b43: Rewrite suspend/resume code

This removes most of the b43 suspend/resume code (it's handled by mac80211)
and moves the registration of devices to the attachment phase. This is
required, because we must not register/unregister devices on suspend/resume.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Michael Buesch 2009-09-11 21:44:05 +02:00 committed by John W. Linville
parent 90c215c476
commit a78b3bb2f3
4 changed files with 237 additions and 177 deletions

View File

@ -629,13 +629,6 @@ struct b43_wl {
* from the mac80211 subsystem. */
u16 mac80211_initially_registered_queues;
/* R/W lock for data transmission.
* Transmissions on 2+ queues can run concurrently, but somebody else
* might sync with TX by write_lock_irqsave()'ing. */
rwlock_t tx_lock;
/* Lock for LEDs access. */
spinlock_t leds_lock;
/* We can only have one operating interface (802.11 core)
* at a time. General information about this interface follows.
*/
@ -686,6 +679,9 @@ struct b43_wl {
struct work_struct tx_work;
/* Queue of packets to be transmitted. */
struct sk_buff_head tx_queue;
/* The device LEDs. */
struct b43_leds leds;
};
/* The type of the firmware file. */
@ -768,13 +764,10 @@ struct b43_wldev {
/* The device initialization status.
* Use b43_status() to query. */
atomic_t __init_status;
/* Saved init status for handling suspend. */
int suspend_init_status;
bool bad_frames_preempt; /* Use "Bad Frames Preemption" (default off) */
bool dfq_valid; /* Directed frame queue valid (IBSS PS mode, ATIM) */
bool radio_hw_enable; /* saved state of radio hardware enabled state */
bool suspend_in_progress; /* TRUE, if we are in a suspend/resume cycle */
bool qos_enabled; /* TRUE, if QoS is used. */
bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */
@ -794,12 +787,6 @@ struct b43_wldev {
/* Various statistics about the physical device. */
struct b43_stats stats;
/* The device LEDs. */
struct b43_led led_tx;
struct b43_led led_rx;
struct b43_led led_assoc;
struct b43_led led_radio;
/* Reason code of the last interrupt. */
u32 irq_reason;
u32 dma_reason[6];

