mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-12 13:55:32 +00:00
iio: light: opt3001: enable operation w/o IRQ
Enable operation of the TI OPT3001 light sensor without having an interrupt line available to connect the INT pin to. In this operation mode, we issue a conversion request and simply wait for the conversion time available as timeout value, determined from integration time configuration and the worst-case time given in the data sheet (sect. 6.5, table on p. 5): short integration time (100ms): 110ms + 3ms = 113ms long integration time (800ms): 880ms + 3ms = 883ms This change is transparent as behaviour defaults to using the interrupt method if an interrupt no. is configured via device tree. Interrupt-less operation mode is performed when no valid interrupt no. is given. Signed-off-by: Alexander Koch <mail@alexanderkoch.net> Signed-off-by: Michael Hornung <mhornung.linux@gmail.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
parent
84e8d090c5
commit
ac663db367
1 changed files with 95 additions and 42 deletions
|
@ -70,9 +70,12 @@
|
|||
|
||||
/*
|
||||
* Time to wait for conversion result to be ready. The device datasheet
|
||||
* worst-case max value is 880ms. Add some slack to be on the safe side.
|
||||
* sect. 6.5 states results are ready after total integration time plus 3ms.
|
||||
* This results in worst-case max values of 113ms or 883ms, respectively.
|
||||
* Add some slack to be on the safe side.
|
||||
*/
|
||||
#define OPT3001_RESULT_READY_TIMEOUT msecs_to_jiffies(1000)
|
||||
#define OPT3001_RESULT_READY_SHORT 150
|
||||
#define OPT3001_RESULT_READY_LONG 1000
|
||||
|
||||
struct opt3001 {
|
||||
struct i2c_client *client;
|
||||
|
@ -92,6 +95,8 @@ struct opt3001 {
|
|||
|
||||
u8 high_thresh_exp;
|
||||
u8 low_thresh_exp;
|
||||
|
||||
bool use_irq;
|
||||
};
|
||||
|
||||
struct opt3001_scale {
|
||||
|
@ -230,26 +235,30 @@ static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2)
|
|||
u16 reg;
|
||||
u8 exponent;
|
||||
u16 value;
|
||||
long timeout;
|
||||
|
||||
/*
|
||||
* Enable the end-of-conversion interrupt mechanism. Note that doing
|
||||
* so will overwrite the low-level limit value however we will restore
|
||||
* this value later on.
|
||||
*/
|
||||
ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_LOW_LIMIT,
|
||||
OPT3001_LOW_LIMIT_EOC_ENABLE);
|
||||
if (ret < 0) {
|
||||
dev_err(opt->dev, "failed to write register %02x\n",
|
||||
OPT3001_LOW_LIMIT);
|
||||
return ret;
|
||||
if (opt->use_irq) {
|
||||
/*
|
||||
* Enable the end-of-conversion interrupt mechanism. Note that
|
||||
* doing so will overwrite the low-level limit value however we
|
||||
* will restore this value later on.
|
||||
*/
|
||||
ret = i2c_smbus_write_word_swapped(opt->client,
|
||||
OPT3001_LOW_LIMIT,
|
||||
OPT3001_LOW_LIMIT_EOC_ENABLE);
|
||||
if (ret < 0) {
|
||||
dev_err(opt->dev, "failed to write register %02x\n",
|
||||
OPT3001_LOW_LIMIT);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Allow IRQ to access the device despite lock being set */
|
||||
opt->ok_to_ignore_lock = true;
|
||||
}
|
||||
|
||||
/* Reset data-ready indicator flag (will be set in the IRQ routine) */
|
||||
/* Reset data-ready indicator flag */
|
||||
opt->result_ready = false;
|
||||
|
||||
/* Allow IRQ to access the device despite lock being set */
|
||||
opt->ok_to_ignore_lock = true;
|
||||
|
||||
/* Configure for single-conversion mode and start a new conversion */
|
||||
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
|
||||
if (ret < 0) {
|
||||
|
@ -269,32 +278,69 @@ static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2)
|
|||
goto err;
|
||||
}
|
||||
|
||||
/* Wait for the IRQ to indicate the conversion is complete */
|
||||
ret = wait_event_timeout(opt->result_ready_queue, opt->result_ready,
|
||||
OPT3001_RESULT_READY_TIMEOUT);
|
||||
if (opt->use_irq) {
|
||||
/* Wait for the IRQ to indicate the conversion is complete */
|
||||
ret = wait_event_timeout(opt->result_ready_queue,
|
||||
opt->result_ready,
|
||||
msecs_to_jiffies(OPT3001_RESULT_READY_LONG));
|
||||
} else {
|
||||
/* Sleep for result ready time */
|
||||
timeout = (opt->int_time == OPT3001_INT_TIME_SHORT) ?
