Merge branch 'master' into for-next

Sync with Linus' tree to be able to apply pending patches that
are based on newer code already present upstream.

CREDITS

@@ -518,7 +518,7 @@ N: Zach Brown
 E: zab@zabbo.net
 D: maestro pci sound
 
-M: David Brownell
+N: David Brownell
 D: Kernel engineer, mentor, and friend.  Maintained USB EHCI and
 D: gadget layers, SPI subsystem, GPIO subsystem, and more than a few
 D: device drivers.  His encouragement also helped many engineers get

Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870

@@ -0,0 +1,56 @@
+What:		/sys/class/backlight/<backlight>/<ambient light zone>_max
+What:		/sys/class/backlight/<backlight>/l1_daylight_max
+What:		/sys/class/backlight/<backlight>/l2_bright_max
+What:		/sys/class/backlight/<backlight>/l3_office_max
+What:		/sys/class/backlight/<backlight>/l4_indoor_max
+What:		/sys/class/backlight/<backlight>/l5_dark_max
+Date:		Mai 2011
+KernelVersion:	2.6.40
+Contact:	device-drivers-devel@blackfin.uclinux.org
+Description:
+		Control the maximum brightness for <ambient light zone>
+		on this <backlight>. Values are between 0 and 127. This file
+		will also show the brightness level stored for this
+		<ambient light zone>.
+
+What:		/sys/class/backlight/<backlight>/<ambient light zone>_dim
+What:		/sys/class/backlight/<backlight>/l2_bright_dim
+What:		/sys/class/backlight/<backlight>/l3_office_dim
+What:		/sys/class/backlight/<backlight>/l4_indoor_dim
+What:		/sys/class/backlight/<backlight>/l5_dark_dim
+Date:		Mai 2011
+KernelVersion:	2.6.40
+Contact:	device-drivers-devel@blackfin.uclinux.org
+Description:
+		Control the dim brightness for <ambient light zone>
+		on this <backlight>. Values are between 0 and 127, typically
+		set to 0. Full off when the backlight is disabled.
+		This file will also show the dim brightness level stored for
+		this <ambient light zone>.
+
+What:		/sys/class/backlight/<backlight>/ambient_light_level
+Date:		Mai 2011
+KernelVersion:	2.6.40
+Contact:	device-drivers-devel@blackfin.uclinux.org
+Description:
+		Get conversion value of the light sensor.
+		This value is updated every 80 ms (when the light sensor
+		is enabled). Returns integer between 0 (dark) and
+		8000 (max ambient brightness)
+
+What:		/sys/class/backlight/<backlight>/ambient_light_zone
+Date:		Mai 2011
+KernelVersion:	2.6.40
+Contact:	device-drivers-devel@blackfin.uclinux.org
+Description:
+		Get/Set current ambient light zone. Reading returns
+		integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark).
+		Writing a value between 1..5 forces the backlight controller
+		to enter the corresponding ambient light zone.
+		Writing 0 returns to normal/automatic ambient light level
+		operation. The ambient light sensing feature on these devices
+		is an extension to the API documented in
+		Documentation/ABI/stable/sysfs-class-backlight.
+		It can be enabled by writing the value stored in
+		/sys/class/backlight/<backlight>/max_brightness to
+		/sys/class/backlight/<backlight>/brightness.

Documentation/CodingStyle

@@ -680,8 +680,8 @@ ones already enabled by DEBUG.
 		Chapter 14: Allocating memory
 
 The kernel provides the following general purpose memory allocators:
-kmalloc(), kzalloc(), kcalloc(), and vmalloc().  Please refer to the API
+kmalloc(), kzalloc(), kcalloc(), vmalloc(), and vzalloc().  Please refer to
-documentation for further information about them.
+the API documentation for further information about them.
 
 The preferred form for passing a size of a struct is the following:
 

Documentation/accounting/cgroupstats.txt

@@ -21,7 +21,7 @@ information will not be available.
 To extract cgroup statistics a utility very similar to getdelays.c
 has been developed, the sample output of the utility is shown below
 
-~/balbir/cgroupstats # ./getdelays  -C "/cgroup/a"
+~/balbir/cgroupstats # ./getdelays  -C "/sys/fs/cgroup/a"
 sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0
-~/balbir/cgroupstats # ./getdelays  -C "/cgroup"
+~/balbir/cgroupstats # ./getdelays  -C "/sys/fs/cgroup"
 sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2

Documentation/cgroups/blkio-controller.txt

@@ -28,16 +28,19 @@ cgroups. Here is what you can do.
 - Enable group scheduling in CFQ
 	CONFIG_CFQ_GROUP_IOSCHED=y
 
-- Compile and boot into kernel and mount IO controller (blkio).
+- Compile and boot into kernel and mount IO controller (blkio); see
+  cgroups.txt, Why are cgroups needed?.
 
-	mount -t cgroup -o blkio none /cgroup
+	mount -t tmpfs cgroup_root /sys/fs/cgroup
+	mkdir /sys/fs/cgroup/blkio
+	mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
 
 - Create two cgroups
-	mkdir -p /cgroup/test1/ /cgroup/test2
+	mkdir -p /sys/fs/cgroup/blkio/test1/ /sys/fs/cgroup/blkio/test2
 
 - Set weights of group test1 and test2
-	echo 1000 > /cgroup/test1/blkio.weight
+	echo 1000 > /sys/fs/cgroup/blkio/test1/blkio.weight
-	echo 500 > /cgroup/test2/blkio.weight
+	echo 500 > /sys/fs/cgroup/blkio/test2/blkio.weight
 
 - Create two same size files (say 512MB each) on same disk (file1, file2) and
   launch two dd threads in different cgroup to read those files.
@@ -46,12 +49,12 @@ cgroups. Here is what you can do.
 	echo 3 > /proc/sys/vm/drop_caches
 
 	dd if=/mnt/sdb/zerofile1 of=/dev/null &
-	echo $! > /cgroup/test1/tasks
+	echo $! > /sys/fs/cgroup/blkio/test1/tasks
-	cat /cgroup/test1/tasks
+	cat /sys/fs/cgroup/blkio/test1/tasks
 
 	dd if=/mnt/sdb/zerofile2 of=/dev/null &
-	echo $! > /cgroup/test2/tasks
+	echo $! > /sys/fs/cgroup/blkio/test2/tasks
-	cat /cgroup/test2/tasks
+	cat /sys/fs/cgroup/blkio/test2/tasks
 
 - At macro level, first dd should finish first. To get more precise data, keep
   on looking at (with the help of script), at blkio.disk_time and
@@ -68,13 +71,13 @@ Throttling/Upper Limit policy
 - Enable throttling in block layer
 	CONFIG_BLK_DEV_THROTTLING=y
 
-- Mount blkio controller
+- Mount blkio controller (see cgroups.txt, Why are cgroups needed?)
-        mount -t cgroup -o blkio none /cgroup/blkio
+        mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
 
 - Specify a bandwidth rate on particular device for root group. The format
   for policy is "<major>:<minor>  <byes_per_second>".
 
-        echo "8:16  1048576" > /cgroup/blkio/blkio.read_bps_device
+        echo "8:16  1048576" > /sys/fs/cgroup/blkio/blkio.throttle.read_bps_device
 
   Above will put a limit of 1MB/second on reads happening for root group
   on device having major/minor number 8:16.
@@ -87,7 +90,7 @@ Throttling/Upper Limit policy
         1024+0 records out
         4194304 bytes (4.2 MB) copied, 4.0001 s, 1.0 MB/s
 
- Limits for writes can be put using blkio.write_bps_device file.
+ Limits for writes can be put using blkio.throttle.write_bps_device file.
 
 Hierarchical Cgroups
 ====================
@@ -108,7 +111,7 @@ Hierarchical Cgroups
   CFQ and throttling will practically treat all groups at same level.
 
 				pivot
-			     /  |   \  \
+			     /  /   \  \
 			root  test1 test2  test3
 
   Down the line we can implement hierarchical accounting/control support
@@ -149,7 +152,7 @@ Proportional weight policy files
 
 	  Following is the format.
 
-	  #echo dev_maj:dev_minor weight > /path/to/cgroup/blkio.weight_device
+	  # echo dev_maj:dev_minor weight > blkio.weight_device
 	  Configure weight=300 on /dev/sdb (8:16) in this cgroup
 	  # echo 8:16 300 > blkio.weight_device
 	  # cat blkio.weight_device
@@ -283,28 +286,28 @@ Throttling/Upper limit policy files
 	  specified in bytes per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.read_bps_device
+  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device
 
 - blkio.throttle.write_bps_device
 	- Specifies upper limit on WRITE rate to the device. IO rate is
 	  specified in bytes per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.write_bps_device
+  echo "<major>:<minor>  <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device
 
 - blkio.throttle.read_iops_device
 	- Specifies upper limit on READ rate from the device. IO rate is
 	  specified in IO per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.read_iops_device
+  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device
 
 - blkio.throttle.write_iops_device
 	- Specifies upper limit on WRITE rate to the device. IO rate is
 	  specified in io per second. Rules are per deivce. Following is
 	  the format.
 
-  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.write_iops_device
+  echo "<major>:<minor>  <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device
 
 Note: If both BW and IOPS rules are specified for a device, then IO is
       subjectd to both the constraints.

Documentation/cgroups/cgroups.txt

@@ -138,11 +138,11 @@ With the ability to classify tasks differently for different resources
 the admin can easily set up a script which receives exec notifications
 and depending on who is launching the browser he can
 
-       # echo browser_pid > /mnt/<restype>/<userclass>/tasks
+    # echo browser_pid > /sys/fs/cgroup/<restype>/<userclass>/tasks
 
 With only a single hierarchy, he now would potentially have to create
 a separate cgroup for every browser launched and associate it with
-approp network and other resource class.  This may lead to
+appropriate network and other resource class.  This may lead to
 proliferation of such cgroups.
 
 Also lets say that the administrator would like to give enhanced network
@@ -153,9 +153,9 @@ apps enhanced CPU power,
 With ability to write pids directly to resource classes, it's just a
 matter of :
 
-       # echo pid > /mnt/network/<new_class>/tasks
+       # echo pid > /sys/fs/cgroup/network/<new_class>/tasks
        (after some time)
-       # echo pid > /mnt/network/<orig_class>/tasks
+       # echo pid > /sys/fs/cgroup/network/<orig_class>/tasks
 
 Without this ability, he would have to split the cgroup into
 multiple separate ones and then associate the new cgroups with the
@@ -310,21 +310,24 @@ subsystem, this is the case for the cpuset.
 To start a new job that is to be contained within a cgroup, using
 the "cpuset" cgroup subsystem, the steps are something like:
 
- 1) mkdir /dev/cgroup
+ 1) mount -t tmpfs cgroup_root /sys/fs/cgroup
- 2) mount -t cgroup -ocpuset cpuset /dev/cgroup
+ 2) mkdir /sys/fs/cgroup/cpuset
- 3) Create the new cgroup by doing mkdir's and write's (or echo's) in
+ 3) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
-    the /dev/cgroup virtual file system.
+ 4) Create the new cgroup by doing mkdir's and write's (or echo's) in
- 4) Start a task that will be the "founding father" of the new job.
+    the /sys/fs/cgroup virtual file system.
- 5) Attach that task to the new cgroup by writing its pid to the
+ 5) Start a task that will be the "founding father" of the new job.
-    /dev/cgroup tasks file for that cgroup.
+ 6) Attach that task to the new cgroup by writing its pid to the
- 6) fork, exec or clone the job tasks from this founding father task.
+    /sys/fs/cgroup/cpuset/tasks file for that cgroup.
+ 7) fork, exec or clone the job tasks from this founding father task.
 
