ARM: dts: aspeed: Adding Facebook Bletchley BMC
Initial introduction of Facebook Bletchley equipped with Aspeed 2600 BMC SoC. Signed-off-by: Howard Chiu <howard.chiu@quantatw.com> Link: https://lore.kernel.org/r/20211207094923.422422-1-howard.chiu@quantatw.com Signed-off-by: Joel Stanley <joel@jms.id.au>
This commit is contained in:
parent
b26965e997
commit
a8c729e966
|
@ -1482,6 +1482,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
|
|||
aspeed-bmc-arm-stardragon4800-rep2.dtb \
|
||||
aspeed-bmc-asrock-e3c246d4i.dtb \
|
||||
aspeed-bmc-bytedance-g220a.dtb \
|
||||
aspeed-bmc-facebook-bletchley.dtb \
|
||||
aspeed-bmc-facebook-cloudripper.dtb \
|
||||
aspeed-bmc-facebook-cmm.dtb \
|
||||
aspeed-bmc-facebook-elbert.dtb \
|
||||
|
|
|
@ -0,0 +1,756 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
// Copyright (c) 2021 Facebook Inc.
|
||||
/dts-v1/;
|
||||
|
||||
#include "aspeed-g6.dtsi"
|
||||
#include <dt-bindings/gpio/aspeed-gpio.h>
|
||||
#include <dt-bindings/usb/pd.h>
|
||||
|
||||
/ {
|
||||
model = "Facebook Bletchley BMC";
|
||||
compatible = "facebook,bletchley-bmc", "aspeed,ast2600";
|
||||
|
||||
aliases {
|
||||
serial4 = &uart5;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS4,57600n8";
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x80000000>;
|
||||
};
|
||||
|
||||
iio-hwmon {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
|
||||
<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
|
||||
<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
|
||||
<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
|
||||
};
|
||||
|
||||
spi_gpio: spi-gpio {
|
||||
compatible = "spi-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
|
||||
gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
|
||||
gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
|
||||
num-chipselects = <1>;
|
||||
cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
|
||||
|
||||
tpmdev@0 {
|
||||
compatible = "tcg,tpm_tis-spi";
|
||||
spi-max-frequency = <33000000>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
switchphy: ethernet-phy@0 {
|
||||
// Fixed link
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
sys_log_id {
|
||||
retain-state-shutdown;
|
||||
default-state = "keep";
|
||||
gpios = <&front_leds 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
fan0_blue {
|
||||
retain-state-shutdown;
|
||||
default-state = "on";
|
||||
gpios = <&fan_ioexp 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
fan1_blue {
|
||||
retain-state-shutdown;
|
||||
default-state = "on";
|
||||
gpios = <&fan_ioexp 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
fan2_blue {
|
||||
retain-state-shutdown;
|
||||
default-state = "on";
|
||||
gpios = <&fan_ioexp 10 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
fan3_blue {
|
||||
retain-state-shutdown;
|
||||
default-state = "on";
|
||||
gpios = <&fan_ioexp 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
fan0_amber {
|
||||
retain-state-shutdown;
|
||||
default-state = "off";
|
||||
gpios = <&fan_ioexp 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
fan1_amber {
|
||||
retain-state-shutdown;
|
||||
default-state = "off";
|
||||
gpios = <&fan_ioexp 13 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
fan2_amber {
|
||||
retain-state-shutdown;
|
||||
default-state = "off";
|
||||
gpios = <&fan_ioexp 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
fan3_amber {
|
||||
retain-state-shutdown;
|
||||
default-state = "off";
|
||||
gpios = <&fan_ioexp 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
sled0_amber {
|
||||
retain-state-shutdown;
|
||||
default-state = "off";
|
||||
gpios = <&sled0_leds 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
