit # TechNexion i.MX6Q Pico-Hobbit
- technexion,imx6q-pico-nymph # TechNexion i.MX6Q Pico-Nymph
- technexion,imx6q-pico-pi # TechNexion i.MX6Q Pico-Pi
- technologic,imx6q-ts4900
- technologic,imx6q-ts7970
- toradex,apalis_imx6q # Apalis iMX6 Module
- toradex,apalis_imx6q-eval # Apalis iMX6 Module on Apalis Evaluation Board
- toradex,apalis_imx6q-ixora # Apalis iMX6 Module on Ixora
- toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6 Module on Ixora V1.1
- toradex,apalis_imx6q # Apalis iMX6 Module
- udoo,imx6q-udoo # Udoo i.MX6 Quad Board
- uniwest,imx6q-evi # Uniwest Evi
- variscite,dt6customboard
- wand,imx6q-wandboard # Wandboard i.MX6 Quad Board
- zealz,imx6q-gk802 # Zealz GK802
- zii,imx6q-zii-rdu2 # ZII RDU2 Board
- const: fsl,imx6q
- description: i.MX6Q Advantech DMS-BA16 Boards
items:
- enum:
- advantech,imx6q-dms-ba16 # Advantech DMS-BA16
- ge,imx6q-b450v3 # General Electric B450v3
- ge,imx6q-b650v3 # General Electric B650v3
- ge,imx6q-b850v3 # General Electric B850v3
- const: advantech,imx6q-ba16
- const: fsl,imx6q
- description: i.MX6Q Armadeus APF6 Boards
items:
- const: armadeus,imx6q-apf6dev
- const: armadeus,imx6q-apf6
- const: fsl,imx6q
- description: i.MX6Q CompuLab Utilite Pro Board
items:
- const: compulab,utilite-pro
- const: compulab,cm-fx6
- const: fsl,imx6q
- description: i.MX6Q DFI FS700-M60-6QD Board
items:
- const: dfi,fs700-m60-6qd
- const: dfi,fs700e-m60
- const: fsl,imx6q
- description: i.MX6Q DHCOM Premium Developer Kit Board
items:
- const: dh,imx6q-dhcom-pdk2
- const: dh,imx6q-dhcom-som
- const: fsl,imx6q
- description: i.MX6Q Gateworks Ventana Boards
@ -172,11 +308,32 @@ properties:
- const: phytec,imx6q-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
- const: fsl,imx6q
- description: i.MX6Q Boards with Toradex Apalis iMX6Q/D Module
items:
- enum:
- toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board
- toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board
- const: toradex,apalis_imx6q
- const: fsl,imx6q
- description: i.MX6Q Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1
items:
- const: toradex,apalis_imx6q-ixora-v1.1
- const: toradex,apalis_imx6q-ixora
- const: toradex,apalis_imx6q
- const: fsl,imx6q
- description: i.MX6QP based Boards
items:
- enum:
- boundary,imx6qp-nitrogen6_max
- boundary,imx6qp-nitrogen6_som2
- fsl,imx6qp-sabreauto # i.MX6 Quad Plus SABRE Automotive Board
- fsl,imx6qp-sabresd # i.MX6 Quad Plus SABRE Smart Device Board
- karo,imx6qp-tx6qp # Ka-Ro electronics TX6QP-8037 Module
- prt,prtwd3 # Protonic WD3 board
- wand,imx6qp-wandboard # Wandboard i.MX6 QuadPlus Board
- zii,imx6qp-zii-rdu2 # ZII RDU2+ Board
- const: fsl,imx6qp
- description: i.MX6QP PHYTEC phyBOARD-Mira
@ -189,32 +346,59 @@ properties:
- description: i.MX6DL based Boards
items:
- enum:
- armadeus,imx6dl-apf6 # APF6 (Solo) SoM
- armadeus,imx6dl-apf6dev # APF6 (Solo) SoM on APF6Dev board
- abb,aristainetos-imx6dl-4 # aristainetos i.MX6 Dual Lite Board 4
- abb,aristainetos-imx6dl-7 # aristainetos i.MX6 Dual Lite Board 7
- abb,aristainetos2-imx6dl-4 # aristainetos2 i.MX6 Dual Lite Board 4
- abb,aristainetos2-imx6dl-7 # aristainetos2 i.MX6 Dual Lite Board 7
- alt,alti6p # Altesco I6P Board
- boundary,imx6dl-nit6xlite # Boundary Devices Nitrogen6 Lite
- boundary,imx6dl-nitrogen6x # Boundary Devices Nitrogen6x
- bticino,imx6dl-mamoj # BTicino i.MX6DL Mamoj
- eckelmann,imx6dl-ci4x10
- emtrion,emcon-mx6 # emCON-MX6S or emCON-MX6DL SoM
- emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base
- engicam,imx6-icore # Engicam i.CoreM6 Starter Kit
- engicam,imx6-icore-rqs # Engicam i.CoreM6 RQS Starter Kit
- fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board
- fsl,imx6dl-sabrelite # i.MX6 DualLite SABRE Lite Board
- fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board
- karo,imx6dl-tx6dl # Ka-Ro electronics TX6U Modules
- kontron,imx6dl-samx6i # Kontron i.MX6 Solo SMARC Module
- poslab,imx6dl-savageboard # Poslab SavageBoard Dual
- prt,prtrvt # Protonic RVT board
- prt,prtvt7 # Protonic VT7 board
- rex,imx6dl-rex-basic # Rex Basic i.MX6 Dual Lite Board
- riot,imx6s-riotboard # RIoTboard i.MX6S
- solidrun,cubox-i/dl # SolidRun Cubox-i Solo/DualLite
- solidrun,hummingboard/dl
- solidrun,hummingboard2/dl # SolidRun HummingBoard2 Solo/DualLite
- technexion,imx6dl-pico-dwarf # TechNexion i.MX6DL Pico-Dwarf
- technexion,imx6dl-pico-hobbit # TechNexion i.MX6DL Pico-Hobbit
- technexion,imx6dl-pico-nymph # TechNexion i.MX6DL Pico-Nymph
- technexion,imx6dl-pico-pi # TechNexion i.MX6DL Pico-Pi
- technologic,imx6dl-ts4900
- technologic,imx6dl-ts7970
- toradex,colibri_imx6dl # Colibri iMX6 Module
- toradex,colibri_imx6dl-v1_1 # Colibri iMX6 Module V1.1
- toradex,colibri_imx6dl-eval-v3 # Colibri iMX6 Module on Colibri Evaluation Board V3
- toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6 Module V1.1 on Colibri Evaluation Board V3
- udoo,imx6dl-udoo # Udoo i.MX6 Dual-lite Board
- vdl,lanmcu # Van der Laan LANMCU board
- wand,imx6dl-wandboard # Wandboard i.MX6 Dual Lite Board
- ysoft,imx6dl-yapp4-draco # i.MX6 DualLite Y Soft IOTA Draco board
- ysoft,imx6dl-yapp4-hydra # i.MX6 DualLite Y Soft IOTA Hydra board
- ysoft,imx6dl-yapp4-orion # i.MX6 DualLite Y Soft IOTA Orion board
- ysoft,imx6dl-yapp4-ursa # i.MX6 Solo Y Soft IOTA Ursa board
- const: fsl,imx6dl
- description: i.MX6DL based Armadeus AFP6 Board
items:
- const: armadeus,imx6dl-apf6dev
- const: armadeus,imx6dl-apf6 # APF6 (Solo) SoM
- const: fsl,imx6dl
- description: i.MX6DL based DFI FS700-M60-6DL Board
items:
- const: dfi,fs700-m60-6dl
- const: dfi,fs700e-m60
- const: fsl,imx6dl
- description: i.MX6DL Gateworks Ventana Boards
items:
- enum:
@ -250,12 +434,29 @@ properties:
- const: phytec,imx6dl-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
- const: fsl,imx6dl
- description: i.MX6DL Toradex Colibri iMX6 Module on Colibri
Evaluation Board V3
items:
- const: toradex,colibri_imx6dl-eval-v3
- const: toradex,colibri_imx6dl # Colibri iMX6 Module
- const: fsl,imx6dl
- description: i.MX6DL Toradex Colibri iMX6 Module V1.1 on Colibri
Evaluation Board V3
items:
- const: toradex,colibri_imx6dl-v1_1-eval-v3
- const: toradex,colibri_imx6dl-v1_1 # Colibri iMX6 Module V1.1
- const: toradex,colibri_imx6dl-eval-v3
- const: toradex,colibri_imx6dl # Colibri iMX6 Module
- const: fsl,imx6dl
- description: i.MX6SL based Boards
items:
- enum:
- fsl,imx6sl-evk # i.MX6 SoloLite EVK Board
- kobo,tolino-shine2hd
- kobo,tolino-shine3
- revotics,imx6sl-warp # Revotics WaRP Board
- const: fsl,imx6sl
- description: i.MX6SLL based Boards
@ -268,17 +469,23 @@ properties:
- description: i.MX6SX based Boards
items:
- enum:
- boundary,imx6sx-nitrogen6sx
- fsl,imx6sx-sabreauto # i.MX6 SoloX Sabre Auto Board
- fsl,imx6sx-sdb # i.MX6 SoloX SDB Board
- fsl,imx6sx-sdb-reva # i.MX6 SoloX SDB Rev-A Board
- samtec,imx6sx-vining-2000 # Softing VIN|ING 2000 Board
- udoo,neobasic # UDOO Neo Basic Board
- udoo,neoextended # UDOO Neo Extended
- udoo,neofull # UDOO Neo Full
- const: fsl,imx6sx
- description: i.MX6UL based Boards
items:
- enum:
- armadeus,imx6ul-opos6ul # OPOS6UL (i.MX6UL) SoM
- armadeus,imx6ul-opos6uldev # OPOS6UL (i.MX6UL) SoM on OPOS6ULDev board
- engicam,imx6ul-geam # Engicam GEAM6UL Starter Kit
- engicam,imx6ul-isiot # Engicam Is.IoT MX6UL eMMC/NAND Starter kit
- fsl,imx6ul-14x14-evk # i.MX6 UltraLite 14x14 EVK Board
- karo,imx6ul-tx6ul # Ka-Ro electronics TXUL-0010 Module
- kontron,imx6ul-n6310-som # Kontron N6310 SOM
- kontron,imx6ul-n6311-som # Kontron N6311 SOM
- technexion,imx6ul-pico-dwarf # TechNexion i.MX6UL Pico-Dwarf
@ -286,6 +493,26 @@ properties:
- technexion,imx6ul-pico-pi # TechNexion i.MX6UL Pico-Pi
- const: fsl,imx6ul
- description: i.MX6UL Armadeus Systems OPOS6UL SoM Board
items:
- const: armadeus,imx6ul-opos6uldev # OPOS6UL (i.MX6UL) SoM on OPOS6ULDev board
- const: armadeus,imx6ul-opos6ul # OPOS6UL (i.MX6UL) SoM
- const: fsl,imx6ul
- description: i.MX6UL Digi International ConnectCore 6UL Boards
items:
- enum:
- digi,ccimx6ulsbcexpress # Digi International ConnectCore 6UL SBC Express
- digi,ccimx6ulsbcpro # Digi International ConnectCore 6UL SBC Pro
- const: digi,ccimx6ulsom
- const: fsl,imx6ul
- description: i.MX6UL Grinn liteBoard
items:
- const: grinn,imx6ul-liteboard
- const: grinn,imx6ul-litesom
- const: fsl,imx6ul
- description: i.MX6UL PHYTEC phyBOARD-Segin
items:
- enum:
@ -317,8 +544,6 @@ properties:
- description: i.MX6ULL based Boards
items:
- enum:
- armadeus,imx6ull-opos6ul # OPOS6UL (i.MX6ULL) SoM
- armadeus,imx6ull-opos6uldev # OPOS6UL (i.MX6ULL) SoM on OPOS6ULDev board
- fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board
- kontron,imx6ull-n6411-som # Kontron N6411 SOM
- myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
@ -326,6 +551,12 @@ properties:
- toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
- const: fsl,imx6ull
- description: i.MX6ULL Armadeus Systems OPOS6ULDev Board
items:
- const: armadeus,imx6ull-opos6uldev # OPOS6UL (i.MX6ULL) SoM on OPOS6ULDev board
- const: armadeus,imx6ull-opos6ul # OPOS6UL (i.MX6ULL) SoM
- const: fsl,imx6ull
- description: i.MX6ULL PHYTEC phyBOARD-Segin
items:
- enum:
@ -351,17 +582,32 @@ properties:
- description: i.MX7S based Boards
items:
- enum:
- toradex,colibri-imx7s # Colibri iMX7 Solo Module
- toradex,colibri-imx7s-aster # Colibri iMX7 Solo Module on Aster Carrier Board
- toradex,colibri-imx7s-eval-v3 # Colibri iMX7 Solo Module on Colibri Evaluation Board V3
- tq,imx7s-mba7 # i.MX7S TQ MBa7 with TQMa7S SoM
- element14,imx7s-warp # Element14 Warp i.MX7 Board
- const: fsl,imx7s
- description: i.MX7S Boards with Toradex Colibri iMX7S Module
items:
- enum:
- toradex,colibri-imx7s-aster # Module on Aster Carrier Board
- toradex,colibri-imx7s-eval-v3 # Module on Colibri Evaluation Board V3
- const: toradex,colibri-imx7s
- const: fsl,imx7s
- description: TQ-Systems TQMa7S SoM on MBa7x board
items:
- const: tq,imx7s-mba7
- const: tq,imx7s-tqma7
- const: fsl,imx7s
- description: i.MX7D based Boards
items:
- enum:
- boundary,imx7d-nitrogen7
- compulab,cl-som-imx7 # CompuLab CL-SOM-iMX7
- fsl,imx7d-sdb # i.MX7 SabreSD Board
- fsl,imx7d-sdb-reva # i.MX7 SabreSD Rev-A Board
- kam,imx7d-flex-concentrator # Kamstrup OMNIA Flex Concentrator
- kam,imx7d-flex-concentrator-mfg # Kamstrup OMNIA Flex Concentrator in manufacturing mode
- novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board
- technexion,imx7d-pico-dwarf # TechNexion i.MX7D Pico-Dwarf
- technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit
@ -376,11 +622,16 @@ properties:
# Colibri Evaluation Board V3
- toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on
# Colibri Evaluation Board V3
- tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM
- zii,imx7d-rmu2 # ZII RMU2 Board
- zii,imx7d-rpu2 # ZII RPU2 Board
- const: fsl,imx7d
- description: TQ-Systems TQMa7D SoM on MBa7x board
items:
- const: tq,imx7d-mba7
- const: tq,imx7d-tqma7
- const: fsl,imx7d
- description:
Compulab SBC-iMX7 is a single board computer based on the
Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with
@ -392,6 +643,22 @@ properties:
- const: compulab,cl-som-imx7
- const: fsl,imx7d
- description: i.MX7D Boards with Toradex Colibri i.MX7D Module
items:
- enum:
- toradex,colibri-imx7d-aster # Module on Aster Carrier Board
- toradex,colibri-imx7d-eval-v3 # Module on Colibri Evaluation Board V3
- const: toradex,colibri-imx7d
- const: fsl,imx7d
- description: i.MX7D Boards with Toradex Colibri i.MX7D eMMC Module
items:
- enum:
- toradex,colibri-imx7d-emmc-aster # Module on Aster Carrier Board
- toradex,colibri-imx7d-emmc-eval-v3 # Module on Colibri Evaluation Board V3
- const: toradex,colibri-imx7d-emmc
- const: fsl,imx7d
- description: i.MX7ULP based Boards
items:
- enum:
@ -405,9 +672,16 @@ properties:
- beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit
- fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board
- fsl,imx8mm-evk # i.MX8MM EVK Board
- kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM
- variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module
- const: fsl,imx8mm
- description: Kontron BL i.MX8MM (N801X S) Board
items:
- const: kontron,imx8mm-n801x-s
- const: kontron,imx8mm-n801x-som
- const: fsl,imx8mm
- description: Variscite VAR-SOM-MX8MM based boards
items:
- const: variscite,var-som-mx8mm-symphony
@ -491,10 +765,26 @@ properties:
- fsl,vf600
- fsl,vf610
- fsl,vf610m4
- toradex,vf500-colibri_vf50 # Colibri VF50 Module
- toradex,vf500-colibri_vf50-on-eval # Colibri VF50 Module on Colibri Evaluation Board
- toradex,vf610-colibri_vf61 # Colibri VF61 Module
- toradex,vf610-colibri_vf61-on-eval # Colibri VF61 Module on Colibri Evaluation Board
- description: Toradex Colibri VF50 Module on Colibri Evaluation Board
items:
- const: toradex,vf500-colibri_vf50-on-eval
- const: toradex,vf500-colibri_vf50
- const: fsl,vf500
- description: VF610 based Boards
items:
- enum:
- lwn,bk4 # Liebherr BK4 controller
- phytec,vf610-cosmic # PHYTEC Cosmic/Cosmic+ Board
- fsl,vf610-twr # VF610 Tower Board
- const: fsl,vf610
- description: Toradex Colibri VF61 Module on Colibri Evaluation Board
items:
- const: toradex,vf610-colibri_vf61-on-eval
- const: toradex,vf610-colibri_vf61
- const: fsl,vf610
- description: ZII's VF610 based Boards
items:
@ -515,6 +805,7 @@ properties:
- ebs-systart,oxalis
- fsl,ls1012a-rdb
- fsl,ls1012a-frdm
- fsl,ls1012a-frwy
- fsl,ls1012a-qds
- const: fsl,ls1012a
@ -613,6 +904,15 @@ properties:
- enum:
- fsl,lx2160a-qds
- fsl,lx2160a-rdb
- fsl,lx2162a-qds
- const: fsl,lx2160a
- description: SolidRun LX2160A based Boards
items:
- enum:
- solidrun,clearfog-cx
- solidrun,honeycomb
- const: solidrun,lx2160a-cex7
- const: fsl,lx2160a
- description: S32V234 based Boards

4
Documentation/devicetree/bindings/arm/mediatek.yaml
View file

@ -84,6 +84,10 @@ properties:
- enum:
- mediatek,mt8135-evbp1
- const: mediatek,mt8135
- items:
- enum:
- mediatek,mt8167-pumpkin
- const: mediatek,mt8167
- description: Google Elm (Acer Chromebook R13)
items:
- const: google,elm-rev8