View File

@ -34,35 +34,75 @@
static void b43_led_turn_on(struct b43_wldev *dev, u8 led_index,
bool activelow)
{
struct b43_wl *wl = dev->wl;
unsigned long flags;
u16 ctl;
spin_lock_irqsave(&wl->leds_lock, flags);
ctl = b43_read16(dev, B43_MMIO_GPIO_CONTROL);
if (activelow)
ctl &= ~(1 << led_index);
else
ctl |= (1 << led_index);
b43_write16(dev, B43_MMIO_GPIO_CONTROL, ctl);
spin_unlock_irqrestore(&wl->leds_lock, flags);
}
static void b43_led_turn_off(struct b43_wldev *dev, u8 led_index,
bool activelow)
{
struct b43_wl *wl = dev->wl;
unsigned long flags;
u16 ctl;
spin_lock_irqsave(&wl->leds_lock, flags);
ctl = b43_read16(dev, B43_MMIO_GPIO_CONTROL);
if (activelow)
ctl |= (1 << led_index);
else
ctl &= ~(1 << led_index);
b43_write16(dev, B43_MMIO_GPIO_CONTROL, ctl);
spin_unlock_irqrestore(&wl->leds_lock, flags);
}
static void b43_led_update(struct b43_wldev *dev,
struct b43_led *led)
{
bool radio_enabled;
bool turn_on;
if (!led->wl)
return;
radio_enabled = (dev->phy.radio_on && dev->radio_hw_enable);
/* The led->state read is racy, but we don't care. In case we raced
* with the brightness_set handler, we will be called again soon
* to fixup our state. */
if (radio_enabled)
turn_on = atomic_read(&led->state) != LED_OFF;
else
turn_on = 0;
if (turn_on == led->hw_state)
return;
led->hw_state = turn_on;
if (turn_on)
b43_led_turn_on(dev, led->index, led->activelow);
else
b43_led_turn_off(dev, led->index, led->activelow);
}
static void b43_leds_work(struct work_struct *work)
{
struct b43_leds *leds = container_of(work, struct b43_leds, work);
struct b43_wl *wl = container_of(leds, struct b43_wl, leds);
struct b43_wldev *dev;
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (unlikely(!dev || b43_status(dev) < B43_STAT_STARTED))
goto out_unlock;
b43_led_update(dev, &wl->leds.led_tx);
b43_led_update(dev, &wl->leds.led_rx);
b43_led_update(dev, &wl->leds.led_radio);
b43_led_update(dev, &wl->leds.led_assoc);
out_unlock:
mutex_unlock(&wl->mutex);
}
/* Callback from the LED subsystem. */
@ -70,21 +110,15 @@ static void b43_led_brightness_set(struct led_classdev *led_dev,
enum led_brightness brightness)
{
struct b43_led *led = container_of(led_dev, struct b43_led, led_dev);
struct b43_wldev *dev = led->dev;
bool radio_enabled;
struct b43_wl *wl = led->wl;
if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED))
return;
/* Checking the radio-enabled status here is slightly racy,
* but we want to avoid the locking overhead and we don't care
* whether the LED has the wrong state for a second. */
radio_enabled = (dev->phy.radio_on && dev->radio_hw_enable);
if (brightness == LED_OFF || !radio_enabled)
b43_led_turn_off(dev, led->index, led->activelow);
else
b43_led_turn_on(dev, led->index, led->activelow);
/* The check for current_dev is only needed while unregistering,
* so it is sequencial and does not race. But we must not dereference
* current_dev here. */
if (likely(wl->current_dev)) {
atomic_set(&led->state, brightness);
ieee80211_queue_work(wl->hw, &wl->leds.work);
}
}
static int b43_register_led(struct b43_wldev *dev, struct b43_led *led,
@ -93,15 +127,15 @@ static int b43_register_led(struct b43_wldev *dev, struct b43_led *led,
{
int err;
b43_led_turn_off(dev, led_index, activelow);
if (led->dev)
if (led->wl)
return -EEXIST;
if (!default_trigger)
return -EINVAL;
led->dev = dev;
led->wl = dev->wl;
led->index = led_index;
led->activelow = activelow;
strncpy(led->name, name, sizeof(led->name));
atomic_set(&led->state, 0);
led->led_dev.name = led->name;
led->led_dev.default_trigger = default_trigger;
@ -110,19 +144,19 @@ static int b43_register_led(struct b43_wldev *dev, struct b43_led *led,
err = led_classdev_register(dev->dev->dev, &led->led_dev);
if (err) {
b43warn(dev->wl, "LEDs: Failed to register %s\n", name);
led->dev = NULL;
led->wl = NULL;
return err;
}
return 0;
}
static void b43_unregister_led(struct b43_led *led)
{
if (!led->dev)
if (!led->wl)
return;
led_classdev_unregister(&led->led_dev);
b43_led_turn_off(led->dev, led->index, led->activelow);
led->dev = NULL;
led->wl = NULL;
}
static void b43_map_led(struct b43_wldev *dev,
@ -137,24 +171,20 @@ static void b43_map_led(struct b43_wldev *dev,
* generic LED triggers. */
switch (behaviour) {
case B43_LED_INACTIVE:
break;
case B43_LED_OFF:
b43_led_turn_off(dev, led_index, activelow);
break;
case B43_LED_ON:
b43_led_turn_on(dev, led_index, activelow);
break;
case B43_LED_ACTIVITY:
case B43_LED_TRANSFER:
case B43_LED_APTRANSFER:
snprintf(name, sizeof(name),
"b43-%s::tx", wiphy_name(hw->wiphy));
b43_register_led(dev, &dev->led_tx, name,
b43_register_led(dev, &dev->wl->leds.led_tx, name,
ieee80211_get_tx_led_name(hw),
led_index, activelow);
snprintf(name, sizeof(name),
"b43-%s::rx", wiphy_name(hw->wiphy));
b43_register_led(dev, &dev->led_rx, name,
b43_register_led(dev, &dev->wl->leds.led_rx, name,
ieee80211_get_rx_led_name(hw),
led_index, activelow);
break;
@ -164,18 +194,15 @@ static void b43_map_led(struct b43_wldev *dev,
