ARM: arm-soc: power management and clock changes

This branch contains a largeish set of updates of power management and
 clock setup. The bulk of it is for OMAP/AM33xx platforms, but also a
 few around hotplug/suspend/resume on Exynos.
 
 It includes a split-up of some of the OMAP clock data into separate
 files which adds to the diffstat, but gross delta is fairly reasonable.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQySrdAAoJEIwa5zzehBx3XBMQAJCgrE/I1vbuiENiVMLpQkN7
 0Y5t89SwoALnme5jsM8vW/H0o6b163FfH+249UNs6dyk6MdCqqSv8cQVvSfCKRKn
 m4JTXS6njSnYgU025klNU9W3FyMuFcgH8b63+c5+sCcqfvdkxrjpNoKqAYNxQlgJ
 6DHgHCKZP3JB1e2EFqViw0GJgZIjTNxlWvx8XLcAShSapQ+Ovq/iAcKo41o7ZadB
 4zV//VkBMv0TLNTs6SoR0EO8qM+2nIUKE8fgPrRxvvb98tuasKPvlSq9VUeIjnYk
 kWjNTQYbD1IkrAMPYrwcpLU3xkEr14wrKDBtPK6GdCDcXzdyKq3fzROOXNsqrLmn
 Y8PkY+J39B59F0DKjyrCjasZyi0tQQV6ps5Xm2X2CB003GWEbo1yu+BodShYEyaL
 7OvkLiVpOtq+LOYcsScHtOGdO9le2O3yZevNRvlrCDCvJUYbXNjaM9ZrWcQuTlJc
 oseYNSRPaIP5PMv2c+Xup9qh/dyAjj8g6gSi9BlDvwVOu/+Cf3laaCAXaFph22jT
 /m8fW2paiP5UJ0gSt1MLAGFxKi0YI/Qxck8G11LJxUwMZd3SIfOPUAY27tnNC4yL
 GRynOi3BFRMUAe/Leu2qgwEyoME5nHn+OmAKb36WTYH/HL+PGzHq84e+Wfdan8ha
 YcSKc1A52LSoYTi4XTUX
 =h2Qo
 -----END PGP SIGNATURE-----

Merge tag 'pm-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC power management and clock changes from Olof Johansson:
 "This branch contains a largeish set of updates of power management and
  clock setup.  The bulk of it is for OMAP/AM33xx platforms, but also a
  few around hotplug/suspend/resume on Exynos.

  It includes a split-up of some of the OMAP clock data into separate
  files which adds to the diffstat, but gross delta is fairly reasonable."

* tag 'pm-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
  ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h
  ASoC: OMAP: mcbsp fixes for enabling ARM multiplatform support
  watchdog: OMAP: fixup for ARM multiplatform support
  ARM: EXYNOS: Add flush_cache_all in suspend finisher
  ARM: EXYNOS: Remove scu_enable from cpuidle
  ARM: EXYNOS: Fix soft reboot hang after suspend/resume
  ARM: EXYNOS: Add support for rtc wakeup
  ARM: EXYNOS: fix the hotplug for Cortex-A15
  ARM: OMAP2+: omap_device: Correct resource handling for DT boot
  ARM: OMAP2+: hwmod: Add possibility to count hwmod resources based on type
  ARM: OMAP2+: hwmod: Add support for per hwmod/module context lost count
  ARM: OMAP2+: PRM: initialize some PRM functions early
  ARM: OMAP2+: voltage: fixup oscillator handling when CONFIG_PM=n
  ARM: OMAP4: USB: power down MUSB PHY during boot
  ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP2xxx: clock: drop obsolete clock data
  ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts
  ARM: OMAP3+: DPLL: drop !CONFIG_COMMON_CLK sections
  ARM: AM33xx: clock: drop obsolete clock data
  ARM: OMAP3xxx: clk: drop obsolete clock data
  ...
This commit is contained in:
Linus Torvalds 2012-12-13 10:58:20 -08:00
commit a11da7df65
131 changed files with 13057 additions and 14177 deletions

View File

@ -680,6 +680,8 @@ void __init exynos5_init_irq(void)
* uses GIC instead of VIC.
*/
s5p_init_irq(NULL, 0);
gic_arch_extn.irq_set_wake = s3c_irq_wake;
}
struct bus_type exynos_subsys = {

View File

@ -116,7 +116,8 @@ static int exynos4_enter_core0_aftr(struct cpuidle_device *dev,
cpu_suspend(0, idle_finisher);
#ifdef CONFIG_SMP
scu_enable(S5P_VA_SCU);
if (!soc_is_exynos5250())
scu_enable(S5P_VA_SCU);
#endif
cpu_pm_exit();

View File

@ -20,10 +20,11 @@
#include <asm/smp_plat.h>
#include <mach/regs-pmu.h>
#include <plat/cpu.h>
#include "common.h"
static inline void cpu_enter_lowpower(void)
static inline void cpu_enter_lowpower_a9(void)
{
unsigned int v;
@ -45,6 +46,35 @@ static inline void cpu_enter_lowpower(void)
: "cc");
}
static inline void cpu_enter_lowpower_a15(void)
{
unsigned int v;
asm volatile(
" mrc p15, 0, %0, c1, c0, 0\n"
" bic %0, %0, %1\n"
" mcr p15, 0, %0, c1, c0, 0\n"
: "=&r" (v)
: "Ir" (CR_C)
: "cc");
flush_cache_louis();
asm volatile(
/*
* Turn off coherency
*/
" mrc p15, 0, %0, c1, c0, 1\n"
" bic %0, %0, %1\n"
" mcr p15, 0, %0, c1, c0, 1\n"
: "=&r" (v)
: "Ir" (0x40)
: "cc");
isb();
dsb();
}
static inline void cpu_leave_lowpower(void)
{
unsigned int v;
@ -103,11 +133,20 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
void __ref exynos_cpu_die(unsigned int cpu)
{
int spurious = 0;
int primary_part = 0;
/*
* we're ready for shutdown now, so do it
* we're ready for shutdown now, so do it.
* Exynos4 is A9 based while Exynos5 is A15; check the CPU part
* number by reading the Main ID register and then perform the
* appropriate sequence for entering low power.
*/
cpu_enter_lowpower();
asm("mrc p15, 0, %0, c0, c0, 0" : "=r"(primary_part) : : "cc");
if ((primary_part & 0xfff0) == 0xc0f0)
cpu_enter_lowpower_a15();
else
cpu_enter_lowpower_a9();
platform_do_lowpower(cpu, &spurious);
/*

View File

@ -81,6 +81,9 @@ static int exynos_cpu_suspend(unsigned long arg)
outer_flush_all();
#endif
if (soc_is_exynos5250())
flush_cache_all();
/* issue the standby signal into the pm unit. */
cpu_do_idle();
@ -312,6 +315,10 @@ static void exynos_pm_resume(void)
}
early_wakeup:
/* Clear SLEEP mode set in INFORM1 */
__raw_writel(0x0, S5P_INFORM1);
return;
}

View File

@ -39,7 +39,7 @@
#include <asm/mach/map.h>
#include <mach/mux.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>

View File

@ -43,7 +43,7 @@
#include <mach/mux.h>
#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include <mach/flash.h>
#include <mach/hardware.h>

View File

@ -37,7 +37,7 @@
#include <mach/flash.h>
#include <mach/mux.h>
#include <mach/tc.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>

View File

@ -36,7 +36,7 @@
#include <mach/flash.h>
#include <mach/mux.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>

View File

@ -38,7 +38,7 @@
#include <mach/flash.h>
#include <mach/mux.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>

View File

@ -36,7 +36,7 @@
#include <mach/flash.h>
#include <mach/mux.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include <mach/irda.h>
#include <mach/tc.h>
#include <mach/board-sx1.h>

View File

@ -25,7 +25,7 @@
#include <linux/device.h>
#include <linux/io.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include <mach/tc.h>
#include <mach/irqs.h>

View File

@ -18,7 +18,7 @@
#include <mach/mux.h>
#include <mach/tc.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include "iomap.h"
#include "common.h"

View File

@ -27,7 +27,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include <mach/hardware.h>
#include <mach/lcdc.h>

View File

@ -19,7 +19,7 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include <mach/mux.h>
#include "soc.h"
#include <linux/platform_data/asoc-ti-mcbsp.h>

View File

@ -52,7 +52,7 @@
#include <mach/tc.h>
#include <mach/mux.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include <plat/dmtimer.h>
#include <mach/irqs.h>

View File

@ -34,6 +34,7 @@ config ARCH_OMAP2
select CPU_V6
select MULTI_IRQ_HANDLER
select SOC_HAS_OMAP2_SDRC
select COMMON_CLK
config ARCH_OMAP3
bool "TI OMAP3"
@ -47,6 +48,7 @@ config ARCH_OMAP3
select PM_OPP if PM
select PM_RUNTIME if CPU_IDLE
select SOC_HAS_OMAP2_SDRC
select COMMON_CLK
select USB_ARCH_HAS_EHCI if USB_SUPPORT
config ARCH_OMAP4
@ -68,6 +70,7 @@ config ARCH_OMAP4
select PM_OPP if PM
select PM_RUNTIME if CPU_IDLE
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select COMMON_CLK
config SOC_OMAP5
bool "TI OMAP5"
@ -77,6 +80,7 @@ config SOC_OMAP5
select CPU_V7
select HAVE_SMP
select SOC_HAS_REALTIME_COUNTER
select COMMON_CLK
comment "OMAP Core Type"
depends on ARCH_OMAP2
@ -111,6 +115,7 @@ config SOC_AM33XX
select ARM_CPU_SUSPEND if PM
select CPU_V7
select MULTI_IRQ_HANDLER
select COMMON_CLK
config OMAP_PACKAGE_ZAF
bool

View File

@ -160,17 +160,17 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_apll.o clkt2xxx_osc.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o
obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o
obj-$(CONFIG_SOC_OMAP2420) += cclock2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o cclock2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o clock3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o cclock3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) cclock44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
obj-$(CONFIG_SOC_AM33XX) += clock33xx_data.o
obj-$(CONFIG_SOC_AM33XX) += cclock33xx_data.o
obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o

View File

@ -31,7 +31,7 @@
#include <asm/mach/map.h>
#include "common.h"
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>

View File

@ -32,7 +32,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include <plat/debug-devices.h>
#include <video/omapdss.h>

View File

@ -31,7 +31,7 @@
#include <asm/system_info.h>
#include "common.h"
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include "gpmc-smc91x.h"
#include "board-rx51.h"

View File

@ -24,7 +24,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include "common.h"
#include "mux.h"