40
Documentation/devicetree/bindings/arm/mstar/mstar,smpctrl.yaml Normal file
View file

@ -0,0 +1,40 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2020 thingy.jp.
%YAML 1.2
---
$id: "http://devicetree.org/schemas/arm/mstar/mstar,smpctrl.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: MStar/SigmaStar Armv7 SoC SMP control registers
maintainers:
- Daniel Palmer <daniel@thingy.jp>
description: |
MStar/SigmaStar's Armv7 SoCs that have more than one processor
have a region of registers that allow setting the boot address
and a magic number that allows secondary processors to leave
the loop they are parked in by the boot ROM.
properties:
compatible:
items:
- enum:
- sstar,ssd201-smpctrl # SSD201/SSD202D
- const: mstar,smpctrl
reg:
maxItems: 1
required:
- compatible
- reg
additionalProperties: false
examples:
- |
smpctrl@204000 {
compatible = "sstar,ssd201-smpctrl", "mstar,smpctrl";
reg = <0x204000 0x200>;
};

6
Documentation/devicetree/bindings/arm/mstar/mstar.yaml
View file

@ -20,6 +20,12 @@ properties:
- thingyjp,breadbee-crust # thingy.jp BreadBee Crust
- const: mstar,infinity
- description: infinity2m boards
items:
- enum:
- honestar,ssd201htv2 # Honestar SSD201_HT_V2 devkit
- const: mstar,infinity2m
- description: infinity3 boards
items:
- enum:

1
Documentation/devicetree/bindings/arm/renesas.yaml
View file

@ -245,6 +245,7 @@ properties:
- enum:
- renesas,r8a7795
- renesas,r8a7796
- renesas,r8a77961
- renesas,r8a77965
- description: R-Car M3-N (R8A77965)

23
Documentation/devicetree/bindings/arm/rockchip.yaml
View file

@ -70,6 +70,24 @@ properties:
- const: elgin,rv1108-r1
- const: rockchip,rv1108
- description: Engicam PX30.Core C.TOUCH 2.0
items:
- const: engicam,px30-core-ctouch2
- const: engicam,px30-core
- const: rockchip,px30
- description: Engicam PX30.Core C.TOUCH 2.0 10.1" Open Frame
items:
- const: engicam,px30-core-ctouch2-of10
- const: engicam,px30-core
- const: rockchip,px30
- description: Engicam PX30.Core EDIMM2.2 Starter Kit
items:
- const: engicam,px30-core-edimm2.2
- const: engicam,px30-core
- const: rockchip,px30
- description: Firefly Firefly-RK3288
items:
- enum:
@ -381,6 +399,11 @@ properties:
- khadas,edge-v
- const: rockchip,rk3399
- description: Kobol Helios64
items:
- const: kobol,helios64
- const: rockchip,rk3399
- description: Mecer Xtreme Mini S6
items:
- const: mecer,xms6

21
Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
View file

@ -14,6 +14,19 @@ properties:
const: '/'
compatible:
oneOf:
- description: S3C2416 based boards
items:
- enum:
- samsung,smdk2416 # Samsung SMDK2416
- const: samsung,s3c2416
- description: S3C6410 based boards
items:
- enum:
- friendlyarm,mini6410 # FriendlyARM Mini6410
- samsung,smdk6410 # Samsung SMDK6410
- const: samsung,s3c6410
- description: S5PV210 based boards
items:
- enum:
@ -83,6 +96,14 @@ properties:
- const: samsung,exynos4412
- const: samsung,exynos4
- description: Samsung p4note family boards
items:
- enum:
- samsung,n8010 # Samsung GT-N8010/GT-N8013
- const: samsung,p4note
- const: samsung,exynos4412
- const: samsung,exynos4
- description: Exynos5250 based boards
items:
- enum:

4
Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
View file

@ -21,6 +21,10 @@ properties:
- st,stm32-power-config
- st,stm32-tamp
- const: syscon
- items:
- const: st,stm32-tamp
- const: syscon
- const: simple-mfd
reg:
maxItems: 1

23
Documentation/devicetree/bindings/arm/stm32/stm32.yaml
View file

@ -14,6 +14,20 @@ properties:
const: "/"
compatible:
oneOf:
- description: DH STM32MP1 SoM based Boards
items:
- enum:
- arrow,stm32mp157a-avenger96 # Avenger96
- dh,stm32mp153c-dhcom-drc02
- dh,stm32mp157c-dhcom-pdk2
- dh,stm32mp157c-dhcom-picoitx
- enum:
- dh,stm32mp153c-dhcom-som
- dh,stm32mp157a-dhcor-som
- dh,stm32mp157c-dhcom-som
- enum:
- st,stm32mp153
- st,stm32mp157
- items:
- enum:
- st,stm32f429i-disco
@ -39,8 +53,6 @@ properties:
- const: st,stm32h743
- items:
- enum:
- arrow,stm32mp157a-avenger96 # Avenger96
- lxa,stm32mp157c-mc1
- shiratech,stm32mp157a-iot-box # IoT Box
- shiratech,stm32mp157a-stinger96 # Stinger96
- st,stm32mp157c-ed1
@ -52,6 +64,13 @@ properties:
- const: st,stm32mp157c-ev1
- const: st,stm32mp157c-ed1
- const: st,stm32mp157
- description: Octavo OSD32MP15x System-in-Package based boards
items:
- enum:
- lxa,stm32mp157c-mc1 # Linux Automation MC-1
- const: oct,stm32mp15xx-osd32
- enum:
- st,stm32mp157
- description: Odyssey STM32MP1 SoM based Boards
items:
- enum:

23
Documentation/devicetree/bindings/arm/sunxi.yaml
View file

@ -201,6 +201,19 @@ properties:
- const: dserve,dsrv9703c
- const: allwinner,sun4i-a10
- description: Elimo Engineering Impetus SoM
items:
- const: elimo,impetus
- const: sochip,s3
- const: allwinner,sun8i-v3
- description: Elimo Engineering Initium
items:
- const: elimo,initium
- const: elimo,impetus
- const: sochip,s3
- const: allwinner,sun8i-v3
- description: Empire Electronix D709 Tablet
items:
- const: empire-electronix,d709
@ -251,6 +264,16 @@ properties:
- const: friendlyarm,nanopi-neo-plus2
- const: allwinner,sun50i-h5
- description: FriendlyARM NanoPi R1
items:
- const: friendlyarm,nanopi-r1
- const: allwinner,sun8i-h3
- description: FriendlyARM ZeroPi
items:
- const: friendlyarm,zeropi
- const: allwinner,sun8i-h3
- description: Gemei G9 Tablet
items:
- const: gemei,g9

3
Documentation/devicetree/bindings/arm/tegra.yaml
View file

@ -71,6 +71,9 @@ properties:
- const: asus,tilapia
- const: asus,grouper
- const: nvidia,tegra30
- items:
- const: ouya,ouya
- const: nvidia,tegra30
- items:
- enum:
- nvidia,dalmore

44
Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt
View file

@ -1,44 +0,0 @@
NVIDIA Tegra ACONNECT Bus
The Tegra ACONNECT bus is an AXI switch which is used to connnect various
components inside the Audio Processing Engine (APE). All CPU accesses to
the APE subsystem go through the ACONNECT via an APB to AXI wrapper.
Required properties:
- compatible: Must be "nvidia,tegra210-aconnect".
- clocks: Must contain the entries for the APE clock (TEGRA210_CLK_APE),
and APE interface clock (TEGRA210_CLK_APB2APE).
- clock-names: Must contain the names "ape" and "apb2ape" for the corresponding
'clocks' entries.
- power-domains: Must contain a phandle that points to the audio powergate
(namely 'aud') for Tegra210.
- #address-cells: The number of cells used to represent physical base addresses
in the aconnect address space. Should be 1.
- #size-cells: The number of cells used to represent the size of an address
range in the aconnect address space. Should be 1.
- ranges: Mapping of the aconnect address space to the CPU address space.
All devices accessed via the ACONNNECT are described by child-nodes.
Example:
aconnect@702c0000 {
compatible = "nvidia,tegra210-aconnect";
clocks = <&tegra_car TEGRA210_CLK_APE>,
<&tegra_car TEGRA210_CLK_APB2APE>;
clock-names = "ape", "apb2ape";
power-domains = <&pd_audio>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;
child1 {
...
};
child2 {
...
};
};

82
Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml Normal file
View file

@ -0,0 +1,82 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/bus/nvidia,tegra210-aconnect.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NVIDIA Tegra ACONNECT Bus
description: |
The Tegra ACONNECT bus is an AXI switch which is used to connnect various
components inside the Audio Processing Engine (APE). All CPU accesses to
the APE subsystem go through the ACONNECT via an APB to AXI wrapper. All
devices accessed via the ACONNNECT are described by child-nodes.
maintainers:
- Jon Hunter <jonathanh@nvidia.com>
properties:
compatible:
oneOf:
- const: nvidia,tegra210-aconnect
- items:
- enum:
- nvidia,tegra186-aconnect
- nvidia,tegra194-aconnect
- const: nvidia,tegra210-aconnect
clocks:
items:
- description: Must contain the entry for APE clock
- description: Must contain the entry for APE interface clock
clock-names:
items:
- const: ape
- const: apb2ape
power-domains:
maxItems: 1
"#address-cells":
const: 1
"#size-cells":
const: 1
ranges: true
patternProperties:
"@[0-9a-f]+$":
type: object
required:
- compatible
- clocks
- clock-names
- power-domains
- "#address-cells"
- "#size-cells"
- ranges
additionalProperties: false
examples:
- |
#include<dt-bindings/clock/tegra210-car.h>
aconnect@702c0000 {
compatible = "nvidia,tegra210-aconnect";
clocks = <&tegra_car TEGRA210_CLK_APE>,
<&tegra_car TEGRA210_CLK_APB2APE>;
clock-names = "ape", "apb2ape";
power-domains = <&pd_audio>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x702c0000 0x702c0000 0x00040000>;
// Child device nodes follow ...
};
...

79
Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
View file

@ -21,27 +21,58 @@ description: |
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. See the full list of clock IDs from:
include/dt-bindings/clock/imx8-clock.h
include/dt-bindings/clock/imx8-lpcg.h
properties:
compatible:
enum:
- fsl,imx8qxp-lpcg-adma
- fsl,imx8qxp-lpcg-conn
- fsl,imx8qxp-lpcg-dc
- fsl,imx8qxp-lpcg-dsp
- fsl,imx8qxp-lpcg-gpu
- fsl,imx8qxp-lpcg-hsio
- fsl,imx8qxp-lpcg-img
- fsl,imx8qxp-lpcg-lsio
- fsl,imx8qxp-lpcg-vpu
oneOf:
- const: fsl,imx8qxp-lpcg
- items:
- enum:
- fsl,imx8qm-lpcg
- const: fsl,imx8qxp-lpcg
- enum:
- fsl,imx8qxp-lpcg-adma
- fsl,imx8qxp-lpcg-conn
- fsl,imx8qxp-lpcg-dc
- fsl,imx8qxp-lpcg-dsp
- fsl,imx8qxp-lpcg-gpu
- fsl,imx8qxp-lpcg-hsio
- fsl,imx8qxp-lpcg-img
- fsl,imx8qxp-lpcg-lsio
- fsl,imx8qxp-lpcg-vpu
deprecated: true
reg:
maxItems: 1
'#clock-cells':
const: 1
clocks:
description: |
Input parent clocks phandle array for each clock
minItems: 1
maxItems: 8
clock-indices:
description: |
An integer array indicating the bit offset for each clock.
Refer to <include/dt-bindings/clock/imx8-lpcg.h> for the
supported LPCG clock indices.
minItems: 1
maxItems: 8
clock-output-names:
description: |
Shall be the corresponding names of the outputs.
NOTE this property must be specified in the same order
as the clock-indices property.
minItems: 1
maxItems: 8
power-domains:
maxItems: 1
required:
- compatible
- reg
@ -51,23 +82,33 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/clock/imx8-clock.h>
#include <dt-bindings/clock/imx8-lpcg.h>
#include <dt-bindings/firmware/imx/rsrc.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
clock-controller@5b200000 {
compatible = "fsl,imx8qxp-lpcg-conn";
reg = <0x5b200000 0xb0000>;
sdhc0_lpcg: clock-controller@5b200000 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x5b200000 0x10000>;
#clock-cells = <1>;
clocks = <&sdhc0_clk IMX_SC_PM_CLK_PER>,
<&conn_ipg_clk>,
<&conn_axi_clk>;
clock-indices = <IMX_LPCG_CLK_0>,
<IMX_LPCG_CLK_4>,
<IMX_LPCG_CLK_5>;
clock-output-names = "sdhc0_lpcg_per_clk",
"sdhc0_lpcg_ipg_clk",
"sdhc0_lpcg_ahb_clk";
power-domains = <&pd IMX_SC_R_SDHC_0>;
};
mmc@5b010000 {
compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x5b010000 0x10000>;
clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
<&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>,
<&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>;
clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
<&sdhc0_lpcg IMX_LPCG_CLK_0>,
<&sdhc0_lpcg IMX_LPCG_CLK_5>;
clock-names = "ipg", "per", "ahb";
power-domains = <&pd IMX_SC_R_SDHC_0>;
};

24
Documentation/devicetree/bindings/connector/usb-connector.yaml
View file

@ -93,6 +93,24 @@ properties:
- device
- dual
typec-power-opmode:
description: Determines the power operation mode that the Type C connector
will support and will advertise through CC pins when it has no power
delivery support.
- "default" corresponds to default USB voltage and current defined by the
USB 2.0 and USB 3.2 specifications, 5V 500mA for USB 2.0 ports and
5V 900mA or 1500mA for USB 3.2 ports in single-lane or dual-lane
operation respectively.
- "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB
Type-C Cable and Connector specification, when Power Delivery is not
supported.
allOf:
- $ref: /schemas/types.yaml#definitions/string
enum:
- default
- 1.5A
- 3.0A
# The following are optional properties for "usb-c-connector" with power
# delivery support.
source-pdos:
@ -192,6 +210,12 @@ allOf:
type:
const: micro
anyOf:
- not:
required:
- typec-power-opmode
- new-source-frs-typec-current
additionalProperties: true
examples:

56
Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.txt
View file

@ -1,56 +0,0 @@
* NVIDIA Tegra Audio DMA (ADMA) controller
The Tegra Audio DMA controller that is used for transferring data
between system memory and the Audio Processing Engine (APE).
Required properties:
- compatible: Should contain one of the following:
- "nvidia,tegra210-adma": for Tegra210
- "nvidia,tegra186-adma": for Tegra186 and Tegra194
- reg: Should contain DMA registers location and length. This should be
a single entry that includes all of the per-channel registers in one
contiguous bank.
- interrupts: Should contain all of the per-channel DMA interrupts in
ascending order with respect to the DMA channel index.
- clocks: Must contain one entry for the ADMA module clock
(TEGRA210_CLK_D_AUDIO).
- clock-names: Must contain the name "d_audio" for the corresponding
'clocks' entry.
- #dma-cells : Must be 1. The first cell denotes the receive/transmit
request number and should be between 1 and the maximum number of
requests supported. This value corresponds to the RX/TX_REQUEST_SELECT
fields in the ADMA_CHn_CTRL register.
Example:
adma: dma@702e2000 {
compatible = "nvidia,tegra210-adma";
reg = <0x0 0x702e2000 0x0 0x2000>;
interrupt-parent = <&tegra_agic>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
clock-names = "d_audio";
#dma-cells = <1>;
};

99
Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml Normal file
View file

@ -0,0 +1,99 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/dma/nvidia,tegra210-adma.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NVIDIA Tegra Audio DMA (ADMA) controller
description: |
The Tegra Audio DMA controller is used for transferring data
between system memory and the Audio Processing Engine (APE).
maintainers:
- Jon Hunter <jonathanh@nvidia.com>
allOf:
- $ref: "dma-controller.yaml#"
properties:
compatible:
oneOf:
- enum:
- nvidia,tegra210-adma
- nvidia,tegra186-adma
- items:
- const: nvidia,tegra194-adma
- const: nvidia,tegra186-adma
reg:
maxItems: 1
interrupts:
description: |
Should contain all of the per-channel DMA interrupts in
ascending order with respect to the DMA channel index.
minItems: 1
maxItems: 32
clocks:
description: Must contain one entry for the ADMA module clock
maxItems: 1
clock-names:
const: d_audio
"#dma-cells":
description: |
The first cell denotes the receive/transmit request number and
should be between 1 and the maximum number of requests supported.
This value corresponds to the RX/TX_REQUEST_SELECT fields in the
ADMA_CHn_CTRL register.
const: 1
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include<dt-bindings/clock/tegra210-car.h>
dma-controller@702e2000 {
compatible = "nvidia,tegra210-adma";
reg = <0x702e2000 0x2000>;
interrupt-parent = <&tegra_agic>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
clock-names = "d_audio";
#dma-cells = <1>;
};
...