case B43_LED_MODE_BG:
snprintf(name, sizeof(name),
"b43-%s::radio", wiphy_name(hw->wiphy));
b43_register_led(dev, &dev->led_radio, name,
b43_register_led(dev, &dev->wl->leds.led_radio, name,
ieee80211_get_radio_led_name(hw),
led_index, activelow);
/* Sync the RF-kill LED state with radio and switch states. */
if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev))
b43_led_turn_on(dev, led_index, activelow);
break;
case B43_LED_WEIRD:
case B43_LED_ASSOC:
snprintf(name, sizeof(name),
"b43-%s::assoc", wiphy_name(hw->wiphy));
b43_register_led(dev, &dev->led_assoc, name,
b43_register_led(dev, &dev->wl->leds.led_assoc, name,
ieee80211_get_assoc_led_name(hw),
led_index, activelow);
break;
@ -186,58 +213,140 @@ static void b43_map_led(struct b43_wldev *dev,
}
}
void b43_leds_init(struct b43_wldev *dev)
static void b43_led_get_sprominfo(struct b43_wldev *dev,
unsigned int led_index,
enum b43_led_behaviour *behaviour,
bool *activelow)
{
struct ssb_bus *bus = dev->dev->bus;
u8 sprom[4];
int i;
enum b43_led_behaviour behaviour;
bool activelow;
sprom[0] = bus->sprom.gpio0;
sprom[1] = bus->sprom.gpio1;
sprom[2] = bus->sprom.gpio2;
sprom[3] = bus->sprom.gpio3;
for (i = 0; i < 4; i++) {
if (sprom[i] == 0xFF) {
/* There is no LED information in the SPROM
* for this LED. Hardcode it here. */
activelow = 0;
switch (i) {
case 0:
behaviour = B43_LED_ACTIVITY;
activelow = 1;
if (bus->boardinfo.vendor == PCI_VENDOR_ID_COMPAQ)
behaviour = B43_LED_RADIO_ALL;
break;
case 1:
behaviour = B43_LED_RADIO_B;
if (bus->boardinfo.vendor == PCI_VENDOR_ID_ASUSTEK)
behaviour = B43_LED_ASSOC;
break;
case 2:
behaviour = B43_LED_RADIO_A;
break;
case 3:
behaviour = B43_LED_OFF;
break;
default:
B43_WARN_ON(1);
return;
}
} else {
behaviour = sprom[i] & B43_LED_BEHAVIOUR;
activelow = !!(sprom[i] & B43_LED_ACTIVELOW);
if (sprom[led_index] == 0xFF) {
/* There is no LED information in the SPROM
* for this LED. Hardcode it here. */
*activelow = 0;
switch (led_index) {
case 0:
*behaviour = B43_LED_ACTIVITY;
*activelow = 1;
if (bus->boardinfo.vendor == PCI_VENDOR_ID_COMPAQ)
*behaviour = B43_LED_RADIO_ALL;
break;
case 1:
*behaviour = B43_LED_RADIO_B;
if (bus->boardinfo.vendor == PCI_VENDOR_ID_ASUSTEK)
*behaviour = B43_LED_ASSOC;
break;
case 2:
*behaviour = B43_LED_RADIO_A;
break;
case 3:
*behaviour = B43_LED_OFF;
break;
default:
B43_WARN_ON(1);
return;
}
} else {
*behaviour = sprom[led_index] & B43_LED_BEHAVIOUR;
*activelow = !!(sprom[led_index] & B43_LED_ACTIVELOW);
}
}
void b43_leds_init(struct b43_wldev *dev)
{
struct b43_led *led;
unsigned int i;
enum b43_led_behaviour behaviour;
bool activelow;
/* Sync the RF-kill LED state (if we have one) with radio and switch states. */
led = &dev->wl->leds.led_radio;
if (led->wl) {
if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev)) {
b43_led_turn_on(dev, led->index, led->activelow);
led->hw_state = 1;
atomic_set(&led->state, 1);
} else {
b43_led_turn_off(dev, led->index, led->activelow);
led->hw_state = 0;
atomic_set(&led->state, 0);
}
}
/* Initialize TX/RX/ASSOC leds */
led = &dev->wl->leds.led_tx;
if (led->wl) {
b43_led_turn_off(dev, led->index, led->activelow);
led->hw_state = 0;
atomic_set(&led->state, 0);
}
led = &dev->wl->leds.led_rx;
if (led->wl) {
b43_led_turn_off(dev, led->index, led->activelow);
led->hw_state = 0;
atomic_set(&led->state, 0);
}
led = &dev->wl->leds.led_assoc;
if (led->wl) {
b43_led_turn_off(dev, led->index, led->activelow);
led->hw_state = 0;
atomic_set(&led->state, 0);
}
/* Initialize other LED states. */
for (i = 0; i < B43_MAX_NR_LEDS; i++) {
b43_led_get_sprominfo(dev, i, &behaviour, &activelow);
switch (behaviour) {
case B43_LED_OFF:
b43_led_turn_off(dev, i, activelow);
break;
case B43_LED_ON:
b43_led_turn_on(dev, i, activelow);
break;
default:
/* Leave others as-is. */
break;
}
b43_map_led(dev, i, behaviour, activelow);
}
}
void b43_leds_exit(struct b43_wldev *dev)
{
b43_unregister_led(&dev->led_tx);
b43_unregister_led(&dev->led_rx);
b43_unregister_led(&dev->led_assoc);
b43_unregister_led(&dev->led_radio);
struct b43_leds *leds = &dev->wl->leds;
b43_led_turn_off(dev, leds->led_tx.index, leds->led_tx.activelow);
b43_led_turn_off(dev, leds->led_rx.index, leds->led_rx.activelow);
b43_led_turn_off(dev, leds->led_assoc.index, leds->led_assoc.activelow);
b43_led_turn_off(dev, leds->led_radio.index, leds->led_radio.activelow);
}
void b43_leds_register(struct b43_wldev *dev)
{
unsigned int i;
enum b43_led_behaviour behaviour;
bool activelow;
INIT_WORK(&dev->wl->leds.work, b43_leds_work);
/* Register the LEDs to the LED subsystem. */
for (i = 0; i < B43_MAX_NR_LEDS; i++) {
b43_led_get_sprominfo(dev, i, &behaviour, &activelow);
b43_map_led(dev, i, behaviour, activelow);
}
}
void b43_leds_unregister(struct b43_wldev *dev)
{
struct b43_leds *leds = &dev->wl->leds;
b43_unregister_led(&leds->led_tx);
b43_unregister_led(&leds->led_rx);
b43_unregister_led(&leds->led_assoc);
b43_unregister_led(&leds->led_radio);
}