 For example, the following sequence of commands will setup a cgroup
 named "Charlie", containing just CPUs 2 and 3, and Memory Node 1,
 and then start a subshell 'sh' in that cgroup:
 
-  mount -t cgroup cpuset -ocpuset /dev/cgroup
+  mount -t tmpfs cgroup_root /sys/fs/cgroup
-  cd /dev/cgroup
+  mkdir /sys/fs/cgroup/cpuset
+  mount -t cgroup cpuset -ocpuset /sys/fs/cgroup/cpuset
+  cd /sys/fs/cgroup/cpuset
   mkdir Charlie
   cd Charlie
   /bin/echo 2-3 > cpuset.cpus
@@ -345,7 +348,7 @@ Creating, modifying, using the cgroups can be done through the cgroup
 virtual filesystem.
 
 To mount a cgroup hierarchy with all available subsystems, type:
-# mount -t cgroup xxx /dev/cgroup
+# mount -t cgroup xxx /sys/fs/cgroup
 
 The "xxx" is not interpreted by the cgroup code, but will appear in
 /proc/mounts so may be any useful identifying string that you like.
@@ -354,23 +357,32 @@ Note: Some subsystems do not work without some user input first.  For instance,
 if cpusets are enabled the user will have to populate the cpus and mems files
 for each new cgroup created before that group can be used.
 
+As explained in section `1.2 Why are cgroups needed?' you should create
+different hierarchies of cgroups for each single resource or group of
+resources you want to control. Therefore, you should mount a tmpfs on
+/sys/fs/cgroup and create directories for each cgroup resource or resource
+group.
+
+# mount -t tmpfs cgroup_root /sys/fs/cgroup
+# mkdir /sys/fs/cgroup/rg1
+
 To mount a cgroup hierarchy with just the cpuset and memory
 subsystems, type:
-# mount -t cgroup -o cpuset,memory hier1 /dev/cgroup
+# mount -t cgroup -o cpuset,memory hier1 /sys/fs/cgroup/rg1
 
 To change the set of subsystems bound to a mounted hierarchy, just
 remount with different options:
-# mount -o remount,cpuset,blkio hier1 /dev/cgroup
+# mount -o remount,cpuset,blkio hier1 /sys/fs/cgroup/rg1
 
 Now memory is removed from the hierarchy and blkio is added.
 
 Note this will add blkio to the hierarchy but won't remove memory or
 cpuset, because the new options are appended to the old ones:
-# mount -o remount,blkio /dev/cgroup
+# mount -o remount,blkio /sys/fs/cgroup/rg1
 
 To Specify a hierarchy's release_agent:
 # mount -t cgroup -o cpuset,release_agent="/sbin/cpuset_release_agent" \
-  xxx /dev/cgroup
+  xxx /sys/fs/cgroup/rg1
 
 Note that specifying 'release_agent' more than once will return failure.
 
@@ -379,17 +391,17 @@ when the hierarchy consists of a single (root) cgroup. Supporting
 the ability to arbitrarily bind/unbind subsystems from an existing
 cgroup hierarchy is intended to be implemented in the future.
 
-Then under /dev/cgroup you can find a tree that corresponds to the
+Then under /sys/fs/cgroup/rg1 you can find a tree that corresponds to the
-tree of the cgroups in the system. For instance, /dev/cgroup
+tree of the cgroups in the system. For instance, /sys/fs/cgroup/rg1
 is the cgroup that holds the whole system.
 
 If you want to change the value of release_agent:
-# echo "/sbin/new_release_agent" > /dev/cgroup/release_agent
+# echo "/sbin/new_release_agent" > /sys/fs/cgroup/rg1/release_agent
 
 It can also be changed via remount.
 
-If you want to create a new cgroup under /dev/cgroup:
+If you want to create a new cgroup under /sys/fs/cgroup/rg1:
-# cd /dev/cgroup
+# cd /sys/fs/cgroup/rg1
 # mkdir my_cgroup
 
 Now you want to do something with this cgroup.

Documentation/cgroups/cpuacct.txt

@@ -10,26 +10,25 @@ directly present in its group.
 
 Accounting groups can be created by first mounting the cgroup filesystem.
 
-# mkdir /cgroups
+# mount -t cgroup -ocpuacct none /sys/fs/cgroup
-# mount -t cgroup -ocpuacct none /cgroups
 
-With the above step, the initial or the parent accounting group
+With the above step, the initial or the parent accounting group becomes
-becomes visible at /cgroups. At bootup, this group includes all the
+visible at /sys/fs/cgroup. At bootup, this group includes all the tasks in
-tasks in the system. /cgroups/tasks lists the tasks in this cgroup.
+the system. /sys/fs/cgroup/tasks lists the tasks in this cgroup.
-/cgroups/cpuacct.usage gives the CPU time (in nanoseconds) obtained by
+/sys/fs/cgroup/cpuacct.usage gives the CPU time (in nanoseconds) obtained
-this group which is essentially the CPU time obtained by all the tasks
+by this group which is essentially the CPU time obtained by all the tasks
 in the system.
 
-New accounting groups can be created under the parent group /cgroups.
+New accounting groups can be created under the parent group /sys/fs/cgroup.
 
-# cd /cgroups
+# cd /sys/fs/cgroup
 # mkdir g1
 # echo $$ > g1
 
 The above steps create a new group g1 and move the current shell
 process (bash) into it. CPU time consumed by this bash and its children
 can be obtained from g1/cpuacct.usage and the same is accumulated in
-/cgroups/cpuacct.usage also.
+/sys/fs/cgroup/cpuacct.usage also.
 
 cpuacct.stat file lists a few statistics which further divide the
 CPU time obtained by the cgroup into user and system times. Currently

Documentation/cgroups/cpusets.txt

@@ -661,21 +661,21 @@ than stress the kernel.
 
 To start a new job that is to be contained within a cpuset, the steps are:
 
- 1) mkdir /dev/cpuset
+ 1) mkdir /sys/fs/cgroup/cpuset
- 2) mount -t cgroup -ocpuset cpuset /dev/cpuset
+ 2) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
  3) Create the new cpuset by doing mkdir's and write's (or echo's) in
-    the /dev/cpuset virtual file system.
+    the /sys/fs/cgroup/cpuset virtual file system.
  4) Start a task that will be the "founding father" of the new job.
  5) Attach that task to the new cpuset by writing its pid to the
-    /dev/cpuset tasks file for that cpuset.
+    /sys/fs/cgroup/cpuset tasks file for that cpuset.
  6) fork, exec or clone the job tasks from this founding father task.
 
 For example, the following sequence of commands will setup a cpuset
 named "Charlie", containing just CPUs 2 and 3, and Memory Node 1,
 and then start a subshell 'sh' in that cpuset:
 
-  mount -t cgroup -ocpuset cpuset /dev/cpuset
+  mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset
-  cd /dev/cpuset
+  cd /sys/fs/cgroup/cpuset
   mkdir Charlie
   cd Charlie
   /bin/echo 2-3 > cpuset.cpus
@@ -710,14 +710,14 @@ Creating, modifying, using the cpusets can be done through the cpuset
 virtual filesystem.
 
 To mount it, type:
-# mount -t cgroup -o cpuset cpuset /dev/cpuset
+# mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset
 
-Then under /dev/cpuset you can find a tree that corresponds to the
+Then under /sys/fs/cgroup/cpuset you can find a tree that corresponds to the
-tree of the cpusets in the system. For instance, /dev/cpuset
+tree of the cpusets in the system. For instance, /sys/fs/cgroup/cpuset
 is the cpuset that holds the whole system.
 
-If you want to create a new cpuset under /dev/cpuset:
+If you want to create a new cpuset under /sys/fs/cgroup/cpuset:
-# cd /dev/cpuset
+# cd /sys/fs/cgroup/cpuset
 # mkdir my_cpuset
 
 Now you want to do something with this cpuset.
@@ -765,12 +765,12 @@ wrapper around the cgroup filesystem.
 
 The command
 
-mount -t cpuset X /dev/cpuset
+mount -t cpuset X /sys/fs/cgroup/cpuset
 
 is equivalent to
 
-mount -t cgroup -ocpuset,noprefix X /dev/cpuset
+mount -t cgroup -ocpuset,noprefix X /sys/fs/cgroup/cpuset
-echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
+echo "/sbin/cpuset_release_agent" > /sys/fs/cgroup/cpuset/release_agent
 
 2.2 Adding/removing cpus
 ------------------------

Documentation/cgroups/devices.txt

@@ -22,16 +22,16 @@ removed from the child(ren).
 An entry is added using devices.allow, and removed using
 devices.deny.  For instance
 
-	echo 'c 1:3 mr' > /cgroups/1/devices.allow
+	echo 'c 1:3 mr' > /sys/fs/cgroup/1/devices.allow
 
 allows cgroup 1 to read and mknod the device usually known as
 /dev/null.  Doing
 
-	echo a > /cgroups/1/devices.deny
+	echo a > /sys/fs/cgroup/1/devices.deny
 
 will remove the default 'a *:* rwm' entry. Doing
 
-	echo a > /cgroups/1/devices.allow
+	echo a > /sys/fs/cgroup/1/devices.allow
 
 will add the 'a *:* rwm' entry to the whitelist.
 

Documentation/cgroups/freezer-subsystem.txt

@@ -59,28 +59,28 @@ is non-freezable.
 
 * Examples of usage :
 
-   # mkdir /containers
+   # mkdir /sys/fs/cgroup/freezer
-   # mount -t cgroup -ofreezer freezer  /containers
+   # mount -t cgroup -ofreezer freezer /sys/fs/cgroup/freezer
-   # mkdir /containers/0
+   # mkdir /sys/fs/cgroup/freezer/0
-   # echo $some_pid > /containers/0/tasks
+   # echo $some_pid > /sys/fs/cgroup/freezer/0/tasks
 
 to get status of the freezer subsystem :
 
-   # cat /containers/0/freezer.state
+   # cat /sys/fs/cgroup/freezer/0/freezer.state
    THAWED
 
 to freeze all tasks in the container :
 
-   # echo FROZEN > /containers/0/freezer.state
+   # echo FROZEN > /sys/fs/cgroup/freezer/0/freezer.state
-   # cat /containers/0/freezer.state
+   # cat /sys/fs/cgroup/freezer/0/freezer.state
    FREEZING
-   # cat /containers/0/freezer.state
+   # cat /sys/fs/cgroup/freezer/0/freezer.state
    FROZEN
 
 to unfreeze all tasks in the container :
 
-   # echo THAWED > /containers/0/freezer.state
+   # echo THAWED > /sys/fs/cgroup/freezer/0/freezer.state
-   # cat /containers/0/freezer.state
+   # cat /sys/fs/cgroup/freezer/0/freezer.state
    THAWED
 
 This is the basic mechanism which should do the right thing for user space task

Documentation/cgroups/memory.txt

@@ -1,8 +1,8 @@
 Memory Resource Controller
 
-NOTE: The Memory Resource Controller has been generically been referred
+NOTE: The Memory Resource Controller has generically been referred to as the
-      to as the memory controller in this document. Do not confuse memory
+      memory controller in this document. Do not confuse memory controller
-      controller used here with the memory controller that is used in hardware.
+      used here with the memory controller that is used in hardware.
 
