diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index 9a60fde32b02..ea893cbef73d 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -22,6 +22,11 @@ Required properties :
 
 Optional properties :
 - #power-domain-cells : shall contain 1
+- Qualcomm TSENS (thermal sensor device) on some devices can
+be part of GCC and hence the TSENS properties can also be
+part of the GCC/clock-controller node.
+For more details on the TSENS properties please refer
+Documentation/devicetree/bindings/thermal/qcom-tsens.txt
 
 Example:
 	clock-controller@900000 {
@@ -31,3 +36,14 @@ Example:
 		#reset-cells = <1>;
 		#power-domain-cells = <1>;
 	};
+
+Example of GCC with TSENS properties:
+	clock-controller@900000 {
+		compatible = "qcom,gcc-apq8064";
+		reg = <0x00900000 0x4000>;
+		nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+		nvmem-cell-names = "calib", "calib_backup";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		#thermal-sensor-cells = <1>;
+	};
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 690001bc82a8..9deb07810043 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -603,6 +603,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-ipq8064-ap148.dtb \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \
+	qcom-msm8974-lge-nexus5-hammerhead.dtb \
 	qcom-msm8974-sony-xperia-honami.dtb
 dtb-$(CONFIG_ARCH_REALVIEW) += \
 	arm-realview-pb1176.dtb \
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 0abc93e5bb00..6c0038398ef2 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -239,6 +239,45 @@ pinconf {
 						};
 					};
 				};
+
+				led@48 {
+					/*
+					 * The keypad LED @0x48 is routed to
+					 * the sensor board where it is
+					 * connected to an infrared LED
+					 * SFH4650 (60mW, @850nm) next to the
+					 * ambient light and proximity sensor
+					 * Capella Microsystems CM3605.
+					 */
+					compatible = "qcom,pm8058-keypad-led";
+					reg = <0x48>;
+					label = "pm8058:infrared:proximitysensor";
+					default-state = "off";
+				};
+				led@131 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x131>;
+					label = "pm8058:red";
+					default-state = "off";
+				};
+				led@132 {
+					/*
+					 * This is actually green too on my
+					 * board, but documented as yellow.
+					 */
+					compatible = "qcom,pm8058-led";
+					reg = <0x132>;
+					label = "pm8058:yellow";
+					default-state = "off";
+					linux,default-trigger = "mmc0";
+				};
+				led@133 {
+					compatible = "qcom,pm8058-led";
+					reg = <0x133>;
+					label = "pm8058:green";
+					default-state = "on";
+					linux,default-trigger = "heartbeat";
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index 7b05f072bfc2..b72e09506448 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -253,6 +253,7 @@ phy@12500000 {
 			vddcx-supply	= <&pm8921_s3>;
 			v3p3-supply	= <&pm8921_l3>;
 			v1p8-supply	= <&pm8921_l4>;
+			dr_mode		= "otg";
 		};
 