sled0_blue {
|
||||
retain-state-shutdown;
|
||||
default-state = "off";
|
||||
gpios = <&sled0_leds 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
sled1_amber {
|
||||
retain-state-shutdown;
|
||||
default-state = "off";
|
||||
gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
sled1_blue {
|
||||
retain-state-shutdown;
|
||||
default-state = "off";
|
||||
gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
sled2_amber {
|
||||
retain-state-shutdown;
|
||||
default-state = "off";
|
||||
gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
sled2_blue {
|
||||
retain-state-shutdown;
|
||||
default-state = "off";
|
||||
gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
sled3_amber {
|
||||
retain-state-shutdown;
|
||||
default-state = "off";
|
||||
gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
sled3_blue {
|
||||
retain-state-shutdown;
|
||||
default-state = "off";
|
||||
gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
sled4_amber {
|
||||
retain-state-shutdown;
|
||||
default-state = "off";
|
||||
gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
sled4_blue {
|
||||
retain-state-shutdown;
|
||||
default-state = "off";
|
||||
gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
sled5_amber {
|
||||
retain-state-shutdown;
|
||||
default-state = "off";
|
||||
gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
sled5_blue {
|
||||
retain-state-shutdown;
|
||||
default-state = "off";
|
||||
gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mac2 {
|
||||
status = "okay";
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&switchphy>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rgmii3_default>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "bmc";
|
||||
spi-max-frequency = <50000000>;
|
||||
#include "openbmc-flash-layout-128.dtsi"
|
||||
};
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spi2_default>;
|
||||
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "pnor";
|
||||
spi-max-frequency = <100000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
/* TODO: Add ADC INA230 */
|
||||
|
||||
mp5023@40 {
|
||||
compatible = "mps,mp5023";
|
||||
reg = <0x40>;
|
||||
};
|
||||
|
||||
tmp421@4f {
|
||||
compatible = "ti,tmp421";
|
||||
reg = <0x4f>;
|
||||
};
|
||||
|
||||
sled0_ioexp: pca9539@76 {
|
||||
compatible = "nxp,pca9539";
|
||||
reg = <0x76>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
gpio-line-names =
|
||||
"SLED0_MS_DETECT1","SLED0_VBUS_BMC_EN","SLED0_INA230_ALERT","SLED0_P12V_STBY_ALERT",
|
||||
"SLED0_SSD_ALERT","SLED0_MS_DETECT0","SLED0_RST_CCG5","SLED0_FUSB302_INT",
|
||||
"SLED0_MD_STBY_RESET","SLED0_MD_IOEXP_EN_FAULT","SLED0_MD_DIR","SLED0_MD_DECAY",
|
||||
"SLED0_MD_MODE1","SLED0_MD_MODE2","SLED0_MD_MODE3","power-host0";
|
||||
};
|
||||
|
||||
sled0_leds: pca9552@67 {
|
||||
compatible = "nxp,pca9552";
|
||||
reg = <0x67>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
gpio-line-names =
|
||||
"led-sled0-amber","led-sled0-blue","SLED0_RST_IOEXP","",
|
||||
"","","","",
|
||||
"","","","",
|
||||
"","","","";
|
||||
};
|
||||
|
||||
sled0_fusb302: typec-portc@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
power-role = "dual";
|
||||
try-power-role = "sink";
|
||||
data-role = "dual";
|
||||
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
||||
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
|
||||
PDO_VAR(3000, 12000, 3000)
|
||||
PDO_PPS_APDO(3000, 11000, 3000)>;
|
||||
op-sink-microwatt = <10000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
/* TODO: Add ADC INA230 */
|
||||
|
||||
mp5023@40 {
|
||||
compatible = "mps,mp5023";
|
||||
reg = <0x40>;
|
||||
};
|
||||
