diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 471c6bc5f78f..1aa3e55c8b47 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -91,7 +91,6 @@ struct serial8250_config {
 #define UART_BUG_TXEN	BIT(1)	/* UART has buggy TX IIR status */
 #define UART_BUG_NOMSR	BIT(2)	/* UART has buggy MSR status bits (Au1x00) */
 #define UART_BUG_THRE	BIT(3)	/* UART has buggy THRE reassertion */
-#define UART_BUG_PARITY	BIT(4)	/* UART mishandles parity if FIFO enabled */
 #define UART_BUG_TXRACE	BIT(5)	/* UART Tx fails to set remote DR */
 
 
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index e80c4f6551a1..d2d547b5da95 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1232,14 +1232,6 @@ static int pci_oxsemi_tornado_setup(struct serial_private *priv,
 	return pci_default_setup(priv, board, up, idx);
 }
 
-static int pci_asix_setup(struct serial_private *priv,
-		  const struct pciserial_board *board,
-		  struct uart_8250_port *port, int idx)
-{
-	port->bugs |= UART_BUG_PARITY;
-	return pci_default_setup(priv, board, port, idx);
-}
-
 #define QPCR_TEST_FOR1		0x3F
 #define QPCR_TEST_GET1		0x00
 #define QPCR_TEST_FOR2		0x40
@@ -1955,7 +1947,6 @@ pci_moxa_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_WCH_CH355_4S	0x7173
 #define PCI_VENDOR_ID_AGESTAR		0x5372
 #define PCI_DEVICE_ID_AGESTAR_9375	0x6872
-#define PCI_VENDOR_ID_ASIX		0x9710
 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
 #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
 
@@ -2600,16 +2591,6 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
 		.exit		= pci_wch_ch38x_exit,
 		.setup          = pci_wch_ch38x_setup,
 	},
-	/*
-	 * ASIX devices with FIFO bug
-	 */
-	{
-		.vendor		= PCI_VENDOR_ID_ASIX,
-		.device		= PCI_ANY_ID,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_asix_setup,
-	},
 	/*
 	 * Broadcom TruManage (NetXtreme)
 	 */
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index dfb51a854e77..16aeb1420137 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2632,11 +2632,8 @@ static unsigned char serial8250_compute_lcr(struct uart_8250_port *up,
 
 	if (c_cflag & CSTOPB)
 		cval |= UART_LCR_STOP;
-	if (c_cflag & PARENB) {
+	if (c_cflag & PARENB)
 		cval |= UART_LCR_PARITY;
-		if (up->bugs & UART_BUG_PARITY)
-			up->fifo_bug = true;
-	}
 	if (!(c_cflag & PARODD))
 		cval |= UART_LCR_EPAR;
 	if (c_cflag & CMSPAR)
@@ -2799,8 +2796,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 	up->lcr = cval;					/* Save computed LCR */
 
 	if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
-		/* NOTE: If fifo_bug is not set, a user can set RX_trigger. */
-		if ((baud < 2400 && !up->dma) || up->fifo_bug) {
+		if (baud < 2400 && !up->dma) {
 			up->fcr &= ~UART_FCR_TRIGGER_MASK;
 			up->fcr |= UART_FCR_TRIGGER_1;
 		}
@@ -3131,8 +3127,7 @@ static int do_set_rxtrig(struct tty_port *port, unsigned char bytes)
 	struct uart_8250_port *up = up_to_u8250p(uport);
 	int rxtrig;
 
-	if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1 ||
-	    up->fifo_bug)
+	if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1)
 		return -EINVAL;
 
 	rxtrig = bytes_to_fcr_rxtrig(up, bytes);
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index eb44420b39ec..be65de65fe61 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -127,7 +127,6 @@ struct uart_8250_port {
 	struct list_head	list;		/* ports on this IRQ */
 	u32			capabilities;	/* port capabilities */
 	u16			bugs;		/* port bugs */
-	bool			fifo_bug;	/* min RX trigger if enabled */
 	unsigned int		tx_loadsz;	/* transmit fifo load size */
 	unsigned char		acr;
 	unsigned char		fcr;