9
Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
View file

@ -35,7 +35,6 @@ properties:
- arm,gic-400
- arm,pl390
- arm,tc11mp-gic
- nvidia,tegra210-agic
- qcom,msm-8660-qgic
- qcom,msm-qgic2
@ -53,6 +52,14 @@ properties:
- const: brcm,brahma-b15-gic
- const: arm,cortex-a15-gic
- oneOf:
- const: nvidia,tegra210-agic
- items:
- enum:
- nvidia,tegra186-agic
- nvidia,tegra194-agic
- const: nvidia,tegra210-agic
interrupt-controller: true
"#address-cells":

149
Documentation/devicetree/bindings/net/dsa/b53.txt
View file

@ -1,149 +0,0 @@
Broadcom BCM53xx Ethernet switches
==================================
Required properties:
- compatible: For external switch chips, compatible string must be exactly one
of: "brcm,bcm5325"
"brcm,bcm53115"
"brcm,bcm53125"
"brcm,bcm53128"
"brcm,bcm5365"
"brcm,bcm5395"
"brcm,bcm5389"
"brcm,bcm5397"
"brcm,bcm5398"
For the BCM11360 SoC, must be:
"brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab" string
For the BCM5310x SoCs with an integrated switch, must be one of:
"brcm,bcm53010-srab"
"brcm,bcm53011-srab"
"brcm,bcm53012-srab"
"brcm,bcm53018-srab"
"brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string
For the BCM5831X/BCM1140x SoCs with an integrated switch, must be one of:
"brcm,bcm11404-srab"
"brcm,bcm11407-srab"
"brcm,bcm11409-srab"
"brcm,bcm58310-srab"
"brcm,bcm58311-srab"
"brcm,bcm58313-srab" and the mandatory "brcm,omega-srab" string
For the BCM585xx/586XX/88312 SoCs with an integrated switch, must be one of:
"brcm,bcm58522-srab"
"brcm,bcm58523-srab"
"brcm,bcm58525-srab"
"brcm,bcm58622-srab"
"brcm,bcm58623-srab"
"brcm,bcm58625-srab"
"brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string
For the BCM63xx/33xx SoCs with an integrated switch, must be one of:
"brcm,bcm3384-switch"
"brcm,bcm6328-switch"
"brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
Required properties for BCM585xx/586xx/88312 SoCs:
- reg: a total of 3 register base addresses, the first one must be the
Switch Register Access block base, the second is the port 5/4 mux
configuration register and the third one is the SGMII configuration
and status register base address.
- interrupts: a total of 13 interrupts must be specified, in the following
order: port 0-5, 7-8 link status change, then the integrated PHY interrupt,
then the timestamping interrupt and the sleep timer interrupts for ports
5,7,8.
Optional properties for BCM585xx/586xx/88312 SoCs:
- reg-names: a total of 3 names matching the 3 base register address, must
be in the following order:
"srab"
"mux_config"
"sgmii_config"
- interrupt-names: a total of 13 names matching the 13 interrupts specified
must be in the following order:
"link_state_p0"
"link_state_p1"
"link_state_p2"
"link_state_p3"
"link_state_p4"
"link_state_p5"
"link_state_p7"
"link_state_p8"
"phy"
"ts"
"imp_sleep_timer_p5"
"imp_sleep_timer_p7"
"imp_sleep_timer_p8"
See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
required and optional properties.
Examples:
Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
eth0: ethernet@10001000 {
compatible = "brcm,unimac";
reg = <0x10001000 0x1000>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
mdio0: mdio@10000000 {
compatible = "brcm,unimac-mdio";
#address-cells = <1>;
#size-cells = <0>;
switch0: ethernet-switch@1e {
compatible = "brcm,bcm53125";
reg = <30>;
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port0@0 {
reg = <0>;
label = "lan1";
};
port1@1 {
reg = <1>;
label = "lan2";
};
port5@5 {
reg = <5>;
label = "cable-modem";
fixed-link {
speed = <1000>;
full-duplex;
};
phy-mode = "rgmii-txid";
};
port8@8 {
reg = <8>;
label = "cpu";
fixed-link {
speed = <1000>;
full-duplex;
};
phy-mode = "rgmii-txid";
ethernet = <&eth0>;
};
};
};
};

249
Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml Normal file
View file

@ -0,0 +1,249 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/dsa/brcm,b53.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Broadcom BCM53xx Ethernet switches
allOf:
- $ref: dsa.yaml#
maintainers:
- Florian Fainelli <f.fainelli@gmail.com>
description:
Broadcom BCM53xx Ethernet switches
properties:
compatible:
oneOf:
- const: brcm,bcm5325
- const: brcm,bcm53115
- const: brcm,bcm53125
- const: brcm,bcm53128
- const: brcm,bcm5365
- const: brcm,bcm5395
- const: brcm,bcm5389
- const: brcm,bcm5397
- const: brcm,bcm5398
- items:
- const: brcm,bcm11360-srab
- const: brcm,cygnus-srab
- items:
- enum:
- brcm,bcm53010-srab
- brcm,bcm53011-srab
- brcm,bcm53012-srab
- brcm,bcm53018-srab
- brcm,bcm53019-srab
- const: brcm,bcm5301x-srab
- items:
- enum:
- brcm,bcm11404-srab
- brcm,bcm11407-srab
- brcm,bcm11409-srab
- brcm,bcm58310-srab
- brcm,bcm58311-srab
- brcm,bcm58313-srab
- const: brcm,omega-srab
- items:
- enum:
- brcm,bcm58522-srab
- brcm,bcm58523-srab
- brcm,bcm58525-srab
- brcm,bcm58622-srab
- brcm,bcm58623-srab
- brcm,bcm58625-srab
- brcm,bcm88312-srab
- const: brcm,nsp-srab
- items:
- enum:
- brcm,bcm3384-switch
- brcm,bcm6328-switch
- brcm,bcm6368-switch
- const: brcm,bcm63xx-switch
required:
- compatible
- reg
# BCM585xx/586xx/88312 SoCs
if:
properties:
compatible:
contains:
enum:
- brcm,bcm58522-srab
- brcm,bcm58523-srab
- brcm,bcm58525-srab
- brcm,bcm58622-srab
- brcm,bcm58623-srab
- brcm,bcm58625-srab
- brcm,bcm88312-srab
then:
properties:
reg:
minItems: 3
maxItems: 3
reg-names:
items:
- const: srab
- const: mux_config
- const: sgmii_config
interrupts:
minItems: 13
maxItems: 13
interrupt-names:
items:
- const: link_state_p0
- const: link_state_p1
- const: link_state_p2
- const: link_state_p3
- const: link_state_p4
- const: link_state_p5
- const: link_state_p7
- const: link_state_p8
- const: phy
- const: ts
- const: imp_sleep_timer_p5
- const: imp_sleep_timer_p7
- const: imp_sleep_timer_p8
required:
- interrupts
else:
properties:
reg:
maxItems: 1
unevaluatedProperties: false
examples:
- |
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethernet-switch@1e {
compatible = "brcm,bcm53125";
reg = <30>;
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@5 {
reg = <5>;
label = "cable-modem";
phy-mode = "rgmii-txid";
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@8 {
reg = <8>;
label = "cpu";
phy-mode = "rgmii-txid";
ethernet = <&eth0>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
axi {
#address-cells = <1>;
#size-cells = <1>;
switch@36000 {
compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
reg = <0x36000 0x1000>,
<0x3f308 0x8>,
<0x3f410 0xc>;
reg-names = "srab", "mux_config", "sgmii_config";
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "link_state_p0",
"link_state_p1",
"link_state_p2",
"link_state_p3",
"link_state_p4",
"link_state_p5",
"link_state_p7",
"link_state_p8",
"phy",
"ts",
"imp_sleep_timer_p5",
"imp_sleep_timer_p7",
"imp_sleep_timer_p8";
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
label = "port0";
reg = <0>;
};
port@1 {
label = "port1";
reg = <1>;
};
port@2 {
label = "port2";
reg = <2>;
};
port@3 {
label = "port3";
reg = <3>;
};
port@4 {
label = "port4";
reg = <4>;
};
port@8 {
ethernet = <&amac2>;
label = "cpu";
reg = <8>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};

6
Documentation/devicetree/bindings/net/dsa/dsa.yaml
View file

@ -20,7 +20,7 @@ select: false
properties:
$nodename:
pattern: "^switch(@.*)?$"
pattern: "^(ethernet-)?switch(@.*)?$"
dsa,member:
minItems: 2
@ -78,6 +78,10 @@ patternProperties:
mac-address: true
sfp: true
managed: true
required:
- reg

1
Documentation/devicetree/bindings/net/ethernet-controller.yaml
View file

@ -95,6 +95,7 @@ properties:
# 10GBASE-KR, XFI, SFI
- 10gbase-kr
- usxgmii
- 10gbase-r
phy-mode:
$ref: "#/properties/phy-connection-type"

60
Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml Normal file
View file

@ -0,0 +1,60 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/fsl,qoriq-mc-dpmac.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: DPAA2 MAC bindings
maintainers:
- Ioana Ciornei <ioana.ciornei@nxp.com>
description:
This binding represents the DPAA2 MAC objects found on the fsl-mc bus and
located under the 'dpmacs' node for the fsl-mc bus DTS node.
allOf:
- $ref: "ethernet-controller.yaml#"
properties:
compatible:
const: fsl,qoriq-mc-dpmac
reg:
maxItems: 1
description: The DPMAC number
phy-handle: true
phy-connection-type: true
phy-mode: true
pcs-handle:
$ref: /schemas/types.yaml#definitions/phandle
description:
A reference to a node representing a PCS PHY device found on
the internal MDIO bus.
managed: true
required:
- reg
additionalProperties: false
examples:
- |
dpmacs {
#address-cells = <1>;
#size-cells = <0>;
ethernet@4 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x4>;
phy-handle = <&mdio1_phy6>;
phy-connection-type = "qsgmii";
managed = "in-band-status";
pcs-handle = <&pcs3_1>;
};
};

2
Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.txt
View file

@ -99,7 +99,7 @@ Example:
nvidia,schmitt = <TEGRA_PIN_DISABLE>;
nvidia,lpdr = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>;
nvidia,io-hv = <TEGRA_PIN_ENABLE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};

293
Documentation/devicetree/bindings/power/mediatek,power-controller.yaml Normal file
View file

@ -0,0 +1,293 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/mediatek,power-controller.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Mediatek Power Domains Controller
maintainers:
- Weiyi Lu <weiyi.lu@mediatek.com>
- Matthias Brugger <mbrugger@suse.com>
description: |
Mediatek processors include support for multiple power domains which can be
powered up/down by software based on different application scenes to save power.
IP cores belonging to a power domain should contain a 'power-domains'
property that is a phandle for SCPSYS node representing the domain.
properties:
$nodename:
const: power-controller
compatible:
enum:
- mediatek,mt8173-power-controller
- mediatek,mt8183-power-controller
- mediatek,mt8192-power-controller
'#power-domain-cells':
const: 1
'#address-cells':
const: 1
'#size-cells':
const: 0
patternProperties:
"^power-domain@[0-9a-f]+$":
type: object
description: |
Represents the power domains within the power controller node as documented
in Documentation/devicetree/bindings/power/power-domain.yaml.
properties:
'#power-domain-cells':
description:
Must be 0 for nodes representing a single PM domain and 1 for nodes
providing multiple PM domains.
'#address-cells':
const: 1
'#size-cells':
const: 0
reg:
description: |
Power domain index. Valid values are defined in:
"include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
"include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain.
"include/dt-bindings/power/mt8192-power.h" - for MT8192 type power domain.
maxItems: 1
clocks:
description: |
A number of phandles to clocks that need to be enabled during domain
power-up sequencing.
clock-names:
description: |
List of names of clocks, in order to match the power-up sequencing
for each power domain we need to group the clocks by name. BASIC
clocks need to be enabled before enabling the corresponding power
domain, and should not have a '-' in their name (i.e mm, mfg, venc).
SUSBYS clocks need to be enabled before releasing the bus protection,
and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
In order to follow properly the power-up sequencing, the clocks must
be specified by order, adding first the BASIC clocks followed by the
SUSBSYS clocks.
mediatek,infracfg:
$ref: /schemas/types.yaml#definitions/phandle
description: phandle to the device containing the INFRACFG register range.
mediatek,smi:
$ref: /schemas/types.yaml#definitions/phandle
description: phandle to the device containing the SMI register range.
patternProperties:
"^power-domain@[0-9a-f]+$":
type: object
description: |
Represents a power domain child within a power domain parent node.
properties:
'#power-domain-cells':
description:
Must be 0 for nodes representing a single PM domain and 1 for nodes
providing multiple PM domains.
'#address-cells':
const: 1
'#size-cells':
const: 0
reg:
maxItems: 1
clocks:
description: |
A number of phandles to clocks that need to be enabled during domain
power-up sequencing.
clock-names:
description: |
List of names of clocks, in order to match the power-up sequencing
for each power domain we need to group the clocks by name. BASIC
clocks need to be enabled before enabling the corresponding power
domain, and should not have a '-' in their name (i.e mm, mfg, venc).
SUSBYS clocks need to be enabled before releasing the bus protection,
and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
In order to follow properly the power-up sequencing, the clocks must
be specified by order, adding first the BASIC clocks followed by the
SUSBSYS clocks.
mediatek,infracfg:
$ref: /schemas/types.yaml#definitions/phandle
description: phandle to the device containing the INFRACFG register range.
mediatek,smi:
$ref: /schemas/types.yaml#definitions/phandle
description: phandle to the device containing the SMI register range.
patternProperties:
"^power-domain@[0-9a-f]+$":
type: object
description: |
Represents a power domain child within a power domain parent node.
properties:
'#power-domain-cells':
description:
Must be 0 for nodes representing a single PM domain and 1 for nodes
providing multiple PM domains.
'#address-cells':
const: 1
'#size-cells':
const: 0
reg:
maxItems: 1
clocks:
description: |
A number of phandles to clocks that need to be enabled during domain
power-up sequencing.
clock-names:
description: |
List of names of clocks, in order to match the power-up sequencing
for each power domain we need to group the clocks by name. BASIC
clocks need to be enabled before enabling the corresponding power
domain, and should not have a '-' in their name (i.e mm, mfg, venc).
SUSBYS clocks need to be enabled before releasing the bus protection,
and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
In order to follow properly the power-up sequencing, the clocks must
be specified by order, adding first the BASIC clocks followed by the
SUSBSYS clocks.
mediatek,infracfg:
$ref: /schemas/types.yaml#definitions/phandle
description: phandle to the device containing the INFRACFG register range.
mediatek,smi:
$ref: /schemas/types.yaml#definitions/phandle
description: phandle to the device containing the SMI register range.
required:
- reg
additionalProperties: false
required:
- reg
additionalProperties: false
required:
- reg
additionalProperties: false
required:
- compatible
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/mt8173-clk.h>
#include <dt-bindings/power/mt8173-power.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
scpsys: syscon@10006000 {
compatible = "syscon", "simple-mfd";
reg = <0 0x10006000 0 0x1000>;
spm: power-controller {
compatible = "mediatek,mt8173-power-controller";
#address-cells = <1>;
#size-cells = <0>;
#power-domain-cells = <1>;
/* power domains of the SoC */
power-domain@MT8173_POWER_DOMAIN_VDEC {
reg = <MT8173_POWER_DOMAIN_VDEC>;
clocks = <&topckgen CLK_TOP_MM_SEL>;
clock-names = "mm";
#power-domain-cells = <0>;
};
power-domain@MT8173_POWER_DOMAIN_VENC {
reg = <MT8173_POWER_DOMAIN_VENC>;
clocks = <&topckgen CLK_TOP_MM_SEL>,
<&topckgen CLK_TOP_VENC_SEL>;
clock-names = "mm", "venc";
#power-domain-cells = <0>;
};
power-domain@MT8173_POWER_DOMAIN_ISP {
reg = <MT8173_POWER_DOMAIN_ISP>;
clocks = <&topckgen CLK_TOP_MM_SEL>;
clock-names = "mm";
#power-domain-cells = <0>;
};
power-domain@MT8173_POWER_DOMAIN_MM {
reg = <MT8173_POWER_DOMAIN_MM>;
clocks = <&topckgen CLK_TOP_MM_SEL>;
clock-names = "mm";
#power-domain-cells = <0>;
mediatek,infracfg = <&infracfg>;
};
power-domain@MT8173_POWER_DOMAIN_VENC_LT {
reg = <MT8173_POWER_DOMAIN_VENC_LT>;
clocks = <&topckgen CLK_TOP_MM_SEL>,
<&topckgen CLK_TOP_VENC_LT_SEL>;
clock-names = "mm", "venclt";
#power-domain-cells = <0>;
};
power-domain@MT8173_POWER_DOMAIN_AUDIO {
reg = <MT8173_POWER_DOMAIN_AUDIO>;
#power-domain-cells = <0>;
};
power-domain@MT8173_POWER_DOMAIN_USB {
reg = <MT8173_POWER_DOMAIN_USB>;
#power-domain-cells = <0>;
};
power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC {
reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
clocks = <&clk26m>;
clock-names = "mfg";
#address-cells = <1>;
#size-cells = <0>;
#power-domain-cells = <1>;
power-domain@MT8173_POWER_DOMAIN_MFG_2D {
reg = <MT8173_POWER_DOMAIN_MFG_2D>;
#address-cells = <1>;
#size-cells = <0>;
#power-domain-cells = <1>;
power-domain@MT8173_POWER_DOMAIN_MFG {
reg = <MT8173_POWER_DOMAIN_MFG>;
#power-domain-cells = <0>;
mediatek,infracfg = <&infracfg>;
};
};
};
};
};
};

87
Documentation/devicetree/bindings/usb/st,stusb160x.yaml Normal file
View file

@ -0,0 +1,87 @@
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: "http://devicetree.org/schemas/usb/st,stusb160x.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: STMicroelectronics STUSB160x Type-C controller bindings
maintainers:
- Amelie Delaunay <amelie.delaunay@st.com>
properties:
compatible:
enum:
- st,stusb1600
reg:
maxItems: 1
interrupts:
maxItems: 1
vdd-supply:
description: main power supply (4.1V-22V)
vsys-supply:
description: low power supply (3.0V-5.5V)
vconn-supply:
description: power supply (2.7V-5.5V) used to supply VConn on CC pin in
source or dual power role
connector:
type: object
allOf:
- $ref: ../connector/usb-connector.yaml
properties:
compatible:
const: usb-c-connector
power-role: true
typec-power-opmode: true
required:
- compatible
required:
- compatible
- reg
- connector
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c4 {
#address-cells = <1>;
#size-cells = <0>;
typec: stusb1600@28 {
compatible = "st,stusb1600";
reg = <0x28>;
vdd-supply = <&vbus_drd>;
vsys-supply = <&vdd_usb>;
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
interrupt-parent = <&gpioi>;
typec_con: connector {
compatible = "usb-c-connector";
label = "USB-C";
power-role = "dual";
data-role = "dual";
typec-power-opmode = "default";
port {
typec_con_ep: endpoint {
remote-endpoint = <&usbotg_hs_ep>;
};
};
};
};
};
...

