mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity

sparc64: fix FP corruption in user copy functions 

Short story: Exception handlers used by some copy_to_user() and
copy_from_user() functions do not diligently clean up floating point
register usage, and this can result in a user process seeing invalid
values in floating point registers. This sometimes makes the process
fail.

Long story: Several cpu-specific (NG4, NG2, U1, U3) memcpy functions
use floating point registers and VIS alignaddr/faligndata to
accelerate data copying when source and dest addresses don't align
well. Linux uses a lazy scheme for saving floating point registers; It
is not done upon entering the kernel since it's a very expensive
operation. Rather, it is done only when needed. If the kernel ends up
not using FP regs during the course of some trap or system call, then
it can return to user space without saving or restoring them.

The various memcpy functions begin their FP code with VISEntry (or a
variation thereof), which saves the FP regs. They conclude their FP
code with VISExit (or a variation) which essentially marks the FP regs
"clean", ie, they contain no unsaved values. fprs.FPRS_FEF is turned
off so that a lazy restore will be triggered when/if the user process
accesses floating point regs again.

The bug is that the user copy variants of memcpy, copy_from_user() and
copy_to_user(), employ an exception handling mechanism to detect faults
when accessing user space addresses, and when this handler is invoked,
an immediate return from the function is forced, and VISExit is not
executed, thus leaving the fprs register in an indeterminate state,
but often with fprs.FPRS_FEF set and one or more dirty bits. This
results in a return to user space with invalid values in the FP regs,
and since fprs.FPRS_FEF is on, no lazy restore occurs.

This bug affects copy_to_user() and copy_from_user() for NG4, NG2,
U3, and U1. All are fixed by using a new exception handler for those
loads and stores that are done during the time between VISEnter and
VISExit.

n.b. In NG4memcpy, the problematic code can be triggered by a copy
size greater than 128 bytes and an unaligned source address.  This bug
is known to be the cause of random user process memory corruptions
while perf is running with the callgraph option (ie, perf record -g).
This occurs because perf uses copy_from_user() to read user stacks,
and may fault when it follows a stack frame pointer off to an
invalid page. Validation checks on the stack address just obscure
the underlying problem.

Signed-off-by: Rob Gardner <rob.gardner@oracle.com>
Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Rob Gardner 2015-12-22 23:24:49 -07:00 committed by David S. Miller
parent 833526941f
commit a7c5724b5c
13 changed files with 235 additions and 134 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
arch/sparc/kernel/head_64.S
View File

@ -946,6 +946,12 @@ ENTRY(__retl_one)
mov 1, %o0
ENDPROC(__retl_one)
ENTRY(__retl_one_fp)
VISExitHalf
retl
mov 1, %o0
ENDPROC(__retl_one_fp)
ENTRY(__ret_one_asi)
wr %g0, ASI_AIUS, %asi
ret
@ -958,6 +964,13 @@ ENTRY(__retl_one_asi)
mov 1, %o0
ENDPROC(__retl_one_asi)
ENTRY(__retl_one_asi_fp)
wr %g0, ASI_AIUS, %asi
VISExitHalf
retl
mov 1, %o0
ENDPROC(__retl_one_asi_fp)
ENTRY(__retl_o1)
retl
mov %o1, %o0

8
arch/sparc/lib/NG2copy_from_user.S
View File

@ -11,6 +11,14 @@
.text; \
.align 4;
#define EX_LD_FP(x) \
98: x; \
.section __ex_table,"a";\
.align 4; \
.word 98b, __retl_one_asi_fp;\
.text; \
.align 4;
#ifndef ASI_AIUS
#define ASI_AIUS 0x11
#endif

8
arch/sparc/lib/NG2copy_to_user.S
View File

@ -11,6 +11,14 @@
.text; \
.align 4;
#define EX_ST_FP(x) \
98: x; \
.section __ex_table,"a";\
.align 4; \
.word 98b, __retl_one_asi_fp;\
.text; \
.align 4;
#ifndef ASI_AIUS
#define ASI_AIUS 0x11
#endif

