[media] flexcop-usb: don't use stack for DMA

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.

While here, remove a dead function calling usb_control_msg().

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit is contained in:
Mauro Carvalho Chehab 2016-10-10 07:55:54 -03:00
parent b5f93cb513
commit b430eaba0b
2 changed files with 72 additions and 37 deletions

View File

@ -73,23 +73,34 @@ static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI,
u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR;
u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) |
(read ? 0x80 : 0);
int ret;
int len = usb_control_msg(fc_usb->udev,
mutex_lock(&fc_usb->data_mutex);
if (!read)
memcpy(fc_usb->data, val, sizeof(*val));
ret = usb_control_msg(fc_usb->udev,
read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT,
request,
request_type, /* 0xc0 read or 0x40 write */
wAddress,
0,
val,
fc_usb->data,
sizeof(u32),
B2C2_WAIT_FOR_OPERATION_RDW * HZ);
if (len != sizeof(u32)) {
if (ret != sizeof(u32)) {
err("error while %s dword from %d (%d).", read ? "reading" :
"writing", wAddress, wRegOffsPCI);
return -EIO;
if (ret >= 0)
ret = -EIO;
}
return 0;
if (read && ret >= 0)
memcpy(val, fc_usb->data, sizeof(*val));
mutex_unlock(&fc_usb->data_mutex);
return ret;
}
/*
* DKT 010817 - add support for V8 memory read/write and flash update
@ -100,9 +111,14 @@ static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb,
{
u8 request_type = USB_TYPE_VENDOR;
u16 wIndex;
int nWaitTime, pipe, len;
int nWaitTime, pipe, ret;
wIndex = page << 8;
if (buflen > sizeof(fc_usb->data)) {
err("Buffer size bigger than max URB control message\n");
return -EIO;
}
switch (req) {
case B2C2_USB_READ_V8_MEM:
nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ;
@ -127,17 +143,32 @@ static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb,
deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n", request_type, req,
wAddress, wIndex, buflen);
len = usb_control_msg(fc_usb->udev, pipe,
mutex_lock(&fc_usb->data_mutex);
if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)
memcpy(fc_usb->data, pbBuffer, buflen);
ret = usb_control_msg(fc_usb->udev, pipe,
req,
request_type,
wAddress,
wIndex,
pbBuffer,
fc_usb->data,
buflen,
nWaitTime * HZ);
if (ret != buflen)
ret = -EIO;
debug_dump(pbBuffer, len, deb_v8);
return len == buflen ? 0 : -EIO;
if (ret >= 0) {
ret = 0;
if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
memcpy(pbBuffer, fc_usb->data, buflen);
}
mutex_unlock(&fc_usb->data_mutex);
debug_dump(pbBuffer, ret, deb_v8);
return ret;
}
#define bytes_left_to_read_on_page(paddr,buflen) \
@ -196,29 +227,6 @@ static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended)
fc->dvb_adapter.proposed_mac, 6);
}
#if 0
static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set,
flexcop_usb_utility_function_t func, u8 extra, u16 wIndex,
u16 buflen, u8 *pvBuffer)
{
u16 wValue;
u8 request_type = (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR;
int nWaitTime = 2,
pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN, len;
wValue = (func << 8) | extra;
len = usb_control_msg(fc_usb->udev,pipe,
B2C2_USB_UTILITY,
request_type,
wValue,
wIndex,
pvBuffer,
buflen,
nWaitTime * HZ);
return len == buflen ? 0 : -EIO;
}
#endif
/* usb i2c stuff */
static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c,
flexcop_usb_request_t req, flexcop_usb_i2c_function_t func,
@ -226,9 +234,14 @@ static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c,
{
struct flexcop_usb *fc_usb = i2c->fc->bus_specific;
u16 wValue, wIndex;
int nWaitTime,pipe,len;
int nWaitTime, pipe, ret;
u8 request_type = USB_TYPE_VENDOR;
if (buflen > sizeof(fc_usb->data)) {
err("Buffer size bigger than max URB control message\n");
return -EIO;
}
switch (func) {
case USB_FUNC_I2C_WRITE:
case USB_FUNC_I2C_MULTIWRITE:
@ -257,15 +270,32 @@ static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c,
wValue & 0xff, wValue >> 8,
wIndex & 0xff, wIndex >> 8);
len = usb_control_msg(fc_usb->udev,pipe,
mutex_lock(&fc_usb->data_mutex);
if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)
memcpy(fc_usb->data, buf, buflen);
ret = usb_control_msg(fc_usb->udev, pipe,
req,
request_type,
wValue,
wIndex,
buf,
fc_usb->data,
buflen,
nWaitTime * HZ);
return len == buflen ? 0 : -EREMOTEIO;
if (ret != buflen)
ret = -EIO;
if (ret >= 0) {
ret = 0;
if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
memcpy(buf, fc_usb->data, buflen);
}
mutex_unlock(&fc_usb->data_mutex);
return 0;
}
/* actual bus specific access functions,
@ -516,6 +546,7 @@ static int flexcop_usb_probe(struct usb_interface *intf,
/* general flexcop init */
fc_usb = fc->bus_specific;
fc_usb->fc_dev = fc;
mutex_init(&fc_usb->data_mutex);
fc->read_ibi_reg = flexcop_usb_read_ibi_reg;
fc->write_ibi_reg = flexcop_usb_write_ibi_reg;

View File

@ -29,6 +29,10 @@ struct flexcop_usb {
u8 tmp_buffer[1023+190];
int tmp_buffer_length;
/* for URB control messages */
u8 data[80];
struct mutex data_mutex;
};
#if 0