 		gadget@12500000 {
@@ -272,5 +273,19 @@ sdcc@12400000 {
 				vqmmc-supply = <&pm8921_s4>;
 			};
 		};
+
+		imem@2a03f000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x2a03f000 0x1000>;
+
+			reboot-mode {
+				compatible = "syscon-reboot-mode";
+				offset = <0x65c>;
+
+				mode-normal	= <0x77665501>;
+				mode-bootloader	= <0x77665500>;
+				mode-recovery	= <0x77665502>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 74a9b6c394f5..1dbe697b2e90 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -5,6 +5,7 @@
 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 / {
 	model = "Qualcomm APQ8064";
@@ -86,6 +87,92 @@ CPU_SPC: spc {
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 7>;
+			coefficients = <1199 0>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 8>;
+			coefficients = <1132 0>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 9>;
+			coefficients = <1199 0>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&gcc 10>;
+			coefficients = <1132 0>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <1 10 0x304>;
@@ -559,22 +646,50 @@ pm8921_gpio: gpio@150 {
 					compatible = "qcom,pm8921-gpio",
 						     "qcom,ssbi-gpio";
 					reg = <0x150>;
-					interrupts = <192 1>, <193 1>, <194 1>,
-						     <195 1>, <196 1>, <197 1>,
-						     <198 1>, <199 1>, <200 1>,
-						     <201 1>, <202 1>, <203 1>,
-						     <204 1>, <205 1>, <206 1>,
-						     <207 1>, <208 1>, <209 1>,
-						     <210 1>, <211 1>, <212 1>,
-						     <213 1>, <214 1>, <215 1>,
-						     <216 1>, <217 1>, <218 1>,
-						     <219 1>, <220 1>, <221 1>,
-						     <222 1>, <223 1>, <224 1>,
-						     <225 1>, <226 1>, <227 1>,
-						     <228 1>, <229 1>, <230 1>,
-						     <231 1>, <232 1>, <233 1>,
-						     <234 1>, <235 1>;
-
+					interrupts = <192 IRQ_TYPE_NONE>,
+						     <193 IRQ_TYPE_NONE>,
+						     <194 IRQ_TYPE_NONE>,
+						     <195 IRQ_TYPE_NONE>,
+						     <196 IRQ_TYPE_NONE>,
+						     <197 IRQ_TYPE_NONE>,
+						     <198 IRQ_TYPE_NONE>,
+						     <199 IRQ_TYPE_NONE>,
+						     <200 IRQ_TYPE_NONE>,
+						     <201 IRQ_TYPE_NONE>,
+						     <202 IRQ_TYPE_NONE>,
+						     <203 IRQ_TYPE_NONE>,
+						     <204 IRQ_TYPE_NONE>,
+						     <205 IRQ_TYPE_NONE>,
+						     <206 IRQ_TYPE_NONE>,
+						     <207 IRQ_TYPE_NONE>,
+						     <208 IRQ_TYPE_NONE>,
+						     <209 IRQ_TYPE_NONE>,
+						     <210 IRQ_TYPE_NONE>,
+						     <211 IRQ_TYPE_NONE>,
+						     <212 IRQ_TYPE_NONE>,
+						     <213 IRQ_TYPE_NONE>,
+						     <214 IRQ_TYPE_NONE>,
+						     <215 IRQ_TYPE_NONE>,
+						     <216 IRQ_TYPE_NONE>,
+						     <217 IRQ_TYPE_NONE>,
+						     <218 IRQ_TYPE_NONE>,
+						     <219 IRQ_TYPE_NONE>,
+						     <220 IRQ_TYPE_NONE>,
+						     <221 IRQ_TYPE_NONE>,
+						     <222 IRQ_TYPE_NONE>,
+						     <223 IRQ_TYPE_NONE>,
+						     <224 IRQ_TYPE_NONE>,
+						     <225 IRQ_TYPE_NONE>,
+						     <226 IRQ_TYPE_NONE>,
+						     <227 IRQ_TYPE_NONE>,
+						     <228 IRQ_TYPE_NONE>,
+						     <229 IRQ_TYPE_NONE>,
+						     <230 IRQ_TYPE_NONE>,
+						     <231 IRQ_TYPE_NONE>,
+						     <232 IRQ_TYPE_NONE>,
+						     <233 IRQ_TYPE_NONE>,
+						     <234 IRQ_TYPE_NONE>,
+						     <235 IRQ_TYPE_NONE>;
 					gpio-controller;
 					#gpio-cells = <2>;
 
@@ -587,9 +702,18 @@ pm8921_mpps: mpps@50 {
 					gpio-controller;
 					#gpio-cells = <2>;
 					interrupts =
-					<128 1>, <129 1>, <130 1>, <131 1>,
-					<132 1>, <133 1>, <134 1>, <135 1>,
-					<136 1>, <137 1>, <138 1>, <139 1>;
+					<128 IRQ_TYPE_NONE>,
+					<129 IRQ_TYPE_NONE>,
+					<130 IRQ_TYPE_NONE>,
+					<131 IRQ_TYPE_NONE>,
+					<132 IRQ_TYPE_NONE>,
+					<133 IRQ_TYPE_NONE>,
+					<134 IRQ_TYPE_NONE>,
+					<135 IRQ_TYPE_NONE>,
+					<136 IRQ_TYPE_NONE>,
+					<137 IRQ_TYPE_NONE>,
+					<138 IRQ_TYPE_NONE>,
+					<139 IRQ_TYPE_NONE>;
 				};
 
 				rtc@11d {
@@ -611,11 +735,28 @@ pwrkey@1c {
 			};
 		};
 