118
arch/sparc/lib/NG2memcpy.S
View File

@ -34,10 +34,16 @@
#ifndef EX_LD
#define EX_LD(x) x
#endif
#ifndef EX_LD_FP
#define EX_LD_FP(x) x
#endif
#ifndef EX_ST
#define EX_ST(x) x
#endif
#ifndef EX_ST_FP
#define EX_ST_FP(x) x
#endif
#ifndef EX_RETVAL
#define EX_RETVAL(x) x
@ -134,40 +140,40 @@
fsrc2 %x6, %f12; \
fsrc2 %x7, %f14;
#define FREG_LOAD_1(base, x0) \
EX_LD(LOAD(ldd, base + 0x00, %x0))
EX_LD_FP(LOAD(ldd, base + 0x00, %x0))
#define FREG_LOAD_2(base, x0, x1) \
EX_LD(LOAD(ldd, base + 0x00, %x0)); \
EX_LD(LOAD(ldd, base + 0x08, %x1));
EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
EX_LD_FP(LOAD(ldd, base + 0x08, %x1));
#define FREG_LOAD_3(base, x0, x1, x2) \
EX_LD(LOAD(ldd, base + 0x00, %x0)); \
EX_LD(LOAD(ldd, base + 0x08, %x1)); \
EX_LD(LOAD(ldd, base + 0x10, %x2));
EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \
EX_LD_FP(LOAD(ldd, base + 0x10, %x2));
#define FREG_LOAD_4(base, x0, x1, x2, x3) \
EX_LD(LOAD(ldd, base + 0x00, %x0)); \
EX_LD(LOAD(ldd, base + 0x08, %x1)); \
EX_LD(LOAD(ldd, base + 0x10, %x2)); \
EX_LD(LOAD(ldd, base + 0x18, %x3));
EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \
EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \
EX_LD_FP(LOAD(ldd, base + 0x18, %x3));
#define FREG_LOAD_5(base, x0, x1, x2, x3, x4) \
EX_LD(LOAD(ldd, base + 0x00, %x0)); \
EX_LD(LOAD(ldd, base + 0x08, %x1)); \
EX_LD(LOAD(ldd, base + 0x10, %x2)); \
EX_LD(LOAD(ldd, base + 0x18, %x3)); \
EX_LD(LOAD(ldd, base + 0x20, %x4));
EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \
EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \
EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \
EX_LD_FP(LOAD(ldd, base + 0x20, %x4));
#define FREG_LOAD_6(base, x0, x1, x2, x3, x4, x5) \
EX_LD(LOAD(ldd, base + 0x00, %x0)); \
EX_LD(LOAD(ldd, base + 0x08, %x1)); \
EX_LD(LOAD(ldd, base + 0x10, %x2)); \
EX_LD(LOAD(ldd, base + 0x18, %x3)); \
EX_LD(LOAD(ldd, base + 0x20, %x4)); \
EX_LD(LOAD(ldd, base + 0x28, %x5));
EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \
EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \
EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \
EX_LD_FP(LOAD(ldd, base + 0x20, %x4)); \
EX_LD_FP(LOAD(ldd, base + 0x28, %x5));
#define FREG_LOAD_7(base, x0, x1, x2, x3, x4, x5, x6) \
EX_LD(LOAD(ldd, base + 0x00, %x0)); \
EX_LD(LOAD(ldd, base + 0x08, %x1)); \
EX_LD(LOAD(ldd, base + 0x10, %x2)); \
EX_LD(LOAD(ldd, base + 0x18, %x3)); \
EX_LD(LOAD(ldd, base + 0x20, %x4)); \
EX_LD(LOAD(ldd, base + 0x28, %x5)); \
EX_LD(LOAD(ldd, base + 0x30, %x6));
EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \
EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \
EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \
EX_LD_FP(LOAD(ldd, base + 0x20, %x4)); \
EX_LD_FP(LOAD(ldd, base + 0x28, %x5)); \
EX_LD_FP(LOAD(ldd, base + 0x30, %x6));
.register %g2,#scratch
.register %g3,#scratch
@ -275,11 +281,11 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
nop
/* fall through for 0 < low bits < 8 */
110: sub %o4, 64, %g2
EX_LD(LOAD_BLK(%g2, %f0))
1: EX_ST(STORE_INIT(%g0, %o4 + %g3))
EX_LD(LOAD_BLK(%o4, %f16))
EX_LD_FP(LOAD_BLK(%g2, %f0))
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
EX_LD_FP(LOAD_BLK(%o4, %f16))
FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f14, f16)
EX_ST(STORE_BLK(%f0, %o4 + %g3))
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
FREG_MOVE_8(f16, f18, f20, f22, f24, f26, f28, f30)
subcc %g1, 64, %g1
add %o4, 64, %o4
@ -290,10 +296,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
120: sub %o4, 56, %g2
FREG_LOAD_7(%g2, f0, f2, f4, f6, f8, f10, f12)
1: EX_ST(STORE_INIT(%g0, %o4 + %g3))