24
Documentation/devicetree/bindings/vendor-prefixes.yaml
View file

@ -25,6 +25,8 @@ patternProperties:
# Keep list in alphabetical order.
"^70mai,.*":
description: 70mai Co., Ltd.
"^abb,.*":
description: ABB
"^abilis,.*":
description: Abilis Systems
"^abracon,.*":
@ -67,6 +69,8 @@ patternProperties:
description: AlphaScale Integrated Circuits Systems, Inc.
"^alps,.*":
description: Alps Electric Co., Ltd.
"^alt,.*":
description: Altus-Escon-Company BV
"^altr,.*":
description: Altera Corp.
"^amarula,.*":
@ -319,10 +323,14 @@ patternProperties:
description: Einfochips
"^elan,.*":
description: Elan Microelectronic Corp.
"^element14,.*":
description: Element14 (A Premier Farnell Company)
"^elgin,.*":
description: Elgin S/A.
"^elida,.*":
description: Shenzhen Elida Technology Co., Ltd.
"^elimo,.*":
description: Elimo Engineering Ltd.
"^embest,.*":
description: Shenzhen Embest Technology Co., Ltd.
"^emlid,.*":
@ -459,6 +467,8 @@ patternProperties:
description: Holt Integrated Circuits, Inc.
"^honeywell,.*":
description: Honeywell
"^honestar,.*":
description: Honestar Technologies Co., Ltd.
"^hoperun,.*":
description: Jiangsu HopeRun Software Co., Ltd.
"^hp,.*":
@ -561,6 +571,8 @@ patternProperties:
description: Kionix, Inc.
"^kobo,.*":
description: Rakuten Kobo Inc.
"^kobol,.*":
description: Kobol Innovations Pte. Ltd.
"^koe,.*":
description: Kaohsiung Opto-Electronics Inc.
"^kontron,.*":
@ -679,6 +691,8 @@ patternProperties:
description: Micron Technology Inc.
"^microsoft,.*":
description: Microsoft Corporation
"^microsys,.*":
description: MicroSys Electronics GmbH
"^mikroe,.*":
description: MikroElektronika d.o.o.
"^mikrotik,.*":
@ -772,6 +786,8 @@ patternProperties:
description: NXP Semiconductors
"^oceanic,.*":
description: Oceanic Systems (UK) Ltd.
"^oct,.*":
description: Octavo Systems LLC
"^okaya,.*":
description: Okaya Electric America, Inc.
"^oki,.*":
@ -804,6 +820,8 @@ patternProperties:
description: Ortus Technology Co., Ltd.
"^osddisplays,.*":
description: OSD Displays
"^ouya,.*":
description: Ouya Inc.
"^overkiz,.*":
description: Overkiz SAS
"^ovti,.*":
@ -906,6 +924,8 @@ patternProperties:
description: iMX6 Rex Project
"^rervision,.*":
description: Shenzhen Rervision Technology Co., Ltd.
"^revotics,.*":
description: Revolution Robotics, Inc. (Revotics)
"^richtek,.*":
description: Richtek Technology Corporation
"^ricoh,.*":
@ -1154,12 +1174,16 @@ patternProperties:
description: Vamrs Ltd.
"^variscite,.*":
description: Variscite Ltd.
"^vdl,.*":
description: Van der Laan b.v.
"^via,.*":
description: VIA Technologies, Inc.
"^videostrong,.*":
description: Videostrong Technology Co., Ltd.
"^virtio,.*":
description: Virtual I/O Device Specification, developed by the OASIS consortium
"^virtual,.*":
description: Used for virtual device without specific vendor.
"^vishay,.*":
description: Vishay Intertechnology, Inc
"^vitesse,.*":

16
Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml
View file

@ -18,10 +18,26 @@ properties:
- const: fsl,imx21-wdt
- items:
- enum:
- fsl,imx25-wdt
- fsl,imx27-wdt
- fsl,imx31-wdt
- fsl,imx35-wdt
- fsl,imx50-wdt
- fsl,imx51-wdt
- fsl,imx53-wdt
- fsl,imx6q-wdt
- fsl,imx6sl-wdt
- fsl,imx6sll-wdt
- fsl,imx6sx-wdt
- fsl,imx6ul-wdt
- fsl,imx7d-wdt
- fsl,imx8mm-wdt
- fsl,imx8mn-wdt
- fsl,imx8mp-wdt
- fsl,imx8mq-wdt
- fsl,ls1012a-wdt
- fsl,ls1043a-wdt
- fsl,vf610-wdt
- const: fsl,imx21-wdt
reg:

3
MAINTAINERS
View file

@ -2148,6 +2148,7 @@ W: http://linux-chenxing.org/
F: Documentation/devicetree/bindings/arm/mstar/*
F: arch/arm/boot/dts/mstar-*
F: arch/arm/mach-mstar/
F: include/dt-bindings/gpio/msc313-gpio.h
ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
M: Michael Petchkovsky <mkpetch@internode.on.net>
@ -3394,7 +3395,7 @@ M: Florian Fainelli <f.fainelli@gmail.com>
L: netdev@vger.kernel.org
L: openwrt-devel@lists.openwrt.org (subscribers-only)
S: Supported
F: Documentation/devicetree/bindings/net/dsa/b53.txt
F: Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
F: drivers/net/dsa/b53/*
F: include/linux/platform_data/b53.h

31
arch/arm/boot/dts/Makefile
View file

@ -197,6 +197,7 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \
exynos4412-odroidx.dtb \
exynos4412-odroidx2.dtb \
exynos4412-origen.dtb \
exynos4412-p4note-n8010.dtb \
exynos4412-smdk4412.dtb \
exynos4412-tiny4412.dtb \
exynos4412-trats2.dtb
@ -339,7 +340,10 @@ dtb-$(CONFIG_ARCH_LPC32XX) += \
lpc3250-ea3250.dtb \
lpc3250-phy3250.dtb
dtb-$(CONFIG_ARCH_NPCM7XX) += \
nuvoton-npcm750-evb.dtb
nuvoton-npcm730-gsj.dtb \
nuvoton-npcm730-kudo.dtb \
nuvoton-npcm750-evb.dtb \
nuvoton-npcm750-runbmc-olympus.dtb
dtb-$(CONFIG_MACH_MESON6) += \
meson6-atv1200.dtb
dtb-$(CONFIG_MACH_MESON8) += \
@ -414,6 +418,7 @@ dtb-$(CONFIG_SOC_IMX53) += \
imx53-usbarmory.dtb \
imx53-voipac-bsb.dtb
dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-alti6p.dtb \
imx6dl-apf6dev.dtb \
imx6dl-aristainetos_4.dtb \
imx6dl-aristainetos_7.dtb \
@ -450,6 +455,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-icore.dtb \
imx6dl-icore-mipi.dtb \
imx6dl-icore-rqs.dtb \
imx6dl-lanmcu.dtb \
imx6dl-mamoj.dtb \
imx6dl-nit6xlite.dtb \
imx6dl-nitrogen6x.dtb \
@ -581,6 +587,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6qp-nitrogen6_max.dtb \
imx6qp-nitrogen6_som2.dtb \
imx6qp-phytec-mira-rdk-nand.dtb \
imx6qp-prtwd3.dtb \
imx6qp-sabreauto.dtb \
imx6qp-sabresd.dtb \
imx6qp-tx6qp-8037.dtb \
@ -622,6 +629,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-pico-dwarf.dtb \
imx6ul-pico-hobbit.dtb \
imx6ul-pico-pi.dtb \
imx6ul-phytec-segin-ff-rdk-emmc.dtb \
imx6ul-phytec-segin-ff-rdk-nand.dtb \
imx6ul-tx6ul-0010.dtb \
imx6ul-tx6ul-0011.dtb \
@ -641,6 +649,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-colibri-emmc-aster.dtb \
imx7d-colibri-emmc-eval-v3.dtb \
imx7d-colibri-eval-v3.dtb \
imx7d-flex-concentrator.dtb \
imx7d-flex-concentrator-mfg.dtb \
imx7d-mba7.dtb \
imx7d-meerkat96.dtb \
imx7d-nitrogen7.dtb \
@ -1066,6 +1076,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32mp157a-iot-box.dtb \
stm32mp157a-stinger96.dtb \
stm32mp157c-dhcom-pdk2.dtb \
stm32mp157c-dhcom-picoitx.dtb \
stm32mp157c-dk2.dtb \
stm32mp157c-ed1.dtb \
stm32mp157c-ev1.dtb \
@ -1192,6 +1203,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-h3-nanopi-m1-plus.dtb \
sun8i-h3-nanopi-neo.dtb \
sun8i-h3-nanopi-neo-air.dtb \
sun8i-h3-nanopi-r1.dtb \
sun8i-h3-orangepi-2.dtb \
sun8i-h3-orangepi-lite.dtb \
sun8i-h3-orangepi-one.dtb \
@ -1201,12 +1213,14 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-h3-orangepi-plus2e.dtb \
sun8i-h3-orangepi-zero-plus2.dtb \
sun8i-h3-rervision-dvk.dtb \
sun8i-h3-zeropi.dtb \
sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
sun8i-r16-bananapi-m2m.dtb \
sun8i-r16-nintendo-nes-classic.dtb \
sun8i-r16-nintendo-super-nes-classic.dtb \
sun8i-r16-parrot.dtb \
sun8i-r40-bananapi-m2-ultra.dtb \
sun8i-s3-elimo-initium.dtb \
sun8i-s3-lichee-zero-plus.dtb \
sun8i-s3-pinecube.dtb \
sun8i-t3-cqa3t-bv3.dtb \
@ -1241,7 +1255,8 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
tegra30-beaver.dtb \
tegra30-cardhu-a02.dtb \
tegra30-cardhu-a04.dtb \
tegra30-colibri-eval-v3.dtb
tegra30-colibri-eval-v3.dtb \
tegra30-ouya.dtb
dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
tegra114-dalmore.dtb \
tegra114-roth.dtb \
@ -1302,6 +1317,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
zynq-zc770-xm013.dtb \
zynq-zed.dtb \
zynq-zturn.dtb \
zynq-zturn-v5.dtb \
zynq-zybo.dtb \
zynq-zybo-z7.dtb
dtb-$(CONFIG_MACH_ARMADA_370) += \
@ -1319,6 +1335,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb
dtb-$(CONFIG_MACH_ARMADA_38X) += \
armada-382-rd-ac3x-48g4x2xl.dtb \
armada-385-clearfog-gtr-s4.dtb \
armada-385-clearfog-gtr-l8.dtb \
armada-385-db-88f6820-amc.dtb \
@ -1340,6 +1357,12 @@ dtb-$(CONFIG_MACH_ARMADA_39X) += \
armada-398-db.dtb
dtb-$(CONFIG_MACH_ARMADA_XP) += \
armada-xp-axpwifiap.dtb \
armada-xp-crs305-1g-4s.dtb \
armada-xp-crs305-1g-4s-bit.dtb \
armada-xp-crs326-24g-2s.dtb \
armada-xp-crs326-24g-2s-bit.dtb \
armada-xp-crs328-4c-20s-4s.dtb \
armada-xp-crs328-4c-20s-4s-bit.dtb \
armada-xp-db.dtb \
armada-xp-db-dxbc2.dtb \
armada-xp-db-xc3-24g4xg.dtb \
@ -1372,6 +1395,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
dtb-$(CONFIG_ARCH_MSTARV7) += \
mstar-infinity-msc313-breadbee_crust.dtb \
mstar-infinity2m-ssd202d-ssd201htv2.dtb \
mstar-infinity3-msc313e-breadbee.dtb \
mstar-mercury5-ssc8336n-midrived08.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
@ -1381,7 +1405,9 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-amd-ethanolx.dtb \
aspeed-bmc-arm-centriq2400-rep.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-bytedance-g220a.dtb \
aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-galaxy100.dtb \
aspeed-bmc-facebook-minipack.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-facebook-wedge40.dtb \
@ -1390,6 +1416,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-yamp.dtb \
aspeed-bmc-facebook-yosemitev2.dtb \
aspeed-bmc-ibm-rainier.dtb \
aspeed-bmc-ibm-rainier-4u.dtb \
aspeed-bmc-intel-s2600wf.dtb \
aspeed-bmc-inspur-fp5280g2.dtb \
aspeed-bmc-lenovo-hr630.dtb \

2
arch/arm/boot/dts/am335x-baltos.dtsi
View file

@ -168,7 +168,7 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad5.gpm
AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */
AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */
AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */

54
arch/arm/boot/dts/am335x-boneblue.dts
View file

@ -241,6 +241,30 @@ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* (E18) uart0_cts
AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT, MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */
>;
};
/* E1 */
eqep0_pins: pinmux_eqep0_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT, MUX_MODE1) /* (B12) mcasp0_aclkr.eQEP0A_in */
AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_INPUT, MUX_MODE1) /* (C13) mcasp0_fsr.eQEP0B_in */
>;
};
/* E2 */
eqep1_pins: pinmux_eqep1_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT, MUX_MODE2) /* (V2) lcd_data12.eQEP1A_in */
AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_INPUT, MUX_MODE2) /* (V3) lcd_data13.eQEP1B_in */
>;
};
/* E3 */
eqep2_pins: pinmux_eqep2_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE4) /* (T12) gpmc_ad12.eQEP2A_in */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE4) /* (R12) gpmc_ad13.eQEP2B_in */
>;
};
};
&uart0 {
@ -419,3 +443,33 @@ ls_buf_en {
line-name = "LS_BUF_EN";
};
};
&epwmss0 {
status = "okay";
};
&eqep0 {
pinctrl-names = "default";
pinctrl-0 = <&eqep0_pins>;
status = "okay";
};
&epwmss1 {
status = "okay";
};
&eqep1 {
pinctrl-names = "default";
pinctrl-0 = <&eqep1_pins>;
status = "okay";
};
&epwmss2 {
status = "okay";
};
&eqep2 {
pinctrl-names = "default";
pinctrl-0 = <&eqep2_pins>;
status = "okay";
};

2
arch/arm/boot/dts/am335x-cm-t335.dts
View file

@ -122,7 +122,7 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
/* gpmc_wpn.gpio0_30 */
/* gpmc_wpn.gpio0_31 */
AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7)
AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)

2
arch/arm/boot/dts/am335x-evm.dts
View file

@ -229,7 +229,7 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */
AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */
AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)

2
arch/arm/boot/dts/am335x-igep0033.dtsi
View file

@ -70,7 +70,7 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_30 */
AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */
AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)

27
arch/arm/boot/dts/am33xx-l4.dtsi
View file

@ -1923,6 +1923,15 @@ ecap0: ecap@100 {
status = "disabled";
};
eqep0: counter@180 {
compatible = "ti,am3352-eqep";
reg = <0x180 0x80>;
clocks = <&l4ls_gclk>;
clock-names = "sysclkout";
interrupts = <79>;
status = "disabled";
};
ehrpwm0: pwm@200 {
compatible = "ti,am3352-ehrpwm",
"ti,am33xx-ehrpwm";
@ -1975,6 +1984,15 @@ ecap1: ecap@100 {
status = "disabled";
};
eqep1: counter@180 {
compatible = "ti,am3352-eqep";
reg = <0x180 0x80>;
clocks = <&l4ls_gclk>;
clock-names = "sysclkout";
interrupts = <88>;
status = "disabled";
};
ehrpwm1: pwm@200 {
compatible = "ti,am3352-ehrpwm",
"ti,am33xx-ehrpwm";
@ -2027,6 +2045,15 @@ ecap2: ecap@100 {
status = "disabled";
};
eqep2: counter@180 {
compatible = "ti,am3352-eqep";
reg = <0x180 0x80>;
clocks = <&l4ls_gclk>;
clock-names = "sysclkout";
interrupts = <89>;
status = "disabled";
};
ehrpwm2: pwm@200 {
compatible = "ti,am3352-ehrpwm",
"ti,am33xx-ehrpwm";

4
arch/arm/boot/dts/am437x-l4.dtsi
View file

@ -2388,7 +2388,7 @@ dwc3_1: omap_dwc3@0 {
ranges = <0 0 0x20000>;
usb1: usb@10000 {
compatible = "synopsys,dwc3";
compatible = "snps,dwc3";
reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
@ -2468,7 +2468,7 @@ dwc3_2: omap_dwc3@0 {
ranges = <0 0 0x20000>;
usb2: usb@10000 {
compatible = "synopsys,dwc3";
compatible = "snps,dwc3";
reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,

2
arch/arm/boot/dts/armada-375.dtsi
View file

@ -426,7 +426,7 @@ usb1: usb@54000 {
status = "disabled";
};
usb2: usb3@58000 {
usb2: usb@58000 {
compatible = "marvell,armada-375-xhci";
reg = <0x58000 0x20000>,<0x5b880 0x80>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;

112
arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts Normal file
View file

@ -0,0 +1,112 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Device Tree file for Marvell Armada 382 reference board
* (RD-AC3X-48G4X2XL)
*
* Copyright (C) 2020 Allied Telesis Labs
*/
/dts-v1/;
#include "armada-385.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Marvell Armada 382 RD-AC3X";
compatible = "marvell,rd-ac3x-48g4x2xl", "marvell,rd-ac3x",
"marvell,armada385", "marvell,armada380";
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
ethernet0 = &eth1;
};
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512MB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "okay";
eeprom@53{
compatible = "atmel,24c64";
reg = <0x53>;
};
/* CPLD device present at 0x3c. Function unknown */
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&eth1 {
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
&mdio {
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
phy0: ethernet-phy@0 {
reg = <0>;
};
};
&pciec {
status = "okay";
};
&pcie1 {
/* Port 0, Lane 0 */
status = "okay";
};
&nand_controller {
status = "okay";
nand@0 {
reg = <0>;
label = "pxa3xx_nand-0";
nand-rb = <0>;
nand-on-flash-bbt;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x00000000 0x00500000>;
label = "u-boot";
};
partition@500000{
reg = <0x00500000 0x00400000>;
label = "u-boot env";
};
partition@900000{
reg = <0x00900000 0x3F700000>;
label = "user";
};
};
};
};
&refclk {
clock-frequency = <200000000>;
};