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,961 @@
/*
* AM33XX Clock data
*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
* Vaibhav Hiremath <hvaibhav@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/clk-private.h>
#include <linux/clkdev.h>
#include <linux/io.h>
#include "am33xx.h"
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "control.h"
#include "cm.h"
#include "cm33xx.h"
#include "cm-regbits-33xx.h"
#include "prm.h"
/* Modulemode control */
#define AM33XX_MODULEMODE_HWCTRL_SHIFT 0
#define AM33XX_MODULEMODE_SWCTRL_SHIFT 1
/*LIST_HEAD(clocks);*/
/* Root clocks */
/* RTC 32k */
DEFINE_CLK_FIXED_RATE(clk_32768_ck, CLK_IS_ROOT, 32768, 0x0);
/* On-Chip 32KHz RC OSC */
DEFINE_CLK_FIXED_RATE(clk_rc32k_ck, CLK_IS_ROOT, 32000, 0x0);
/* Crystal input clks */
DEFINE_CLK_FIXED_RATE(virt_19200000_ck, CLK_IS_ROOT, 19200000, 0x0);
DEFINE_CLK_FIXED_RATE(virt_24000000_ck, CLK_IS_ROOT, 24000000, 0x0);
DEFINE_CLK_FIXED_RATE(virt_25000000_ck, CLK_IS_ROOT, 25000000, 0x0);
DEFINE_CLK_FIXED_RATE(virt_26000000_ck, CLK_IS_ROOT, 26000000, 0x0);
/* Oscillator clock */
/* 19.2, 24, 25 or 26 MHz */
static const char *sys_clkin_ck_parents[] = {
"virt_19200000_ck", "virt_24000000_ck", "virt_25000000_ck",
"virt_26000000_ck",
};
/*
* sys_clk in: input to the dpll and also used as funtional clock for,
* adc_tsc, smartreflex0-1, timer1-7, mcasp0-1, dcan0-1, cefuse
*
*/
DEFINE_CLK_MUX(sys_clkin_ck, sys_clkin_ck_parents, NULL, 0x0,
AM33XX_CTRL_REGADDR(AM33XX_CONTROL_STATUS),
AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT,
AM33XX_CONTROL_STATUS_SYSBOOT1_WIDTH,
0, NULL);
/* External clock - 12 MHz */
DEFINE_CLK_FIXED_RATE(tclkin_ck, CLK_IS_ROOT, 12000000, 0x0);
/* Module clocks and DPLL outputs */
/* DPLL_CORE */
static struct dpll_data dpll_core_dd = {
.mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_CORE,
.clk_bypass = &sys_clkin_ck,
.clk_ref = &sys_clkin_ck,
.control_reg = AM33XX_CM_CLKMODE_DPLL_CORE,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
.idlest_reg = AM33XX_CM_IDLEST_DPLL_CORE,
.mult_mask = AM33XX_DPLL_MULT_MASK,
.div1_mask = AM33XX_DPLL_DIV_MASK,
.enable_mask = AM33XX_DPLL_EN_MASK,
.idlest_mask = AM33XX_ST_DPLL_CLK_MASK,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
};
/* CLKDCOLDO output */
static const char *dpll_core_ck_parents[] = {
"sys_clkin_ck",
};
static struct clk dpll_core_ck;
static const struct clk_ops dpll_core_ck_ops = {
.recalc_rate = &omap3_dpll_recalc,
.get_parent = &omap2_init_dpll_parent,
};
static struct clk_hw_omap dpll_core_ck_hw = {
.hw = {
.clk = &dpll_core_ck,
},
.dpll_data = &dpll_core_dd,
.ops = &clkhwops_omap3_dpll,
};
DEFINE_STRUCT_CLK(dpll_core_ck, dpll_core_ck_parents, dpll_core_ck_ops);
static const char *dpll_core_x2_ck_parents[] = {
"dpll_core_ck",
};
static struct clk dpll_core_x2_ck;
static const struct clk_ops dpll_x2_ck_ops = {
.recalc_rate = &omap3_clkoutx2_recalc,
};
static struct clk_hw_omap dpll_core_x2_ck_hw = {
.hw = {
.clk = &dpll_core_x2_ck,
},
.flags = CLOCK_CLKOUTX2,
};
DEFINE_STRUCT_CLK(dpll_core_x2_ck, dpll_core_x2_ck_parents, dpll_x2_ck_ops);
DEFINE_CLK_DIVIDER(dpll_core_m4_ck, "dpll_core_x2_ck", &dpll_core_x2_ck,
0x0, AM33XX_CM_DIV_M4_DPLL_CORE,
AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT,
AM33XX_HSDIVIDER_CLKOUT1_DIV_WIDTH, CLK_DIVIDER_ONE_BASED,
NULL);
DEFINE_CLK_DIVIDER(dpll_core_m5_ck, "dpll_core_x2_ck", &dpll_core_x2_ck,
0x0, AM33XX_CM_DIV_M5_DPLL_CORE,
AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT,
AM33XX_HSDIVIDER_CLKOUT2_DIV_WIDTH,
CLK_DIVIDER_ONE_BASED, NULL);
DEFINE_CLK_DIVIDER(dpll_core_m6_ck, "dpll_core_x2_ck", &dpll_core_x2_ck,
0x0, AM33XX_CM_DIV_M6_DPLL_CORE,
AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT,
AM33XX_HSDIVIDER_CLKOUT3_DIV_WIDTH,
CLK_DIVIDER_ONE_BASED, NULL);
/* DPLL_MPU */
static struct dpll_data dpll_mpu_dd = {
.mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_MPU,
.clk_bypass = &sys_clkin_ck,
.clk_ref = &sys_clkin_ck,
.control_reg = AM33XX_CM_CLKMODE_DPLL_MPU,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
.idlest_reg = AM33XX_CM_IDLEST_DPLL_MPU,
.mult_mask = AM33XX_DPLL_MULT_MASK,
.div1_mask = AM33XX_DPLL_DIV_MASK,
.enable_mask = AM33XX_DPLL_EN_MASK,
.idlest_mask = AM33XX_ST_DPLL_CLK_MASK,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
};
/* CLKOUT: fdpll/M2 */
static struct clk dpll_mpu_ck;
static const struct clk_ops dpll_mpu_ck_ops = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
.recalc_rate = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
.get_parent = &omap2_init_dpll_parent,
};
static struct clk_hw_omap dpll_mpu_ck_hw = {
.hw = {
.clk = &dpll_mpu_ck,
},
.dpll_data = &dpll_mpu_dd,
.ops = &clkhwops_omap3_dpll,
};
DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_core_ck_parents, dpll_mpu_ck_ops);
/*
* TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
* and ALT_CLK1/2)
*/
DEFINE_CLK_DIVIDER(dpll_mpu_m2_ck, "dpll_mpu_ck", &dpll_mpu_ck,
0x0, AM33XX_CM_DIV_M2_DPLL_MPU, AM33XX_DPLL_CLKOUT_DIV_SHIFT,
AM33XX_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL);
/* DPLL_DDR */
static struct dpll_data dpll_ddr_dd = {
.mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_DDR,
.clk_bypass = &sys_clkin_ck,
.clk_ref = &sys_clkin_ck,
.control_reg = AM33XX_CM_CLKMODE_DPLL_DDR,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
.idlest_reg = AM33XX_CM_IDLEST_DPLL_DDR,
.mult_mask = AM33XX_DPLL_MULT_MASK,
.div1_mask = AM33XX_DPLL_DIV_MASK,
.enable_mask = AM33XX_DPLL_EN_MASK,
.idlest_mask = AM33XX_ST_DPLL_CLK_MASK,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
};
/* CLKOUT: fdpll/M2 */
static struct clk dpll_ddr_ck;
static const struct clk_ops dpll_ddr_ck_ops = {
.recalc_rate = &omap3_dpll_recalc,
.get_parent = &omap2_init_dpll_parent,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
};
static struct clk_hw_omap dpll_ddr_ck_hw = {
.hw = {
.clk = &dpll_ddr_ck,
},
.dpll_data = &dpll_ddr_dd,
.ops = &clkhwops_omap3_dpll,
};
DEFINE_STRUCT_CLK(dpll_ddr_ck, dpll_core_ck_parents, dpll_ddr_ck_ops);
/*
* TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
* and ALT_CLK1/2)
*/
DEFINE_CLK_DIVIDER(dpll_ddr_m2_ck, "dpll_ddr_ck", &dpll_ddr_ck,
0x0, AM33XX_CM_DIV_M2_DPLL_DDR,
AM33XX_DPLL_CLKOUT_DIV_SHIFT, AM33XX_DPLL_CLKOUT_DIV_WIDTH,
CLK_DIVIDER_ONE_BASED, NULL);
/* emif_fck functional clock */
DEFINE_CLK_FIXED_FACTOR(dpll_ddr_m2_div2_ck, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck,
0x0, 1, 2);
/* DPLL_DISP */
static struct dpll_data dpll_disp_dd = {
.mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_DISP,
.clk_bypass = &sys_clkin_ck,
.clk_ref = &sys_clkin_ck,
.control_reg = AM33XX_CM_CLKMODE_DPLL_DISP,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
.idlest_reg = AM33XX_CM_IDLEST_DPLL_DISP,
.mult_mask = AM33XX_DPLL_MULT_MASK,
.div1_mask = AM33XX_DPLL_DIV_MASK,
.enable_mask = AM33XX_DPLL_EN_MASK,
.idlest_mask = AM33XX_ST_DPLL_CLK_MASK,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
};
/* CLKOUT: fdpll/M2 */
static struct clk dpll_disp_ck;
static struct clk_hw_omap dpll_disp_ck_hw = {
.hw = {
.clk = &dpll_disp_ck,
},
.dpll_data = &dpll_disp_dd,
.ops = &clkhwops_omap3_dpll,
};
DEFINE_STRUCT_CLK(dpll_disp_ck, dpll_core_ck_parents, dpll_ddr_ck_ops);
/*
* TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2
* and ALT_CLK1/2)
*/
DEFINE_CLK_DIVIDER(dpll_disp_m2_ck, "dpll_disp_ck", &dpll_disp_ck, 0x0,
AM33XX_CM_DIV_M2_DPLL_DISP, AM33XX_DPLL_CLKOUT_DIV_SHIFT,
AM33XX_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL);
/* DPLL_PER */
static struct dpll_data dpll_per_dd = {
.mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_PERIPH,
.clk_bypass = &sys_clkin_ck,
.clk_ref = &sys_clkin_ck,
.control_reg = AM33XX_CM_CLKMODE_DPLL_PER,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
.idlest_reg = AM33XX_CM_IDLEST_DPLL_PER,
.mult_mask = AM33XX_DPLL_MULT_PERIPH_MASK,
.div1_mask = AM33XX_DPLL_PER_DIV_MASK,
.enable_mask = AM33XX_DPLL_EN_MASK,
.idlest_mask = AM33XX_ST_DPLL_CLK_MASK,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.flags = DPLL_J_TYPE,
};
/* CLKDCOLDO */
static struct clk dpll_per_ck;
static struct clk_hw_omap dpll_per_ck_hw = {
.hw = {
.clk = &dpll_per_ck,
},
.dpll_data = &dpll_per_dd,
.ops = &clkhwops_omap3_dpll,
};
DEFINE_STRUCT_CLK(dpll_per_ck, dpll_core_ck_parents, dpll_ddr_ck_ops);
/* CLKOUT: fdpll/M2 */
DEFINE_CLK_DIVIDER(dpll_per_m2_ck, "dpll_per_ck", &dpll_per_ck, 0x0,
AM33XX_CM_DIV_M2_DPLL_PER, AM33XX_DPLL_CLKOUT_DIV_SHIFT,
AM33XX_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED,
NULL);
DEFINE_CLK_FIXED_FACTOR(dpll_per_m2_div4_wkupdm_ck, "dpll_per_m2_ck",
&dpll_per_m2_ck, 0x0, 1, 4);
DEFINE_CLK_FIXED_FACTOR(dpll_per_m2_div4_ck, "dpll_per_m2_ck",
&dpll_per_m2_ck, 0x0, 1, 4);
DEFINE_CLK_FIXED_FACTOR(dpll_core_m4_div2_ck, "dpll_core_m4_ck",
&dpll_core_m4_ck, 0x0, 1, 2);
DEFINE_CLK_FIXED_FACTOR(l4_rtc_gclk, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0,
1, 2);
DEFINE_CLK_FIXED_FACTOR(clk_24mhz, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0, 1,
8);
/*
* Below clock nodes describes clockdomains derived out
* of core clock.
*/
static const struct clk_ops clk_ops_null = {
};
static const char *l3_gclk_parents[] = {
"dpll_core_m4_ck"
};
static struct clk l3_gclk;
DEFINE_STRUCT_CLK_HW_OMAP(l3_gclk, NULL);
DEFINE_STRUCT_CLK(l3_gclk, l3_gclk_parents, clk_ops_null);
static struct clk l4hs_gclk;
DEFINE_STRUCT_CLK_HW_OMAP(l4hs_gclk, NULL);
DEFINE_STRUCT_CLK(l4hs_gclk, l3_gclk_parents, clk_ops_null);
static const char *l3s_gclk_parents[] = {
"dpll_core_m4_div2_ck"
};
static struct clk l3s_gclk;
DEFINE_STRUCT_CLK_HW_OMAP(l3s_gclk, NULL);
DEFINE_STRUCT_CLK(l3s_gclk, l3s_gclk_parents, clk_ops_null);
static struct clk l4fw_gclk;
DEFINE_STRUCT_CLK_HW_OMAP(l4fw_gclk, NULL);
DEFINE_STRUCT_CLK(l4fw_gclk, l3s_gclk_parents, clk_ops_null);
static struct clk l4ls_gclk;
DEFINE_STRUCT_CLK_HW_OMAP(l4ls_gclk, NULL);
DEFINE_STRUCT_CLK(l4ls_gclk, l3s_gclk_parents, clk_ops_null);
static struct clk sysclk_div_ck;
DEFINE_STRUCT_CLK_HW_OMAP(sysclk_div_ck, NULL);
DEFINE_STRUCT_CLK(sysclk_div_ck, l3_gclk_parents, clk_ops_null);
/*
* In order to match the clock domain with hwmod clockdomain entry,
* separate clock nodes is required for the modules which are
* directly getting their funtioncal clock from sys_clkin.
*/
static struct clk adc_tsc_fck;
DEFINE_STRUCT_CLK_HW_OMAP(adc_tsc_fck, NULL);
DEFINE_STRUCT_CLK(adc_tsc_fck, dpll_core_ck_parents, clk_ops_null);
static struct clk dcan0_fck;
DEFINE_STRUCT_CLK_HW_OMAP(dcan0_fck, NULL);
DEFINE_STRUCT_CLK(dcan0_fck, dpll_core_ck_parents, clk_ops_null);
static struct clk dcan1_fck;
DEFINE_STRUCT_CLK_HW_OMAP(dcan1_fck, NULL);
DEFINE_STRUCT_CLK(dcan1_fck, dpll_core_ck_parents, clk_ops_null);
static struct clk mcasp0_fck;
DEFINE_STRUCT_CLK_HW_OMAP(mcasp0_fck, NULL);
DEFINE_STRUCT_CLK(mcasp0_fck, dpll_core_ck_parents, clk_ops_null);
static struct clk mcasp1_fck;
DEFINE_STRUCT_CLK_HW_OMAP(mcasp1_fck, NULL);
DEFINE_STRUCT_CLK(mcasp1_fck, dpll_core_ck_parents, clk_ops_null);
static struct clk smartreflex0_fck;
DEFINE_STRUCT_CLK_HW_OMAP(smartreflex0_fck, NULL);
DEFINE_STRUCT_CLK(smartreflex0_fck, dpll_core_ck_parents, clk_ops_null);
static struct clk smartreflex1_fck;
DEFINE_STRUCT_CLK_HW_OMAP(smartreflex1_fck, NULL);
DEFINE_STRUCT_CLK(smartreflex1_fck, dpll_core_ck_parents, clk_ops_null);
/*
* Modules clock nodes
*
* The following clock leaf nodes are added for the moment because:
*
* - hwmod data is not present for these modules, either hwmod
* control is not required or its not populated.
* - Driver code is not yet migrated to use hwmod/runtime pm
* - Modules outside kernel access (to disable them by default)
*
* - debugss
* - mmu (gfx domain)
* - cefuse
* - usbotg_fck (its additional clock and not really a modulemode)
* - ieee5000
*/
DEFINE_CLK_GATE(debugss_ick, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0,
AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
0x0, NULL);
DEFINE_CLK_GATE(mmu_fck, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0,
AM33XX_CM_GFX_MMUDATA_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
0x0, NULL);
DEFINE_CLK_GATE(cefuse_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0,
AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
0x0, NULL);
/*
* clkdiv32 is generated from fixed division of 732.4219
*/
DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732);
DEFINE_CLK_GATE(clkdiv32k_ick, "clkdiv32k_ck", &clkdiv32k_ck, 0x0,
AM33XX_CM_PER_CLKDIV32K_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
0x0, NULL);
/* "usbotg_fck" is an additional clock and not really a modulemode */
DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0,
AM33XX_CM_CLKDCOLDO_DPLL_PER, AM33XX_ST_DPLL_CLKDCOLDO_SHIFT,
0x0, NULL);
DEFINE_CLK_GATE(ieee5000_fck, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck,
0x0, AM33XX_CM_PER_IEEE5000_CLKCTRL,
AM33XX_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
/* Timers */
static const struct clksel timer1_clkmux_sel[] = {
{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
{ .parent = &clkdiv32k_ick, .rates = div_1_1_rates },
{ .parent = &tclkin_ck, .rates = div_1_2_rates },
{ .parent = &clk_rc32k_ck, .rates = div_1_3_rates },
{ .parent = &clk_32768_ck, .rates = div_1_4_rates },
{ .parent = NULL },
};
static const char *timer1_ck_parents[] = {
"sys_clkin_ck", "clkdiv32k_ick", "tclkin_ck", "clk_rc32k_ck",
"clk_32768_ck",
};
static struct clk timer1_fck;
static const struct clk_ops timer1_fck_ops = {
.recalc_rate = &omap2_clksel_recalc,
.get_parent = &omap2_clksel_find_parent_index,
.set_parent = &omap2_clksel_set_parent,
.init = &omap2_init_clk_clkdm,
};
static struct clk_hw_omap timer1_fck_hw = {
.hw = {
.clk = &timer1_fck,
},
.clkdm_name = "l4ls_clkdm",
.clksel = timer1_clkmux_sel,
.clksel_reg = AM33XX_CLKSEL_TIMER1MS_CLK,
.clksel_mask = AM33XX_CLKSEL_0_2_MASK,
};
DEFINE_STRUCT_CLK(timer1_fck, timer1_ck_parents, timer1_fck_ops);
static const struct clksel timer2_to_7_clk_sel[] = {
{ .parent = &tclkin_ck, .rates = div_1_0_rates },
{ .parent = &sys_clkin_ck, .rates = div_1_1_rates },
{ .parent = &clkdiv32k_ick, .rates = div_1_2_rates },
{ .parent = NULL },
};
static const char *timer2_to_7_ck_parents[] = {
"tclkin_ck", "sys_clkin_ck", "clkdiv32k_ick",
};
static struct clk timer2_fck;
static struct clk_hw_omap timer2_fck_hw = {
.hw = {
.clk = &timer2_fck,
},
.clkdm_name = "l4ls_clkdm",
.clksel = timer2_to_7_clk_sel,
.clksel_reg = AM33XX_CLKSEL_TIMER2_CLK,
.clksel_mask = AM33XX_CLKSEL_0_1_MASK,
};
DEFINE_STRUCT_CLK(timer2_fck, timer2_to_7_ck_parents, timer1_fck_ops);
static struct clk timer3_fck;
static struct clk_hw_omap timer3_fck_hw = {
.hw = {
.clk = &timer3_fck,
},
.clkdm_name = "l4ls_clkdm",
.clksel = timer2_to_7_clk_sel,
.clksel_reg = AM33XX_CLKSEL_TIMER3_CLK,
.clksel_mask = AM33XX_CLKSEL_0_1_MASK,
};
DEFINE_STRUCT_CLK(timer3_fck, timer2_to_7_ck_parents, timer1_fck_ops);
static struct clk timer4_fck;
static struct clk_hw_omap timer4_fck_hw = {
.hw = {
.clk = &timer4_fck,
},
.clkdm_name = "l4ls_clkdm",
.clksel = timer2_to_7_clk_sel,
.clksel_reg = AM33XX_CLKSEL_TIMER4_CLK,
.clksel_mask = AM33XX_CLKSEL_0_1_MASK,
};
DEFINE_STRUCT_CLK(timer4_fck, timer2_to_7_ck_parents, timer1_fck_ops);
static struct clk timer5_fck;
static struct clk_hw_omap timer5_fck_hw = {
.hw = {
.clk = &timer5_fck,
},
.clkdm_name = "l4ls_clkdm",
.clksel = timer2_to_7_clk_sel,
.clksel_reg = AM33XX_CLKSEL_TIMER5_CLK,
.clksel_mask = AM33XX_CLKSEL_0_1_MASK,
};
DEFINE_STRUCT_CLK(timer5_fck, timer2_to_7_ck_parents, timer1_fck_ops);
static struct clk timer6_fck;
static struct clk_hw_omap timer6_fck_hw = {
.hw = {
.clk = &timer6_fck,
},
.clkdm_name = "l4ls_clkdm",
.clksel = timer2_to_7_clk_sel,
.clksel_reg = AM33XX_CLKSEL_TIMER6_CLK,
.clksel_mask = AM33XX_CLKSEL_0_1_MASK,
};
DEFINE_STRUCT_CLK(timer6_fck, timer2_to_7_ck_parents, timer1_fck_ops);
static struct clk timer7_fck;
static struct clk_hw_omap timer7_fck_hw = {
.hw = {
.clk = &timer7_fck,
},
.clkdm_name = "l4ls_clkdm",
.clksel = timer2_to_7_clk_sel,
.clksel_reg = AM33XX_CLKSEL_TIMER7_CLK,
.clksel_mask = AM33XX_CLKSEL_0_1_MASK,
};
DEFINE_STRUCT_CLK(timer7_fck, timer2_to_7_ck_parents, timer1_fck_ops);
DEFINE_CLK_FIXED_FACTOR(cpsw_125mhz_gclk,
"dpll_core_m5_ck",
&dpll_core_m5_ck,
0x0,
1, 2);
static const struct clk_ops cpsw_fck_ops = {
.recalc_rate = &omap2_clksel_recalc,
.get_parent = &omap2_clksel_find_parent_index,
.set_parent = &omap2_clksel_set_parent,
};
static const struct clksel cpsw_cpts_rft_clkmux_sel[] = {
{ .parent = &dpll_core_m5_ck, .rates = div_1_0_rates },
{ .parent = &dpll_core_m4_ck, .rates = div_1_1_rates },
{ .parent = NULL },
};
static const char *cpsw_cpts_rft_ck_parents[] = {
"dpll_core_m5_ck", "dpll_core_m4_ck",
};
static struct clk cpsw_cpts_rft_clk;
static struct clk_hw_omap cpsw_cpts_rft_clk_hw = {
.hw = {
.clk = &cpsw_cpts_rft_clk,
},
.clkdm_name = "cpsw_125mhz_clkdm",
.clksel = cpsw_cpts_rft_clkmux_sel,
.clksel_reg = AM33XX_CM_CPTS_RFT_CLKSEL,
.clksel_mask = AM33XX_CLKSEL_0_0_MASK,
};
DEFINE_STRUCT_CLK(cpsw_cpts_rft_clk, cpsw_cpts_rft_ck_parents, cpsw_fck_ops);
/* gpio */
static const char *gpio0_ck_parents[] = {
"clk_rc32k_ck", "clk_32768_ck", "clkdiv32k_ick",
};
static const struct clksel gpio0_dbclk_mux_sel[] = {
{ .parent = &clk_rc32k_ck, .rates = div_1_0_rates },
{ .parent = &clk_32768_ck, .rates = div_1_1_rates },
{ .parent = &clkdiv32k_ick, .rates = div_1_2_rates },
{ .parent = NULL },
};
static const struct clk_ops gpio_fck_ops = {
.recalc_rate = &omap2_clksel_recalc,
.get_parent = &omap2_clksel_find_parent_index,
.set_parent = &omap2_clksel_set_parent,
.init = &omap2_init_clk_clkdm,
};
static struct clk gpio0_dbclk_mux_ck;
static struct clk_hw_omap gpio0_dbclk_mux_ck_hw = {
.hw = {
.clk = &gpio0_dbclk_mux_ck,
},
.clkdm_name = "l4_wkup_clkdm",
.clksel = gpio0_dbclk_mux_sel,
.clksel_reg = AM33XX_CLKSEL_GPIO0_DBCLK,
.clksel_mask = AM33XX_CLKSEL_0_1_MASK,
};
DEFINE_STRUCT_CLK(gpio0_dbclk_mux_ck, gpio0_ck_parents, gpio_fck_ops);
DEFINE_CLK_GATE(gpio0_dbclk, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck, 0x0,
AM33XX_CM_WKUP_GPIO0_CLKCTRL,
AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(gpio1_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0,
AM33XX_CM_PER_GPIO1_CLKCTRL,
AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(gpio2_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0,
AM33XX_CM_PER_GPIO2_CLKCTRL,
AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT, 0x0, NULL);
DEFINE_CLK_GATE(gpio3_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0,
AM33XX_CM_PER_GPIO3_CLKCTRL,
AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT, 0x0, NULL);
static const char *pruss_ck_parents[] = {
"l3_gclk", "dpll_disp_m2_ck",
};
static const struct clksel pruss_ocp_clk_mux_sel[] = {
{ .parent = &l3_gclk, .rates = div_1_0_rates },
{ .parent = &dpll_disp_m2_ck, .rates = div_1_1_rates },
{ .parent = NULL },
};
static struct clk pruss_ocp_gclk;
static struct clk_hw_omap pruss_ocp_gclk_hw = {
.hw = {
.clk = &pruss_ocp_gclk,
},
.clkdm_name = "pruss_ocp_clkdm",
.clksel = pruss_ocp_clk_mux_sel,
.clksel_reg = AM33XX_CLKSEL_PRUSS_OCP_CLK,
.clksel_mask = AM33XX_CLKSEL_0_0_MASK,
};
DEFINE_STRUCT_CLK(pruss_ocp_gclk, pruss_ck_parents, gpio_fck_ops);
static const char *lcd_ck_parents[] = {
"dpll_disp_m2_ck", "dpll_core_m5_ck", "dpll_per_m2_ck",
};
static const struct clksel lcd_clk_mux_sel[] = {
{ .parent = &dpll_disp_m2_ck, .rates = div_1_0_rates },
{ .parent = &dpll_core_m5_ck, .rates = div_1_1_rates },
{ .parent = &dpll_per_m2_ck, .rates = div_1_2_rates },
{ .parent = NULL },
};
static struct clk lcd_gclk;
static struct clk_hw_omap lcd_gclk_hw = {
.hw = {
.clk = &lcd_gclk,
},
.clkdm_name = "lcdc_clkdm",
.clksel = lcd_clk_mux_sel,
.clksel_reg = AM33XX_CLKSEL_LCDC_PIXEL_CLK,
.clksel_mask = AM33XX_CLKSEL_0_1_MASK,
};
DEFINE_STRUCT_CLK(lcd_gclk, lcd_ck_parents, gpio_fck_ops);
DEFINE_CLK_FIXED_FACTOR(mmc_clk, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0, 1, 2);
static const char *gfx_ck_parents[] = {
"dpll_core_m4_ck", "dpll_per_m2_ck",
};
static const struct clksel gfx_clksel_sel[] = {
{ .parent = &dpll_core_m4_ck, .rates = div_1_0_rates },
{ .parent = &dpll_per_m2_ck, .rates = div_1_1_rates },
{ .parent = NULL },
};
static struct clk gfx_fclk_clksel_ck;
static struct clk_hw_omap gfx_fclk_clksel_ck_hw = {
.hw = {
.clk = &gfx_fclk_clksel_ck,
},
.clksel = gfx_clksel_sel,
.clksel_reg = AM33XX_CLKSEL_GFX_FCLK,
.clksel_mask = AM33XX_CLKSEL_GFX_FCLK_MASK,
};
DEFINE_STRUCT_CLK(gfx_fclk_clksel_ck, gfx_ck_parents, gpio_fck_ops);
static const struct clk_div_table div_1_0_2_1_rates[] = {
{ .div = 1, .val = 0, },
{ .div = 2, .val = 1, },
{ .div = 0 },
};
DEFINE_CLK_DIVIDER_TABLE(gfx_fck_div_ck, "gfx_fclk_clksel_ck",
&gfx_fclk_clksel_ck, 0x0, AM33XX_CLKSEL_GFX_FCLK,
AM33XX_CLKSEL_0_0_SHIFT, AM33XX_CLKSEL_0_0_WIDTH,
0x0, div_1_0_2_1_rates, NULL);
static const char *sysclkout_ck_parents[] = {
"clk_32768_ck", "l3_gclk", "dpll_ddr_m2_ck", "dpll_per_m2_ck",
"lcd_gclk",
};
static const struct clksel sysclkout_pre_sel[] = {
{ .parent = &clk_32768_ck, .rates = div_1_0_rates },
{ .parent = &l3_gclk, .rates = div_1_1_rates },
{ .parent = &dpll_ddr_m2_ck, .rates = div_1_2_rates },
{ .parent = &dpll_per_m2_ck, .rates = div_1_3_rates },
{ .parent = &lcd_gclk, .rates = div_1_4_rates },
{ .parent = NULL },
};
static struct clk sysclkout_pre_ck;
static struct clk_hw_omap sysclkout_pre_ck_hw = {
.hw = {
.clk = &sysclkout_pre_ck,
},
.clksel = sysclkout_pre_sel,
.clksel_reg = AM33XX_CM_CLKOUT_CTRL,
.clksel_mask = AM33XX_CLKOUT2SOURCE_MASK,
};
DEFINE_STRUCT_CLK(sysclkout_pre_ck, sysclkout_ck_parents, gpio_fck_ops);
/* Divide by 8 clock rates with default clock is 1/1*/
static const struct clk_div_table div8_rates[] = {
{ .div = 1, .val = 0, },
{ .div = 2, .val = 1, },
{ .div = 3, .val = 2, },
{ .div = 4, .val = 3, },
{ .div = 5, .val = 4, },
{ .div = 6, .val = 5, },
{ .div = 7, .val = 6, },
{ .div = 8, .val = 7, },
{ .div = 0 },
};
DEFINE_CLK_DIVIDER_TABLE(clkout2_div_ck, "sysclkout_pre_ck", &sysclkout_pre_ck,
0x0, AM33XX_CM_CLKOUT_CTRL, AM33XX_CLKOUT2DIV_SHIFT,
AM33XX_CLKOUT2DIV_WIDTH, 0x0, div8_rates, NULL);
DEFINE_CLK_GATE(clkout2_ck, "clkout2_div_ck", &clkout2_div_ck, 0x0,
AM33XX_CM_CLKOUT_CTRL, AM33XX_CLKOUT2EN_SHIFT, 0x0, NULL);
static const char *wdt_ck_parents[] = {
"clk_rc32k_ck", "clkdiv32k_ick",
};
static const struct clksel wdt_clkmux_sel[] = {
{ .parent = &clk_rc32k_ck, .rates = div_1_0_rates },
{ .parent = &clkdiv32k_ick, .rates = div_1_1_rates },
{ .parent = NULL },
};
static struct clk wdt1_fck;
static struct clk_hw_omap wdt1_fck_hw = {
.hw = {
.clk = &wdt1_fck,
},
.clkdm_name = "l4_wkup_clkdm",
.clksel = wdt_clkmux_sel,
.clksel_reg = AM33XX_CLKSEL_WDT1_CLK,
.clksel_mask = AM33XX_CLKSEL_0_1_MASK,
};
DEFINE_STRUCT_CLK(wdt1_fck, wdt_ck_parents, gpio_fck_ops);
/*
* clkdev
*/
static struct omap_clk am33xx_clks[] = {
CLK(NULL, "clk_32768_ck", &clk_32768_ck, CK_AM33XX),
CLK(NULL, "clk_rc32k_ck", &clk_rc32k_ck, CK_AM33XX),
CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_AM33XX),
CLK(NULL, "virt_24000000_ck", &virt_24000000_ck, CK_AM33XX),
CLK(NULL, "virt_25000000_ck", &virt_25000000_ck, CK_AM33XX),
CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_AM33XX),
CLK(NULL, "sys_clkin_ck", &sys_clkin_ck, CK_AM33XX),
CLK(NULL, "tclkin_ck", &tclkin_ck, CK_AM33XX),
CLK(NULL, "dpll_core_ck", &dpll_core_ck, CK_AM33XX),
CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck, CK_AM33XX),
CLK(NULL, "dpll_core_m4_ck", &dpll_core_m4_ck, CK_AM33XX),
CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck, CK_AM33XX),
CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck, CK_AM33XX),
CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_AM33XX),
CLK("cpu0", NULL, &dpll_mpu_ck, CK_AM33XX),
CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_AM33XX),
CLK(NULL, "dpll_ddr_ck", &dpll_ddr_ck, CK_AM33XX),
CLK(NULL, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck, CK_AM33XX),
CLK(NULL, "dpll_ddr_m2_div2_ck", &dpll_ddr_m2_div2_ck, CK_AM33XX),
CLK(NULL, "dpll_disp_ck", &dpll_disp_ck, CK_AM33XX),
CLK(NULL, "dpll_disp_m2_ck", &dpll_disp_m2_ck, CK_AM33XX),
CLK(NULL, "dpll_per_ck", &dpll_per_ck, CK_AM33XX),
CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck, CK_AM33XX),
CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", &dpll_per_m2_div4_wkupdm_ck, CK_AM33XX),
CLK(NULL, "dpll_per_m2_div4_ck", &dpll_per_m2_div4_ck, CK_AM33XX),
CLK(NULL, "adc_tsc_fck", &adc_tsc_fck, CK_AM33XX),
CLK(NULL, "cefuse_fck", &cefuse_fck, CK_AM33XX),
CLK(NULL, "clkdiv32k_ck", &clkdiv32k_ck, CK_AM33XX),
CLK(NULL, "clkdiv32k_ick", &clkdiv32k_ick, CK_AM33XX),
CLK(NULL, "dcan0_fck", &dcan0_fck, CK_AM33XX),
CLK("481cc000.d_can", NULL, &dcan0_fck, CK_AM33XX),
CLK(NULL, "dcan1_fck", &dcan1_fck, CK_AM33XX),
CLK("481d0000.d_can", NULL, &dcan1_fck, CK_AM33XX),
CLK(NULL, "debugss_ick", &debugss_ick, CK_AM33XX),
CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk, CK_AM33XX),
CLK(NULL, "mcasp0_fck", &mcasp0_fck, CK_AM33XX),
CLK(NULL, "mcasp1_fck", &mcasp1_fck, CK_AM33XX),
CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX),
CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX),
CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX),
CLK(NULL, "timer1_fck", &timer1_fck, CK_AM33XX),
CLK(NULL, "timer2_fck", &timer2_fck, CK_AM33XX),
CLK(NULL, "timer3_fck", &timer3_fck, CK_AM33XX),
CLK(NULL, "timer4_fck", &timer4_fck, CK_AM33XX),
CLK(NULL, "timer5_fck", &timer5_fck, CK_AM33XX),
CLK(NULL, "timer6_fck", &timer6_fck, CK_AM33XX),
CLK(NULL, "timer7_fck", &timer7_fck, CK_AM33XX),
CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX),
CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX),
CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX),
CLK(NULL, "l4_rtc_gclk", &l4_rtc_gclk, CK_AM33XX),
CLK(NULL, "l3_gclk", &l3_gclk, CK_AM33XX),
CLK(NULL, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck, CK_AM33XX),
CLK(NULL, "l4hs_gclk", &l4hs_gclk, CK_AM33XX),
CLK(NULL, "l3s_gclk", &l3s_gclk, CK_AM33XX),
CLK(NULL, "l4fw_gclk", &l4fw_gclk, CK_AM33XX),
CLK(NULL, "l4ls_gclk", &l4ls_gclk, CK_AM33XX),
CLK(NULL, "clk_24mhz", &clk_24mhz, CK_AM33XX),
CLK(NULL, "sysclk_div_ck", &sysclk_div_ck, CK_AM33XX),
CLK(NULL, "cpsw_125mhz_gclk", &cpsw_125mhz_gclk, CK_AM33XX),
CLK(NULL, "cpsw_cpts_rft_clk", &cpsw_cpts_rft_clk, CK_AM33XX),
CLK(NULL, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck, CK_AM33XX),
CLK(NULL, "gpio0_dbclk", &gpio0_dbclk, CK_AM33XX),
CLK(NULL, "gpio1_dbclk", &gpio1_dbclk, CK_AM33XX),
CLK(NULL, "gpio2_dbclk", &gpio2_dbclk, CK_AM33XX),
CLK(NULL, "gpio3_dbclk", &gpio3_dbclk, CK_AM33XX),
CLK(NULL, "lcd_gclk", &lcd_gclk, CK_AM33XX),
CLK(NULL, "mmc_clk", &mmc_clk, CK_AM33XX),
CLK(NULL, "gfx_fclk_clksel_ck", &gfx_fclk_clksel_ck, CK_AM33XX),
CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX),
CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX),
CLK(NULL, "clkout2_div_ck", &clkout2_div_ck, CK_AM33XX),
CLK(NULL, "timer_32k_ck", &clkdiv32k_ick, CK_AM33XX),
CLK(NULL, "timer_sys_ck", &sys_clkin_ck, CK_AM33XX),
};
static const char *enable_init_clks[] = {
"dpll_ddr_m2_ck",
"dpll_mpu_m2_ck",
"l3_gclk",
"l4hs_gclk",
"l4fw_gclk",
"l4ls_gclk",
};
int __init am33xx_clk_init(void)
{
struct omap_clk *c;
u32 cpu_clkflg;
if (soc_is_am33xx()) {
cpu_mask = RATE_IN_AM33XX;
cpu_clkflg = CK_AM33XX;
}
for (c = am33xx_clks; c < am33xx_clks + ARRAY_SIZE(am33xx_clks); c++) {
if (c->cpu & cpu_clkflg) {
clkdev_add(&c->lk);
if (!__clk_init(NULL, c->lk.clk))
omap2_init_clk_hw_omap_clocks(c->lk.clk);
}
}
omap2_clk_disable_autoidle_all();
omap2_clk_enable_init_clocks(enable_init_clks,
ARRAY_SIZE(enable_init_clks));
/* TRM ERRATA: Timer 3 & 6 default parent (TCLKIN) may not be always
* physically present, in such a case HWMOD enabling of
* clock would be failure with default parent. And timer
* probe thinks clock is already enabled, this leads to
* crash upon accessing timer 3 & 6 registers in probe.
* Fix by setting parent of both these timers to master
* oscillator clock.
*/
clk_set_parent(&timer3_fck, &sys_clkin_ck);
clk_set_parent(&timer6_fck, &sys_clkin_ck);
return 0;
}

