From 99c2e3793f93739e3a9f49afe4366e8d1648656c Mon Sep 17 00:00:00 2001 From: Michael Trimarchi Date: Mon, 30 Dec 2019 17:30:21 +0530 Subject: [PATCH] ARM: dts: imx6qdl-icore: Add fec phy-handle LAN8720 needs a reset of every clock enable. The reset needs to be done at device level, due the flag PHY_RST_AFTER_CLK_EN. So, add phy-handle by creating mdio child node inside fec. This will eventually move the phy-reset-gpio which is defined in fec node. Signed-off-by: Michael Trimarchi Signed-off-by: Jagan Teki Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-icore.dtsi | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index 7814f1ef0804..756f3a9f1b4f 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -150,10 +150,23 @@ &clks { &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>; phy-mode = "rmii"; + phy-handle = <ð_phy>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + eth_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + reset-assert-us = <4000>; + reset-deassert-us = <4000>; + }; + }; }; &gpmi {