179
arch/arm/boot/dts/armada-385-turris-omnia.dts
View file

@ -12,6 +12,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include "armada-385.dtsi"
/ {
@ -82,6 +83,32 @@ pcie@3,0 {
};
};
};
sfp: sfp {
compatible = "sff,sfp";
i2c-bus = <&sfp_i2c>;
tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>;
tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>;
rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>;
los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>;
maximum-power-milliwatt = <3000>;
/*
* For now this has to be enabled at boot time by U-Boot when
* a SFP module is present. Read more in the comment in the
* eth2 node below.
*/
status = "disabled";
};
};
&bm {
status = "okay";
};
&bm_bppi {
status = "okay";
};
/* Connected to 88E6176 switch, port 6 */
@ -90,6 +117,9 @@ &eth0 {
pinctrl-0 = <&ge0_rgmii_pins>;
status = "okay";
phy-mode = "rgmii";
buffer-manager = <&bm>;
bm,pool-long = <0>;
bm,pool-short = <3>;
fixed-link {
speed = <1000>;
@ -103,6 +133,9 @@ &eth1 {
pinctrl-0 = <&ge1_rgmii_pins>;
status = "okay";
phy-mode = "rgmii";
buffer-manager = <&bm>;
bm,pool-long = <1>;
bm,pool-short = <3>;
fixed-link {
speed = <1000>;
@ -112,9 +145,23 @@ fixed-link {
/* WAN port */
&eth2 {
/*
* eth2 is connected via a multiplexor to both the SFP cage and to
* ethernet-phy@1. The multiplexor switches the signal to SFP cage when
* a SFP module is present, as determined by the mode-def0 GPIO.
*
* Until kernel supports this configuration properly, in case SFP module
* is present, U-Boot has to enable the sfp node above, remove phy
* handle and add managed = "in-band-status" property.
*/
status = "okay";
phy-mode = "sgmii";
phy = <&phy1>;
phy-handle = <&phy1>;
phys = <&comphy5 2>;
sfp = <&sfp>;
buffer-manager = <&bm>;
bm,pool-long = <2>;
bm,pool-short = <3>;
};
&i2c0 {
@ -127,7 +174,6 @@ i2cmux@70 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
status = "okay";
i2c@0 {
#address-cells = <1>;
@ -135,7 +181,115 @@ i2c@0 {
reg = <0>;
/* STM32F0 command interface at address 0x2a */
/* leds device (in STM32F0) at address 0x2b */
led-controller@2b {
compatible = "cznic,turris-omnia-leds";
reg = <0x2b>;
#address-cells = <1>;
#size-cells = <0>;
/*
* LEDs are controlled by MCU (STM32F0) at
* address 0x2b.
*
* The driver does not support HW control mode
* for the LEDs yet. Disable the LEDs for now.
*
* Also LED functions are not stable yet:
* - there are 3 LEDs connected via MCU to PCIe
* ports. One of these ports supports mSATA.
* There is no mSATA nor PCIe function.
* For now we use LED_FUNCTION_WLAN, since
* in most cases users have wifi cards in
* these slots
* - there are 2 LEDs dedicated for user: A and
* B. Again there is no such function defined.
* For now we use LED_FUNCTION_INDICATOR
*/
status = "disabled";
multi-led@0 {
reg = <0x0>;
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <2>;
};
multi-led@1 {
reg = <0x1>;
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <1>;
};
multi-led@2 {
reg = <0x2>;
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_WLAN;
function-enumerator = <3>;
};
multi-led@3 {
reg = <0x3>;
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_WLAN;
function-enumerator = <2>;
};
multi-led@4 {
reg = <0x4>;
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_WLAN;
function-enumerator = <1>;
};
multi-led@5 {
reg = <0x5>;
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_WAN;
};
multi-led@6 {
reg = <0x6>;
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_LAN;
function-enumerator = <4>;
};
multi-led@7 {
reg = <0x7>;
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_LAN;
function-enumerator = <3>;
};
multi-led@8 {
reg = <0x8>;
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_LAN;
function-enumerator = <2>;
};
multi-led@9 {
reg = <0x9>;
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_LAN;
function-enumerator = <1>;
};
multi-led@a {
reg = <0xa>;
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_LAN;
function-enumerator = <0>;
};
multi-led@b {
reg = <0xb>;
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_POWER;
};
};
eeprom@54 {
compatible = "atmel,24c64";
@ -177,7 +331,7 @@ i2c@3 {
/* routed to PCIe2 connector (CN62A) */
};
i2c@4 {
sfp_i2c: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
@ -232,9 +386,8 @@ &mdio {
pinctrl-0 = <&mdio_pins>;
status = "okay";
phy1: phy@1 {
status = "okay";
compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
/* irq is connected to &pcawan pin 7 */
@ -242,13 +395,18 @@ phy1: phy@1 {
/* Switch MV88E6176 at address 0x10 */
switch@10 {
pinctrl-names = "default";
pinctrl-0 = <&swint_pins>;
compatible = "marvell,mv88e6085";
#address-cells = <1>;
#size-cells = <0>;
dsa,member = <0 0>;
dsa,member = <0 0>;
reg = <0x10>;
interrupt-parent = <&gpio1>;
interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
ports {
#address-cells = <1>;
#size-cells = <0>;
@ -301,6 +459,11 @@ pcawan_pins: pcawan-pins {
marvell,function = "gpio";
};
swint_pins: swint-pins {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
spi0cs0_pins: spi0cs0-pins {
marvell,pins = "mpp25";
marvell,function = "spi0";

4
arch/arm/boot/dts/armada-388-clearfog.dts
View file

@ -73,13 +73,13 @@ &expander0 {
* 14-SFP_TX_DISABLE
* 15-SFP_MOD_DEF0
*/
pcie2_0_clkreq {
pcie2-0-clkreq-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_LOW>;
input;
line-name = "pcie2.0-clkreq";
};
pcie2_0_w_disable {
pcie2-0-w-disable-hog {
gpio-hog;
gpios = <7 GPIO_ACTIVE_LOW>;
output-low;

10
arch/arm/boot/dts/armada-388-clearfog.dtsi
View file

@ -141,31 +141,31 @@ expander0: gpio-expander@20 {
#gpio-cells = <2>;
reg = <0x20>;
pcie1_0_clkreq {
pcie1-0-clkreq-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_LOW>;
input;
line-name = "pcie1.0-clkreq";
};
pcie1_0_w_disable {
pcie1-0-w-disable-hog {
gpio-hog;
gpios = <3 GPIO_ACTIVE_LOW>;
output-low;
line-name = "pcie1.0-w-disable";
};
usb3_ilimit {
usb3-ilimit-hog {
gpio-hog;
gpios = <5 GPIO_ACTIVE_LOW>;
input;
line-name = "usb3-current-limit";
};
usb3_power {
usb3-power-hog {
gpio-hog;
gpios = <6 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "usb3-power";
};
m2_devslp {
m2-devslp-hog {
gpio-hog;
gpios = <11 GPIO_ACTIVE_HIGH>;
output-low;

6
arch/arm/boot/dts/armada-388-helios4.dts
View file

@ -166,19 +166,19 @@ expander0: gpio-expander@20 {
interrupt-controller;
#interrupt-cells = <2>;
board_rev_bit_0 {
board-rev-bit-0-hog {
gpio-hog;
gpios = <0 GPIO_ACTIVE_LOW>;
input;
line-name = "board-rev-0";
};
board_rev_bit_1 {
board-rev-bit-1-hog {
gpio-hog;
gpios = <1 GPIO_ACTIVE_LOW>;
input;
line-name = "board-rev-1";
};
usb3_ilimit {
usb3-ilimit-hog {
gpio-hog;
gpios = <5 GPIO_ACTIVE_HIGH>;
input;

12
arch/arm/boot/dts/armada-xp-98dx3236.dtsi
View file

@ -264,11 +264,8 @@ refclk: oscillator {
&i2c0 {
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
reg = <0x11000 0x100>;
};
&i2c1 {
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
reg = <0x11100 0x100>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
};
&mpic {
@ -324,6 +321,11 @@ spi0_pins: spi0-pins {
"mpp2", "mpp3";
marvell,function = "spi0";
};
i2c0_pins: i2c-pins-0 {
marvell,pins = "mpp14", "mpp15";
marvell,function = "i2c0";
};
};
&spi0 {

43
arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts Normal file
View file

@ -0,0 +1,43 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for MikroTik CRS305-1G-4S+ Bit board
*
* Copyright (C) 2020 Sartura Ltd.
* Author: Luka Kovacic <luka.kovacic@sartura.hr>
*/
#include "armada-xp-crs305-1g-4s.dtsi"
/ {
model = "MikroTik CRS305-1G-4S+ Bit";
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
m25p,fast-read;
partition@u-boot {
reg = <0x00000000 0x001f0000>;
label = "u-boot";
};
partition@u-boot-env {
reg = <0x001f0000 0x00010000>;
label = "u-boot-env";
};
partition@ubi1 {
reg = <0x00200000 0x03f00000>;
label = "ubi1";
};
partition@ubi2 {
reg = <0x04100000 0x03f00000>;
label = "ubi2";
};
};
};

17
arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts Normal file
View file

@ -0,0 +1,17 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for MikroTik CRS305-1G-4S+ board
*
* Copyright (C) 2020 Sartura Ltd.
* Author: Luka Kovacic <luka.kovacic@sartura.hr>
*/
#include "armada-xp-crs305-1g-4s.dtsi"
/ {
model = "MikroTik CRS305-1G-4S+";
};
&spi0 {
status = "okay";
};

104
arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi Normal file
View file

@ -0,0 +1,104 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for CRS305-1G-4S board
*
* Copyright (C) 2016 Allied Telesis Labs
* Copyright (C) 2020 Sartura Ltd.
*
* Based on armada-xp-db.dts
*
* Note: this Device Tree assumes that the bootloader has remapped the
* internal registers to 0xf1000000 (instead of the default
* 0xd0000000). The 0xf1000000 is the default used by the recent,
* DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
* boards were delivered with an older version of the bootloader that
* left internal registers mapped at 0xd0000000. If you are in this
* situation, you should either update your bootloader (preferred
* solution) or the below Device Tree should be adjusted.
*/
/dts-v1/;
#include "armada-xp-98dx3236.dtsi"
/ {
model = "CRS305-1G-4S+";
compatible = "mikrotik,crs305-1g-4s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
device_type = "memory";
reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
};
};
&L2 {
arm,parity-enable;
marvell,ecc-enable;
};
&devbus_bootcs {
status = "okay";
/* Device Bus parameters are required */
/* Read parameters */
devbus,bus-width = <16>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;
devbus,acc-next-ps = <248000>;
devbus,rd-setup-ps = <0>;
devbus,rd-hold-ps = <0>;
/* Write parameters */
devbus,sync-enable = <0>;
devbus,wr-high-ps = <60000>;
devbus,wr-low-ps = <60000>;
devbus,ale-wr-ps = <60000>;
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&i2c0 {
clock-frequency = <100000>;
status = "okay";
};
&usb0 {
status = "okay";
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
m25p,fast-read;
partition@u-boot {
reg = <0x00000000 0x001f0000>;
label = "u-boot";
};
partition@u-boot-env {
reg = <0x001f0000 0x00010000>;
label = "u-boot-env";
};
partition@ubi1 {
reg = <0x00200000 0x00e00000>;
label = "ubi1";
};
};
};

43
arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts Normal file
View file

@ -0,0 +1,43 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for MikroTik CRS326-24G-2S+ Bit board
*
* Copyright (C) 2020 Sartura Ltd.
* Author: Luka Kovacic <luka.kovacic@sartura.hr>
*/
#include "armada-xp-crs326-24g-2s.dtsi"
/ {
model = "MikroTik CRS326-24G-2S+ Bit";
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
m25p,fast-read;
partition@u-boot {
reg = <0x00000000 0x001f0000>;
label = "u-boot";
};
partition@u-boot-env {
reg = <0x001f0000 0x00010000>;
label = "u-boot-env";
};
partition@ubi1 {
reg = <0x00200000 0x03f00000>;
label = "ubi1";
};
partition@ubi2 {
reg = <0x04100000 0x03f00000>;
label = "ubi2";
};
};
};

17
arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts Normal file
View file

@ -0,0 +1,17 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for MikroTik CRS326-24G-2S+ board
*
* Copyright (C) 2020 Sartura Ltd.
* Author: Luka Kovacic <luka.kovacic@sartura.hr>
*/
#include "armada-xp-crs326-24g-2s.dtsi"
/ {
model = "MikroTik CRS326-24G-2S+";
};
&spi0 {
status = "okay";
};

104
arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi Normal file
View file

@ -0,0 +1,104 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for CRS326-24G-2S board
*
* Copyright (C) 2016 Allied Telesis Labs
* Copyright (C) 2020 Sartura Ltd.
*
* Based on armada-xp-db.dts
*
* Note: this Device Tree assumes that the bootloader has remapped the
* internal registers to 0xf1000000 (instead of the default
* 0xd0000000). The 0xf1000000 is the default used by the recent,
* DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
* boards were delivered with an older version of the bootloader that
* left internal registers mapped at 0xd0000000. If you are in this
* situation, you should either update your bootloader (preferred
* solution) or the below Device Tree should be adjusted.
*/
/dts-v1/;
#include "armada-xp-98dx3236.dtsi"
/ {
model = "CRS326-24G-2S+";
compatible = "mikrotik,crs326-24g-2s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
device_type = "memory";
reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
};
};
&L2 {
arm,parity-enable;
marvell,ecc-enable;
};
&devbus_bootcs {
status = "okay";
/* Device Bus parameters are required */
/* Read parameters */
devbus,bus-width = <16>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;
devbus,acc-next-ps = <248000>;
devbus,rd-setup-ps = <0>;
devbus,rd-hold-ps = <0>;
/* Write parameters */
devbus,sync-enable = <0>;
devbus,wr-high-ps = <60000>;
devbus,wr-low-ps = <60000>;
devbus,ale-wr-ps = <60000>;
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&i2c0 {
clock-frequency = <100000>;
status = "okay";
};
&usb0 {
status = "okay";
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
m25p,fast-read;
partition@u-boot {
reg = <0x00000000 0x001f0000>;
label = "u-boot";
};
partition@u-boot-env {
reg = <0x001f0000 0x00010000>;
label = "u-boot-env";
};
partition@ubi1 {
reg = <0x00200000 0x00e00000>;
label = "ubi1";
};
};
};

43
arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts Normal file
View file

@ -0,0 +1,43 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for MikroTik CRS328-4C-20S-4S+ Bit board
*
* Copyright (C) 2020 Sartura Ltd.
* Author: Luka Kovacic <luka.kovacic@sartura.hr>
*/
#include "armada-xp-crs328-4c-20s-4s.dtsi"
/ {
model = "MikroTik CRS328-4C-20S-4S+ Bit";
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
m25p,fast-read;
partition@u-boot {
reg = <0x00000000 0x001f0000>;
label = "u-boot";
};
partition@u-boot-env {
reg = <0x001f0000 0x00010000>;
label = "u-boot-env";
};
partition@ubi1 {
reg = <0x00200000 0x03f00000>;
label = "ubi1";
};
partition@ubi2 {
reg = <0x04100000 0x03f00000>;
label = "ubi2";
};
};
};

17
arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts Normal file
View file

@ -0,0 +1,17 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for MikroTik CRS328-4C-20S-4S+ board
*
* Copyright (C) 2020 Sartura Ltd.
* Author: Luka Kovacic <luka.kovacic@sartura.hr>
*/
#include "armada-xp-crs328-4c-20s-4s.dtsi"
/ {
model = "MikroTik CRS328-4C-20S-4S+";
};
&spi0 {
status = "okay";
};

104
arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi Normal file
View file

@ -0,0 +1,104 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for CRS328-4C-20S-4S+ board
*
* Copyright (C) 2016 Allied Telesis Labs
* Copyright (C) 2020 Sartura Ltd.
*
* Based on armada-xp-db.dts
*
* Note: this Device Tree assumes that the bootloader has remapped the
* internal registers to 0xf1000000 (instead of the default
* 0xd0000000). The 0xf1000000 is the default used by the recent,
* DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
* boards were delivered with an older version of the bootloader that
* left internal registers mapped at 0xd0000000. If you are in this
* situation, you should either update your bootloader (preferred
* solution) or the below Device Tree should be adjusted.
*/
/dts-v1/;
#include "armada-xp-98dx3236.dtsi"
/ {
model = "CRS328-4C-20S-4S+";
compatible = "mikrotik,crs328-4c-20s-4s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
device_type = "memory";
reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
};
};
&L2 {
arm,parity-enable;
marvell,ecc-enable;
};
&devbus_bootcs {
status = "okay";
/* Device Bus parameters are required */
/* Read parameters */
devbus,bus-width = <16>;
devbus,turn-off-ps = <60000>;
devbus,badr-skew-ps = <0>;
devbus,acc-first-ps = <124000>;
devbus,acc-next-ps = <248000>;
devbus,rd-setup-ps = <0>;
devbus,rd-hold-ps = <0>;
/* Write parameters */
devbus,sync-enable = <0>;
devbus,wr-high-ps = <60000>;
devbus,wr-low-ps = <60000>;
devbus,ale-wr-ps = <60000>;
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&i2c0 {
clock-frequency = <100000>;
status = "okay";
};
&usb0 {
status = "okay";
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
m25p,fast-read;
partition@u-boot {
reg = <0x00000000 0x001f0000>;
label = "u-boot";
};
partition@u-boot-env {
reg = <0x001f0000 0x00010000>;
label = "u-boot-env";
};
partition@ubi1 {
reg = <0x00200000 0x00e00000>;
label = "ubi1";
};
};
};

20
arch/arm/boot/dts/aspeed-ast2600-evb.dts
View file

@ -23,6 +23,15 @@ memory@80000000 {
};
};
&mdio0 {
status = "okay";
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
&mdio1 {
status = "okay";
@ -50,6 +59,17 @@ ethphy3: ethernet-phy@0 {
};
};
&mac0 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <&ethphy0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii1_default>;
};
&mac1 {
status = "okay";