+		qfprom: qfprom@700000 {
+			compatible	= "qcom,qfprom";
+			reg		= <0x00700000 0x1000>;
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			ranges;
+			tsens_calib: calib {
+				reg = <0x404 0x10>;
+			};
+			tsens_backup: backup_calib {
+				reg = <0x414 0x10>;
+			};
+		};
+
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-apq8064";
 			reg = <0x00900000 0x4000>;
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#thermal-sensor-cells = <1>;
 		};
 
 		lcc: clock-controller@28000000 {
@@ -712,7 +853,6 @@ usb1_phy: phy@12500000 {
 			reg		= <0x12500000 0x400>;
 			interrupts	= <GIC_SPI 100 IRQ_TYPE_NONE>;
 			status		= "disabled";
-			dr_mode		= "host";
 
 			clocks		= <&gcc USB_HS1_XCVR_CLK>,
 					  <&gcc USB_HS1_H_CLK>;
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 7c2df062a025..39eb7a4ed16a 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -94,6 +94,88 @@ scm {
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <1 7 0xf04>;
@@ -150,6 +232,27 @@ apcs: syscon@f9011000 {
 			reg = <0xf9011000 0x1000>;
 		};
 
+		qfprom: qfprom@fc4bc000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			tsens_calib: calib@d0 {
+				reg = <0xd0 0x18>;
+			};
+			tsens_backup: backup@440 {
+				reg = <0x440 0x10>;
+			};
+		};
+
+		tsens: thermal-sensor@fc4a8000 {
+			compatible = "qcom,msm8974-tsens";
+			reg = <0xfc4a8000 0x2000>;
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
+			#thermal-sensor-cells = <1>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index d501382493e3..348503d1a1c1 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -95,6 +95,7 @@ sata-phy@1b400000 {
 		};
 
 		sata@29000000 {
+			ports-implemented = <0x1>;
 			status = "ok";
 		};
 	};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index acbe71febe13..8c65e0d82559 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -2,6 +2,7 @@
 
 /include/ "skeleton.dtsi"
 
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8660.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
@@ -159,21 +160,50 @@ pm8058_gpio: gpio@150 {
 						     "qcom,ssbi-gpio";
 					reg = <0x150>;
 					interrupt-parent = <&pmicintc>;
-					interrupts = <192 1>, <193 1>, <194 1>,
-						     <195 1>, <196 1>, <197 1>,
-						     <198 1>, <199 1>, <200 1>,
-						     <201 1>, <202 1>, <203 1>,
-						     <204 1>, <205 1>, <206 1>,
-						     <207 1>, <208 1>, <209 1>,
-						     <210 1>, <211 1>, <212 1>,
-						     <213 1>, <214 1>, <215 1>,
-						     <216 1>, <217 1>, <218 1>,
-						     <219 1>, <220 1>, <221 1>,
-						     <222 1>, <223 1>, <224 1>,
-						     <225 1>, <226 1>, <227 1>,
-						     <228 1>, <229 1>, <230 1>,
-						     <231 1>, <232 1>, <233 1>,
-						     <234 1>, <235 1>;
+					interrupts = <192 IRQ_TYPE_NONE>,
+						     <193 IRQ_TYPE_NONE>,
+						     <194 IRQ_TYPE_NONE>,
+						     <195 IRQ_TYPE_NONE>,
+						     <196 IRQ_TYPE_NONE>,
+						     <197 IRQ_TYPE_NONE>,
+						     <198 IRQ_TYPE_NONE>,
+						     <199 IRQ_TYPE_NONE>,
+						     <200 IRQ_TYPE_NONE>,
+						     <201 IRQ_TYPE_NONE>,
+						     <202 IRQ_TYPE_NONE>,
+						     <203 IRQ_TYPE_NONE>,
+						     <204 IRQ_TYPE_NONE>,
+						     <205 IRQ_TYPE_NONE>,
+						     <206 IRQ_TYPE_NONE>,
+						     <207 IRQ_TYPE_NONE>,
+						     <208 IRQ_TYPE_NONE>,
+						     <209 IRQ_TYPE_NONE>,
+						     <210 IRQ_TYPE_NONE>,
+						     <211 IRQ_TYPE_NONE>,
+						     <212 IRQ_TYPE_NONE>,
+						     <213 IRQ_TYPE_NONE>,
+						     <214 IRQ_TYPE_NONE>,
+						     <215 IRQ_TYPE_NONE>,
+						     <216 IRQ_TYPE_NONE>,
+						     <217 IRQ_TYPE_NONE>,
+						     <218 IRQ_TYPE_NONE>,
+						     <219 IRQ_TYPE_NONE>,
+						     <220 IRQ_TYPE_NONE>,
+						     <221 IRQ_TYPE_NONE>,
+						     <222 IRQ_TYPE_NONE>,
+						     <223 IRQ_TYPE_NONE>,
+						     <224 IRQ_TYPE_NONE>,
+						     <225 IRQ_TYPE_NONE>,
+						     <226 IRQ_TYPE_NONE>,
+						     <227 IRQ_TYPE_NONE>,
+						     <228 IRQ_TYPE_NONE>,
+						     <229 IRQ_TYPE_NONE>,
+						     <230 IRQ_TYPE_NONE>,
+						     <231 IRQ_TYPE_NONE>,
+						     <232 IRQ_TYPE_NONE>,
+						     <233 IRQ_TYPE_NONE>,
+						     <234 IRQ_TYPE_NONE>,
+						     <235 IRQ_TYPE_NONE>;
 					gpio-controller;
 					#gpio-cells = <2>;
 