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

View File

@ -38,62 +38,88 @@
/* Private functions */
static int _apll96_enable(struct clk *clk)
/**
* omap2xxx_clk_apll_locked - is the APLL locked?
* @hw: struct clk_hw * of the APLL to check
*
* If the APLL IP block referred to by @hw indicates that it's locked,
* return true; otherwise, return false.
*/
static bool omap2xxx_clk_apll_locked(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 r, apll_mask;
apll_mask = EN_APLL_LOCKED << clk->enable_bit;
r = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
return ((r & apll_mask) == apll_mask) ? true : false;
}
int omap2_clk_apll96_enable(struct clk_hw *hw)
{
return omap2xxx_cm_apll96_enable();
}
static int _apll54_enable(struct clk *clk)
int omap2_clk_apll54_enable(struct clk_hw *hw)
{
return omap2xxx_cm_apll54_enable();
}
static void _apll96_allow_idle(struct clk *clk)
static void _apll96_allow_idle(struct clk_hw_omap *clk)
{
omap2xxx_cm_set_apll96_auto_low_power_stop();
}
static void _apll96_deny_idle(struct clk *clk)
static void _apll96_deny_idle(struct clk_hw_omap *clk)
{
omap2xxx_cm_set_apll96_disable_autoidle();
}
static void _apll54_allow_idle(struct clk *clk)
static void _apll54_allow_idle(struct clk_hw_omap *clk)
{
omap2xxx_cm_set_apll54_auto_low_power_stop();
}
static void _apll54_deny_idle(struct clk *clk)
static void _apll54_deny_idle(struct clk_hw_omap *clk)
{
omap2xxx_cm_set_apll54_disable_autoidle();
}
static void _apll96_disable(struct clk *clk)
void omap2_clk_apll96_disable(struct clk_hw *hw)
{
omap2xxx_cm_apll96_disable();
}
static void _apll54_disable(struct clk *clk)
void omap2_clk_apll54_disable(struct clk_hw *hw)
{
omap2xxx_cm_apll54_disable();
}
unsigned long omap2_clk_apll54_recalc(struct clk_hw *hw,
unsigned long parent_rate)
{
return (omap2xxx_clk_apll_locked(hw)) ? 54000000 : 0;
}
unsigned long omap2_clk_apll96_recalc(struct clk_hw *hw,
unsigned long parent_rate)
{
return (omap2xxx_clk_apll_locked(hw)) ? 96000000 : 0;
}
/* Public data */
const struct clkops clkops_apll96 = {
.enable = _apll96_enable,
.disable = _apll96_disable,
.allow_idle = _apll96_allow_idle,
.deny_idle = _apll96_deny_idle,
};
const struct clkops clkops_apll54 = {
.enable = _apll54_enable,
.disable = _apll54_disable,
const struct clk_hw_omap_ops clkhwops_apll54 = {
.allow_idle = _apll54_allow_idle,
.deny_idle = _apll54_deny_idle,
};
const struct clk_hw_omap_ops clkhwops_apll96 = {
.allow_idle = _apll96_allow_idle,
.deny_idle = _apll96_deny_idle,
};
/* Public functions */
u32 omap2xxx_get_apll_clkin(void)

View File

@ -29,7 +29,7 @@
* REVISIT: DPLL can optionally enter low-power bypass by writing 0x1
* instead. Add some mechanism to optionally enter this mode.
*/
static void _allow_idle(struct clk *clk)
static void _allow_idle(struct clk_hw_omap *clk)
{
if (!clk || !clk->dpll_data)
return;
@ -43,7 +43,7 @@ static void _allow_idle(struct clk *clk)
*
* Disable DPLL automatic idle control. No return value.
*/
static void _deny_idle(struct clk *clk)
static void _deny_idle(struct clk_hw_omap *clk)
{
if (!clk || !clk->dpll_data)
return;
@ -53,9 +53,7 @@ static void _deny_idle(struct clk *clk)
/* Public data */
const struct clkops clkops_omap2xxx_dpll_ops = {
const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll = {
.allow_idle = _allow_idle,
.deny_idle = _deny_idle,
};

View File

@ -40,7 +40,7 @@
* (currently defined as "dpll_ck" in the OMAP2xxx clock tree). Set
* during dpll_ck init and used later by omap2xxx_clk_get_core_rate().
*/
static struct clk *dpll_core_ck;
static struct clk_hw_omap *dpll_core_ck;
/**
* omap2xxx_clk_get_core_rate - return the CORE_CLK rate
@ -104,13 +104,16 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate)
}
unsigned long omap2_dpllcore_recalc(struct clk *clk)
unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
unsigned long parent_rate)
{
return omap2xxx_clk_get_core_rate();
}
int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 cur_rate, low, mult, div, valid_rate, done_rate;
u32 bypass = 0;
struct prcm_config tmpset;
@ -188,8 +191,8 @@ int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
* statically defined, this code may need to change to increment some
* kind of use count on dpll_ck.
*/
void omap2xxx_clkt_dpllcore_init(struct clk *clk)
void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw)
{
WARN(dpll_core_ck, "dpll_core_ck already set - should never happen");
dpll_core_ck = clk;
dpll_core_ck = to_clk_hw_omap(hw);
}

View File

@ -35,7 +35,7 @@
* clk_enable/clk_disable()-based usecounting for osc_ck should be
* replaced with autoidle-based usecounting.
*/
static int omap2_enable_osc_ck(struct clk *clk)
int omap2_enable_osc_ck(struct clk_hw *clk)
{
u32 pcc;
@ -53,7 +53,7 @@ static int omap2_enable_osc_ck(struct clk *clk)
* clk_enable/clk_disable()-based usecounting for osc_ck should be
* replaced with autoidle-based usecounting.
*/
static void omap2_disable_osc_ck(struct clk *clk)
void omap2_disable_osc_ck(struct clk_hw *clk)
{
u32 pcc;
@ -62,13 +62,8 @@ static void omap2_disable_osc_ck(struct clk *clk)
__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
}
const struct clkops clkops_oscck = {
.enable = omap2_enable_osc_ck,
.disable = omap2_disable_osc_ck,
};
unsigned long omap2_osc_clk_recalc(struct clk *clk)
unsigned long omap2_osc_clk_recalc(struct clk_hw *clk,
unsigned long parent_rate)
{
return omap2xxx_get_apll_clkin() * omap2xxx_get_sysclkdiv();
}

View File

@ -40,9 +40,8 @@ u32 omap2xxx_get_sysclkdiv(void)
return div;
}
unsigned long omap2xxx_sys_clk_recalc(struct clk *clk)
unsigned long omap2xxx_sys_clk_recalc(struct clk_hw *clk,
unsigned long parent_rate)
{
return clk->parent->rate / omap2xxx_get_sysclkdiv();
return parent_rate / omap2xxx_get_sysclkdiv();
}

View File

@ -58,7 +58,8 @@ static unsigned long sys_ck_rate;
*
* Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
*/
unsigned long omap2_table_mpu_recalc(struct clk *clk)
unsigned long omap2_table_mpu_recalc(struct clk_hw *clk,
unsigned long parent_rate)
{
return curr_prcm_set->mpu_speed;
}
@ -70,7 +71,8 @@ unsigned long omap2_table_mpu_recalc(struct clk *clk)
* Some might argue L3-DDR, others ARM, others IVA. This code is simple and
* just uses the ARM rates.
*/
long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
const struct prcm_config *ptr;
long highest_rate;
@ -93,7 +95,8 @@ long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
}
/* Sets basic clocks based on the specified rate */
int omap2_select_table_rate(struct clk *clk, unsigned long rate)
int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
u32 cur_rate, done_rate, bypass = 0, tmp;
const struct prcm_config *prcm;

View File

@ -44,8 +44,10 @@
* Program the DPLL M2 divider with the rounded target rate. Returns
* -EINVAL upon error, or 0 upon success.
*/
int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 new_div = 0;
u32 unlock_dll = 0;
u32 c;
@ -63,7 +65,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
return -EINVAL;
sdrcrate = __clk_get_rate(sdrc_ick_p);
clkrate = __clk_get_rate(clk);
clkrate = __clk_get_rate(hw->clk);
if (rate > clkrate)
sdrcrate <<= ((rate / clkrate) >> 1);
else
@ -112,8 +114,6 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
0, 0, 0, 0);
clk->rate = rate;
return 0;
}

View File

@ -41,7 +41,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/bug.h>
@ -58,11 +58,14 @@
* the element associated with the supplied parent clock address.
* Returns a pointer to the struct clksel on success or NULL on error.
*/
static const struct clksel *_get_clksel_by_parent(struct clk *clk,
static const struct clksel *_get_clksel_by_parent(struct clk_hw_omap *clk,
struct clk *src_clk)
{
const struct clksel *clks;
if (!src_clk)
return NULL;
for (clks = clk->clksel; clks->parent; clks++)
if (clks->parent == src_clk)
break; /* Found the requested parent */
@ -70,71 +73,13 @@ static const struct clksel *_get_clksel_by_parent(struct clk *clk,
if (!clks->parent) {
/* This indicates a data problem */
WARN(1, "clock: %s: could not find parent clock %s in clksel array\n",
__clk_get_name(clk), __clk_get_name(src_clk));
__clk_get_name(clk->hw.clk), __clk_get_name(src_clk));
return NULL;
}
return clks;
}
/**
* _get_div_and_fieldval() - find the new clksel divisor and field value to use
* @src_clk: planned new parent struct clk *
* @clk: struct clk * that is being reparented
* @field_val: pointer to a u32 to contain the register data for the divisor
*
* Given an intended new parent struct clk * @src_clk, and the struct
* clk * @clk to the clock that is being reparented, find the
* appropriate rate divisor for the new clock (returned as the return
* value), and the corresponding register bitfield data to program to
* reach that divisor (returned in the u32 pointed to by @field_val).
* Returns 0 on error, or returns the newly-selected divisor upon
* success (in this latter case, the corresponding register bitfield
* value is passed back in the variable pointed to by @field_val)
*/
static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk,
u32 *field_val)
{
const struct clksel *clks;
const struct clksel_rate *clkr, *max_clkr = NULL;
u8 max_div = 0;
clks = _get_clksel_by_parent(clk, src_clk);
if (!clks)
return 0;
/*
* Find the highest divisor (e.g., the one resulting in the
* lowest rate) to use as the default. This should avoid
* clock rates that are too high for the device. XXX A better
* solution here would be to try to determine if there is a
* divisor matching the original clock rate before the parent
* switch, and if it cannot be found, to fall back to the
* highest divisor.
*/
for (clkr = clks->rates; clkr->div; clkr++) {
if (!(clkr->flags & cpu_mask))
continue;
if (clkr->div > max_div) {
max_div = clkr->div;
max_clkr = clkr;
}
}
if (max_div == 0) {
/* This indicates an error in the clksel data */
WARN(1, "clock: %s: could not find divisor for parent %s\n",
__clk_get_name(clk),
__clk_get_name(__clk_get_parent(src_clk)));
return 0;
}
*field_val = max_clkr->val;
return max_div;
}
/**
* _write_clksel_reg() - program a clock's clksel register in hardware
* @clk: struct clk * to program
@ -148,7 +93,7 @@ static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk,
* take into account any time the hardware might take to switch the
* clock source.
*/
static void _write_clksel_reg(struct clk *clk, u32 field_val)
static void _write_clksel_reg(struct clk_hw_omap *clk, u32 field_val)
{
u32 v;
@ -171,13 +116,14 @@ static void _write_clksel_reg(struct clk *clk, u32 field_val)
* before calling. Returns 0 on error or returns the actual integer divisor
* upon success.
*/
static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
static u32 _clksel_to_divisor(struct clk_hw_omap *clk, u32 field_val)
{
const struct clksel *clks;
const struct clksel_rate *clkr;
struct clk *parent;
parent = __clk_get_parent(clk);
parent = __clk_get_parent(clk->hw.clk);
clks = _get_clksel_by_parent(clk, parent);
if (!clks)
return 0;
@ -193,7 +139,8 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
if (!clkr->div) {
/* This indicates a data error */
WARN(1, "clock: %s: could not find fieldval %d for parent %s\n",
__clk_get_name(clk), field_val, __clk_get_name(parent));
__clk_get_name(clk->hw.clk), field_val,
__clk_get_name(parent));
return 0;
}
@ -210,7 +157,7 @@ static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
* register field value _before_ left-shifting (i.e., LSB is at bit
* 0); or returns 0xFFFFFFFF (~0) upon error.
*/
static u32 _divisor_to_clksel(struct clk *clk, u32 div)
static u32 _divisor_to_clksel(struct clk_hw_omap *clk, u32 div)
{
const struct clksel *clks;
const struct clksel_rate *clkr;
@ -219,7 +166,7 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div)
/* should never happen */
WARN_ON(div == 0);
parent = __clk_get_parent(clk);
parent = __clk_get_parent(clk->hw.clk);
clks = _get_clksel_by_parent(clk, parent);
if (!clks)
return ~0;
@ -234,7 +181,8 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div)
if (!clkr->div) {
pr_err("clock: %s: could not find divisor %d for parent %s\n",
__clk_get_name(clk), div, __clk_get_name(parent));
__clk_get_name(clk->hw.clk), div,
__clk_get_name(parent));
return ~0;
}
@ -249,7 +197,7 @@ static u32 _divisor_to_clksel(struct clk *clk, u32 div)
* into the hardware, convert it into the actual divisor value, and
* return it; or return 0 on error.
*/
static u32 _read_divisor(struct clk *clk)
static u32 _read_divisor(struct clk_hw_omap *clk)
{
u32 v;
@ -277,7 +225,8 @@ static u32 _read_divisor(struct clk *clk)
*
* Returns the rounded clock rate or returns 0xffffffff on error.
*/
u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk,
unsigned long target_rate,
u32 *new_div)
{
unsigned long test_rate;
@ -288,9 +237,9 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
unsigned long parent_rate;
const char *clk_name;
parent = __clk_get_parent(clk);
parent = __clk_get_parent(clk->hw.clk);
clk_name = __clk_get_name(clk->hw.clk);
parent_rate = __clk_get_rate(parent);
clk_name = __clk_get_name(clk);
if (!clk->clksel || !clk->clksel_mask)
return ~0;
@ -341,27 +290,35 @@ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
*/
/**
* omap2_init_clksel_parent() - set a clksel clk's parent field from the hdwr
* @clk: OMAP clock struct ptr to use
* omap2_clksel_find_parent_index() - return the array index of the current
* hardware parent of @hw
* @hw: struct clk_hw * to find the current hardware parent of
*
* Given a pointer @clk to a source-selectable struct clk, read the
* hardware register and determine what its parent is currently set
* to. Update @clk's .parent field with the appropriate clk ptr. No
* return value.
* Given a struct clk_hw pointer @hw to the 'hw' member of a struct
* clk_hw_omap record representing a source-selectable hardware clock,
* read the hardware register and determine what its parent is
* currently set to. Intended to be called only by the common clock
* framework struct clk_hw_ops.get_parent function pointer. Return
* the array index of this parent clock upon success -- there is no
* way to return an error, so if we encounter an error, just WARN()
* and pretend that we know that we're doing.
*/
void omap2_init_clksel_parent(struct clk *clk)
u8 omap2_clksel_find_parent_index(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
const struct clksel *clks;
const struct clksel_rate *clkr;
u32 r, found = 0;
struct clk *parent;
const char *clk_name;
int ret = 0, f = 0;
if (!clk->clksel || !clk->clksel_mask)
return;
parent = __clk_get_parent(hw->clk);
clk_name = __clk_get_name(hw->clk);
parent = __clk_get_parent(clk);
clk_name = __clk_get_name(clk);
/* XXX should be able to return an error */
WARN((!clk->clksel || !clk->clksel_mask),
"clock: %s: attempt to call on a non-clksel clock", clk_name);
r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
r >>= __ffs(clk->clksel_mask);
@ -372,27 +329,21 @@ void omap2_init_clksel_parent(struct clk *clk)
continue;
if (clkr->val == r) {
if (parent != clks->parent) {
pr_debug("clock: %s: inited parent to %s (was %s)\n",
clk_name,
__clk_get_name(clks->parent),
((parent) ?
__clk_get_name(parent) :
"NULL"));
clk_reparent(clk, clks->parent);
}
found = 1;
ret = f;
}
}
f++;
}
/* This indicates a data error */
WARN(!found, "clock: %s: init parent: could not find regval %0x\n",
clk_name, r);
return;
return ret;
}
/**
* omap2_clksel_recalc() - function ptr to pass via struct clk .recalc field
* @clk: struct clk *
@ -402,21 +353,23 @@ void omap2_init_clksel_parent(struct clk *clk)
* function. Returns the clock's current rate, based on its parent's rate
* and its current divisor setting in the hardware.
*/
unsigned long omap2_clksel_recalc(struct clk *clk)
unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate)
{
unsigned long rate;
u32 div = 0;
struct clk *parent;
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
if (!parent_rate)
return 0;
div = _read_divisor(clk);
if (div == 0)
return __clk_get_rate(clk);
if (!div)
rate = parent_rate;
else
rate = parent_rate / div;
parent = __clk_get_parent(clk);
rate = __clk_get_rate(parent) / div;
pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n",
__clk_get_name(clk), rate, div);
pr_debug("%s: recalc'd %s's rate to %lu (div %d)\n", __func__,
__clk_get_name(hw->clk), rate, div);
return rate;
}
@ -432,8 +385,10 @@ unsigned long omap2_clksel_recalc(struct clk *clk)
*
* Returns the rounded clock rate or returns 0xffffffff on error.
*/
long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate,
unsigned long *parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 new_div;
return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
@ -454,8 +409,10 @@ long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
* is changed, they will all be affected without any notification.
* Returns -EINVAL upon error, or 0 upon success.
*/
int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 field_val, validrate, new_div = 0;
if (!clk->clksel || !clk->clksel_mask)
@ -471,10 +428,8 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
_write_clksel_reg(clk, field_val);
clk->rate = __clk_get_rate(__clk_get_parent(clk)) / new_div;
pr_debug("clock: %s: set rate to %ld\n", __clk_get_name(clk),
__clk_get_rate(clk));
pr_debug("clock: %s: set rate to %ld\n", __clk_get_name(hw->clk),
__clk_get_rate(hw->clk));
return 0;
}
@ -499,32 +454,13 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
* affected without any notification. Returns -EINVAL upon error, or
* 0 upon success.
*/
int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent)
int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val)
{
u32 field_val = 0;
u32 parent_div;
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
if (!clk->clksel || !clk->clksel_mask)
return -EINVAL;
parent_div = _get_div_and_fieldval(new_parent, clk, &field_val);
if (!parent_div)
return -EINVAL;
_write_clksel_reg(clk, field_val);
clk_reparent(clk, new_parent);
/* CLKSEL clocks follow their parents' rates, divided by a divisor */
clk->rate = __clk_get_rate(new_parent);
if (parent_div > 0)
__clk_get_rate(clk) /= parent_div;
pr_debug("clock: %s: set parent to %s (new rate %ld)\n",
__clk_get_name(clk),
__clk_get_name(__clk_get_parent(clk)),
__clk_get_rate(clk));
return 0;
}

View File

@ -16,7 +16,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <asm/div64.h>
@ -76,7 +76,7 @@
* (assuming that it is counting N upwards), or -2 if the enclosing loop
* should skip to the next iteration (again assuming N is increasing).
*/
static int _dpll_test_fint(struct clk *clk, u8 n)
static int _dpll_test_fint(struct clk_hw_omap *clk, u8 n)
{
struct dpll_data *dd;
long fint, fint_min, fint_max;
@ -85,7 +85,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
dd = clk->dpll_data;
/* DPLL divider must result in a valid jitter correction val */
fint = __clk_get_rate(__clk_get_parent(clk)) / n;
fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
if (cpu_is_omap24xx()) {
/* Should not be called for OMAP2, so warn if it is called */
@ -186,15 +186,15 @@ static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
}
/* Public functions */
void omap2_init_dpll_parent(struct clk *clk)
u8 omap2_init_dpll_parent(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 v;
struct dpll_data *dd;
dd = clk->dpll_data;
if (!dd)
return;
return -EINVAL;
v = __raw_readl(dd->control_reg);
v &= dd->enable_mask;
@ -204,18 +204,18 @@ void omap2_init_dpll_parent(struct clk *clk)
if (cpu_is_omap24xx()) {
if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
v == OMAP2XXX_EN_DPLL_FRBYPASS)
clk_reparent(clk, dd->clk_bypass);
return 1;
} else if (cpu_is_omap34xx()) {
if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
v == OMAP3XXX_EN_DPLL_FRBYPASS)
clk_reparent(clk, dd->clk_bypass);
return 1;
} else if (soc_is_am33xx() || cpu_is_omap44xx()) {
if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
v == OMAP4XXX_EN_DPLL_FRBYPASS ||
v == OMAP4XXX_EN_DPLL_MNBYPASS)
clk_reparent(clk, dd->clk_bypass);
return 1;
}
return;
return 0;
}
/**
@ -232,7 +232,7 @@ void omap2_init_dpll_parent(struct clk *clk)
* locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
* if the clock @clk is not a DPLL.
*/
u32 omap2_get_dpll_rate(struct clk *clk)
unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
{
long long dpll_clk;
u32 dpll_mult, dpll_div, v;
@ -288,8 +288,10 @@ u32 omap2_get_dpll_rate(struct clk *clk)
* (expensive) function again. Returns ~0 if the target rate cannot
* be rounded, or the rounded rate upon success.
*/
long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
unsigned long *parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
int m, n, r, scaled_max_m;
unsigned long scaled_rt_rp;
unsigned long new_rate = 0;
@ -303,7 +305,7 @@ long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate)
dd = clk->dpll_data;
ref_rate = __clk_get_rate(dd->clk_ref);
clk_name = __clk_get_name(clk);
clk_name = __clk_get_name(hw->clk);
pr_debug("clock: %s: starting DPLL round_rate, target rate %ld\n",
clk_name, target_rate);

View File

@ -11,7 +11,7 @@
#undef DEBUG
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
@ -23,7 +23,7 @@
/* Private functions */
/* XXX */
void omap2_clkt_iclk_allow_idle(struct clk *clk)
void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
{
u32 v, r;
@ -35,7 +35,7 @@ void omap2_clkt_iclk_allow_idle(struct clk *clk)
}
/* XXX */
void omap2_clkt_iclk_deny_idle(struct clk *clk)
void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
{
u32 v, r;
@ -48,33 +48,17 @@ void omap2_clkt_iclk_deny_idle(struct clk *clk)
/* Public data */
const struct clkops clkops_omap2_iclk_dflt_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_companion = omap2_clk_dflt_find_companion,
const struct clk_hw_omap_ops clkhwops_iclk = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
};
const struct clk_hw_omap_ops clkhwops_iclk_wait = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
.find_idlest = omap2_clk_dflt_find_idlest,
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
};
const struct clkops clkops_omap2_iclk_dflt = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
};
const struct clkops clkops_omap2_iclk_idle_only = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
};
const struct clkops clkops_omap2_mdmclk_dflt_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_companion = omap2_clk_dflt_find_companion,
.find_idlest = omap2_clk_dflt_find_idlest,
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
};

