diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c
index e10ae94cf771..5ccb1a3a149d 100644
--- a/drivers/net/dsa/realtek/rtl8366rb.c
+++ b/drivers/net/dsa/realtek/rtl8366rb.c
@@ -185,7 +185,12 @@
 #define RTL8366RB_LED_BLINKRATE_222MS		0x0004
 #define RTL8366RB_LED_BLINKRATE_446MS		0x0005
 
+/* LED trigger event for each group */
 #define RTL8366RB_LED_CTRL_REG			0x0431
+#define RTL8366RB_LED_CTRL_OFFSET(led_group)	\
+	(4 * (led_group))
+#define RTL8366RB_LED_CTRL_MASK(led_group)	\
+	(0xf << RTL8366RB_LED_CTRL_OFFSET(led_group))
 #define RTL8366RB_LED_OFF			0x0
 #define RTL8366RB_LED_DUP_COL			0x1
 #define RTL8366RB_LED_LINK_ACT			0x2
@@ -202,6 +207,11 @@
 #define RTL8366RB_LED_LINK_TX			0xd
 #define RTL8366RB_LED_MASTER			0xe
 #define RTL8366RB_LED_FORCE			0xf
+
+/* The RTL8366RB_LED_X_X registers are used to manually set the LED state only
+ * when the corresponding LED group in RTL8366RB_LED_CTRL_REG is
+ * RTL8366RB_LED_FORCE. Otherwise, it is ignored.
+ */
 #define RTL8366RB_LED_0_1_CTRL_REG		0x0432
 #define RTL8366RB_LED_1_OFFSET			6
 #define RTL8366RB_LED_2_3_CTRL_REG		0x0433
@@ -1001,28 +1011,20 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
 	 */
 	if (priv->leds_disabled) {
 		/* Turn everything off */
-		regmap_update_bits(priv->map,
-				   RTL8366RB_LED_0_1_CTRL_REG,
-				   0x0FFF, 0);
-		regmap_update_bits(priv->map,
-				   RTL8366RB_LED_2_3_CTRL_REG,
-				   0x0FFF, 0);
 		regmap_update_bits(priv->map,
 				   RTL8366RB_INTERRUPT_CONTROL_REG,
 				   RTL8366RB_P4_RGMII_LED,
 				   0);
-		val = RTL8366RB_LED_OFF;
-	} else {
-		/* TODO: make this configurable per LED */
-		val = RTL8366RB_LED_FORCE;
-	}
-	for (i = 0; i < 4; i++) {
-		ret = regmap_update_bits(priv->map,
-					 RTL8366RB_LED_CTRL_REG,
-					 0xf << (i * 4),
-					 val << (i * 4));
-		if (ret)
-			return ret;
+
+		for (i = 0; i < RTL8366RB_NUM_LEDGROUPS; i++) {
+			val = RTL8366RB_LED_OFF << RTL8366RB_LED_CTRL_OFFSET(i);
+			ret = regmap_update_bits(priv->map,
+						 RTL8366RB_LED_CTRL_REG,
+						 RTL8366RB_LED_CTRL_MASK(i),
+						 val);
+			if (ret)
+				return ret;
+		}
 	}
 
 	ret = rtl8366_reset_vlan(priv);
@@ -1167,52 +1169,6 @@ rtl8366rb_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
 	}
 }
 
-static void rb8366rb_set_port_led(struct realtek_priv *priv,
-				  int port, bool enable)
-{
-	u16 val = enable ? 0x3f : 0;
-	int ret;
-
-	if (priv->leds_disabled)
-		return;
-
-	switch (port) {
-	case 0:
-		ret = regmap_update_bits(priv->map,
-					 RTL8366RB_LED_0_1_CTRL_REG,
-					 0x3F, val);
-		break;
-	case 1:
-		ret = regmap_update_bits(priv->map,
-					 RTL8366RB_LED_0_1_CTRL_REG,
-					 0x3F << RTL8366RB_LED_1_OFFSET,
-					 val << RTL8366RB_LED_1_OFFSET);
-		break;
-	case 2:
-		ret = regmap_update_bits(priv->map,
-					 RTL8366RB_LED_2_3_CTRL_REG,
-					 0x3F, val);
-		break;
-	case 3:
-		ret = regmap_update_bits(priv->map,
-					 RTL8366RB_LED_2_3_CTRL_REG,
-					 0x3F << RTL8366RB_LED_3_OFFSET,
-					 val << RTL8366RB_LED_3_OFFSET);
-		break;
-	case 4:
-		ret = regmap_update_bits(priv->map,
-					 RTL8366RB_INTERRUPT_CONTROL_REG,
-					 RTL8366RB_P4_RGMII_LED,
-					 enable ? RTL8366RB_P4_RGMII_LED : 0);
-		break;
-	default:
-		dev_err(priv->dev, "no LED for port %d\n", port);
-		return;
-	}
-	if (ret)
-		dev_err(priv->dev, "error updating LED on port %d\n", port);
-}
-
 static int
 rtl8366rb_port_enable(struct dsa_switch *ds, int port,
 		      struct phy_device *phy)
@@ -1226,7 +1182,6 @@ rtl8366rb_port_enable(struct dsa_switch *ds, int port,
 	if (ret)
 		return ret;
 
-	rb8366rb_set_port_led(priv, port, true);
 	return 0;
 }
 
@@ -1241,8 +1196,6 @@ rtl8366rb_port_disable(struct dsa_switch *ds, int port)
 				 BIT(port));
 	if (ret)
 		return;
-
-	rb8366rb_set_port_led(priv, port, false);
 }
 
 static int