KVM: arm/arm64: Avoid timer save/restore in vcpu entry/exit

We don't need to save and restore the hardware timer state and examine
if it generates interrupts on on every entry/exit to the guest.  The
timer hardware is perfectly capable of telling us when it has expired
by signaling interrupts.

When taking a vtimer interrupt in the host, we don't want to mess with
the timer configuration, we just want to forward the physical interrupt
to the guest as a virtual interrupt.  We can use the split priority drop
and deactivate feature of the GIC to do this, which leaves an EOI'ed
interrupt active on the physical distributor, making sure we don't keep
taking timer interrupts which would prevent the guest from running.  We
can then forward the physical interrupt to the VM using the HW bit in
the LR of the GIC, like we do already, which lets the guest directly
deactivate both the physical and virtual timer simultaneously, allowing
the timer hardware to exit the VM and generate a new physical interrupt
when the timer output is again asserted later on.

We do need to capture this state when migrating VCPUs between physical
CPUs, however, which we use the vcpu put/load functions for, which are
called through preempt notifiers whenever the thread is scheduled away
from the CPU or called directly if we return from the ioctl to
userspace.

One caveat is that we have to save and restore the timer state in both
kvm_timer_vcpu_[put/load] and kvm_timer_[schedule/unschedule], because
we can have the following flows:

  1. kvm_vcpu_block
  2. kvm_timer_schedule
  3. schedule
  4. kvm_timer_vcpu_put (preempt notifier)
  5. schedule (vcpu thread gets scheduled back)
  6. kvm_timer_vcpu_load (preempt notifier)
  7. kvm_timer_unschedule

And a version where we don't actually call schedule:

  1. kvm_vcpu_block
  2. kvm_timer_schedule
  7. kvm_timer_unschedule

Since kvm_timer_[schedule/unschedule] may not be followed by put/load,
but put/load also may be called independently, we call the timer
save/restore functions from both paths.  Since they rely on the loaded
flag to never save/restore when unnecessary, this doesn't cause any
harm, and we ensure that all invokations of either set of functions work
as intended.

An added benefit beyond not having to read and write the timer sysregs
on every entry and exit is that we no longer have to actively write the
active state to the physical distributor, because we configured the
irq for the vtimer to only get a priority drop when handling the
interrupt in the GIC driver (we called irq_set_vcpu_affinity()), and
the interrupt stays active after firing on the host.

Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
This commit is contained in:
Christoffer Dall 2016-10-16 20:30:38 +02:00 committed by Christoffer Dall
parent 40f4cba9a5
commit b103cc3f10
3 changed files with 178 additions and 94 deletions

View File

@ -31,8 +31,15 @@ struct arch_timer_context {
/* Timer IRQ */
struct kvm_irq_level irq;
/* Active IRQ state caching */
bool active_cleared_last;
/*
* We have multiple paths which can save/restore the timer state
* onto the hardware, so we need some way of keeping track of
* where the latest state is.
*
* loaded == true: State is loaded on the hardware registers.
* loaded == false: State is stored in memory.
*/
bool loaded;
/* Virtual offset */
u64 cntvoff;
@ -78,10 +85,15 @@ void kvm_timer_unschedule(struct kvm_vcpu *vcpu);
u64 kvm_phys_timer_read(void);
void kvm_timer_vcpu_load(struct kvm_vcpu *vcpu);
void kvm_timer_vcpu_put(struct kvm_vcpu *vcpu);
void kvm_timer_init_vhe(void);
#define vcpu_vtimer(v) (&(v)->arch.timer_cpu.vtimer)
#define vcpu_ptimer(v) (&(v)->arch.timer_cpu.ptimer)
void enable_el1_phys_timer_access(void);
void disable_el1_phys_timer_access(void);
#endif