File diff suppressed because it is too large Load Diff

View File

@ -20,6 +20,7 @@
#include <linux/list.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
struct omap_clk {
u16 cpu;
@ -52,43 +53,84 @@ struct omap_clk {
#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS)
#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX)
struct module;
struct clk;
struct clockdomain;
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
/* Temporary, needed during the common clock framework conversion */
#define __clk_get_name(clk) (clk->name)
#define __clk_get_parent(clk) (clk->parent)
#define __clk_get_rate(clk) (clk->rate)
#define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name) \
static struct clk _name = { \
.name = #_name, \
.hw = &_name##_hw.hw, \
.parent_names = _parent_array_name, \
.num_parents = ARRAY_SIZE(_parent_array_name), \
.ops = &_clkops_name, \
};
/**
* struct clkops - some clock function pointers
* @enable: fn ptr that enables the current clock in hardware
* @disable: fn ptr that enables the current clock in hardware
* @find_idlest: function returning the IDLEST register for the clock's IP blk
* @find_companion: function returning the "companion" clk reg for the clock
* @allow_idle: fn ptr that enables autoidle for the current clock in hardware
* @deny_idle: fn ptr that disables autoidle for the current clock in hardware
*
* A "companion" clk is an accompanying clock to the one being queried
* that must be enabled for the IP module connected to the clock to
* become accessible by the hardware. Neither @find_idlest nor
* @find_companion should be needed; that information is IP
* block-specific; the hwmod code has been created to handle this, but
* until hwmod data is ready and drivers have been converted to use PM
* runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
* @find_companion must, unfortunately, remain.
*/
struct clkops {
int (*enable)(struct clk *);
void (*disable)(struct clk *);
void (*find_idlest)(struct clk *, void __iomem **,
u8 *, u8 *);
void (*find_companion)(struct clk *, void __iomem **,
u8 *);
void (*allow_idle)(struct clk *);
void (*deny_idle)(struct clk *);
};
#define DEFINE_STRUCT_CLK_HW_OMAP(_name, _clkdm_name) \
static struct clk_hw_omap _name##_hw = { \
.hw = { \
.clk = &_name, \
}, \
.clkdm_name = _clkdm_name, \
};
#define DEFINE_CLK_OMAP_MUX(_name, _clkdm_name, _clksel, \
_clksel_reg, _clksel_mask, \
_parent_names, _ops) \
static struct clk _name; \
static struct clk_hw_omap _name##_hw = { \
.hw = { \
.clk = &_name, \
}, \
.clksel = _clksel, \
.clksel_reg = _clksel_reg, \
.clksel_mask = _clksel_mask, \
.clkdm_name = _clkdm_name, \
}; \
DEFINE_STRUCT_CLK(_name, _parent_names, _ops);
#define DEFINE_CLK_OMAP_MUX_GATE(_name, _clkdm_name, _clksel, \
_clksel_reg, _clksel_mask, \
_enable_reg, _enable_bit, \
_hwops, _parent_names, _ops) \
static struct clk _name; \
static struct clk_hw_omap _name##_hw = { \
.hw = { \
.clk = &_name, \
}, \
.ops = _hwops, \
.enable_reg = _enable_reg, \
.enable_bit = _enable_bit, \
.clksel = _clksel, \
.clksel_reg = _clksel_reg, \
.clksel_mask = _clksel_mask, \
.clkdm_name = _clkdm_name, \
}; \
DEFINE_STRUCT_CLK(_name, _parent_names, _ops);
#define DEFINE_CLK_OMAP_HSDIVIDER(_name, _parent_name, \
_parent_ptr, _flags, \
_clksel_reg, _clksel_mask) \
static const struct clksel _name##_div[] = { \
{ \
.parent = _parent_ptr, \
.rates = div31_1to31_rates \
}, \
{ .parent = NULL }, \
}; \
static struct clk _name; \
static const char *_name##_parent_names[] = { \
_parent_name, \
}; \
static struct clk_hw_omap _name##_hw = { \
.hw = { \
.clk = &_name, \
}, \
.clksel = _name##_div, \
.clksel_reg = _clksel_reg, \
.clksel_mask = _clksel_mask, \
.ops = &clkhwops_omap4_dpllmx, \
}; \
DEFINE_STRUCT_CLK(_name, _name##_parent_names, omap_hsdivider_ops);
/* struct clksel_rate.flags possibilities */
#define RATE_IN_242X (1 << 0)
@ -229,22 +271,10 @@ struct dpll_data {
#define CLOCK_CLKOUTX2 (1 << 5)
/**
* struct clk - OMAP struct clk
* struct clk_hw_omap - OMAP struct clk
* @node: list_head connecting this clock into the full clock list
* @ops: struct clkops * for this clock
* @name: the name of the clock in the hardware (used in hwmod data and debug)
* @parent: pointer to this clock's parent struct clk
* @children: list_head connecting to the child clks' @sibling list_heads
* @sibling: list_head connecting this clk to its parent clk's @children
* @rate: current clock rate
* @enable_reg: register to write to enable the clock (see @enable_bit)
* @recalc: fn ptr that returns the clock's current rate
* @set_rate: fn ptr that can change the clock's current rate
* @round_rate: fn ptr that can round the clock's current rate
* @init: fn ptr to do clock-specific initialization
* @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
* @usecount: number of users that have requested this clock to be enabled
* @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
* @flags: see "struct clk.flags possibilities" above
* @clksel_reg: for clksel clks, register va containing src/divisor select
* @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
@ -258,39 +288,17 @@ struct dpll_data {
* XXX @rate_offset, @src_offset should probably be removed and OMAP1
* clock code converted to use clksel.
*
* XXX @usecount is poorly named. It should be "enable_count" or
* something similar. "users" in the description refers to kernel
* code (core code or drivers) that have called clk_enable() and not
* yet called clk_disable(); the usecount of parent clocks is also
* incremented by the clock code when clk_enable() is called on child
* clocks and decremented by the clock code when clk_disable() is
* called on child clocks.
*
* XXX @clkdm, @usecount, @children, @sibling should be marked for
* internal use only.
*
* @children and @sibling are used to optimize parent-to-child clock
* tree traversals. (child-to-parent traversals use @parent.)
*
* XXX The notion of the clock's current rate probably needs to be
* separated from the clock's target rate.
*/
struct clk {
struct clk_hw_omap_ops;
struct clk_hw_omap {
struct clk_hw hw;
struct list_head node;
const struct clkops *ops;
const char *name;
struct clk *parent;
struct list_head children;
struct list_head sibling; /* node for children */
unsigned long rate;
void __iomem *enable_reg;
unsigned long (*recalc)(struct clk *);
int (*set_rate)(struct clk *, unsigned long);
long (*round_rate)(struct clk *, unsigned long);
void (*init)(struct clk *);
u8 enable_bit;
s8 usecount;
unsigned long fixed_rate;
u8 fixed_div;
void __iomem *enable_reg;
u8 enable_bit;
u8 flags;
void __iomem *clksel_reg;
u32 clksel_mask;
@ -298,42 +306,22 @@ struct clk {
struct dpll_data *dpll_data;
const char *clkdm_name;
struct clockdomain *clkdm;
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
struct dentry *dent; /* For visible tree hierarchy */
#endif
const struct clk_hw_omap_ops *ops;
};
struct clk_functions {
int (*clk_enable)(struct clk *clk);
void (*clk_disable)(struct clk *clk);
long (*clk_round_rate)(struct clk *clk, unsigned long rate);
int (*clk_set_rate)(struct clk *clk, unsigned long rate);
int (*clk_set_parent)(struct clk *clk, struct clk *parent);
void (*clk_allow_idle)(struct clk *clk);
void (*clk_deny_idle)(struct clk *clk);
void (*clk_disable_unused)(struct clk *clk);
struct clk_hw_omap_ops {
void (*find_idlest)(struct clk_hw_omap *oclk,
void __iomem **idlest_reg,
u8 *idlest_bit, u8 *idlest_val);
void (*find_companion)(struct clk_hw_omap *oclk,
void __iomem **other_reg,
u8 *other_bit);
void (*allow_idle)(struct clk_hw_omap *oclk);
void (*deny_idle)(struct clk_hw_omap *oclk);
};
extern int mpurate;
extern int clk_init(struct clk_functions *custom_clocks);
extern void clk_preinit(struct clk *clk);
extern int clk_register(struct clk *clk);
extern void clk_reparent(struct clk *child, struct clk *parent);
extern void clk_unregister(struct clk *clk);
extern void propagate_rate(struct clk *clk);
extern void recalculate_root_clocks(void);
extern unsigned long followparent_recalc(struct clk *clk);
extern void clk_enable_init_clocks(void);
unsigned long omap_fixed_divisor_recalc(struct clk *clk);
extern struct clk *omap_clk_get_by_name(const char *name);
extern int omap_clk_enable_autoidle_all(void);
extern int omap_clk_disable_autoidle_all(void);
extern const struct clkops clkops_null;
extern struct clk dummy_ck;
unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw,
unsigned long parent_rate);
/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
#define CORE_CLK_SRC_32K 0x0
@ -364,57 +352,62 @@ extern struct clk dummy_ck;
/* DPLL Type and DCO Selection Flags */
#define DPLL_J_TYPE 0x1
int omap2_clk_enable(struct clk *clk);
void omap2_clk_disable(struct clk *clk);
long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
unsigned long omap3_dpll_recalc(struct clk *clk);
unsigned long omap3_clkoutx2_recalc(struct clk *clk);
void omap3_dpll_allow_idle(struct clk *clk);
void omap3_dpll_deny_idle(struct clk *clk);
u32 omap3_dpll_autoidle_read(struct clk *clk);
int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
int omap3_noncore_dpll_enable(struct clk *clk);
void omap3_noncore_dpll_disable(struct clk *clk);
int omap4_dpllmx_gatectrl_read(struct clk *clk);
void omap4_dpllmx_allow_gatectrl(struct clk *clk);
void omap4_dpllmx_deny_gatectrl(struct clk *clk);
long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate);
unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk);
long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
unsigned long *parent_rate);
unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
int omap3_noncore_dpll_enable(struct clk_hw *hw);
void omap3_noncore_dpll_disable(struct clk_hw *hw);
int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate);
u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
unsigned long parent_rate);
int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk);
void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk);
void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk);
unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
unsigned long parent_rate);
long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
unsigned long target_rate,
unsigned long *parent_rate);
#ifdef CONFIG_OMAP_RESET_CLOCKS
void omap2_clk_disable_unused(struct clk *clk);
#else
#define omap2_clk_disable_unused NULL
#endif
void omap2_init_clk_clkdm(struct clk *clk);
void omap2_init_clk_clkdm(struct clk_hw *clk);
void __init omap2_clk_disable_clkdm_control(void);
/* clkt_clksel.c public functions */
u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk,
unsigned long target_rate,
u32 *new_div);
void omap2_init_clksel_parent(struct clk *clk);
unsigned long omap2_clksel_recalc(struct clk *clk);
long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent);
u8 omap2_clksel_find_parent_index(struct clk_hw *hw);
unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate);
long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate,
unsigned long *parent_rate);
int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate);
int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
/* clkt_iclk.c public functions */
extern void omap2_clkt_iclk_allow_idle(struct clk *clk);
extern void omap2_clkt_iclk_deny_idle(struct clk *clk);
extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
u32 omap2_get_dpll_rate(struct clk *clk);
void omap2_init_dpll_parent(struct clk *clk);
u8 omap2_init_dpll_parent(struct clk_hw *hw);
unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
int omap2_dflt_clk_enable(struct clk *clk);
void omap2_dflt_clk_disable(struct clk *clk);
void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
void __iomem **other_reg,
u8 *other_bit);
void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
void __iomem **idlest_reg,
u8 *idlest_bit, u8 *idlest_val);
void omap2_init_clk_hw_omap_clocks(struct clk *clk);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_disable_autoidle_all(void);
void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
const char *core_ck_name,
@ -432,28 +425,38 @@ extern const struct clksel_rate gpt_32k_rates[];
extern const struct clksel_rate gpt_sys_rates[];
extern const struct clksel_rate gfx_l3_rates[];
extern const struct clksel_rate dsp_ick_rates[];
extern struct clk dummy_ck;
extern const struct clkops clkops_omap2_iclk_dflt_wait;
extern const struct clkops clkops_omap2_iclk_dflt;
extern const struct clkops clkops_omap2_iclk_idle_only;
extern const struct clkops clkops_omap2_mdmclk_dflt_wait;
extern const struct clkops clkops_omap2xxx_dpll_ops;
extern const struct clkops clkops_omap3_noncore_dpll_ops;
extern const struct clkops clkops_omap3_core_dpll_ops;
extern const struct clkops clkops_omap4_dpllmx_ops;
extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
extern const struct clk_hw_omap_ops clkhwops_apll54;
extern const struct clk_hw_omap_ops clkhwops_apll96;
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
/* clksel_rate blocks shared between OMAP44xx and AM33xx */
extern const struct clksel_rate div_1_0_rates[];
extern const struct clksel_rate div3_1to4_rates[];
extern const struct clksel_rate div_1_1_rates[];
extern const struct clksel_rate div_1_2_rates[];
extern const struct clksel_rate div_1_3_rates[];
extern const struct clksel_rate div_1_4_rates[];
extern const struct clksel_rate div31_1to31_rates[];
/* clocks shared between various OMAP SoCs */
extern struct clk virt_19200000_ck;
extern struct clk virt_26000000_ck;
extern int am33xx_clk_init(void);
extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
#endif

File diff suppressed because it is too large Load Diff

View File

@ -40,7 +40,7 @@
* passes back the correct CM_IDLEST register address for I2CHS
* modules. No return value.
*/
static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
static void omap2430_clk_i2chs_find_idlest(struct clk_hw_omap *clk,
void __iomem **idlest_reg,
u8 *idlest_bit,
u8 *idlest_val)
@ -51,9 +51,7 @@ static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
}
/* 2430 I2CHS has non-standard IDLEST register */
const struct clkops clkops_omap2430_i2chs_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait = {
.find_idlest = omap2430_clk_i2chs_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
.find_companion = omap2_clk_dflt_find_companion,
};

File diff suppressed because it is too large Load Diff

View File

@ -28,6 +28,7 @@
#include "cm.h"
#include "cm-regbits-24xx.h"
struct clk_hw *dclk_hw;
/*
* Omap24xx specific clock functions
*/

View File

@ -8,18 +8,32 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK2XXX_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK2XXX_H
unsigned long omap2_table_mpu_recalc(struct clk *clk);
int omap2_select_table_rate(struct clk *clk, unsigned long rate);
long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
unsigned long omap2xxx_sys_clk_recalc(struct clk *clk);
unsigned long omap2_osc_clk_recalc(struct clk *clk);
unsigned long omap2_dpllcore_recalc(struct clk *clk);
int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
#include <linux/clk-provider.h>
#include "clock.h"
unsigned long omap2_table_mpu_recalc(struct clk_hw *clk,
unsigned long parent_rate);
int omap2_select_table_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate);
long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate);
unsigned long omap2xxx_sys_clk_recalc(struct clk_hw *clk,
unsigned long parent_rate);
unsigned long omap2_osc_clk_recalc(struct clk_hw *clk,
unsigned long parent_rate);
unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
unsigned long parent_rate);
int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
unsigned long parent_rate);
void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
unsigned long omap2_clk_apll54_recalc(struct clk_hw *hw,
unsigned long parent_rate);
unsigned long omap2_clk_apll96_recalc(struct clk_hw *hw,
unsigned long parent_rate);
unsigned long omap2xxx_clk_get_core_rate(void);
u32 omap2xxx_get_apll_clkin(void);
u32 omap2xxx_get_sysclkdiv(void);
void omap2xxx_clk_prepare_for_reboot(void);
void omap2xxx_clkt_dpllcore_init(struct clk *clk);
void omap2xxx_clkt_vps_check_bootloader_rates(void);
void omap2xxx_clkt_vps_late_init(void);
@ -37,9 +51,12 @@ int omap2430_clk_init(void);
extern void __iomem *prcm_clksrc_ctrl;
extern const struct clkops clkops_omap2430_i2chs_wait;
extern const struct clkops clkops_oscck;
extern const struct clkops clkops_apll96;
extern const struct clkops clkops_apll54;
extern struct clk_hw *dclk_hw;
int omap2_enable_osc_ck(struct clk_hw *hw);
void omap2_disable_osc_ck(struct clk_hw *hw);
int omap2_clk_apll96_enable(struct clk_hw *hw);
int omap2_clk_apll54_enable(struct clk_hw *hw);
void omap2_clk_apll96_disable(struct clk_hw *hw);
void omap2_clk_apll54_disable(struct clk_hw *hw);
#endif

File diff suppressed because it is too large Load Diff

View File

@ -37,7 +37,7 @@
* from the CM_{I,F}CLKEN bit. Pass back the correct info via
* @idlest_reg and @idlest_bit. No return value.
*/
static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk,
void __iomem **idlest_reg,
u8 *idlest_bit,
u8 *idlest_val)
@ -49,21 +49,16 @@ static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
*idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clkops clkops_omap3430es2_ssi_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait = {
.find_idlest = omap3430es2_clk_ssi_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
.find_companion = omap2_clk_dflt_find_companion,
};
const struct clkops clkops_omap3430es2_iclk_ssi_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_idlest = omap3430es2_clk_ssi_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
.find_idlest = omap3430es2_clk_ssi_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
/**
@ -80,7 +75,7 @@ const struct clkops clkops_omap3430es2_iclk_ssi_wait = {
* default find_idlest code assumes that they are at the same
* position.) No return value.
*/
static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk,
void __iomem **idlest_reg,
u8 *idlest_bit,
u8 *idlest_val)
@ -94,20 +89,16 @@ static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
*idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = {
.find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
.find_companion = omap2_clk_dflt_find_companion,
};
const struct clkops clkops_omap3430es2_iclk_dss_usbhost_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
.find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
/**
@ -121,7 +112,7 @@ const struct clkops clkops_omap3430es2_iclk_dss_usbhost_wait = {
* shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
* @idlest_reg and @idlest_bit. No return value.
*/
static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
static void omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk,
void __iomem **idlest_reg,
u8 *idlest_bit,
u8 *idlest_val)
@ -134,18 +125,14 @@ static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
*idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clkops clkops_omap3430es2_hsotgusb_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
const struct clkops clkops_omap3430es2_iclk_hsotgusb_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
.find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait = {
.find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};

View File

@ -47,7 +47,7 @@
* in the enable register itsel at a bit offset of 4 from the enable
* bit. A value of 1 indicates that clock is enabled.
*/
static void am35xx_clk_find_idlest(struct clk *clk,
static void am35xx_clk_find_idlest(struct clk_hw_omap *clk,
void __iomem **idlest_reg,
u8 *idlest_bit,
u8 *idlest_val)
@ -71,8 +71,9 @@ static void am35xx_clk_find_idlest(struct clk *clk,
* associate this type of code with per-module data structures to
* avoid this issue, and remove the casts. No return value.
*/
static void am35xx_clk_find_companion(struct clk *clk, void __iomem **other_reg,
u8 *other_bit)
static void am35xx_clk_find_companion(struct clk_hw_omap *clk,
void __iomem **other_reg,
u8 *other_bit)
{
*other_reg = (__force void __iomem *)(clk->enable_reg);
if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
@ -80,10 +81,7 @@ static void am35xx_clk_find_companion(struct clk *clk, void __iomem **other_reg,
else
*other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
}
const struct clkops clkops_am35xx_ipss_module_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = {
.find_idlest = am35xx_clk_find_idlest,
.find_companion = am35xx_clk_find_companion,
};
@ -99,7 +97,7 @@ const struct clkops clkops_am35xx_ipss_module_wait = {
* CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
* and @idlest_bit. No return value.
*/
static void am35xx_clk_ipss_find_idlest(struct clk *clk,
static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk,
void __iomem **idlest_reg,
u8 *idlest_bit,
u8 *idlest_val)
@ -112,13 +110,9 @@ static void am35xx_clk_ipss_find_idlest(struct clk *clk,
*idlest_val = OMAP34XX_CM_IDLEST_VAL;
}
const struct clkops clkops_am35xx_ipss_wait = {
.enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
.find_idlest = am35xx_clk_ipss_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = {
.allow_idle = omap2_clkt_iclk_allow_idle,
.deny_idle = omap2_clkt_iclk_deny_idle,
.find_idlest = am35xx_clk_ipss_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};

View File

@ -37,34 +37,32 @@
* (Any other value different from the Read value) to the
* corresponding CM_CLKSEL register will refresh the dividers.
*/
static int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk *clk)
int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
{
struct clk_hw_omap *parent;
struct clk_hw *parent_hw;
u32 dummy_v, orig_v, clksel_shift;
int ret;
/* Clear PWRDN bit of HSDIVIDER */
ret = omap2_dflt_clk_enable(clk);
parent_hw = __clk_get_hw(__clk_get_parent(clk->clk));
parent = to_clk_hw_omap(parent_hw);
/* Restore the dividers */
if (!ret) {
clksel_shift = __ffs(clk->parent->clksel_mask);
orig_v = __raw_readl(clk->parent->clksel_reg);
clksel_shift = __ffs(parent->clksel_mask);
orig_v = __raw_readl(parent->clksel_reg);
dummy_v = orig_v;
/* Write any other value different from the Read value */
dummy_v ^= (1 << clksel_shift);
__raw_writel(dummy_v, clk->parent->clksel_reg);
__raw_writel(dummy_v, parent->clksel_reg);
/* Write the original divider */
__raw_writel(orig_v, clk->parent->clksel_reg);
__raw_writel(orig_v, parent->clksel_reg);
}
return ret;
}
const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore = {
.enable = omap36xx_pwrdn_clk_enable_with_hsdiv_restore,
.disable = omap2_dflt_clk_disable,
.find_companion = omap2_clk_dflt_find_companion,
.find_idlest = omap2_clk_dflt_find_idlest,
};

View File

@ -8,6 +8,6 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
extern const struct clkops clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
extern int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *hw);
#endif

View File

@ -38,8 +38,8 @@
/* needed by omap3_core_dpll_m2_set_rate() */
struct clk *sdrc_ick_p, *arm_fck_p;
int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
/*
* According to the 12-5 CDP code from TI, "Limitation 2.5"
@ -51,7 +51,7 @@ int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
return -EINVAL;
}
return omap3_noncore_dpll_set_rate(clk, rate);
return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
}
void __init omap3_clk_lock_dpll5(void)

View File

@ -9,8 +9,10 @@
#define __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H
int omap3xxx_clk_init(void);
int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
unsigned long parent_rate);
int omap3_core_dpll_m2_set_rate(struct clk_hw *clk, unsigned long rate,
unsigned long parent_rate);
void omap3_clk_lock_dpll5(void);
extern struct clk *sdrc_ick_p;

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

View File

@ -16,6 +16,7 @@
* OMAP3xxx clock definition files.
*/
#include <linux/clk-private.h>
#include "clock.h"
/* clksel_rate data common to 24xx/343x */
@ -52,6 +53,13 @@ const struct clksel_rate div_1_0_rates[] = {
{ .div = 0 },
};
const struct clksel_rate div3_1to4_rates[] = {
{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
{ .div = 4, .val = 2, .flags = RATE_IN_4430 },
{ .div = 0 },
};
const struct clksel_rate div_1_1_rates[] = {
{ .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
{ .div = 0 },
@ -109,14 +117,10 @@ const struct clksel_rate div31_1to31_rates[] = {
/* Clocks shared between various OMAP SoCs */
struct clk virt_19200000_ck = {
.name = "virt_19200000_ck",
.ops = &clkops_null,
.rate = 19200000,
};
static struct clk_ops dummy_ck_ops = {};
struct clk virt_26000000_ck = {
.name = "virt_26000000_ck",
.ops = &clkops_null,
.rate = 26000000,
struct clk dummy_ck = {
.name = "dummy_clk",
.ops = &dummy_ck_ops,
.flags = CLK_IS_BASIC,
};