EX_LD(LOAD_BLK(%o4, %f16))
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
EX_LD_FP(LOAD_BLK(%o4, %f16))
FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f16, f18)
EX_ST(STORE_BLK(%f0, %o4 + %g3))
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
FREG_MOVE_7(f18, f20, f22, f24, f26, f28, f30)
subcc %g1, 64, %g1
add %o4, 64, %o4
@ -304,10 +310,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
130: sub %o4, 48, %g2
FREG_LOAD_6(%g2, f0, f2, f4, f6, f8, f10)
1: EX_ST(STORE_INIT(%g0, %o4 + %g3))
EX_LD(LOAD_BLK(%o4, %f16))
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
EX_LD_FP(LOAD_BLK(%o4, %f16))
FREG_FROB(f0, f2, f4, f6, f8, f10, f16, f18, f20)
EX_ST(STORE_BLK(%f0, %o4 + %g3))
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
FREG_MOVE_6(f20, f22, f24, f26, f28, f30)
subcc %g1, 64, %g1
add %o4, 64, %o4
@ -318,10 +324,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
140: sub %o4, 40, %g2
FREG_LOAD_5(%g2, f0, f2, f4, f6, f8)
1: EX_ST(STORE_INIT(%g0, %o4 + %g3))
EX_LD(LOAD_BLK(%o4, %f16))
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
EX_LD_FP(LOAD_BLK(%o4, %f16))
FREG_FROB(f0, f2, f4, f6, f8, f16, f18, f20, f22)
EX_ST(STORE_BLK(%f0, %o4 + %g3))
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
FREG_MOVE_5(f22, f24, f26, f28, f30)
subcc %g1, 64, %g1
add %o4, 64, %o4
@ -332,10 +338,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
150: sub %o4, 32, %g2
FREG_LOAD_4(%g2, f0, f2, f4, f6)
1: EX_ST(STORE_INIT(%g0, %o4 + %g3))
EX_LD(LOAD_BLK(%o4, %f16))
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
EX_LD_FP(LOAD_BLK(%o4, %f16))
FREG_FROB(f0, f2, f4, f6, f16, f18, f20, f22, f24)
EX_ST(STORE_BLK(%f0, %o4 + %g3))
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
FREG_MOVE_4(f24, f26, f28, f30)
subcc %g1, 64, %g1
add %o4, 64, %o4
@ -346,10 +352,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
160: sub %o4, 24, %g2
FREG_LOAD_3(%g2, f0, f2, f4)
1: EX_ST(STORE_INIT(%g0, %o4 + %g3))
EX_LD(LOAD_BLK(%o4, %f16))
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
EX_LD_FP(LOAD_BLK(%o4, %f16))
FREG_FROB(f0, f2, f4, f16, f18, f20, f22, f24, f26)
EX_ST(STORE_BLK(%f0, %o4 + %g3))
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
FREG_MOVE_3(f26, f28, f30)
subcc %g1, 64, %g1
add %o4, 64, %o4
@ -360,10 +366,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
170: sub %o4, 16, %g2
FREG_LOAD_2(%g2, f0, f2)
1: EX_ST(STORE_INIT(%g0, %o4 + %g3))
EX_LD(LOAD_BLK(%o4, %f16))
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
EX_LD_FP(LOAD_BLK(%o4, %f16))
FREG_FROB(f0, f2, f16, f18, f20, f22, f24, f26, f28)
EX_ST(STORE_BLK(%f0, %o4 + %g3))
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
FREG_MOVE_2(f28, f30)
subcc %g1, 64, %g1
add %o4, 64, %o4
@ -374,10 +380,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
180: sub %o4, 8, %g2
FREG_LOAD_1(%g2, f0)
1: EX_ST(STORE_INIT(%g0, %o4 + %g3))
EX_LD(LOAD_BLK(%o4, %f16))
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
EX_LD_FP(LOAD_BLK(%o4, %f16))
FREG_FROB(f0, f16, f18, f20, f22, f24, f26, f28, f30)
EX_ST(STORE_BLK(%f0, %o4 + %g3))
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
FREG_MOVE_1(f30)
subcc %g1, 64, %g1
add %o4, 64, %o4
@ -387,10 +393,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
nop
190:
1: EX_ST(STORE_INIT(%g0, %o4 + %g3))
1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
subcc %g1, 64, %g1
EX_LD(LOAD_BLK(%o4, %f0))
EX_ST(STORE_BLK(%f0, %o4 + %g3))
EX_LD_FP(LOAD_BLK(%o4, %f0))
EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
add %o4, 64, %o4
bne,pt %xcc, 1b
LOAD(prefetch, %o4 + 64, #one_read)