|
||||
tmp421@4f {
|
||||
compatible = "ti,tmp421";
|
||||
reg = <0x4f>;
|
||||
};
|
||||
|
||||
sled1_ioexp: pca9539@76 {
|
||||
compatible = "nxp,pca9539";
|
||||
reg = <0x76>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
gpio-line-names =
|
||||
"SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
|
||||
"SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
|
||||
"SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
|
||||
"SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
|
||||
};
|
||||
|
||||
sled1_leds: pca9552@67 {
|
||||
compatible = "nxp,pca9552";
|
||||
reg = <0x67>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
gpio-line-names =
|
||||
"led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","",
|
||||
"","","","",
|
||||
"","","","",
|
||||
"","","","";
|
||||
};
|
||||
|
||||
sled1_fusb302: typec-portc@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
power-role = "dual";
|
||||
try-power-role = "sink";
|
||||
data-role = "dual";
|
||||
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
||||
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
|
||||
PDO_VAR(3000, 12000, 3000)
|
||||
PDO_PPS_APDO(3000, 11000, 3000)>;
|
||||
op-sink-microwatt = <10000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
/* TODO: Add ADC INA230 */
|
||||
|
||||
mp5023@40 {
|
||||
compatible = "mps,mp5023";
|
||||
reg = <0x40>;
|
||||
};
|
||||
|
||||
tmp421@4f {
|
||||
compatible = "ti,tmp421";
|
||||
reg = <0x4f>;
|
||||
};
|
||||
|
||||
sled2_ioexp: pca9539@76 {
|
||||
compatible = "nxp,pca9539";
|
||||
reg = <0x76>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
gpio-line-names =
|
||||
"SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
|
||||
"SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
|
||||
"SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
|
||||
"SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
|
||||
};
|
||||
|
||||
sled2_leds: pca9552@67 {
|
||||
compatible = "nxp,pca9552";
|
||||
reg = <0x67>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
gpio-line-names =
|
||||
"led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","",
|
||||
"","","","",
|
||||
"","","","",
|
||||
"","","","";
|
||||
};
|
||||
|
||||
sled2_fusb302: typec-portc@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
power-role = "dual";
|
||||
try-power-role = "sink";
|
||||
data-role = "dual";
|
||||
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
||||
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
|
||||
PDO_VAR(3000, 12000, 3000)
|
||||
PDO_PPS_APDO(3000, 11000, 3000)>;
|
||||
op-sink-microwatt = <10000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
/* TODO: Add ADC INA230 */
|
||||
|
||||
mp5023@40 {
|
||||
compatible = "mps,mp5023";
|
||||
reg = <0x40>;
|
||||
};
|
||||
|
||||
tmp421@4f {
|
||||
compatible = "ti,tmp421";
|
||||
reg = <0x4f>;
|
||||
};
|
||||
|
||||
sled3_ioexp: pca9539@76 {
|
||||
compatible = "nxp,pca9539";
|
||||
reg = <0x76>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
gpio-line-names =
|
||||
"SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
|
||||
"SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
|
||||
"SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
|
||||
"SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
|
||||
};
|
||||
|
||||
sled3_leds: pca9552@67 {
|
||||
compatible = "nxp,pca9552";
|
||||
reg = <0x67>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
gpio-line-names =
|
||||
"led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","",
|
||||
"","","","",
|
||||
"","","","",
|
||||
"","","","";
|
||||
};
|
||||
|
||||
sled3_fusb302: typec-portc@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