View File

@ -46,10 +46,9 @@ static const struct kvm_irq_level default_vtimer_irq = {
.level = 1,
};
void kvm_timer_vcpu_put(struct kvm_vcpu *vcpu)
{
vcpu_vtimer(vcpu)->active_cleared_last = false;
}
static bool kvm_timer_irq_can_fire(struct arch_timer_context *timer_ctx);
static void kvm_timer_update_irq(struct kvm_vcpu *vcpu, bool new_level,
struct arch_timer_context *timer_ctx);
u64 kvm_phys_timer_read(void)
{
@ -69,17 +68,45 @@ static void soft_timer_cancel(struct hrtimer *hrt, struct work_struct *work)
cancel_work_sync(work);
}
static void kvm_vtimer_update_mask_user(struct kvm_vcpu *vcpu)
{
struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
/*
* When using a userspace irqchip with the architected timers, we must
* prevent continuously exiting from the guest, and therefore mask the
* physical interrupt by disabling it on the host interrupt controller
* when the virtual level is high, such that the guest can make
* forward progress. Once we detect the output level being
* de-asserted, we unmask the interrupt again so that we exit from the
* guest when the timer fires.
*/
if (vtimer->irq.level)
disable_percpu_irq(host_vtimer_irq);
else
enable_percpu_irq(host_vtimer_irq, 0);
}
static irqreturn_t kvm_arch_timer_handler(int irq, void *dev_id)
{
struct kvm_vcpu *vcpu = *(struct kvm_vcpu **)dev_id;
struct arch_timer_context *vtimer;
if (!vcpu) {
pr_warn_once("Spurious arch timer IRQ on non-VCPU thread\n");
return IRQ_NONE;
}
vtimer = vcpu_vtimer(vcpu);
if (!vtimer->irq.level) {
vtimer->cnt_ctl = read_sysreg_el0(cntv_ctl);
if (kvm_timer_irq_can_fire(vtimer))
kvm_timer_update_irq(vcpu, true, vtimer);
}
if (unlikely(!irqchip_in_kernel(vcpu->kvm)))
kvm_vtimer_update_mask_user(vcpu);
/*
* We disable the timer in the world switch and let it be
* handled by kvm_timer_sync_hwstate(). Getting a timer
* interrupt at this point is a sure sign of some major
* breakage.
*/
pr_warn("Unexpected interrupt %d on vcpu %p\n", irq, vcpu);
return IRQ_HANDLED;
}
@ -215,7 +242,6 @@ static void kvm_timer_update_irq(struct kvm_vcpu *vcpu, bool new_level,
{
int ret;
timer_ctx->active_cleared_last = false;
timer_ctx->irq.level = new_level;
trace_kvm_timer_update_irq(vcpu->vcpu_id, timer_ctx->irq.irq,
timer_ctx->irq.level);
@ -271,10 +297,16 @@ static void phys_timer_emulate(struct kvm_vcpu *vcpu,
soft_timer_start(&timer->phys_timer, kvm_timer_compute_delta(timer_ctx));
}
static void timer_save_state(struct kvm_vcpu *vcpu)
static void vtimer_save_state(struct kvm_vcpu *vcpu)
{
struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
unsigned long flags;
local_irq_save(flags);
if (!vtimer->loaded)
goto out;
if (timer->enabled) {
vtimer->cnt_ctl = read_sysreg_el0(cntv_ctl);
@ -283,6 +315,10 @@ static void timer_save_state(struct kvm_vcpu *vcpu)
/* Disable the virtual timer */
write_sysreg_el0(0, cntv_ctl);
vtimer->loaded = false;
out:
local_irq_restore(flags);
}
/*
@ -296,6 +332,8 @@ void kvm_timer_schedule(struct kvm_vcpu *vcpu)
struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
struct arch_timer_context *ptimer = vcpu_ptimer(vcpu);
vtimer_save_state(vcpu);
/*
* No need to schedule a background timer if any guest timer has
* already expired, because kvm_vcpu_block will return before putting
@ -318,22 +356,34 @@ void kvm_timer_schedule(struct kvm_vcpu *vcpu)
soft_timer_start(&timer->bg_timer, kvm_timer_earliest_exp(vcpu));
}
static void timer_restore_state(struct kvm_vcpu *vcpu)
static void vtimer_restore_state(struct kvm_vcpu *vcpu)
{
struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
unsigned long flags;
local_irq_save(flags);
if (vtimer->loaded)
goto out;
if (timer->enabled) {
write_sysreg_el0(vtimer->cnt_cval, cntv_cval);
isb();
write_sysreg_el0(vtimer->cnt_ctl, cntv_ctl);
}
vtimer->loaded = true;
out:
local_irq_restore(flags);
}
void kvm_timer_unschedule(struct kvm_vcpu *vcpu)
{
struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
vtimer_restore_state(vcpu);
soft_timer_cancel(&timer->bg_timer, &timer->expired);
}
@ -352,61 +402,45 @@ static void set_cntvoff(u64 cntvoff)
kvm_call_hyp(__kvm_timer_set_cntvoff, low, high);
}
static void kvm_timer_flush_hwstate_vgic(struct kvm_vcpu *vcpu)
static void kvm_timer_vcpu_load_vgic(struct kvm_vcpu *vcpu)
{
struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
bool phys_active;
int ret;
/*
* If we enter the guest with the virtual input level to the VGIC
* asserted, then we have already told the VGIC what we need to, and
* we don't need to exit from the guest until the guest deactivates
* the already injected interrupt, so therefore we should set the
* hardware active state to prevent unnecessary exits from the guest.
*
* Also, if we enter the guest with the virtual timer interrupt active,
* then it must be active on the physical distributor, because we set
* the HW bit and the guest must be able to deactivate the virtual and
* physical interrupt at the same time.
*
* Conversely, if the virtual input level is deasserted and the virtual
* interrupt is not active, then always clear the hardware active state
* to ensure that hardware interrupts from the timer triggers a guest