@@ -187,9 +217,18 @@ pm8058_mpps: mpps@50 {
 					#gpio-cells = <2>;
 					interrupt-parent = <&pmicintc>;
 					interrupts =
-					<128 1>, <129 1>, <130 1>, <131 1>,
-					<132 1>, <133 1>, <134 1>, <135 1>,
-					<136 1>, <137 1>, <138 1>, <139 1>;
+					<128 IRQ_TYPE_NONE>,
+					<129 IRQ_TYPE_NONE>,
+					<130 IRQ_TYPE_NONE>,
+					<131 IRQ_TYPE_NONE>,
+					<132 IRQ_TYPE_NONE>,
+					<133 IRQ_TYPE_NONE>,
+					<134 IRQ_TYPE_NONE>,
+					<135 IRQ_TYPE_NONE>,
+					<136 IRQ_TYPE_NONE>,
+					<137 IRQ_TYPE_NONE>,
+					<138 IRQ_TYPE_NONE>,
+					<139 IRQ_TYPE_NONE>;
 				};
 
 				pwrkey@1c {
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
new file mode 100644
index 000000000000..c0fb4a698c56
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -0,0 +1,262 @@
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "LGE MSM 8974 HAMMERHEAD";
+	compatible = "lge,hammerhead", "qcom,msm8974";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	smd {
+		rpm {
+			rpm_requests {
+				pm8841-regulators {
+					s1 {
+						regulator-min-microvolt = <675000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s2 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s4 {
+						regulator-min-microvolt = <815000>;
+						regulator-max-microvolt = <900000>;
+					};
+				};
+
+				pm8941-regulators {
+					vdd_l1_l3-supply = <&pm8941_s1>;
+					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+					vdd_l4_l11-supply = <&pm8941_s1>;
+					vdd_l5_l7-supply = <&pm8941_s2>;
+					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+					vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
+					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+					vdd_l21-supply = <&vreg_boost>;
+
+					s1 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s2 {
+						regulator-min-microvolt = <2150000>;
+						regulator-max-microvolt = <2150000>;
+
+						regulator-boot-on;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l1 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l2 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l3 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l4 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l5 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l6 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l7 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l8 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l9 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l10 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l11 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+					};
+
+					l12 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l13 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l14 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l15 {
+						regulator-min-microvolt = <2050000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					l16 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l17 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l18 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l19 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					l20 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l21 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l22 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					l23 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					l24 {
+						regulator-min-microvolt = <3075000>;
+						regulator-max-microvolt = <3075000>;
+
+						regulator-boot-on;
+					};
+				};
+			};
+		};
+	};
+};
+
+&soc {
+	serial@f991d000 {
+		status = "ok";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&spmi_bus {
+	pm8941@0 {
+		gpios@c000 {
+			gpio_keys_pin_a: gpio-keys-active {
+				pins = "gpio2", "gpio3";
+				function = "normal";
+
+				bias-pull-up;
+				power-source = <PM8941_GPIO_S3>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 3fb4dada6b0d..e7c1577d56f4 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -257,23 +257,6 @@ l24 {
 			};
 		};
 	};
-
-	vreg_boost: vreg-boost {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vreg-boost";
-		regulator-min-microvolt = <3150000>;
-		regulator-max-microvolt = <3150000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&boost_bypass_n_pin>;
-     };
 };
 
