[PATCH] Suspend support for libata

This patch adds suspend patch to libata, and ata_piix in particular. For
most low level drivers, they should just need to add the 4 hooks to
work. As I can only test ata_piix, I didn't enable it for more
though.

Suspend support is the single most important feature on a notebook, and
most new notebooks have sata drives. It's quite embarrassing that we
_still_ do not support this. Right now, it's perfectly possible to
suspend the drive in mid-transfer.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Jens Axboe 2006-01-06 09:28:07 +01:00 committed by Linus Torvalds
parent 88202a0c84
commit 9b84754866
7 changed files with 181 additions and 0 deletions

View File

@ -166,6 +166,8 @@ static struct pci_driver piix_pci_driver = {
.id_table = piix_pci_tbl,
.probe = piix_init_one,
.remove = ata_pci_remove_one,
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
};
static struct scsi_host_template piix_sht = {
@ -186,6 +188,8 @@ static struct scsi_host_template piix_sht = {
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
.ordered_flush = 1,
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
};
static const struct ata_port_operations piix_pata_ops = {

View File

@ -4154,6 +4154,96 @@ err_out:
* Inherited from caller.
*/
/*
* Execute a 'simple' command, that only consists of the opcode 'cmd' itself,
* without filling any other registers
*/
static int ata_do_simple_cmd(struct ata_port *ap, struct ata_device *dev,
u8 cmd)
{
struct ata_taskfile tf;
int err;
ata_tf_init(ap, &tf, dev->devno);
tf.command = cmd;
tf.flags |= ATA_TFLAG_DEVICE;
tf.protocol = ATA_PROT_NODATA;
err = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0);
if (err)
printk(KERN_ERR "%s: ata command failed: %d\n",
__FUNCTION__, err);
return err;
}
static int ata_flush_cache(struct ata_port *ap, struct ata_device *dev)
{
u8 cmd;
if (!ata_try_flush_cache(dev))
return 0;
if (ata_id_has_flush_ext(dev->id))
cmd = ATA_CMD_FLUSH_EXT;
else
cmd = ATA_CMD_FLUSH;
return ata_do_simple_cmd(ap, dev, cmd);
}
static int ata_standby_drive(struct ata_port *ap, struct ata_device *dev)
{
return ata_do_simple_cmd(ap, dev, ATA_CMD_STANDBYNOW1);
}
static int ata_start_drive(struct ata_port *ap, struct ata_device *dev)
{
return ata_do_simple_cmd(ap, dev, ATA_CMD_IDLEIMMEDIATE);
}
/**
* ata_device_resume - wakeup a previously suspended devices
*
* Kick the drive back into action, by sending it an idle immediate
* command and making sure its transfer mode matches between drive
* and host.
*
*/
int ata_device_resume(struct ata_port *ap, struct ata_device *dev)
{
if (ap->flags & ATA_FLAG_SUSPENDED) {
ap->flags &= ~ATA_FLAG_SUSPENDED;
ata_set_mode(ap);
}
if (!ata_dev_present(dev))
return 0;
if (dev->class == ATA_DEV_ATA)
ata_start_drive(ap, dev);
return 0;
}
/**
* ata_device_suspend - prepare a device for suspend
*
* Flush the cache on the drive, if appropriate, then issue a
* standbynow command.
*
*/
int ata_device_suspend(struct ata_port *ap, struct ata_device *dev)
{
if (!ata_dev_present(dev))
return 0;
if (dev->class == ATA_DEV_ATA)
ata_flush_cache(ap, dev);
ata_standby_drive(ap, dev);
ap->flags |= ATA_FLAG_SUSPENDED;
return 0;
}
int ata_port_start (struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
@ -4902,6 +4992,23 @@ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
return (tmp == bits->val) ? 1 : 0;
}
int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state)
{
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
int ata_pci_device_resume(struct pci_dev *pdev)
{
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
pci_enable_device(pdev);
pci_set_master(pdev);
return 0;
}
#endif /* CONFIG_PCI */
@ -5005,4 +5112,11 @@ EXPORT_SYMBOL_GPL(ata_pci_host_stop);
EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
EXPORT_SYMBOL_GPL(ata_pci_init_one);
EXPORT_SYMBOL_GPL(ata_pci_remove_one);
EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
EXPORT_SYMBOL_GPL(ata_pci_device_resume);
#endif /* CONFIG_PCI */
EXPORT_SYMBOL_GPL(ata_device_suspend);
EXPORT_SYMBOL_GPL(ata_device_resume);
EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
EXPORT_SYMBOL_GPL(ata_scsi_device_resume);