8
arch/sparc/lib/NG4copy_from_user.S
View File

@ -11,6 +11,14 @@
.text; \
.align 4;
#define EX_LD_FP(x) \
98: x; \
.section __ex_table,"a";\
.align 4; \
.word 98b, __retl_one_asi_fp;\
.text; \
.align 4;
#ifndef ASI_AIUS
#define ASI_AIUS 0x11
#endif

8
arch/sparc/lib/NG4copy_to_user.S
View File

@ -11,6 +11,14 @@
.text; \
.align 4;
#define EX_ST_FP(x) \
98: x; \
.section __ex_table,"a";\
.align 4; \
.word 98b, __retl_one_asi_fp;\
.text; \
.align 4;
#ifndef ASI_AIUS
#define ASI_AIUS 0x11
#endif

40
arch/sparc/lib/NG4memcpy.S
View File

@ -48,10 +48,16 @@
#ifndef EX_LD
#define EX_LD(x) x
#endif
#ifndef EX_LD_FP
#define EX_LD_FP(x) x
#endif
#ifndef EX_ST
#define EX_ST(x) x
#endif
#ifndef EX_ST_FP
#define EX_ST_FP(x) x
#endif
#ifndef EX_RETVAL
#define EX_RETVAL(x) x
@ -210,17 +216,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
sub %o2, %o4, %o2
alignaddr %o1, %g0, %g1
add %o1, %o4, %o1
EX_LD(LOAD(ldd, %g1 + 0x00, %f0))
1: EX_LD(LOAD(ldd, %g1 + 0x08, %f2))
EX_LD_FP(LOAD(ldd, %g1 + 0x00, %f0))
1: EX_LD_FP(LOAD(ldd, %g1 + 0x08, %f2))
subcc %o4, 0x40, %o4
EX_LD(LOAD(ldd, %g1 + 0x10, %f4))
EX_LD(LOAD(ldd, %g1 + 0x18, %f6))
EX_LD(LOAD(ldd, %g1 + 0x20, %f8))
EX_LD(LOAD(ldd, %g1 + 0x28, %f10))
EX_LD(LOAD(ldd, %g1 + 0x30, %f12))
EX_LD(LOAD(ldd, %g1 + 0x38, %f14))
EX_LD_FP(LOAD(ldd, %g1 + 0x10, %f4))
EX_LD_FP(LOAD(ldd, %g1 + 0x18, %f6))
EX_LD_FP(LOAD(ldd, %g1 + 0x20, %f8))
EX_LD_FP(LOAD(ldd, %g1 + 0x28, %f10))
EX_LD_FP(LOAD(ldd, %g1 + 0x30, %f12))
EX_LD_FP(LOAD(ldd, %g1 + 0x38, %f14))
faligndata %f0, %f2, %f16
EX_LD(LOAD(ldd, %g1 + 0x40, %f0))
EX_LD_FP(LOAD(ldd, %g1 + 0x40, %f0))
faligndata %f2, %f4, %f18
add %g1, 0x40, %g1
faligndata %f4, %f6, %f20
@ -229,14 +235,14 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
faligndata %f10, %f12, %f26
faligndata %f12, %f14, %f28
faligndata %f14, %f0, %f30
EX_ST(STORE(std, %f16, %o0 + 0x00))
EX_ST(STORE(std, %f18, %o0 + 0x08))
EX_ST(STORE(std, %f20, %o0 + 0x10))
EX_ST(STORE(std, %f22, %o0 + 0x18))
EX_ST(STORE(std, %f24, %o0 + 0x20))
EX_ST(STORE(std, %f26, %o0 + 0x28))
EX_ST(STORE(std, %f28, %o0 + 0x30))
EX_ST(STORE(std, %f30, %o0 + 0x38))
EX_ST_FP(STORE(std, %f16, %o0 + 0x00))
EX_ST_FP(STORE(std, %f18, %o0 + 0x08))
EX_ST_FP(STORE(std, %f20, %o0 + 0x10))
EX_ST_FP(STORE(std, %f22, %o0 + 0x18))
EX_ST_FP(STORE(std, %f24, %o0 + 0x20))
EX_ST_FP(STORE(std, %f26, %o0 + 0x28))
EX_ST_FP(STORE(std, %f28, %o0 + 0x30))
EX_ST_FP(STORE(std, %f30, %o0 + 0x38))
add %o0, 0x40, %o0
bne,pt %icc, 1b
LOAD(prefetch, %g1 + 0x200, #n_reads_strong)

