ASoC: Updates for v5.16

This is an unusually large set of updates, mostly a large crop of
 unusually big drivers coupled with extensive overhauls of existing code.
 There's a SH change here for the DAI format terminology, the change is
 straightforward and the SH maintainers don't seem very active.
 
  - A new version of the audio graph card which supports a wider range of
    systems.
  - Move of the Cirrus DSP framework into drivers/firmware to allow for
    future use by non-audio DSPs.
  - Several conversions to YAML DT bindings.
  - Continuing cleanups to the SOF and Intel code.
  - A very big overhaul of the cs42l42 driver, correcting many problems.
  - Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
    MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
    Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
    RT5682S, and RT9120 and Rockchip RV1126 and RK3568
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmF/+i8ACgkQJNaLcl1U
 h9AWiAf+OoukOIBspXW3hoa7gfAhiP1bEpaforZaz0grYDT8IGBwO01JTe3qlHM2
 KLSi1k97Y33aVPjIox6ynJ9EJ+OwGfHujqFCeI1jm+QRnOCAqQx8oHaKCMzbvUpk
 rFhok4xR5XMR6NZUGQVtp5cv903r32mb0Prxvp6CXeGc6HZxcjAMYsGRBPcQoprN
 FCkiTf1qxrNQl2UmRsf8rDQmHiHpnGjiUpIUrtY9wvZGE3EQzfhQ3r1TAw7AVMmC
 YDQxjU/KftW2zTgXx+mGtu1iX0OMUBo/W8oR9RjIUUIkyA6CllScBOvQIgp9EU18
 PZPIEsyuC9zwcxHb7bPXx5E9vRsY7A==
 =/NwC
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v5.16' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.16

This is an unusually large set of updates, mostly a large crop of
unusually big drivers coupled with extensive overhauls of existing code.
There's a SH change here for the DAI format terminology, the change is
straightforward and the SH maintainers don't seem very active.

 - A new version of the audio graph card which supports a wider range of
   systems.
 - Move of the Cirrus DSP framework into drivers/firmware to allow for
   future use by non-audio DSPs.
 - Several conversions to YAML DT bindings.
 - Continuing cleanups to the SOF and Intel code.
 - A very big overhaul of the cs42l42 driver, correcting many problems.
 - Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
   MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
   Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
   RT5682S, and RT9120 and Rockchip RV1126 and RK3568

CREDITS

@@ -971,6 +971,7 @@ D: PowerPC
 N: Daniel Drake
 E: dsd@gentoo.org
 D: USBAT02 CompactFlash support in usb-storage
+D: ZD1211RW wireless driver
 S: UK
 
 N: Oleg Drokin

Documentation/admin-guide/README.rst

@@ -259,7 +259,7 @@ Configuring the kernel
 Compiling the kernel
 --------------------
 
- - Make sure you have at least gcc 4.9 available.
+ - Make sure you have at least gcc 5.1 available.
    For more information, refer to :ref:`Documentation/process/changes.rst <changes>`.
 
    Please note that you can still run a.out user programs with this kernel.

Documentation/admin-guide/cgroup-v2.rst

@@ -1226,7 +1226,7 @@ PAGE_SIZE multiple when read back.
 
 	Note that all fields in this file are hierarchical and the
 	file modified event can be generated due to an event down the
-	hierarchy. For for the local events at the cgroup level see
+	hierarchy. For the local events at the cgroup level see
 	memory.events.local.
 
 	  low
@@ -2170,19 +2170,19 @@ existing device files.
 
 Cgroup v2 device controller has no interface files and is implemented
 on top of cgroup BPF. To control access to device files, a user may
-create bpf programs of the BPF_CGROUP_DEVICE type and attach them
+create bpf programs of type BPF_PROG_TYPE_CGROUP_DEVICE and attach
-to cgroups. On an attempt to access a device file, corresponding
+them to cgroups with BPF_CGROUP_DEVICE flag. On an attempt to access a
-BPF programs will be executed, and depending on the return value
+device file, corresponding BPF programs will be executed, and depending
-the attempt will succeed or fail with -EPERM.
+on the return value the attempt will succeed or fail with -EPERM.
 
-A BPF_CGROUP_DEVICE program takes a pointer to the bpf_cgroup_dev_ctx
+A BPF_PROG_TYPE_CGROUP_DEVICE program takes a pointer to the
-structure, which describes the device access attempt: access type
+bpf_cgroup_dev_ctx structure, which describes the device access attempt:
-(mknod/read/write) and device (type, major and minor numbers).
+access type (mknod/read/write) and device (type, major and minor numbers).
-If the program returns 0, the attempt fails with -EPERM, otherwise
+If the program returns 0, the attempt fails with -EPERM, otherwise it
-it succeeds.
+succeeds.
 
-An example of BPF_CGROUP_DEVICE program may be found in the kernel
+An example of BPF_PROG_TYPE_CGROUP_DEVICE program may be found in
-source tree in the tools/testing/selftests/bpf/progs/dev_cgroup.c file.
+tools/testing/selftests/bpf/progs/dev_cgroup.c in the kernel source tree.
 
 
 RDMA

Documentation/admin-guide/kernel-parameters.txt

@@ -1266,7 +1266,7 @@
 			The VGA and EFI output is eventually overwritten by
 			the real console.
 
-			The xen output can only be used by Xen PV guests.
+			The xen option can only be used in Xen domains.
 
 			The sclp output can only be used on s390.
 

Documentation/core-api/irq/irq-domain.rst

@@ -175,9 +175,10 @@ for IRQ numbers that are passed to struct device registrations.  In that
 case the Linux IRQ numbers cannot be dynamically assigned and the legacy
 mapping should be used.
 
-As the name implies, the *_legacy() functions are deprecated and only
+As the name implies, the \*_legacy() functions are deprecated and only
 exist to ease the support of ancient platforms. No new users should be
-added.
+added. Same goes for the \*_simple() functions when their use results
+in the legacy behaviour.
 
 The legacy map assumes a contiguous range of IRQ numbers has already
 been allocated for the controller and that the IRQ number can be

Documentation/devicetree/bindings/arm/tegra.yaml

@@ -54,7 +54,7 @@ properties:
           - const: toradex,apalis_t30
           - const: nvidia,tegra30
       - items:
-          - const: toradex,apalis_t30-eval-v1.1
+          - const: toradex,apalis_t30-v1.1-eval
           - const: toradex,apalis_t30-eval
           - const: toradex,apalis_t30-v1.1
           - const: toradex,apalis_t30

Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml

@@ -50,7 +50,6 @@ properties:
               data-lanes:
                 description: array of physical DSI data lane indexes.
                 minItems: 1
-                maxItems: 4
                 items:
                   - const: 1
                   - const: 2
@@ -71,7 +70,6 @@ properties:
               data-lanes:
                 description: array of physical DSI data lane indexes.
                 minItems: 1
-                maxItems: 4
                 items:
                   - const: 1
                   - const: 2

Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml

@@ -18,7 +18,7 @@ properties:
     const: ti,sn65dsi86
 
   reg:
-    const: 0x2d
+    enum: [ 0x2c, 0x2d ]
 
   enable-gpios:
     maxItems: 1

Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt

@@ -9,7 +9,7 @@ function block.
 
 All DISP device tree nodes must be siblings to the central MMSYS_CONFIG node.
 For a description of the MMSYS_CONFIG binding, see
-Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt.
+Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml.
 
 DISP function blocks
 ====================

Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml

@@ -22,7 +22,7 @@ properties:
     items:
       - enum:
           # ili9341 240*320 Color on stm32f429-disco board
-        - st,sf-tc240t-9370-t
+          - st,sf-tc240t-9370-t
       - const: ilitek,ili9341
 
   reg: true

Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml

@@ -31,11 +31,11 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 3
+    maxItems: 7
 
   clock-names:
     minItems: 1
-    maxItems: 3
+    maxItems: 7
 
 required:
   - compatible
@@ -72,6 +72,32 @@ allOf:
           contains:
             enum:
               - qcom,sdm660-a2noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Bus Clock.
+            - description: Bus A Clock.
+            - description: IPA Clock.
+            - description: UFS AXI Clock.
+            - description: Aggregate2 UFS AXI Clock.
+            - description: Aggregate2 USB3 AXI Clock.
+            - description: Config NoC USB2 AXI Clock.
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+            - const: ipa
+            - const: ufs_axi
+            - const: aggre2_ufs_axi
+            - const: aggre2_usb3_axi
+            - const: cfg_noc_usb2_axi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,sdm660-bimc
               - qcom,sdm660-cnoc
               - qcom,sdm660-gnoc
@@ -91,6 +117,7 @@ examples:
   - |
       #include <dt-bindings/clock/qcom,rpmcc.h>
       #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
+      #include <dt-bindings/clock/qcom,gcc-sdm660.h>
 
       bimc: interconnect@1008000 {
               compatible = "qcom,sdm660-bimc";
@@ -123,9 +150,20 @@ examples:
               compatible = "qcom,sdm660-a2noc";
               reg = <0x01704000 0xc100>;
               #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
+              clock-names = "bus",
+                            "bus_a",
+                            "ipa",
+                            "ufs_axi",
+                            "aggre2_ufs_axi",
+                            "aggre2_usb3_axi",
+                            "cfg_noc_usb2_axi";
               clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-                       <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>;
+                       <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
+                       <&rpmcc RPM_SMD_IPA_CLK>,
+                       <&gcc GCC_UFS_AXI_CLK>,
+                       <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+                       <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+                       <&gcc GCC_CFG_NOC_USB2_AXI_CLK>;
       };
 
       mnoc: interconnect@1745000 {

Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml

@@ -31,7 +31,7 @@ properties:
     maxItems: 1
 
   port:
-    $ref: /schemas/graph.yaml#/properties/port
+    $ref: /schemas/graph.yaml#/$defs/port-base
     additionalProperties: false
 
     properties:

Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml

@@ -38,7 +38,7 @@ properties:
 
   port:
     additionalProperties: false
-    $ref: /schemas/graph.yaml#/properties/port
+    $ref: /schemas/graph.yaml#/$defs/port-base
 
     properties:
       endpoint:

Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml

@@ -38,7 +38,7 @@ properties:
 
   port:
     additionalProperties: false
-    $ref: /schemas/graph.yaml#/properties/port
+    $ref: /schemas/graph.yaml#/$defs/port-base
 
     properties:
       endpoint:

Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml

@@ -38,7 +38,7 @@ properties:
 
   port:
     additionalProperties: false
-    $ref: /schemas/graph.yaml#/properties/port
+    $ref: /schemas/graph.yaml#/$defs/port-base
 
     properties:
       endpoint:

Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml

@@ -20,9 +20,7 @@ properties:
       - snps,dwcmshc-sdhci
 
   reg:
-    minItems: 1
+    maxItems: 1
-    items:
-      - description: Offset and length of the register set for the device
 
   interrupts:
     maxItems: 1

Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml

@@ -19,7 +19,9 @@ properties:
       - const: allwinner,sun8i-v3s-emac
       - const: allwinner,sun50i-a64-emac
       - items:
-          - const: allwinner,sun50i-h6-emac
+          - enum:
+              - allwinner,sun20i-d1-emac
+              - allwinner,sun50i-h6-emac
           - const: allwinner,sun50i-a64-emac
 
   reg:

Documentation/devicetree/bindings/net/dsa/marvell.txt

@@ -83,7 +83,7 @@ Example:
 		#interrupt-cells = <2>;
 
 		switch0: switch@0 {
-			compatible = "marvell,mv88e6390";
+			compatible = "marvell,mv88e6190";
 			reg = <0>;
 			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
 

Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml

@@ -34,7 +34,6 @@ properties:
 
   clocks:
     minItems: 3
-    maxItems: 5
     items:
       - description: MAC host clock
       - description: MAC apb clock

Documentation/devicetree/bindings/net/snps,dwmac.yaml

@@ -21,6 +21,7 @@ select:
       contains:
         enum:
           - snps,dwmac
+          - snps,dwmac-3.40a
           - snps,dwmac-3.50a
           - snps,dwmac-3.610
           - snps,dwmac-3.70a
@@ -76,6 +77,7 @@ properties:
         - rockchip,rk3399-gmac
         - rockchip,rv1108-gmac
         - snps,dwmac
+        - snps,dwmac-3.40a
         - snps,dwmac-3.50a
         - snps,dwmac-3.610
         - snps,dwmac-3.70a

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml

@@ -41,7 +41,6 @@ properties:
       - description: builtin MSI controller.
 
   interrupt-names:
-    minItems: 1
     items:
       - const: msi
 

Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt

@@ -1,134 +0,0 @@
-Qualcomm APR (Asynchronous Packet Router) binding
-
-This binding describes the Qualcomm APR. APR is a IPC protocol for
-communication between Application processor and QDSP. APR is mainly
-used for audio/voice services on the QDSP.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,apr-v<VERSION-NUMBER>", example "qcom,apr-v2"
-
-- qcom,apr-domain
-	Usage: required
-	Value type: <u32>
-	Definition: Destination processor ID.
-	Possible values are :
-			1 - APR simulator
-			2 - PC
-			3 - MODEM
-			4 - ADSP
-			5 - APPS
-			6 - MODEM2
-			7 - APPS2
-
-= APR SERVICES
-Each subnode of the APR node represents service tied to this apr. The name
-of the nodes are not important. The properties of these nodes are defined
-by the individual bindings for the specific service
-- All APR services MUST contain the following property:
-
-- reg
-	Usage: required
-	Value type: <u32>
-	Definition: APR Service ID
-	Possible values are :
-			3 - DSP Core Service
-			4 - Audio Front End Service.
-			5 - Voice Stream Manager Service.
-			6 - Voice processing manager.
-			7 - Audio Stream Manager Service.
-			8 - Audio Device Manager Service.
-			9 - Multimode voice manager.
-			10 - Core voice stream.
-			11 - Core voice processor.
-			12 - Ultrasound stream manager.
-			13 - Listen stream manager.
-
-- qcom,protection-domain
-	Usage: optional
-	Value type: <stringlist>
-	Definition: Must list the protection domain service name and path
-		    that the particular apr service has a dependency on.
-	Possible values are :
-			"avs/audio", "msm/adsp/audio_pd".
-			"kernel/elf_loader", "msm/modem/wlan_pd".
-			"tms/servreg", "msm/adsp/audio_pd".
-			"tms/servreg", "msm/modem/wlan_pd".
-			"tms/servreg", "msm/slpi/sensor_pd".
-
-= EXAMPLE
-The following example represents a QDSP based sound card on a MSM8996 device
-which uses apr as communication between Apps and QDSP.
-
-	apr {
-		compatible = "qcom,apr-v2";
-		qcom,apr-domain = <APR_DOMAIN_ADSP>;
-
-		apr-service@3 {
-			compatible = "qcom,q6core";
-			reg = <APR_SVC_ADSP_CORE>;
-		};
-
-		apr-service@4 {
-			compatible = "qcom,q6afe";
-			reg = <APR_SVC_AFE>;
-
-			dais {
-				#sound-dai-cells = <1>;
-				dai@1 {
-					reg = <HDMI_RX>;
-				};
-			};
-		};
-
-		apr-service@7 {
-			compatible = "qcom,q6asm";
-			reg = <APR_SVC_ASM>;
-			...
-		};
-
-		apr-service@8 {
-			compatible = "qcom,q6adm";
-			reg = <APR_SVC_ADM>;
-			...
-		};
-	};
-
-= EXAMPLE 2
-The following example represents a QDSP based sound card with protection domain
-dependencies specified. Here some of the apr services are dependent on services
-running on protection domain hosted on ADSP/SLPI remote processors while others
-have no such dependency.
-
-	apr {
-		compatible = "qcom,apr-v2";
-		qcom,glink-channels = "apr_audio_svc";
-		qcom,apr-domain = <APR_DOMAIN_ADSP>;
-
-		apr-service@3 {
-			compatible = "qcom,q6core";
-			reg = <APR_SVC_ADSP_CORE>;
-		};
-
-		q6afe: apr-service@4 {
-			compatible = "qcom,q6afe";
-			reg = <APR_SVC_AFE>;
-			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-			...
-		};
-
-		q6asm: apr-service@7 {
-			compatible = "qcom,q6asm";
-			reg = <APR_SVC_ASM>;
-			qcom,protection-domain = "tms/servreg", "msm/slpi/sensor_pd";
-			...
-		};
-
-		q6adm: apr-service@8 {
-			compatible = "qcom,q6adm";
-			reg = <APR_SVC_ADM>;
-			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-			...
-		};
-	};

Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml

@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,apr.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm APR/GPR (Asynchronous/Generic Packet Router) binding
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Qualcomm APR/GPR, APR/GPR is a IPC protocol for
+  communication between Application processor and QDSP. APR/GPR is mainly
+  used for audio/voice services on the QDSP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,apr-v2
+      - qcom,gpr
+
+  qcom,apr-domain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3, 4, 5, 6, 7]
+    description:
+      Selects the processor domain for apr
+        1 = APR simulator
+        2 = PC Domain
+        3 = Modem Domain
+        4 = ADSP Domain
+        5 = Application processor Domain
+        6 = Modem2 Domain
+        7 = Application Processor2 Domain
+    deprecated: true
+
+  qcom,domain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 7
+    description:
+      Selects the processor domain for apr
+        1 = APR simulator
+        2 = PC Domain
+        3 = Modem Domain
+        4 = ADSP Domain
+        5 = Application processor Domain
+        6 = Modem2 Domain
+        7 = Application Processor2 Domain
+      Selects the processor domain for gpr
+        1 = Modem Domain
+        2 = Audio DSP Domain
+        3 = Application Processor Domain
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+#APR/GPR Services
+patternProperties:
+  "^service@[1-9a-d]$":
+    type: object
+    description:
+      APR/GPR node's client devices use subnodes for desired static port services.
+
+    properties:
+      compatible:
+        enum:
+          - qcom,q6core
+          - qcom,q6asm
+          - qcom,q6afe
+          - qcom,q6adm
+          - qcom,q6apm
+          - qcom,q6prm
+
+      reg:
+        minimum: 1
+        maximum: 13
+        description:
+          APR Service ID
+            3 = DSP Core Service
+            4 = Audio  Front End Service.
+            5 = Voice Stream Manager Service.
+            6 = Voice processing manager.
+            7 = Audio Stream Manager Service.
+            8 = Audio Device Manager Service.
+            9 = Multimode voice manager.
+            10 = Core voice stream.
+            11 = Core voice processor.
+            12 = Ultrasound stream manager.
+            13 = Listen stream manager.
+          GPR Service ID
+            1 = Audio Process Manager Service
+            2 = Proxy Resource Manager Service.
+            3 = AMDB Service.
+            4 = Voice processing manager.
+
+      qcom,protection-domain:
+        $ref: /schemas/types.yaml#/definitions/string-array
+        description: protection domain service name and path for apr service
+          possible values are
+          "avs/audio", "msm/adsp/audio_pd".
+          "kernel/elf_loader", "msm/modem/wlan_pd".
+          "tms/servreg", "msm/adsp/audio_pd".
+          "tms/servreg", "msm/modem/wlan_pd".
+          "tms/servreg", "msm/slpi/sensor_pd".
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^.*@[0-9a-f]+$":
+        type: object
+        description:
+          Service based devices like clock controllers or digital audio interfaces.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - qcom,domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+    apr {
+        compatible = "qcom,apr-v2";
+        qcom,domain = <APR_DOMAIN_ADSP>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        q6core: service@3 {
+          compatible = "qcom,q6core";
+          reg = <APR_SVC_ADSP_CORE>;
+          qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+        };
+
+        q6afe: service@4 {
+          compatible = "qcom,q6afe";
+          reg = <APR_SVC_AFE>;
+          qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+        };
+
+        q6asm: service@7 {
+          compatible = "qcom,q6asm";
+          reg = <APR_SVC_ASM>;
+          qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+        };
+
+        q6adm: service@8 {
+          compatible = "qcom,q6adm";
+          reg = <APR_SVC_ADM>;
+          qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+        };
+    };
+
+  - |
+    #include <dt-bindings/soc/qcom,gpr.h>
+    gpr {
+        compatible = "qcom,gpr";
+        qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@1 {
+          compatible = "qcom,q6apm";
+          reg = <GPR_APM_MODULE_IID>;
+          qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+        };
+    };

Documentation/devicetree/bindings/sound/amlogic,t9015.yaml

@@ -34,6 +34,10 @@ properties:
   resets:
     maxItems: 1
 
+  AVDD-supply:
+    description:
+      Analogue power supply.
+
 required:
   - "#sound-dai-cells"
   - compatible
@@ -41,6 +45,7 @@ required:
   - clocks
   - clock-names
   - resets
+  - AVDD-supply
 
 additionalProperties: false
 
@@ -56,4 +61,5 @@ examples:
         clocks = <&clkc CLKID_AUDIO_CODEC>;
         clock-names = "pclk";
         resets = <&reset RESET_AUDIO_CODEC>;
+        AVDD-supply = <&vddao_1v8>;
     };

Documentation/devicetree/bindings/sound/audio-graph-card2.yaml

@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph-card2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph Card2 Device Tree Bindings
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+  compatible:
+    enum:
+      - audio-graph-card2
+  links:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+  label:
+    maxItems: 1
+  routing:
+    description: |
+      A list of the connections between audio components.
+      Each entry is a pair of strings, the first being the
+      connection's sink, the second being the connection's source.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+  multi:
+    description: Multi-CPU/Codec node
+  dpcm:
+    description: DPCM node
+  codec2codec:
+    description: Codec to Codec node
+
+required:
+  - compatible
+  - links
+
+additionalProperties: false
+
+examples:
+  - |
+    sound {
+        compatible = "audio-graph-card2";
+
+        links = <&cpu_port>;
+    };
+
+    cpu {
+        compatible = "cpu-driver";
+
+        cpu_port: port { cpu_ep: endpoint { remote-endpoint = <&codec_ep>; }; };
+    };
+
+    codec {
+        compatible = "codec-driver";
+
+        port { codec_ep: endpoint { remote-endpoint = <&cpu_ep>; }; };
+    };

Documentation/devicetree/bindings/sound/bt-sco.txt

@@ -1,13 +0,0 @@
-Bluetooth-SCO audio CODEC
-
-This device support generic Bluetooth SCO link.
-
-Required properties:
-
-  - compatible : "delta,dfbmcs320" or "linux,bt-sco"
-
-Example:
-
-codec: bt_sco {
-	compatible = "delta,dfbmcs320";
-};

Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml

@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs35l41.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS35L41 Speaker Amplifier
+
+maintainers:
+  - david.rhodes@cirrus.com
+
+description: |
+  CS35L41 is a boosted mono Class D amplifier with DSP
+  speaker protection and equalization
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs35l40
+      - cirrus,cs35l41
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    description:
+      The first cell indicating the audio interface.
+    const: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  VA-supply:
+    description: voltage regulator phandle for the VA supply
+
+  VP-supply:
+    description: voltage regulator phandle for the VP supply
+
+  cirrus,boost-peak-milliamp:
+    description:
+      Boost-converter peak current limit in mA.
+      Configures the peak current by monitoring the current through the boost FET.
+      Range starts at 1600 mA and goes to a maximum of 4500 mA with increments
+      of 50 mA. See section 4.3.6 of the datasheet for details.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 1600
+    maximum: 4500
+    default: 4500
+
+  cirrus,boost-ind-nanohenry:
+    description:
+      Boost inductor value, expressed in nH. Valid
+      values include 1000, 1200, 1500 and 2200.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 1000
+    maximum: 2200
+
+  cirrus,boost-cap-microfarad:
+    description:
+      Total equivalent boost capacitance on the VBST
+      and VAMP pins, derated at 11 volts DC. The value must be rounded to the
+      nearest integer and expressed in uF.
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+
+  cirrus,asp-sdout-hiz:
+    description:
+      Audio serial port SDOUT Hi-Z control. Sets the Hi-Z
+      configuration for SDOUT pin of amplifier.
+      0 = Logic 0 during unused slots, and while all transmit channels disabled
+      1 = Hi-Z during unused slots but logic 0 while all transmit channels disabled
+      2 = (Default) Logic 0 during unused slots, but Hi-Z while all transmit channels disabled
+      3 = Hi-Z during unused slots and while all transmit channels disabled
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 3
+    default: 2
+
+  cirrus,gpio1-polarity-invert:
+    description:
+      Boolean which specifies whether the GPIO1
+      level is inverted. If this property is not present the level is not inverted.
+    type: boolean
+
+  cirrus,gpio1-output-enable:
+    description:
+      Boolean which specifies whether the GPIO1 pin
+      is configured as an output. If this property is not present the
+      pin will be configured as an input.
+    type: boolean
+
+  cirrus,gpio1-src-select:
+    description:
+      Configures the function of the GPIO1 pin.
+      Note that the options are different from the GPIO2 pin
+      0 = High Impedance (Default)
+      1 = GPIO
+      2 = Sync
+      3 = MCLK input
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 3
+
+  cirrus,gpio2-polarity-invert:
+    description:
+      Boolean which specifies whether the GPIO2
+      level is inverted. If this property is not present the level is not inverted.
+    type: boolean
+
+  cirrus,gpio2-output-enable:
+    description:
+      Boolean which specifies whether the GPIO2 pin
+      is configured as an output. If this property is not present the
+      pin will be configured as an input.
+    type: boolean
+
+  cirrus,gpio2-src-select:
+    description:
+      Configures the function of the GPIO2 pin.
+      Note that the options are different from the GPIO1 pin.
+      0 = High Impedance (Default)
+      1 = GPIO
+      2 = Open Drain INTB
+      3 = MCLK input
+      4 = Push-pull INTB (active low)
+      5 = Push-pull INT (active high)
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 5
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+  - cirrus,boost-peak-milliamp
+  - cirrus,boost-ind-nanohenry
+  - cirrus,boost-cap-microfarad
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cs35l41: cs35l41@2 {
+          #sound-dai-cells = <1>;
+          compatible = "cirrus,cs35l41";
+          reg = <2>;
+          VA-supply = <&dummy_vreg>;
+          VP-supply = <&dummy_vreg>;
+          reset-gpios = <&gpio 110 0>;
+          cirrus,boost-peak-milliamp = <4500>;
+          cirrus,boost-ind-nanohenry = <1000>;
+          cirrus,boost-cap-microfarad = <15>;
+        };
+    };

Documentation/devicetree/bindings/sound/cs42l42.txt

@@ -19,13 +19,14 @@ Optional properties:
   (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
   for further information relating to interrupt properties)
 
-  - cirrus,ts-inv : Boolean property. For jacks that invert the tip sense
+  - cirrus,ts-inv : Boolean property. Sets the behaviour of the jack plug
-  polarity. Normal jacks will short tip sense pin to HS1 when headphones are
+  detect switch.
-  plugged in and leave tip sense floating when not plugged in. Inverting jacks
-  short tip sense when unplugged and float when plugged in.
 
-  0 = (Default) Non-inverted
+  0 = (Default) Shorted to tip when unplugged, open when plugged.
-  1 = Inverted
+      This is "inverted tip sense (ITS)" in the datasheet.
+
+  1 = Open when unplugged, shorted to tip when plugged.
+      This is "normal tip sense (TS)" in the datasheet.
 
   - cirrus,ts-dbnc-rise : Debounce the rising edge of TIP_SENSE_PLUG. With no
   debounce, the tip sense pin might be noisy on a plug event.

Documentation/devicetree/bindings/sound/linux,bt-sco.yaml

@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/linux,bt-sco.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bluetooth SCO Audio Codec Device Tree Bindings
+
+maintainers:
+  - Mark Brown <broonie@kernel.org>
+
+properties:
+  '#sound-dai-cells':
+    enum:
+      - 0
+
+      # For Wideband PCM
+      - 1
+
+  compatible:
+    enum:
+      - delta,dfbmcs320
+      - linux,bt-sco
+
+required:
+  - '#sound-dai-cells'
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    codec {
+        #sound-dai-cells = <0>;
+        compatible = "linux,bt-sco";
+    };
+
+...

Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml

@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/linux,spdif-dit.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dummy SPDIF Transmitter Device Tree Bindings
+
+maintainers:
+  - Mark Brown <broonie@kernel.org>
+
+properties:
+  compatible:
+    const: linux,spdif-dit
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - "#sound-dai-cells"
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    spdif-out {
+        #sound-dai-cells = <0>;
+        compatible = "linux,spdif-dit";
+    };
+
+...

