diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index afa9c03ecfd6..7f6887535c1e 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -85,6 +85,7 @@ struct xgene_ahci_context {
 	struct ahci_host_priv *hpriv;
 	struct device *dev;
 	u8 last_cmd[MAX_AHCI_CHN_PERCTR]; /* tracking the last command issued*/
+	u32 class[MAX_AHCI_CHN_PERCTR]; /* tracking the class of device */
 	void __iomem *csr_core;		/* Core CSR address of IP */
 	void __iomem *csr_diag;		/* Diag CSR address of IP */
 	void __iomem *csr_axi;		/* AXI CSR address of IP */
@@ -177,11 +178,17 @@ static int xgene_ahci_restart_engine(struct ata_port *ap)
  * xgene_ahci_qc_issue - Issue commands to the device
  * @qc: Command to issue
  *
- * Due to Hardware errata for IDENTIFY DEVICE command and PACKET
- * command of ATAPI protocol set, the controller cannot clear the BSY bit
- * after receiving the PIO setup FIS. This results in the DMA state machine
- * going into the CMFatalErrorUpdate state and locks up. By restarting the
- * DMA engine, it removes the controller out of lock up state.
+ * Due to Hardware errata for IDENTIFY DEVICE command, the controller cannot
+ * clear the BSY bit after receiving the PIO setup FIS. This results in the dma
+ * state machine goes into the CMFatalErrorUpdate state and locks up. By
+ * restarting the dma engine, it removes the controller out of lock up state.
+ *
+ * Due to H/W errata, the controller is unable to save the PMP
+ * field fetched from command header before sending the H2D FIS.
+ * When the device returns the PMP port field in the D2H FIS, there is
+ * a mismatch and results in command completion failure. The
+ * workaround is to write the pmp value to PxFBS.DEV field before issuing
+ * any command to PMP.
  */
 static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
 {
@@ -189,6 +196,19 @@ static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
 	struct ahci_host_priv *hpriv = ap->host->private_data;
 	struct xgene_ahci_context *ctx = hpriv->plat_data;
 	int rc = 0;
+	u32 port_fbs;
+	void *port_mmio = ahci_port_base(ap);
+
+	/*
+	 * Write the pmp value to PxFBS.DEV
+	 * for case of Port Mulitplier.
+	 */
+	if (ctx->class[ap->port_no] == ATA_DEV_PMP) {
+		port_fbs = readl(port_mmio + PORT_FBS);
+		port_fbs &= ~PORT_FBS_DEV_MASK;
+		port_fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET;
+		writel(port_fbs, port_mmio + PORT_FBS);
+	}
 
 	if (unlikely((ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA) ||
 	    (ctx->last_cmd[ap->port_no] == ATA_CMD_PACKET)))
@@ -417,12 +437,115 @@ static void xgene_ahci_host_stop(struct ata_host *host)
 	ahci_platform_disable_resources(hpriv);
 }
 
+/**
+ * xgene_ahci_pmp_softreset - Issue the softreset to the drives connected
+ *                            to Port Multiplier.
+ * @link: link to reset
+ * @class: Return value to indicate class of device
+ * @deadline: deadline jiffies for the operation
+ *
+ * Due to H/W errata, the controller is unable to save the PMP
+ * field fetched from command header before sending the H2D FIS.
+ * When the device returns the PMP port field in the D2H FIS, there is
+ * a mismatch and results in command completion failure. The workaround
+ * is to write the pmp value to PxFBS.DEV field before issuing any command
+ * to PMP.
+ */
+static int xgene_ahci_pmp_softreset(struct ata_link *link, unsigned int *class,
+			  unsigned long deadline)
+{
+	int pmp = sata_srst_pmp(link);
+	struct ata_port *ap = link->ap;
+	u32 rc;
+	void *port_mmio = ahci_port_base(ap);
+	u32 port_fbs;
+
+	/*
+	 * Set PxFBS.DEV field with pmp
+	 * value.
+	 */
+	port_fbs = readl(port_mmio + PORT_FBS);
+	port_fbs &= ~PORT_FBS_DEV_MASK;
+	port_fbs |= pmp << PORT_FBS_DEV_OFFSET;
+	writel(port_fbs, port_mmio + PORT_FBS);
+
+	rc = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
+
+	return rc;
+}
+
+/**
+ * xgene_ahci_softreset - Issue the softreset to the drive.
+ * @link: link to reset
+ * @class: Return value to indicate class of device
+ * @deadline: deadline jiffies for the operation
+ *
+ * Due to H/W errata, the controller is unable to save the PMP
+ * field fetched from command header before sending the H2D FIS.
+ * When the device returns the PMP port field in the D2H FIS, there is
+ * a mismatch and results in command completion failure. The workaround
+ * is to write the pmp value to PxFBS.DEV field before issuing any command
+ * to PMP. Here is the algorithm to detect PMP :
+ *
+ * 1. Save the PxFBS value
+ * 2. Program PxFBS.DEV with pmp value send by framework. Framework sends
+ *    0xF for both PMP/NON-PMP initially
+ * 3. Issue softreset
+ * 4. If signature class is PMP goto 6
+ * 5. restore the original PxFBS and goto 3
+ * 6. return
+ */
+static int xgene_ahci_softreset(struct ata_link *link, unsigned int *class,
+			  unsigned long deadline)
+{
+	int pmp = sata_srst_pmp(link);
+	struct ata_port *ap = link->ap;
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	struct xgene_ahci_context *ctx = hpriv->plat_data;
+	void *port_mmio = ahci_port_base(ap);
+	u32 port_fbs;
+	u32 port_fbs_save;
+	u32 retry = 1;
+	u32 rc;
+
+	port_fbs_save = readl(port_mmio + PORT_FBS);
+
+	/*
+	 * Set PxFBS.DEV field with pmp
+	 * value.
+	 */
+	port_fbs = readl(port_mmio + PORT_FBS);
+	port_fbs &= ~PORT_FBS_DEV_MASK;
+	port_fbs |= pmp << PORT_FBS_DEV_OFFSET;
+	writel(port_fbs, port_mmio + PORT_FBS);
+
+softreset_retry:
+	rc = ahci_do_softreset(link, class, pmp,
+			       deadline, ahci_check_ready);
+
+	ctx->class[ap->port_no] = *class;
+	if (*class != ATA_DEV_PMP) {
+		/*
+		 * Retry for normal drives without
+		 * setting PxFBS.DEV field with pmp value.
+		 */
+		if (retry--) {
+			writel(port_fbs_save, port_mmio + PORT_FBS);
+			goto softreset_retry;
+		}
+	}
+
+	return rc;
+}
+
 static struct ata_port_operations xgene_ahci_ops = {
 	.inherits = &ahci_ops,
 	.host_stop = xgene_ahci_host_stop,
 	.hardreset = xgene_ahci_hardreset,
 	.read_id = xgene_ahci_read_id,
 	.qc_issue = xgene_ahci_qc_issue,
+	.softreset = xgene_ahci_softreset,
+	.pmp_softreset = xgene_ahci_pmp_softreset
 };
 
 static const struct ata_port_info xgene_ahci_port_info = {