* exit.
*/
phys_active = vtimer->irq.level ||
kvm_vgic_map_is_active(vcpu, vtimer->irq.irq);
/*
* We want to avoid hitting the (re)distributor as much as
* possible, as this is a potentially expensive MMIO access
* (not to mention locks in the irq layer), and a solution for
* this is to cache the "active" state in memory.
*
* Things to consider: we cannot cache an "active set" state,
* because the HW can change this behind our back (it becomes
* "clear" in the HW). We must then restrict the caching to
* the "clear" state.
*
* The cache is invalidated on:
* - vcpu put, indicating that the HW cannot be trusted to be
* in a sane state on the next vcpu load,
* - any change in the interrupt state
*
* Usage conditions:
* - cached value is "active clear"
* - value to be programmed is "active clear"
*/
if (vtimer->active_cleared_last && !phys_active)
return;
kvm_vgic_map_is_active(vcpu, vtimer->irq.irq);
ret = irq_set_irqchip_state(host_vtimer_irq,
IRQCHIP_STATE_ACTIVE,
phys_active);
WARN_ON(ret);
}
vtimer->active_cleared_last = !phys_active;
static void kvm_timer_vcpu_load_user(struct kvm_vcpu *vcpu)
{
kvm_vtimer_update_mask_user(vcpu);
}
void kvm_timer_vcpu_load(struct kvm_vcpu *vcpu)
{
struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
if (unlikely(!timer->enabled))
return;
if (unlikely(!irqchip_in_kernel(vcpu->kvm)))
kvm_timer_vcpu_load_user(vcpu);
else
kvm_timer_vcpu_load_vgic(vcpu);
set_cntvoff(vtimer->cntvoff);
vtimer_restore_state(vcpu);
if (has_vhe())
disable_el1_phys_timer_access();
}
bool kvm_timer_should_notify_user(struct kvm_vcpu *vcpu)
@ -426,23 +460,6 @@ bool kvm_timer_should_notify_user(struct kvm_vcpu *vcpu)
ptimer->irq.level != plevel;
}
static void kvm_timer_flush_hwstate_user(struct kvm_vcpu *vcpu)
{
struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
/*
* To prevent continuously exiting from the guest, we mask the
* physical interrupt such that the guest can make forward progress.
* Once we detect the output level being deasserted, we unmask the
* interrupt again so that we exit from the guest when the timer
* fires.
*/
if (vtimer->irq.level)
disable_percpu_irq(host_vtimer_irq);
else
enable_percpu_irq(host_vtimer_irq, 0);
}
/**
* kvm_timer_flush_hwstate - prepare timers before running the vcpu
* @vcpu: The vcpu pointer
@ -455,23 +472,61 @@ static void kvm_timer_flush_hwstate_user(struct kvm_vcpu *vcpu)
void kvm_timer_flush_hwstate(struct kvm_vcpu *vcpu)
{
struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
struct arch_timer_context *ptimer = vcpu_ptimer(vcpu);
if (unlikely(!timer->enabled))
return;
kvm_timer_update_state(vcpu);
if (kvm_timer_should_fire(ptimer) != ptimer->irq.level)
kvm_timer_update_irq(vcpu, !ptimer->irq.level, ptimer);
/* Set the background timer for the physical timer emulation. */
phys_timer_emulate(vcpu, vcpu_ptimer(vcpu));
}
if (unlikely(!irqchip_in_kernel(vcpu->kvm)))
kvm_timer_flush_hwstate_user(vcpu);
else
kvm_timer_flush_hwstate_vgic(vcpu);
void kvm_timer_vcpu_put(struct kvm_vcpu *vcpu)
{
struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
set_cntvoff(vtimer->cntvoff);
timer_restore_state(vcpu);
if (unlikely(!timer->enabled))
return;
if (has_vhe())
enable_el1_phys_timer_access();
vtimer_save_state(vcpu);
/*
* The kernel may decide to run userspace after calling vcpu_put, so
* we reset cntvoff to 0 to ensure a consistent read between user
* accesses to the virtual counter and kernel access to the physical
* counter.
*/
set_cntvoff(0);
}
static void unmask_vtimer_irq(struct kvm_vcpu *vcpu)
{
struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
if (unlikely(!irqchip_in_kernel(vcpu->kvm))) {
kvm_vtimer_update_mask_user(vcpu);
return;
}
/*
* If the guest disabled the timer without acking the interrupt, then
* we must make sure the physical and virtual active states are in
* sync by deactivating the physical interrupt, because otherwise we
* wouldn't see the next timer interrupt in the host.
*/
if (!kvm_vgic_map_is_active(vcpu, vtimer->irq.irq)) {
int ret;
ret = irq_set_irqchip_state(host_vtimer_irq,
IRQCHIP_STATE_ACTIVE,
false);
WARN_ON(ret);
}
}
/**
@ -484,6 +539,7 @@ void kvm_timer_flush_hwstate(struct kvm_vcpu *vcpu)
void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu)
{
struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
/*
* This is to cancel the background timer for the physical timer
@ -491,14 +547,19 @@ void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu)
*/
soft_timer_cancel(&timer->phys_timer, NULL);
timer_save_state(vcpu);
set_cntvoff(0);
/*
* The guest could have modified the timer registers or the timer
* could have expired, update the timer state.
* If we entered the guest with the vtimer output asserted we have to
* check if the guest has modified the timer so that we should lower
* the line at this point.
*/
kvm_timer_update_state(vcpu);
if (vtimer->irq.level) {
vtimer->cnt_ctl = read_sysreg_el0(cntv_ctl);
vtimer->cnt_cval = read_sysreg_el0(cntv_cval);
if (!kvm_timer_should_fire(vtimer)) {
kvm_timer_update_irq(vcpu, false, vtimer);
unmask_vtimer_irq(vcpu);
}
}
}
int kvm_timer_vcpu_reset(struct kvm_vcpu *vcpu)

