mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-09-26 04:16:39 +00:00
Code Issues Releases Wiki Activity

gpio: 74x164: Enable output pins after registers are reset

Browse source 
[ Upstream commit 530b1dbd97 ]

Chip outputs are enabled[1] before actual reset is performed[2] which might
cause pin output value to flip flop if previous pin value was set to 1.
Fix that behavior by making sure chip is fully reset before all outputs are
enabled.

Flip-flop can be noticed when module is removed and inserted again and one of
the pins was changed to 1 before removal. 100 microsecond flipping is
noticeable on oscilloscope (100khz SPI bus).

For a properly reset chip - output is enabled around 100 microseconds (on 100khz
SPI bus) later during probing process hence should be irrelevant behavioral
change.

Fixes: 7ebc194d0f (gpio: 74x164: Introduce 'enable-gpios' property)
Link: https://elixir.bootlin.com/linux/v6.7.4/source/drivers/gpio/gpio-74x164.c#L130 [1]
Link: https://elixir.bootlin.com/linux/v6.7.4/source/drivers/gpio/gpio-74x164.c#L150 [2]
Signed-off-by: Arturas Moskvinas <arturas.moskvinas@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Arturas Moskvinas 2024-03-01 09:12:04 +02:00 committed by Greg Kroah-Hartman
parent 7eb95e0af5
commit a3d369aeb3
1 changed files with 2 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
drivers/gpio/gpio-74x164.c
View file

@ -127,8 +127,6 @@ static int gen_74x164_probe(struct spi_device *spi)
if (IS_ERR(chip->gpiod_oe))
return PTR_ERR(chip->gpiod_oe);
gpiod_set_value_cansleep(chip->gpiod_oe, 1);
spi_set_drvdata(spi, chip);
chip->gpio_chip.label = spi->modalias;
@ -153,6 +151,8 @@ static int gen_74x164_probe(struct spi_device *spi)
goto exit_destroy;
}
gpiod_set_value_cansleep(chip->gpiod_oe, 1);
ret = gpiochip_add_data(&chip->gpio_chip, chip);
if (!ret)
return 0;