Documentation/devicetree/bindings/sound/max9892x.txt

@@ -30,6 +30,9 @@ Required properties:
 
   - reg : the I2C address of the device for I2C
 
+Optional properties:
+  - reset-gpios : GPIO to reset the device
+
 Example:
 
 codec: max98927@3a {

Documentation/devicetree/bindings/sound/maxim,max98520.yaml

@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/maxim,max98520.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX98520 Speaker Amplifier Driver
+
+maintainers:
+  - George Song <george.song@maximintegrated.com>
+
+properties:
+  compatible:
+    const: maxim,max98520
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      max98520: amplifier@38 {
+        compatible = "maxim,max98520";
+        reg = <0x38>;
+      };
+    };
+

Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml

@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8192-afe-pcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek AFE PCM controller for mt8192
+
+maintainers:
+  - Jiaxin Yu <jiaxin.yu@mediatek.com>
+  - Shane Chien <shane.chien@mediatek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt8192-audio
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: audiosys
+
+  mediatek,apmixedsys:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of the mediatek apmixedsys controller
+
+  mediatek,infracfg:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of the mediatek infracfg controller
+
+  mediatek,topckgen:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of the mediatek topckgen controller
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AFE clock
+      - description: ADDA DAC clock
+      - description: ADDA DAC pre-distortion clock
+      - description: audio infra sys clock
+      - description: audio infra 26M clock
+
+  clock-names:
+    items:
+      - const: aud_afe_clk
+      - const: aud_dac_clk
+      - const: aud_dac_predis_clk
+      - const: aud_infra_clk
+      - const: aud_infra_26m_clk
+
+required:
+  - compatible
+  - interrupts
+  - resets
+  - reset-names
+  - mediatek,apmixedsys
+  - mediatek,infracfg
+  - mediatek,topckgen
+  - power-domains
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8192-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt8192-power.h>
+    #include <dt-bindings/reset/mt8192-resets.h>
+
+    afe: mt8192-afe-pcm {
+        compatible = "mediatek,mt8192-audio";
+        interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&watchdog MT8192_TOPRGU_AUDIO_SW_RST>;
+        reset-names = "audiosys";
+        mediatek,apmixedsys = <&apmixedsys>;
+        mediatek,infracfg = <&infracfg>;
+        mediatek,topckgen = <&topckgen>;
+        power-domains = <&scpsys MT8192_POWER_DOMAIN_AUDIO>;
+        clocks = <&audsys CLK_AUD_AFE>,
+                 <&audsys CLK_AUD_DAC>,
+                 <&audsys CLK_AUD_DAC_PREDIS>,
+                 <&infracfg CLK_INFRA_AUDIO>,
+                 <&infracfg CLK_INFRA_AUDIO_26M_B>;
+        clock-names = "aud_afe_clk",
+                      "aud_dac_clk",
+                      "aud_dac_predis_clk",
+                      "aud_infra_clk",
+                      "aud_infra_26m_clk";
+    };
+
+...

Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1011-rt5682.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8195-mt6359-rt1011-rt5682.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8195 with MT6359, RT1011 and RT5682 ASoC sound card driver
+
+maintainers:
+  - Trevor Wu <trevor.wu@mediatek.com>
+
+description:
+  This binding describes the MT8195 sound card with RT1011 and RT5682.
+
+properties:
+  compatible:
+    const: mediatek,mt8195_mt6359_rt1011_rt5682
+
+  mediatek,platform:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8195 ASoC platform.
+
+  mediatek,dptx-codec:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8195 Display Port Tx codec node.
+
+  mediatek,hdmi-codec:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8195 HDMI codec node.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mediatek,platform
+
+examples:
+  - |
+
+    sound: mt8195-sound {
+        compatible = "mediatek,mt8195_mt6359_rt1011_rt5682";
+        mediatek,platform = <&afe>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&aud_pins_default>;
+    };
+
+...

Documentation/devicetree/bindings/sound/name-prefix.txt

@@ -1,24 +0,0 @@
-Name prefix:
-
-Card implementing the routing property define the connection between
-audio components as list of string pair. Component using the same
-sink/source names may use the name prefix property to prepend the
-name of their sinks/sources with the provided string.
-
-Optional name prefix property:
-- sound-name-prefix : string using as prefix for the sink/source names of
-		      the component.
-
-Example: Two instances of the same component.
-
-amp0: analog-amplifier@0 {
-	compatible = "simple-audio-amplifier";
-	enable-gpios = <&gpio GPIOH_3 0>;
-	sound-name-prefix = "FRONT";
-};
-
-amp1: analog-amplifier@1 {
-	compatible = "simple-audio-amplifier";
-	enable-gpios = <&gpio GPIOH_4 0>;
-	sound-name-prefix = "BACK";
-};

Documentation/devicetree/bindings/sound/name-prefix.yaml

@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/name-prefix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Component sound name prefix
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  sound-name-prefix:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      Card implementing the routing property define the connection between
+      audio components as list of string pair. Component using the same
+      sink/source names may use this property to prepend the name of their
+      sinks/sources with the provided string.
+
+additionalProperties: true

Documentation/devicetree/bindings/sound/nau8821.txt

@@ -0,0 +1,55 @@
+Nuvoton NAU88L21 audio codec
+
+This device supports I2C only.
+
+Required properties:
+  - compatible : Must be "nuvoton,nau8821"
+
+  - reg : the I2C address of the device. This is either 0x1B (CSB=0) or 0x54 (CSB=1).
+
+Optional properties:
+  - nuvoton,jkdet-enable: Enable jack detection via JKDET pin.
+  - nuvoton,jkdet-pull-enable: Enable JKDET pin pull. If set - pin pull enabled,
+      otherwise pin in high impedance state.
+  - nuvoton,jkdet-pull-up: Pull-up JKDET pin. If set then JKDET pin is pull up, otherwise pull down.
+  - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low.
+
+  - nuvoton,vref-impedance: VREF Impedance selection
+      0 - Open
+      1 - 25 kOhm
+      2 - 125 kOhm
+      3 - 2.5 kOhm
+
+  - nuvoton,micbias-voltage: Micbias voltage level.
+      0 - VDDA
+      1 - VDDA
+      2 - VDDA * 1.1
+      3 - VDDA * 1.2
+      4 - VDDA * 1.3
+      5 - VDDA * 1.4
+      6 - VDDA * 1.53
+      7 - VDDA * 1.53
+
+  - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
+  - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms
+
+  - nuvoton,dmic-clk-threshold: the ADC threshold of DMIC clock.
+
+
+Example:
+
+  headset: nau8821@1b {
+      compatible = "nuvoton,nau8821";
+      reg = <0x1b>;
+      interrupt-parent = <&gpio>;
+      interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+      nuvoton,jkdet-enable;
+      nuvoton,jkdet-pull-enable;
+      nuvoton,jkdet-pull-up;
+      nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
+      nuvoton,vref-impedance = <2>;
+      nuvoton,micbias-voltage = <6>;
+      nuvoton,jack-insert-debounce = <7>;
+      nuvoton,jack-eject-debounce = <7>;
+      nuvoton,dmic-clk-threshold = 3072000;
+  };

Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml

@@ -17,6 +17,9 @@ maintainers:
   - Jon Hunter <jonathanh@nvidia.com>
   - Sameer Pujar <spujar@nvidia.com>
 
+allOf:
+  - $ref: name-prefix.yaml#
+
 properties:
   $nodename:
     pattern: "^dspk@[0-9a-f]*$"
@@ -48,12 +51,6 @@ properties:
 
   sound-name-prefix:
     pattern: "^DSPK[1-9]$"
-    $ref: /schemas/types.yaml#/definitions/string
-    description:
-      Used as prefix for sink/source names of the component. Must be a
-      unique string among multiple instances of the same component.
-      The name can be "DSPK1" or "DSPKx", where x depends on the maximum
-      available instances on a Tegra SoC.
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports

Documentation/devicetree/bindings/sound/nvidia,tegra210-adx.yaml

@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-adx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 ADX Device Tree Bindings
+
+description: |
+  The Audio Demultiplexer (ADX) block takes an input stream with up to
+  16 channels and demultiplexes it into four output streams of up to 16
+  channels each. A byte RAM helps to form output frames by any combination
+  of bytes from the input frame. Its design is identical to that of byte
+  RAM in the AMX except that the data flow direction is reversed.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^adx@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-adx
+      - items:
+          - enum:
+              - nvidia,tegra194-adx
+              - nvidia,tegra186-adx
+          - const: nvidia,tegra210-adx
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^ADX[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      ADX has one input and four outputs. Accordingly ACIF (Audio Client
+      Interface) port nodes are defined to represent ADX input (port 0)
+      and outputs (ports 1 to 4). These are connected to corresponding
+      ports on AHUB (Audio Hub).
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: ADX ACIF input port
+    patternProperties:
+      '^port@[1-4]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: ADX ACIF output ports
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    adx@702d3800 {
+        compatible = "nvidia,tegra210-adx";
+        reg = <0x702d3800 0x100>;
+        sound-name-prefix = "ADX1";
+    };
+
+...

Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml

@@ -85,6 +85,26 @@ patternProperties:
     type: object
     $ref: nvidia,tegra186-dspk.yaml#
 
+  '^mvc@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-mvc.yaml#
+
+  '^sfc@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-sfc.yaml#
+
+  '^amx@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-amx.yaml#
+
+  '^adx@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-adx.yaml#
+
+  '^amixer@[0-9a-f]+$':
+    type: object
+    $ref: nvidia,tegra210-mixer.yaml#
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/sound/nvidia,tegra210-amx.yaml

@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-amx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 AMX Device Tree Bindings
+
+description: |
+  The Audio Multiplexer (AMX) block can multiplex up to four input streams
+  each of which can have maximum 16 channels and generate an output stream
+  with maximum 16 channels. A byte RAM helps to form an output frame by
+  any combination of bytes from the input frames.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^amx@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-amx
+      - items:
+          - const: nvidia,tegra186-amx
+          - const: nvidia,tegra210-amx
+      - const: nvidia,tegra194-amx
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^AMX[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      AMX has four inputs and one output. Accordingly ACIF (Audio Client
+      Interfaces) port nodes are defined to represent AMX inputs (port 0
+      to 3) and output (port 4). These are connected to corresponding
+      ports on AHUB (Audio Hub).
+
+    patternProperties:
+      '^port@[0-3]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: AMX ACIF input ports
+
+    properties:
+      port@4:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: AMX ACIF output port
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    amx@702d3000 {
+        compatible = "nvidia,tegra210-amx";
+        reg = <0x702d3000 0x100>;
+        sound-name-prefix = "AMX1";
+    };
+
+...

Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml

@@ -16,6 +16,9 @@ maintainers:
   - Jon Hunter <jonathanh@nvidia.com>
   - Sameer Pujar <spujar@nvidia.com>
 
+allOf:
+  - $ref: name-prefix.yaml#
+
 properties:
   $nodename:
     pattern: "^dmic@[0-9a-f]*$"
@@ -49,12 +52,6 @@ properties:
 
   sound-name-prefix:
     pattern: "^DMIC[1-9]$"
-    $ref: /schemas/types.yaml#/definitions/string
-    description:
-      used as prefix for sink/source names of the component. Must be a
-      unique string among multiple instances of the same component.
-      The name can be "DMIC1" or "DMIC2" ... "DMICx", where x depends
-      on the maximum available instances on a Tegra SoC.
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports

Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml

@@ -16,6 +16,9 @@ maintainers:
   - Jon Hunter <jonathanh@nvidia.com>
   - Sameer Pujar <spujar@nvidia.com>
 
+allOf:
+  - $ref: name-prefix.yaml#
+
 properties:
   $nodename:
     pattern: "^i2s@[0-9a-f]*$"
@@ -65,12 +68,6 @@ properties:
 
   sound-name-prefix:
     pattern: "^I2S[1-9]$"
-    $ref: /schemas/types.yaml#/definitions/string
-    description:
-      Used as prefix for sink/source names of the component. Must be a
-      unique string among multiple instances of the same component.
-      The name can be "I2S1" or "I2S2" ... "I2Sx", where x depends
-      on the maximum available instances on a Tegra SoC.
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports

Documentation/devicetree/bindings/sound/nvidia,tegra210-mixer.yaml

@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mixer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 Mixer Device Tree Bindings
+
+description: |
+  The Mixer supports mixing of up to ten 7.1 audio input streams and
+  generate five outputs (each of which can be any combination of the
+  ten input streams).
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^amixer@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-amixer
+      - items:
+          - enum:
+              - nvidia,tegra194-amixer
+              - nvidia,tegra186-amixer
+          - const: nvidia,tegra210-amixer
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^MIXER[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Mixer has ten inputs and five outputs. Accordingly ACIF (Audio
+      Client Interfaces) port nodes are defined to represent Mixer
+      inputs (port 0 to 9) and outputs (port 10 to 14). These are
+      connected to corresponding ports on AHUB (Audio Hub).
+
+    patternProperties:
+      '^port@[0-9]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: Mixer ACIF input ports
+      '^port@[10-14]':
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: Mixer ACIF output ports
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    amixer@702dbb00 {
+        compatible = "nvidia,tegra210-amixer";
+        reg = <0x702dbb00 0x800>;
+        sound-name-prefix = "MIXER1";
+    };
+
+...

Documentation/devicetree/bindings/sound/nvidia,tegra210-mvc.yaml

@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-mvc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 MVC Device Tree Bindings
+
+description: |
+  The Master Volume Control (MVC) provides gain or attenuation to a digital
+  signal path. It can be used in input or output signal path for per-stream
+  volume control or it can be used as master volume control. The MVC block
+  has one input and one output. The input digital stream can be mono or
+  multi-channel (up to 7.1 channels) stream. An independent mute control is
+  also included in the MVC block.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^mvc@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-mvc
+      - items:
+          - enum:
+              - nvidia,tegra194-mvc
+              - nvidia,tegra186-mvc
+          - const: nvidia,tegra210-mvc
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^MVC[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          MVC ACIF (Audio Client Interface) input port. This is connected
+          to corresponding ACIF output port on AHUB (Audio Hub).
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          MVC ACIF output port. This is connected to corresponding ACIF
+          input port on AHUB.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    mvc@702da000 {
+        compatible = "nvidia,tegra210-mvc";
+        reg = <0x702da000 0x200>;
+        sound-name-prefix = "MVC1";
+    };
+
+...

Documentation/devicetree/bindings/sound/nvidia,tegra210-sfc.yaml

@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nvidia,tegra210-sfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra210 SFC Device Tree Bindings
+
+description: |
+  The Sampling Frequency Converter (SFC) converts the sampling frequency
+  of the input signal from one frequency to another. It supports sampling
+  frequency conversions of streams of up to two channels (stereo).
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Mohan Kumar <mkumard@nvidia.com>
+  - Sameer Pujar <spujar@nvidia.com>
+
+allOf:
+  - $ref: name-prefix.yaml#
+
+properties:
+  $nodename:
+    pattern: "^sfc@[0-9a-f]*$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra210-sfc
+      - items:
+          - enum:
+              - nvidia,tegra194-sfc
+              - nvidia,tegra186-sfc
+          - const: nvidia,tegra210-sfc
+
+  reg:
+    maxItems: 1
+
+  sound-name-prefix:
+    pattern: "^SFC[1-9]$"
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          SFC ACIF (Audio Client Interface) input port. This is connected
+          to corresponding ACIF output port on AHUB (Audio Hub).
+
+      port@1:
+        $ref: audio-graph-port.yaml#
+        unevaluatedProperties: false
+        description: |
+          SFC ACIF output port. This is connected to corresponding ACIF
+          input port on AHUB.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    sfc@702d2000 {
+        compatible = "nvidia,tegra210-sfc";
+        reg = <0x702d2000 0x200>;
+        sound-name-prefix = "SFC1";
+    };
+
+...

Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml

@@ -9,6 +9,9 @@ title: NXP/Goodix TFA989X (TFA1) Audio Amplifiers
 maintainers:
   - Stephan Gerhold <stephan@gerhold.net>
 
+allOf:
+  - $ref: name-prefix.yaml#
+
 properties:
   compatible:
     enum:
@@ -21,11 +24,7 @@ properties:
   '#sound-dai-cells':
     const: 0
 
-  sound-name-prefix:
+  sound-name-prefix: true
-    $ref: /schemas/types.yaml#/definitions/string
-    description:
-      Used as prefix for sink/source names of the component. Must be a
-      unique string among multiple instances of the same component.
 
   vddd-supply:
     description: regulator phandle for the VDDD power supply.

Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml

@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: qcom,sm8250-lpass-rx-macro
+    enum:
+      - qcom,sc7280-lpass-rx-macro
+      - qcom,sm8250-lpass-rx-macro
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml

@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: qcom,sm8250-lpass-tx-macro
+    enum:
+      - qcom,sc7280-lpass-tx-macro
+      - qcom,sm8250-lpass-tx-macro
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml

@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: qcom,sm8250-lpass-va-macro
+    enum:
+      - qcom,sc7280-lpass-va-macro
+      - qcom,sm8250-lpass-va-macro
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml

@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: qcom,sm8250-lpass-wsa-macro
+    enum:
+      - qcom,sc7280-lpass-wsa-macro
+      - qcom,sm8250-lpass-wsa-macro
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/sound/qcom,q6afe.txt

@@ -12,190 +12,9 @@ used by all apr services. Must contain the following properties.
 		  from DSP.
 		  example "qcom,q6afe"
 
-= AFE DAIs (Digial Audio Interface)
-"dais" subnode of the AFE node. It represents afe dais, each afe dai is a
-subnode of "dais" representing board specific dai setup.
-"dais" node should have following properties followed by dai children.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,q6afe-dais"
-
-- #sound-dai-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 1
-
-- #address-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 1
-
-- #size-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 0
-
-== AFE DAI is subnode of "dais" and represent a dai, it includes board specific
-configuration of each dai. Must contain the following properties.
-
-- reg
-	Usage: required
-	Value type: <u32>
-	Definition: Must be dai id
-
-- qcom,sd-lines
-	Usage: required for mi2s interface
-	Value type: <prop-encoded-array>
-	Definition: Must be list of serial data lines used by this dai.
-	should be one or more of the 0-3 sd lines.
-
- - qcom,tdm-sync-mode:
-	Usage: required for tdm interface
-	Value type: <prop-encoded-array>
-	Definition: Synchronization mode.
-		0 - Short sync bit mode
-		1 - Long sync mode
-		2 - Short sync slot mode
-
- - qcom,tdm-sync-src:
-	Usage: required for tdm interface
-	Value type: <prop-encoded-array>
-	Definition: Synchronization source.
-		0 - External source
-		1 - Internal source
-
- - qcom,tdm-data-out:
-	Usage: required for tdm interface
-	Value type: <prop-encoded-array>
-	Definition: Data out signal to drive with other masters.
-		0 - Disable
-		1 - Enable
-
- - qcom,tdm-invert-sync:
-	Usage: required for tdm interface
-	Value type: <prop-encoded-array>
-	Definition: Invert the sync.
-		0 - Normal
-		1 - Invert
-
- - qcom,tdm-data-delay:
-	Usage: required for tdm interface
-	Value type: <prop-encoded-array>
-	Definition: Number of bit clock to delay data
-		with respect to sync edge.
-		0 - 0 bit clock cycle
-		1 - 1 bit clock cycle
-		2 - 2 bit clock cycle
-
- - qcom,tdm-data-align:
-	Usage: required for tdm interface
-	Value type: <prop-encoded-array>
-	Definition: Indicate how data is packed
-		within the slot. For example, 32 slot width in case of
-		sample bit width is 24.
-		0 - MSB
-		1 - LSB
-
-= AFE CLOCKSS
-"clocks" subnode of the AFE node. It represents q6afe clocks
-"clocks" node should have following properties.
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,q6afe-clocks"
-
-- #clock-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 2. Clock Id followed by
-		below valid clock coupling attributes.
-		1 - for no coupled clock
-		2 - for dividend of the coupled clock
-		3 - for divisor of the coupled clock
-		4 - for inverted and no couple clock
-
 = EXAMPLE
 
 apr-service@4 {
 	compatible = "qcom,q6afe";
 	reg = <APR_SVC_AFE>;
-
-	dais {
-		compatible = "qcom,q6afe-dais";
-		#sound-dai-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dai@1 {
-			reg = <HDMI_RX>;
-		};
-
-		dai@24 {
-			reg = <PRIMARY_TDM_RX_0>;
-			qcom,tdm-sync-mode = <1>:
-			qcom,tdm-sync-src = <1>;
-			qcom,tdm-data-out = <0>;
-			qcom,tdm-invert-sync = <1>;
-			qcom,tdm-data-delay = <1>;
-			qcom,tdm-data-align = <0>;
-
-		};
-
-		dai@25 {
-			reg = <PRIMARY_TDM_TX_0>;
-			qcom,tdm-sync-mode = <1>:
-			qcom,tdm-sync-src = <1>;
-			qcom,tdm-data-out = <0>;
-			qcom,tdm-invert-sync = <1>;
-			qcom,tdm-data-delay <1>:
-			qcom,tdm-data-align = <0>;
-		};
-
-		dai@16 {
-			reg = <PRIMARY_MI2S_RX>;
-			qcom,sd-lines = <0 2>;
-		};
-
-		dai@17 {
-			reg = <PRIMARY_MI2S_TX>;
-			qcom,sd-lines = <1>;
-		};
-
-		dai@18 {
-			reg = <SECONDARY_MI2S_RX>;
-			qcom,sd-lines = <0 3>;
-		};
-
-		dai@19 {
-			reg = <SECONDARY_MI2S_TX>;
-			qcom,sd-lines = <1>;
-		};
-
-		dai@20 {
-			reg = <TERTIARY_MI2S_RX>;
-			qcom,sd-lines = <1 3>;
-		};
-
-		dai@21 {
-			reg = <TERTIARY_MI2S_TX>;
-			qcom,sd-lines = <0>;
-		};
-
-		dai@22 {
-			reg = <QUATERNARY_MI2S_RX>;
-			qcom,sd-lines = <0>;
-		};
-
-		dai@23 {
-			reg = <QUATERNARY_MI2S_TX>;
-			qcom,sd-lines = <1>;
-		};
-	};
-
-	clocks {
-		compatible = "qcom,q6afe-clocks";
-		#clock-cells = <2>;
-	};
 };

Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml

@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/qcom,q6apm-dai.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Audio Process Manager Digital Audio Interfaces binding
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Qualcomm APM DAIs in DSP
+
+properties:
+  compatible:
+    const: qcom,q6apm-dais
+
+  reg:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - iommus
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,gpr.h>
+    gpr {
+        compatible = "qcom,gpr";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+        service@1 {
+          compatible = "qcom,q6apm";
+          reg = <1>;
+
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          apm-dai@1 {
+            compatible = "qcom,q6apm-dais";
+            iommus = <&apps_smmu 0x1801 0x0>;
+            reg = <1>;
+          };
+        };
+    };

Documentation/devicetree/bindings/sound/qcom,q6asm.txt

@@ -14,7 +14,7 @@ used by the apr service device.
 		    from DSP.
 		    example "qcom,q6asm-v2.0"
 
-= ASM DAIs (Digial Audio Interface)
+= ASM DAIs (Digital Audio Interface)
 "dais" subnode of the ASM node represents dai specific configuration
 
 - compatible:

Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml

@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-clocks.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm DSP LPASS Clock Controller binding
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Qualcomm DSP Clock Controller
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6afe-clocks
+      - qcom,q6prm-lpass-clocks
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 2
+    description:
+      Clock Id is followed by clock coupling attributes.
+        1 = for no coupled clock
+        2 = for dividend of the coupled clock
+        3 = for divisor of the coupled clock
+        4 = for inverted and no couple clock
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    apr {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        apr-service@4 {
+            reg = <APR_SVC_AFE>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            clock-controller@2 {
+              compatible = "qcom,q6afe-clocks";
+              reg = <2>;
+              #clock-cells = <2>;
+            };
+        };
+      };
+
+  - |
+    #include <dt-bindings/soc/qcom,gpr.h>
+    gpr {
+        compatible = "qcom,gpr";
+        qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        service@2 {
+            reg = <GPR_PRM_MODULE_IID>;
+            compatible = "qcom,q6prm";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            clock-controller@2 {
+              compatible = "qcom,q6prm-lpass-clocks";
+              reg = <2>;
+              #clock-cells = <2>;
+            };
+        };
+      };

Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml

@@ -0,0 +1,205 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-ports.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm DSP LPASS(Low Power Audio SubSystem) Audio Ports binding
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Qualcomm DSP LPASS Audio ports
+
+properties:
+  compatible:
+    enum:
+      - qcom,q6afe-dais
+      - qcom,q6apm-lpass-dais
+
+  reg:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+#Digital Audio Interfaces
+patternProperties:
+  '^dai@[0-9]+$':
+    type: object
+    description:
+      Q6DSP Digital Audio Interfaces.
+
+    properties:
+      reg:
+        description:
+          Digital Audio Interface ID
+
+      qcom,sd-lines:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description:
+          List of serial data lines used by this dai.should be one or more of the 0-3 sd lines.
+        minItems: 1
+        maxItems: 4
+        uniqueItems: true
+        items:
+          minimum: 0
+          maximum: 3
+
+      qcom,tdm-sync-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        description:
+          TDM Synchronization mode
+            0 = Short sync bit mode
+            1 = Long sync mode
+            2 = Short sync slot mode
+
+      qcom,tdm-sync-src:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description:
+          TDM Synchronization source
+            0 = External source
+            1 = Internal source
+
+      qcom,tdm-data-out:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description:
+          TDM Data out signal to drive with other masters
+            0 = Disable
+            1 = Enable
+
+      qcom,tdm-invert-sync:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description:
+          TDM Invert the sync
+            0 = Normal
+            1 = Invert
+
+      qcom,tdm-data-delay:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        description:
+          TDM Number of bit clock to delay data
+            0 = 0 bit clock cycle
+            1 = 1 bit clock cycle
+            2 = 2 bit clock cycle
+
+      qcom,tdm-data-align:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description:
+          Indicate how data is packed within the slot. For example, 32 slot
+          width in case of sample bit width is 24TDM Invert the sync.
+            0 = MSB
+            1 = LSB
+
+    required:
+      - reg
+
+    allOf:
+      - if:
+          properties:
+            reg:
+              contains:
+                # TDM DAI ID range from PRIMARY_TDM_RX_0 - QUINARY_TDM_TX_7
+                items:
+                  minimum: 24
+                  maximum: 103
+        then:
+          required:
+            - qcom,tdm-sync-mode
+            - qcom,tdm-sync-src
+            - qcom,tdm-data-out
+            - qcom,tdm-invert-sync
+            - qcom,tdm-data-delay
+            - qcom,tdm-data-align
+
+      - if:
+          properties:
+            reg:
+              contains:
+                # MI2S DAI ID range PRIMARY_MI2S_RX - QUATERNARY_MI2S_TX and
+                # QUINARY_MI2S_RX - QUINARY_MI2S_TX
+                items:
+                  oneOf:
+                    - minimum: 16
+                      maximum: 23
+                    - minimum: 127
+                      maximum: 128
+        then:
+          required:
+            - qcom,sd-lines
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/qcom,apr.h>
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    apr {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        apr-service@4 {
+            reg = <APR_SVC_AFE>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            q6afedai@1 {
+              compatible = "qcom,q6afe-dais";
+              reg = <1>;
+              #address-cells = <1>;
+              #size-cells = <0>;
+              #sound-dai-cells = <1>;
+
+              dai@22 {
+                reg = <QUATERNARY_MI2S_RX>;
+                qcom,sd-lines = <0 1 2 3>;
+              };
+            };
+        };
+      };
+  - |
+    #include <dt-bindings/soc/qcom,gpr.h>
+    gpr {
+        compatible = "qcom,gpr";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+        service@1 {
+            compatible = "qcom,q6apm";
+            reg = <GPR_APM_MODULE_IID>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            q6apmdai@1 {
+              compatible = "qcom,q6apm-lpass-dais";
+              reg = <1>;
+              #address-cells = <1>;
+              #size-cells = <0>;
+              #sound-dai-cells = <1>;
+
+              dai@22 {
+                reg = <QUATERNARY_MI2S_RX>;
+                qcom,sd-lines = <0 1 2 3>;
+              };
+            };
+        };
+      };

Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml

@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt5682s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek rt5682s codec devicetree bindings
+
+maintainers:
+  - Derek Fang <derek.fang@realtek.com>
+
+description: |
+  Rt5682s(ALC5682I-VS) is a rt5682i variant which supports I2C only.
+
+properties:
+  compatible:
+    const: realtek,rt5682s
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  interrupts:
+    description: The CODEC's interrupt output.
+
+  realtek,dmic1-data-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # dmic1 data is not used
+      - 1 # using GPIO2 pin as dmic1 data pin
+      - 2 # using GPIO5 pin as dmic1 data pin
+    description: |
+      Specify which GPIO pin be used as DMIC1 data pin.
+
+  realtek,dmic1-clk-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # dmic1 clk is not used
+      - 1 # using GPIO1 pin as dmic1 clock pin
+      - 2 # using GPIO3 pin as dmic1 clock pin
+    description: |
+      Specify which GPIO pin be used as DMIC1 clk pin.
+
+  realtek,jd-src:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # No JD is used
+      - 1 # using JD1 as JD source
+    description: |
+      Specify which JD source be used.
+
+  realtek,ldo1-en-gpios:
+    description: |
+      The GPIO that controls the CODEC's LDO1_EN pin.
+
+  realtek,dmic-clk-rate-hz:
+    description: |
+      Set the clock rate (hz) for the requirement of the particular DMIC.
+
+  realtek,dmic-delay-ms:
+    description: |
+      Set the delay time (ms) for the requirement of the particular DMIC.
+
+  realtek,dmic-clk-driving-high:
+    type: boolean
+    description: |
+      Set the high driving of the DMIC clock out.
+
+  clocks:
+    items:
+      - description: phandle and clock specifier for codec MCLK.
+
+  clock-names:
+    items:
+      - const: mclk
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    minItems: 2
+    maxItems: 2
+    description: Name given for DAI word clock and bit clock outputs.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            compatible = "realtek,rt5682s";
+            reg = <0x1a>;
+            interrupt-parent = <&gpio>;
+            interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
+            realtek,ldo1-en-gpios =
+                <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+            realtek,dmic1-data-pin = <1>;
+            realtek,dmic1-clk-pin = <1>;
+            realtek,jd-src = <1>;
+
+            #clock-cells = <1>;
+            clock-output-names = "rt5682-dai-wclk", "rt5682-dai-bclk";
+
+            clocks = <&osc>;
+            clock-names = "mclk";
+        };
+    };