View File

@ -354,18 +354,18 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
vcpu->arch.host_cpu_context = this_cpu_ptr(kvm_host_cpu_state);
kvm_arm_set_running_vcpu(vcpu);
kvm_vgic_load(vcpu);
kvm_timer_vcpu_load(vcpu);
}
void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
{
kvm_timer_vcpu_put(vcpu);
kvm_vgic_put(vcpu);
vcpu->cpu = -1;
kvm_arm_set_running_vcpu(NULL);
kvm_timer_vcpu_put(vcpu);
}
static void vcpu_power_off(struct kvm_vcpu *vcpu)
@ -710,15 +710,26 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
kvm_arm_clear_debug(vcpu);
/*
* We must sync the PMU and timer state before the vgic state so
* We must sync the PMU state before the vgic state so
* that the vgic can properly sample the updated state of the
* interrupt line.
*/
kvm_pmu_sync_hwstate(vcpu);
kvm_timer_sync_hwstate(vcpu);
/*
* Sync the vgic state before syncing the timer state because
* the timer code needs to know if the virtual timer
* interrupts are active.
*/
kvm_vgic_sync_hwstate(vcpu);
/*
* Sync the timer hardware state before enabling interrupts as
* we don't want vtimer interrupts to race with syncing the
* timer virtual interrupt state.
*/
kvm_timer_sync_hwstate(vcpu);
/*
* We may have taken a host interrupt in HYP mode (ie
* while executing the guest). This interrupt is still