8
arch/sparc/lib/U1copy_from_user.S
View File

@ -11,6 +11,14 @@
.text; \
.align 4;
#define EX_LD_FP(x) \
98: x; \
.section __ex_table,"a";\
.align 4; \
.word 98b, __retl_one_fp;\
.text; \
.align 4;
#define FUNC_NAME ___copy_from_user
#define LOAD(type,addr,dest) type##a [addr] %asi, dest
#define LOAD_BLK(addr,dest) ldda [addr] ASI_BLK_AIUS, dest

8
arch/sparc/lib/U1copy_to_user.S
View File

@ -11,6 +11,14 @@
.text; \
.align 4;
#define EX_ST_FP(x) \
98: x; \
.section __ex_table,"a";\
.align 4; \
.word 98b, __retl_one_fp;\
.text; \
.align 4;
#define FUNC_NAME ___copy_to_user
#define STORE(type,src,addr) type##a src, [addr] ASI_AIUS
#define STORE_BLK(src,addr) stda src, [addr] ASI_BLK_AIUS

48
arch/sparc/lib/U1memcpy.S
View File

@ -25,10 +25,16 @@
#ifndef EX_LD
#define EX_LD(x) x
#endif
#ifndef EX_LD_FP
#define EX_LD_FP(x) x
#endif
#ifndef EX_ST
#define EX_ST(x) x
#endif
#ifndef EX_ST_FP
#define EX_ST_FP(x) x
#endif
#ifndef EX_RETVAL
#define EX_RETVAL(x) x
@ -73,8 +79,8 @@
faligndata %f8, %f9, %f62;
#define MAIN_LOOP_CHUNK(src, dest, fdest, fsrc, len, jmptgt) \
EX_LD(LOAD_BLK(%src, %fdest)); \
EX_ST(STORE_BLK(%fsrc, %dest)); \
EX_LD_FP(LOAD_BLK(%src, %fdest)); \
EX_ST_FP(STORE_BLK(%fsrc, %dest)); \
add %src, 0x40, %src; \
subcc %len, 0x40, %len; \
be,pn %xcc, jmptgt; \
@ -89,12 +95,12 @@
#define DO_SYNC membar #Sync;
#define STORE_SYNC(dest, fsrc) \
EX_ST(STORE_BLK(%fsrc, %dest)); \
EX_ST_FP(STORE_BLK(%fsrc, %dest)); \
add %dest, 0x40, %dest; \
DO_SYNC
#define STORE_JUMP(dest, fsrc, target) \
EX_ST(STORE_BLK(%fsrc, %dest)); \
EX_ST_FP(STORE_BLK(%fsrc, %dest)); \
add %dest, 0x40, %dest; \
ba,pt %xcc, target; \
nop;
@ -103,7 +109,7 @@
subcc %left, 8, %left;\
bl,pn %xcc, 95f; \
faligndata %f0, %f1, %f48; \
EX_ST(STORE(std, %f48, %dest)); \
EX_ST_FP(STORE(std, %f48, %dest)); \
add %dest, 8, %dest;
#define UNEVEN_VISCHUNK_LAST(dest, f0, f1, left) \
@ -160,8 +166,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
and %g2, 0x38, %g2
1: subcc %g1, 0x1, %g1
EX_LD(LOAD(ldub, %o1 + 0x00, %o3))
EX_ST(STORE(stb, %o3, %o1 + %GLOBAL_SPARE))
EX_LD_FP(LOAD(ldub, %o1 + 0x00, %o3))
EX_ST_FP(STORE(stb, %o3, %o1 + %GLOBAL_SPARE))
bgu,pt %XCC, 1b
add %o1, 0x1, %o1