 (For editors)
 In this document:
@@ -70,6 +70,7 @@ Brief summary of control files.
 				 (See sysctl's vm.swappiness)
  memory.move_charge_at_immigrate # set/show controls of moving charges
  memory.oom_control		 # set/show oom controls.
+ memory.numa_stat		 # show the number of memory usage per numa node
 
 1. History
 
@@ -181,7 +182,7 @@ behind this approach is that a cgroup that aggressively uses a shared
 page will eventually get charged for it (once it is uncharged from
 the cgroup that brought it in -- this will happen on memory pressure).
 
-Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used..
+Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used.
 When you do swapoff and make swapped-out pages of shmem(tmpfs) to
 be backed into memory in force, charges for pages are accounted against the
 caller of swapoff rather than the users of shmem.
@@ -213,7 +214,7 @@ affecting global LRU, memory+swap limit is better than just limiting swap from
 OS point of view.
 
 * What happens when a cgroup hits memory.memsw.limit_in_bytes
-When a cgroup his memory.memsw.limit_in_bytes, it's useless to do swap-out
+When a cgroup hits memory.memsw.limit_in_bytes, it's useless to do swap-out
 in this cgroup. Then, swap-out will not be done by cgroup routine and file
 caches are dropped. But as mentioned above, global LRU can do swapout memory
 from it for sanity of the system's memory management state. You can't forbid
@@ -263,16 +264,17 @@ b. Enable CONFIG_RESOURCE_COUNTERS
 c. Enable CONFIG_CGROUP_MEM_RES_CTLR
 d. Enable CONFIG_CGROUP_MEM_RES_CTLR_SWAP (to use swap extension)
 
-1. Prepare the cgroups
+1. Prepare the cgroups (see cgroups.txt, Why are cgroups needed?)
-# mkdir -p /cgroups
+# mount -t tmpfs none /sys/fs/cgroup
-# mount -t cgroup none /cgroups -o memory
+# mkdir /sys/fs/cgroup/memory
+# mount -t cgroup none /sys/fs/cgroup/memory -o memory
 
 2. Make the new group and move bash into it
-# mkdir /cgroups/0
+# mkdir /sys/fs/cgroup/memory/0
-# echo $$ > /cgroups/0/tasks
+# echo $$ > /sys/fs/cgroup/memory/0/tasks
 
 Since now we're in the 0 cgroup, we can alter the memory limit:
-# echo 4M > /cgroups/0/memory.limit_in_bytes
+# echo 4M > /sys/fs/cgroup/memory/0/memory.limit_in_bytes
 
 NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
 mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, Gibibytes.)
@@ -280,11 +282,11 @@ mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, Gibibytes.)
 NOTE: We can write "-1" to reset the *.limit_in_bytes(unlimited).
 NOTE: We cannot set limits on the root cgroup any more.
 
-# cat /cgroups/0/memory.limit_in_bytes
+# cat /sys/fs/cgroup/memory/0/memory.limit_in_bytes
 4194304
 
 We can check the usage:
-# cat /cgroups/0/memory.usage_in_bytes
+# cat /sys/fs/cgroup/memory/0/memory.usage_in_bytes
 1216512
 
 A successful write to this file does not guarantee a successful set of
@@ -464,6 +466,24 @@ value for efficient access. (Of course, when necessary, it's synchronized.)
 If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP)
 value in memory.stat(see 5.2).
 
+5.6 numa_stat
+
+This is similar to numa_maps but operates on a per-memcg basis.  This is
+useful for providing visibility into the numa locality information within
+an memcg since the pages are allowed to be allocated from any physical
+node.  One of the usecases is evaluating application performance by
+combining this information with the application's cpu allocation.
+
+We export "total", "file", "anon" and "unevictable" pages per-node for
+each memcg.  The ouput format of memory.numa_stat is:
+
+total=<total pages> N0=<node 0 pages> N1=<node 1 pages> ...
+file=<total file pages> N0=<node 0 pages> N1=<node 1 pages> ...
+anon=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
+unevictable=<total anon pages> N0=<node 0 pages> N1=<node 1 pages> ...
+
+And we have total = file + anon + unevictable.
+
 6. Hierarchy support
 
 The memory controller supports a deep hierarchy and hierarchical accounting.
@@ -471,13 +491,13 @@ The hierarchy is created by creating the appropriate cgroups in the
 cgroup filesystem. Consider for example, the following cgroup filesystem
 hierarchy
 
-		root
+	       root
 	     /  |   \
-           /	|    \
+            /	|    \
-	  a	b	c
+	   a	b     c
-			| \
+		      | \
-			|  \
+		      |  \
-			d   e
+		      d   e
 
 In the diagram above, with hierarchical accounting enabled, all memory
 usage of e, is accounted to its ancestors up until the root (i.e, c and root),

Documentation/feature-removal-schedule.txt

@@ -481,23 +481,6 @@ Who:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
 
 ----------------------------
 
-What:   namespace cgroup (ns_cgroup)
-When:   2.6.38
-Why:    The ns_cgroup leads to some problems:
-	* cgroup creation is out-of-control
-	* cgroup name can conflict when pids are looping
-	* it is not possible to have a single process handling
-	a lot of namespaces without falling in a exponential creation time
-	* we may want to create a namespace without creating a cgroup
-
-	The ns_cgroup is replaced by a compatibility flag 'clone_children',
-	where a newly created cgroup will copy the parent cgroup values.
-	The userspace has to manually create a cgroup and add a task to
-	the 'tasks' file.
-Who:    Daniel Lezcano <daniel.lezcano@free.fr>
-
-----------------------------
-
 What:	iwlwifi disable_hw_scan module parameters
 When:	3.0
 Why:	Hareware scan is the prefer method for iwlwifi devices for

Documentation/filesystems/caching/netfs-api.txt

@@ -673,6 +673,22 @@ storage request to complete, or it may attempt to cancel the storage request -
 in which case the page will not be stored in the cache this time.
 
 
+BULK INODE PAGE UNCACHE
+-----------------------
+
+A convenience routine is provided to perform an uncache on all the pages
+attached to an inode.  This assumes that the pages on the inode correspond on a
+1:1 basis with the pages in the cache.
+
+	void fscache_uncache_all_inode_pages(struct fscache_cookie *cookie,
+					     struct inode *inode);
+
+This takes the netfs cookie that the pages were cached with and the inode that
+the pages are attached to.  This function will wait for pages to finish being
+written to the cache and for the cache to finish with the page generally.  No
+error is returned.
+
+
 ==========================
 INDEX AND DATA FILE UPDATE
 ==========================

Documentation/filesystems/proc.txt

@@ -843,6 +843,7 @@ Provides counts of softirq handlers serviced since boot time, for each cpu.
  TASKLET:          0          0          0        290
    SCHED:      27035      26983      26971      26746
  HRTIMER:          0          0          0          0
+     RCU:       1678       1769       2178       2250
 
 
 1.3 IDE devices in /proc/ide

Documentation/hwmon/f71882fg

@@ -22,6 +22,10 @@ Supported chips:
     Prefix: 'f71869'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
+  * Fintek F71869A
+    Prefix: 'f71869a'
+    Addresses scanned: none, address read from Super I/O config space
+    Datasheet: Not public
   * Fintek F71882FG and F71883FG
     Prefix: 'f71882fg'
     Addresses scanned: none, address read from Super I/O config space

Documentation/hwmon/k10temp

@@ -9,8 +9,8 @@ Supported chips:
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
-* AMD Family 12h processors: "Llano"
+* AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
-* AMD Family 14h processors: "Brazos" (C/E/G-Series)
+* AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
 * AMD Family 15h processors: "Bulldozer"
 
   Prefix: 'k10temp'
@@ -20,12 +20,16 @@ Supported chips:
     http://support.amd.com/us/Processor_TechDocs/31116.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41256.pdf
+  BIOS and Kernel Developer's Guide (BKDG) for AMD Family 12h Processors:
+    http://support.amd.com/us/Processor_TechDocs/41131.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
     http://support.amd.com/us/Processor_TechDocs/43170.pdf
   Revision Guide for AMD Family 10h Processors:
     http://support.amd.com/us/Processor_TechDocs/41322.pdf
   Revision Guide for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41788.pdf
+  Revision Guide for AMD Family 12h Processors:
+    http://support.amd.com/us/Processor_TechDocs/44739.pdf
   Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
     http://support.amd.com/us/Processor_TechDocs/47534.pdf
   AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:

Documentation/kernel-parameters.txt

@@ -2015,6 +2015,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				the default.
 				off: Turn ECRC off
 				on: Turn ECRC on.
+		realloc		reallocate PCI resources if allocations done by BIOS
+				are erroneous.
 
 	pcie_aspm=	[PCIE] Forcibly enable or disable PCIe Active State Power
 			Management.

Documentation/kmemleak.txt

@@ -11,7 +11,9 @@ with the difference that the orphan objects are not freed but only
 reported via /sys/kernel/debug/kmemleak. A similar method is used by the
 Valgrind tool (memcheck --leak-check) to detect the memory leaks in
 user-space applications.
-Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze and tile.
+
+Please check DEBUG_KMEMLEAK dependencies in lib/Kconfig.debug for supported
+architectures.
 
 Usage
 -----

Documentation/md.txt

@@ -555,7 +555,7 @@ also have
    sync_min
    sync_max
      The two values, given as numbers of sectors, indicate a range
-     withing the array where 'check'/'repair' will operate. Must be
+     within the array where 'check'/'repair' will operate. Must be
      a multiple of chunk_size. When it reaches "sync_max" it will
      pause, rather than complete.
      You can use 'select' or 'poll' on "sync_completed" to wait for

Documentation/power/devices.txt

@@ -520,59 +520,20 @@ Support for power domains is provided through the pwr_domain field of struct
 device.  This field is a pointer to an object of type struct dev_power_domain,
 defined in include/linux/pm.h, providing a set of power management callbacks
 analogous to the subsystem-level and device driver callbacks that are executed
-for the given device during all power transitions, in addition to the respective
+for the given device during all power transitions, instead of the respective
-subsystem-level callbacks.  Specifically, the power domain "suspend" callbacks
+subsystem-level callbacks.  Specifically, if a device's pm_domain pointer is
-(i.e. ->runtime_suspend(), ->suspend(), ->freeze(), ->poweroff(), etc.) are
+not NULL, the ->suspend() callback from the object pointed to by it will be
-executed after the analogous subsystem-level callbacks, while the power domain
+executed instead of its subsystem's (e.g. bus type's) ->suspend() callback and
-"resume" callbacks (i.e. ->runtime_resume(), ->resume(), ->thaw(), ->restore,
+anlogously for all of the remaining callbacks.  In other words, power management
-etc.) are executed before the analogous subsystem-level callbacks.  Error codes
+domain callbacks, if defined for the given device, always take precedence over
-returned by the "suspend" and "resume" power domain callbacks are ignored.
+the callbacks provided by the device's subsystem (e.g. bus type).
 