77
arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
View file

@ -13,6 +13,21 @@ / {
memory@80000000 {
reg = <0x80000000 0x20000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
video_engine_memory: jpegbuffer {
size = <0x02000000>; /* 32M */
alignment = <0x01000000>;
compatible = "shared-dma-pool";
reusable;
};
};
aliases {
serial0 = &uart1;
serial4 = &uart5;
@ -82,6 +97,50 @@ &pinctrl_adc3_default
&pinctrl_adc4_default>;
};
&gpio {
status = "okay";
gpio-line-names =
/*A0-A7*/ "","","FAULT_LED","CHASSIS_ID_LED","","","","",
/*B0-B7*/ "","","","","","","","",
/*C0-C7*/ "CHASSIS_ID_BTN","INTRUDER","AC_LOSS","","","","","",
/*D0-D7*/ "HDT_DBREQ","LOCAL_SPI_ROM_SEL","FPGA_SPI_ROM_SEL","JTAG_MUX_S",
"JTAG_MUX_OE","HDT_SEL","ASERT_WARM_RST_BTN","FPGA_RSVD",
/*E0-E7*/ "","","MON_P0_PWR_BTN","MON_P0_RST_BTN","MON_P0_NMI_BTN",
"MON_P0_PWR_GOOD","MON_PWROK","MON_RESET",
/*F0-F7*/ "MON_P0_PROCHOT","MON_P1_PROCHOT","MON_P0_THERMTRIP",
"MON_P1_THERMTRIP","P0_PRESENT","P1_PRESENT","MON_ATX_PWR_OK","",
/*G0-G7*/ "BRD_REV_ID_3","BRD_REV_ID_2","BRD_REV_ID_1","BRD_REV_ID_0",
"P0_APML_ALERT","P1_APML_ALERT","FPGA ALERT","",
/*H0-H7*/ "BRD_ID_0","BRD_ID_1","BRD_ID_2","BRD_ID_3",
"PCIE_DISCONNECTED","USB_DISCONNECTED","SPARE_0","SPARE_1",
/*I0-I7*/ "","","","","","","","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
/*L0-L7*/ "","","","","","","","",
/*M0-M7*/ "ASSERT_PWR_BTN","ASSERT_RST_BTN","ASSERT_NMI_BTN",
"ASSERT_LOCAL_LOCK","ASSERT_P0_PROCHOT","ASSERT_P1_PROCHOT",
"ASSERT_CLR_CMOS","ASSERT_BMC_READY",
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "","","","","","","","",
/*P0-P7*/ "P0_VDD_CORE_RUN_VRHOT","P0_VDD_SOC_RUN_VRHOT",
"P0_VDD_MEM_ABCD_SUS_VRHOT","P0_VDD_MEM_EFGH_SUS_VRHOT",
"P1_VDD_CORE_RUN_VRHOT","P1_VDD_SOC_RUN_VRHOT",
"P1_VDD_MEM_ABCD_SUS_VRHOT","P1_VDD_MEM_EFGH_SUS_VRHOT",
/*Q0-Q7*/ "","","","","","","","",
/*R0-R7*/ "","","","","","","","",
/*S0-S7*/ "","","","","","","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "","","","","","","","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","","","","","","","",
/*Y0-Y7*/ "","","","","","","","",
/*Z0-Z7*/ "","","","","","","","",
/*AA0-AA7*/ "","SENSOR THERM","","","","","","",
/*AB0-AB7*/ "","","","","","","","",
/*AC0-AC7*/ "","","","","","","","";
};
//APML for P0
&i2c0 {
status = "okay";
@ -139,17 +198,22 @@ lm75a@4f {
&kcs1 {
status = "okay";
kcs_addr = <0x60>;
aspeed,lpc-io-reg = <0x60>;
};
&kcs2 {
status = "okay";
kcs_addr = <0x62>;
aspeed,lpc-io-reg = <0x62>;
};
&kcs3 {
status = "okay";
aspeed,lpc-io-reg = <0xCA2>;
};
&kcs4 {
status = "okay";
kcs_addr = <0x97DE>;
aspeed,lpc-io-reg = <0x97DE>;
};
&lpc_snoop {
@ -215,5 +279,12 @@ fan@7 {
};
};
&video {
status = "okay";
memory-region = <&video_engine_memory>;
};
&vhub {
status = "okay";
};

924
arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts Normal file
View file

@ -0,0 +1,924 @@
// SPDX-License-Identifier: GPL-2.0+
// Copyright (C) 2020 Bytedance.
/dts-v1/;
#include "aspeed-g5.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
#include <dt-bindings/i2c/i2c.h>
#include <dt-bindings/leds/leds-pca955x.h>
/ {
model = "Bytedance G220A BMC";
compatible = "bytedance,g220a-bmc", "aspeed,ast2500";
aliases {
serial4 = &uart5;
i2c14 = &channel_3_0;
i2c15 = &channel_3_1;
i2c16 = &channel_3_2;
i2c17 = &channel_3_3;
i2c18 = &channel_6_0;
i2c19 = &channel_6_1;
i2c20 = &channel_6_2;
i2c21 = &channel_6_3;
i2c22 = &channel_6_4;
i2c23 = &channel_6_5;
i2c24 = &channel_6_6;
i2c25 = &channel_6_7;
i2c26 = &channel_6_8;
i2c27 = &channel_6_9;
i2c28 = &channel_6_10;
i2c29 = &channel_6_11;
i2c30 = &channel_6_12;
i2c31 = &channel_6_13;
i2c32 = &channel_6_14;
i2c33 = &channel_6_15;
i2c34 = &channel_6_16;
i2c35 = &channel_6_17;
i2c36 = &channel_6_18;
i2c37 = &channel_6_19;
i2c38 = &channel_6_20;
i2c39 = &channel_6_21;
i2c40 = &channel_6_22;
i2c41 = &channel_6_23;
i2c42 = &channel_6_24;
i2c43 = &channel_6_25;
i2c44 = &channel_10_0;
i2c45 = &channel_10_1;
i2c46 = &channel_10_2;
i2c47 = &channel_10_3;
i2c48 = &channel_10_4;
i2c49 = &channel_10_5;
i2c50 = &channel_10_6;
i2c51 = &channel_10_7;
};
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlyprintk";
};
memory@80000000 {
reg = <0x80000000 0x40000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
vga_memory: framebuffer@bc000000 {
no-map;
reg = <0xbc000000 0x04000000>; /* 64M */
};
video_engine_memory: jpegbuffer {
size = <0x02000000>; /* 32M */
alignment = <0x01000000>;
compatible = "shared-dma-pool";
reusable;
};
};
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
};
leds {
compatible = "gpio-leds";
bmc_alive {
label = "bmc_alive";
gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
led-pattern = <1000 1000>;
};
};
gpio-keys {
compatible = "gpio-keys";
burn-in-signal {
label = "burn-in";
gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(R, 5)>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <1000>;
rear-riser1-presence {
label = "rear-riser1-presence";
gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
linux,code = <1>;
};
alrt-pvddq-cpu0 {
label = "alrt-pvddq-cpu0";
gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
linux,code = <2>;
};
rear-riser0-presence {
label = "rear-riser0-presence";
gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
linux,code = <3>;
};
fault-pvddq-cpu0 {
label = "fault-pvddq-cpu0";
gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
linux,code = <4>;
};
alrt-pvddq-cpu1 {
label = "alrt-pvddq-cpu1";
gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
linux,code = <5>;
};
fault-pvddq-cpu1 {
label = "alrt-pvddq-cpu1";
gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
linux,code = <6>;
};
fault-pvccin-cpu1 {
label = "fault-pvccin-cpuq";
gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
linux,code = <7>;
};
bmc-rom0-wp {
label = "bmc-rom0-wp";
gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
linux,code = <8>;
};
bmc-rom1-wp {
label = "bmc-rom1-wp";
gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
linux,code = <9>;
};
fan0-presence {
label = "fan0-presence";
gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
linux,code = <10>;
};
fan1-presence {
label = "fan1-presence";
gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
linux,code = <11>;
};
fan2-presence {
label = "fan2-presence";
gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
linux,code = <12>;
};
fan3-presence {
label = "fan3-presence";
gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
linux,code = <13>;
};
fan4-presence {
label = "fan4-presence";
gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
linux,code = <14>;
};
fan5-presence {
label = "fan5-presence";
gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
linux,code = <15>;
};
front-bp1-presence {
label = "front-bp1-presence";
gpios = <&pca1 8 GPIO_ACTIVE_LOW>;
linux,code = <16>;
};
rear-bp-presence {
label = "rear-bp-presence";
gpios = <&pca1 9 GPIO_ACTIVE_LOW>;
linux,code = <17>;
};
fault-pvccin-cpu0 {
label = "fault-pvccin-cpu0";
gpios = <&pca1 10 GPIO_ACTIVE_LOW>;
linux,code = <18>;
};
alrt-p1v05-pvcc {
label = "alrt-p1v05-pvcc1";
gpios = <&pca1 11 GPIO_ACTIVE_LOW>;
linux,code = <19>;
};
fault-p1v05-pvccio {
label = "alrt-p1v05-pvcc1";
gpios = <&pca1 12 GPIO_ACTIVE_LOW>;
linux,code = <20>;
};
alrt-p1v8-pvccio {
label = "alrt-p1v8-pvccio";
gpios = <&pca1 13 GPIO_ACTIVE_LOW>;
linux,code = <21>;
};
fault-p1v8-pvccio {
label = "fault-p1v8-pvccio";
gpios = <&pca1 14 GPIO_ACTIVE_LOW>;
linux,code = <22>;
};
front-bp0-presence {
label = "front-bp0-presence";
gpios = <&pca1 15 GPIO_ACTIVE_LOW>;
linux,code = <23>;
};
};
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
label = "bmc";
m25p,fast-read;
spi-max-frequency = <50000000>;
#include "openbmc-flash-layout-64.dtsi"
};
};
&spi1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
flash@0 {
status = "okay";
m25p,fast-read;
label = "bios";
spi-max-frequency = <100000000>;
};
};
&adc {
status = "okay";
};
&gpio {
status = "okay";
gpio-line-names =
/*A0-A7*/ "SMRST_OCP_N","MAC2_LINK","BMC_CPLD_SMB_RST_R_N","BMC_CPLD_GPIO0",
"","","","",
/*B0-B7*/ "BMC_INIT_R_OK","FM_BOARD_REV_ID2","FM_PROJECT_ID7","FAULT_P12V_STBY_N",
"","CPU0_PROCHOT_LVT3_N","","BIOS_LOAD_DEFAULT_R_N",
/*C0-C7*/ "","","","","","","","",
/*D0-D7*/ "","","","","","","","",
/*E0-E7*/ "FM_PROJECT_ID0","FM_PROJECT_ID1","FM_PROJECT_ID2","FM_PROJECT_ID3",
"FM_PROJECT_ID4","FM_PROJECT_ID5","","",
/*F0-F7*/ "PSU0_PRSNT_N","PSU1_PRSNT_N","","FAULT_P12V_NVME_N",
"BIOS_DEBUG_MODE_R_N","DISABLE_CPU_DDR_R_SPD","COOLING_STRATEGY",
"PCH_GLB_RST_N",
/*G0-G7*/ "P12V_PMBUS_ALERT_N","CPLD_ALERT_N","BMC_RELOAD_N",
"P12V_PVDDQ_PMBUS_ALERT_N","BMC_JTAG_TCK_MUX_R_SEL","","NMI_OUT",
"NMI_BUTTON",
/*H0-H7*/ "BMC_CPLD_JTAG_TDI","BMC_CPLD_JTAG_TDO","BMC_CPLD_JTAG_TCK",
"BMC_CPLD_JTAG_TMS","FM_PROJECT_ID6","FM_BOARD_REV_ID0",
"PCA9546_U70_RST_N","IRQ_SML0_ALERT_N",
/*I0-I7*/ "FAULT_FRONT_RISER_P12V_N","FAULT_OCP_P12V_N","FM_BMC_PCH_SCI_R_N",
"","","","","",
/*J0-J7*/ "FM_CPU0_SKTOCC_N","FM_CPU1_SKTOCC_N","FM_CPU1_DISABLE_COD_N",
"","","","","",
/*K0-K7*/ "","","","","","","","",
/*L0-L7*/ "P12V_FAULT_N","PWRGD_P12V_PCIE_RISER","","LEAKAGE_DETECT_INPUT_N",
"","IRQ_SML1_PMBUS_ALERT_N","","",
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "","","","","","","","",
/*P0-P7*/ "","","","","","","","",
/*Q0-Q7*/ "","","","","","","FM_PCH_THERMTRIP_N","CHASSIS_INTRUSION",
/*R0-R7*/ "","PVCCIN_CPU1_SMBALERT_N","BMC_PREQ_R_N","FAULT_P12V_PCIE_RISER_N",
"ALT_P12V_PCIE_RISER_N","BURN_BOARD_N","PVCCIN_CPU0_SMBALERT_N","",
/*S0-S7*/ "BMC_PRDY_N","SIO_POWER_GOOD","FM_BMC_PWR_DEBUG_R_N",
"FM_BMC_XDP_DEBUG_EN","","STRAP_BMC_BATTERY_GPIOS5","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "","","","","","","","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","","","","","","","",
/*Y0-Y7*/ "","PWRGD_PSU0_PWROK","CPU1_PROCHOT_LVT3_N","IRQ_BMC_PCH_SMI_LPC_N",
"","","","",
/*Z0-Z7*/ "XDP_PRSNT_N","BMC_XDP_SYS_PWROK","BMC_XDP_JTAG_SEL",
"PCH_BMC_SMI_ACTIVE_R_N","","","","",
/*AA0-AA7*/ "PWRGD_P12V_STBY_OCP","PS_PWROK","RST_PLTRST_BMC_R_N","HDA_SDO_R",
"FM_SLPS4_R_N","PWRGD_PSU1_PWROK","POWER_BUTTON","POWER_OUT",
/*AB0-AB7*/ "","RESET_OUT","SPI_BIOS_MODE_SELECT","POST_COMPLETE","","","","",
/*AC0-AC7*/ "","","","","","","","CPLD_PLTRST_B_N";
};
&kcs3 {
aspeed,lpc-io-reg = <0xCA2>;
status = "okay";
};
&kcs4 {
aspeed,lpc-io-reg = <0xCA4>;
status = "okay";
};
&lpc_snoop {
snoop-ports = <0x80>;
status = "okay";
};
&uart1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd1_default
&pinctrl_rxd1_default
&pinctrl_nrts1_default
&pinctrl_ndtr1_default
&pinctrl_ndsr1_default
&pinctrl_ncts1_default
&pinctrl_ndcd1_default
&pinctrl_nri1_default>;
};
&uart2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd2_default
&pinctrl_rxd2_default
&pinctrl_nrts2_default
&pinctrl_ndtr2_default
&pinctrl_ndsr2_default
&pinctrl_ncts2_default
&pinctrl_ndcd2_default
&pinctrl_nri2_default>;
};
&uart3 {
status = "okay";
};
&uart4 {
status = "okay";
};
&uart5 {
status = "okay";
};
&mac0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
<&syscon ASPEED_CLK_MAC1RCLK>;
clock-names = "MACCLK", "RCLK";
use-ncsi;
};
&mac1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
&i2c0 {
status = "okay";
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
i2c-switch@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
channel_3_0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
channel_3_1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
channel_3_2: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
channel_3_3: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
};
&i2c4 {
status = "okay";
};
&i2c5 {
status = "okay";
};
&i2c6 {
status = "okay";
i2c-switch@72 {
compatible = "nxp,pca9548";
reg = <0x72>;
#address-cells = <1>;
#size-cells = <0>;
channel_6_0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
channel_6_1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
channel_6_2: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
channel_6_3: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
channel_6_4: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
channel_6_5: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
channel_6_6: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
channel_6_7: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
i2c-switch@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
channel_6_8: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
i2c-switch@71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
#size-cells = <0>;
channel_6_12: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
channel_6_13: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
channel_6_14: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
channel_6_15: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
};
channel_6_9: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
i2c-switch@71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
#size-cells = <0>;
channel_6_16: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
channel_6_17: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
channel_6_18: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
channel_6_19: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
};
channel_6_10: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
i2c-switch@71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
#size-cells = <0>;
channel_6_20: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
channel_6_21: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
channel_6_22: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
channel_6_23: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
};
channel_6_11: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
i2c-switch@71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
#size-cells = <0>;
channel_6_24: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
channel_6_25: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
};
};
};
&i2c7 {
status = "okay";
};
&i2c8 {
status = "okay";
pca0:pca9555@24 {
compatible = "nxp,pca9555";
reg = <0x24>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio@1 {
reg = <1>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@8 {
reg = <8>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@9 {
reg = <9>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@10 {
reg = <10>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@11 {
reg = <11>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@12 {
reg = <12>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@13 {
reg = <13>;
type = <PCA955X_TYPE_GPIO>;
};
};
pca1:pca9555@25 {
compatible = "nxp,pca9555";
reg = <0x25>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio@0 {
reg = <0>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@1 {
reg = <1>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@2 {
reg = <2>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@3 {
reg = <3>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@4 {
reg = <4>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@5 {
reg = <5>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@6 {
reg = <6>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@7 {
reg = <7>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@8 {
reg = <8>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@9 {
reg = <9>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@10 {
reg = <10>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@11 {
reg = <11>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@12 {
reg = <12>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@13 {
reg = <13>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@14 {
reg = <14>;
type = <PCA955X_TYPE_GPIO>;
};
gpio@15 {
reg = <15>;
type = <PCA955X_TYPE_GPIO>;
};
};
};
&i2c9 {
status = "okay";
};
&i2c10 {
status = "okay";
i2c-switch@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
channel_10_0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
channel_10_1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
channel_10_2: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
channel_10_3: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
i2c-switch@71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
#size-cells = <0>;
channel_10_4: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
channel_10_5: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
channel_10_6: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
channel_10_7: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
};
&i2c11 {
status = "okay";
};
&i2c12 {
status = "okay";
};
&i2c13 {
status = "okay";
};
&pwm_tacho {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
&pinctrl_pwm2_default &pinctrl_pwm3_default
&pinctrl_pwm4_default &pinctrl_pwm5_default>;
fan@0 {
reg = <0x00>;
aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
};
fan@1 {
reg = <0x01>;
aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
};
fan@2 {
reg = <0x02>;
aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
};
fan@3 {
reg = <0x03>;
aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
};
fan@4 {
reg = <0x04>;
aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
};
fan@5 {
reg = <0x05>;
aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
};
};
&gpio {
pin_gpio_i3 {
gpio-hog;
gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>;
output-low;
line-name = "NCSI_BMC_R_SEL";
};
pin_gpio_b6 {
gpio-hog;
gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>;
output-low;
line-name = "EN_NCSI_SWITCH_N";
};
};
&video {
status = "okay";
memory-region = <&video_engine_memory>;
};
&vhub {
status = "okay";
};

57
arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts Normal file
View file

@ -0,0 +1,57 @@
// SPDX-License-Identifier: GPL-2.0+
// Copyright (c) 2020 Facebook Inc.
/dts-v1/;
#include "ast2400-facebook-netbmc-common.dtsi"
/ {
model = "Facebook Galaxy 100 BMC";
compatible = "facebook,galaxy100-bmc", "aspeed,ast2400";
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
};
ast-adc-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc 3>, <&adc 4>, <&adc 8>, <&adc 9>;
};
};
&wdt2 {
status = "okay";
aspeed,reset-type = "system";
};
&fmc {
flash@1 {
status = "okay";
m25p,fast-read;
label = "spi0.1";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
flash1@0 {
reg = <0x0 0x2000000>;
label = "flash1";
};
};
};
};
&i2c9 {
status = "okay";
};
&vhub {
status = "okay";
};
&adc {
status = "okay";
};