View File

@ -22,6 +22,7 @@
#include <linux/clk.h>
#include <linux/limits.h>
#include <linux/err.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
@ -947,35 +948,6 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
return 0;
}
static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm)
{
unsigned long flags;
if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
return -EINVAL;
spin_lock_irqsave(&clkdm->lock, flags);
if (atomic_read(&clkdm->usecount) == 0) {
spin_unlock_irqrestore(&clkdm->lock, flags);
WARN_ON(1); /* underflow */
return -ERANGE;
}
if (atomic_dec_return(&clkdm->usecount) > 0) {
spin_unlock_irqrestore(&clkdm->lock, flags);
return 0;
}
arch_clkdm->clkdm_clk_disable(clkdm);
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
pr_debug("clockdomain: %s: disabled\n", clkdm->name);
return 0;
}
/**
* clkdm_clk_enable - add an enabled downstream clock to this clkdm
* @clkdm: struct clockdomain *
@ -1018,15 +990,37 @@ int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
*/
int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
{
/*
* XXX Rewrite this code to maintain a list of enabled
* downstream clocks for debugging purposes?
*/
unsigned long flags;
if (!clk)
if (!clkdm || !clk || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
return -EINVAL;
return _clkdm_clk_hwmod_disable(clkdm);
spin_lock_irqsave(&clkdm->lock, flags);
/* corner case: disabling unused clocks */
if (__clk_get_enable_count(clk) == 0)
goto ccd_exit;
if (atomic_read(&clkdm->usecount) == 0) {
spin_unlock_irqrestore(&clkdm->lock, flags);
WARN_ON(1); /* underflow */
return -ERANGE;
}
if (atomic_dec_return(&clkdm->usecount) > 0) {
spin_unlock_irqrestore(&clkdm->lock, flags);
return 0;
}
arch_clkdm->clkdm_clk_disable(clkdm);
pwrdm_state_switch(clkdm->pwrdm.ptr);
pr_debug("clockdomain: %s: disabled\n", clkdm->name);
ccd_exit:
spin_unlock_irqrestore(&clkdm->lock, flags);
return 0;
}
/**
@ -1077,6 +1071,8 @@ int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh)
*/
int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh)
{
unsigned long flags;
/* The clkdm attribute does not exist yet prior OMAP4 */
if (cpu_is_omap24xx() || cpu_is_omap34xx())
return 0;
@ -1086,9 +1082,28 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh)
* downstream hwmods for debugging purposes?
*/
if (!oh)
if (!clkdm || !oh || !arch_clkdm || !arch_clkdm->clkdm_clk_disable)
return -EINVAL;
return _clkdm_clk_hwmod_disable(clkdm);
spin_lock_irqsave(&clkdm->lock, flags);
if (atomic_read(&clkdm->usecount) == 0) {
spin_unlock_irqrestore(&clkdm->lock, flags);
WARN_ON(1); /* underflow */
return -ERANGE;
}
if (atomic_dec_return(&clkdm->usecount) > 0) {
spin_unlock_irqrestore(&clkdm->lock, flags);
return 0;
}
arch_clkdm->clkdm_clk_disable(clkdm);
pwrdm_state_switch(clkdm->pwrdm.ptr);
spin_unlock_irqrestore(&clkdm->lock, flags);
pr_debug("clockdomain: %s: disabled\n", clkdm->name);
return 0;
}

View File

@ -59,6 +59,7 @@
/* CM_CLKSEL_MPU */
#define OMAP24XX_CLKSEL_MPU_SHIFT 0
#define OMAP24XX_CLKSEL_MPU_MASK (0x1f << 0)
#define OMAP24XX_CLKSEL_MPU_WIDTH 5
/* CM_CLKSTCTRL_MPU */
#define OMAP24XX_AUTOSTATE_MPU_SHIFT 0
@ -237,8 +238,10 @@
#define OMAP24XX_CLKSEL_DSS1_MASK (0x1f << 8)
#define OMAP24XX_CLKSEL_L4_SHIFT 5
#define OMAP24XX_CLKSEL_L4_MASK (0x3 << 5)
#define OMAP24XX_CLKSEL_L4_WIDTH 2
#define OMAP24XX_CLKSEL_L3_SHIFT 0
#define OMAP24XX_CLKSEL_L3_MASK (0x1f << 0)
#define OMAP24XX_CLKSEL_L3_WIDTH 5
/* CM_CLKSEL2_CORE */
#define OMAP24XX_CLKSEL_GPT12_SHIFT 22
@ -363,8 +366,10 @@
#define OMAP24XX_DPLL_DIV_MASK (0xf << 8)
#define OMAP24XX_54M_SOURCE_SHIFT 5
#define OMAP24XX_54M_SOURCE_MASK (1 << 5)
#define OMAP24XX_54M_SOURCE_WIDTH 1
#define OMAP2430_96M_SOURCE_SHIFT 4
#define OMAP2430_96M_SOURCE_MASK (1 << 4)
#define OMAP2430_96M_SOURCE_WIDTH 1
#define OMAP24XX_48M_SOURCE_SHIFT 3
#define OMAP24XX_48M_SOURCE_MASK (1 << 3)
#define OMAP2430_ALTCLK_SOURCE_SHIFT 0

View File

@ -81,6 +81,7 @@
/* CM_CLKSEL1_PLL_IVA2 */
#define OMAP3430_IVA2_CLK_SRC_SHIFT 19
#define OMAP3430_IVA2_CLK_SRC_MASK (0x7 << 19)
#define OMAP3430_IVA2_CLK_SRC_WIDTH 3
#define OMAP3430_IVA2_DPLL_MULT_SHIFT 8
#define OMAP3430_IVA2_DPLL_MULT_MASK (0x7ff << 8)
#define OMAP3430_IVA2_DPLL_DIV_SHIFT 0
@ -89,6 +90,7 @@
/* CM_CLKSEL2_PLL_IVA2 */
#define OMAP3430_IVA2_DPLL_CLKOUT_DIV_SHIFT 0
#define OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK (0x1f << 0)
#define OMAP3430_IVA2_DPLL_CLKOUT_DIV_WIDTH 5
/* CM_CLKSTCTRL_IVA2 */
#define OMAP3430_CLKTRCTRL_IVA2_SHIFT 0
@ -118,6 +120,7 @@
/* CM_IDLEST_PLL_MPU */
#define OMAP3430_ST_MPU_CLK_SHIFT 0
#define OMAP3430_ST_MPU_CLK_MASK (1 << 0)
#define OMAP3430_ST_MPU_CLK_WIDTH 1
/* CM_AUTOIDLE_PLL_MPU */
#define OMAP3430_AUTO_MPU_DPLL_SHIFT 0
@ -126,6 +129,7 @@
/* CM_CLKSEL1_PLL_MPU */
#define OMAP3430_MPU_CLK_SRC_SHIFT 19
#define OMAP3430_MPU_CLK_SRC_MASK (0x7 << 19)
#define OMAP3430_MPU_CLK_SRC_WIDTH 3
#define OMAP3430_MPU_DPLL_MULT_SHIFT 8
#define OMAP3430_MPU_DPLL_MULT_MASK (0x7ff << 8)
#define OMAP3430_MPU_DPLL_DIV_SHIFT 0
@ -134,6 +138,7 @@
/* CM_CLKSEL2_PLL_MPU */
#define OMAP3430_MPU_DPLL_CLKOUT_DIV_SHIFT 0
#define OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK (0x1f << 0)
#define OMAP3430_MPU_DPLL_CLKOUT_DIV_WIDTH 5
/* CM_CLKSTCTRL_MPU */
#define OMAP3430_CLKTRCTRL_MPU_SHIFT 0
@ -345,10 +350,13 @@
#define OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK (0x3 << 4)
#define OMAP3430_CLKSEL_L4_SHIFT 2
#define OMAP3430_CLKSEL_L4_MASK (0x3 << 2)
#define OMAP3430_CLKSEL_L4_WIDTH 2
#define OMAP3430_CLKSEL_L3_SHIFT 0
#define OMAP3430_CLKSEL_L3_MASK (0x3 << 0)
#define OMAP3430_CLKSEL_L3_WIDTH 2
#define OMAP3630_CLKSEL_96M_SHIFT 12
#define OMAP3630_CLKSEL_96M_MASK (0x3 << 12)
#define OMAP3630_CLKSEL_96M_WIDTH 2
/* CM_CLKSTCTRL_CORE */
#define OMAP3430ES1_CLKTRCTRL_D2D_SHIFT 4
@ -452,6 +460,7 @@
#define OMAP3430ES2_CLKSEL_USIMOCP_MASK (0xf << 3)
#define OMAP3430_CLKSEL_RM_SHIFT 1
#define OMAP3430_CLKSEL_RM_MASK (0x3 << 1)
#define OMAP3430_CLKSEL_RM_WIDTH 2
#define OMAP3430_CLKSEL_GPT1_SHIFT 0
#define OMAP3430_CLKSEL_GPT1_MASK (1 << 0)
@ -520,14 +529,17 @@
/* Note that OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK was (0x3 << 27) on 3430ES1 */
#define OMAP3430_CORE_DPLL_CLKOUT_DIV_SHIFT 27
#define OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK (0x1f << 27)
#define OMAP3430_CORE_DPLL_CLKOUT_DIV_WIDTH 5
#define OMAP3430_CORE_DPLL_MULT_SHIFT 16
#define OMAP3430_CORE_DPLL_MULT_MASK (0x7ff << 16)
#define OMAP3430_CORE_DPLL_DIV_SHIFT 8
#define OMAP3430_CORE_DPLL_DIV_MASK (0x7f << 8)
#define OMAP3430_SOURCE_96M_SHIFT 6
#define OMAP3430_SOURCE_96M_MASK (1 << 6)
#define OMAP3430_SOURCE_96M_WIDTH 1
#define OMAP3430_SOURCE_54M_SHIFT 5
#define OMAP3430_SOURCE_54M_MASK (1 << 5)
#define OMAP3430_SOURCE_54M_WIDTH 1
#define OMAP3430_SOURCE_48M_SHIFT 3
#define OMAP3430_SOURCE_48M_MASK (1 << 3)
@ -545,7 +557,9 @@
/* CM_CLKSEL3_PLL */
#define OMAP3430_DIV_96M_SHIFT 0
#define OMAP3430_DIV_96M_MASK (0x1f << 0)
#define OMAP3430_DIV_96M_WIDTH 5
#define OMAP3630_DIV_96M_MASK (0x3f << 0)
#define OMAP3630_DIV_96M_WIDTH 6
/* CM_CLKSEL4_PLL */
#define OMAP3430ES2_PERIPH2_DPLL_MULT_SHIFT 8
@ -556,12 +570,14 @@
/* CM_CLKSEL5_PLL */
#define OMAP3430ES2_DIV_120M_SHIFT 0
#define OMAP3430ES2_DIV_120M_MASK (0x1f << 0)
#define OMAP3430ES2_DIV_120M_WIDTH 5
/* CM_CLKOUT_CTRL */
#define OMAP3430_CLKOUT2_EN_SHIFT 7
#define OMAP3430_CLKOUT2_EN_MASK (1 << 7)
#define OMAP3430_CLKOUT2_DIV_SHIFT 3
#define OMAP3430_CLKOUT2_DIV_MASK (0x7 << 3)
#define OMAP3430_CLKOUT2_DIV_WIDTH 3
#define OMAP3430_CLKOUT2SOURCE_SHIFT 0
#define OMAP3430_CLKOUT2SOURCE_MASK (0x3 << 0)
@ -592,10 +608,14 @@
/* CM_CLKSEL_DSS */
#define OMAP3430_CLKSEL_TV_SHIFT 8
#define OMAP3430_CLKSEL_TV_MASK (0x1f << 8)
#define OMAP3430_CLKSEL_TV_WIDTH 5
#define OMAP3630_CLKSEL_TV_MASK (0x3f << 8)
#define OMAP3630_CLKSEL_TV_WIDTH 6
#define OMAP3430_CLKSEL_DSS1_SHIFT 0
#define OMAP3430_CLKSEL_DSS1_MASK (0x1f << 0)
#define OMAP3430_CLKSEL_DSS1_WIDTH 5
#define OMAP3630_CLKSEL_DSS1_MASK (0x3f << 0)
#define OMAP3630_CLKSEL_DSS1_WIDTH 6
/* CM_SLEEPDEP_DSS specific bits */
@ -623,7 +643,9 @@
/* CM_CLKSEL_CAM */
#define OMAP3430_CLKSEL_CAM_SHIFT 0
#define OMAP3430_CLKSEL_CAM_MASK (0x1f << 0)
#define OMAP3430_CLKSEL_CAM_WIDTH 5
#define OMAP3630_CLKSEL_CAM_MASK (0x3f << 0)
#define OMAP3630_CLKSEL_CAM_WIDTH 6
/* CM_SLEEPDEP_CAM specific bits */
@ -721,21 +743,30 @@
/* CM_CLKSEL1_EMU */
#define OMAP3430_DIV_DPLL4_SHIFT 24
#define OMAP3430_DIV_DPLL4_MASK (0x1f << 24)
#define OMAP3430_DIV_DPLL4_WIDTH 5
#define OMAP3630_DIV_DPLL4_MASK (0x3f << 24)
#define OMAP3630_DIV_DPLL4_WIDTH 6
#define OMAP3430_DIV_DPLL3_SHIFT 16
#define OMAP3430_DIV_DPLL3_MASK (0x1f << 16)
#define OMAP3430_DIV_DPLL3_WIDTH 5
#define OMAP3430_CLKSEL_TRACECLK_SHIFT 11
#define OMAP3430_CLKSEL_TRACECLK_MASK (0x7 << 11)
#define OMAP3430_CLKSEL_TRACECLK_WIDTH 3
#define OMAP3430_CLKSEL_PCLK_SHIFT 8
#define OMAP3430_CLKSEL_PCLK_MASK (0x7 << 8)
#define OMAP3430_CLKSEL_PCLK_WIDTH 3
#define OMAP3430_CLKSEL_PCLKX2_SHIFT 6
#define OMAP3430_CLKSEL_PCLKX2_MASK (0x3 << 6)
#define OMAP3430_CLKSEL_PCLKX2_WIDTH 2
#define OMAP3430_CLKSEL_ATCLK_SHIFT 4
#define OMAP3430_CLKSEL_ATCLK_MASK (0x3 << 4)
#define OMAP3430_CLKSEL_ATCLK_WIDTH 2
#define OMAP3430_TRACE_MUX_CTRL_SHIFT 2
#define OMAP3430_TRACE_MUX_CTRL_MASK (0x3 << 2)
#define OMAP3430_TRACE_MUX_CTRL_WIDTH 2
#define OMAP3430_MUX_CTRL_SHIFT 0
#define OMAP3430_MUX_CTRL_MASK (0x3 << 0)
#define OMAP3430_MUX_CTRL_WIDTH 2
/* CM_CLKSTCTRL_EMU */
#define OMAP3430_CLKTRCTRL_EMU_SHIFT 0

View File

@ -108,6 +108,7 @@ extern void omap2xxx_cm_apll96_disable(void);
/* CM_CLKSEL_GFX */
#define OMAP_CLKSEL_GFX_SHIFT 0
#define OMAP_CLKSEL_GFX_MASK (0x7 << 0)
#define OMAP_CLKSEL_GFX_WIDTH 3
/* CM_ICLKEN_GFX */
#define OMAP_EN_GFX_SHIFT 0

View File

@ -201,6 +201,7 @@
#define OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO 0x249
#define OMAP44XX_CONTROL_FUSE_CORE_OPP50 0x254
#define OMAP44XX_CONTROL_FUSE_CORE_OPP100 0x257
#define OMAP44XX_CONTROL_FUSE_CORE_OPP100OV 0x25A
/* AM35XX only CONTROL_GENERAL register offsets */
#define AM35XX_CONTROL_MSUSPENDMUX_6 (OMAP2_CONTROL_GENERAL + 0x0038)

View File

@ -24,7 +24,7 @@
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include "iomap.h"
#include "omap_hwmod.h"

View File

@ -28,7 +28,7 @@
#include <linux/init.h>
#include <linux/device.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include "soc.h"
#include "omap_hwmod.h"

View File

@ -29,6 +29,7 @@
#include <linux/clkdev.h>
#include "soc.h"
#include "clockdomain.h"
#include "clock.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
@ -42,7 +43,7 @@
/* Private functions */
/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
{
const struct dpll_data *dd;
u32 v;
@ -56,7 +57,7 @@ static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
}
/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
{
const struct dpll_data *dd;
int i = 0;
@ -64,7 +65,7 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
const char *clk_name;
dd = clk->dpll_data;
clk_name = __clk_get_name(clk);
clk_name = __clk_get_name(clk->hw.clk);
state <<= __ffs(dd->idlest_mask);
@ -88,7 +89,7 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
}
/* From 3430 TRM ES2 4.7.6.2 */
static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
{
unsigned long fint;
u16 f = 0;
@ -133,14 +134,14 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
* locked successfully, return 0; if the DPLL did not lock in the time
* allotted, or DPLL3 was passed in, return -EINVAL.
*/
static int _omap3_noncore_dpll_lock(struct clk *clk)
static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
{
const struct dpll_data *dd;
u8 ai;
u8 state = 1;
int r = 0;
pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk));
pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk));
dd = clk->dpll_data;
state <<= __ffs(dd->idlest_mask);
@ -178,7 +179,7 @@ done:
* DPLL3 was passed in, or the DPLL does not support low-power bypass,
* return -EINVAL.
*/
static int _omap3_noncore_dpll_bypass(struct clk *clk)
static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
{
int r;
u8 ai;
@ -187,7 +188,7 @@ static int _omap3_noncore_dpll_bypass(struct clk *clk)
return -EINVAL;
pr_debug("clock: configuring DPLL %s for low-power bypass\n",
__clk_get_name(clk));
__clk_get_name(clk->hw.clk));
ai = omap3_dpll_autoidle_read(clk);
@ -210,14 +211,14 @@ static int _omap3_noncore_dpll_bypass(struct clk *clk)
* code. If DPLL3 was passed in, or the DPLL does not support
* low-power stop, return -EINVAL; otherwise, return 0.
*/
static int _omap3_noncore_dpll_stop(struct clk *clk)
static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk)
{
u8 ai;
if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
return -EINVAL;
pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk));
pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk));
ai = omap3_dpll_autoidle_read(clk);
@ -241,11 +242,11 @@ static int _omap3_noncore_dpll_stop(struct clk *clk)
* XXX This code is not needed for 3430/AM35xx; can it be optimized
* out in non-multi-OMAP builds for those chips?
*/
static void _lookup_dco(struct clk *clk, u8 *dco, u16 m, u8 n)
static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n)
{
unsigned long fint, clkinp; /* watch out for overflow */
clkinp = __clk_get_rate(__clk_get_parent(clk));
clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
fint = (clkinp / n) * m;
if (fint < 1000000000)
@ -266,12 +267,12 @@ static void _lookup_dco(struct clk *clk, u8 *dco, u16 m, u8 n)
* XXX This code is not needed for 3430/AM35xx; can it be optimized
* out in non-multi-OMAP builds for those chips?
*/
static void _lookup_sddiv(struct clk *clk, u8 *sd_div, u16 m, u8 n)
static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
{
unsigned long clkinp, sd; /* watch out for overflow */
int mod1, mod2;
clkinp = __clk_get_rate(__clk_get_parent(clk));
clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
/*
* target sigma-delta to near 250MHz
@ -298,7 +299,8 @@ static void _lookup_sddiv(struct clk *clk, u8 *sd_div, u16 m, u8 n)
* Program the DPLL with the supplied M, N values, and wait for the DPLL to
* lock.. Returns -EINVAL upon error, or 0 upon success.
*/
static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 m, u8 n,
u16 freqsel)
{
struct dpll_data *dd = clk->dpll_data;
u8 dco, sd_div;
@ -355,8 +357,10 @@ static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
*
* Recalculate and propagate the DPLL rate.
*/
unsigned long omap3_dpll_recalc(struct clk *clk)
unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
return omap2_get_dpll_rate(clk);
}
@ -376,8 +380,9 @@ unsigned long omap3_dpll_recalc(struct clk *clk)
* support low-power stop, or if the DPLL took too long to enter
* bypass or lock, return -EINVAL; otherwise, return 0.
*/
int omap3_noncore_dpll_enable(struct clk *clk)
int omap3_noncore_dpll_enable(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
int r;
struct dpll_data *dd;
struct clk *parent;
@ -386,22 +391,26 @@ int omap3_noncore_dpll_enable(struct clk *clk)
if (!dd)
return -EINVAL;
parent = __clk_get_parent(clk);
if (clk->clkdm) {
r = clkdm_clk_enable(clk->clkdm, hw->clk);
if (r) {
WARN(1,
"%s: could not enable %s's clockdomain %s: %d\n",
__func__, __clk_get_name(hw->clk),
clk->clkdm->name, r);
return r;
}
}
if (__clk_get_rate(clk) == __clk_get_rate(dd->clk_bypass)) {
parent = __clk_get_parent(hw->clk);
if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) {
WARN_ON(parent != dd->clk_bypass);
r = _omap3_noncore_dpll_bypass(clk);
} else {
WARN_ON(parent != dd->clk_ref);
r = _omap3_noncore_dpll_lock(clk);
}
/*
*FIXME: this is dubious - if clk->rate has changed, what about
* propagating?
*/
if (!r)
clk->rate = (clk->recalc) ? clk->recalc(clk) :
omap2_get_dpll_rate(clk);
return r;
}
@ -413,9 +422,13 @@ int omap3_noncore_dpll_enable(struct clk *clk)
* Instructs a non-CORE DPLL to enter low-power stop. This function is
* intended for use in struct clkops. No return value.
*/
void omap3_noncore_dpll_disable(struct clk *clk)
void omap3_noncore_dpll_disable(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
_omap3_noncore_dpll_stop(clk);
if (clk->clkdm)
clkdm_clk_disable(clk->clkdm, hw->clk);
}
@ -432,80 +445,72 @@ void omap3_noncore_dpll_disable(struct clk *clk)
* target rate if it hasn't been done already, then program and lock
* the DPLL. Returns -EINVAL upon error, or 0 upon success.
*/
int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
struct clk *new_parent = NULL;
unsigned long hw_rate, bypass_rate;
u16 freqsel = 0;
struct dpll_data *dd;
int ret;
if (!clk || !rate)
if (!hw || !rate)
return -EINVAL;
dd = clk->dpll_data;
if (!dd)
return -EINVAL;
hw_rate = (clk->recalc) ? clk->recalc(clk) : omap2_get_dpll_rate(clk);
if (rate == hw_rate)
return 0;
__clk_prepare(dd->clk_bypass);
clk_enable(dd->clk_bypass);
__clk_prepare(dd->clk_ref);
clk_enable(dd->clk_ref);
/*
* Ensure both the bypass and ref clocks are enabled prior to
* doing anything; we need the bypass clock running to reprogram
* the DPLL.
*/
omap2_clk_enable(dd->clk_bypass);
omap2_clk_enable(dd->clk_ref);
bypass_rate = __clk_get_rate(dd->clk_bypass);
if (bypass_rate == rate &&
(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
if (__clk_get_rate(dd->clk_bypass) == rate &&
(dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
pr_debug("%s: %s: set rate: entering bypass.\n",
__func__, __clk_get_name(hw->clk));
ret = _omap3_noncore_dpll_bypass(clk);
if (!ret)
new_parent = dd->clk_bypass;
} else {
if (dd->last_rounded_rate != rate)
rate = clk->round_rate(clk, rate);
rate = __clk_round_rate(hw->clk, rate);
if (dd->last_rounded_rate == 0)
return -EINVAL;
/* No freqsel on OMAP4 and OMAP3630 */
if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) {
if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
freqsel = _omap3_dpll_compute_freqsel(clk,
dd->last_rounded_n);
if (!freqsel)
WARN_ON(1);
}
pr_debug("clock: %s: set rate: locking rate to %lu.\n",
__clk_get_name(clk), rate);
pr_debug("%s: %s: set rate: locking rate to %lu.\n",
__func__, __clk_get_name(hw->clk), rate);
ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
dd->last_rounded_n, freqsel);
dd->last_rounded_n, freqsel);
if (!ret)
new_parent = dd->clk_ref;
}
if (!ret) {
/*
* Switch the parent clock in the hierarchy, and make sure
* that the new parent's usecount is correct. Note: we
* enable the new parent before disabling the old to avoid
* any unnecessary hardware disable->enable transitions.
*/
if (clk->usecount) {
omap2_clk_enable(new_parent);
omap2_clk_disable(clk->parent);
}
clk_reparent(clk, new_parent);
clk->rate = rate;
}
omap2_clk_disable(dd->clk_ref);
omap2_clk_disable(dd->clk_bypass);
/*
* FIXME - this is all wrong. common code handles reparenting and
* migrating prepare/enable counts. dplls should be a multiplexer
* clock and this should be a set_parent operation so that all of that
* stuff is inherited for free
*/
if (!ret)
__clk_reparent(hw->clk, new_parent);
clk_disable(dd->clk_ref);
__clk_unprepare(dd->clk_ref);
clk_disable(dd->clk_bypass);
__clk_unprepare(dd->clk_bypass);
return 0;
}
@ -520,7 +525,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
* -EINVAL if passed a null pointer or if the struct clk does not
* appear to refer to a DPLL.
*/
u32 omap3_dpll_autoidle_read(struct clk *clk)
u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
{
const struct dpll_data *dd;
u32 v;
@ -549,7 +554,7 @@ u32 omap3_dpll_autoidle_read(struct clk *clk)
* OMAP3430. The DPLL will enter low-power stop when its downstream
* clocks are gated. No return value.
*/
void omap3_dpll_allow_idle(struct clk *clk)
void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
{
const struct dpll_data *dd;
u32 v;
@ -559,11 +564,8 @@ void omap3_dpll_allow_idle(struct clk *clk)
dd = clk->dpll_data;
if (!dd->autoidle_reg) {
pr_debug("clock: DPLL %s: autoidle not supported\n",
__clk_get_name(clk));
if (!dd->autoidle_reg)
return;
}
/*
* REVISIT: CORE DPLL can optionally enter low-power bypass
@ -583,7 +585,7 @@ void omap3_dpll_allow_idle(struct clk *clk)
*
* Disable DPLL automatic idle control. No return value.
*/
void omap3_dpll_deny_idle(struct clk *clk)
void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
{
const struct dpll_data *dd;
u32 v;
@ -593,11 +595,8 @@ void omap3_dpll_deny_idle(struct clk *clk)
dd = clk->dpll_data;
if (!dd->autoidle_reg) {
pr_debug("clock: DPLL %s: autoidle not supported\n",
__clk_get_name(clk));
if (!dd->autoidle_reg)
return;
}
v = __raw_readl(dd->autoidle_reg);
v &= ~dd->autoidle_mask;
@ -615,18 +614,25 @@ void omap3_dpll_deny_idle(struct clk *clk)
* Using parent clock DPLL data, look up DPLL state. If locked, set our
* rate to the dpll_clk * 2; otherwise, just use dpll_clk.
*/
unsigned long omap3_clkoutx2_recalc(struct clk *clk)
unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
unsigned long parent_rate)
{
const struct dpll_data *dd;
unsigned long rate;
u32 v;
struct clk *pclk;
unsigned long parent_rate;
struct clk_hw_omap *pclk = NULL;
struct clk *parent;
/* Walk up the parents of clk, looking for a DPLL */
pclk = __clk_get_parent(clk);
while (pclk && !pclk->dpll_data)
pclk = __clk_get_parent(pclk);
do {
do {
parent = __clk_get_parent(hw->clk);
hw = __clk_get_hw(parent);
} while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
if (!hw)
break;
pclk = to_clk_hw_omap(hw);
} while (pclk && !pclk->dpll_data);
/* clk does not have a DPLL as a parent? error in the clock data */
if (!pclk) {
@ -638,7 +644,6 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk)
WARN_ON(!dd->enable_mask);
parent_rate = __clk_get_rate(__clk_get_parent(clk));
v = __raw_readl(dd->control_reg) & dd->enable_mask;
v >>= __ffs(dd->enable_mask);
if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
@ -649,15 +654,7 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk)
}
/* OMAP3/4 non-CORE DPLL clkops */
const struct clkops clkops_omap3_noncore_dpll_ops = {
.enable = omap3_noncore_dpll_enable,
.disable = omap3_noncore_dpll_disable,
.allow_idle = omap3_dpll_allow_idle,
.deny_idle = omap3_dpll_deny_idle,
};
const struct clkops clkops_omap3_core_dpll_ops = {
const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
.allow_idle = omap3_dpll_allow_idle,
.deny_idle = omap3_dpll_deny_idle,
};