@ -172,20 +178,20 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
be,pt %icc, 3f
alignaddr %o1, %g0, %o1
EX_LD(LOAD(ldd, %o1, %f4))
1: EX_LD(LOAD(ldd, %o1 + 0x8, %f6))
EX_LD_FP(LOAD(ldd, %o1, %f4))
1: EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f6))
add %o1, 0x8, %o1
subcc %g2, 0x8, %g2
faligndata %f4, %f6, %f0
EX_ST(STORE(std, %f0, %o0))
EX_ST_FP(STORE(std, %f0, %o0))
be,pn %icc, 3f
add %o0, 0x8, %o0
EX_LD(LOAD(ldd, %o1 + 0x8, %f4))
EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f4))
add %o1, 0x8, %o1
subcc %g2, 0x8, %g2
faligndata %f6, %f4, %f0
EX_ST(STORE(std, %f0, %o0))
EX_ST_FP(STORE(std, %f0, %o0))
bne,pt %icc, 1b
add %o0, 0x8, %o0
@ -208,13 +214,13 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
add %g1, %GLOBAL_SPARE, %g1
subcc %o2, %g3, %o2
EX_LD(LOAD_BLK(%o1, %f0))
EX_LD_FP(LOAD_BLK(%o1, %f0))
add %o1, 0x40, %o1
add %g1, %g3, %g1
EX_LD(LOAD_BLK(%o1, %f16))
EX_LD_FP(LOAD_BLK(%o1, %f16))
add %o1, 0x40, %o1
sub %GLOBAL_SPARE, 0x80, %GLOBAL_SPARE
EX_LD(LOAD_BLK(%o1, %f32))
EX_LD_FP(LOAD_BLK(%o1, %f32))
add %o1, 0x40, %o1
/* There are 8 instances of the unrolled loop,
@ -426,28 +432,28 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
62: FINISH_VISCHUNK(o0, f44, f46, g3)
63: UNEVEN_VISCHUNK_LAST(o0, f46, f0, g3)
93: EX_LD(LOAD(ldd, %o1, %f2))
93: EX_LD_FP(LOAD(ldd, %o1, %f2))
add %o1, 8, %o1
subcc %g3, 8, %g3
faligndata %f0, %f2, %f8
EX_ST(STORE(std, %f8, %o0))
EX_ST_FP(STORE(std, %f8, %o0))
bl,pn %xcc, 95f
add %o0, 8, %o0
EX_LD(LOAD(ldd, %o1, %f0))
EX_LD_FP(LOAD(ldd, %o1, %f0))
add %o1, 8, %o1
subcc %g3, 8, %g3
faligndata %f2, %f0, %f8
EX_ST(STORE(std, %f8, %o0))
EX_ST_FP(STORE(std, %f8, %o0))
bge,pt %xcc, 93b
add %o0, 8, %o0
95: brz,pt %o2, 2f
mov %g1, %o1
1: EX_LD(LOAD(ldub, %o1, %o3))
1: EX_LD_FP(LOAD(ldub, %o1, %o3))
add %o1, 1, %o1
subcc %o2, 1, %o2
EX_ST(STORE(stb, %o3, %o0))
EX_ST_FP(STORE(stb, %o3, %o0))
bne,pt %xcc, 1b
add %o0, 1, %o0

8
arch/sparc/lib/U3copy_from_user.S
View File

@ -11,6 +11,14 @@
.text; \
.align 4;
#define EX_LD_FP(x) \
98: x; \
.section __ex_table,"a";\
.align 4; \
.word 98b, __retl_one_fp;\
.text; \
.align 4;
#define FUNC_NAME U3copy_from_user
#define LOAD(type,addr,dest) type##a [addr] %asi, dest
#define EX_RETVAL(x) 0

