mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity

ARM: dts: Augment panel setting for Integrator/CP 

This adds the actual VGA DAC bridge that is used in the
Versatile AB, and sets the mode to 640x480 VGA and
routes the CLCD pads appropriately.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Linus Walleij 2018-01-29 14:28:59 +01:00
parent bfeffd1552
commit b724cad74c
1 changed files with 57 additions and 32 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

89
arch/arm/boot/dts/integratorcp.dts
View File

@ -192,6 +192,43 @@
interrupts = <27>;
};
bridge {
compatible = "ti,ths8134a", "ti,ths8134";
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
vga_bridge_in: endpoint {
remote-endpoint = <&clcd_pads_vga_dac>;
};
};
port@1 {
reg = <1>;
vga_bridge_out: endpoint {
remote-endpoint = <&vga_con_in>;
};
};
};
};
vga {
compatible = "vga-connector";
port {
vga_con_in: endpoint {
remote-endpoint = <&vga_bridge_out>;
};
};
};
fpga {
/*
* These PrimeCells are at the same location and using
@ -254,39 +291,27 @@
interrupts = <22>;
clocks = <&auxosc>, <&pclk>;
clock-names = "clcdclk", "apb_pclk";
/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
max-memory-bandwidth = <40000000>;
port {
/*
* The VGA connected is implemented with a
* THS8134A triple DAC that can be run in 24bit
* or 16bit RGB mode.
*/
clcd_pads: endpoint {
remote-endpoint = <&clcd_panel>;
arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
};
};
panel {
compatible = "panel-dpi";
port {
clcd_panel: endpoint {
remote-endpoint = <&clcd_pads>;
};
};
/* Standard 640x480 VGA timings */
panel-timing {
clock-frequency = <25175000>;
hactive = <640>;
hback-porch = <48>;
hfront-porch = <16>;
hsync-len = <96>;
vactive = <480>;
vback-porch = <33>;
vfront-porch = <10>;
vsync-len = <2>;
/*
* This port is routed through a PLD (Programmable
* Logic Device) that routes the output from the CLCD
* (after transformations) to the VGA DAC and also an
* external panel connector. The PLD is essential for
* supporting RGB565/BGR565.
*
* The signals from the port thus reaches two endpoints.
* The PLD is managed through a few special bits in the
* FPGA "sysreg".
*
* This arrangement can be clearly seen in
* ARM DUI 0225D, page 3-41, figure 3-19.
*/
port@0 {
clcd_pads_vga_dac: endpoint {
remote-endpoint = <&vga_bridge_in>;
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
};