power-role = "dual";
|
||||
try-power-role = "sink";
|
||||
data-role = "dual";
|
||||
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
||||
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
|
||||
PDO_VAR(3000, 12000, 3000)
|
||||
PDO_PPS_APDO(3000, 11000, 3000)>;
|
||||
op-sink-microwatt = <10000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
/* TODO: Add ADC INA230 */
|
||||
|
||||
mp5023@40 {
|
||||
compatible = "mps,mp5023";
|
||||
reg = <0x40>;
|
||||
};
|
||||
|
||||
tmp421@4f {
|
||||
compatible = "ti,tmp421";
|
||||
reg = <0x4f>;
|
||||
};
|
||||
|
||||
sled4_ioexp: pca9539@76 {
|
||||
compatible = "nxp,pca9539";
|
||||
reg = <0x76>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
gpio-line-names =
|
||||
"SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
|
||||
"SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
|
||||
"SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
|
||||
"SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
|
||||
};
|
||||
|
||||
sled4_leds: pca9552@67 {
|
||||
compatible = "nxp,pca9552";
|
||||
reg = <0x67>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
gpio-line-names =
|
||||
"led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","",
|
||||
"","","","",
|
||||
"","","","",
|
||||
"","","","";
|
||||
};
|
||||
|
||||
sled4_fusb302: typec-portc@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
power-role = "dual";
|
||||
try-power-role = "sink";
|
||||
data-role = "dual";
|
||||
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
||||
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
|
||||
PDO_VAR(3000, 12000, 3000)
|
||||
PDO_PPS_APDO(3000, 11000, 3000)>;
|
||||
op-sink-microwatt = <10000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
/* TODO: Add ADC INA230 */
|
||||
|
||||
mp5023@40 {
|
||||
compatible = "mps,mp5023";
|
||||
reg = <0x40>;
|
||||
};
|
||||
|
||||
tmp421@4f {
|
||||
compatible = "ti,tmp421";
|
||||
reg = <0x4f>;
|
||||
};
|
||||
|
||||
sled5_ioexp: pca9539@76 {
|
||||
compatible = "nxp,pca9539";
|
||||
reg = <0x76>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
gpio-line-names =
|
||||
"SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
|
||||
"SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
|
||||
"SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
|
||||
"SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
|
||||
};
|
||||
|
||||
sled5_leds: pca9552@67 {
|
||||
compatible = "nxp,pca9552";
|
||||
reg = <0x67>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
gpio-line-names =
|
||||
"led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","",
|
||||
"","","","",
|
||||
"","","","",
|
||||
"","","","";
|
||||
};
|
||||
|
||||
sled5_fusb302: typec-portc@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
label = "USB-C";
|
||||
power-role = "dual";
|
||||
try-power-role = "sink";
|
||||
data-role = "dual";
|
||||
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
||||
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
|
||||
PDO_VAR(3000, 12000, 3000)
|
||||
PDO_PPS_APDO(3000, 11000, 3000)>;
|
||||
op-sink-microwatt = <10000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
|
||||
eeprom@56 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x56>;
|
||||
};
|
||||
|
||||
rtc@51 {
|
||||
compatible = "nxp,pcf85263";
|
||||
reg = <0x51>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
|
||||
eeprom@54 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x54>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c9 {
|
||||
status = "okay";
|
||||
|
||||
tmp421@4f {
|
||||
compatible = "ti,tmp421";
|
||||
reg = <0x4f>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c10 {