-Power domain ->runtime_idle() callback is executed before the subsystem-level
+The support for device power management domains is only relevant to platforms
-->runtime_idle() callback and the result returned by it is not ignored.  Namely,
+needing to use the same device driver power management callbacks in many
-if it returns error code, the subsystem-level ->runtime_idle() callback will not
+different power domain configurations and wanting to avoid incorporating the
-be called and the helper function rpm_idle() executing it will return error
+support for power domains into subsystem-level callbacks, for example by
-code.  This mechanism is intended to help platforms where saving device state
+modifying the platform bus type.  Other platforms need not implement it or take
-is a time consuming operation and should only be carried out if all devices
+it into account in any way.
-in the power domain are idle, before turning off the shared power resource(s).
-Namely, the power domain ->runtime_idle() callback may return error code until
-the pm_runtime_idle() helper (or its asychronous version) has been called for
-all devices in the power domain (it is recommended that the returned error code
-be -EBUSY in those cases), preventing the subsystem-level ->runtime_idle()
-callback from being run prematurely.
-
-The support for device power domains is only relevant to platforms needing to
-use the same subsystem-level (e.g. platform bus type) and device driver power
-management callbacks in many different power domain configurations and wanting
-to avoid incorporating the support for power domains into the subsystem-level
-callbacks.  The other platforms need not implement it or take it into account
-in any way.
-
-
-System Devices
---------------
-System devices (sysdevs) follow a slightly different API, which can be found in
-
-	include/linux/sysdev.h
-	drivers/base/sys.c
-
-System devices will be suspended with interrupts disabled, and after all other
-devices have been suspended.  On resume, they will be resumed before any other
-devices, and also with interrupts disabled.  These things occur in special
-"sysdev_driver" phases, which affect only system devices.
-
-Thus, after the suspend_noirq (or freeze_noirq or poweroff_noirq) phase, when
-the non-boot CPUs are all offline and IRQs are disabled on the remaining online
-CPU, then a sysdev_driver.suspend phase is carried out, and the system enters a
-sleep state (or a system image is created).  During resume (or after the image
-has been created or loaded) a sysdev_driver.resume phase is carried out, IRQs
-are enabled on the only online CPU, the non-boot CPUs are enabled, and the
-resume_noirq (or thaw_noirq or restore_noirq) phase begins.
-
-Code to actually enter and exit the system-wide low power state sometimes
-involves hardware details that are only known to the boot firmware, and
-may leave a CPU running software (from SRAM or flash memory) that monitors
-the system and manages its wakeup sequence.
 
 
 Device Low Power (suspend) States

Documentation/power/runtime_pm.txt

@@ -501,13 +501,29 @@ helper functions described in Section 4.  In that case, pm_runtime_resume()
 should be used.  Of course, for this purpose the device's run-time PM has to be
 enabled earlier by calling pm_runtime_enable().
 
-If the device bus type's or driver's ->probe() or ->remove() callback runs
+If the device bus type's or driver's ->probe() callback runs
 pm_runtime_suspend() or pm_runtime_idle() or their asynchronous counterparts,
 they will fail returning -EAGAIN, because the device's usage counter is
-incremented by the core before executing ->probe() and ->remove().  Still, it
+incremented by the driver core before executing ->probe().  Still, it may be
-may be desirable to suspend the device as soon as ->probe() or ->remove() has
+desirable to suspend the device as soon as ->probe() has finished, so the driver
-finished, so the PM core uses pm_runtime_idle_sync() to invoke the
+core uses pm_runtime_put_sync() to invoke the subsystem-level idle callback for
-subsystem-level idle callback for the device at that time.
+the device at that time.
+
+Moreover, the driver core prevents runtime PM callbacks from racing with the bus
+notifier callback in __device_release_driver(), which is necessary, because the
+notifier is used by some subsystems to carry out operations affecting the
+runtime PM functionality.  It does so by calling pm_runtime_get_sync() before
+driver_sysfs_remove() and the BUS_NOTIFY_UNBIND_DRIVER notifications.  This
+resumes the device if it's in the suspended state and prevents it from
+being suspended again while those routines are being executed.
+
+To allow bus types and drivers to put devices into the suspended state by
+calling pm_runtime_suspend() from their ->remove() routines, the driver core
+executes pm_runtime_put_sync() after running the BUS_NOTIFY_UNBIND_DRIVER
+notifications in __device_release_driver().  This requires bus types and
+drivers to make their ->remove() callbacks avoid races with runtime PM directly,
+but also it allows of more flexibility in the handling of devices during the
+removal of their drivers.
 
 The user space can effectively disallow the driver of the device to power manage
 it at run time by changing the value of its /sys/devices/.../power/control
@@ -566,11 +582,6 @@ to do this is:
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
 
-The PM core always increments the run-time usage counter before calling the
-->prepare() callback and decrements it after calling the ->complete() callback.
-Hence disabling run-time PM temporarily like this will not cause any run-time
-suspend callbacks to be lost.
-
 7. Generic subsystem callbacks
 
 Subsystems may wish to conserve code space by using the set of generic power

Documentation/printk-formats.txt

@@ -9,7 +9,121 @@ If variable is of Type,		use printk format specifier:
 		size_t			%zu or %zx
 		ssize_t			%zd or %zx
 
-Raw pointer value SHOULD be printed with %p.
+Raw pointer value SHOULD be printed with %p. The kernel supports
+the following extended format specifiers for pointer types:
+
+Symbols/Function Pointers:
+
+	%pF	versatile_init+0x0/0x110
+	%pf	versatile_init
+	%pS	versatile_init+0x0/0x110
+	%ps	versatile_init
+	%pB	prev_fn_of_versatile_init+0x88/0x88
+
+	For printing symbols and function pointers. The 'S' and 's' specifiers
+	result in the symbol name with ('S') or without ('s') offsets. Where
+	this is used on a kernel without KALLSYMS - the symbol address is
+	printed instead.
+
+	The 'B' specifier results in the symbol name with offsets and should be
+	used when printing stack backtraces. The specifier takes into
+	consideration the effect of compiler optimisations which may occur
+	when tail-call's are used and marked with the noreturn GCC attribute.
+
+	On ia64, ppc64 and parisc64 architectures function pointers are
+	actually function descriptors which must first be resolved. The 'F' and
+	'f' specifiers perform this resolution and then provide the same
+	functionality as the 'S' and 's' specifiers.
+
+Kernel Pointers:
+
+	%pK	0x01234567 or 0x0123456789abcdef
+
+	For printing kernel pointers which should be hidden from unprivileged
+	users. The behaviour of %pK depends on the kptr_restrict sysctl - see
+	Documentation/sysctl/kernel.txt for more details.
+
+Struct Resources:
+
+	%pr	[mem 0x60000000-0x6fffffff flags 0x2200] or
+		[mem 0x0000000060000000-0x000000006fffffff flags 0x2200]
+	%pR	[mem 0x60000000-0x6fffffff pref] or
+		[mem 0x0000000060000000-0x000000006fffffff pref]
+
+	For printing struct resources. The 'R' and 'r' specifiers result in a
+	printed resource with ('R') or without ('r') a decoded flags member.
+
+MAC/FDDI addresses:
+
+	%pM	00:01:02:03:04:05
+	%pMF	00-01-02-03-04-05
+	%pm	000102030405
+
+	For printing 6-byte MAC/FDDI addresses in hex notation. The 'M' and 'm'
+	specifiers result in a printed address with ('M') or without ('m') byte
+	separators. The default byte separator is the colon (':').
+
+	Where FDDI addresses are concerned the 'F' specifier can be used after
+	the 'M' specifier to use dash ('-') separators instead of the default
+	separator.
+
+IPv4 addresses:
+
+	%pI4	1.2.3.4
+	%pi4	001.002.003.004
+	%p[Ii][hnbl]
+
+	For printing IPv4 dot-separated decimal addresses. The 'I4' and 'i4'
+	specifiers result in a printed address with ('i4') or without ('I4')
+	leading zeros.
+
+	The additional 'h', 'n', 'b', and 'l' specifiers are used to specify
+	host, network, big or little endian order addresses respectively. Where
+	no specifier is provided the default network/big endian order is used.
+
+IPv6 addresses:
+
+	%pI6	0001:0002:0003:0004:0005:0006:0007:0008
+	%pi6	00010002000300040005000600070008
+	%pI6c	1:2:3:4:5:6:7:8
+
+	For printing IPv6 network-order 16-bit hex addresses. The 'I6' and 'i6'
+	specifiers result in a printed address with ('I6') or without ('i6')
+	colon-separators. Leading zeros are always used.
+
+	The additional 'c' specifier can be used with the 'I' specifier to
+	print a compressed IPv6 address as described by
+	http://tools.ietf.org/html/rfc5952
+
+UUID/GUID addresses:
+
+	%pUb	00010203-0405-0607-0809-0a0b0c0d0e0f
+	%pUB	00010203-0405-0607-0809-0A0B0C0D0E0F
+	%pUl	03020100-0504-0706-0809-0a0b0c0e0e0f
+	%pUL	03020100-0504-0706-0809-0A0B0C0E0E0F
+
+	For printing 16-byte UUID/GUIDs addresses. The additional 'l', 'L',
+	'b' and 'B' specifiers are used to specify a little endian order in
+	lower ('l') or upper case ('L') hex characters - and big endian order
+	in lower ('b') or upper case ('B') hex characters.
+
+	Where no additional specifiers are used the default little endian
+	order with lower case hex characters will be printed.
+
+struct va_format:
+
+	%pV
+
+	For printing struct va_format structures. These contain a format string
+	and va_list as follows:
+
+	struct va_format {
+		const char *fmt;
+		va_list *va;
+	};
+
+	Do not use this feature without some mechanism to verify the
+	correctness of the format string and va_list arguments.
 
 u64 SHOULD be printed with %llu/%llx, (unsigned long long):
 
@@ -32,4 +146,5 @@ Reminder: sizeof() result is of type size_t.
 Thank you for your cooperation and attention.
 
 
-By Randy Dunlap <rdunlap@xenotime.net>
+By Randy Dunlap <rdunlap@xenotime.net> and
+Andrew Murray <amurray@mpc-data.co.uk>

Documentation/scheduler/sched-design-CFS.txt

@@ -223,9 +223,10 @@ When CONFIG_FAIR_GROUP_SCHED is defined, a "cpu.shares" file is created for each
 group created using the pseudo filesystem.  See example steps below to create
 task groups and modify their CPU share using the "cgroups" pseudo filesystem.
 
-	# mkdir /dev/cpuctl
+	# mount -t tmpfs cgroup_root /sys/fs/cgroup
-	# mount -t cgroup -ocpu none /dev/cpuctl
+	# mkdir /sys/fs/cgroup/cpu
-	# cd /dev/cpuctl
+	# mount -t cgroup -ocpu none /sys/fs/cgroup/cpu
+	# cd /sys/fs/cgroup/cpu
 
 	# mkdir multimedia	# create "multimedia" group of tasks
 	# mkdir browser		# create "browser" group of tasks

Documentation/scheduler/sched-rt-group.txt

@@ -129,9 +129,8 @@ priority!
 Enabling CONFIG_RT_GROUP_SCHED lets you explicitly allocate real
 CPU bandwidth to task groups.
 
-This uses the /cgroup virtual file system and
+This uses the cgroup virtual file system and "<cgroup>/cpu.rt_runtime_us"
-"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
+to control the CPU time reserved for each control group.
-control group.
 
 For more information on working with control groups, you should read
 Documentation/cgroups/cgroups.txt as well.
@@ -150,7 +149,7 @@ For now, this can be simplified to just the following (but see Future plans):
 ===============
 
 There is work in progress to make the scheduling period for each group
-("/cgroup/<cgroup>/cpu.rt_period_us") configurable as well.
+("<cgroup>/cpu.rt_period_us") configurable as well.
 
 The constraint on the period is that a subgroup must have a smaller or
 equal period to its parent. But realistically its not very useful _yet_

Documentation/usb/error-codes.txt

@@ -76,6 +76,13 @@ A transfer's actual_length may be positive even when an error has been
 reported.  That's because transfers often involve several packets, so that
 one or more packets could finish before an error stops further endpoint I/O.
 