|
||||
OPT3001_RESULT_READY_SHORT : OPT3001_RESULT_READY_LONG;
|
||||
msleep(timeout);
|
||||
|
||||
/* Check result ready flag */
|
||||
ret = i2c_smbus_read_word_swapped(opt->client,
|
||||
OPT3001_CONFIGURATION);
|
||||
if (ret < 0) {
|
||||
dev_err(opt->dev, "failed to read register %02x\n",
|
||||
OPT3001_CONFIGURATION);
|
||||
goto err;
|
||||
}
|
||||
|
||||
if (!(ret & OPT3001_CONFIGURATION_CRF)) {
|
||||
ret = -ETIMEDOUT;
|
||||
goto err;
|
||||
}
|
||||
|
||||
/* Obtain value */
|
||||
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_RESULT);
|
||||
if (ret < 0) {
|
||||
dev_err(opt->dev, "failed to read register %02x\n",
|
||||
OPT3001_RESULT);
|
||||
goto err;
|
||||
}
|
||||
opt->result = ret;
|
||||
opt->result_ready = true;
|
||||
}
|
||||
|
||||
err:
|
||||
/* Disallow IRQ to access the device while lock is active */
|
||||
opt->ok_to_ignore_lock = false;
|
||||
if (opt->use_irq)
|
||||
/* Disallow IRQ to access the device while lock is active */
|
||||
opt->ok_to_ignore_lock = false;
|
||||
|
||||
if (ret == 0)
|
||||
return -ETIMEDOUT;
|
||||
else if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/*
|
||||
* Disable the end-of-conversion interrupt mechanism by restoring the
|
||||
* low-level limit value (clearing OPT3001_LOW_LIMIT_EOC_ENABLE). Note
|
||||
* that selectively clearing those enable bits would affect the actual
|
||||
* limit value due to bit-overlap and therefore can't be done.
|
||||
*/
|
||||
value = (opt->low_thresh_exp << 12) | opt->low_thresh_mantissa;
|
||||
ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_LOW_LIMIT,
|
||||
value);
|
||||
if (ret < 0) {
|
||||
dev_err(opt->dev, "failed to write register %02x\n",
|
||||
OPT3001_LOW_LIMIT);
|
||||
return ret;
|
||||
if (opt->use_irq) {
|
||||
/*
|
||||
* Disable the end-of-conversion interrupt mechanism by
|
||||
* restoring the low-level limit value (clearing
|
||||
* OPT3001_LOW_LIMIT_EOC_ENABLE). Note that selectively clearing
|
||||
* those enable bits would affect the actual limit value due to
|
||||
* bit-overlap and therefore can't be done.
|
||||
*/
|
||||
value = (opt->low_thresh_exp << 12) | opt->low_thresh_mantissa;
|
||||
ret = i2c_smbus_write_word_swapped(opt->client,
|
||||
OPT3001_LOW_LIMIT,
|
||||
value);
|
||||
if (ret < 0) {
|
||||
dev_err(opt->dev, "failed to write register %02x\n",
|
||||
OPT3001_LOW_LIMIT);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
exponent = OPT3001_REG_EXPONENT(opt->result);
|
||||
|
@ -736,12 +782,18 @@ static int opt3001_probe(struct i2c_client *client,
|
|||
return ret;
|
||||
}
|
||||
|
||||
ret = request_threaded_irq(irq, NULL, opt3001_irq,
|
||||
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
||||
"opt3001", iio);
|
||||
if (ret) {
|
||||
dev_err(dev, "failed to request IRQ #%d\n", irq);
|
||||
return ret;
|
||||
/* Make use of INT pin only if valid IRQ no. is given */
|
||||
if (irq > 0) {
|
||||
ret = request_threaded_irq(irq, NULL, opt3001_irq,
|
||||
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
||||
"opt3001", iio);
|
||||
if (ret) {
|
||||
dev_err(dev, "failed to request IRQ #%d\n", irq);
|
||||
return ret;
|
||||
}
|
||||
opt->use_irq = true;
|
||||
} else {
|
||||
dev_dbg(opt->dev, "enabling interrupt-less operation\n");
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
@ -754,7 +806,8 @@ static int opt3001_remove(struct i2c_client *client)
|
|||
int ret;
|
||||
u16 reg;
|
||||
|
||||
free_irq(client->irq, iio);
|
||||
if (opt->use_irq)
|
||||
free_irq(client->irq, iio);
|
||||
|
||||
ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION);
|
||||
if (ret < 0) {
|
||||
|
|
Loading…
Reference in a new issue