8
arch/sparc/lib/U3copy_to_user.S
View File

@ -11,6 +11,14 @@
.text; \
.align 4;
#define EX_ST_FP(x) \
98: x; \
.section __ex_table,"a";\
.align 4; \
.word 98b, __retl_one_fp;\
.text; \
.align 4;
#define FUNC_NAME U3copy_to_user
#define STORE(type,src,addr) type##a src, [addr] ASI_AIUS
#define STORE_BLK(src,addr) stda src, [addr] ASI_BLK_AIUS

86
arch/sparc/lib/U3memcpy.S
View File

@ -24,10 +24,16 @@
#ifndef EX_LD
#define EX_LD(x) x
#endif
#ifndef EX_LD_FP
#define EX_LD_FP(x) x
#endif
#ifndef EX_ST
#define EX_ST(x) x
#endif
#ifndef EX_ST_FP
#define EX_ST_FP(x) x
#endif
#ifndef EX_RETVAL
#define EX_RETVAL(x) x
@ -120,8 +126,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
and %g2, 0x38, %g2
1: subcc %g1, 0x1, %g1
EX_LD(LOAD(ldub, %o1 + 0x00, %o3))
EX_ST(STORE(stb, %o3, %o1 + GLOBAL_SPARE))
EX_LD_FP(LOAD(ldub, %o1 + 0x00, %o3))
EX_ST_FP(STORE(stb, %o3, %o1 + GLOBAL_SPARE))
bgu,pt %XCC, 1b
add %o1, 0x1, %o1
@ -132,20 +138,20 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
be,pt %icc, 3f
alignaddr %o1, %g0, %o1
EX_LD(LOAD(ldd, %o1, %f4))
1: EX_LD(LOAD(ldd, %o1 + 0x8, %f6))
EX_LD_FP(LOAD(ldd, %o1, %f4))
1: EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f6))
add %o1, 0x8, %o1
subcc %g2, 0x8, %g2
faligndata %f4, %f6, %f0
EX_ST(STORE(std, %f0, %o0))
EX_ST_FP(STORE(std, %f0, %o0))
be,pn %icc, 3f
add %o0, 0x8, %o0
EX_LD(LOAD(ldd, %o1 + 0x8, %f4))
EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f4))
add %o1, 0x8, %o1
subcc %g2, 0x8, %g2
faligndata %f6, %f4, %f2
EX_ST(STORE(std, %f2, %o0))
EX_ST_FP(STORE(std, %f2, %o0))
bne,pt %icc, 1b
add %o0, 0x8, %o0
@ -155,25 +161,25 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
LOAD(prefetch, %o1 + 0x080, #one_read)
LOAD(prefetch, %o1 + 0x0c0, #one_read)
LOAD(prefetch, %o1 + 0x100, #one_read)
EX_LD(LOAD(ldd, %o1 + 0x000, %f0))
EX_LD_FP(LOAD(ldd, %o1 + 0x000, %f0))
LOAD(prefetch, %o1 + 0x140, #one_read)
EX_LD(LOAD(ldd, %o1 + 0x008, %f2))
EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2))
LOAD(prefetch, %o1 + 0x180, #one_read)
EX_LD(LOAD(ldd, %o1 + 0x010, %f4))
EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4))
LOAD(prefetch, %o1 + 0x1c0, #one_read)
faligndata %f0, %f2, %f16
EX_LD(LOAD(ldd, %o1 + 0x018, %f6))
EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6))
faligndata %f2, %f4, %f18
EX_LD(LOAD(ldd, %o1 + 0x020, %f8))
EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8))
faligndata %f4, %f6, %f20
EX_LD(LOAD(ldd, %o1 + 0x028, %f10))
EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10))
faligndata %f6, %f8, %f22
EX_LD(LOAD(ldd, %o1 + 0x030, %f12))
EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12))
faligndata %f8, %f10, %f24
EX_LD(LOAD(ldd, %o1 + 0x038, %f14))
EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14))
faligndata %f10, %f12, %f26
EX_LD(LOAD(ldd, %o1 + 0x040, %f0))
EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0))
subcc GLOBAL_SPARE, 0x80, GLOBAL_SPARE
add %o1, 0x40, %o1
@ -184,26 +190,26 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
.align 64
1:
EX_LD(LOAD(ldd, %o1 + 0x008, %f2))
EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2))
faligndata %f12, %f14, %f28
EX_LD(LOAD(ldd, %o1 + 0x010, %f4))
EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4))
faligndata %f14, %f0, %f30
EX_ST(STORE_BLK(%f16, %o0))
EX_LD(LOAD(ldd, %o1 + 0x018, %f6))
EX_ST_FP(STORE_BLK(%f16, %o0))
EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6))
faligndata %f0, %f2, %f16
add %o0, 0x40, %o0
EX_LD(LOAD(ldd, %o1 + 0x020, %f8))
EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8))
faligndata %f2, %f4, %f18
EX_LD(LOAD(ldd, %o1 + 0x028, %f10))
EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10))
faligndata %f4, %f6, %f20
EX_LD(LOAD(ldd, %o1 + 0x030, %f12))
EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12))
subcc %o3, 0x01, %o3
faligndata %f6, %f8, %f22
EX_LD(LOAD(ldd, %o1 + 0x038, %f14))
EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14))
faligndata %f8, %f10, %f24
EX_LD(LOAD(ldd, %o1 + 0x040, %f0))
EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0))
LOAD(prefetch, %o1 + 0x1c0, #one_read)
faligndata %f10, %f12, %f26
bg,pt %XCC, 1b
@ -211,29 +217,29 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
/* Finally we copy the last full 64-byte block. */
2:
EX_LD(LOAD(ldd, %o1 + 0x008, %f2))
EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2))
faligndata %f12, %f14, %f28
EX_LD(LOAD(ldd, %o1 + 0x010, %f4))
EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4))
faligndata %f14, %f0, %f30
EX_ST(STORE_BLK(%f16, %o0))
EX_LD(LOAD(ldd, %o1 + 0x018, %f6))
EX_ST_FP(STORE_BLK(%f16, %o0))
EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6))
faligndata %f0, %f2, %f16
EX_LD(LOAD(ldd, %o1 + 0x020, %f8))
EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8))
faligndata %f2, %f4, %f18
EX_LD(LOAD(ldd, %o1 + 0x028, %f10))
EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10))
faligndata %f4, %f6, %f20
EX_LD(LOAD(ldd, %o1 + 0x030, %f12))
EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12))
faligndata %f6, %f8, %f22
EX_LD(LOAD(ldd, %o1 + 0x038, %f14))
EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14))
faligndata %f8, %f10, %f24
cmp %g1, 0
be,pt %XCC, 1f
add %o0, 0x40, %o0
EX_LD(LOAD(ldd, %o1 + 0x040, %f0))
EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0))
1: faligndata %f10, %f12, %f26
faligndata %f12, %f14, %f28
faligndata %f14, %f0, %f30
EX_ST(STORE_BLK(%f16, %o0))
EX_ST_FP(STORE_BLK(%f16, %o0))
add %o0, 0x40, %o0
add %o1, 0x40, %o1
membar #Sync
@ -253,20 +259,20 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */
sub %o2, %g2, %o2
be,a,pt %XCC, 1f
EX_LD(LOAD(ldd, %o1 + 0x00, %f0))
EX_LD_FP(LOAD(ldd, %o1 + 0x00, %f0))
1: EX_LD(LOAD(ldd, %o1 + 0x08, %f2))
1: EX_LD_FP(LOAD(ldd, %o1 + 0x08, %f2))
add %o1, 0x8, %o1
subcc %g2, 0x8, %g2
faligndata %f0, %f2, %f8
EX_ST(STORE(std, %f8, %o0))
EX_ST_FP(STORE(std, %f8, %o0))
be,pn %XCC, 2f
add %o0, 0x8, %o0
EX_LD(LOAD(ldd, %o1 + 0x08, %f0))
EX_LD_FP(LOAD(ldd, %o1 + 0x08, %f0))
add %o1, 0x8, %o1
subcc %g2, 0x8, %g2
faligndata %f2, %f0, %f8
EX_ST(STORE(std, %f8, %o0))
EX_ST_FP(STORE(std, %f8, %o0))
bne,pn %XCC, 1b
add %o0, 0x8, %o0