+For isochronous URBs, the urb status value is non-zero only if the URB is
+unlinked, the device is removed, the host controller is disabled, or the total
+transferred length is less than the requested length and the URB_SHORT_NOT_OK
+flag is set.  Completion handlers for isochronous URBs should only see
+urb->status set to zero, -ENOENT, -ECONNRESET, -ESHUTDOWN, or -EREMOTEIO.
+Individual frame descriptor status fields may report more status codes.
+
 
 0			Transfer completed successfully
 
@@ -132,7 +139,7 @@ one or more packets could finish before an error stops further endpoint I/O.
 			device removal events immediately.
 
 -EXDEV			ISO transfer only partially completed
-			look at individual frame status for details
+			(only set in iso_frame_desc[n].status, not urb->status)
 
 -EINVAL			ISO madness, if this happens: Log off and go home
 

Documentation/vm/hwpoison.txt

@@ -129,12 +129,12 @@ Limit injection to pages owned by memgroup. Specified by inode number
 of the memcg.
 
 Example:
-        mkdir /cgroup/hwpoison
+        mkdir /sys/fs/cgroup/mem/hwpoison
 
         usemem -m 100 -s 1000 &
-        echo `jobs -p` > /cgroup/hwpoison/tasks
+        echo `jobs -p` > /sys/fs/cgroup/mem/hwpoison/tasks
 
-        memcg_ino=$(ls -id /cgroup/hwpoison | cut -f1 -d' ')
+        memcg_ino=$(ls -id /sys/fs/cgroup/mem/hwpoison | cut -f1 -d' ')
         echo $memcg_ino > /debug/hwpoison/corrupt-filter-memcg
 
         page-types -p `pidof init`   --hwpoison  # shall do nothing

MAINTAINERS

@@ -594,6 +594,16 @@ S:	Maintained
 F:	arch/arm/lib/floppydma.S
 F:	arch/arm/include/asm/floppy.h
 
+ARM PMU PROFILING AND DEBUGGING
+M:	Will Deacon <will.deacon@arm.com>
+S:	Maintained
+F:	arch/arm/kernel/perf_event*
+F:	arch/arm/oprofile/common.c
+F:	arch/arm/kernel/pmu.c
+F:	arch/arm/include/asm/pmu.h
+F:	arch/arm/kernel/hw_breakpoint.c
+F:	arch/arm/include/asm/hw_breakpoint.h
+
 ARM PORT
 M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1345,16 +1355,18 @@ F:	drivers/auxdisplay/
 F:	include/linux/cfag12864b.h
 
 AVR32 ARCHITECTURE
-M:	Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+M:	Haavard Skinnemoen <hskinnemoen@gmail.com>
+M:	Hans-Christian Egtvedt <egtvedt@samfundet.no>
 W:	http://www.atmel.com/products/AVR32/
 W:	http://avr32linux.org/
 W:	http://avrfreaks.net/
-S:	Supported
+S:	Maintained
 F:	arch/avr32/
 
 AVR32/AT32AP MACHINE SUPPORT
-M:	Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+M:	Haavard Skinnemoen <hskinnemoen@gmail.com>
-S:	Supported
+M:	Hans-Christian Egtvedt <egtvedt@samfundet.no>
+S:	Maintained
 F:	arch/avr32/mach-at32ap/
 
 AX.25 NETWORK LAYER
@@ -1390,7 +1402,6 @@ F:	include/linux/backlight.h
 BATMAN ADVANCED
 M:	Marek Lindner <lindner_marek@yahoo.de>
 M:	Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
-M:	Sven Eckelmann <sven@narfation.org>
 L:	b.a.t.m.a.n@lists.open-mesh.org
 W:	http://www.open-mesh.org/
 S:	Maintained
@@ -1423,7 +1434,6 @@ S:	Supported
 F:	arch/blackfin/
 
 BLACKFIN EMAC DRIVER
-M:	Michael Hennerich <michael.hennerich@analog.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
@@ -1639,7 +1649,7 @@ CAN NETWORK LAYER
 M:	Oliver Hartkopp <socketcan@hartkopp.net>
 M:	Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
 M:	Urs Thuermann <urs.thuermann@volkswagen.de>
-L:	socketcan-core@lists.berlios.de
+L:	socketcan-core@lists.berlios.de (subscribers-only)
 L:	netdev@vger.kernel.org
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
@@ -1651,7 +1661,7 @@ F:	include/linux/can/raw.h
 
 CAN NETWORK DRIVERS
 M:	Wolfgang Grandegger <wg@grandegger.com>
-L:	socketcan-core@lists.berlios.de
+L:	socketcan-core@lists.berlios.de (subscribers-only)
 L:	netdev@vger.kernel.org
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
@@ -1739,7 +1749,7 @@ S:	Supported
 F:	drivers/net/enic/
 
 CIRRUS LOGIC EP93XX ETHERNET DRIVER
-M:	Lennert Buytenhek <kernel@wantstofly.org>
+M:	Hartley Sweeten <hsweeten@visionengravers.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/arm/ep93xx_eth.c
@@ -1889,7 +1899,6 @@ L:	cpufreq@vger.kernel.org
 W:	http://www.codemonkey.org.uk/projects/cpufreq/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
 S:	Maintained
-F:	arch/x86/kernel/cpu/cpufreq/
 F:	drivers/cpufreq/
 F:	include/linux/cpufreq.h
 
@@ -2198,7 +2207,7 @@ F:	drivers/acpi/dock.c
 DOCUMENTATION
 M:	Randy Dunlap <rdunlap@xenotime.net>
 L:	linux-doc@vger.kernel.org
-T:	quilt oss.oracle.com/~rdunlap/kernel-doc-patches/current/
+T:	quilt http://userweb.kernel.org/~rdunlap/kernel-doc-patches/current/
 S:	Maintained
 F:	Documentation/
 
@@ -2292,8 +2301,7 @@ F:	drivers/scsi/eata_pio.*
 
 EBTABLES
 M:	Bart De Schuymer <bart.de.schuymer@pandora.be>
-L:	ebtables-user@lists.sourceforge.net
+L:	netfilter-devel@vger.kernel.org
-L:	ebtables-devel@lists.sourceforge.net
 W:	http://ebtables.sourceforge.net/
 S:	Maintained
 F:	include/linux/netfilter_bridge/ebt_*.h
@@ -3820,6 +3828,12 @@ S:	Maintained
 F:	drivers/leds/
 F:	include/linux/leds.h
 
+LEGACY EEPROM DRIVER
+M:	Jean Delvare <khali@linux-fr.org>
+S:	Maintained
+F:	Documentation/misc-devices/eeprom
+F:	drivers/misc/eeprom/eeprom.c
+
 LEGO USB Tower driver
 M:	Juergen Stuber <starblue@users.sourceforge.net>
 L:	legousb-devel@lists.sourceforge.net
@@ -4145,7 +4159,7 @@ F:	include/linux/mm.h
 F:	mm/
 
 MEMORY RESOURCE CONTROLLER
-M:	Balbir Singh <balbir@linux.vnet.ibm.com>
+M:	Balbir Singh <bsingharora@gmail.com>
 M:	Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
 M:	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
 L:	linux-mm@kvack.org
@@ -4890,7 +4904,7 @@ F:	mm/percpu*.c
 F:	arch/*/include/asm/percpu.h
 
 PER-TASK DELAY ACCOUNTING
-M:	Balbir Singh <balbir@linux.vnet.ibm.com>
+M:	Balbir Singh <bsingharora@gmail.com>
 S:	Maintained
 F:	include/linux/delayacct.h
 F:	kernel/delayacct.c
@@ -4978,7 +4992,7 @@ F:	drivers/power/power_supply*
 
 PNP SUPPORT
 M:	Adam Belay <abelay@mit.edu>
-M:	Bjorn Helgaas <bjorn.helgaas@hp.com>
+M:	Bjorn Helgaas <bhelgaas@google.com>
 S:	Maintained
 F:	drivers/pnp/
 
@@ -5177,6 +5191,7 @@ S:	Supported
 F:	drivers/net/qlcnic/
 
 QLOGIC QLGE 10Gb ETHERNET DRIVER
+M:	Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
 M:	Ron Mercer <ron.mercer@qlogic.com>
 M:	linux-driver@qlogic.com
 L:	netdev@vger.kernel.org
@@ -6098,7 +6113,7 @@ F:	include/target/
 F:	Documentation/target/
 
 TASKSTATS STATISTICS INTERFACE
-M:	Balbir Singh <balbir@linux.vnet.ibm.com>
+M:	Balbir Singh <bsingharora@gmail.com>
 S:	Maintained
 F:	Documentation/accounting/taskstats*
 F:	include/linux/taskstats*
@@ -6430,8 +6445,9 @@ S:	Maintained
 F:	drivers/usb/misc/rio500*
 
 USB EHCI DRIVER
+M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
-S:	Orphan
+S:	Maintained
 F:	Documentation/usb/ehci.txt
 F:	drivers/usb/host/ehci*
 
@@ -6458,9 +6474,15 @@ M:	Jiri Kosina <jkosina@suse.cz>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
-F:	Documentation/usb/hiddev.txt
+F:	Documentation/hid/hiddev.txt
 F:	drivers/hid/usbhid/
 
+USB/IP DRIVERS
+M:	Matt Mooney <mfm@muteddisk.com>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	drivers/staging/usbip/
+
 USB ISP116X DRIVER
 M:	Olav Kongas <ok@artecdesign.ee>
 L:	linux-usb@vger.kernel.org
@@ -6490,8 +6512,9 @@ S:	Maintained
 F:	sound/usb/midi.*
 
 USB OHCI DRIVER
+M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
-S:	Orphan
+S:	Maintained
 F:	Documentation/usb/ohci.txt
 F:	drivers/usb/host/ohci*
 
@@ -6717,6 +6740,15 @@ S:	Maintained
 F:	Documentation/filesystems/vfat.txt
 F:	fs/fat/
 
+VIDEOBUF2 FRAMEWORK
+M:	Pawel Osciak <pawel@osciak.com>
+M:	Marek Szyprowski <m.szyprowski@samsung.com>
+M:	Kyungmin Park <kyungmin.park@samsung.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	drivers/media/video/videobuf2-*
+F:	include/media/videobuf2-*
+
 VIRTIO CONSOLE DRIVER
 M:	Amit Shah <amit.shah@redhat.com>
 L:	virtualization@lists.linux-foundation.org
@@ -6994,6 +7026,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.
 S:	Maintained
 F:	drivers/platform/x86
 
+X86 MCE INFRASTRUCTURE
+M:	Tony Luck <tony.luck@intel.com>
+M:	Borislav Petkov <bp@amd64.org>
+L:	linux-edac@vger.kernel.org
+S:	Maintained
+F:	arch/x86/kernel/cpu/mcheck/*
+
 XEN HYPERVISOR INTERFACE
 M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc6
 NAME = Sneaky Weasel
 
 # *DOCUMENTATION*
@@ -1526,7 +1526,8 @@ quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files))
 
 # Run depmod only if we have System.map and depmod is executable
 quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
-      cmd_depmod = $(srctree)/scripts/depmod.sh $(DEPMOD) $(KERNELRELEASE)
+      cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
+                   $(KERNELRELEASE)
 
 # Create temporary dir for module support files
 # clean it up only when building all modules

README

@@ -1,6 +1,6 @@
-	Linux kernel release 2.6.xx <http://kernel.org/>
+	Linux kernel release 3.x <http://kernel.org/>
 
-These are the release notes for Linux version 2.6.  Read them carefully,
+These are the release notes for Linux version 3.  Read them carefully,
 as they tell you what this is all about, explain how to install the
 kernel, and what to do if something goes wrong. 
 
