mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 08:19:28 +00:00
Blackfin: make EVT3->EVT5 lowering more robust wrt IPEND[4]
We handle many exceptions at EVT5 (hardware error level) so that we can catch exceptions in our exception handling code. Today - if the global interrupt enable bit (IPEND[4]) is set (interrupts disabled) our trap handling code goes into a infinite loop, since we need interrupts to be on to defer things to EVT5. Normal kernel code should not trigger this for any reason as IPEND[4] gets cleared early (when doing an interrupt context save) and the kernel stack there should be sane (or something much worse is happening in the system). But there have been a few times where this has happened, so this change makes sure we dump a proper crash message even when things have gone south. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This commit is contained in:
parent
d4b834c139
commit
ae4f073c40
4 changed files with 66 additions and 41 deletions
|
@ -50,6 +50,7 @@ struct blackfin_pda { /* Per-processor Data Area */
|
|||
unsigned long ex_optr;
|
||||
unsigned long ex_buf[4];
|
||||
unsigned long ex_imask; /* Saved imask from exception */
|
||||
unsigned long ex_ipend; /* Saved IPEND from exception */
|
||||
unsigned long *ex_stack; /* Exception stack space */
|
||||
|
||||
#ifdef ANOMALY_05000261
|
||||
|
|
|
@ -145,6 +145,7 @@ int main(void)
|
|||
DEFINE(PDA_EXBUF, offsetof(struct blackfin_pda, ex_buf));
|
||||
DEFINE(PDA_EXIMASK, offsetof(struct blackfin_pda, ex_imask));
|
||||
DEFINE(PDA_EXSTACK, offsetof(struct blackfin_pda, ex_stack));
|
||||
DEFINE(PDA_EXIPEND, offsetof(struct blackfin_pda, ex_ipend));
|
||||
#ifdef ANOMALY_05000261
|
||||
DEFINE(PDA_LFRETX, offsetof(struct blackfin_pda, last_cplb_fault_retx));
|
||||
#endif
|
||||
|
|
|
@ -267,11 +267,6 @@ asmlinkage void trap_c(struct pt_regs *fp)
|
|||
* double faults if the stack has become corrupt
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_KGDB
|
||||
/* IPEND is skipped if KGDB isn't enabled (see entry code) */
|
||||
fp->ipend = bfin_read_IPEND();
|
||||
#endif
|
||||
|
||||
/* trap_c() will be called for exceptions. During exceptions
|
||||
* processing, the pc value should be set with retx value.
|
||||
* With this change we can cleanup some code in signal.c- TODO
|
||||
|
@ -1116,10 +1111,16 @@ void show_regs(struct pt_regs *fp)
|
|||
|
||||
verbose_printk(KERN_NOTICE "%s", linux_banner);
|
||||
|
||||
verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n",
|
||||
print_tainted());
|
||||
verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n",
|
||||
(long)fp->seqstat, fp->ipend, fp->syscfg);
|
||||
verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n", print_tainted());
|
||||
verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx IMASK: %04lx SYSCFG: %04lx\n",
|
||||
(long)fp->seqstat, fp->ipend, cpu_pda[smp_processor_id()].ex_imask, fp->syscfg);
|
||||
if (fp->ipend & EVT_IRPTEN)
|
||||
verbose_printk(KERN_NOTICE " Global Interrupts Disabled (IPEND[4])\n");
|
||||
if (!(cpu_pda[smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 |
|
||||
EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR)))
|
||||
verbose_printk(KERN_NOTICE " Peripheral interrupts masked off\n");
|
||||
if (!(cpu_pda[smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14)))
|
||||
verbose_printk(KERN_NOTICE " Kernel interrupts masked off\n");
|
||||
if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
|
||||
verbose_printk(KERN_NOTICE " HWERRCAUSE: 0x%lx\n",
|
||||
(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
|
||||
|
|
|
@ -301,25 +301,31 @@ ENTRY(_ex_replaceable)
|
|||
nop;
|
||||
|
||||
ENTRY(_ex_trap_c)
|
||||
/* The only thing that has been saved in this context is
|
||||
* (R7:6,P5:4), ASTAT & SP - don't use anything else
|
||||
*/
|
||||
|
||||
GET_PDA(p5, r6);
|
||||
|
||||
/* Make sure we are not in a double fault */
|
||||
p4.l = lo(IPEND);
|
||||
p4.h = hi(IPEND);
|
||||
r7 = [p4];
|
||||
CC = BITTST (r7, 5);
|
||||
if CC jump _double_fault;
|
||||
[p5 + PDA_EXIPEND] = r7;
|
||||
|
||||
/* Call C code (trap_c) to handle the exception, which most
|
||||
* likely involves sending a signal to the current process.
|
||||
* To avoid double faults, lower our priority to IRQ5 first.