View File

@ -21,7 +21,7 @@
#include "cm-regbits-44xx.h"
/* Supported only on OMAP4 */
int omap4_dpllmx_gatectrl_read(struct clk *clk)
int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk)
{
u32 v;
u32 mask;
@ -40,7 +40,7 @@ int omap4_dpllmx_gatectrl_read(struct clk *clk)
return v;
}
void omap4_dpllmx_allow_gatectrl(struct clk *clk)
void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
{
u32 v;
u32 mask;
@ -58,7 +58,7 @@ void omap4_dpllmx_allow_gatectrl(struct clk *clk)
__raw_writel(v, clk->clksel_reg);
}
void omap4_dpllmx_deny_gatectrl(struct clk *clk)
void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
{
u32 v;
u32 mask;
@ -76,9 +76,9 @@ void omap4_dpllmx_deny_gatectrl(struct clk *clk)
__raw_writel(v, clk->clksel_reg);
}
const struct clkops clkops_omap4_dpllmx_ops = {
const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
.allow_idle = omap4_dpllmx_allow_gatectrl,
.deny_idle = omap4_dpllmx_deny_gatectrl,
.deny_idle = omap4_dpllmx_deny_gatectrl,
};
/**
@ -90,8 +90,10 @@ const struct clkops clkops_omap4_dpllmx_ops = {
* OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers)
* upon success, or 0 upon error.
*/
unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk)
unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 v;
unsigned long rate;
struct dpll_data *dd;
@ -123,8 +125,11 @@ unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk)
* M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
* ~0 if an error occurred in omap2_dpll_round_rate().
*/
long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate)
long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
unsigned long target_rate,
unsigned long *parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 v;
struct dpll_data *dd;
long r;
@ -140,7 +145,7 @@ long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate)
if (v)
target_rate = target_rate / OMAP4430_REGM4XEN_MULT;
r = omap2_dpll_round_rate(clk, target_rate);
r = omap2_dpll_round_rate(hw, target_rate, NULL);
if (r == ~0)
return r;

View File

@ -25,7 +25,7 @@
#include <asm/tlb.h>
#include <asm/mach/map.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include "omap_hwmod.h"
#include "soc.h"
@ -50,6 +50,9 @@
#include "prcm_mpu44xx.h"
#include "prminst44xx.h"
#include "cminst44xx.h"
#include "prm2xxx.h"
#include "prm3xxx.h"
#include "prm44xx.h"
/*
* The machine specific code may provide the extra mapping besides the
@ -387,6 +390,7 @@ void __init omap2420_init_early(void)
omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE));
omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), NULL);
omap2xxx_check_revision();
omap2xxx_prm_init();
omap2xxx_cm_init();
omap2xxx_voltagedomains_init();
omap242x_powerdomains_init();
@ -401,6 +405,7 @@ void __init omap2420_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap2_pm_init();
omap2_clk_enable_autoidle_all();
}
#endif
@ -415,6 +420,7 @@ void __init omap2430_init_early(void)
omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE));
omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), NULL);
omap2xxx_check_revision();
omap2xxx_prm_init();
omap2xxx_cm_init();
omap2xxx_voltagedomains_init();
omap243x_powerdomains_init();
@ -429,6 +435,7 @@ void __init omap2430_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap2_pm_init();
omap2_clk_enable_autoidle_all();
}
#endif
@ -448,6 +455,7 @@ void __init omap3_init_early(void)
omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL);
omap3xxx_check_revision();
omap3xxx_check_features();
omap3xxx_prm_init();
omap3xxx_cm_init();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
@ -500,6 +508,7 @@ void __init omap3_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
omap2_clk_enable_autoidle_all();
}
void __init omap3430_init_late(void)
@ -507,6 +516,7 @@ void __init omap3430_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
omap2_clk_enable_autoidle_all();
}
void __init omap35xx_init_late(void)
@ -514,6 +524,7 @@ void __init omap35xx_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
omap2_clk_enable_autoidle_all();
}
void __init omap3630_init_late(void)
@ -521,6 +532,7 @@ void __init omap3630_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
omap2_clk_enable_autoidle_all();
}
void __init am35xx_init_late(void)
@ -528,6 +540,7 @@ void __init am35xx_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
omap2_clk_enable_autoidle_all();
}
void __init ti81xx_init_late(void)
@ -535,6 +548,7 @@ void __init ti81xx_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap3_pm_init();
omap2_clk_enable_autoidle_all();
}
#endif
@ -573,6 +587,7 @@ void __init omap4430_init_early(void)
omap_cm_base_init();
omap4xxx_check_revision();
omap4xxx_check_features();
omap44xx_prm_init();
omap44xx_voltagedomains_init();
omap44xx_powerdomains_init();
omap44xx_clockdomains_init();
@ -586,6 +601,7 @@ void __init omap4430_init_late(void)
omap_mux_late_init();
omap2_common_pm_late_init();
omap4_pm_init();
omap2_clk_enable_autoidle_all();
}
#endif

View File

@ -21,7 +21,7 @@
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/pm_runtime.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include "omap_device.h"

View File

@ -441,19 +441,21 @@ int omap_device_get_context_loss_count(struct platform_device *pdev)
/**
* omap_device_count_resources - count number of struct resource entries needed
* @od: struct omap_device *
* @flags: Type of resources to include when counting (IRQ/DMA/MEM)
*
* Count the number of struct resource entries needed for this
* omap_device @od. Used by omap_device_build_ss() to determine how
* much memory to allocate before calling
* omap_device_fill_resources(). Returns the count.
*/
static int omap_device_count_resources(struct omap_device *od)
static int omap_device_count_resources(struct omap_device *od,
unsigned long flags)
{
int c = 0;
int i;
for (i = 0; i < od->hwmods_cnt; i++)
c += omap_hwmod_count_resources(od->hwmods[i]);
c += omap_hwmod_count_resources(od->hwmods[i], flags);
pr_debug("omap_device: %s: counted %d total resources across %d hwmods\n",
od->pdev->name, c, od->hwmods_cnt);
@ -557,52 +559,73 @@ struct omap_device *omap_device_alloc(struct platform_device *pdev,
od->hwmods = hwmods;
od->pdev = pdev;
res_count = omap_device_count_resources(od);
/*
* Non-DT Boot:
* Here, pdev->num_resources = 0, and we should get all the
* resources from hwmod.
*
* DT Boot:
* OF framework will construct the resource structure (currently
* does for MEM & IRQ resource) and we should respect/use these
* resources, killing hwmod dependency.
* If pdev->num_resources > 0, we assume that MEM & IRQ resources
* have been allocated by OF layer already (through DTB).
*
* Non-DT Boot:
* Here, pdev->num_resources = 0, and we should get all the
* resources from hwmod.
* As preparation for the future we examine the OF provided resources
* to see if we have DMA resources provided already. In this case
* there is no need to update the resources for the device, we use the
* OF provided ones.
*
* TODO: Once DMA resource is available from OF layer, we should
* kill filling any resources from hwmod.
*/
if (res_count > pdev->num_resources) {
/* Allocate resources memory to account for new resources */
res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
if (!res)
goto oda_exit3;
if (!pdev->num_resources) {
/* Count all resources for the device */
res_count = omap_device_count_resources(od, IORESOURCE_IRQ |
IORESOURCE_DMA |
IORESOURCE_MEM);
} else {
/* Take a look if we already have DMA resource via DT */
for (i = 0; i < pdev->num_resources; i++) {
struct resource *r = &pdev->resource[i];
/*
* If pdev->num_resources > 0, then assume that,
* MEM and IRQ resources will only come from DT and only
* fill DMA resource from hwmod layer.
*/
if (pdev->num_resources && pdev->resource) {
dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n",
__func__, res_count);
memcpy(res, pdev->resource,
sizeof(struct resource) * pdev->num_resources);
_od_fill_dma_resources(od, &res[pdev->num_resources]);
} else {
dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n",
__func__, res_count);
omap_device_fill_resources(od, res);
/* We have it, no need to touch the resources */
if (r->flags == IORESOURCE_DMA)
goto have_everything;
}
/* Count only DMA resources for the device */
res_count = omap_device_count_resources(od, IORESOURCE_DMA);
/* The device has no DMA resource, no need for update */
if (!res_count)
goto have_everything;
ret = platform_device_add_resources(pdev, res, res_count);
kfree(res);
if (ret)
goto oda_exit3;
res_count += pdev->num_resources;
}
/* Allocate resources memory to account for new resources */
res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
if (!res)
goto oda_exit3;
if (!pdev->num_resources) {
dev_dbg(&pdev->dev, "%s: using %d resources from hwmod\n",
__func__, res_count);
omap_device_fill_resources(od, res);
} else {
dev_dbg(&pdev->dev,
"%s: appending %d DMA resources from hwmod\n",
__func__, res_count - pdev->num_resources);
memcpy(res, pdev->resource,
sizeof(struct resource) * pdev->num_resources);
_od_fill_dma_resources(od, &res[pdev->num_resources]);
}
ret = platform_device_add_resources(pdev, res, res_count);
kfree(res);
if (ret)
goto oda_exit3;
have_everything:
if (!pm_lats) {
pm_lats = omap_default_latency;
pm_lats_cnt = ARRAY_SIZE(omap_default_latency);

View File

@ -130,7 +130,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/list.h>
@ -187,6 +187,8 @@ struct omap_hwmod_soc_ops {
int (*is_hardreset_asserted)(struct omap_hwmod *oh,
struct omap_hwmod_rst_info *ohri);
int (*init_clkdm)(struct omap_hwmod *oh);
void (*update_context_lost)(struct omap_hwmod *oh);
int (*get_context_lost)(struct omap_hwmod *oh);
};
/* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */
@ -646,6 +648,19 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v)
return 0;
}
static struct clockdomain *_get_clkdm(struct omap_hwmod *oh)
{
struct clk_hw_omap *clk;
if (oh->clkdm) {
return oh->clkdm;
} else if (oh->_clk) {
clk = to_clk_hw_omap(__clk_get_hw(oh->_clk));
return clk->clkdm;
}
return NULL;
}
/**
* _add_initiator_dep: prevent @oh from smart-idling while @init_oh is active
* @oh: struct omap_hwmod *
@ -661,13 +676,18 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v)
*/
static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
{
if (!oh->_clk)
struct clockdomain *clkdm, *init_clkdm;
clkdm = _get_clkdm(oh);
init_clkdm = _get_clkdm(init_oh);
if (!clkdm || !init_clkdm)
return -EINVAL;
if (oh->_clk->clkdm && oh->_clk->clkdm->flags & CLKDM_NO_AUTODEPS)
if (clkdm && clkdm->flags & CLKDM_NO_AUTODEPS)
return 0;
return clkdm_add_sleepdep(oh->_clk->clkdm, init_oh->_clk->clkdm);
return clkdm_add_sleepdep(clkdm, init_clkdm);
}
/**
@ -685,13 +705,18 @@ static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
*/
static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
{
if (!oh->_clk)
struct clockdomain *clkdm, *init_clkdm;
clkdm = _get_clkdm(oh);
init_clkdm = _get_clkdm(init_oh);
if (!clkdm || !init_clkdm)
return -EINVAL;
if (oh->_clk->clkdm && oh->_clk->clkdm->flags & CLKDM_NO_AUTODEPS)
if (clkdm && clkdm->flags & CLKDM_NO_AUTODEPS)
return 0;
return clkdm_del_sleepdep(oh->_clk->clkdm, init_oh->_clk->clkdm);
return clkdm_del_sleepdep(clkdm, init_clkdm);
}
/**
@ -725,7 +750,7 @@ static int _init_main_clk(struct omap_hwmod *oh)
*/
clk_prepare(oh->_clk);
if (!oh->_clk->clkdm)
if (!_get_clkdm(oh))
pr_debug("omap_hwmod: %s: missing clockdomain for %s.\n",
oh->name, oh->main_clk);
@ -1308,6 +1333,7 @@ static void _enable_sysc(struct omap_hwmod *oh)
u8 idlemode, sf;
u32 v;
bool clkdm_act;
struct clockdomain *clkdm;
if (!oh->class->sysc)
return;
@ -1327,11 +1353,9 @@ static void _enable_sysc(struct omap_hwmod *oh)
v = oh->_sysc_cache;
sf = oh->class->sysc->sysc_flags;
clkdm = _get_clkdm(oh);
if (sf & SYSC_HAS_SIDLEMODE) {
clkdm_act = ((oh->clkdm &&
oh->clkdm->flags & CLKDM_ACTIVE_WITH_MPU) ||
(oh->_clk && oh->_clk->clkdm &&
oh->_clk->clkdm->flags & CLKDM_ACTIVE_WITH_MPU));
clkdm_act = (clkdm && clkdm->flags & CLKDM_ACTIVE_WITH_MPU);
if (clkdm_act && !(oh->class->sysc->idlemodes &
(SIDLE_SMART | SIDLE_SMART_WKUP)))
idlemode = HWMOD_IDLEMODE_FORCE;
@ -1533,11 +1557,12 @@ static int _init_clocks(struct omap_hwmod *oh, void *data)
pr_debug("omap_hwmod: %s: looking up clocks\n", oh->name);
if (soc_ops.init_clkdm)
ret |= soc_ops.init_clkdm(oh);
ret |= _init_main_clk(oh);
ret |= _init_interface_clks(oh);
ret |= _init_opt_clks(oh);
if (soc_ops.init_clkdm)
ret |= soc_ops.init_clkdm(oh);
if (!ret)
oh->_state = _HWMOD_STATE_CLKS_INITED;
@ -1991,6 +2016,42 @@ static void _reconfigure_io_chain(void)
spin_unlock_irqrestore(&io_chain_lock, flags);
}
/**
* _omap4_update_context_lost - increment hwmod context loss counter if
* hwmod context was lost, and clear hardware context loss reg
* @oh: hwmod to check for context loss
*
* If the PRCM indicates that the hwmod @oh lost context, increment
* our in-memory context loss counter, and clear the RM_*_CONTEXT
* bits. No return value.
*/
static void _omap4_update_context_lost(struct omap_hwmod *oh)
{
if (oh->prcm.omap4.flags & HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT)
return;
if (!prm_was_any_context_lost_old(oh->clkdm->pwrdm.ptr->prcm_partition,
oh->clkdm->pwrdm.ptr->prcm_offs,
oh->prcm.omap4.context_offs))
return;
oh->prcm.omap4.context_lost_counter++;
prm_clear_context_loss_flags_old(oh->clkdm->pwrdm.ptr->prcm_partition,
oh->clkdm->pwrdm.ptr->prcm_offs,
oh->prcm.omap4.context_offs);
}
/**
* _omap4_get_context_lost - get context loss counter for a hwmod
* @oh: hwmod to get context loss counter for
*
* Returns the in-memory context loss counter for a hwmod.
*/
static int _omap4_get_context_lost(struct omap_hwmod *oh)
{
return oh->prcm.omap4.context_lost_counter;
}
/**
* _enable - enable an omap_hwmod
* @oh: struct omap_hwmod *
@ -2074,6 +2135,9 @@ static int _enable(struct omap_hwmod *oh)
if (soc_ops.enable_module)
soc_ops.enable_module(oh);
if (soc_ops.update_context_lost)
soc_ops.update_context_lost(oh);
r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) :
-EINVAL;
if (!r) {
@ -3398,7 +3462,7 @@ int omap_hwmod_reset(struct omap_hwmod *oh)
/**
* omap_hwmod_count_resources - count number of struct resources needed by hwmod
* @oh: struct omap_hwmod *
* @res: pointer to the first element of an array of struct resource to fill
* @flags: Type of resources to include when counting (IRQ/DMA/MEM)
*
* Count the number of struct resource array elements necessary to
* contain omap_hwmod @oh resources. Intended to be called by code
@ -3411,20 +3475,25 @@ int omap_hwmod_reset(struct omap_hwmod *oh)
* resource IDs.
*
*/
int omap_hwmod_count_resources(struct omap_hwmod *oh)
int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags)
{
struct omap_hwmod_ocp_if *os;
struct list_head *p;
int ret;
int i = 0;
int ret = 0;
ret = _count_mpu_irqs(oh) + _count_sdma_reqs(oh);
if (flags & IORESOURCE_IRQ)
ret += _count_mpu_irqs(oh);
p = oh->slave_ports.next;
if (flags & IORESOURCE_DMA)
ret += _count_sdma_reqs(oh);
while (i < oh->slaves_cnt) {
os = _fetch_next_ocp_if(&p, &i);
ret += _count_ocp_if_addr_spaces(os);
if (flags & IORESOURCE_MEM) {
int i = 0;
struct omap_hwmod_ocp_if *os;
struct list_head *p = oh->slave_ports.next;
while (i < oh->slaves_cnt) {
os = _fetch_next_ocp_if(&p, &i);
ret += _count_ocp_if_addr_spaces(os);
}
}
return ret;
@ -3591,10 +3660,15 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
{
struct clk *c;
struct omap_hwmod_ocp_if *oi;
struct clockdomain *clkdm;
struct clk_hw_omap *clk;
if (!oh)
return NULL;
if (oh->clkdm)
return oh->clkdm->pwrdm.ptr;
if (oh->_clk) {
c = oh->_clk;
} else {
@ -3604,11 +3678,12 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
c = oi->_clk;
}
if (!c->clkdm)
clk = to_clk_hw_omap(__clk_get_hw(c));
clkdm = clk->clkdm;
if (!clkdm)
return NULL;
return c->clkdm->pwrdm.ptr;
return clkdm->pwrdm.ptr;
}
/**
@ -3913,17 +3988,21 @@ ohsps_unlock:
* omap_hwmod_get_context_loss_count - get lost context count
* @oh: struct omap_hwmod *
*
* Query the powerdomain of of @oh to get the context loss
* count for this device.
* Returns the context loss count of associated @oh
* upon success, or zero if no context loss data is available.
*
* Returns the context loss count of the powerdomain assocated with @oh
* upon success, or zero if no powerdomain exists for @oh.
* On OMAP4, this queries the per-hwmod context loss register,
* assuming one exists. If not, or on OMAP2/3, this queries the
* enclosing powerdomain context loss count.
*/
int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
{
struct powerdomain *pwrdm;
int ret = 0;
if (soc_ops.get_context_lost)
return soc_ops.get_context_lost(oh);
pwrdm = omap_hwmod_get_pwrdm(oh);
if (pwrdm)
ret = pwrdm_get_context_loss_count(pwrdm);
@ -4038,6 +4117,8 @@ void __init omap_hwmod_init(void)
soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
soc_ops.init_clkdm = _init_clkdm;
soc_ops.update_context_lost = _omap4_update_context_lost;
soc_ops.get_context_lost = _omap4_get_context_lost;
} else if (soc_is_am33xx()) {
soc_ops.enable_module = _am33xx_enable_module;
soc_ops.disable_module = _am33xx_disable_module;

View File

@ -2,7 +2,7 @@
* omap_hwmod macros, structures
*
* Copyright (C) 2009-2011 Nokia Corporation
* Copyright (C) 2012 Texas Instruments, Inc.
* Copyright (C) 2011-2012 Texas Instruments, Inc.
* Paul Walmsley
*
* Created in collaboration with (alphabetical order): Benoît Cousson,
@ -394,12 +394,15 @@ struct omap_hwmod_omap2_prcm {
/**
* struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
* @clkctrl_reg: PRCM address of the clock control register
* @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
* @clkctrl_offs: offset of the PRCM clock control register
* @rstctrl_offs: offset of the XXX_RSTCTRL register located in the PRM
* @context_offs: offset of the RM_*_CONTEXT register
* @lostcontext_mask: bitmask for selecting bits from RM_*_CONTEXT register
* @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM
* @submodule_wkdep_bit: bit shift of the WKDEP range
* @flags: PRCM register capabilities for this IP block
* @modulemode: allowable modulemodes
* @context_lost_counter: Count of module level context lost
*
* If @lostcontext_mask is not defined, context loss check code uses
* whole register without masking. @lostcontext_mask should only be
@ -415,6 +418,7 @@ struct omap_hwmod_omap4_prcm {
u8 submodule_wkdep_bit;
u8 modulemode;
u8 flags;
int context_lost_counter;
};
@ -633,7 +637,7 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
int omap_hwmod_softreset(struct omap_hwmod *oh);
int omap_hwmod_count_resources(struct omap_hwmod *oh);
int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags);
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res);
int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,

View File

@ -15,8 +15,8 @@
#include <linux/i2c-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include <plat/dmtimer.h>
#include "omap_hwmod.h"
#include "l3_2xxx.h"

View File

@ -16,8 +16,8 @@
#include <linux/i2c-omap.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include <plat/dmtimer.h>
#include "omap_hwmod.h"
#include "mmc.h"

View File

@ -10,7 +10,8 @@
* published by the Free Software Foundation.
*/
#include <plat-omap/dma-omap.h>
#include <linux/dmaengine.h>
#include <linux/omap-dma.h>
#include "omap_hwmod.h"
#include "hdq1w.h"

View File

@ -10,7 +10,7 @@
*/
#include <linux/platform_data/gpio-omap.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include <plat/dmtimer.h>
#include <linux/platform_data/spi-omap2-mcspi.h>

View File

@ -19,7 +19,7 @@
#include <linux/power/smartreflex.h>
#include <linux/platform_data/gpio-omap.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include "l3_3xxx.h"
#include "l4_3xxx.h"
#include <linux/platform_data/asoc-ti-mcbsp.h>

