clk: ti: move generic OMAP DPLL implementation under drivers/clk

With the legacy clock data now gone, we can start moving OMAP clock
type implementations under clock driver. Start this with moving the
generic OMAP DPLL clock type under TI clock driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

arch/arm/mach-omap2/Makefile

@@ -13,7 +13,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
 hwmod-common				= omap_hwmod.o omap_hwmod_reset.o \
 					  omap_hwmod_common_data.o
 clock-common				= clock.o clock_common_data.o \
-					  clkt_dpll.o clkt_clksel.o
+					  clkt_clksel.o
 secure-common				= omap-smc.o omap-secure.o
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)

drivers/clk/ti/Makefile

@@ -1,6 +1,7 @@
 obj-y					+= clk.o autoidle.o clockdomain.o
 clk-common				= dpll.o composite.o divider.o gate.o \
-					  fixed-factor.o mux.o apll.o
+					  fixed-factor.o mux.o apll.o \
+					  clkt_dpll.o
 obj-$(CONFIG_SOC_AM33XX)		+= $(clk-common) clk-33xx.o
 obj-$(CONFIG_SOC_TI81XX)		+= $(clk-common) fapll.o clk-816x.o
 obj-$(CONFIG_ARCH_OMAP2)		+= $(clk-common) interface.o clk-2xxx.o

drivers/clk/ti/clkt_dpll.c

@@ -18,6 +18,7 @@
 #include <linux/errno.h>
 #include <linux/clk-provider.h>
 #include <linux/io.h>
+#include <linux/clk/ti.h>
 
 #include <asm/div64.h>
 
@@ -211,7 +212,7 @@ u8 omap2_init_dpll_parent(struct clk_hw *hw)
 	if (!dd)
 		return -EINVAL;
 
-	v = omap2_clk_readl(clk, dd->control_reg);
+	v = ti_clk_ll_ops->clk_readl(dd->control_reg);
 	v &= dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 
@@ -247,20 +248,20 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
 		return 0;
 
 	/* Return bypass rate if DPLL is bypassed */
-	v = omap2_clk_readl(clk, dd->control_reg);
+	v = ti_clk_ll_ops->clk_readl(dd->control_reg);
 	v &= dd->enable_mask;
 	v >>= __ffs(dd->enable_mask);
 
 	if (_omap2_dpll_is_in_bypass(v))
 		return __clk_get_rate(dd->clk_bypass);
 
-	v = omap2_clk_readl(clk, dd->mult_div1_reg);
+	v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg);
 	dpll_mult = v & dd->mult_mask;
 	dpll_mult >>= __ffs(dd->mult_mask);
 	dpll_div = v & dd->div1_mask;
 	dpll_div >>= __ffs(dd->div1_mask);
 
-	dpll_clk = (long long) __clk_get_rate(dd->clk_ref) * dpll_mult;
+	dpll_clk = (long long)__clk_get_rate(dd->clk_ref) * dpll_mult;
 	do_div(dpll_clk, dpll_div + 1);
 
 	return dpll_clk;
@@ -281,7 +282,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
  * be rounded, or the rounded rate upon success.
  */
 long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
-		unsigned long *parent_rate)
+			   unsigned long *parent_rate)
 {
 	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
 	int m, n, r, scaled_max_m;
@@ -310,7 +311,6 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
 	dd->last_rounded_rate = 0;
 
 	for (n = dd->min_divider; n <= dd->max_divider; n++) {
-
 		/* Is the (input clk, divider) pair valid for the DPLL? */
 		r = _dpll_test_fint(clk, n);
 		if (r == DPLL_FINT_UNDERFLOW)
@@ -367,4 +367,3 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
 
 	return dd->last_rounded_rate;
 }
-

drivers/clk/ti/clock.h

@@ -169,4 +169,6 @@ void ti_clk_patch_legacy_clks(struct ti_clk **patch);
 struct clk *ti_clk_register_clk(struct ti_clk *setup);
 int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
 
+u8 omap2_init_dpll_parent(struct clk_hw *hw);
+
 #endif

include/linux/clk/ti.h

@@ -286,7 +286,6 @@ long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
 					unsigned long max_rate,
 					unsigned long *best_parent_rate,
 					struct clk_hw **best_parent_clk);
-u8 omap2_init_dpll_parent(struct clk_hw *hw);
 unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
 long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
 			   unsigned long *parent_rate);