|
||||
*/
|
||||
P5.h = _exception_to_level5;
|
||||
P5.l = _exception_to_level5;
|
||||
r7.h = _exception_to_level5;
|
||||
r7.l = _exception_to_level5;
|
||||
p4.l = lo(EVT5);
|
||||
p4.h = hi(EVT5);
|
||||
[p4] = p5;
|
||||
[p4] = r7;
|
||||
csync;
|
||||
|
||||
GET_PDA(p5, r6);
|
||||
#ifndef CONFIG_DEBUG_DOUBLEFAULT
|
||||
|
||||
/*
|
||||
|
@ -349,8 +355,7 @@ ENTRY(_ex_trap_c)
|
|||
BITCLR(r6, SYSCFG_SSSTEP_P);
|
||||
SYSCFG = r6;
|
||||
|
||||
/* Disable all interrupts, but make sure level 5 is enabled so
|
||||
* we can switch to that level. Save the old mask. */
|
||||
/* Save the current IMASK, since we change in order to jump to level 5 */
|
||||
cli r6;
|
||||
[p5 + PDA_EXIMASK] = r6;
|
||||
|
||||
|
@ -358,9 +363,21 @@ ENTRY(_ex_trap_c)
|
|||
p4.h = hi(SAFE_USER_INSTRUCTION);
|
||||
retx = p4;
|
||||
|
||||
/* Disable all interrupts, but make sure level 5 is enabled so
|
||||
* we can switch to that level.
|
||||
*/
|
||||
r6 = 0x3f;
|
||||
sti r6;
|
||||
|
||||
/* In case interrupts are disabled IPEND[4] (global interrupt disable bit)
|
||||
* clear it (re-enabling interrupts again) by the special sequence of pushing
|
||||
* RETI onto the stack. This way we can lower ourselves to IVG5 even if the
|
||||
* exception was taken after the interrupt handler was called but before it
|
||||
* got a chance to enable global interrupts itself.
|
||||
*/
|
||||
[--sp] = reti;
|
||||
sp += 4;
|
||||
|
||||
raise 5;
|
||||
jump.s _bfin_return_from_exception;
|
||||
ENDPROC(_ex_trap_c)
|
||||
|
@ -420,47 +437,52 @@ ENDPROC(_double_fault)
|
|||
ENTRY(_exception_to_level5)
|
||||
SAVE_ALL_SYS
|
||||
|
||||
GET_PDA(p4, r7); /* Fetch current PDA */
|
||||
r6 = [p4 + PDA_RETX];
|
||||
GET_PDA(p5, r7); /* Fetch current PDA */
|
||||
r6 = [p5 + PDA_RETX];
|
||||
[sp + PT_PC] = r6;
|
||||
|
||||
r6 = [p4 + PDA_SYSCFG];
|
||||
r6 = [p5 + PDA_SYSCFG];
|
||||
[sp + PT_SYSCFG] = r6;
|
||||
|
||||
/* Restore interrupt mask. We haven't pushed RETI, so this
|
||||
* doesn't enable interrupts until we return from this handler. */
|
||||
r6 = [p4 + PDA_EXIMASK];
|
||||
sti r6;
|
||||
|
||||
/* Restore the hardware error vector. */
|
||||
P5.h = _evt_ivhw;
|
||||
P5.l = _evt_ivhw;
|
||||
r7.h = _evt_ivhw;
|
||||
r7.l = _evt_ivhw;
|
||||
p4.l = lo(EVT5);
|
||||
p4.h = hi(EVT5);
|
||||
[p4] = p5;
|
||||
[p4] = r7;
|
||||
csync;
|
||||
|
||||
p2.l = lo(IPEND);
|
||||
p2.h = hi(IPEND);
|
||||
csync;
|
||||
r0 = [p2]; /* Read current IPEND */
|
||||
[sp + PT_IPEND] = r0; /* Store IPEND */
|
||||
#ifdef CONFIG_DEBUG_DOUBLEFAULT
|
||||
/* Now that we have the hardware error vector programmed properly
|
||||
* we can re-enable interrupts (IPEND[4]), so if the _trap_c causes
|
||||
* another hardware error, we can catch it (self-nesting).
|
||||
*/
|
||||
[--sp] = reti;
|
||||
sp += 4;
|
||||
#endif
|
||||
|
||||
r7 = [p5 + PDA_EXIPEND] /* Read the IPEND from the Exception state */
|
||||
[sp + PT_IPEND] = r7; /* Store IPEND onto the stack */
|
||||
|
||||
r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */
|
||||
SP += -12;
|
||||
call _trap_c;
|
||||
SP += 12;
|
||||
|
||||
#ifdef CONFIG_DEBUG_DOUBLEFAULT
|
||||
/* Grab ILAT */
|
||||
p2.l = lo(ILAT);
|
||||
p2.h = hi(ILAT);
|
||||
r0 = [p2];
|
||||
r1 = 0x20; /* Did I just cause anther HW error? */
|
||||
r0 = r0 & r1;
|
||||
CC = R0 == R1;
|
||||
if CC JUMP _double_fault;
|
||||
#endif
|
||||
/* If interrupts were off during the exception (IPEND[4] = 1), turn them off
|
||||
* before we return.
|
||||
*/
|
||||
CC = BITTST(r7, EVT_IRPTEN_P)
|
||||
if !CC jump 1f;
|
||||
/* this will load a random value into the reti register - but that is OK,
|
||||
* since we do restore it to the correct value in the 'RESTORE_ALL_SYS' macro
|
||||
*/
|
||||
sp += -4;
|
||||
reti = [sp++];
|
||||
1:
|
||||
/* restore the interrupt mask (IMASK) */
|
||||
r6 = [p5 + PDA_EXIMASK];
|
||||
sti r6;
|
||||
|
||||
call _ret_from_exception;
|
||||
RESTORE_ALL_SYS
|
||||
|
|
Loading…
Reference in a new issue