View File

@ -396,6 +396,22 @@ void ata_dump_status(unsigned id, struct ata_taskfile *tf)
}
}
int ata_scsi_device_resume(struct scsi_device *sdev)
{
struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0];
struct ata_device *dev = &ap->device[sdev->id];
return ata_device_resume(ap, dev);
}
int ata_scsi_device_suspend(struct scsi_device *sdev)
{
struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0];
struct ata_device *dev = &ap->device[sdev->id];
return ata_device_suspend(ap, dev);
}
/**
* ata_to_sense_error - convert ATA error to SCSI error
* @id: ATA device number

View File

@ -263,9 +263,40 @@ static int scsi_bus_match(struct device *dev, struct device_driver *gendrv)
return (sdp->inq_periph_qual == SCSI_INQ_PQ_CON)? 1: 0;
}
static int scsi_bus_suspend(struct device * dev, pm_message_t state)
{
struct scsi_device *sdev = to_scsi_device(dev);
struct scsi_host_template *sht = sdev->host->hostt;
int err;
err = scsi_device_quiesce(sdev);
if (err)
return err;
if (sht->suspend)
err = sht->suspend(sdev);
return err;
}
static int scsi_bus_resume(struct device * dev)
{
struct scsi_device *sdev = to_scsi_device(dev);
struct scsi_host_template *sht = sdev->host->hostt;
int err = 0;
if (sht->resume)
err = sht->resume(sdev);
scsi_device_resume(sdev);
return err;
}
struct bus_type scsi_bus_type = {
.name = "scsi",
.match = scsi_bus_match,
.suspend = scsi_bus_suspend,
.resume = scsi_bus_resume,
};
int scsi_sysfs_register(void)

View File

@ -141,6 +141,8 @@ enum {
ATA_CMD_PACKET = 0xA0,
ATA_CMD_VERIFY = 0x40,
ATA_CMD_VERIFY_EXT = 0x42,
ATA_CMD_STANDBYNOW1 = 0xE0,
ATA_CMD_IDLEIMMEDIATE = 0xE1,
ATA_CMD_INIT_DEV_PARAMS = 0x91,
/* SETFEATURES stuff */

View File

@ -124,6 +124,8 @@ enum {
ATA_FLAG_DEBUGMSG = (1 << 10),
ATA_FLAG_NO_ATAPI = (1 << 11), /* No ATAPI support */
ATA_FLAG_SUSPENDED = (1 << 12), /* port is suspended */
ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */
ATA_QCFLAG_SINGLE = (1 << 4), /* no s/g, just a single buffer */
@ -436,6 +438,8 @@ extern void ata_std_ports(struct ata_ioports *ioaddr);
extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
unsigned int n_ports);
extern void ata_pci_remove_one (struct pci_dev *pdev);
extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state);
extern int ata_pci_device_resume(struct pci_dev *pdev);
#endif /* CONFIG_PCI */
extern int ata_device_add(const struct ata_probe_ent *ent);
extern void ata_host_set_remove(struct ata_host_set *host_set);
@ -445,6 +449,10 @@ extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmn
extern int ata_scsi_error(struct Scsi_Host *host);
extern int ata_scsi_release(struct Scsi_Host *host);
extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
extern int ata_scsi_device_resume(struct scsi_device *);
extern int ata_scsi_device_suspend(struct scsi_device *);
extern int ata_device_resume(struct ata_port *, struct ata_device *);
extern int ata_device_suspend(struct ata_port *, struct ata_device *);
extern int ata_ratelimit(void);
/*

View File

@ -295,6 +295,12 @@ struct scsi_host_template {
*/
int (*proc_info)(struct Scsi_Host *, char *, char **, off_t, int, int);
/*
* suspend support
*/
int (*resume)(struct scsi_device *);
int (*suspend)(struct scsi_device *);
/*
* Name of proc directory
*/