comedi: ni_labpc_common: Conditionally remove I/O port support

In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.

The ni_labpc_common module is used by the ni_labpc module (for ISA
cards), the ni_labpc_cs module (for PCMCIA cards), and the ni_labpc_pci
module (for PCI cards).  The ISA and PCMCIA cards use port I/O and the
PCI cards use memory-mapped I/O.

Conditionally compile the parts of the module that use the port I/O
functions so they are compiled if and only if the `CONFIG_HAS_IOPORT`
macro is defined, so that the module can be built if the port I/O
functions have not been declared.

Add a run-time check in the `labpc_common_attach()` to return an error
if the comedi device wants to use port I/O when the `CONFIG_HAS_IOPORT`
macro is undefined.

The changes allow the module to be built even if the port I/O functions
have not been declared.

Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-9-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Ian Abbott 2023-09-13 18:07:07 +01:00 committed by Greg Kroah-Hartman
parent 7187a0939a
commit a7b9ffd8c2
1 changed files with 9 additions and 0 deletions

View File

@ -78,6 +78,9 @@ static const struct comedi_lrange range_labpc_ao = {
* functions that do inb/outb and readb/writeb so we can use
* function pointers to decide which to use
*/
#ifdef CONFIG_HAS_IOPORT
static unsigned int labpc_inb(struct comedi_device *dev, unsigned long reg)
{
return inb(dev->iobase + reg);
@ -89,6 +92,8 @@ static void labpc_outb(struct comedi_device *dev,
outb(byte, dev->iobase + reg);
}
#endif /* CONFIG_HAS_IOPORT */
static unsigned int labpc_readb(struct comedi_device *dev, unsigned long reg)
{
return readb(dev->mmio + reg);
@ -1200,8 +1205,12 @@ int labpc_common_attach(struct comedi_device *dev,
devpriv->read_byte = labpc_readb;
devpriv->write_byte = labpc_writeb;
} else {
#ifdef CONFIG_HAS_IOPORT
devpriv->read_byte = labpc_inb;
devpriv->write_byte = labpc_outb;
#else
return -ENXIO;
#endif
}
/* initialize board's command registers */