@@ -62,10 +62,10 @@ INSTALLING the kernel source:
    directory where you have permissions (eg. your home directory) and
    unpack it:
 
-		gzip -cd linux-2.6.XX.tar.gz | tar xvf -
+		gzip -cd linux-3.X.tar.gz | tar xvf -
 
    or
-		bzip2 -dc linux-2.6.XX.tar.bz2 | tar xvf -
+		bzip2 -dc linux-3.X.tar.bz2 | tar xvf -
 
 
    Replace "XX" with the version number of the latest kernel.
@@ -75,15 +75,15 @@ INSTALLING the kernel source:
    files.  They should match the library, and not get messed up by
    whatever the kernel-du-jour happens to be.
 
- - You can also upgrade between 2.6.xx releases by patching.  Patches are
+ - You can also upgrade between 3.x releases by patching.  Patches are
    distributed in the traditional gzip and the newer bzip2 format.  To
    install by patching, get all the newer patch files, enter the
-   top level directory of the kernel source (linux-2.6.xx) and execute:
+   top level directory of the kernel source (linux-3.x) and execute:
 
-		gzip -cd ../patch-2.6.xx.gz | patch -p1
+		gzip -cd ../patch-3.x.gz | patch -p1
 
    or
-		bzip2 -dc ../patch-2.6.xx.bz2 | patch -p1
+		bzip2 -dc ../patch-3.x.bz2 | patch -p1
 
    (repeat xx for all versions bigger than the version of your current
    source tree, _in_order_) and you should be ok.  You may want to remove
@@ -91,9 +91,9 @@ INSTALLING the kernel source:
    failed patches (xxx# or xxx.rej). If there are, either you or me has
    made a mistake.
 
-   Unlike patches for the 2.6.x kernels, patches for the 2.6.x.y kernels
+   Unlike patches for the 3.x kernels, patches for the 3.x.y kernels
    (also known as the -stable kernels) are not incremental but instead apply
-   directly to the base 2.6.x kernel.  Please read
+   directly to the base 3.x kernel.  Please read
    Documentation/applying-patches.txt for more information.
 
    Alternatively, the script patch-kernel can be used to automate this
@@ -107,14 +107,14 @@ INSTALLING the kernel source:
    an alternative directory can be specified as the second argument.
 
  - If you are upgrading between releases using the stable series patches
-   (for example, patch-2.6.xx.y), note that these "dot-releases" are
+   (for example, patch-3.x.y), note that these "dot-releases" are
-   not incremental and must be applied to the 2.6.xx base tree. For
+   not incremental and must be applied to the 3.x base tree. For
-   example, if your base kernel is 2.6.12 and you want to apply the
+   example, if your base kernel is 3.0 and you want to apply the
-   2.6.12.3 patch, you do not and indeed must not first apply the
+   3.0.3 patch, you do not and indeed must not first apply the
-   2.6.12.1 and 2.6.12.2 patches. Similarly, if you are running kernel
+   3.0.1 and 3.0.2 patches. Similarly, if you are running kernel
-   version 2.6.12.2 and want to jump to 2.6.12.3, you must first
+   version 3.0.2 and want to jump to 3.0.3, you must first
-   reverse the 2.6.12.2 patch (that is, patch -R) _before_ applying
+   reverse the 3.0.2 patch (that is, patch -R) _before_ applying
-   the 2.6.12.3 patch.
+   the 3.0.3 patch.
    You can read more on this in Documentation/applying-patches.txt
 
  - Make sure you have no stale .o files and dependencies lying around:
@@ -126,7 +126,7 @@ INSTALLING the kernel source:
 
 SOFTWARE REQUIREMENTS
 
-   Compiling and running the 2.6.xx kernels requires up-to-date
+   Compiling and running the 3.x kernels requires up-to-date
    versions of various software packages.  Consult
    Documentation/Changes for the minimum version numbers required
    and how to get updates for these packages.  Beware that using
@@ -142,11 +142,11 @@ BUILD directory for the kernel:
    Using the option "make O=output/dir" allow you to specify an alternate
    place for the output files (including .config).
    Example:
-     kernel source code:	/usr/src/linux-2.6.N
+     kernel source code:	/usr/src/linux-3.N
      build directory:		/home/name/build/kernel
 
    To configure and build the kernel use:
-   cd /usr/src/linux-2.6.N
+   cd /usr/src/linux-3.N
    make O=/home/name/build/kernel menuconfig
    make O=/home/name/build/kernel
    sudo make O=/home/name/build/kernel modules_install install

arch/alpha/include/asm/mmzone.h

@@ -56,7 +56,6 @@ PLAT_NODE_DATA_LOCALNR(unsigned long p, int n)
  * Given a kernel address, find the home node of the underlying memory.
  */
 #define kvaddr_to_nid(kaddr)	pa_to_nid(__pa(kaddr))
-#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
 
 /*
  * Given a kaddr, LOCAL_BASE_ADDR finds the owning node of the memory

arch/alpha/kernel/osf_sys.c

@@ -409,7 +409,7 @@ SYSCALL_DEFINE2(osf_getdomainname, char __user *, name, int, namelen)
 		return -EFAULT;
 
 	len = namelen;
-	if (namelen > 32)
+	if (len > 32)
 		len = 32;
 
 	down_read(&uts_sem);
@@ -594,7 +594,7 @@ SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
 	down_read(&uts_sem);
 	res = sysinfo_table[offset];
 	len = strlen(res)+1;
-	if (len > count)
+	if ((unsigned long)len > (unsigned long)count)
 		len = count;
 	if (copy_to_user(buf, res, len))
 		err = -EFAULT;
@@ -649,7 +649,7 @@ SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer,
 		return 1;
 
 	case GSI_GET_HWRPB:
-		if (nbytes < sizeof(*hwrpb))
+		if (nbytes > sizeof(*hwrpb))
 			return -EINVAL;
 		if (copy_to_user(buffer, hwrpb, nbytes) != 0)
 			return -EFAULT;
@@ -1008,6 +1008,7 @@ SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options,
 {
 	struct rusage r;
 	long ret, err;
+	unsigned int status = 0;
 	mm_segment_t old_fs;
 
 	if (!ur)
@@ -1016,13 +1017,15 @@ SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options,
 	old_fs = get_fs();
 		
 	set_fs (KERNEL_DS);
-	ret = sys_wait4(pid, ustatus, options, (struct rusage __user *) &r);
+	ret = sys_wait4(pid, (unsigned int __user *) &status, options,
+			(struct rusage __user *) &r);
 	set_fs (old_fs);
 
 	if (!access_ok(VERIFY_WRITE, ur, sizeof(*ur)))
 		return -EFAULT;
 
 	err = 0;
+	err |= put_user(status, ustatus);
 	err |= __put_user(r.ru_utime.tv_sec, &ur->ru_utime.tv_sec);
 	err |= __put_user(r.ru_utime.tv_usec, &ur->ru_utime.tv_usec);
 	err |= __put_user(r.ru_stime.tv_sec, &ur->ru_stime.tv_sec);

arch/arm/boot/compressed/head.S

@@ -597,6 +597,8 @@ __common_mmu_cache_on:
 		sub	pc, lr, r0, lsr #32	@ properly flush pipeline
 #endif
 
+#define PROC_ENTRY_SIZE (4*5)
+
 /*
  * Here follow the relocatable cache support functions for the
  * various processors.  This is a generic hook for locating an
@@ -624,7 +626,7 @@ call_cache_fn:	adr	r12, proc_types
  ARM(		addeq	pc, r12, r3		) @ call cache function
  THUMB(		addeq	r12, r3			)
  THUMB(		moveq	pc, r12			) @ call cache function
-		add	r12, r12, #4*5
+		add	r12, r12, #PROC_ENTRY_SIZE
 		b	1b
 
 /*
@@ -691,9 +693,9 @@ proc_types:
 
 		.word	0x41069260		@ ARM926EJ-S (v5TEJ)
 		.word	0xff0ffff0
-		b	__arm926ejs_mmu_cache_on
+		W(b)	__arm926ejs_mmu_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_off
-		b	__armv5tej_mmu_cache_flush
+		W(b)	__armv5tej_mmu_cache_flush
 
 		.word	0x00007000		@ ARM7 IDs
 		.word	0x0000f000
@@ -794,6 +796,16 @@ proc_types:
 
 		.size	proc_types, . - proc_types
 
+		/*
+		 * If you get a "non-constant expression in ".if" statement"
+		 * error from the assembler on this line, check that you have
+		 * not accidentally written a "b" instruction where you should
+		 * have written W(b).
+		 */
+		.if (. - proc_types) % PROC_ENTRY_SIZE != 0
+		.error "The size of one or more proc_types entries is wrong."
+		.endif
+
 /*
  * Turn off the Cache and MMU.  ARMv3 does not support
  * reading the control register, but ARMv4 does.

arch/arm/common/dmabounce.c

@@ -255,7 +255,7 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
 		if (buf == 0) {
 			dev_err(dev, "%s: unable to map unsafe buffer %p!\n",
 			       __func__, ptr);
-			return 0;
+			return ~0;
 		}
 
 		dev_dbg(dev,

arch/arm/configs/davinci_all_defconfig

@@ -157,7 +157,7 @@ CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_XFS_FS=m

arch/arm/configs/netx_defconfig

@@ -60,7 +60,7 @@ CONFIG_FB_ARMCLCD=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_INOTIFY=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y

arch/arm/configs/viper_defconfig

@@ -142,7 +142,7 @@ CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_G_PRINTER=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=m
 CONFIG_RTC_DRV_SA1100=m
 CONFIG_EXT2_FS=m

arch/arm/configs/xcep_defconfig

@@ -73,7 +73,7 @@ CONFIG_SENSORS_MAX6650=m
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_SA1100=m
 CONFIG_DMADEVICES=y
 # CONFIG_DNOTIFY is not set

arch/arm/configs/zeus_defconfig

@@ -158,7 +158,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
 CONFIG_LEDS_TRIGGER_GPIO=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_ISL1208=m
 CONFIG_RTC_DRV_PXA=m
 CONFIG_EXT2_FS=y

arch/arm/include/asm/assembler.h

@@ -13,6 +13,9 @@
  *  Do not include any C declarations in this file - it is included by
  *  assembler source.
  */
+#ifndef __ASM_ASSEMBLER_H__
+#define __ASM_ASSEMBLER_H__
+
 #ifndef __ASSEMBLY__
 #error "Only include this from assembly code"
 #endif
@@ -290,3 +293,4 @@
 	.macro	ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
 	usracc	ldr, \reg, \ptr, \inc, \cond, \rept, \abort
 	.endm
+#endif /* __ASM_ASSEMBLER_H__ */

arch/arm/include/asm/entry-macro-multi.S

@@ -1,3 +1,5 @@
+#include <asm/assembler.h>
+
 /*
  * Interrupt handling.  Preserves r7, r8, r9
  */

arch/arm/kernel/devtree.c

@@ -76,6 +76,9 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 	unsigned long dt_root;
 	const char *model;
 
+	if (!dt_phys)
+		return NULL;
+
 	devtree = phys_to_virt(dt_phys);
 