View File

@ -7,12 +7,13 @@ struct b43_wldev;
#include <linux/types.h>
#include <linux/leds.h>
#include <linux/workqueue.h>
#define B43_LED_MAX_NAME_LEN 31
struct b43_led {
struct b43_wldev *dev;
struct b43_wl *wl;
/* The LED class device */
struct led_classdev led_dev;
/* The index number of the LED. */
@ -22,8 +23,23 @@ struct b43_led {
bool activelow;
/* The unique name string for this LED device. */
char name[B43_LED_MAX_NAME_LEN + 1];
/* The current status of the LED. This is updated locklessly. */
atomic_t state;
/* The active state in hardware. */
bool hw_state;
};
struct b43_leds {
struct b43_led led_tx;
struct b43_led led_rx;
struct b43_led led_radio;
struct b43_led led_assoc;
struct work_struct work;
};
#define B43_MAX_NR_LEDS 4
#define B43_LED_BEHAVIOUR 0x7F
#define B43_LED_ACTIVELOW 0x80
/* LED behaviour values */
@ -42,6 +58,8 @@ enum b43_led_behaviour {
B43_LED_INACTIVE,
};
void b43_leds_register(struct b43_wldev *dev);
void b43_leds_unregister(struct b43_wldev *dev);
void b43_leds_init(struct b43_wldev *dev);
void b43_leds_exit(struct b43_wldev *dev);
@ -49,10 +67,16 @@ void b43_leds_exit(struct b43_wldev *dev);
#else /* CONFIG_B43_LEDS */
/* LED support disabled */
struct b43_led {
struct b43_leds {
/* empty */
};
static inline void b43_leds_register(struct b43_wldev *dev)
{
}
static inline void b43_leds_unregister(struct b43_wldev *dev)
{
}
static inline void b43_leds_init(struct b43_wldev *dev)
{
}