Documentation/devicetree/bindings/sound/richtek,rt9120.yaml

@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/richtek,rt9120.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT9120 Class-D audio amplifier
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT9120 is a high efficiency, I2S-input, stereo audio power amplifier
+  delivering 2*20W into 8 Ohm BTL speaker loads. It supports the wide input
+  voltage  range from 4.5V to 26.4V to meet the need on most common
+  applications like as TV, monitors. home entertainment, electronic music
+  equipment.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt9120
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  pwdnn-gpios:
+    description: GPIO used for power down, low active
+    maxItems: 1
+
+  dvdd-supply:
+    description: |
+      Supply for the default on DVDD power, voltage domain must be 3P3V or 1P8V
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - dvdd-supply
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      rt9120@1a {
+        compatible = "richtek,rt9120";
+        reg = <0x1a>;
+        pwdnn-gpios = <&gpio26 2 0>;
+        dvdd-supply = <&vdd_io_reg>;
+        #sound-dai-cells = <0>;
+      };
+    };

Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml

@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip,i2s-tdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip I2S/TDM Controller
+
+description:
+  The Rockchip I2S/TDM Controller is a Time Division Multiplexed
+  audio interface found in various Rockchip SoCs, allowing up
+  to 8 channels of audio over a serial interface.
+
+maintainers:
+  - Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-i2s-tdm
+      - rockchip,rk1808-i2s-tdm
+      - rockchip,rk3308-i2s-tdm
+      - rockchip,rk3568-i2s-tdm
+      - rockchip,rv1126-i2s-tdm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+
+  dma-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - rx
+        - tx
+
+  clocks:
+    minItems: 3
+    items:
+      - description: clock for TX
+      - description: clock for RX
+      - description: AHB clock driving the interface
+      - description:
+          Parent clock for mclk_tx (only required when using mclk-calibrate)
+      - description:
+          Parent clock for mclk_rx (only required when using mclk-calibrate)
+      - description:
+          Clock for sample rates that are an integer multiple of 8000
+          (only required when using mclk-calibrate)
+      - description:
+          Clock for sample rates that are an integer multiple of 11025
+          (only required when using mclk-calibrate)
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: mclk_tx
+      - const: mclk_rx
+      - const: hclk
+      - const: mclk_tx_src
+      - const: mclk_rx_src
+      - const: mclk_root0
+      - const: mclk_root1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+    description: resets for the tx and rx directions
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - tx-m
+        - rx-m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF register.
+
+  rockchip,trcm-sync-tx-only:
+    type: boolean
+    description: Use TX BCLK/LRCK for both TX and RX.
+
+  rockchip,trcm-sync-rx-only:
+    type: boolean
+    description: Use RX BCLK/LRCK for both TX and RX.
+
+  "#sound-dai-cells":
+    const: 0
+
+  rockchip,i2s-rx-route:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Defines the mapping of I2S RX sdis to I2S data bus lines.
+      By default, they are mapped one-to-one.
+      rockchip,i2s-rx-route = <3> would mean sdi3 is receiving from data0.
+    maxItems: 4
+    items:
+      enum: [0, 1, 2, 3]
+
+  rockchip,i2s-tx-route:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Defines the mapping of I2S TX sdos to I2S data bus lines.
+      By default, they are mapped one-to-one.
+      rockchip,i2s-tx-route = <3> would mean sdo3 is sending to data0.
+    maxItems: 4
+    items:
+      enum: [0, 1, 2, 3]
+
+  rockchip,io-multiplex:
+    description:
+      Specify that the GPIO lines on the I2S bus are multiplexed such that
+      the direction (input/output) needs to be dynamically adjusted.
+    type: boolean
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - rockchip,grf
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        i2s@fe410000 {
+            compatible = "rockchip,rk3568-i2s-tdm";
+            reg = <0x0 0xfe410000 0x0 0x1000>;
+            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>,
+                     <&cru HCLK_I2S1_8CH>;
+            clock-names = "mclk_tx", "mclk_rx", "hclk";
+            dmas = <&dmac1 3>, <&dmac1 2>;
+            dma-names = "rx", "tx";
+            resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>;
+            reset-names = "tx-m", "rx-m";
+            rockchip,trcm-sync-tx-only;
+            rockchip,grf = <&grf>;
+            #sound-dai-cells = <0>;
+            pinctrl-names = "default";
+            pinctrl-0 =
+                <&i2s1m0_sclktx
+                &i2s1m0_sclkrx
+                &i2s1m0_lrcktx
+                &i2s1m0_lrckrx
+                &i2s1m0_sdi0
+                &i2s1m0_sdi1
+                &i2s1m0_sdi2
+                &i2s1m0_sdi3
+                &i2s1m0_sdo0
+                &i2s1m0_sdo1
+                &i2s1m0_sdo2
+                &i2s1m0_sdo3>;
+        };
+    };

Documentation/devicetree/bindings/sound/rockchip,pdm.txt

@@ -1,46 +0,0 @@
-* Rockchip PDM controller
-
-Required properties:
-
-- compatible: "rockchip,pdm"
-  - "rockchip,px30-pdm"
-  - "rockchip,rk1808-pdm"
-  - "rockchip,rk3308-pdm"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- dmas: DMA specifiers for rx dma. See the DMA client binding,
-	Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: should include "rx".
-- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
-- clock-names: should contain following:
-   - "pdm_hclk": clock for PDM BUS
-   - "pdm_clk" : clock for PDM controller
-- resets: a list of phandle + reset-specifer paris, one for each entry in reset-names.
-- reset-names: reset names, should include "pdm-m".
-- pinctrl-names: Must contain a "default" entry.
-- pinctrl-N: One property must exist for each entry in
-	     pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
-	     for details of the property values.
-
-Example for rk3328 PDM controller:
-
-pdm: pdm@ff040000 {
-	compatible = "rockchip,pdm";
-	reg = <0x0 0xff040000 0x0 0x1000>;
-	clocks = <&clk_pdm>, <&clk_gates28 0>;
-	clock-names = "pdm_clk", "pdm_hclk";
-	dmas = <&pdma 16>;
-	#dma-cells = <1>;
-	dma-names = "rx";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&pdmm0_clk
-		     &pdmm0_sdi0
-		     &pdmm0_sdi1
-		     &pdmm0_sdi2
-		     &pdmm0_sdi3>;
-	pinctrl-1 = <&pdmm0_clk_sleep
-		     &pdmm0_sdi0_sleep
-		     &pdmm0_sdi1_sleep
-		     &pdmm0_sdi2_sleep
-		     &pdmm0_sdi3_sleep>;
-};

Documentation/devicetree/bindings/sound/rockchip,pdm.yaml

@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip,pdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PDM controller
+
+description:
+  The Pulse Density Modulation Interface Controller (PDMC) is
+  a PDM interface controller and decoder that support PDM format.
+  It integrates a clock generator driving the PDM microphone
+  and embeds filters which decimate the incoming bit stream to
+  obtain most common audio rates.
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,pdm
+      - rockchip,px30-pdm
+      - rockchip,rk1808-pdm
+      - rockchip,rk3308-pdm
+      - rockchip,rk3568-pdm
+      - rockchip,rv1126-pdm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for PDM controller
+      - description: clock for PDM BUS
+
+  clock-names:
+    items:
+      - const: pdm_clk
+      - const: pdm_hclk
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: rx
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: reset for PDM controller
+
+  reset-names:
+    items:
+      - const: pdm-m
+
+  rockchip,path-map:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Defines the mapping of PDM SDIx to PDM PATHx.
+      By default, they are mapped one-to-one.
+    maxItems: 4
+    uniqueItems: true
+    items:
+      enum: [ 0, 1, 2, 3 ]
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3328-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pdm@ff040000 {
+            compatible = "rockchip,pdm";
+            reg = <0x0 0xff040000 0x0 0x1000>;
+            interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cru SCLK_PDM>, <&cru HCLK_PDM>;
+            clock-names = "pdm_clk", "pdm_hclk";
+            dmas = <&dmac 16>;
+            dma-names = "rx";
+            #sound-dai-cells = <0>;
+            pinctrl-names = "default", "sleep";
+            pinctrl-0 = <&pdmm0_clk
+                         &pdmm0_sdi0
+                         &pdmm0_sdi1
+                         &pdmm0_sdi2
+                         &pdmm0_sdi3>;
+            pinctrl-1 = <&pdmm0_clk_sleep
+                         &pdmm0_sdi0_sleep
+                         &pdmm0_sdi1_sleep
+                         &pdmm0_sdi2_sleep
+                         &pdmm0_sdi3_sleep>;
+        };
+    };

Documentation/devicetree/bindings/sound/rt5659.txt

@@ -42,7 +42,7 @@ Optional properties:
 - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
 - realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin.
 
-- sound-name-prefix: Please refer to name-prefix.txt
+- sound-name-prefix: Please refer to name-prefix.yaml
 
 - ports: A Codec may have a single or multiple I2S interfaces. These
   interfaces on Codec side can be described under 'ports' or 'port'.

Documentation/devicetree/bindings/sound/simple-amplifier.txt

@@ -1,17 +0,0 @@
-Simple Amplifier Audio Driver
-
-Required properties:
-- compatible : "dioo,dio2125" or "simple-audio-amplifier"
-
-Optional properties:
-- enable-gpios : the gpio connected to the enable pin of the simple amplifier
-- VCC-supply   : power supply for the device, as covered
-                 in Documentation/devicetree/bindings/regulator/regulator.txt
-
-Example:
-
-amp: analog-amplifier {
-	compatible = "simple-audio-amplifier";
-	VCC-supply = <&regulator>;
-	enable-gpios = <&gpio GPIOH_3 0>;
-};

Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml

@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/simple-audio-amplifier.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple Audio Amplifier Device Tree Bindings
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+properties:
+  compatible:
+    enum:
+      - dioo,dio2125
+      - simple-audio-amplifier
+
+  enable-gpios:
+    maxItems: 1
+
+  VCC-supply:
+    description: >
+      power supply for the device
+
+  sound-name-prefix:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: >
+      See ./name-prefix.txt
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/meson8-gpio.h>
+
+    analog-amplifier {
+        compatible = "simple-audio-amplifier";
+        VCC-supply = <&regulator>;
+        enable-gpios = <&gpio GPIOH_3 0>;
+    };
+
+...

Documentation/devicetree/bindings/sound/simple-audio-mux.yaml

@@ -13,6 +13,9 @@ description: |
   Simple audio multiplexers are driven using gpios, allowing to select which of
   their input line is connected to the output line.
 
+allOf:
+  - $ref: name-prefix.yaml#
+
 properties:
   compatible:
     const: simple-audio-mux
@@ -21,11 +24,7 @@ properties:
     description: |
       GPIOs used to select the input line.
 
-  sound-name-prefix:
+  sound-name-prefix: true
-    $ref: /schemas/types.yaml#/definitions/string
-    description:
-      Used as prefix for sink/source names of the component. Must be a
-      unique string among multiple instances of the same component.
 
 required:
   - compatible

Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml

@@ -46,7 +46,27 @@ properties:
 
 patternProperties:
   "^port@[0-9]$":
-    description: FIXME, Need to define what each port is.
+    description: |
+      Port number of DT node is specified by the following DAI channels that
+      depends on SoC.
+      ld11-aio,ld20-aio:
+        0: hdmi
+        1: pcmin2
+        2: line
+        3: hpcmout1
+        4: pcmout3
+        5: hiecout1
+        6: epcmout2
+        7: epcmout3
+        8: hieccompout1
+      pxs2-aio:
+        0: hdmi
+        1: line
+        2: aux
+        3: hiecout1
+        4: iecout1
+        5: hieccompout1
+        6: ieccompout1
     $ref: audio-graph-port.yaml#
     unevaluatedProperties: false
 

Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml

@@ -40,7 +40,11 @@ properties:
 
 patternProperties:
   "^port@[0-9]$":
-    description: FIXME, Need to define what each port is.
+    description: |
+      Port number of DT node is specified by the following DAI channels.
+        0: line1
+        1: hp
+        2: line2
     $ref: audio-graph-port.yaml#
     unevaluatedProperties: false
 

Documentation/devicetree/bindings/sound/spdif-transmitter.txt

@@ -1,10 +0,0 @@
-Device-Tree bindings for dummy spdif transmitter
-
-Required properties:
-	- compatible: should be "linux,spdif-dit".
-
-Example node:
-
-	codec: spdif-transmitter {
-		compatible = "linux,spdif-dit";
-	};

Documentation/devicetree/bindings/sound/test-component.yaml

@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/test-component.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Test Component Device Tree Bindings
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+  compatible:
+    enum:
+      - test-cpu
+      - test-cpu-verbose
+      - test-cpu-verbose-dai
+      - test-cpu-verbose-component
+      - test-codec
+      - test-codec-verbose
+      - test-codec-verbose-dai
+      - test-codec-verbose-component
+
+required:
+  - compatible
+
+additionalProperties: true
+
+examples:
+  - |
+    test_cpu {
+        compatible = "test-cpu";
+    };

Documentation/devicetree/bindings/sound/wlf,wm8962.yaml

@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8962.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM8962 Ultra-Low Power Stereo CODEC
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+properties:
+  compatible:
+    const: wlf,wm8962
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  AVDD-supply:
+    description: Analogue supply.
+
+  CPVDD-supply:
+    description: Charge pump power supply.
+
+  DBVDD-supply:
+    description: Digital Buffer Supply.
+
+  DCVDD-supply:
+    description: Digital Core Supply.
+
+  MICVDD-supply:
+    description: Microphone bias amp supply.
+
+  PLLVDD-supply:
+    description: PLL Supply
+
+  SPKVDD1-supply:
+    description: Supply for left speaker drivers.
+
+  SPKVDD2-supply:
+    description: Supply for right speaker drivers.
+
+  spk-mono:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If present, the SPK_MONO bit of R51 (Class D Control 2) gets set,
+      indicating that the speaker is in mono mode.
+
+  mic-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Default register value for R48 (Additional Control 4).
+      If absent, the default should be the register default.
+
+  gpio-cfg:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 6
+    maxItems: 6
+    description:
+      A list of GPIO configuration register values.  If absent, no
+      configuration of these registers is performed.  Note that only values
+      within [0x0, 0xffff] are valid.  Any other value is regarded as setting
+      the GPIO register to its reset value 0x0.
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - AVDD-supply
+  - CPVDD-supply
+  - DBVDD-supply
+  - DCVDD-supply
+  - MICVDD-supply
+  - PLLVDD-supply
+  - SPKVDD1-supply
+  - SPKVDD2-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          wm8962: codec@1a {
+                  compatible = "wlf,wm8962";
+                  reg = <0x1a>;
+                  clocks = <&clks IMX6QDL_CLK_CKO>;
+                  DCVDD-supply = <&reg_audio>;
+                  DBVDD-supply = <&reg_audio>;
+                  AVDD-supply = <&reg_audio>;
+                  CPVDD-supply = <&reg_audio>;
+                  MICVDD-supply = <&reg_audio>;
+                  PLLVDD-supply = <&reg_audio>;
+                  SPKVDD1-supply = <&reg_audio>;
+                  SPKVDD2-supply = <&reg_audio>;
+                  gpio-cfg = <
+                          0x0000 /* 0:Default */
+                          0x0000 /* 1:Default */
+                          0x0013 /* 2:FN_DMICCLK */
+                          0x0000 /* 3:Default */
+                          0x8014 /* 4:FN_DMICCDAT */
+                          0x0000 /* 5:Default */
+                  >;
+          };
+    };

Documentation/devicetree/bindings/sound/wlf,wm8978.yaml

@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/wlf,wm8978.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wolfson WM8978 Codec Device Tree Bindings
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+properties:
+  '#sound-dai-cells':
+    const: 0
+
+  compatible:
+    const: wlf,wm8978
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 526000
+
+required:
+  - '#sound-dai-cells'
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@0 {
+            #sound-dai-cells = <0>;
+            compatible = "wlf,wm8978";
+            reg = <0>;
+            spi-max-frequency = <500000>;
+        };
+    };
+
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            #sound-dai-cells = <0>;
+            compatible = "wlf,wm8978";
+            reg = <0x1a>;
+        };
+    };
+
+...