View File

@ -21,9 +21,10 @@
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/platform_data/omap_ocp2scp.h>
#include <linux/i2c-omap.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include <linux/platform_data/omap_ocp2scp.h>
#include <linux/platform_data/spi-omap2-mcspi.h>

View File

@ -89,8 +89,11 @@ extern struct omap_volt_data omap34xx_vddcore_volt_data[];
extern struct omap_volt_data omap36xx_vddmpu_volt_data[];
extern struct omap_volt_data omap36xx_vddcore_volt_data[];
extern struct omap_volt_data omap44xx_vdd_mpu_volt_data[];
extern struct omap_volt_data omap44xx_vdd_iva_volt_data[];
extern struct omap_volt_data omap44xx_vdd_core_volt_data[];
extern struct omap_volt_data omap443x_vdd_mpu_volt_data[];
extern struct omap_volt_data omap443x_vdd_iva_volt_data[];
extern struct omap_volt_data omap443x_vdd_core_volt_data[];
extern struct omap_volt_data omap446x_vdd_mpu_volt_data[];
extern struct omap_volt_data omap446x_vdd_iva_volt_data[];
extern struct omap_volt_data omap446x_vdd_core_volt_data[];
#endif /* __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H */

View File

@ -33,6 +33,38 @@
#include "control.h"
#include "usb.h"
#define CONTROL_DEV_CONF 0x300
#define PHY_PD 0x1
/**
* omap4430_phy_power_down: disable MUSB PHY during early init
*
* OMAP4 MUSB PHY module is enabled by default on reset, but this will
* prevent core retention if not disabled by SW. USB driver will
* later on enable this, once and if the driver needs it.
*/
static int __init omap4430_phy_power_down(void)
{
void __iomem *ctrl_base;
if (!cpu_is_omap44xx())
return 0;
ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
if (!ctrl_base) {
pr_err("control module ioremap failed\n");
return -ENOMEM;
}
/* Power down the phy */
__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
iounmap(ctrl_base);
return 0;
}
early_initcall(omap4430_phy_power_down);
void am35x_musb_reset(void)
{
u32 regval;

View File

@ -31,16 +31,6 @@
#define OMAP3_VP_VSTEPMAX_VSTEPMAX 0x04
#define OMAP3_VP_VLIMITTO_TIMEOUT_US 200
#define OMAP3430_VP1_VLIMITTO_VDDMIN 0x14
#define OMAP3430_VP1_VLIMITTO_VDDMAX 0x42
#define OMAP3430_VP2_VLIMITTO_VDDMIN 0x18
#define OMAP3430_VP2_VLIMITTO_VDDMAX 0x2c
#define OMAP3630_VP1_VLIMITTO_VDDMIN 0x18
#define OMAP3630_VP1_VLIMITTO_VDDMAX 0x3c
#define OMAP3630_VP2_VLIMITTO_VDDMIN 0x18
#define OMAP3630_VP2_VLIMITTO_VDDMAX 0x30
#define OMAP4_SRI2C_SLAVE_ADDR 0x12
#define OMAP4_VDD_MPU_SR_VOLT_REG 0x55
#define OMAP4_VDD_MPU_SR_CMD_REG 0x56
@ -54,13 +44,6 @@
#define OMAP4_VP_VSTEPMAX_VSTEPMAX 0x04
#define OMAP4_VP_VLIMITTO_TIMEOUT_US 200
#define OMAP4_VP_MPU_VLIMITTO_VDDMIN 0xA
#define OMAP4_VP_MPU_VLIMITTO_VDDMAX 0x39
#define OMAP4_VP_IVA_VLIMITTO_VDDMIN 0xA
#define OMAP4_VP_IVA_VLIMITTO_VDDMAX 0x2D
#define OMAP4_VP_CORE_VLIMITTO_VDDMIN 0xA
#define OMAP4_VP_CORE_VLIMITTO_VDDMAX 0x28
static bool is_offset_valid;
static u8 smps_offset;
/*
@ -159,16 +142,11 @@ static u8 twl6030_uv_to_vsel(unsigned long uv)
static struct omap_voltdm_pmic omap3_mpu_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1200000,
.onlp_volt = 1000000,
.ret_volt = 975000,
.off_volt = 600000,
.volt_setup_time = 0xfff,
.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
.vp_vddmin = OMAP3430_VP1_VLIMITTO_VDDMIN,
.vp_vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX,
.vddmin = 600000,
.vddmax = 1450000,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG,
@ -180,16 +158,11 @@ static struct omap_voltdm_pmic omap3_mpu_pmic = {
static struct omap_voltdm_pmic omap3_core_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1200000,
.onlp_volt = 1000000,
.ret_volt = 975000,
.off_volt = 600000,
.volt_setup_time = 0xfff,
.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
.vp_vddmin = OMAP3430_VP2_VLIMITTO_VDDMIN,
.vp_vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX,
.vddmin = 600000,
.vddmax = 1450000,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG,
@ -201,21 +174,17 @@ static struct omap_voltdm_pmic omap3_core_pmic = {
static struct omap_voltdm_pmic omap4_mpu_pmic = {
.slew_rate = 4000,
.step_size = 12660,
.on_volt = 1375000,
.onlp_volt = 1375000,
.ret_volt = 830000,
.off_volt = 0,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
.vp_vddmin = OMAP4_VP_MPU_VLIMITTO_VDDMIN,
.vp_vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX,
.vddmin = 0,
.vddmax = 2100000,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG,
.cmd_reg_addr = OMAP4_VDD_MPU_SR_CMD_REG,
.i2c_high_speed = true,
.i2c_pad_load = 3,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
@ -223,21 +192,17 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = {
static struct omap_voltdm_pmic omap4_iva_pmic = {
.slew_rate = 4000,
.step_size = 12660,
.on_volt = 1188000,
.onlp_volt = 1188000,
.ret_volt = 830000,
.off_volt = 0,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
.vp_vddmin = OMAP4_VP_IVA_VLIMITTO_VDDMIN,
.vp_vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX,
.vddmin = 0,
.vddmax = 2100000,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG,
.cmd_reg_addr = OMAP4_VDD_IVA_SR_CMD_REG,
.i2c_high_speed = true,
.i2c_pad_load = 3,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
@ -245,20 +210,17 @@ static struct omap_voltdm_pmic omap4_iva_pmic = {
static struct omap_voltdm_pmic omap4_core_pmic = {
.slew_rate = 4000,
.step_size = 12660,
.on_volt = 1200000,
.onlp_volt = 1200000,
.ret_volt = 830000,
.off_volt = 0,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
.vp_vddmin = OMAP4_VP_CORE_VLIMITTO_VDDMIN,
.vp_vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX,
.vddmin = 0,
.vddmax = 2100000,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG,
.cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG,
.i2c_high_speed = true,
.i2c_pad_load = 3,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
@ -289,13 +251,6 @@ int __init omap3_twl_init(void)
if (!cpu_is_omap34xx())
return -ENODEV;
if (cpu_is_omap3630()) {
omap3_mpu_pmic.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
omap3_mpu_pmic.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
omap3_core_pmic.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
omap3_core_pmic.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
}
/*
* The smartreflex bit on twl4030 specifies if the setting of voltage
* is done over the I2C_SR path. Since this setting is independent of

View File

@ -1,7 +1,7 @@
/*
* OMAP4 OPP table definitions.
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
* Copyright (C) 2010-2012 Texas Instruments Incorporated - http://www.ti.com/
* Nishanth Menon
* Kevin Hilman
* Thara Gopinath
@ -35,7 +35,7 @@
#define OMAP4430_VDD_MPU_OPPTURBO_UV 1313000
#define OMAP4430_VDD_MPU_OPPNITRO_UV 1375000
struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = {
struct omap_volt_data omap443x_vdd_mpu_volt_data[] = {
VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16),
VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23),
@ -47,7 +47,7 @@ struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = {
#define OMAP4430_VDD_IVA_OPP100_UV 1188000
#define OMAP4430_VDD_IVA_OPPTURBO_UV 1300000
struct omap_volt_data omap44xx_vdd_iva_volt_data[] = {
struct omap_volt_data omap443x_vdd_iva_volt_data[] = {
VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16),
VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23),
@ -57,14 +57,14 @@ struct omap_volt_data omap44xx_vdd_iva_volt_data[] = {
#define OMAP4430_VDD_CORE_OPP50_UV 1025000
#define OMAP4430_VDD_CORE_OPP100_UV 1200000
struct omap_volt_data omap44xx_vdd_core_volt_data[] = {
struct omap_volt_data omap443x_vdd_core_volt_data[] = {
VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP100_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16),
VOLT_DATA_DEFINE(0, 0, 0, 0),
};
static struct omap_opp_def __initdata omap44xx_opp_def_list[] = {
static struct omap_opp_def __initdata omap443x_opp_def_list[] = {
/* MPU OPP1 - OPP50 */
OPP_INITIALIZER("mpu", true, 300000000, OMAP4430_VDD_MPU_OPP50_UV),
/* MPU OPP2 - OPP100 */
@ -86,6 +86,82 @@ static struct omap_opp_def __initdata omap44xx_opp_def_list[] = {
/* TODO: add DSP, aess, fdif, gpu */
};
#define OMAP4460_VDD_MPU_OPP50_UV 1025000
#define OMAP4460_VDD_MPU_OPP100_UV 1200000
#define OMAP4460_VDD_MPU_OPPTURBO_UV 1313000
#define OMAP4460_VDD_MPU_OPPNITRO_UV 1375000
struct omap_volt_data omap446x_vdd_mpu_volt_data[] = {
VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16),
VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23),
VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27),
VOLT_DATA_DEFINE(0, 0, 0, 0),
};
#define OMAP4460_VDD_IVA_OPP50_UV 1025000
#define OMAP4460_VDD_IVA_OPP100_UV 1200000
#define OMAP4460_VDD_IVA_OPPTURBO_UV 1313000
#define OMAP4460_VDD_IVA_OPPNITRO_UV 1375000
struct omap_volt_data omap446x_vdd_iva_volt_data[] = {
VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16),
VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23),
VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPNITRO, 0xfa, 0x23),
VOLT_DATA_DEFINE(0, 0, 0, 0),
};
#define OMAP4460_VDD_CORE_OPP50_UV 1025000
#define OMAP4460_VDD_CORE_OPP100_UV 1200000
#define OMAP4460_VDD_CORE_OPP100_OV_UV 1250000
struct omap_volt_data omap446x_vdd_core_volt_data[] = {
VOLT_DATA_DEFINE(OMAP4460_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP4460_VDD_CORE_OPP100_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16),
VOLT_DATA_DEFINE(OMAP4460_VDD_CORE_OPP100_OV_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100OV, 0xf9, 0x16),
VOLT_DATA_DEFINE(0, 0, 0, 0),
};
static struct omap_opp_def __initdata omap446x_opp_def_list[] = {
/* MPU OPP1 - OPP50 */
OPP_INITIALIZER("mpu", true, 350000000, OMAP4460_VDD_MPU_OPP50_UV),
/* MPU OPP2 - OPP100 */
OPP_INITIALIZER("mpu", true, 700000000, OMAP4460_VDD_MPU_OPP100_UV),
/* MPU OPP3 - OPP-Turbo */
OPP_INITIALIZER("mpu", true, 920000000, OMAP4460_VDD_MPU_OPPTURBO_UV),
/*
* MPU OPP4 - OPP-Nitro + Disabled as the reference schematics
* recommends TPS623631 - confirm and enable the opp in board file
* XXX: May be we should enable these based on mpu capability and
* Exception board files disable it...
*/
OPP_INITIALIZER("mpu", false, 1200000000, OMAP4460_VDD_MPU_OPPNITRO_UV),
/* MPU OPP4 - OPP-Nitro SpeedBin */
OPP_INITIALIZER("mpu", false, 1500000000, OMAP4460_VDD_MPU_OPPNITRO_UV),
/* L3 OPP1 - OPP50 */
OPP_INITIALIZER("l3_main_1", true, 100000000, OMAP4460_VDD_CORE_OPP50_UV),
/* L3 OPP2 - OPP100 */
OPP_INITIALIZER("l3_main_1", true, 200000000, OMAP4460_VDD_CORE_OPP100_UV),
/* IVA OPP1 - OPP50 */
OPP_INITIALIZER("iva", true, 133000000, OMAP4460_VDD_IVA_OPP50_UV),
/* IVA OPP2 - OPP100 */
OPP_INITIALIZER("iva", true, 266100000, OMAP4460_VDD_IVA_OPP100_UV),
/*
* IVA OPP3 - OPP-Turbo + Disabled as the reference schematics
* recommends Phoenix VCORE2 which can supply only 600mA - so the ones
* above this OPP frequency, even though OMAP is capable, should be
* enabled by board file which is sure of the chip power capability
*/
OPP_INITIALIZER("iva", false, 332000000, OMAP4460_VDD_IVA_OPPTURBO_UV),
/* IVA OPP4 - OPP-Nitro */
OPP_INITIALIZER("iva", false, 430000000, OMAP4460_VDD_IVA_OPPNITRO_UV),
/* IVA OPP5 - OPP-Nitro SpeedBin*/
OPP_INITIALIZER("iva", false, 500000000, OMAP4460_VDD_IVA_OPPNITRO_UV),
/* TODO: add DSP, aess, fdif, gpu */
};
/**
* omap4_opp_init() - initialize omap4 opp table
*/
@ -93,12 +169,12 @@ int __init omap4_opp_init(void)
{
int r = -ENODEV;
if (!cpu_is_omap443x())
return r;
r = omap_init_opp_table(omap44xx_opp_def_list,
ARRAY_SIZE(omap44xx_opp_def_list));
if (cpu_is_omap443x())
r = omap_init_opp_table(omap443x_opp_def_list,
ARRAY_SIZE(omap443x_opp_def_list));
else if (cpu_is_omap446x())
r = omap_init_opp_table(omap446x_opp_def_list,
ARRAY_SIZE(omap446x_opp_def_list));
return r;
}
device_initcall(omap4_opp_init);

View File

@ -40,6 +40,38 @@ static struct omap_device_pm_latency *pm_lats;
*/
int (*omap_pm_suspend)(void);
#ifdef CONFIG_PM
/**
* struct omap2_oscillator - Describe the board main oscillator latencies
* @startup_time: oscillator startup latency
* @shutdown_time: oscillator shutdown latency
*/
struct omap2_oscillator {
u32 startup_time;
u32 shutdown_time;
};
static struct omap2_oscillator oscillator = {
.startup_time = ULONG_MAX,
.shutdown_time = ULONG_MAX,
};
void omap_pm_setup_oscillator(u32 tstart, u32 tshut)
{
oscillator.startup_time = tstart;
oscillator.shutdown_time = tshut;
}
void omap_pm_get_oscillator(u32 *tstart, u32 *tshut)
{
if (!tstart || !tshut)
return;
*tstart = oscillator.startup_time;
*tshut = oscillator.shutdown_time;
}
#endif
static int __init _init_omap_device(char *name)
{
struct omap_hwmod *oh;

View File

@ -138,4 +138,14 @@ static inline int omap4_twl_init(void)
}
#endif
#ifdef CONFIG_PM
extern void omap_pm_setup_oscillator(u32 tstart, u32 tshut);
extern void omap_pm_get_oscillator(u32 *tstart, u32 *tshut);
extern void omap_pm_setup_sr_i2c_pcb_length(u32 mm);
#else
static inline void omap_pm_setup_oscillator(u32 tstart, u32 tshut) { }
static inline void omap_pm_get_oscillator(u32 *tstart, u32 *tshut) { *tstart = *tshut = 0; }
static inline void omap_pm_setup_sr_i2c_pcb_length(u32 mm) { }
#endif
#endif

View File

@ -25,7 +25,7 @@
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/irq.h>
#include <linux/time.h>
#include <linux/gpio.h>
@ -38,7 +38,7 @@
#include <asm/mach-types.h>
#include <asm/system_misc.h>
#include <plat-omap/dma-omap.h>
#include <linux/omap-dma.h>
#include "soc.h"
#include "common.h"
@ -203,7 +203,7 @@ static int omap2_can_sleep(void)
{
if (omap2_fclks_active())
return 0;
if (osc_ck->usecount > 1)
if (__clk_is_enabled(osc_ck))
return 0;
if (omap_dma_running())
return 0;

View File

@ -28,6 +28,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/omap-dma.h>
#include <linux/platform_data/gpio-omap.h>
#include <trace/events/power.h>
@ -38,8 +39,6 @@
#include "clockdomain.h"
#include "powerdomain.h"
#include <plat-omap/dma-omap.h>
#include "soc.h"
#include "common.h"
#include "cm3xxx.h"

View File

@ -101,13 +101,6 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
if (!strncmp(pwrdm->name, "cpu", 3))
return 0;
/*
* FIXME: Remove this check when core retention is supported
* Only MPUSS power domain is added in the list.
*/
if (strcmp(pwrdm->name, "mpu_pwrdm"))
return 0;
pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
if (!pwrst)
return -ENOMEM;

View File

@ -107,12 +107,14 @@
#define OMAP2420_CLKOUT2_EN_MASK (1 << 15)
#define OMAP2420_CLKOUT2_DIV_SHIFT 11
#define OMAP2420_CLKOUT2_DIV_MASK (0x7 << 11)
#define OMAP2420_CLKOUT2_DIV_WIDTH 3
#define OMAP2420_CLKOUT2_SOURCE_SHIFT 8
#define OMAP2420_CLKOUT2_SOURCE_MASK (0x3 << 8)
#define OMAP24XX_CLKOUT_EN_SHIFT 7
#define OMAP24XX_CLKOUT_EN_MASK (1 << 7)
#define OMAP24XX_CLKOUT_DIV_SHIFT 3
#define OMAP24XX_CLKOUT_DIV_MASK (0x7 << 3)
#define OMAP24XX_CLKOUT_DIV_WIDTH 3
#define OMAP24XX_CLKOUT_SOURCE_SHIFT 0
#define OMAP24XX_CLKOUT_SOURCE_MASK (0x3 << 0)

View File

@ -384,6 +384,7 @@
/* PRM_CLKSEL */
#define OMAP3430_SYS_CLKIN_SEL_SHIFT 0
#define OMAP3430_SYS_CLKIN_SEL_MASK (0x7 << 0)
#define OMAP3430_SYS_CLKIN_SEL_WIDTH 3
/* PRM_CLKOUT_CTRL */
#define OMAP3430_CLKOUT_EN_MASK (1 << 7)

View File

@ -114,16 +114,25 @@ struct prm_reset_src_map {
/**
* struct prm_ll_data - fn ptrs to per-SoC PRM function implementations
* @read_reset_sources: ptr to the Soc PRM-specific get_reset_source impl
* @read_reset_sources: ptr to the SoC PRM-specific get_reset_source impl
* @was_any_context_lost_old: ptr to the SoC PRM context loss test fn
* @clear_context_loss_flags_old: ptr to the SoC PRM context loss flag clear fn
*
* XXX @was_any_context_lost_old and @clear_context_loss_flags_old are
* deprecated.
*/
struct prm_ll_data {
u32 (*read_reset_sources)(void);
bool (*was_any_context_lost_old)(u8 part, s16 inst, u16 idx);
void (*clear_context_loss_flags_old)(u8 part, s16 inst, u16 idx);
};
extern int prm_register(struct prm_ll_data *pld);
extern int prm_unregister(struct prm_ll_data *pld);
extern u32 prm_read_reset_sources(void);
extern bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx);
extern void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx);
#endif

View File

@ -118,14 +118,13 @@ static struct prm_ll_data omap2xxx_prm_ll_data = {
.read_reset_sources = &omap2xxx_prm_read_reset_sources,
};
static int __init omap2xxx_prm_init(void)
int __init omap2xxx_prm_init(void)
{
if (!cpu_is_omap24xx())
return 0;
return prm_register(&omap2xxx_prm_ll_data);
}
subsys_initcall(omap2xxx_prm_init);
static void __exit omap2xxx_prm_exit(void)
{

View File

@ -126,8 +126,7 @@ extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
extern void omap2xxx_prm_dpll_reset(void);
extern int __init prm2xxx_init(void);
extern int __exit prm2xxx_exit(void);
extern int __init omap2xxx_prm_init(void);
#endif

View File

@ -152,6 +152,7 @@ extern int omap2_clkdm_clear_all_wkdeps(struct clockdomain *clkdm);
/* Named PRCM_CLKSRC_CTRL on the 24XX */
#define OMAP_SYSCLKDIV_SHIFT 6
#define OMAP_SYSCLKDIV_MASK (0x3 << 6)
#define OMAP_SYSCLKDIV_WIDTH 2
#define OMAP_AUTOEXTCLKMODE_SHIFT 3
#define OMAP_AUTOEXTCLKMODE_MASK (0x3 << 3)
#define OMAP_SYSCLKSEL_SHIFT 0

View File

@ -383,27 +383,30 @@ static struct prm_ll_data omap3xxx_prm_ll_data = {
.read_reset_sources = &omap3xxx_prm_read_reset_sources,
};
static int __init omap3xxx_prm_init(void)
int __init omap3xxx_prm_init(void)
{
if (!cpu_is_omap34xx())
return 0;
return prm_register(&omap3xxx_prm_ll_data);
}
static int __init omap3xxx_prm_late_init(void)
{
int ret;
if (!cpu_is_omap34xx())
return 0;
ret = prm_register(&omap3xxx_prm_ll_data);
if (ret)
return ret;
omap3xxx_prm_enable_io_wakeup();
ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
if (!ret)
irq_set_status_flags(omap_prcm_event_to_irq("io"),
IRQ_NOAUTOEN);
return ret;
}
subsys_initcall(omap3xxx_prm_init);
subsys_initcall(omap3xxx_prm_late_init);
static void __exit omap3xxx_prm_exit(void)
{

View File

@ -154,6 +154,7 @@ extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
extern void omap3xxx_prm_dpll3_reset(void);
extern int __init omap3xxx_prm_init(void);
extern u32 omap3xxx_prm_get_reset_sources(void);
#endif /* __ASSEMBLER */

View File

@ -346,6 +346,37 @@ static u32 omap44xx_prm_read_reset_sources(void)
return r;
}
/**
* omap44xx_prm_was_any_context_lost_old - was module hardware context lost?
* @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION)
* @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST)
* @idx: CONTEXT register offset
*
* Return 1 if any bits were set in the *_CONTEXT_* register
* identified by (@part, @inst, @idx), which means that some context
* was lost for that module; otherwise, return 0.
*/
static bool omap44xx_prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx)
{
return (omap4_prminst_read_inst_reg(part, inst, idx)) ? 1 : 0;
}
/**
* omap44xx_prm_clear_context_lost_flags_old - clear context loss flags
* @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION)
* @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST)
* @idx: CONTEXT register offset
*
* Clear hardware context loss bits for the module identified by
* (@part, @inst, @idx). No return value. XXX Writes to reserved bits;
* is there a way to avoid this?
*/
static void omap44xx_prm_clear_context_loss_flags_old(u8 part, s16 inst,
u16 idx)
{
omap4_prminst_write_inst_reg(0xffffffff, part, inst, idx);
}
/* Powerdomain low-level functions */
static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
@ -613,24 +644,28 @@ struct pwrdm_ops omap4_pwrdm_operations = {
*/
static struct prm_ll_data omap44xx_prm_ll_data = {
.read_reset_sources = &omap44xx_prm_read_reset_sources,
.was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old,
.clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old,
};
static int __init omap44xx_prm_init(void)
int __init omap44xx_prm_init(void)
{
int ret;
if (!cpu_is_omap44xx())
return 0;
ret = prm_register(&omap44xx_prm_ll_data);
if (ret)
return ret;
return prm_register(&omap44xx_prm_ll_data);
}
static int __init omap44xx_prm_late_init(void)
{
if (!cpu_is_omap44xx())
return 0;
omap44xx_prm_enable_io_wakeup();
return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
}
subsys_initcall(omap44xx_prm_init);
subsys_initcall(omap44xx_prm_late_init);
static void __exit omap44xx_prm_exit(void)
{

View File

@ -771,6 +771,7 @@ extern void omap44xx_prm_ocp_barrier(void);
extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask);
extern void omap44xx_prm_restore_irqen(u32 *saved_mask);
extern int __init omap44xx_prm_init(void);
extern u32 omap44xx_prm_get_reset_sources(void);
# endif

View File

@ -364,6 +364,51 @@ u32 prm_read_reset_sources(void)
return ret;
}
/**
* prm_was_any_context_lost_old - was device context lost? (old API)
* @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION)
* @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST)
* @idx: CONTEXT register offset
*
* Return 1 if any bits were set in the *_CONTEXT_* register
* identified by (@part, @inst, @idx), which means that some context
* was lost for that module; otherwise, return 0. XXX Deprecated;
* callers need to use a less-SoC-dependent way to identify hardware
* IP blocks.
*/
bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx)
{
bool ret = true;
if (prm_ll_data->was_any_context_lost_old)
ret = prm_ll_data->was_any_context_lost_old(part, inst, idx);
else
WARN_ONCE(1, "prm: %s: no mapping function defined\n",
__func__);
return ret;
}
/**
* prm_clear_context_lost_flags_old - clear context loss flags (old API)
* @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION)
* @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST)
* @idx: CONTEXT register offset
*
* Clear hardware context loss bits for the module identified by
* (@part, @inst, @idx). No return value. XXX Deprecated; callers
* need to use a less-SoC-dependent way to identify hardware IP
* blocks.
*/
void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx)
{
if (prm_ll_data->clear_context_loss_flags_old)
prm_ll_data->clear_context_loss_flags_old(part, inst, idx);
else
WARN_ONCE(1, "prm: %s: no mapping function defined\n",
__func__);
}
/**
* prm_register - register per-SoC low-level data with the PRM
* @pld: low-level per-SoC OMAP PRM data & function pointers to register

View File

@ -127,12 +127,14 @@
/* AUXCLKREQ0 */
#define OMAP4_MAPPING_SHIFT 2
#define OMAP4_MAPPING_MASK (0x7 << 2)
#define OMAP4_MAPPING_WIDTH 3
#define OMAP4_ACCURACY_SHIFT 1
#define OMAP4_ACCURACY_MASK (1 << 1)
/* AUXCLK0 */
#define OMAP4_CLKDIV_SHIFT 16
#define OMAP4_CLKDIV_MASK (0xf << 16)
#define OMAP4_CLKDIV_WIDTH 4
#define OMAP4_DISABLECLK_SHIFT 9
#define OMAP4_DISABLECLK_MASK (1 << 9)
#define OMAP4_ENABLE_SHIFT 8

View File

@ -26,9 +26,9 @@
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/console.h>
#include <linux/omap-dma.h>
#include <plat/omap-serial.h>
#include <plat-omap/dma-omap.h>
#include "common.h"
#include "omap_hwmod.h"

View File

@ -121,6 +121,19 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
sr_data->senn_mod = 0x1;
sr_data->senp_mod = 0x1;
if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
sr_data->err_weight = OMAP3430_SR_ERRWEIGHT;
sr_data->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
sr_data->accum_data = OMAP3430_SR_ACCUMDATA;
if (!(strcmp(sr_data->name, "smartreflex_mpu"))) {
sr_data->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
sr_data->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
} else {
sr_data->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT;
sr_data->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT;
}
}
sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name);
if (!sr_data->voltdm) {
pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",

View File

@ -11,13 +11,20 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/bug.h>
#include <linux/io.h>
#include <asm/div64.h>
#include "iomap.h"
#include "soc.h"
#include "voltage.h"
#include "vc.h"
#include "prm-regbits-34xx.h"
#include "prm-regbits-44xx.h"
#include "prm44xx.h"
#include "pm.h"
#include "scrm44xx.h"
#include "control.h"
/**
* struct omap_vc_channel_cfg - describe the cfg_channel bitfield
@ -63,6 +70,9 @@ static struct omap_vc_channel_cfg vc_mutant_channel_cfg = {
};
static struct omap_vc_channel_cfg *vc_cfg_bits;
/* Default I2C trace length on pcb, 6.3cm. Used for capacitance calculations. */
static u32 sr_i2c_pcb_length = 63;
#define CFG_CHANNEL_MASK 0x1f
/**
@ -135,6 +145,8 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm,
vc_cmdval |= (*target_vsel << vc->common->cmd_on_shift);
voltdm->write(vc_cmdval, vc->cmdval_reg);
voltdm->vc_param->on = target_volt;
omap_vp_update_errorgain(voltdm, target_volt);
return 0;
@ -202,46 +214,389 @@ int omap_vc_bypass_scale(struct voltagedomain *voltdm,
return 0;
}
static void __init omap3_vfsm_init(struct voltagedomain *voltdm)
/* Convert microsecond value to number of 32kHz clock cycles */
static inline u32 omap_usec_to_32k(u32 usec)
{
return DIV_ROUND_UP_ULL(32768ULL * (u64)usec, 1000000ULL);
}
/* Set oscillator setup time for omap3 */
static void omap3_set_clksetup(u32 usec, struct voltagedomain *voltdm)
{
voltdm->write(omap_usec_to_32k(usec), OMAP3_PRM_CLKSETUP_OFFSET);
}
/**
* omap3_set_i2c_timings - sets i2c sleep timings for a channel
* @voltdm: channel to configure
* @off_mode: select whether retention or off mode values used
*
* Calculates and sets up voltage controller to use I2C based
* voltage scaling for sleep modes. This can be used for either off mode
* or retention. Off mode has additionally an option to use sys_off_mode
* pad, which uses a global signal to program the whole power IC to
* off-mode.
*/
static void omap3_set_i2c_timings(struct voltagedomain *voltdm, bool off_mode)
{
unsigned long voltsetup1;
u32 tgt_volt;
/*
* Voltage Manager FSM parameters init
* XXX This data should be passed in from the board file
* Oscillator is shut down only if we are using sys_off_mode pad,
* thus we set a minimal setup time here
*/
voltdm->write(OMAP3_CLKSETUP, OMAP3_PRM_CLKSETUP_OFFSET);
voltdm->write(OMAP3_VOLTOFFSET, OMAP3_PRM_VOLTOFFSET_OFFSET);
voltdm->write(OMAP3_VOLTSETUP2, OMAP3_PRM_VOLTSETUP2_OFFSET);
omap3_set_clksetup(1, voltdm);
if (off_mode)
tgt_volt = voltdm->vc_param->off;
else
tgt_volt = voltdm->vc_param->ret;
voltsetup1 = (voltdm->vc_param->on - tgt_volt) /
voltdm->pmic->slew_rate;
voltsetup1 = voltsetup1 * voltdm->sys_clk.rate / 8 / 1000000 + 1;
voltdm->rmw(voltdm->vfsm->voltsetup_mask,
voltsetup1 << __ffs(voltdm->vfsm->voltsetup_mask),
voltdm->vfsm->voltsetup_reg);
/*
* pmic is not controlling the voltage scaling during retention,
* thus set voltsetup2 to 0
*/
voltdm->write(0, OMAP3_PRM_VOLTSETUP2_OFFSET);
}
/**
* omap3_set_off_timings - sets off-mode timings for a channel
* @voltdm: channel to configure
*
* Calculates and sets up off-mode timings for a channel. Off-mode
* can use either I2C based voltage scaling, or alternatively
* sys_off_mode pad can be used to send a global command to power IC.
* This function first checks which mode is being used, and calls
* omap3_set_i2c_timings() if the system is using I2C control mode.
* sys_off_mode has the additional benefit that voltages can be
* scaled to zero volt level with TWL4030 / TWL5030, I2C can only
* scale to 600mV.
*/
static void omap3_set_off_timings(struct voltagedomain *voltdm)
{
unsigned long clksetup;
unsigned long voltsetup2;
unsigned long voltsetup2_old;
u32 val;
u32 tstart, tshut;
/* check if sys_off_mode is used to control off-mode voltages */
val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
if (!(val & OMAP3430_SEL_OFF_MASK)) {
/* No, omap is controlling them over I2C */
omap3_set_i2c_timings(voltdm, true);
return;
}
omap_pm_get_oscillator(&tstart, &tshut);
omap3_set_clksetup(tstart, voltdm);
clksetup = voltdm->read(OMAP3_PRM_CLKSETUP_OFFSET);
/* voltsetup 2 in us */
voltsetup2 = voltdm->vc_param->on / voltdm->pmic->slew_rate;
/* convert to 32k clk cycles */
voltsetup2 = DIV_ROUND_UP(voltsetup2 * 32768, 1000000);
voltsetup2_old = voltdm->read(OMAP3_PRM_VOLTSETUP2_OFFSET);
/*
* Update voltsetup2 if higher than current value (needed because
* we have multiple channels with different ramp times), also
* update voltoffset always to value recommended by TRM
*/
if (voltsetup2 > voltsetup2_old) {
voltdm->write(voltsetup2, OMAP3_PRM_VOLTSETUP2_OFFSET);
voltdm->write(clksetup - voltsetup2,
OMAP3_PRM_VOLTOFFSET_OFFSET);
} else
voltdm->write(clksetup - voltsetup2_old,
OMAP3_PRM_VOLTOFFSET_OFFSET);
/*
* omap is not controlling voltage scaling during off-mode,
* thus set voltsetup1 to 0
*/
voltdm->rmw(voltdm->vfsm->voltsetup_mask, 0,
voltdm->vfsm->voltsetup_reg);
/* voltoffset must be clksetup minus voltsetup2 according to TRM */
voltdm->write(clksetup - voltsetup2, OMAP3_PRM_VOLTOFFSET_OFFSET);
}
static void __init omap3_vc_init_channel(struct voltagedomain *voltdm)
{
static bool is_initialized;
if (is_initialized)
return;
omap3_vfsm_init(voltdm);
is_initialized = true;
omap3_set_off_timings(voltdm);
}
/**
* omap4_calc_volt_ramp - calculates voltage ramping delays on omap4
* @voltdm: channel to calculate values for
* @voltage_diff: voltage difference in microvolts
*
* Calculates voltage ramp prescaler + counter values for a voltage
* difference on omap4. Returns a field value suitable for writing to
* VOLTSETUP register for a channel in following format:
* bits[8:9] prescaler ... bits[0:5] counter. See OMAP4 TRM for reference.
*/
static u32 omap4_calc_volt_ramp(struct voltagedomain *voltdm, u32 voltage_diff)
{
u32 prescaler;
u32 cycles;
u32 time;
time = voltage_diff / voltdm->pmic->slew_rate;
cycles = voltdm->sys_clk.rate / 1000 * time / 1000;
cycles /= 64;
prescaler = 0;
/* shift to next prescaler until no overflow */
/* scale for div 256 = 64 * 4 */
if (cycles > 63) {
cycles /= 4;
prescaler++;
}
/* scale for div 512 = 256 * 2 */
if (cycles > 63) {
cycles /= 2;
prescaler++;
}
/* scale for div 2048 = 512 * 4 */
if (cycles > 63) {
cycles /= 4;
prescaler++;
}
/* check for overflow => invalid ramp time */
if (cycles > 63) {
pr_warn("%s: invalid setuptime for vdd_%s\n", __func__,
voltdm->name);
return 0;
}
cycles++;
return (prescaler << OMAP4430_RAMP_UP_PRESCAL_SHIFT) |
(cycles << OMAP4430_RAMP_UP_COUNT_SHIFT);
}
/**
* omap4_usec_to_val_scrm - convert microsecond value to SCRM module bitfield
* @usec: microseconds
* @shift: number of bits to shift left
* @mask: bitfield mask
*
* Converts microsecond value to OMAP4 SCRM bitfield. Bitfield is
* shifted to requested position, and checked agains the mask value.
* If larger, forced to the max value of the field (i.e. the mask itself.)
* Returns the SCRM bitfield value.
*/
static u32 omap4_usec_to_val_scrm(u32 usec, int shift, u32 mask)
{
u32 val;
val = omap_usec_to_32k(usec) << shift;
/* Check for overflow, if yes, force to max value */
if (val > mask)
val = mask;
return val;
}
/**
* omap4_set_timings - set voltage ramp timings for a channel
* @voltdm: channel to configure
* @off_mode: whether off-mode values are used
*
* Calculates and sets the voltage ramp up / down values for a channel.
*/
static void omap4_set_timings(struct voltagedomain *voltdm, bool off_mode)
{
u32 val;
u32 ramp;
int offset;
u32 tstart, tshut;
if (off_mode) {
ramp = omap4_calc_volt_ramp(voltdm,
voltdm->vc_param->on - voltdm->vc_param->off);
offset = voltdm->vfsm->voltsetup_off_reg;
} else {
ramp = omap4_calc_volt_ramp(voltdm,
voltdm->vc_param->on - voltdm->vc_param->ret);
offset = voltdm->vfsm->voltsetup_reg;
}
if (!ramp)
return;
val = voltdm->read(offset);
val |= ramp << OMAP4430_RAMP_DOWN_COUNT_SHIFT;
val |= ramp << OMAP4430_RAMP_UP_COUNT_SHIFT;
voltdm->write(val, offset);
omap_pm_get_oscillator(&tstart, &tshut);
val = omap4_usec_to_val_scrm(tstart, OMAP4_SETUPTIME_SHIFT,
OMAP4_SETUPTIME_MASK);
val |= omap4_usec_to_val_scrm(tshut, OMAP4_DOWNTIME_SHIFT,
OMAP4_DOWNTIME_MASK);
__raw_writel(val, OMAP4_SCRM_CLKSETUPTIME);
}
/* OMAP4 specific voltage init functions */
static void __init omap4_vc_init_channel(struct voltagedomain *voltdm)
{
static bool is_initialized;
u32 vc_val;
if (is_initialized)
return;
/* XXX These are magic numbers and do not belong! */
vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
voltdm->write(vc_val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
is_initialized = true;
omap4_set_timings(voltdm, true);
omap4_set_timings(voltdm, false);
}
struct i2c_init_data {
u8 loadbits;
u8 load;
u8 hsscll_38_4;
u8 hsscll_26;
u8 hsscll_19_2;
u8 hsscll_16_8;
u8 hsscll_12;
};
static const __initdata struct i2c_init_data omap4_i2c_timing_data[] = {
{
.load = 50,
.loadbits = 0x3,
.hsscll_38_4 = 13,
.hsscll_26 = 11,
.hsscll_19_2 = 9,
.hsscll_16_8 = 9,
.hsscll_12 = 8,
},
{
.load = 25,
.loadbits = 0x2,
.hsscll_38_4 = 13,
.hsscll_26 = 11,
.hsscll_19_2 = 9,
.hsscll_16_8 = 9,
.hsscll_12 = 8,
},
{
.load = 12,
.loadbits = 0x1,
.hsscll_38_4 = 11,
.hsscll_26 = 10,
.hsscll_19_2 = 9,
.hsscll_16_8 = 9,
.hsscll_12 = 8,
},
{
.load = 0,
.loadbits = 0x0,
.hsscll_38_4 = 12,
.hsscll_26 = 10,
.hsscll_19_2 = 9,
.hsscll_16_8 = 8,
.hsscll_12 = 8,
},
};
/**
* omap4_vc_i2c_timing_init - sets up board I2C timing parameters
* @voltdm: voltagedomain pointer to get data from
*
* Use PMIC + board supplied settings for calculating the total I2C
* channel capacitance and set the timing parameters based on this.
* Pre-calculated values are provided in data tables, as it is not
* too straightforward to calculate these runtime.
*/
static void __init omap4_vc_i2c_timing_init(struct voltagedomain *voltdm)
{
u32 capacitance;
u32 val;
u16 hsscll;
const struct i2c_init_data *i2c_data;
if (!voltdm->pmic->i2c_high_speed) {
pr_warn("%s: only high speed supported!\n", __func__);
return;
}
/* PCB trace capacitance, 0.125pF / mm => mm / 8 */
capacitance = DIV_ROUND_UP(sr_i2c_pcb_length, 8);
/* OMAP pad capacitance */
capacitance += 4;
/* PMIC pad capacitance */
capacitance += voltdm->pmic->i2c_pad_load;
/* Search for capacitance match in the table */
i2c_data = omap4_i2c_timing_data;
while (i2c_data->load > capacitance)
i2c_data++;
/* Select proper values based on sysclk frequency */
switch (voltdm->sys_clk.rate) {
case 38400000:
hsscll = i2c_data->hsscll_38_4;
break;
case 26000000:
hsscll = i2c_data->hsscll_26;
break;
case 19200000:
hsscll = i2c_data->hsscll_19_2;
break;
case 16800000:
hsscll = i2c_data->hsscll_16_8;
break;
case 12000000:
hsscll = i2c_data->hsscll_12;
break;
default:
pr_warn("%s: unsupported sysclk rate: %d!\n", __func__,
voltdm->sys_clk.rate);
return;
}
/* Loadbits define pull setup for the I2C channels */
val = i2c_data->loadbits << 25 | i2c_data->loadbits << 29;
/* Write to SYSCTRL_PADCONF_WKUP_CTRL_I2C_2 to setup I2C pull */
__raw_writel(val, OMAP2_L4_IO_ADDRESS(OMAP4_CTRL_MODULE_PAD_WKUP +
OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2));
/* HSSCLH can always be zero */
val = hsscll << OMAP4430_HSSCLL_SHIFT;
val |= (0x28 << OMAP4430_SCLL_SHIFT | 0x2c << OMAP4430_SCLH_SHIFT);
/* Write setup times to I2C config register */
voltdm->write(val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
}
/**
* omap_vc_i2c_init - initialize I2C interface to PMIC
* @voltdm: voltage domain containing VC data
@ -281,9 +636,51 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
mcode << __ffs(vc->common->i2c_mcode_mask),
vc->common->i2c_cfg_reg);
if (cpu_is_omap44xx())
omap4_vc_i2c_timing_init(voltdm);
initialized = true;
}
/**
* omap_vc_calc_vsel - calculate vsel value for a channel
* @voltdm: channel to calculate value for
* @uvolt: microvolt value to convert to vsel
*
* Converts a microvolt value to vsel value for the used PMIC.
* This checks whether the microvolt value is out of bounds, and
* adjusts the value accordingly. If unsupported value detected,
* warning is thrown.
*/
static u8 omap_vc_calc_vsel(struct voltagedomain *voltdm, u32 uvolt)
{
if (voltdm->pmic->vddmin > uvolt)
uvolt = voltdm->pmic->vddmin;
if (voltdm->pmic->vddmax < uvolt) {
WARN(1, "%s: voltage not supported by pmic: %u vs max %u\n",
__func__, uvolt, voltdm->pmic->vddmax);
/* Lets try maximum value anyway */
uvolt = voltdm->pmic->vddmax;
}
return voltdm->pmic->uv_to_vsel(uvolt);
}
#ifdef CONFIG_PM
/**
* omap_pm_setup_sr_i2c_pcb_length - set length of SR I2C traces on PCB
* @mm: length of the PCB trace in millimetres
*
* Sets the PCB trace length for the I2C channel. By default uses 63mm.
* This is needed for properly calculating the capacitance value for
* the PCB trace, and for setting the SR I2C channel timing parameters.
*/
void __init omap_pm_setup_sr_i2c_pcb_length(u32 mm)
{
sr_i2c_pcb_length = mm;
}
#endif
void __init omap_vc_init_channel(struct voltagedomain *voltdm)
{
struct omap_vc_channel *vc = voltdm->vc;
@ -311,7 +708,6 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
vc->i2c_slave_addr = voltdm->pmic->i2c_slave_addr;
vc->volt_reg_addr = voltdm->pmic->volt_reg_addr;
vc->cmd_reg_addr = voltdm->pmic->cmd_reg_addr;
vc->setup_time = voltdm->pmic->volt_setup_time;
/* Configure the i2c slave address for this VC */
voltdm->rmw(vc->smps_sa_mask,
@ -331,14 +727,18 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
voltdm->rmw(vc->smps_cmdra_mask,
vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask),
vc->smps_cmdra_reg);
vc->cfg_channel |= vc_cfg_bits->rac | vc_cfg_bits->racen;
vc->cfg_channel |= vc_cfg_bits->rac;
}
if (vc->cmd_reg_addr == vc->volt_reg_addr)
vc->cfg_channel |= vc_cfg_bits->racen;
/* Set up the on, inactive, retention and off voltage */
on_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->on_volt);
onlp_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->onlp_volt);
ret_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->ret_volt);
off_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->off_volt);
on_vsel = omap_vc_calc_vsel(voltdm, voltdm->vc_param->on);
onlp_vsel = omap_vc_calc_vsel(voltdm, voltdm->vc_param->onlp);
ret_vsel = omap_vc_calc_vsel(voltdm, voltdm->vc_param->ret);
off_vsel = omap_vc_calc_vsel(voltdm, voltdm->vc_param->off);
val = ((on_vsel << vc->common->cmd_on_shift) |
(onlp_vsel << vc->common->cmd_onlp_shift) |
(ret_vsel << vc->common->cmd_ret_shift) |
@ -349,11 +749,6 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
/* Channel configuration */
omap_vc_config_channel(voltdm);
/* Configure the setup times */
voltdm->rmw(voltdm->vfsm->voltsetup_mask,
vc->setup_time << __ffs(voltdm->vfsm->voltsetup_mask),
voltdm->vfsm->voltsetup_reg);
omap_vc_i2c_init(voltdm);
if (cpu_is_omap34xx())

View File

@ -86,7 +86,6 @@ struct omap_vc_channel {
u16 i2c_slave_addr;
u16 volt_reg_addr;
u16 cmd_reg_addr;
u16 setup_time;
u8 cfg_channel;
bool i2c_high_speed;
@ -111,6 +110,13 @@ extern struct omap_vc_channel omap4_vc_mpu;
extern struct omap_vc_channel omap4_vc_iva;
extern struct omap_vc_channel omap4_vc_core;
extern struct omap_vc_param omap3_mpu_vc_data;
extern struct omap_vc_param omap3_core_vc_data;
extern struct omap_vc_param omap4_mpu_vc_data;
extern struct omap_vc_param omap4_iva_vc_data;
extern struct omap_vc_param omap4_core_vc_data;
void omap_vc_init_channel(struct voltagedomain *voltdm);
int omap_vc_pre_scale(struct voltagedomain *voltdm,
unsigned long target_volt,

View File

@ -71,3 +71,25 @@ struct omap_vc_channel omap3_vc_core = {
.smps_cmdra_mask = OMAP3430_CMDRA1_MASK,
.cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT,
};
/*
* Voltage levels for different operating modes: on, sleep, retention and off
*/
#define OMAP3_ON_VOLTAGE_UV 1200000
#define OMAP3_ONLP_VOLTAGE_UV 1000000
#define OMAP3_RET_VOLTAGE_UV 975000
#define OMAP3_OFF_VOLTAGE_UV 600000
struct omap_vc_param omap3_mpu_vc_data = {
.on = OMAP3_ON_VOLTAGE_UV,
.onlp = OMAP3_ONLP_VOLTAGE_UV,
.ret = OMAP3_RET_VOLTAGE_UV,
.off = OMAP3_OFF_VOLTAGE_UV,
};
struct omap_vc_param omap3_core_vc_data = {
.on = OMAP3_ON_VOLTAGE_UV,
.onlp = OMAP3_ONLP_VOLTAGE_UV,
.ret = OMAP3_RET_VOLTAGE_UV,
.off = OMAP3_OFF_VOLTAGE_UV,
};

View File

@ -87,3 +87,31 @@ struct omap_vc_channel omap4_vc_core = {
.cfg_channel_sa_shift = OMAP4430_SA_VDD_CORE_L_SHIFT,
};
/*
* Voltage levels for different operating modes: on, sleep, retention and off
*/
#define OMAP4_ON_VOLTAGE_UV 1375000
#define OMAP4_ONLP_VOLTAGE_UV 1375000
#define OMAP4_RET_VOLTAGE_UV 837500
#define OMAP4_OFF_VOLTAGE_UV 0
struct omap_vc_param omap4_mpu_vc_data = {
.on = OMAP4_ON_VOLTAGE_UV,
.onlp = OMAP4_ONLP_VOLTAGE_UV,
.ret = OMAP4_RET_VOLTAGE_UV,
.off = OMAP4_OFF_VOLTAGE_UV,
};
struct omap_vc_param omap4_iva_vc_data = {
.on = OMAP4_ON_VOLTAGE_UV,
.onlp = OMAP4_ONLP_VOLTAGE_UV,
.ret = OMAP4_RET_VOLTAGE_UV,
.off = OMAP4_OFF_VOLTAGE_UV,
};
struct omap_vc_param omap4_core_vc_data = {
.on = OMAP4_ON_VOLTAGE_UV,
.onlp = OMAP4_ONLP_VOLTAGE_UV,
.ret = OMAP4_RET_VOLTAGE_UV,
.off = OMAP4_OFF_VOLTAGE_UV,
};

Some files were not shown because too many files have changed in this diff Show More