View File

@ -3002,14 +3002,18 @@ static void b43_security_init(struct b43_wldev *dev)
static int b43_rng_read(struct hwrng *rng, u32 *data)
{
struct b43_wl *wl = (struct b43_wl *)rng->priv;
struct b43_wldev *dev;
int count = -ENODEV;
/* FIXME: We need to take wl->mutex here to make sure the device
* is not going away from under our ass. However it could deadlock
* with hwrng internal locking. */
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (likely(dev && b43_status(dev) >= B43_STAT_INITIALIZED)) {
*data = b43_read16(dev, B43_MMIO_RNG);
count = sizeof(u16);
}
mutex_unlock(&wl->mutex);
*data = b43_read16(wl->current_dev, B43_MMIO_RNG);
return (sizeof(u16));
return count;
}
#endif /* CONFIG_B43_HWRNG */
@ -3851,6 +3855,7 @@ redo:
b43_mac_suspend(dev);
free_irq(dev->dev->irq, dev);
b43_leds_exit(dev);
b43dbg(wl, "Wireless interface stopped\n");
return dev;
@ -3882,8 +3887,10 @@ static int b43_wireless_core_start(struct b43_wldev *dev)
/* Start maintainance work */
b43_periodic_tasks_setup(dev);
b43_leds_init(dev);
b43dbg(dev->wl, "Wireless interface started\n");
out:
out:
return err;
}
@ -4160,10 +4167,6 @@ static void b43_wireless_core_exit(struct b43_wldev *dev)
macctl |= B43_MACCTL_PSM_JMP0;
b43_write32(dev, B43_MMIO_MACCTL, macctl);
if (!dev->suspend_in_progress) {
b43_leds_exit(dev);
b43_rng_exit(dev->wl);
}
b43_dma_free(dev);
b43_pio_free(dev);
b43_chip_exit(dev);
@ -4180,7 +4183,6 @@ static void b43_wireless_core_exit(struct b43_wldev *dev)
/* Initialize a wireless core */
static int b43_wireless_core_init(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
struct ssb_bus *bus = dev->dev->bus;
struct ssb_sprom *sprom = &bus->sprom;
struct b43_phy *phy = &dev->phy;
@ -4280,15 +4282,11 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
ssb_bus_powerup(bus, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW));
b43_upload_card_macaddress(dev);
b43_security_init(dev);
if (!dev->suspend_in_progress)
b43_rng_init(wl);
ieee80211_wake_queues(dev->wl->hw);
b43_set_status(dev, B43_STAT_INITIALIZED);
if (!dev->suspend_in_progress)
b43_leds_init(dev);
out:
return err;
@ -4837,7 +4835,6 @@ static int b43_wireless_init(struct ssb_device *dev)
/* Initialize struct b43_wl */
wl->hw = hw;
spin_lock_init(&wl->leds_lock);
mutex_init(&wl->mutex);
spin_lock_init(&wl->hardirq_lock);
INIT_LIST_HEAD(&wl->devlist);
@ -4878,6 +4875,8 @@ static int b43_probe(struct ssb_device *dev, const struct ssb_device_id *id)
err = ieee80211_register_hw(wl->hw);
if (err)
goto err_one_core_detach;
b43_leds_register(wl->current_dev);
b43_rng_init(wl);
}
out:
@ -4906,12 +4905,16 @@ static void b43_remove(struct ssb_device *dev)
* might have modified it. Restoring is important, so the networking
* stack can properly free resources. */
wl->hw->queues = wl->mac80211_initially_registered_queues;
wl->current_dev = NULL;
cancel_work_sync(&wl->leds.work);
ieee80211_unregister_hw(wl->hw);
}
b43_one_core_detach(dev);
if (list_empty(&wl->devlist)) {
b43_rng_exit(wl);
b43_leds_unregister(wldev);
/* Last core on the chip unregistered.
* We can destroy common struct b43_wl.
*/
@ -4929,74 +4932,11 @@ void b43_controller_restart(struct b43_wldev *dev, const char *reason)
ieee80211_queue_work(dev->wl->hw, &dev->restart_work);
}
#ifdef CONFIG_PM
static int b43_suspend(struct ssb_device *dev, pm_message_t state)
{
struct b43_wldev *wldev = ssb_get_drvdata(dev);
struct b43_wl *wl = wldev->wl;
b43dbg(wl, "Suspending...\n");
mutex_lock(&wl->mutex);
wldev->suspend_in_progress = true;
wldev->suspend_init_status = b43_status(wldev);
if (wldev->suspend_init_status >= B43_STAT_STARTED)
wldev = b43_wireless_core_stop(wldev);
if (wldev && wldev->suspend_init_status >= B43_STAT_INITIALIZED)
b43_wireless_core_exit(wldev);
mutex_unlock(&wl->mutex);
b43dbg(wl, "Device suspended.\n");
return 0;
}
static int b43_resume(struct ssb_device *dev)
{
struct b43_wldev *wldev = ssb_get_drvdata(dev);
struct b43_wl *wl = wldev->wl;
int err = 0;
b43dbg(wl, "Resuming...\n");
mutex_lock(&wl->mutex);
if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) {
err = b43_wireless_core_init(wldev);
if (err) {
b43err(wl, "Resume failed at core init\n");
goto out;
}
}
if (wldev->suspend_init_status >= B43_STAT_STARTED) {
err = b43_wireless_core_start(wldev);
if (err) {
b43_leds_exit(wldev);
b43_rng_exit(wldev->wl);
b43_wireless_core_exit(wldev);
b43err(wl, "Resume failed at core start\n");
goto out;
}
}
b43dbg(wl, "Device resumed.\n");
out:
wldev->suspend_in_progress = false;
mutex_unlock(&wl->mutex);
return err;
}
#else /* CONFIG_PM */
# define b43_suspend NULL
# define b43_resume NULL
#endif /* CONFIG_PM */
static struct ssb_driver b43_ssb_driver = {
.name = KBUILD_MODNAME,
.id_table = b43_ssb_tbl,
.probe = b43_probe,
.remove = b43_remove,
.suspend = b43_suspend,
.resume = b43_resume,
};
static void b43_print_driverinfo(void)