888
arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
View file

@ -70,6 +70,162 @@ aliases {
i2c45 = &imux45;
i2c46 = &imux46;
i2c47 = &imux47;
/*
* I2C Switch 24-0071 (channel #0 of 8-0070): 8 channels for
* connecting to left PDB (Power Distribution Board).
*/
i2c48 = &imux48;
i2c49 = &imux49;
i2c50 = &imux50;
i2c51 = &imux51;
i2c52 = &imux52;
i2c53 = &imux53;
i2c54 = &imux54;
i2c55 = &imux55;
/*
* I2C Switch 25-0072 (channel #1 of 8-0070): 8 channels for
* connecting to right PDB (Power Distribution Board).
*/
i2c56 = &imux56;
i2c57 = &imux57;
i2c58 = &imux58;
i2c59 = &imux59;
i2c60 = &imux60;
i2c61 = &imux61;
i2c62 = &imux62;
i2c63 = &imux63;
/*
* I2C Switch 26-0076 (channel #2 of 8-0070): 8 channels for
* connecting to top FCM (Fan Control Module).
*/
i2c64 = &imux64;
i2c65 = &imux65;
i2c66 = &imux66;
i2c67 = &imux67;
i2c68 = &imux68;
i2c69 = &imux69;
i2c70 = &imux70;
i2c71 = &imux71;
/*
* I2C Switch 27-0076 (channel #3 of 8-0070): 8 channels for
* connecting to bottom FCM (Fan Control Module).
*/
i2c72 = &imux72;
i2c73 = &imux73;
i2c74 = &imux74;
i2c75 = &imux75;
i2c76 = &imux76;
i2c77 = &imux77;
i2c78 = &imux78;
i2c79 = &imux79;
/*
* I2C Switch 40-0073 (channel #0 of 11-0070): connecting
* to PIM (Port Interface Module) #1 (1-based).
*/
i2c80 = &imux80;
i2c81 = &imux81;
i2c82 = &imux82;
i2c83 = &imux83;
i2c84 = &imux84;
i2c85 = &imux85;
i2c86 = &imux86;
i2c87 = &imux87;
/*
* I2C Switch 41-0073 (channel #1 of 11-0070): connecting
* to PIM (Port Interface Module) #2 (1-based).
*/
i2c88 = &imux88;
i2c89 = &imux89;
i2c90 = &imux90;
i2c91 = &imux91;
i2c92 = &imux92;
i2c93 = &imux93;
i2c94 = &imux94;
i2c95 = &imux95;
/*
* I2C Switch 42-0073 (channel #2 of 11-0070): connecting
* to PIM (Port Interface Module) #3 (1-based).
*/
i2c96 = &imux96;
i2c97 = &imux97;
i2c98 = &imux98;
i2c99 = &imux99;
i2c100 = &imux100;
i2c101 = &imux101;
i2c102 = &imux102;
i2c103 = &imux103;
/*
* I2C Switch 43-0073 (channel #3 of 11-0070): connecting
* to PIM (Port Interface Module) #4 (1-based).
*/
i2c104 = &imux104;
i2c105 = &imux105;
i2c106 = &imux106;
i2c107 = &imux107;
i2c108 = &imux108;
i2c109 = &imux109;
i2c110 = &imux110;
i2c111 = &imux111;
/*
* I2C Switch 44-0073 (channel #4 of 11-0070): connecting
* to PIM (Port Interface Module) #5 (1-based).
*/
i2c112 = &imux112;
i2c113 = &imux113;
i2c114 = &imux114;
i2c115 = &imux115;
i2c116 = &imux116;
i2c117 = &imux117;
i2c118 = &imux118;
i2c119 = &imux119;
/*
* I2C Switch 45-0073 (channel #5 of 11-0070): connecting
* to PIM (Port Interface Module) #6 (1-based).
*/
i2c120 = &imux120;
i2c121 = &imux121;
i2c122 = &imux122;
i2c123 = &imux123;
i2c124 = &imux124;
i2c125 = &imux125;
i2c126 = &imux126;
i2c127 = &imux127;
/*
* I2C Switch 46-0073 (channel #6 of 11-0070): connecting
* to PIM (Port Interface Module) #7 (1-based).
*/
i2c128 = &imux128;
i2c129 = &imux129;
i2c130 = &imux130;
i2c131 = &imux131;
i2c132 = &imux132;
i2c133 = &imux133;
i2c134 = &imux134;
i2c135 = &imux135;
/*
* I2C Switch 47-0073 (channel #7 of 11-0070): connecting
* to PIM (Port Interface Module) #8 (1-based).
*/
i2c136 = &imux136;
i2c137 = &imux137;
i2c138 = &imux138;
i2c139 = &imux139;
i2c140 = &imux140;
i2c141 = &imux141;
i2c142 = &imux142;
i2c143 = &imux143;
};
chosen {
@ -184,11 +340,16 @@ &i2c1 {
&i2c2 {
status = "okay";
/*
* I2C Switch 2-0070 is connecting to SCM (System Controller
* Module).
*/
i2c-switch@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
imux16: i2c@0 {
#address-cells = <1>;
@ -269,29 +430,270 @@ i2c-switch@70 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
/*
* I2C Switch 8-0070 channel #0: connecting to left PDB
* (Power Distribution Board).
*/
imux24: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
i2c-switch@71 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x71>;
i2c-mux-idle-disconnect;
imux48: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux49: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux50: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux51: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux52: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux53: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux54: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux55: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
/*
* I2C Switch 8-0070 channel #1: connecting to right PDB
* (Power Distribution Board).
*/
imux25: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
i2c-switch@72 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72>;
i2c-mux-idle-disconnect;
imux56: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux57: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux58: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux59: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux60: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux61: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux62: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux63: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
/*
* I2C Switch 8-0070 channel #2: connecting to top FCM
* (Fan Control Module).
*/
imux26: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
i2c-switch@76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x76>;
i2c-mux-idle-disconnect;
imux64: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux65: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux66: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux67: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux68: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux69: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux70: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux71: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
/*
* I2C Switch 8-0070 channel #3: connecting to bottom
* FCM (Fan Control Module).
*/
imux27: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
i2c-switch@76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x76>;
i2c-mux-idle-disconnect;
imux72: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux73: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux74: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux75: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux76: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux77: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux78: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux79: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
imux28: i2c@4 {
@ -323,11 +725,16 @@ imux31: i2c@7 {
&i2c9 {
status = "okay";
/*
* I2C Switch 9-0070 is connecting to MAC/PHY EEPROMs on SMB
* (Switch Main Board).
*/
i2c-switch@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
imux32: i2c@0 {
#address-cells = <1>;
@ -391,53 +798,534 @@ i2c-switch@70 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
/*
* I2C Switch 11-0070 channel #0: connecting to PIM
* (Port Interface Module) #1 (1-based).
*/
imux40: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
i2c-switch@73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x73>;
i2c-mux-idle-disconnect;
imux80: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux81: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux82: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux83: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux84: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux85: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux86: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux87: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
/*
* I2C Switch 11-0070 channel #1: connecting to PIM
* (Port Interface Module) #2 (1-based).
*/
imux41: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
i2c-switch@73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x73>;
i2c-mux-idle-disconnect;
imux88: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux89: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux90: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux91: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux92: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux93: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux94: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux95: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
/*
* I2C Switch 11-0070 channel #2: connecting to PIM
* (Port Interface Module) #3 (1-based).
*/
imux42: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
i2c-switch@73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x73>;
i2c-mux-idle-disconnect;
imux96: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux97: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux98: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux99: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux100: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux101: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux102: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux103: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
/*
* I2C Switch 11-0070 channel #3: connecting to PIM
* (Port Interface Module) #4 (1-based).
*/
imux43: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
i2c-switch@73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x73>;
i2c-mux-idle-disconnect;
imux104: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux105: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux106: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux107: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux108: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux109: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux110: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux111: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
/*
* I2C Switch 11-0070 channel #4: connecting to PIM
* (Port Interface Module) #5 (1-based).
*/
imux44: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
i2c-switch@73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x73>;
i2c-mux-idle-disconnect;
imux112: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux113: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux114: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux115: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux116: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux117: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux118: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux119: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
/*
* I2C Switch 11-0070 channel #5: connecting to PIM
* (Port Interface Module) #6 (1-based).
*/
imux45: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
i2c-switch@73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x73>;
i2c-mux-idle-disconnect;
imux120: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux121: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux122: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux123: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux124: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux125: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux126: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux127: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
/*
* I2C Switch 11-0070 channel #6: connecting to PIM
* (Port Interface Module) #7 (1-based).
*/
imux46: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
i2c-switch@73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x73>;
i2c-mux-idle-disconnect;
imux128: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux129: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux130: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux131: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux132: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux133: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux134: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux135: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
/*
* I2C Switch 11-0070 channel #7: connecting to PIM
* (Port Interface Module) #8 (1-based).
*/
imux47: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
i2c-switch@73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x73>;
i2c-mux-idle-disconnect;
imux136: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
imux137: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
imux138: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
imux139: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
imux140: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
imux141: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
imux142: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
imux143: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
};
};

13
arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
View file

@ -82,11 +82,6 @@ &lpc_ctrl {
status = "okay";
};
&vuart {
// VUART Host Console
status = "okay";
};
&uart1 {
// Host Console
status = "okay";
@ -196,6 +191,14 @@ &mac0 {
use-ncsi;
};
&mac1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii2_default>;
use-ncsi;
};
&adc {
status = "okay";
};

120
arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
View file

@ -2,36 +2,16 @@
// Copyright (c) 2018 Facebook Inc.
/dts-v1/;
#include "aspeed-g4.dtsi"
#include "ast2400-facebook-netbmc-common.dtsi"
/ {
model = "Facebook Wedge 100 BMC";
compatible = "facebook,wedge100-bmc", "aspeed,ast2400";
aliases {
/*
* Override the default uart aliases to avoid breaking
* the legacy applications.
*/
serial0 = &uart5;
serial1 = &uart1;
serial2 = &uart3;
serial3 = &uart4;
};
chosen {
stdout-path = &uart3;
bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
};
memory@40000000 {
reg = <0x40000000 0x20000000>;
};
};
&wdt1 {
status = "okay";
aspeed,reset-type = "system";
};
&wdt2 {
@ -40,108 +20,38 @@ &wdt2 {
};
&fmc {
status = "okay";
flash@0 {
flash@1 {
status = "okay";
m25p,fast-read;
label = "fmc0";
#include "facebook-bmc-flash-layout.dtsi"
label = "spi0.1";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
flash1@0 {
reg = <0x0 0x2000000>;
label = "flash1";
};
};
};
};
&uart1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd1_default
&pinctrl_rxd1_default>;
};
&uart3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd3_default
&pinctrl_rxd3_default>;
};
&uart4 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd4_default
&pinctrl_rxd4_default>;
};
&uart5 {
status = "okay";
};
&mac1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
&i2c0 {
status = "okay";
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
};
&i2c4 {
status = "okay";
};
&i2c5 {
status = "okay";
};
&i2c6 {
status = "okay";
};
&i2c7 {
status = "okay";
i2c-switch@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
};
};
&i2c8 {
status = "okay";
};
&i2c9 {
status = "okay";
};
&i2c10 {
status = "okay";
};
&i2c11 {
status = "okay";
};
&i2c12 {
status = "okay";
};
&i2c13 {
status = "okay";
};
&vhub {
status = "okay";

112
arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
View file

@ -2,137 +2,27 @@
// Copyright (c) 2018 Facebook Inc.
/dts-v1/;
#include "aspeed-g4.dtsi"
#include "ast2400-facebook-netbmc-common.dtsi"
/ {
model = "Facebook Wedge 40 BMC";
compatible = "facebook,wedge40-bmc", "aspeed,ast2400";
aliases {
/*
* Override the default uart aliases to avoid breaking
* the legacy applications.
*/
serial0 = &uart5;
serial1 = &uart1;
serial2 = &uart3;
serial3 = &uart4;
};
chosen {
stdout-path = &uart3;
bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
};
memory@40000000 {
reg = <0x40000000 0x20000000>;
};
ast-adc-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
};
};
&wdt1 {
status = "okay";
aspeed,reset-type = "system";
};
&wdt2 {
status = "disabled";
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
m25p,fast-read;
label = "spi0.0";
#include "facebook-bmc-flash-layout.dtsi"
};
};
&uart1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd1_default
&pinctrl_rxd1_default>;
};
&uart3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd3_default
&pinctrl_rxd3_default>;
};
&uart4 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd4_default
&pinctrl_rxd4_default
&pinctrl_ndts4_default>;
};
&uart5 {
status = "okay";
};
&mac1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
&i2c0 {
status = "okay";
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
};
&i2c4 {
status = "okay";
};
&i2c5 {
status = "okay";
};
&i2c6 {
status = "okay";
};
&i2c7 {
status = "okay";
};
&i2c8 {
status = "okay";
};
&i2c11 {
status = "okay";
};
&i2c12 {
status = "okay";
};
&vhub {
status = "okay";
};
&adc {
status = "okay";
};

4
arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
View file

@ -124,8 +124,8 @@ fit@80000 {
* "data0" partition (4MB) is reserved for persistent
* data store.
*/
data0@3800000 {
reg = <0x7c00000 0x800000>;
data0@7c00000 {
reg = <0x7c00000 0x400000>;
label = "data0";
};

37
arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts Normal file
View file

@ -0,0 +1,37 @@
// SPDX-License-Identifier: GPL-2.0-or-later
// Copyright 2020 IBM Corp.
/dts-v1/;
#include "aspeed-bmc-ibm-rainier.dts"
/ {
model = "Rainier 4U";
};
&i2c3 {
power-supply@6a {
compatible = "ibm,cffps";
reg = <0x6a>;
};
power-supply@6b {
compatible = "ibm,cffps";
reg = <0x6b>;
};
};
&fan0 {
tach-pulses = <4>;
};
&fan1 {
tach-pulses = <4>;
};
&fan2 {
tach-pulses = <4>;
};
&fan3 {
tach-pulses = <4>;
};

39
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
View file

@ -8,7 +8,7 @@
#include <dt-bindings/leds/leds-pca955x.h>
/ {
model = "Rainier";
model = "Rainier 2U";
compatible = "ibm,rainier-bmc", "aspeed,ast2600";
aliases {
@ -47,9 +47,18 @@ reserved-memory {
#size-cells = <1>;
ranges;
flash_memory: region@B8000000 {
flash_memory: region@b8000000 {
no-map;
reg = <0xB8000000 0x04000000>; /* 64M */
reg = <0xb8000000 0x04000000>; /* 64M */
};
ramoops@bc000000 {
compatible = "ramoops";
reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
record-size = <0x8000>;
console-size = <0x8000>;
pmsg-size = <0x8000>;
max-reason = <3>; /* KMSG_DUMP_EMERG */
};
vga_memory: region@bf000000 {
@ -258,6 +267,7 @@ eeprom@0 {
cfam0_spi2: spi@40 {
reg = <0x40>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
@ -274,6 +284,7 @@ eeprom@0 {
cfam0_spi3: spi@60 {
reg = <0x60>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
@ -370,6 +381,7 @@ eeprom@0 {
cfam1_spi2: spi@40 {
reg = <0x40>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
@ -386,6 +398,7 @@ eeprom@0 {
cfam1_spi3: spi@60 {
reg = <0x60>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
@ -480,6 +493,7 @@ eeprom@0 {
cfam2_spi2: spi@40 {
reg = <0x40>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
@ -496,6 +510,7 @@ eeprom@0 {
cfam2_spi3: spi@60 {
reg = <0x60>;
compatible = "ibm,fsi2spi-restricted";
#address-cells = <1>;
#size-cells = <0>;
@ -594,16 +609,6 @@ power-supply@69 {
compatible = "ibm,cffps";
reg = <0x69>;
};
power-supply@6a {
compatible = "ibm,cffps";
reg = <0x6a>;
};
power-supply@6b {
compatible = "ibm,cffps";
reg = <0x6b>;
};
};
&i2c4 {
@ -723,25 +728,25 @@ max31785@52 {
#address-cells = <1>;
#size-cells = <0>;
fan@0 {
fan0: fan@0 {
compatible = "pmbus-fan";
reg = <0>;
tach-pulses = <2>;
};
fan@1 {
fan1: fan@1 {
compatible = "pmbus-fan";
reg = <1>;
tach-pulses = <2>;
};
fan@2 {
fan2: fan@2 {
compatible = "pmbus-fan";
reg = <2>;
tach-pulses = <2>;
};
fan@3 {
fan3: fan@3 {
compatible = "pmbus-fan";
reg = <3>;
tach-pulses = <2>;

4
arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
View file

@ -22,9 +22,9 @@ reserved-memory {
#size-cells = <1>;
ranges;
vga_memory: framebuffer@7f000000 {
vga_memory: framebuffer@9f000000 {
no-map;
reg = <0x7f000000 0x01000000>;
reg = <0x9f000000 0x01000000>; /* 16M */
};
};

11
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
View file

@ -26,11 +26,20 @@ reserved-memory {
#size-cells = <1>;
ranges;
flash_memory: region@ba000000 {
flash_memory: region@b8000000 {
no-map;
reg = <0xb8000000 0x4000000>; /* 64M */
};
ramoops@bc000000 {
compatible = "ramoops";
reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
record-size = <0x8000>;
console-size = <0x8000>;
pmsg-size = <0x8000>;
max-reason = <3>; /* KMSG_DUMP_EMERG */
};
vga_memory: region@bf000000 {
no-map;
compatible = "shared-dma-pool";

2
arch/arm/boot/dts/aspeed-g6.dtsi
View file

@ -363,7 +363,7 @@ gpio0: gpio@1e780000 {
#gpio-cells = <2>;
gpio-controller;
compatible = "aspeed,ast2600-gpio";
reg = <0x1e780000 0x800>;
reg = <0x1e780000 0x400>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 0 208>;
ngpios = <208>;

117
arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi Normal file
View file

@ -0,0 +1,117 @@
// SPDX-License-Identifier: GPL-2.0+
// Copyright (c) 2020 Facebook Inc.
/dts-v1/;
#include "aspeed-g4.dtsi"
/ {
aliases {
/*
* Override the default uart aliases to avoid breaking
* the legacy applications.
*/
serial0 = &uart5;
serial1 = &uart1;
serial2 = &uart3;
serial3 = &uart4;
};
memory@40000000 {
reg = <0x40000000 0x20000000>;
};
};
&wdt1 {
status = "okay";
aspeed,reset-type = "system";
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
m25p,fast-read;
label = "spi0.0";
#include "facebook-bmc-flash-layout.dtsi"
};
};
&uart1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd1_default
&pinctrl_rxd1_default>;
};
&uart3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd3_default
&pinctrl_rxd3_default>;
};
&uart4 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd4_default
&pinctrl_rxd4_default
&pinctrl_ndts4_default>;
};
&uart5 {
status = "okay";
};
&mac1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
&i2c0 {
status = "okay";
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
};
&i2c4 {
status = "okay";
};
&i2c5 {
status = "okay";
};
&i2c6 {
status = "okay";
};
&i2c7 {
status = "okay";
};
&i2c8 {
status = "okay";
};
&i2c11 {
status = "okay";
};
&i2c12 {
status = "okay";
};
&vhub {
status = "okay";
};

