h8300: remove stale bindings and symlink

These four files are left over from the h8300 removal.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2022-05-20 22:40:56 +02:00
parent 678e9c3a93
commit b2441b3bdc
4 changed files with 0 additions and 74 deletions

View File

@ -1,23 +0,0 @@
Renesas H8S2678 PLL clock
This device is Clock multiplyer
Required Properties:
- compatible: Must be "renesas,h8s2678-pll-clock"
- clocks: Reference to the parent clocks
- #clock-cells: Must be 0
- reg: Two rate selector (Multiply / Divide) register address
Example
-------
pllclk: pllclk {
compatible = "renesas,h8s2678-pll-clock";
clocks = <&xclk>;
#clock-cells = <0>;
reg = <0xfee03b 2>, <0xfee045 2>;
};

View File

@ -1,25 +0,0 @@
* Renesas H8/300 16bit timer
The 16bit timer is a 16bit timer/counter with configurable clock inputs and
programmable compare match.
Required Properties:
- compatible: must contain "renesas,16bit-timer"
- reg: base address and length of the registers block for the timer module.
- interrupts: interrupt-specifier for the timer, IMIA
- clocks: a list of phandle, one for each entry in clock-names.
- clock-names: must contain "peripheral_clk" for the functional clock.
- renesas,channel: timer channel number.
Example:
timer16: timer@ffff68 {
compatible = "reneas,16bit-timer";
reg = <0xffff68 8>, <0xffff60 8>;
interrupts = <24>;
renesas,channel = <0>;
clocks = <&pclk>;
clock-names = "peripheral_clk";
};

View File

@ -1,25 +0,0 @@
* Renesas H8/300 8bit timer
The 8bit timer is a 8bit timer/counter with configurable clock inputs and
programmable compare match.
This implement only supported cascade mode.
Required Properties:
- compatible: must contain "renesas,8bit-timer"
- reg: base address and length of the registers block for the timer module.
- interrupts: interrupt-specifier for the timer, CMIA and TOVI
- clocks: a list of phandle, one for each entry in clock-names.
- clock-names: must contain "fck" for the functional clock.
Example:
timer8_0: timer@ffff80 {
compatible = "renesas,8bit-timer";
reg = <0xffff80 10>;
interrupts = <36>;
clocks = <&fclk>;
clock-names = "fck";
};

View File

@ -1 +0,0 @@
../../../arch/h8300/boot/dts