Documentation/devicetree/bindings/sound/wm8962.txt

@@ -1,43 +0,0 @@
-WM8962 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
-  - compatible : "wlf,wm8962"
-
-  - reg : the I2C address of the device.
-
-Optional properties:
-
-  - clocks : The clock source of the mclk
-
-  - spk-mono: This is a boolean property. If present, the SPK_MONO bit
-    of R51 (Class D Control 2) gets set, indicating that the speaker is
-    in mono mode.
-
-  - mic-cfg : Default register value for R48 (Additional Control 4).
-    If absent, the default should be the register default.
-
-  - gpio-cfg : A list of GPIO configuration register values. The list must
-    be 6 entries long. If absent, no configuration of these registers is
-    performed. And note that only the value within [0x0, 0xffff] is valid.
-    Any other value is regarded as setting the GPIO register by its reset
-    value 0x0.
-
-Example:
-
-wm8962: codec@1a {
-	compatible = "wlf,wm8962";
-	reg = <0x1a>;
-	clocks = <&clks IMX6QDL_CLK_CKO>;
-
-	gpio-cfg = <
-		0x0000 /* 0:Default */
-		0x0000 /* 1:Default */
-		0x0013 /* 2:FN_DMICCLK */
-		0x0000 /* 3:Default */
-		0x8014 /* 4:FN_DMICCDAT */
-		0x0000 /* 5:Default */
-	>;
-};

Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml

@@ -171,7 +171,7 @@ examples:
       cs-gpios = <&gpio0 13 0>,
                  <&gpio0 14 0>;
       rx-sample-delay-ns = <3>;
-      spi-flash@1 {
+      flash@1 {
         compatible = "spi-nand";
         reg = <1>;
         rx-sample-delay-ns = <7>;

Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml

@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/samsung,exynos-ufs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series UFS host controller Device Tree Bindings
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+
+description: |
+  Each Samsung UFS host controller instance should have its own node.
+  This binding define Samsung specific binding other then what is used
+  in the common ufshcd bindings
+  [1] Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+
+properties:
+
+  compatible:
+    enum:
+      - samsung,exynos7-ufs
+
+  reg:
+    items:
+      - description: HCI register
+      - description: vendor specific register
+      - description: unipro register
+      - description: UFS protector register
+
+  reg-names:
+    items:
+      - const: hci
+      - const: vs_hci
+      - const: unipro
+      - const: ufsp
+
+  clocks:
+    items:
+      - description: ufs link core clock
+      - description: unipro main clock
+
+  clock-names:
+    items:
+      - const: core_clk
+      - const: sclk_unipro_main
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: ufs-phy
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phys
+  - phy-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/exynos7-clk.h>
+
+    ufs: ufs@15570000 {
+       compatible = "samsung,exynos7-ufs";
+       reg = <0x15570000 0x100>,
+             <0x15570100 0x100>,
+             <0x15571000 0x200>,
+             <0x15572000 0x300>;
+       reg-names = "hci", "vs_hci", "unipro", "ufsp";
+       interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+       clocks = <&clock_fsys1 ACLK_UFS20_LINK>,
+                <&clock_fsys1 SCLK_UFSUNIPRO20_USER>;
+       clock-names = "core_clk", "sclk_unipro_main";
+       pinctrl-names = "default";
+       pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+       phys = <&ufs_phy>;
+       phy-names = "ufs-phy";
+    };
+...

Documentation/filesystems/ntfs3.rst

@@ -4,103 +4,112 @@
 NTFS3
 =====
 
-
 Summary and Features
 ====================
 
-NTFS3 is fully functional NTFS Read-Write driver. The driver works with
+NTFS3 is fully functional NTFS Read-Write driver. The driver works with NTFS
-NTFS versions up to 3.1, normal/compressed/sparse files
+versions up to 3.1. File system type to use on mount is *ntfs3*.
-and journal replaying. File system type to use on mount is 'ntfs3'.
 
 - This driver implements NTFS read/write support for normal, sparse and
   compressed files.
-- Supports native journal replaying;
+- Supports native journal replaying.
-- Supports extended attributes
-	Predefined extended attributes:
-	- 'system.ntfs_security' gets/sets security
-			descriptor (SECURITY_DESCRIPTOR_RELATIVE)
-	- 'system.ntfs_attrib' gets/sets ntfs file/dir attributes.
-		Note: applied to empty files, this allows to switch type between
-		sparse(0x200), compressed(0x800) and normal;
 - Supports NFS export of mounted NTFS volumes.
+- Supports extended attributes. Predefined extended attributes:
+
+	- *system.ntfs_security* gets/sets security
+
+		Descriptor: SECURITY_DESCRIPTOR_RELATIVE
+
+	- *system.ntfs_attrib* gets/sets ntfs file/dir attributes.
+
+	  Note: Applied to empty files, this allows to switch type between
+	  sparse(0x200), compressed(0x800) and normal.
 
 Mount Options
 =============
 
 The list below describes mount options supported by NTFS3 driver in addition to
-generic ones.
+generic ones. You can use every mount option with **no** option. If it is in
+this table marked with no it means default is without **no**.
 
-===============================================================================
+.. flat-table::
+   :widths: 1 5
+   :fill-cells:
 
-nls=name		This option informs the driver how to interpret path
+   * - iocharset=name
-			strings and translate them to Unicode and back. If
+     - This option informs the driver how to interpret path strings and
-			this option is not set, the default codepage will be
+       translate them to Unicode and back. If this option is not set, the
-			used (CONFIG_NLS_DEFAULT).
+       default codepage will be used (CONFIG_NLS_DEFAULT).
-			Examples:
-				'nls=utf8'
 
-uid=
+       Example: iocharset=utf8
-gid=
-umask=			Controls the default permissions for files/directories created
-			after the NTFS volume is mounted.
 
-fmask=
+   * - uid=
-dmask=			Instead of specifying umask which applies both to
+     - :rspan:`1`
-			files and directories, fmask applies only to files and
+   * - gid=
-			dmask only to directories.
 
-nohidden		Files with the Windows-specific HIDDEN (FILE_ATTRIBUTE_HIDDEN)
+   * - umask=
-			attribute will not be shown under Linux.
+     - Controls the default permissions for files/directories created after
+       the NTFS volume is mounted.
 
-sys_immutable		Files with the Windows-specific SYSTEM
+   * - dmask=
-			(FILE_ATTRIBUTE_SYSTEM) attribute will be marked as system
+     - :rspan:`1` Instead of specifying umask which applies both to files and
-			immutable files.
+       directories, fmask applies only to files and dmask only to directories.
+   * - fmask=
 
-discard			Enable support of the TRIM command for improved performance
+   * - noacsrules
-			on delete operations, which is recommended for use with the
+     - "No access rules" mount option sets access rights for files/folders to
-			solid-state drives (SSD).
+       777 and owner/group to root. This mount option absorbs all other
+       permissions.
 
-force			Forces the driver to mount partitions even if 'dirty' flag
+       - Permissions change for files/folders will be reported as successful,
-			(volume dirty) is set. Not recommended for use.
+	 but they will remain 777.
 
-sparse			Create new files as "sparse".
+       - Owner/group change will be reported as successful, butthey will stay
+	 as root.
 
-showmeta		Use this parameter to show all meta-files (System Files) on
+   * - nohidden
-			a mounted NTFS partition.
+     - Files with the Windows-specific HIDDEN (FILE_ATTRIBUTE_HIDDEN) attribute
-			By default, all meta-files are hidden.
+       will not be shown under Linux.
 
-prealloc		Preallocate space for files excessively when file size is
+   * - sys_immutable
-			increasing on writes. Decreases fragmentation in case of
+     - Files with the Windows-specific SYSTEM (FILE_ATTRIBUTE_SYSTEM) attribute
-			parallel write operations to different files.
+       will be marked as system immutable files.
 
-no_acs_rules		"No access rules" mount option sets access rights for
+   * - discard
-			files/folders to 777 and owner/group to root. This mount
+     - Enable support of the TRIM command for improved performance on delete
-			option absorbs all other permissions:
+       operations, which is recommended for use with the solid-state drives
-			- permissions change for files/folders will be reported
+       (SSD).
-				as successful, but they will remain 777;
-			- owner/group change will be reported as successful, but
-				they will stay as root
 
-acl			Support POSIX ACLs (Access Control Lists). Effective if
+   * - force
-			supported by Kernel. Not to be confused with NTFS ACLs.
+     - Forces the driver to mount partitions even if volume is marked dirty.
-			The option specified as acl enables support for POSIX ACLs.
+       Not recommended for use.
 
-noatime			All files and directories will not update their last access
+   * - sparse
-			time attribute if a partition is mounted with this parameter.
+     - Create new files as sparse.
-			This option can speed up file system operation.
 
-===============================================================================
+   * - showmeta
+     - Use this parameter to show all meta-files (System Files) on a mounted
+       NTFS partition. By default, all meta-files are hidden.
 
-ToDo list
+   * - prealloc
+     - Preallocate space for files excessively when file size is increasing on
+       writes. Decreases fragmentation in case of parallel write operations to
+       different files.
+
+   * - acl
+     - Support POSIX ACLs (Access Control Lists). Effective if supported by
+       Kernel. Not to be confused with NTFS ACLs. The option specified as acl
+       enables support for POSIX ACLs.
+
+Todo list
 =========
-
+- Full journaling support over JBD. Currently journal replaying is supported
-- Full journaling support (currently journal replaying is supported) over JBD.
+  which is not necessarily as effectice as JBD would be.
-
 
 References
 ==========
-https://www.paragon-software.com/home/ntfs-linux-professional/
+- Commercial version of the NTFS driver for Linux.
-	- Commercial version of the NTFS driver for Linux.
+	https://www.paragon-software.com/home/ntfs-linux-professional/
 
-almaz.alexandrovich@paragon-software.com
+- Direct e-mail address for feedback and requests on the NTFS3 implementation.
-	- Direct e-mail address for feedback and requests on the NTFS3 implementation.
+	almaz.alexandrovich@paragon-software.com

Documentation/gpu/amdgpu.rst

@@ -300,8 +300,8 @@ pcie_replay_count
 .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
    :doc: pcie_replay_count
 
-+GPU SmartShift Information
+GPU SmartShift Information
-============================
+==========================
 
 GPU SmartShift information via sysfs
 

Documentation/gpu/drm-internals.rst

@@ -111,15 +111,6 @@ Component Helper Usage
 .. kernel-doc:: drivers/gpu/drm/drm_drv.c
    :doc: component helper usage recommendations
 
-IRQ Helper Library
-~~~~~~~~~~~~~~~~~~
-
-.. kernel-doc:: drivers/gpu/drm/drm_irq.c
-   :doc: irq helpers
-
-.. kernel-doc:: drivers/gpu/drm/drm_irq.c
-   :export:
-
 Memory Manager Initialization
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 

Documentation/hwmon/k10temp.rst

@@ -132,20 +132,3 @@ On Family 17h and Family 18h CPUs, additional temperature sensors may report
 Core Complex Die (CCD) temperatures. Up to 8 such temperatures are reported
 as temp{3..10}_input, labeled Tccd{1..8}. Actual support depends on the CPU
 variant.
-
-Various Family 17h and 18h CPUs report voltage and current telemetry
-information. The following attributes may be reported.
-
-Attribute	Label	Description
-===============	=======	================
-in0_input	Vcore	Core voltage
-in1_input	Vsoc	SoC voltage
-curr1_input	Icore	Core current
-curr2_input	Isoc	SoC current
-===============	=======	================
-
-Current values are raw (unscaled) as reported by the CPU. Core current is
-reported as multiples of 1A / LSB. SoC is reported as multiples of 0.25A
-/ LSB. The real current is board specific. Reported currents should be seen
-as rough guidance, and should be scaled using sensors3.conf as appropriate
-for a given board.

Documentation/networking/device_drivers/ethernet/intel/ice.rst

@@ -851,7 +851,7 @@ NOTES:
 - 0x88A8 traffic will not be received unless VLAN stripping is disabled with
   the following command::
 
-    # ethool -K <ethX> rxvlan off
+    # ethtool -K <ethX> rxvlan off
 
 - 0x88A8/0x8100 double VLANs cannot be used with 0x8100 or 0x8100/0x8100 VLANS
   configured on the same port. 0x88a8/0x8100 traffic will not be received if

Documentation/networking/dsa/sja1105.rst

@@ -296,7 +296,7 @@ not available.
 Device Tree bindings and board design
 =====================================
 
-This section references ``Documentation/devicetree/bindings/net/dsa/sja1105.txt``
+This section references ``Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml``
 and aims to showcase some potential switch caveats.
 