55
arch/arm/boot/dts/at91-kizbox.dts
View file

@ -48,48 +48,37 @@ user {
};
};
pwm_leds {
led-controller {
compatible = "pwm-leds";
network_green {
led-1 {
label = "pwm:green:network";
pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>;
pwms = <&tcb1_pwm1 0 10000000 PWM_POLARITY_INVERTED>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
network_red {
led-2 {
label = "pwm:red:network";
pwms = <&tcb_pwm 4 10000000 PWM_POLARITY_INVERTED>;
pwms = <&tcb1_pwm2 0 10000000 PWM_POLARITY_INVERTED>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
user_green {
led-3 {
label = "pwm:green:user";
pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>;
pwms = <&tcb1_pwm0 0 10000000 PWM_POLARITY_INVERTED>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
user_red {
led-4 {
label = "pwm:red:user";
pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>;
pwms = <&tcb1_pwm0 1 10000000 PWM_POLARITY_INVERTED>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
};
tcb_pwm: pwm {
compatible = "atmel,tcb-pwm";
#pwm-cells = <3>;
tc-block = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tcb1_tioa0
&pinctrl_tcb1_tioa1
&pinctrl_tcb1_tioa2
&pinctrl_tcb1_tiob0>;
};
};
&tcb0 {
@ -104,6 +93,32 @@ timer@2 {
};
};
&tcb1 {
tcb1_pwm0: pwm@0 {
compatible = "atmel,tcb-pwm";
reg = <0>;
#pwm-cells = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tcb1_tioa0 &pinctrl_tcb1_tiob0>;
};
tcb1_pwm1: pwm@1 {
compatible = "atmel,tcb-pwm";
reg = <1>;
#pwm-cells = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tcb1_tioa1>;
};
tcb1_pwm2: pwm@2 {
compatible = "atmel,tcb-pwm";
reg = <2>;
#pwm-cells = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tcb1_tioa2>;
};
};
&ebi {
status = "okay";
};

8
arch/arm/boot/dts/at91-kizbox2-common.dtsi
View file

@ -58,24 +58,24 @@ user {
};
};
pwm_leds {
led-controller {
compatible = "pwm-leds";
blue {
led-1 {
label = "pwm:blue:user";
pwms = <&pwm0 2 10000000 0>;
max-brightness = <255>;
linux,default-trigger = "none";
};
green {
led-2 {
label = "pwm:green:user";
pwms = <&pwm0 1 10000000 0>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
red {
led-3 {
label = "pwm:red:user";
pwms = <&pwm0 0 10000000 0>;
max-brightness = <255>;

16
arch/arm/boot/dts/at91-kizbox3-hs.dts
View file

@ -15,40 +15,40 @@ / {
model = "Overkiz KIZBOX3-HS";
compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5";
pwm_leds {
led-controller-1 {
status = "okay";
red {
led-1 {
status = "okay";
};
green {
led-2 {
status = "okay";
};
blue {
led-3 {
status = "okay";
};
white {
led-4 {
status = "okay";
};
};
leds {
led-controller-2 {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led_red
&pinctrl_led_white>;
status = "okay";
red {
led-5 {
label = "pio:red:user";
gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
white {
led-6 {
label = "pio:white:user";
gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
default-state = "off";

10
arch/arm/boot/dts/at91-kizbox3_common.dtsi
View file

@ -62,7 +62,7 @@ vdd_adc_vref: supply_3v3_ref {
regulator-always-on;
};
pwm_leds {
led-controller-1 {
compatible = "pwm-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_pwm_h0
@ -71,7 +71,7 @@ &pinctrl_pwm0_pwm_h2
&pinctrl_pwm0_pwm_h3>;
status = "disabled";
red {
led-1 {
label = "pwm:red:user";
pwms = <&pwm0 0 10000000 0>;
max-brightness = <255>;
@ -79,7 +79,7 @@ red {
status = "disabled";
};
green {
led-2 {
label = "pwm:green:user";
pwms = <&pwm0 1 10000000 0>;
max-brightness = <255>;
@ -87,14 +87,14 @@ green {
status = "disabled";
};
blue {
led-3 {
label = "pwm:blue:user";
pwms = <&pwm0 2 10000000 0>;
max-brightness = <255>;
status = "disabled";
};
white {
led-4 {
label = "pwm:white:user";
pwms = <&pwm0 3 10000000 0>;
max-brightness = <255>;

8
arch/arm/boot/dts/at91-kizboxmini-common.dtsi
View file

@ -54,10 +54,10 @@ reset {
};
};
leds: pwm_leds {
leds: led-controller-1 {
compatible = "pwm-leds";
led_blue: pwm_blue {
led_blue: led-1 {
label = "pwm:blue:user";
pwms = <&pwm0 2 10000000 0>;
max-brightness = <255>;
@ -65,14 +65,14 @@ led_blue: pwm_blue {
status = "disabled";
};
led_green: pwm_green {
led_green: led-2 {
label = "pwm:green:user";
pwms = <&pwm0 0 10000000 0>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
led_red: pwm_red {
led_red: led-3 {
label = "pwm:red:user";
pwms = <&pwm0 1 10000000 0>;
max-brightness = <255>;

13
arch/arm/boot/dts/at91-sam9x60ek.dts
View file

@ -569,11 +569,14 @@ pinctrl_usba_vbus: usba_vbus {
atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
}; /* pinctrl */
&pmc {
atmel,osc-bypass;
};
usb1 {
pinctrl_usb_default: usb_default {
atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
}; /* pinctrl */
&pwm0 {
pinctrl-names = "default";
@ -684,6 +687,8 @@ &usb1 {
atmel,vbus-gpio = <0
&pioD 15 GPIO_ACTIVE_HIGH
&pioD 16 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_default>;
status = "okay";
};

2
arch/arm/boot/dts/at91-sama5d27_som1.dtsi
View file

@ -100,7 +100,7 @@ i2c0: i2c@f8028000 {
status = "okay";
at24@50 {
compatible = "24c02";
compatible = "atmel,24c02";
reg = <0x50>;
pagesize = <8>;
};

7
arch/arm/boot/dts/at91-sama5d3_xplained.dts
View file

@ -242,6 +242,11 @@ pinctrl_usba_vbus: usba_vbus {
atmel,pins =
<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */
};
pinctrl_usb_default: usb_default {
atmel,pins =
<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
};
};
@ -259,6 +264,8 @@ usb1: ohci@600000 {
&pioE 3 GPIO_ACTIVE_LOW
&pioE 4 GPIO_ACTIVE_LOW
>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_default>;
status = "okay";
};

7
arch/arm/boot/dts/at91-sama5d4_xplained.dts
View file

@ -134,6 +134,11 @@ pinctrl_usba_vbus: usba_vbus {
atmel,pins =
<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
};
pinctrl_usb_default: usb_default {
atmel,pins =
<AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
pinctrl_key_gpio: key_gpio_0 {
atmel,pins =
<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
@ -159,6 +164,8 @@ usb1: ohci@500000 {
&pioE 11 GPIO_ACTIVE_HIGH
&pioE 14 GPIO_ACTIVE_HIGH
>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb_default>;
status = "okay";
};

6
arch/arm/boot/dts/at91-smartkiz.dts
View file

@ -84,10 +84,8 @@ &rtc {
status = "okay";
};
&leds {
blue {
status = "okay";
};
&led_blue {
status = "okay";
};
&adc0 {

25
arch/arm/boot/dts/at91sam9260.dtsi
View file

@ -697,8 +697,6 @@ spi1: spi@fffcc000 {
};
adc0: adc@fffe0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91sam9260-adc";
reg = <0xfffe0000 0x100>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
@ -708,29 +706,6 @@ adc0: adc@fffe0000 {
atmel,adc-channels-used = <0xf>;
atmel,adc-vref = <3300>;
atmel,adc-startup-time = <15>;
atmel,adc-res = <8 10>;
atmel,adc-res-names = "lowres", "highres";
atmel,adc-use-res = "highres";
trigger0 {
trigger-name = "timer-counter-0";
trigger-value = <0x1>;
};
trigger1 {
trigger-name = "timer-counter-1";
trigger-value = <0x3>;
};
trigger2 {
trigger-name = "timer-counter-2";
trigger-value = <0x5>;
};
trigger3 {
trigger-name = "external";
trigger-value = <0xd>;
trigger-external;
};
};
rtc@fffffd20 {

27
arch/arm/boot/dts/at91sam9g45.dtsi
View file

@ -812,8 +812,6 @@ ac97: sound@fffac000 {
};
adc0: adc@fffb0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91sam9g45-adc";
reg = <0xfffb0000 0x100>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
@ -822,31 +820,6 @@ adc0: adc@fffb0000 {
atmel,adc-channels-used = <0xff>;
atmel,adc-vref = <3300>;
atmel,adc-startup-time = <40>;
atmel,adc-res = <8 10>;
atmel,adc-res-names = "lowres", "highres";
atmel,adc-use-res = "highres";
trigger0 {
trigger-name = "external-rising";
trigger-value = <0x1>;
trigger-external;
};
trigger1 {
trigger-name = "external-falling";
trigger-value = <0x2>;
trigger-external;
};
trigger2 {
trigger-name = "external-any";
trigger-value = <0x3>;
trigger-external;
};
trigger3 {
trigger-name = "continuous";
trigger-value = <0x6>;
};
};
isi@fffb4000 {

10
arch/arm/boot/dts/at91sam9m10g45ek.dts
View file

@ -315,27 +315,27 @@ usb1: ehci@800000 {
};
};
leds {
led-controller-1 {
compatible = "gpio-leds";
d8 {
led-1 {
label = "d8";
gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
pwmleds {
led-controller-2 {
compatible = "pwm-leds";
d6 {
led-2 {
label = "d6";
pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
max-brightness = <255>;
linux,default-trigger = "nand-disk";
};
d7 {
led-3 {
label = "d7";
pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
max-brightness = <255>;

25
arch/arm/boot/dts/at91sam9rl.dtsi
View file

@ -266,8 +266,6 @@ spi0: spi@fffcc000 {
};
adc0: adc@fffd0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91sam9rl-adc";
reg = <0xfffd0000 0x100>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
@ -277,29 +275,6 @@ adc0: adc@fffd0000 {
atmel,adc-channels-used = <0x3f>;
atmel,adc-vref = <3300>;
atmel,adc-startup-time = <40>;
atmel,adc-res = <8 10>;
atmel,adc-res-names = "lowres", "highres";
atmel,adc-use-res = "highres";
trigger0 {
trigger-name = "timer-counter-0";
trigger-value = <0x1>;
};
trigger1 {
trigger-name = "timer-counter-1";
trigger-value = <0x3>;
};
trigger2 {
trigger-name = "timer-counter-2";
trigger-value = <0x5>;
};
trigger3 {
trigger-name = "external";
trigger-value = <0x13>;
trigger-external;
};
};
usb0: gadget@fffd4000 {

10
arch/arm/boot/dts/at91sam9rlek.dts
View file

@ -218,26 +218,26 @@ rtc@fffffe00 {
};
};
pwmleds {
led-controller-1 {
compatible = "pwm-leds";
ds1 {
led-1 {
label = "ds1";
pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
max-brightness = <255>;
};
ds2 {
led-2 {
label = "ds2";
pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
max-brightness = <255>;
};
};
leds {
led-controller-2 {
compatible = "gpio-leds";
ds3 {
led-3 {
label = "ds3";
gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";

28
arch/arm/boot/dts/at91sam9x5.dtsi
View file

@ -795,8 +795,6 @@ uart1: serial@f8044000 {
};
adc0: adc@f804c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91sam9x5-adc";
reg = <0xf804c000 0x100>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
@ -808,32 +806,6 @@ adc0: adc@f804c000 {
atmel,adc-vref = <3300>;
atmel,adc-startup-time = <40>;
atmel,adc-sample-hold-time = <11>;
atmel,adc-res = <8 10>;
atmel,adc-res-names = "lowres", "highres";
atmel,adc-use-res = "highres";
trigger0 {
trigger-name = "external-rising";
trigger-value = <0x1>;
trigger-external;
};
trigger1 {
trigger-name = "external-falling";
trigger-value = <0x2>;
trigger-external;
};
trigger2 {
trigger-name = "external-any";
trigger-value = <0x3>;
trigger-external;
};
trigger3 {
trigger-name = "continuous";
trigger-value = <0x6>;
};
};
spi0: spi@f0000000 {

1
arch/arm/boot/dts/bcm-cygnus.dtsi
View file

@ -591,7 +591,6 @@ touchscreen: touchscreen@180a6000 {
adc: adc@180a6000 {
compatible = "brcm,iproc-static-adc";
#io-channel-cells = <1>;
io-channel-ranges;
adc-syscon = <&ts_adc_syscon>;
clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
clock-names = "tsc_clk";

8
arch/arm/boot/dts/bcm-nsp.dtsi
View file

@ -385,12 +385,12 @@ ccbtimer1: timer@35000 {
clock-names = "apb_pclk";
};
srab: srab@36000 {
srab: ethernet-switch@36000 {
compatible = "brcm,nsp-srab";
reg = <0x36000 0x1000>,
<0x3f308 0x8>,
<0x3f410 0xc>;
reg-names = "srab", "mux_config", "sgmii";
reg-names = "srab", "mux_config", "sgmii_config";
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
@ -420,6 +420,10 @@ srab: srab@36000 {
status = "disabled";
/* ports are defined in board DTS */
ports {
#address-cells = <1>;
#size-cells = <0>;
};
};
i2c0: i2c@38000 {

2
arch/arm/boot/dts/bcm2711-rpi-4-b.dts
View file

@ -181,12 +181,14 @@ &gpio {
&hdmi0 {
clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
clock-names = "hdmi", "bvb", "audio", "cec";
wifi-2.4ghz-coexistence;
status = "okay";
};
&hdmi1 {
clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
clock-names = "hdmi", "bvb", "audio", "cec";
wifi-2.4ghz-coexistence;
status = "okay";
};

2
arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
View file

@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
&usb {
dr_mode = "otg";
g-rx-fifo-size = <256>;
g-rx-fifo-size = <558>;
g-np-tx-fifo-size = <32>;
/*
* According to dwc2 the sum of all device EP

2
arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
View file

@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
&usb {
dr_mode = "peripheral";
g-rx-fifo-size = <256>;
g-rx-fifo-size = <558>;
g-np-tx-fifo-size = <32>;
g-tx-fifo-size = <256 256 512 512 512 768 768>;
};

7
arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
View file

@ -57,17 +57,10 @@ &spi_nor {
status = "okay";
};
&usb3_phy {
status = "okay";
};
&srab {
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "poe";

7
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
View file

@ -64,17 +64,10 @@ &spi_nor {
status = "okay";
};
&usb3_phy {
status = "okay";
};
&srab {
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@4 {
reg = <4>;
label = "lan";

3
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
View file

@ -122,9 +122,6 @@ &srab {
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan4";

4
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
View file

@ -117,7 +117,3 @@ eject {
};
};
};
&usb3_phy {
status = "okay";
};

7
arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
View file

@ -57,17 +57,10 @@ &spi_nor {
status = "okay";
};
&usb3_phy {
status = "okay";
};
&srab {
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@4 {
reg = <4>;
label = "poe";

7
arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
View file

@ -105,17 +105,10 @@ &spi_nor {
status = "okay";
};
&usb3_phy {
status = "okay";
};
&srab {
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan4";

4
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
View file

@ -126,7 +126,3 @@ nvram@ff0000 {
&usb2 {
vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
&usb3_phy {
status = "okay";
};

4
arch/arm/boot/dts/bcm4709.dtsi
View file

@ -9,3 +9,7 @@ &uart0 {
clock-frequency = <125000000>;
status = "okay";
};
&srab {
compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
};

94
arch/arm/boot/dts/bcm47094-linksys-panamera.dts
View file

@ -123,33 +123,13 @@ bluebar8 {
};
};
mdio-bus-mux {
#address-cells = <1>;
#size-cells = <0>;
mdio-bus-mux@18003000 {
/* BIT(9) = 1 => external mdio */
mdio_ext: mdio@200 {
mdio@200 {
reg = <0x200>;
#address-cells = <1>;
#size-cells = <0>;
};
};
mdio-mii-mux {
compatible = "mdio-mux-mmioreg";
mdio-parent-bus = <&mdio_ext>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1800c1c0 0x4>;
/* BIT(6) = mdc, BIT(7) = mdio */
mux-mask = <0xc0>;
mdio-mii@0 {
/* Enable MII function */
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
switch@0 {
compatible = "brcm,bcm53125";
@ -159,6 +139,8 @@ switch@0 {
reset-names = "robo_reset";
reg = <0>;
dsa,member = <1 0>;
pinctrl-names = "default";
pinctrl-0 = <&pinmux_mdio>;
ports {
#address-cells = <1>;
@ -219,9 +201,6 @@ &srab {
dsa,member = <0 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
label = "lan7";
@ -242,6 +221,30 @@ port@4 {
label = "wan";
};
port@5 {
reg = <5>;
ethernet = <&gmac0>;
label = "cpu";
status = "disabled";
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@7 {
reg = <7>;
ethernet = <&gmac1>;
label = "cpu";
status = "disabled";
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@8 {
reg = <8>;
ethernet = <&gmac2>;
@ -268,3 +271,44 @@ fixed-link {
&usb3_phy {
status = "okay";
};
&nandcs {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "boot";
reg = <0x0000000 0x0080000>;
read-only;
};
partition@80000 {
label = "nvram";
reg = <0x080000 0x0100000>;
};
partition@180000{
label = "devinfo";
reg = <0x0180000 0x080000>;
};
partition@200000 {
label = "firmware";
reg = <0x0200000 0x01D00000>;
compatible = "brcm,trx";
};
partition@1F00000 {
label = "failsafe";
reg = <0x01F00000 0x01D00000>;
read-only;
};
partition@5200000 {
label = "system";
reg = <0x05200000 0x02E00000>;
};
};
};

Some files were not shown because too many files have changed in this diff Show more