ARM: pxa: use generic gpio operation instead of gpio register

Remove the code of accessing gpio register. Use the generic read
operation instead.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
This commit is contained in:
Haojian Zhuang 2011-10-17 13:37:23 +08:00
parent df664d2081
commit 9bf448c66d
2 changed files with 25 additions and 5 deletions

View file

@ -40,7 +40,9 @@ static struct gpio charger_gpios[] = {
{ CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
{ CORGI_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" },
{ CORGI_GPIO_CHRG_UKN, GPIOF_OUT_INIT_LOW, "Charger Unknown" },
{ CORGI_GPIO_AC_IN, GPIOF_IN, "Charger Detection" },
{ CORGI_GPIO_KEY_INT, GPIOF_IN, "Key Interrupt" },
{ CORGI_GPIO_WAKEUP, GPIOF_IN, "System wakeup notification" },
};
static void corgi_charger_init(void)
@ -90,7 +92,12 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm)
{
int is_resume = 0;
dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR);
dev_dbg(sharpsl_pm.dev, "PEDR = %x, GPIO_AC_IN = %d, "
"GPIO_CHRG_FULL = %d, GPIO_KEY_INT = %d, GPIO_WAKEUP = %d\n",
PEDR, gpio_get_value(CORGI_GPIO_AC_IN),
gpio_get_value(CORGI_GPIO_CHRG_FULL),
gpio_get_value(CORGI_GPIO_KEY_INT),
gpio_get_value(CORGI_GPIO_WAKEUP));
if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) {
if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
@ -124,14 +131,21 @@ static int corgi_should_wakeup(unsigned int resume_on_alarm)
static unsigned long corgi_charger_wakeup(void)
{
return ~GPLR0 & ( GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) );
unsigned long ret;
ret = (!gpio_get_value(CORGI_GPIO_AC_IN) << GPIO_bit(CORGI_GPIO_AC_IN))
| (!gpio_get_value(CORGI_GPIO_KEY_INT)
<< GPIO_bit(CORGI_GPIO_KEY_INT))
| (!gpio_get_value(CORGI_GPIO_WAKEUP)
<< GPIO_bit(CORGI_GPIO_WAKEUP));
return ret;
}
unsigned long corgipm_read_devdata(int type)
{
switch(type) {
case SHARPSL_STATUS_ACIN:
return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0);
return !gpio_get_value(CORGI_GPIO_AC_IN);
case SHARPSL_STATUS_LOCK:
return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
case SHARPSL_STATUS_CHRGFULL:

View file

@ -41,6 +41,7 @@ static int spitz_last_ac_status;
static struct gpio spitz_charger_gpios[] = {
{ SPITZ_GPIO_KEY_INT, GPIOF_IN, "Keyboard Interrupt" },
{ SPITZ_GPIO_SYNC, GPIOF_IN, "Sync" },
{ SPITZ_GPIO_AC_IN, GPIOF_IN, "Charger Detection" },
{ SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
{ SPITZ_GPIO_JK_B, GPIOF_OUT_INIT_LOW, "JK B" },
{ SPITZ_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" },
@ -169,14 +170,19 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
static unsigned long spitz_charger_wakeup(void)
{
return (~GPLR0 & GPIO_bit(SPITZ_GPIO_KEY_INT)) | (GPLR0 & GPIO_bit(SPITZ_GPIO_SYNC));
unsigned long ret;
ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT)
<< GPIO_bit(SPITZ_GPIO_KEY_INT))
| (!gpio_get_value(SPITZ_GPIO_SYNC)
<< GPIO_bit(SPITZ_GPIO_SYNC));
return ret;
}
unsigned long spitzpm_read_devdata(int type)
{
switch (type) {
case SHARPSL_STATUS_ACIN:
return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
return !gpio_get_value(SPITZ_GPIO_AC_IN);
case SHARPSL_STATUS_LOCK:
return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
case SHARPSL_STATUS_CHRGFULL: