PM / Runtime: Use device type and device class callbacks

The power management of some devices is handled through device types
and device classes rather than through bus types.  Since these
devices may also benefit from using the run-time power management
core, extend it so that the device type and device class run-time PM
callbacks can be taken into consideration by it if the bus type
callback is not defined.

Update the run-time PM core documentation to reflect this change.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This commit is contained in:
Rafael J. Wysocki 2009-12-22 20:43:17 +01:00
parent aa0baaef97
commit a6ab7aa9f4
2 changed files with 126 additions and 80 deletions

View file

@ -42,80 +42,81 @@ struct dev_pm_ops {
...
};
The ->runtime_suspend() callback is executed by the PM core for the bus type of
the device being suspended. The bus type's callback is then _entirely_
_responsible_ for handling the device as appropriate, which may, but need not
include executing the device driver's own ->runtime_suspend() callback (from the
PM core's point of view it is not necessary to implement a ->runtime_suspend()
callback in a device driver as long as the bus type's ->runtime_suspend() knows
what to do to handle the device).
The ->runtime_suspend(), ->runtime_resume() and ->runtime_idle() callbacks are
executed by the PM core for either the bus type, or device type (if the bus
type's callback is not defined), or device class (if the bus type's and device
type's callbacks are not defined) of given device. The bus type, device type
and device class callbacks are referred to as subsystem-level callbacks in what
follows.
* Once the bus type's ->runtime_suspend() callback has completed successfully
The subsystem-level suspend callback is _entirely_ _responsible_ for handling
the suspend of the device as appropriate, which may, but need not include
executing the device driver's own ->runtime_suspend() callback (from the
PM core's point of view it is not necessary to implement a ->runtime_suspend()
callback in a device driver as long as the subsystem-level suspend callback
knows what to do to handle the device).
* Once the subsystem-level suspend callback has completed successfully
for given device, the PM core regards the device as suspended, which need
not mean that the device has been put into a low power state. It is
supposed to mean, however, that the device will not process data and will
not communicate with the CPU(s) and RAM until its bus type's
->runtime_resume() callback is executed for it. The run-time PM status of
a device after successful execution of its bus type's ->runtime_suspend()
callback is 'suspended'.
not communicate with the CPU(s) and RAM until the subsystem-level resume
callback is executed for it. The run-time PM status of a device after
successful execution of the subsystem-level suspend callback is 'suspended'.
* If the bus type's ->runtime_suspend() callback returns -EBUSY or -EAGAIN,
the device's run-time PM status is supposed to be 'active', which means that
the device _must_ be fully operational afterwards.
* If the subsystem-level suspend callback returns -EBUSY or -EAGAIN,
the device's run-time PM status is 'active', which means that the device
_must_ be fully operational afterwards.
* If the bus type's ->runtime_suspend() callback returns an error code
different from -EBUSY or -EAGAIN, the PM core regards this as a fatal
error and will refuse to run the helper functions described in Section 4
for the device, until the status of it is directly set either to 'active'
or to 'suspended' (the PM core provides special helper functions for this
purpose).
* If the subsystem-level suspend callback returns an error code different
from -EBUSY or -EAGAIN, the PM core regards this as a fatal error and will
refuse to run the helper functions described in Section 4 for the device,
until the status of it is directly set either to 'active', or to 'suspended'
(the PM core provides special helper functions for this purpose).
In particular, if the driver requires remote wakeup capability for proper
functioning and device_run_wake() returns 'false' for the device, then
->runtime_suspend() should return -EBUSY. On the other hand, if
device_run_wake() returns 'true' for the device and the device is put
into a low power state during the execution of its bus type's
->runtime_suspend(), it is expected that remote wake-up (i.e. hardware mechanism
allowing the device to request a change of its power state, such as PCI PME)
will be enabled for the device. Generally, remote wake-up should be enabled
for all input devices put into a low power state at run time.
In particular, if the driver requires remote wake-up capability (i.e. hardware
mechanism allowing the device to request a change of its power state, such as
PCI PME) for proper functioning and device_run_wake() returns 'false' for the
device, then ->runtime_suspend() should return -EBUSY. On the other hand, if
device_run_wake() returns 'true' for the device and the device is put into a low
power state during the execution of the subsystem-level suspend callback, it is
expected that remote wake-up will be enabled for the device. Generally, remote
wake-up should be enabled for all input devices put into a low power state at
run time.
The ->runtime_resume() callback is executed by the PM core for the bus type of
the device being woken up. The bus type's callback is then _entirely_
_responsible_ for handling the device as appropriate, which may, but need not
include executing the device driver's own ->runtime_resume() callback (from the
PM core's point of view it is not necessary to implement a ->runtime_resume()
callback in a device driver as long as the bus type's ->runtime_resume() knows
what to do to handle the device).
The subsystem-level resume callback is _entirely_ _responsible_ for handling the
resume of the device as appropriate, which may, but need not include executing
the device driver's own ->runtime_resume() callback (from the PM core's point of
view it is not necessary to implement a ->runtime_resume() callback in a device
driver as long as the subsystem-level resume callback knows what to do to handle
the device).
* Once the bus type's ->runtime_resume() callback has completed successfully,
the PM core regards the device as fully operational, which means that the
device _must_ be able to complete I/O operations as needed. The run-time
PM status of the device is then 'active'.
* Once the subsystem-level resume callback has completed successfully, the PM
core regards the device as fully operational, which means that the device
_must_ be able to complete I/O operations as needed. The run-time PM status
of the device is then 'active'.
* If the bus type's ->runtime_resume() callback returns an error code, the PM
core regards this as a fatal error and will refuse to run the helper
functions described in Section 4 for the device, until its status is
directly set either to 'active' or to 'suspended' (the PM core provides
special helper functions for this purpose).
* If the subsystem-level resume callback returns an error code, the PM core
regards this as a fatal error and will refuse to run the helper functions
described in Section 4 for the device, until its status is directly set
either to 'active' or to 'suspended' (the PM core provides special helper
functions for this purpose).
The ->runtime_idle() callback is executed by the PM core for the bus type of
given device whenever the device appears to be idle, which is indicated to the
PM core by two counters, the device's usage counter and the counter of 'active'
children of the device.
The subsystem-level idle callback is executed by the PM core whenever the device
appears to be idle, which is indicated to the PM core by two counters, the
device's usage counter and the counter of 'active' children of the device.
* If any of these counters is decreased using a helper function provided by
the PM core and it turns out to be equal to zero, the other counter is
checked. If that counter also is equal to zero, the PM core executes the
device bus type's ->runtime_idle() callback (with the device as an
argument).
subsystem-level idle callback with the device as an argument.
The action performed by a bus type's ->runtime_idle() callback is totally
dependent on the bus type in question, but the expected and recommended action
is to check if the device can be suspended (i.e. if all of the conditions
necessary for suspending the device are satisfied) and to queue up a suspend
request for the device in that case. The value returned by this callback is
ignored by the PM core.
The action performed by a subsystem-level idle callback is totally dependent on
the subsystem in question, but the expected and recommended action is to check
if the device can be suspended (i.e. if all of the conditions necessary for
suspending the device are satisfied) and to queue up a suspend request for the
device in that case. The value returned by this callback is ignored by the PM
core.
The helper functions provided by the PM core, described in Section 4, guarantee
that the following constraints are met with respect to the bus type's run-time
@ -238,41 +239,41 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
removing the device from device hierarchy
int pm_runtime_idle(struct device *dev);
- execute ->runtime_idle() for the device's bus type; returns 0 on success
or error code on failure, where -EINPROGRESS means that ->runtime_idle()
is already being executed
- execute the subsystem-level idle callback for the device; returns 0 on
success or error code on failure, where -EINPROGRESS means that
->runtime_idle() is already being executed
int pm_runtime_suspend(struct device *dev);
- execute ->runtime_suspend() for the device's bus type; returns 0 on
- execute the subsystem-level suspend callback for the device; returns 0 on
success, 1 if the device's run-time PM status was already 'suspended', or
error code on failure, where -EAGAIN or -EBUSY means it is safe to attempt
to suspend the device again in future
int pm_runtime_resume(struct device *dev);
- execute ->runtime_resume() for the device's bus type; returns 0 on
- execute the subsystem-leve resume callback for the device; returns 0 on
success, 1 if the device's run-time PM status was already 'active' or
error code on failure, where -EAGAIN means it may be safe to attempt to
resume the device again in future, but 'power.runtime_error' should be
checked additionally
int pm_request_idle(struct device *dev);
- submit a request to execute ->runtime_idle() for the device's bus type
(the request is represented by a work item in pm_wq); returns 0 on success
or error code if the request has not been queued up
- submit a request to execute the subsystem-level idle callback for the
device (the request is represented by a work item in pm_wq); returns 0 on
success or error code if the request has not been queued up
int pm_schedule_suspend(struct device *dev, unsigned int delay);
- schedule the execution of ->runtime_suspend() for the device's bus type
in future, where 'delay' is the time to wait before queuing up a suspend
work item in pm_wq, in milliseconds (if 'delay' is zero, the work item is
queued up immediately); returns 0 on success, 1 if the device's PM
- schedule the execution of the subsystem-level suspend callback for the
device in future, where 'delay' is the time to wait before queuing up a
suspend work item in pm_wq, in milliseconds (if 'delay' is zero, the work
item is queued up immediately); returns 0 on success, 1 if the device's PM
run-time status was already 'suspended', or error code if the request
hasn't been scheduled (or queued up if 'delay' is 0); if the execution of
->runtime_suspend() is already scheduled and not yet expired, the new
value of 'delay' will be used as the time to wait
int pm_request_resume(struct device *dev);
- submit a request to execute ->runtime_resume() for the device's bus type
(the request is represented by a work item in pm_wq); returns 0 on
- submit a request to execute the subsystem-level resume callback for the
device (the request is represented by a work item in pm_wq); returns 0 on
success, 1 if the device's run-time PM status was already 'active', or
error code if the request hasn't been queued up
@ -303,12 +304,12 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
run-time PM callbacks described in Section 2
int pm_runtime_disable(struct device *dev);
- prevent the run-time PM helper functions from running the device bus
type's run-time PM callbacks, make sure that all of the pending run-time
PM operations on the device are either completed or canceled; returns
1 if there was a resume request pending and it was necessary to execute
->runtime_resume() for the device's bus type to satisfy that request,
otherwise 0 is returned
- prevent the run-time PM helper functions from running subsystem-level
run-time PM callbacks for the device, make sure that all of the pending
run-time PM operations on the device are either completed or canceled;
returns 1 if there was a resume request pending and it was necessary to
execute the subsystem-level resume callback for the device to satisfy that
request, otherwise 0 is returned
void pm_suspend_ignore_children(struct device *dev, bool enable);
- set/unset the power.ignore_children flag of the device
@ -378,5 +379,5 @@ pm_runtime_suspend() or pm_runtime_idle() or their asynchronous counterparts,
they will fail returning -EAGAIN, because the device's usage counter is
incremented by the core before executing ->probe() and ->remove(). Still, it
may be desirable to suspend the device as soon as ->probe() or ->remove() has
finished, so the PM core uses pm_runtime_idle_sync() to invoke the device bus
type's ->runtime_idle() callback at that time.
finished, so the PM core uses pm_runtime_idle_sync() to invoke the
subsystem-level idle callback for the device at that time.

View file

@ -84,6 +84,19 @@ static int __pm_runtime_idle(struct device *dev)
dev->bus->pm->runtime_idle(dev);
spin_lock_irq(&dev->power.lock);
} else if (dev->type && dev->type->pm && dev->type->pm->runtime_idle) {
spin_unlock_irq(&dev->power.lock);
dev->type->pm->runtime_idle(dev);
spin_lock_irq(&dev->power.lock);
} else if (dev->class && dev->class->pm
&& dev->class->pm->runtime_idle) {
spin_unlock_irq(&dev->power.lock);
dev->class->pm->runtime_idle(dev);
spin_lock_irq(&dev->power.lock);
}
@ -192,6 +205,22 @@ int __pm_runtime_suspend(struct device *dev, bool from_wq)
retval = dev->bus->pm->runtime_suspend(dev);
spin_lock_irq(&dev->power.lock);
dev->power.runtime_error = retval;
} else if (dev->type && dev->type->pm
&& dev->type->pm->runtime_suspend) {
spin_unlock_irq(&dev->power.lock);
retval = dev->type->pm->runtime_suspend(dev);
spin_lock_irq(&dev->power.lock);
dev->power.runtime_error = retval;
} else if (dev->class && dev->class->pm
&& dev->class->pm->runtime_suspend) {
spin_unlock_irq(&dev->power.lock);
retval = dev->class->pm->runtime_suspend(dev);
spin_lock_irq(&dev->power.lock);
dev->power.runtime_error = retval;
} else {
@ -357,6 +386,22 @@ int __pm_runtime_resume(struct device *dev, bool from_wq)
retval = dev->bus->pm->runtime_resume(dev);
spin_lock_irq(&dev->power.lock);
dev->power.runtime_error = retval;
} else if (dev->type && dev->type->pm
&& dev->type->pm->runtime_resume) {
spin_unlock_irq(&dev->power.lock);
retval = dev->type->pm->runtime_resume(dev);
spin_lock_irq(&dev->power.lock);
dev->power.runtime_error = retval;
} else if (dev->class && dev->class->pm
&& dev->class->pm->runtime_resume) {
spin_unlock_irq(&dev->power.lock);
retval = dev->class->pm->runtime_resume(dev);
spin_lock_irq(&dev->power.lock);
dev->power.runtime_error = retval;
} else {