 &soc {
@@ -311,6 +294,45 @@ serial@f991e000 {
 		pinctrl-0 = <&blsp1_uart2_pin_a>;
 	};
 
+	i2c@f9924000 {
+		status = "ok";
+
+		clock-frequency = <355000>;
+		qcom,src-freq = <50000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_pins>;
+
+		synaptics@2c {
+			compatible = "syna,rmi4-i2c";
+			reg = <0x2c>;
+
+			interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdd-supply = <&pm8941_l22>;
+			vio-supply = <&pm8941_lvs3>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&ts_int_pin>;
+
+			syna,startup-delay-ms = <10>;
+
+			rmi4-f01@1 {
+				reg = <0x1>;
+				syna,nosleep-mode = <1>;
+			};
+
+			rmi4-f11@11 {
+				reg = <0x11>;
+				touchscreen-inverted-x;
+				syna,sensor-type = <1>;
+			};
+		};
+	};
+
 	pinctrl@fd510000 {
 		blsp1_uart2_pin_a: blsp1-uart2-pin-active {
 			rx {
@@ -330,6 +352,16 @@ tx {
 			};
 		};
 
+		i2c2_pins: i2c2 {
+			mux {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
 		sdhc1_pin_a: sdhc1-pin-active {
 			clk {
 				pins = "sdc1_clk";
@@ -366,6 +398,16 @@ cmd-data {
 			};
 		};
 
+		ts_int_pin: touch-int {
+			pin {
+				pins = "gpio61";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+				input-enable;
+			};
+		};
 	};
 
 	dma-controller@f9944000 {
@@ -387,11 +429,6 @@ charger@1000 {
 		};
 
 		gpios@c000 {
-			boost_bypass_n_pin: boost-bypass {
-				pins = "gpio21";
-				function = "normal";
-			};
-
 			gpio_keys_pin_a: gpio-keys-active {
 				pins = "gpio2", "gpio3", "gpio4", "gpio5";
 				function = "normal";
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 561d4d136762..d2109475bdfd 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include <dt-bindings/gpio/gpio.h>
 #include "skeleton.dtsi"
 
 / {
@@ -131,6 +132,88 @@ CPU_SPC: spc {
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				cpu_alert1: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit1: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				cpu_alert2: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit2: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu_alert3: trip0 {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit3: trip1 {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
 		interrupts = <1 7 0xf04>;
@@ -287,6 +370,27 @@ apcs: syscon@f9011000 {
 			reg = <0xf9011000 0x1000>;
 		};
 
+		qfprom: qfprom@fc4bc000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "qcom,qfprom";
+			reg = <0xfc4bc000 0x1000>;
+			tsens_calib: calib@d0 {
+				reg = <0xd0 0x18>;
+			};
+			tsens_backup: backup@440 {
+				reg = <0x440 0x10>;
+			};
+		};
+
+		tsens: thermal-sensor@fc4a8000 {
+			compatible = "qcom,msm8974-tsens";
+			reg = <0xfc4a8000 0x2000>;
+			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+			nvmem-cell-names = "calib", "calib_backup";
+			#thermal-sensor-cells = <1>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -430,6 +534,15 @@ rpm_msg_ram: memory@fc428000 {
 			reg = <0xfc428000 0x4000>;
 		};
 
+		blsp1_uart1: serial@f991d000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991d000 0x1000>;
+			interrupts = <0 107 0x0>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_uart2: serial@f991e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991e000 0x1000>;
@@ -615,4 +728,30 @@ pm8941-regulators {
 			};
 		};
 	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+	};
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index d95edb6f6265..f8eb5e31c920 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -88,6 +88,11 @@ pm8941_gpios: gpios@c000 {
 				     <0 0xe1 0 IRQ_TYPE_NONE>,
 				     <0 0xe2 0 IRQ_TYPE_NONE>,
 				     <0 0xe3 0 IRQ_TYPE_NONE>;
+
+			boost_bypass_n_pin: boost-bypass {
+				pins = "gpio21";
+				function = "normal";
+			};
 		};
 
 		pm8941_mpps: mpps@a000 {