 	/* check device tree validity */

arch/arm/kernel/entry-armv.S

@@ -435,6 +435,10 @@ __irq_usr:
 	usr_entry
 	kuser_cmpxchg_check
 
+#ifdef CONFIG_IRQSOFF_TRACER
+	bl	trace_hardirqs_off
+#endif
+
 	get_thread_info tsk
 #ifdef CONFIG_PREEMPT
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -453,7 +457,7 @@ __irq_usr:
 #endif
 
 	mov	why, #0
-	b	ret_to_user
+	b	ret_to_user_from_irq
  UNWIND(.fnend		)
 ENDPROC(__irq_usr)
 

arch/arm/kernel/entry-common.S

@@ -64,6 +64,7 @@ work_resched:
 ENTRY(ret_to_user)
 ret_slow_syscall:
 	disable_irq				@ disable interrupts
+ENTRY(ret_to_user_from_irq)
 	ldr	r1, [tsk, #TI_FLAGS]
 	tst	r1, #_TIF_WORK_MASK
 	bne	work_pending
@@ -75,6 +76,7 @@ no_work_pending:
 	arch_ret_to_user r1, lr
 
 	restore_user_regs fast = 0, offset = 0
+ENDPROC(ret_to_user_from_irq)
 ENDPROC(ret_to_user)
 
 /*

arch/arm/kernel/module.c

@@ -193,8 +193,17 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 				offset -= 0x02000000;
 			offset += sym->st_value - loc;
 
-			/* only Thumb addresses allowed (no interworking) */
+			/*
-			if (!(offset & 1) ||
+			 * For function symbols, only Thumb addresses are
+			 * allowed (no interworking).
+			 *
+			 * For non-function symbols, the destination
+			 * has no specific ARM/Thumb disposition, so
+			 * the branch is resolved under the assumption
+			 * that interworking is not required.
+			 */
+			if ((ELF32_ST_TYPE(sym->st_info) == STT_FUNC &&
+				!(offset & 1)) ||
 			    offset <= (s32)0xff000000 ||
 			    offset >= (s32)0x01000000) {
 				pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",

arch/arm/kernel/perf_event.c

@@ -583,7 +583,7 @@ static int armpmu_event_init(struct perf_event *event)
 static void armpmu_enable(struct pmu *pmu)
 {
 	/* Enable all of the perf events on hardware. */
-	int idx;
+	int idx, enabled = 0;
 	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
 
 	if (!armpmu)
@@ -596,9 +596,11 @@ static void armpmu_enable(struct pmu *pmu)
 			continue;
 
 		armpmu->enable(&event->hw, idx);
+		enabled = 1;
 	}
 
-	armpmu->start();
+	if (enabled)
+		armpmu->start();
 }
 
 static void armpmu_disable(struct pmu *pmu)

arch/arm/kernel/setup.c

@@ -73,6 +73,7 @@ __setup("fpe=", fpe_setup);
 #endif
 
 extern void paging_init(struct machine_desc *desc);
+extern void sanity_check_meminfo(void);
 extern void reboot_setup(char *str);
 
 unsigned int processor_id;
@@ -900,6 +901,7 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
+	sanity_check_meminfo();
 	arm_memblock_init(&meminfo, mdesc);
 
 	paging_init(mdesc);

arch/arm/kernel/smp.c

@@ -318,9 +318,13 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	smp_store_cpu_info(cpu);
 
 	/*
-	 * OK, now it's safe to let the boot CPU continue
+	 * OK, now it's safe to let the boot CPU continue.  Wait for
+	 * the CPU migration code to notice that the CPU is online
+	 * before we continue.
 	 */
 	set_cpu_online(cpu, true);
+	while (!cpu_active(cpu))
+		cpu_relax();
 
 	/*
 	 * OK, it's off to the idle thread for us

arch/arm/kernel/smp_twd.c

@@ -115,7 +115,7 @@ static void __cpuinit twd_calibrate_rate(void)
 		twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
 
 		printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
-			(twd_timer_rate / 1000000) % 100);
+			(twd_timer_rate / 10000) % 100);
 	}
 }
 

arch/arm/kernel/traps.c

@@ -139,7 +139,7 @@ static void dump_instr(const char *lvl, struct pt_regs *regs)
 	fs = get_fs();
 	set_fs(KERNEL_DS);
 
-	for (i = -4; i < 1; i++) {
+	for (i = -4; i < 1 + !!thumb; i++) {
 		unsigned int val, bad;
 
 		if (thumb)
@@ -563,7 +563,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 		if (!pmd_present(*pmd))
 			goto bad_access;
 		pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
-		if (!pte_present(*pte) || !pte_dirty(*pte)) {
+		if (!pte_present(*pte) || !pte_write(*pte) || !pte_dirty(*pte)) {
 			pte_unmap_unlock(pte, ptl);
 			goto bad_access;
 		}

arch/arm/mach-at91/at91cap9.c

@@ -223,15 +223,15 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {

arch/arm/mach-at91/at91cap9_devices.c

@@ -1220,7 +1220,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91cap9_set_console_clock(portnr);
+		at91cap9_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91rm9200.c

@@ -199,9 +199,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
 };
 
 static struct clk_lookup usart_clocks_lookups[] = {

arch/arm/mach-at91/at91rm9200_devices.c

@@ -1135,7 +1135,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91rm9200_set_console_clock(portnr);
+		at91rm9200_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91sam9260_devices.c

@@ -1173,7 +1173,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9260_set_console_clock(portnr);
+		at91sam9260_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91sam9261_devices.c

@@ -1013,7 +1013,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9261_set_console_clock(portnr);
+		at91sam9261_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91sam9263_devices.c

@@ -1395,7 +1395,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9263_set_console_clock(portnr);
+		at91sam9263_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91sam9g45.c

@@ -217,11 +217,11 @@ static struct clk *periph_clocks[] __initdata = {
 static struct clk_lookup periph_clocks_lookups[] = {
 	/* One additional fake clock for ohci */
 	CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -1550,7 +1550,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9g45_set_console_clock(portnr);
+		at91sam9g45_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/at91sam9rl.c

@@ -191,8 +191,8 @@ static struct clk *periph_clocks[] __initdata = {
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -1168,7 +1168,7 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
-		at91sam9rl_set_console_clock(portnr);
+		at91sam9rl_set_console_clock(at91_uarts[portnr]->id);
 	}
 }
 

arch/arm/mach-at91/board-cap9adk.c

@@ -215,7 +215,7 @@ static void __init cap9adk_add_device_nand(void)
 	csa = at91_sys_read(AT91_MATRIX_EBICSA);
 	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
 
-	cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit();
+	cap9adk_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (cap9adk_nand_data.bus_width_16)
 		cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/board-sam9260ek.c

@@ -214,7 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/board-sam9261ek.c

@@ -220,7 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/board-sam9263ek.c

@@ -221,7 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/board-sam9g20ek.c

@@ -198,7 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/board-sam9m10g45ek.c

@@ -178,7 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
-	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
+	ek_nand_data.bus_width_16 = board_have_nand_16bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;

arch/arm/mach-at91/include/mach/system_rev.h

@@ -13,13 +13,13 @@
  * the 16-31 bit are reserved for at91 generic information
  *
  * bit 31:
- *	0 => nand 16 bit
+ *	0 => nand 8 bit
- *	1 => nand 8 bit
+ *	1 => nand 16 bit
  */
-#define BOARD_HAVE_NAND_8BIT	(1 << 31)
+#define BOARD_HAVE_NAND_16BIT	(1 << 31)
-static int inline board_have_nand_8bit(void)
+static inline int board_have_nand_16bit(void)
 {
-	return system_rev & BOARD_HAVE_NAND_8BIT;
+	return system_rev & BOARD_HAVE_NAND_16BIT;
 }
 
 #endif /* __ARCH_SYSTEM_REV_H__ */

arch/arm/mach-davinci/devices-da8xx.c

@@ -494,7 +494,7 @@ static struct platform_device da850_mcasp_device = {
 	.resource	= da850_mcasp_resources,
 };
 
-struct platform_device davinci_pcm_device = {
+static struct platform_device davinci_pcm_device = {
 	.name	= "davinci-pcm-audio",
 	.id	= -1,
 };

arch/arm/mach-davinci/devices.c

@@ -298,7 +298,7 @@ static void davinci_init_wdt(void)
 
 /*-------------------------------------------------------------------------*/
 
-struct platform_device davinci_pcm_device = {
+static struct platform_device davinci_pcm_device = {
 	.name		= "davinci-pcm-audio",
 	.id		= -1,
 };

arch/arm/mach-davinci/gpio.c

@@ -252,9 +252,11 @@ static struct irq_chip gpio_irqchip = {
 static void
 gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
-	struct davinci_gpio_regs __iomem *g = irq2regs(irq);
+	struct davinci_gpio_regs __iomem *g;
 	u32 mask = 0xffff;
 
+	g = (__force struct davinci_gpio_regs __iomem *) irq_desc_get_handler_data(desc);
+
 	/* we only care about one bank */
 	if (irq & 1)
 		mask <<= 16;
@@ -422,8 +424,7 @@ static int __init davinci_gpio_irq_setup(void)
 
 		/* set up all irqs in this bank */
 		irq_set_chained_handler(bank_irq, gpio_irq_handler);
-		irq_set_chip_data(bank_irq, (__force void *)g);
+		irq_set_handler_data(bank_irq, (__force void *)g);
-		irq_set_handler_data(bank_irq, (void *)irq);
 
 		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
 			irq_set_chip(irq, &gpio_irqchip);

arch/arm/mach-ep93xx/core.c

@@ -251,9 +251,9 @@ static void ep93xx_uart_set_mctrl(struct amba_device *dev,
 	unsigned int mcr;
 
 	mcr = 0;
-	if (!(mctrl & TIOCM_RTS))
+	if (mctrl & TIOCM_RTS)
 		mcr |= 2;
-	if (!(mctrl & TIOCM_DTR))
+	if (mctrl & TIOCM_DTR)
 		mcr |= 1;
 
 	__raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
@@ -402,11 +402,15 @@ static struct resource ep93xx_eth_resource[] = {
 	}
 };
 
+static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
+
 static struct platform_device ep93xx_eth_device = {
 	.name		= "ep93xx-eth",
 	.id		= -1,
 	.dev		= {
-		.platform_data	= &ep93xx_eth_data,
+		.platform_data		= &ep93xx_eth_data,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.dma_mask		= &ep93xx_eth_dma_mask,
 	},
 	.num_resources	= ARRAY_SIZE(ep93xx_eth_resource),
 	.resource	= ep93xx_eth_resource,

arch/arm/mach-exynos4/Kconfig

@@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC
 	help
 	  Common setup code for the camera interfaces.
 