 RMII PHY role and out-of-band signaling

Documentation/process/changes.rst

@@ -29,7 +29,7 @@ you probably needn't concern yourself with pcmciautils.
 ====================== ===============  ========================================
         Program        Minimal version       Command to check the version
 ====================== ===============  ========================================
-GNU C                  4.9              gcc --version
+GNU C                  5.1              gcc --version
 Clang/LLVM (optional)  10.0.1           clang --version
 GNU make               3.81             make --version
 binutils               2.23             ld -v

Documentation/sound/alsa-configuration.rst

@@ -100,6 +100,15 @@ amidi_map
     MIDI device number maps assigned to the 2st OSS device;
     Default: 1
 
+Module snd-soc-core
+-------------------
+
+The soc core module. It is used by all ALSA card drivers.
+It takes the following options which have global effects.
+
+prealloc_buffer_size_kbytes
+    Specify prealloc buffer size in kbytes (default: 512).
+
 Common parameters for top sound card modules
 --------------------------------------------
 

Documentation/sound/soc/codec.rst

@@ -40,7 +40,7 @@ e.g.
 	.prepare	= wm8731_pcm_prepare,
 	.hw_params	= wm8731_hw_params,
 	.shutdown	= wm8731_shutdown,
-	.digital_mute	= wm8731_mute,
+	.mute_stream	= wm8731_mute,
 	.set_sysclk	= wm8731_set_dai_sysclk,
 	.set_fmt	= wm8731_set_dai_fmt,
   };
@@ -60,7 +60,7 @@ e.g.
 		.rates = WM8731_RATES,
 		.formats = WM8731_FORMATS,},
 	.ops = &wm8731_dai_ops,
-	.symmetric_rates = 1,
+	.symmetric_rate = 1,
   };
 
 
@@ -177,10 +177,10 @@ when the mute is applied or freed.
 i.e.
 ::
 
-  static int wm8974_mute(struct snd_soc_dai *dai, int mute)
+  static int wm8974_mute(struct snd_soc_dai *dai, int mute, int direction)
   {
 	struct snd_soc_component *component = dai->component;
-	u16 mute_reg = snd_soc_component_read32(component, WM8974_DAC) & 0xffbf;
+	u16 mute_reg = snd_soc_component_read(component, WM8974_DAC) & 0xffbf;
 
 	if (mute)
 		snd_soc_component_write(component, WM8974_DAC, mute_reg | 0x40);

Documentation/translations/zh_CN/admin-guide/README.rst

@@ -223,7 +223,7 @@ Linux内核5.x版本 <http://kernel.org/>
 编译内核
 ---------
 
- - 确保您至少有gcc 4.9可用。
+ - 确保您至少有gcc 5.1可用。
    有关更多信息，请参阅 :ref:`Documentation/process/changes.rst <changes>` 。
 
    请注意，您仍然可以使用此内核运行a.out用户程序。

Documentation/translations/zh_TW/admin-guide/README.rst

@@ -226,7 +226,7 @@ Linux內核5.x版本 <http://kernel.org/>
 編譯內核
 ---------
 
- - 確保您至少有gcc 4.9可用。
+ - 確保您至少有gcc 5.1可用。
    有關更多信息，請參閱 :ref:`Documentation/process/changes.rst <changes>` 。
 
    請注意，您仍然可以使用此內核運行a.out用戶程序。

Documentation/userspace-api/vduse.rst

@@ -18,7 +18,7 @@ types can be added after the security issue of corresponding device driver
 is clarified or fixed in the future.
 
 Create/Destroy VDUSE devices
-------------------------
+----------------------------
 
 VDUSE devices are created as follows:
 

MAINTAINERS

@@ -414,7 +414,8 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
 F:	drivers/acpi/pmic/
 
 ACPI THERMAL DRIVER
-M:	Zhang Rui <rui.zhang@intel.com>
+M:	Rafael J. Wysocki <rafael@kernel.org>
+R:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 S:	Supported
 W:	https://01.org/linux-acpi
@@ -810,7 +811,7 @@ F:	Documentation/devicetree/bindings/dma/altr,msgdma.yaml
 F:	drivers/dma/altera-msgdma.c
 
 ALTERA PIO DRIVER
-M:	Joyce Ooi <joyce.ooi@intel.com>
+M:	Mun Yew Tham <mun.yew.tham@intel.com>
 L:	linux-gpio@vger.kernel.org
 S:	Maintained
 F:	drivers/gpio/gpio-altera.c
@@ -977,12 +978,12 @@ L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/amd-pmc.*
 
-AMD POWERPLAY
+AMD POWERPLAY AND SWSMU
 M:	Evan Quan <evan.quan@amd.com>
 L:	amd-gfx@lists.freedesktop.org
 S:	Supported
 T:	git https://gitlab.freedesktop.org/agd5f/linux.git
-F:	drivers/gpu/drm/amd/pm/powerplay/
+F:	drivers/gpu/drm/amd/pm/
 
 AMD PTDMA DRIVER
 M:	Sanjay R Mehta <sanju.mehta@amd.com>
@@ -1275,6 +1276,7 @@ F:	drivers/input/mouse/bcm5974.c
 
 APPLE DART IOMMU DRIVER
 M:	Sven Peter <sven@svenpeter.dev>
+R:	Alyssa Rosenzweig <alyssa@rosenzweig.io>
 L:	iommu@lists.linux-foundation.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/iommu/apple,dart.yaml
@@ -1711,6 +1713,8 @@ F:	drivers/*/*alpine*
 
 ARM/APPLE MACHINE SUPPORT
 M:	Hector Martin <marcan@marcan.st>
+M:	Sven Peter <sven@svenpeter.dev>
+R:	Alyssa Rosenzweig <alyssa@rosenzweig.io>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 W:	https://asahilinux.org
@@ -2236,6 +2240,7 @@ F:	arch/arm/mach-pxa/mioa701.c
 
 ARM/MStar/Sigmastar Armv7 SoC support
 M:	Daniel Palmer <daniel@thingy.jp>
+M:	Romain Perier <romain.perier@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 W:	http://linux-chenxing.org/
@@ -2712,6 +2717,7 @@ F:	drivers/power/reset/keystone-reset.c
 
 ARM/TEXAS INSTRUMENTS K3 ARCHITECTURE
 M:	Nishanth Menon <nm@ti.com>
+M:	Vignesh Raghavendra <vigneshr@ti.com>
 M:	Tero Kristo <kristo@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
@@ -2804,9 +2810,8 @@ F:	arch/arm/mach-pxa/include/mach/vpac270.h
 F:	arch/arm/mach-pxa/vpac270.c
 
 ARM/VT8500 ARM ARCHITECTURE
-M:	Tony Prisk <linux@prisktech.co.nz>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
+S:	Orphan
 F:	Documentation/devicetree/bindings/i2c/i2c-wmt.txt
 F:	arch/arm/mach-vt8500/
 F:	drivers/clocksource/timer-vt8500.c
@@ -2962,7 +2967,7 @@ F:	crypto/async_tx/
 F:	include/linux/async_tx.h
 
 AT24 EEPROM DRIVER
-M:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
+M:	Bartosz Golaszewski <brgl@bgdev.pl>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git
@@ -3385,9 +3390,11 @@ F:	Documentation/networking/filter.rst
 F:	Documentation/userspace-api/ebpf/
 F:	arch/*/net/*
 F:	include/linux/bpf*
+F:	include/linux/btf*
 F:	include/linux/filter.h
 F:	include/trace/events/xdp.h
 F:	include/uapi/linux/bpf*
+F:	include/uapi/linux/btf*
 F:	include/uapi/linux/filter.h
 F:	kernel/bpf/
 F:	kernel/trace/bpf_trace.c
@@ -3821,7 +3828,6 @@ F:	drivers/scsi/mpi3mr/
 
 BROADCOM NETXTREME-E ROCE DRIVER
 M:	Selvin Xavier <selvin.xavier@broadcom.com>
-M:	Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
 L:	linux-rdma@vger.kernel.org
 S:	Supported
 W:	http://www.broadcom.com
@@ -4445,6 +4451,17 @@ L:	patches@opensource.cirrus.com
 S:	Maintained
 F:	sound/soc/codecs/cs*
 
+CIRRUS LOGIC DSP FIRMWARE DRIVER
+M:	Simon Trimmer <simont@opensource.cirrus.com>
+M:	Charles Keepax <ckeepax@opensource.cirrus.com>
+M:	Richard Fitzgerald <rf@opensource.cirrus.com>
+L:	patches@opensource.cirrus.com
+S:	Supported
+W:	https://github.com/CirrusLogic/linux-drivers/wiki
+T:	git https://github.com/CirrusLogic/linux-drivers.git
+F:	drivers/firmware/cirrus/*
+F:	include/linux/firmware/cirrus/*
+
 CIRRUS LOGIC EP93XX ETHERNET DRIVER
 M:	Hartley Sweeten <hsweeten@visionengravers.com>
 L:	netdev@vger.kernel.org
@@ -4656,7 +4673,7 @@ W:	http://linux-cifs.samba.org/
 T:	git git://git.samba.org/sfrench/cifs-2.6.git
 F:	Documentation/admin-guide/cifs/
 F:	fs/cifs/
-F:	fs/cifs_common/
+F:	fs/smbfs_common/
 
 COMPACTPCI HOTPLUG CORE
 M:	Scott Murray <scott@spiteful.org>
@@ -7337,10 +7354,11 @@ F:	include/uapi/linux/fpga-dfl.h
 
 FPGA MANAGER FRAMEWORK
 M:	Moritz Fischer <mdf@kernel.org>
+M:	Wu Hao <hao.wu@intel.com>
+M:	Xu Yilun <yilun.xu@intel.com>
 R:	Tom Rix <trix@redhat.com>
 L:	linux-fpga@vger.kernel.org
 S:	Maintained
-W:	http://www.rocketboards.org
 Q:	http://patchwork.kernel.org/project/linux-fpga/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga.git
 F:	Documentation/devicetree/bindings/fpga/
@@ -7434,7 +7452,7 @@ FREESCALE IMX / MXC FEC DRIVER
 M:	Joakim Zhang <qiangqing.zhang@nxp.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/net/fsl-fec.txt
+F:	Documentation/devicetree/bindings/net/fsl,fec.yaml
 F:	drivers/net/ethernet/freescale/fec.h
 F:	drivers/net/ethernet/freescale/fec_main.c
 F:	drivers/net/ethernet/freescale/fec_ptp.c
@@ -7986,7 +8004,7 @@ F:	include/linux/gpio/regmap.h
 
 GPIO SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
-M:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
+M:	Bartosz Golaszewski <brgl@bgdev.pl>
 L:	linux-gpio@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
@@ -8608,9 +8626,8 @@ F:	Documentation/devicetree/bindings/iio/humidity/st,hts221.yaml
 F:	drivers/iio/humidity/hts221*
 
 HUAWEI ETHERNET DRIVER
-M:	Bin Luo <luobin9@huawei.com>
 L:	netdev@vger.kernel.org
-S:	Supported
+S:	Orphan
 F:	Documentation/networking/device_drivers/ethernet/huawei/hinic.rst
 F:	drivers/net/ethernet/huawei/hinic/
 
@@ -9302,7 +9319,7 @@ S:	Maintained
 F:	drivers/platform/x86/intel/atomisp2/led.c
 
 INTEL BIOS SAR INT1092 DRIVER
-M:	Shravan S <s.shravan@intel.com>
+M:	Shravan Sudhakar <s.shravan@intel.com>
 M:	Intel Corporation <linuxwwan@intel.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
@@ -9624,7 +9641,7 @@ F:	include/uapi/linux/isst_if.h
 F:	tools/power/x86/intel-speed-select/
 
 INTEL STRATIX10 FIRMWARE DRIVERS
-M:	Richard Gong <richard.gong@linux.intel.com>
+M:	Dinh Nguyen <dinguyen@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
@@ -10194,8 +10211,8 @@ M:	Hyunchul Lee <hyc.lee@gmail.com>
 L:	linux-cifs@vger.kernel.org
 S:	Maintained
 T:	git git://git.samba.org/ksmbd.git
-F:	fs/cifs_common/
 F:	fs/ksmbd/
+F:	fs/smbfs_common/
 
 KERNEL UNIT TESTING FRAMEWORK (KUnit)
 M:	Brendan Higgins <brendanhiggins@google.com>
@@ -10274,7 +10291,6 @@ KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
 M:	Christian Borntraeger <borntraeger@de.ibm.com>
 M:	Janosch Frank <frankja@linux.ibm.com>
 R:	David Hildenbrand <david@redhat.com>
-R:	Cornelia Huck <cohuck@redhat.com>
 R:	Claudio Imbrenda <imbrenda@linux.ibm.com>
 L:	kvm@vger.kernel.org
 S:	Supported
@@ -11148,6 +11164,7 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/net/dsa/marvell.txt
 F:	Documentation/networking/devlink/mv88e6xxx.rst
 F:	drivers/net/dsa/mv88e6xxx/
+F:	include/linux/dsa/mv88e6xxx.h
 F:	include/linux/platform_data/mv88e6xxx.h
 
 MARVELL ARMADA 3700 PHY DRIVERS
@@ -11367,7 +11384,7 @@ F:	Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml
 F:	drivers/iio/proximity/mb1232.c
 
 MAXIM MAX77650 PMIC MFD DRIVER
-M:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
+M:	Bartosz Golaszewski <brgl@bgdev.pl>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/*/*max77650.yaml
@@ -13255,9 +13272,9 @@ F:	Documentation/scsi/NinjaSCSI.rst
 F:	drivers/scsi/nsp32*
 
 NIOS2 ARCHITECTURE
-M:	Ley Foon Tan <ley.foon.tan@intel.com>
+M:	Dinh Nguyen <dinguyen@kernel.org>
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
 F:	arch/nios2/
 
 NITRO ENCLAVES (NE)
@@ -14342,7 +14359,8 @@ F:	Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
 F:	drivers/pci/controller/pci-ixp4xx.c
 
 PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD)
-M:	Jonathan Derrick <jonathan.derrick@intel.com>
+M:	Nirmal Patel <nirmal.patel@linux.intel.com>
+R:	Jonathan Derrick <jonathan.derrick@linux.dev>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	drivers/pci/controller/vmd.c
@@ -16097,6 +16115,13 @@ F:	Documentation/ABI/*/sysfs-driver-hid-roccat*
 F:	drivers/hid/hid-roccat*
 F:	include/linux/hid-roccat*
 
+ROCKCHIP I2S TDM DRIVER
+M:	Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
+L:	linux-rockchip@lists.infradead.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml
+F:	sound/soc/rockchip/rockchip_i2s_tdm.*
+
 ROCKCHIP ISP V1 DRIVER
 M:	Helen Koike <helen.koike@collabora.com>
 M:	Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
@@ -16295,6 +16320,7 @@ S390
 M:	Heiko Carstens <hca@linux.ibm.com>
 M:	Vasily Gorbik <gor@linux.ibm.com>
 M:	Christian Borntraeger <borntraeger@de.ibm.com>
+R:	Alexander Gordeev <agordeev@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -16373,7 +16399,6 @@ F:	drivers/s390/crypto/vfio_ap_ops.c
 F:	drivers/s390/crypto/vfio_ap_private.h
 
 S390 VFIO-CCW DRIVER
-M:	Cornelia Huck <cohuck@redhat.com>
 M:	Eric Farman <farman@linux.ibm.com>
 M:	Matthew Rosato <mjrosato@linux.ibm.com>
 R:	Halil Pasic <pasic@linux.ibm.com>
@@ -16650,13 +16675,6 @@ M:	Lubomir Rintel <lkundrak@v3.sk>
 S:	Supported
 F:	drivers/char/pcmcia/scr24x_cs.c
 