|
||||
status = "okay";
|
||||
|
||||
tmp421@4f {
|
||||
compatible = "ti,tmp421";
|
||||
reg = <0x4f>;
|
||||
};
|
||||
|
||||
hdc1080@40 {
|
||||
compatible = "ti,hdc1080";
|
||||
reg = <0x40>;
|
||||
};
|
||||
|
||||
front_leds: pca9552@67 {
|
||||
compatible = "nxp,pca9552";
|
||||
reg = <0x67>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
gpio-line-names =
|
||||
"led-fault-identify","power-p5v-stby-good",
|
||||
"power-p1v0-dvdd-good","power-p1v0-avdd-good",
|
||||
"","","","",
|
||||
"","","","",
|
||||
"","","","";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c12 {
|
||||
status = "okay";
|
||||
|
||||
adm1278@11 {
|
||||
compatible = "adi,adm1278";
|
||||
reg = <0x11>;
|
||||
};
|
||||
|
||||
tmp421@4c {
|
||||
compatible = "ti,tmp421";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
|
||||
tmp421@4d {
|
||||
compatible = "ti,tmp421";
|
||||
reg = <0x4d>;
|
||||
};
|
||||
|
||||
fan_ioexp: pca9552@67 {
|
||||
compatible = "nxp,pca9552";
|
||||
reg = <0x67>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
gpio-line-names =
|
||||
"presence-fan0","presence-fan1",
|
||||
"presence-fan2","presence-fan3",
|
||||
"power-fan0-good","power-fan1-good",
|
||||
"power-fan2-good","power-fan3-good",
|
||||
"","","","",
|
||||
"","","","";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c13 {
|
||||
multi-master;
|
||||
aspeed,hw-timeout-ms = <1000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
gpio-line-names =
|
||||
/*A0-A7*/ "","","","","","","","",
|
||||
/*B0-B7*/ "","","SEL_SPI2_MUX","SPI2_MUX1",
|
||||
"SPI2_MUX2","SPI2_MUX3","","",
|
||||
/*C0-C7*/ "","","","","","","","",
|
||||
/*D0-D7*/ "","","","","","","","",
|
||||
/*E0-E7*/ "","","","","","","","",
|
||||
/*F0-F7*/ "","","","","","","","",
|
||||
/*G0-G7*/ "","SWITCH_FRU_MUX","","","","","","",
|
||||
/*H0-H7*/ "presence-riser1","presence-riser2",
|
||||
"presence-sled0","presence-sled1",
|
||||
"presence-sled2","presence-sled3",
|
||||
"presence-sled4","presence-sled5",
|
||||
/*I0-I7*/ "REV_ID0","","REV_ID1","REV_ID2",
|
||||
"","","","",
|
||||
/*J0-J7*/ "","","","","","","","",
|
||||
/*K0-K7*/ "","","","","","","","",
|
||||
/*L0-L7*/ "","","","","","","","",
|
||||
/*M0-M7*/ "ALERT_SLED0","ALERT_SLED1",
|
||||
"ALERT_SLED2","ALERT_SLED3",
|
||||
"ALERT_SLED4","ALERT_SLED5",
|
||||
"P12V_AUX_ALERT1","",
|
||||
/*N0-N7*/ "","","","","","","","",
|
||||
/*O0-O7*/ "","","","",
|
||||
"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
|
||||
/*P0-P7*/ "","","","","","","","",
|
||||
/*Q0-Q7*/ "","","","","","","","",
|
||||
/*R0-R7*/ "","","","","","","","",
|
||||
/*S0-S7*/ "","","","BAT_DETECT",
|
||||
"BMC_BT_WP0","BMC_BT_WP1","","",
|
||||
/*T0-T7*/ "","","","","","","","",
|
||||
/*U0-U7*/ "","","","","","","","",
|
||||
/*V0-V7*/ "","RST_BMC_MVL","","",
|
||||
"USB2_SEL0_A","USB2_SEL1_A",
|
||||
"USB2_SEL0_B","USB2_SEL1_B",
|
||||
/*W0-W7*/ "RST_FRONT_IOEXP","","","","","","","",
|
||||
/*X0-X7*/ "","","","","","","","",
|
||||
/*Y0-Y7*/ "","","BSM_FLASH_LATCH","","","","","",
|
||||
/*Z0-Z7*/ "","","","","","","","";
|
||||
};
|
||||
|
||||
&adc0 {
|
||||
vref = <1800>;
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
|
||||
&pinctrl_adc2_default &pinctrl_adc3_default
|
||||
&pinctrl_adc4_default &pinctrl_adc5_default
|
||||
&pinctrl_adc6_default &pinctrl_adc7_default>;
|
||||
};
|
||||
|
||||
&adc1 {
|
||||
vref = <2500>;
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
|
||||
&pinctrl_adc10_default &pinctrl_adc11_default
|
||||
&pinctrl_adc12_default &pinctrl_adc13_default
|
||||
&pinctrl_adc14_default &pinctrl_adc15_default>;
|
||||
};
|
Loading…
Reference in New Issue