-SCSI CDROM DRIVER
-M:	Jens Axboe <axboe@kernel.dk>
-L:	linux-scsi@vger.kernel.org
-S:	Maintained
-W:	http://www.kernel.dk
-F:	drivers/scsi/sr*
-
 SCSI RDMA PROTOCOL (SRP) INITIATOR
 M:	Bart Van Assche <bvanassche@acm.org>
 L:	linux-rdma@vger.kernel.org
@@ -16955,7 +16973,6 @@ F:	drivers/misc/sgi-xp/
 
 SHARED MEMORY COMMUNICATIONS (SMC) SOCKETS
 M:	Karsten Graul <kgraul@linux.ibm.com>
-M:	Guvenc Gulce <guvenc@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -17800,7 +17817,6 @@ F:	drivers/staging/nvec/
 
 STAGING - OLPC SECONDARY DISPLAY CONTROLLER (DCON)
 M:	Jens Frederich <jfrederich@gmail.com>
-M:	Daniel Drake <dsd@laptop.org>
 M:	Jon Nettleton <jon.nettleton@gmail.com>
 S:	Maintained
 W:	http://wiki.laptop.org/go/DCON
@@ -17969,10 +17985,11 @@ F:	Documentation/admin-guide/svga.rst
 F:	arch/x86/boot/video*
 
 SWIOTLB SUBSYSTEM
-M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+M:	Christoph Hellwig <hch@infradead.org>
 L:	iommu@lists.linux-foundation.org
 S:	Supported
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb.git
+W:	http://git.infradead.org/users/hch/dma-mapping.git
+T:	git git://git.infradead.org/users/hch/dma-mapping.git
 F:	arch/*/kernel/pci-swiotlb.c
 F:	include/linux/swiotlb.h
 F:	kernel/dma/swiotlb.c
@@ -17988,7 +18005,7 @@ F:	net/switchdev/
 SY8106A REGULATOR DRIVER
 M:	Icenowy Zheng <icenowy@aosc.io>
 S:	Maintained
-F:	Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt
+F:	Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml
 F:	drivers/regulator/sy8106a-regulator.c
 
 SYNC FILE FRAMEWORK
@@ -18555,13 +18572,14 @@ T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-raremono.c
 
 THERMAL
-M:	Zhang Rui <rui.zhang@intel.com>
+M:	Rafael J. Wysocki <rafael@kernel.org>
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 R:	Amit Kucheria <amitk@kernel.org>
+R:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 Q:	https://patchwork.kernel.org/project/linux-pm/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git thermal
 F:	Documentation/devicetree/bindings/thermal/
 F:	drivers/thermal/
 F:	include/linux/cpu_cooling.h
@@ -18690,7 +18708,7 @@ F:	include/linux/clk/ti.h
 
 TI DAVINCI MACHINE SUPPORT
 M:	Sekhar Nori <nsekhar@ti.com>
-R:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
+R:	Bartosz Golaszewski <brgl@bgdev.pl>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
@@ -19289,13 +19307,12 @@ S:	Maintained
 F:	drivers/usb/misc/chaoskey.c
 
 USB CYPRESS C67X00 DRIVER
-M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	linux-usb@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/usb/c67x00/
 
 USB DAVICOM DM9601 DRIVER
-M:	Peter Korsgaard <jacmet@sunsite.dk>
+M:	Peter Korsgaard <peter@korsgaard.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 W:	http://www.linux-usb.org/usbnet
@@ -20475,7 +20492,6 @@ F:	samples/bpf/xdpsock*
 F:	tools/lib/bpf/xsk*
 
 XEN BLOCK SUBSYSTEM
-M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 M:	Roger Pau Monné <roger.pau@citrix.com>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 S:	Supported
@@ -20523,7 +20539,7 @@ S:	Supported
 F:	drivers/net/xen-netback/*
 
 XEN PCI SUBSYSTEM
-M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+M:	Juergen Gross <jgross@suse.com>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 S:	Supported
 F:	arch/x86/pci/*xen*
@@ -20546,7 +20562,8 @@ S:	Supported
 F:	sound/xen/*
 
 XEN SWIOTLB SUBSYSTEM
-M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+M:	Juergen Gross <jgross@suse.com>
+M:	Stefano Stabellini <sstabellini@kernel.org>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 L:	iommu@lists.linux-foundation.org
 S:	Supported
@@ -20705,7 +20722,6 @@ S:	Maintained
 F:	mm/zbud.c
 
 ZD1211RW WIRELESS DRIVER
-M:	Daniel Drake <dsd@gentoo.org>
 M:	Ulrich Kunitz <kune@deine-taler.de>
 L:	linux-wireless@vger.kernel.org
 L:	zd1211-devs@lists.sourceforge.net (subscribers-only)

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 15
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc6
 NAME = Opossums on Parade
 
 # *DOCUMENTATION*
@@ -849,12 +849,6 @@ endif
 
 DEBUG_CFLAGS	:=
 
-# Workaround for GCC versions < 5.0
-# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61801
-ifdef CONFIG_CC_IS_GCC
-DEBUG_CFLAGS	+= $(call cc-ifversion, -lt, 0500, $(call cc-option, -fno-var-tracking-assignments))
-endif
-
 ifdef CONFIG_DEBUG_INFO
 
 ifdef CONFIG_DEBUG_INFO_SPLIT

arch/alpha/Kconfig

@@ -20,7 +20,7 @@ config ALPHA
 	select NEED_SG_DMA_LENGTH
 	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
-	select GENERIC_PCI_IOMAP if PCI
+	select GENERIC_PCI_IOMAP
 	select AUTO_IRQ_AFFINITY if SMP
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_IPC_PARSE_VERSION
@@ -199,7 +199,6 @@ config ALPHA_EIGER
 
 config ALPHA_JENSEN
 	bool "Jensen"
-	depends on BROKEN
 	select HAVE_EISA
 	help
 	  DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one

arch/alpha/include/asm/asm-prototypes.h

@@ -16,3 +16,4 @@ extern void __divlu(void);
 extern void __remlu(void);
 extern void __divqu(void);
 extern void __remqu(void);
+extern unsigned long __udiv_qrnnd(unsigned long *, unsigned long, unsigned long , unsigned long);

arch/alpha/include/asm/io.h

@@ -60,7 +60,7 @@ extern inline void set_hae(unsigned long new_hae)
  * Change virtual addresses to physical addresses and vv.
  */
 #ifdef USE_48_BIT_KSEG
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
 	return (unsigned long)address - IDENT_ADDR;
 }
@@ -70,7 +70,7 @@ static inline void * phys_to_virt(unsigned long address)
 	return (void *) (address + IDENT_ADDR);
 }
 #else
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
         unsigned long phys = (unsigned long)address;
 
@@ -106,7 +106,7 @@ static inline void * phys_to_virt(unsigned long address)
 extern unsigned long __direct_map_base;
 extern unsigned long __direct_map_size;
 
-static inline unsigned long __deprecated virt_to_bus(void *address)
+static inline unsigned long __deprecated virt_to_bus(volatile void *address)
 {
 	unsigned long phys = virt_to_phys(address);
 	unsigned long bus = phys + __direct_map_base;

arch/alpha/include/asm/jensen.h

@@ -111,18 +111,18 @@ __EXTERN_INLINE void jensen_set_hae(unsigned long addr)
  * convinced that I need one of the newer machines.
  */
 
-static inline unsigned int jensen_local_inb(unsigned long addr)
+__EXTERN_INLINE unsigned int jensen_local_inb(unsigned long addr)
 {
 	return 0xff & *(vuip)((addr << 9) + EISA_VL82C106);
 }
 
-static inline void jensen_local_outb(u8 b, unsigned long addr)
+__EXTERN_INLINE void jensen_local_outb(u8 b, unsigned long addr)
 {
 	*(vuip)((addr << 9) + EISA_VL82C106) = b;
 	mb();
 }
 
-static inline unsigned int jensen_bus_inb(unsigned long addr)
+__EXTERN_INLINE unsigned int jensen_bus_inb(unsigned long addr)
 {
 	long result;
 
@@ -131,7 +131,7 @@ static inline unsigned int jensen_bus_inb(unsigned long addr)
 	return __kernel_extbl(result, addr & 3);
 }
 
-static inline void jensen_bus_outb(u8 b, unsigned long addr)
+__EXTERN_INLINE void jensen_bus_outb(u8 b, unsigned long addr)
 {
 	jensen_set_hae(0);
 	*(vuip)((addr << 7) + EISA_IO + 0x00) = b * 0x01010101;

arch/alpha/include/asm/setup.h

@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __ALPHA_SETUP_H
+#define __ALPHA_SETUP_H
+
+#include <uapi/asm/setup.h>
+
+/*
+ * We leave one page for the initial stack page, and one page for
+ * the initial process structure. Also, the console eats 3 MB for
+ * the initial bootloader (one of which we can reclaim later).
+ */
+#define BOOT_PCB	0x20000000
+#define BOOT_ADDR	0x20000000
+/* Remove when official MILO sources have ELF support: */
+#define BOOT_SIZE	(16*1024)
+
+#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
+#define KERNEL_START_PHYS	0x300000 /* Old bootloaders hardcoded this.  */
+#else
+#define KERNEL_START_PHYS	0x1000000 /* required: Wildfire/Titan/Marvel */
+#endif
+
+#define KERNEL_START	(PAGE_OFFSET+KERNEL_START_PHYS)
+#define SWAPPER_PGD	KERNEL_START
+#define INIT_STACK	(PAGE_OFFSET+KERNEL_START_PHYS+0x02000)
+#define EMPTY_PGT	(PAGE_OFFSET+KERNEL_START_PHYS+0x04000)
+#define EMPTY_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x08000)
+#define ZERO_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x0A000)
+
+#define START_ADDR	(PAGE_OFFSET+KERNEL_START_PHYS+0x10000)
+
+/*
+ * This is setup by the secondary bootstrap loader.  Because
+ * the zero page is zeroed out as soon as the vm system is
+ * initialized, we need to copy things out into a more permanent
+ * place.
+ */
+#define PARAM			ZERO_PGE
+#define COMMAND_LINE		((char *)(absolute_pointer(PARAM + 0x0000)))
+#define INITRD_START		(*(unsigned long *) (PARAM+0x100))
+#define INITRD_SIZE		(*(unsigned long *) (PARAM+0x108))
+
+#endif

arch/alpha/include/uapi/asm/setup.h

@@ -1,43 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ALPHA_SETUP_H
+#ifndef _UAPI__ALPHA_SETUP_H
-#define __ALPHA_SETUP_H
+#define _UAPI__ALPHA_SETUP_H
 
 #define COMMAND_LINE_SIZE	256
 
-/*
+#endif /* _UAPI__ALPHA_SETUP_H */
- * We leave one page for the initial stack page, and one page for
- * the initial process structure. Also, the console eats 3 MB for
- * the initial bootloader (one of which we can reclaim later).
- */
-#define BOOT_PCB	0x20000000
-#define BOOT_ADDR	0x20000000
-/* Remove when official MILO sources have ELF support: */
-#define BOOT_SIZE	(16*1024)
-
-#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
-#define KERNEL_START_PHYS	0x300000 /* Old bootloaders hardcoded this.  */
-#else
-#define KERNEL_START_PHYS	0x1000000 /* required: Wildfire/Titan/Marvel */
-#endif
-
-#define KERNEL_START	(PAGE_OFFSET+KERNEL_START_PHYS)
-#define SWAPPER_PGD	KERNEL_START
-#define INIT_STACK	(PAGE_OFFSET+KERNEL_START_PHYS+0x02000)
-#define EMPTY_PGT	(PAGE_OFFSET+KERNEL_START_PHYS+0x04000)
-#define EMPTY_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x08000)
-#define ZERO_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x0A000)
-
-#define START_ADDR	(PAGE_OFFSET+KERNEL_START_PHYS+0x10000)
-
-/*
- * This is setup by the secondary bootstrap loader.  Because
- * the zero page is zeroed out as soon as the vm system is
- * initialized, we need to copy things out into a more permanent
- * place.
- */
-#define PARAM			ZERO_PGE
-#define COMMAND_LINE		((char*)(PARAM + 0x0000))
-#define INITRD_START		(*(unsigned long *) (PARAM+0x100))
-#define INITRD_SIZE		(*(unsigned long *) (PARAM+0x108))
-
-#endif

arch/alpha/kernel/sys_jensen.c

@@ -7,6 +7,11 @@
  *
  * Code supporting the Jensen.
  */
+#define __EXTERN_INLINE
+#include <asm/io.h>
+#include <asm/jensen.h>
+#undef  __EXTERN_INLINE
+
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -17,11 +22,6 @@
 
 #include <asm/ptrace.h>
 
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/jensen.h>
-#undef  __EXTERN_INLINE
-
 #include <asm/dma.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>

arch/alpha/lib/Makefile

@@ -14,6 +14,7 @@ ev6-$(CONFIG_ALPHA_EV6) := ev6-
 ev67-$(CONFIG_ALPHA_EV67) := ev67-
 
 lib-y =	__divqu.o __remqu.o __divlu.o __remlu.o \
+	udiv-qrnnd.o \
 	udelay.o \
 	$(ev6-y)memset.o \
 	$(ev6-y)memcpy.o \

arch/alpha/lib/udiv-qrnnd.S

@@ -25,6 +25,7 @@
  # along with GCC; see the file COPYING.  If not, write to the 
  # Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
  # MA 02111-1307, USA.
+#include <asm/export.h>
 
         .set noreorder
         .set noat
@@ -161,3 +162,4 @@ $Odd:
 	ret	$31,($26),1
 
 	.end	__udiv_qrnnd
+EXPORT_SYMBOL(__udiv_qrnnd)

arch/alpha/math-emu/Makefile

@@ -7,4 +7,4 @@ ccflags-y := -w
 
 obj-$(CONFIG_MATHEMU) += math-emu.o
 
-math-emu-objs := math.o qrnnd.o
+math-emu-objs := math.o

arch/alpha/math-emu/math.c

@@ -403,5 +403,3 @@ alpha_fp_emul_imprecise (struct pt_regs *regs, unsigned long write_mask)
 egress:
 	return si_code;
 }
-
-EXPORT_SYMBOL(__udiv_qrnnd);

arch/arc/include/asm/pgtable.h

@@ -26,11 +26,6 @@ extern char empty_zero_page[PAGE_SIZE];
 
 extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE);
 
-/* Macro to mark a page protection as uncacheable */
-#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) & ~_PAGE_CACHEABLE))
-
-extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE);
-
 /* to cope with aliasing VIPT cache */
 #define HAVE_ARCH_UNMAPPED_AREA