+config EXYNOS4_SETUP_USB_PHY
+	bool
+	help
+	  Common setup code for USB PHY controller
+
 # machine support
 
 menu "EXYNOS4 Machines"
@@ -176,6 +181,7 @@ config MACH_NURI
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
 	select SAMSUNG_DEV_PWM
 	help
 	  Machine support for Samsung Mobile NURI Board.

arch/arm/mach-exynos4/Makefile

@@ -56,4 +56,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI)	+= setup-sdhci.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 
-obj-$(CONFIG_USB_SUPPORT)		+= usb-phy.o
+obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY)	+= setup-usb-phy.o

arch/arm/mach-exynos4/cpu.c

@@ -23,6 +23,7 @@
 #include <plat/sdhci.h>
 #include <plat/devs.h>
 #include <plat/fimc-core.h>
+#include <plat/iic-core.h>
 
 #include <mach/regs-irq.h>
 
@@ -98,7 +99,7 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_USB_HSPHY,
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_HSPHY),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
@@ -132,6 +133,11 @@ void __init exynos4_map_io(void)
 	s3c_fimc_setname(1, "exynos4-fimc");
 	s3c_fimc_setname(2, "exynos4-fimc");
 	s3c_fimc_setname(3, "exynos4-fimc");
+
+	/* The I2C bus controllers are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+	s3c_i2c2_setname("s3c2440-i2c");
 }
 
 void __init exynos4_init_clocks(int xtal)

arch/arm/mach-exynos4/dev-audio.c

@@ -330,7 +330,7 @@ struct platform_device exynos4_device_ac97 = {
 
 static int exynos4_spdif_cfg_gpio(struct platform_device *pdev)
 {
-	s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(3));
+	s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(4));
 
 	return 0;
 }

arch/arm/mach-exynos4/headsmp.S

@@ -13,7 +13,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__INIT
+	__CPUINIT
 
 /*
  * exynos4 specific entry point for secondary CPUs.  This provides

arch/arm/mach-exynos4/include/mach/regs-usb-phy.h

@@ -11,7 +11,7 @@
 #ifndef __PLAT_S5P_REGS_USB_PHY_H
 #define __PLAT_S5P_REGS_USB_PHY_H
 
-#define EXYNOS4_HSOTG_PHYREG(x)		((x) + S5P_VA_USB_HSPHY)
+#define EXYNOS4_HSOTG_PHYREG(x)		((x) + S3C_VA_USB_HSPHY)
 
 #define EXYNOS4_PHYPWR			EXYNOS4_HSOTG_PHYREG(0x00)
 #define PHY1_HSIC_NORMAL_MASK		(0xf << 9)

arch/arm/mach-exynos4/init.c

@@ -35,6 +35,7 @@ void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 			tcfg->clocks = exynos4_serial_clocks;
 			tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
 		}
+		tcfg->flags |= NO_NEED_CHECK_CLKSRC;
 	}
 
 	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);

arch/arm/mach-exynos4/mach-smdkv310.c

@@ -78,9 +78,7 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
 };
 
 static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.ext_cd_gpio		= EXYNOS4_GPK0(2),
-	.ext_cd_gpio_invert	= 1,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 #ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
 	.max_width		= 8,
@@ -96,9 +94,7 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
 };
 
 static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 #ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
 	.max_width		= 8,

arch/arm/mach-exynos4/time.c

@@ -206,6 +206,7 @@ static cycle_t exynos4_pwm4_read(struct clocksource *cs)
 	return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40));
 }
 
+#ifdef CONFIG_PM
 static void exynos4_pwm4_resume(struct clocksource *cs)
 {
 	unsigned long pclk;
@@ -218,6 +219,7 @@ static void exynos4_pwm4_resume(struct clocksource *cs)
 	exynos4_pwm_init(4, ~0);
 	exynos4_pwm_start(4, 1);
 }
+#endif
 
 struct clocksource pwm_clocksource = {
 	.name		= "pwm_timer4",

arch/arm/mach-footbridge/dc21285-timer.c

@@ -103,6 +103,7 @@ static void __init footbridge_timer_init(void)
 	clockevents_calc_mult_shift(ce, mem_fclk_21285, 5);
 	ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce);
 	ce->min_delta_ns = clockevent_delta2ns(0x000004, ce);
+	ce->cpumask = cpumask_of(smp_processor_id());
 
 	clockevents_register_device(ce);
 }

arch/arm/mach-footbridge/include/mach/debug-macro.S

@@ -26,6 +26,7 @@
 #include <asm/hardware/debug-8250.S>
 
 #else
+#include <mach/hardware.h>
 	/* For EBSA285 debugging */
 		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
 		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
@@ -36,8 +37,8 @@
 		.else
 		mov	\rp, #0
 		.endif
-		orr	\rv, \rp, #0x42000000
+		orr	\rv, \rp, #dc21285_high
-		orr	\rp, \rp, #dc21285_high
+		orr	\rp, \rp, #0x42000000
 		.endm
 
 		.macro	senduart,rd,rx

arch/arm/mach-h720x/Kconfig

@@ -6,12 +6,14 @@ config ARCH_H7201
 	bool "gms30c7201"
 	depends on ARCH_H720X
 	select CPU_H7201
+	select ZONE_DMA
 	help
 	  Say Y here if you are using the Hynix GMS30C7201 Reference Board
 
 config ARCH_H7202
 	bool "hms30c7202"
 	select CPU_H7202
+	select ZONE_DMA
 	depends on ARCH_H720X
 	help
 	  Say Y here if you are using the Hynix HMS30C7202 Reference Board

arch/arm/mach-msm/timer.c

@@ -23,6 +23,8 @@
 #include <linux/io.h>
 
 #include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
+
 #include <mach/msm_iomap.h>
 #include <mach/cpu.h>
 
@@ -55,10 +57,12 @@ enum timer_location {
 #if defined(CONFIG_ARCH_QSD8X50)
 #define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */
 #define MSM_DGT_SHIFT (0)
-#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60) || \
+#elif defined(CONFIG_ARCH_MSM7X30)
-				      defined(CONFIG_ARCH_MSM8960)
 #define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */
 #define MSM_DGT_SHIFT (0)
+#elif defined(CONFIG_ARCH_MSM8X60) || defined(CONFIG_ARCH_MSM8960)
+#define DGT_HZ (27000000 / 4) /* 27 MHz (PXO) / 4 by default */
+#define MSM_DGT_SHIFT (0)
 #else
 #define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */
 #define MSM_DGT_SHIFT (5)
@@ -100,7 +104,11 @@ static cycle_t msm_read_timer_count(struct clocksource *cs)
 {
 	struct msm_clock *clk = container_of(cs, struct msm_clock, clocksource);
 
-	return readl(clk->global_counter);
+	/*
+	 * Shift timer count down by a constant due to unreliable lower bits
+	 * on some targets.
+	 */
+	return readl(clk->global_counter) >> clk->shift;
 }
 
 static struct msm_clock *clockevent_to_clock(struct clock_event_device *evt)

arch/arm/mach-mxs/ocotp.c

@@ -16,6 +16,8 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 
+#include <asm/processor.h>	/* for cpu_relax() */
+
 #include <mach/mxs.h>
 
 #define OCOTP_WORD_OFFSET		0x20

arch/arm/mach-omap1/Makefile

@@ -4,14 +4,14 @@
 
 # Common support
 obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
-obj-y += clock.o clock_data.o opp_data.o reset.o
+obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
 obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 
 # Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o
+obj-$(CONFIG_PM) += pm.o sleep.o
 
 # DSP
 obj-$(CONFIG_OMAP_MBOX_FWK)	+= mailbox_mach.o

arch/arm/mach-omap1/board-ams-delta.c

@@ -215,7 +215,7 @@ static struct omap_kp_platform_data ams_delta_kp_data __initdata = {
 	.delay		= 9,
 };
 
-static struct platform_device ams_delta_kp_device __initdata = {
+static struct platform_device ams_delta_kp_device = {
 	.name		= "omap-keypad",
 	.id		= -1,
 	.dev		= {
@@ -225,12 +225,12 @@ static struct platform_device ams_delta_kp_device __initdata = {
 	.resource	= ams_delta_kp_resources,
 };
 
-static struct platform_device ams_delta_lcd_device __initdata = {
+static struct platform_device ams_delta_lcd_device = {
 	.name	= "lcd_ams_delta",
 	.id	= -1,
 };
 
-static struct platform_device ams_delta_led_device __initdata = {
+static struct platform_device ams_delta_led_device = {
 	.name	= "ams-delta-led",
 	.id	= -1
 };
@@ -267,7 +267,7 @@ static struct soc_camera_link ams_delta_iclink = {
 	.power		= ams_delta_camera_power,
 };
 
-static struct platform_device ams_delta_camera_device __initdata = {
+static struct platform_device ams_delta_camera_device = {
 	.name   = "soc-camera-pdrv",
 	.id     = 0,
 	.dev    = {

arch/arm/mach-omap1/gpio15xx.c

@@ -41,7 +41,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
 	.bank_stride		= 1,
 };
 
-static struct __initdata platform_device omap15xx_mpu_gpio = {
+static struct platform_device omap15xx_mpu_gpio = {
 	.name           = "omap_gpio",
 	.id             = 0,
 	.dev            = {
@@ -70,7 +70,7 @@ static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap15xx_gpio = {
+static struct platform_device omap15xx_gpio = {
 	.name           = "omap_gpio",
 	.id             = 1,
 	.dev            = {

arch/arm/mach-omap1/gpio16xx.c

@@ -44,7 +44,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
 	.bank_stride		= 1,
 };
 
-static struct __initdata platform_device omap16xx_mpu_gpio = {
+static struct platform_device omap16xx_mpu_gpio = {
 	.name           = "omap_gpio",
 	.id             = 0,
 	.dev            = {
@@ -73,7 +73,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio1 = {
+static struct platform_device omap16xx_gpio1 = {
 	.name           = "omap_gpio",
 	.id             = 1,
 	.dev            = {
@@ -102,7 +102,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio2 = {
+static struct platform_device omap16xx_gpio2 = {
 	.name           = "omap_gpio",
 	.id             = 2,
 	.dev            = {
@@ -131,7 +131,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio3 = {
+static struct platform_device omap16xx_gpio3 = {
 	.name           = "omap_gpio",
 	.id             = 3,
 	.dev            = {
@@ -160,7 +160,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
 	.bank_width		= 16,
 };
 
-static struct __initdata platform_device omap16xx_gpio4 = {
+static struct platform_device omap16xx_gpio4 = {
 	.name           = "omap_gpio",
 	.id             = 4,
 	.dev            = {

arch/arm/mach-omap1/gpio7xx.c

@@ -46,7 +46,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
 	.bank_stride		= 2,
 };
 
-static struct __initdata platform_device omap7xx_mpu_gpio = {
+static struct platform_device omap7xx_mpu_gpio = {
 	.name           = "omap_gpio",
 	.id             = 0,
 	.dev            = {
@@ -75,7 +75,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio1 = {
+static struct platform_device omap7xx_gpio1 = {
 	.name           = "omap_gpio",
 	.id             = 1,
 	.dev            = {
@@ -104,7 +104,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio2 = {
+static struct platform_device omap7xx_gpio2 = {
 	.name           = "omap_gpio",
 	.id             = 2,
 	.dev            = {
@@ -133,7 +133,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio3 = {
+static struct platform_device omap7xx_gpio3 = {
 	.name           = "omap_gpio",
 	.id             = 3,
 	.dev            = {
@@ -162,7 +162,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio4 = {
+static struct platform_device omap7xx_gpio4 = {
 	.name           = "omap_gpio",
 	.id             = 4,
 	.dev            = {
@@ -191,7 +191,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio5 = {
+static struct platform_device omap7xx_gpio5 = {
 	.name           = "omap_gpio",
 	.id             = 5,
 	.dev            = {
@@ -220,7 +220,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
 	.bank_width		= 32,
 };
 
-static struct __initdata platform_device omap7xx_gpio6 = {
+static struct platform_device omap7xx_gpio6 = {
 	.name           = "omap_gpio",
 	.id             = 6,
 	.dev            = {

arch/arm/mach-omap1/pm_bus.c

@@ -56,9 +56,13 @@ static struct dev_power_domain default_power_domain = {
 		USE_PLATFORM_PM_SLEEP_OPS
 	},
 };
+#define OMAP1_PWR_DOMAIN (&default_power_domain)
+#else
+#define OMAP1_PWR_DOMAIN NULL
+#endif /* CONFIG_PM_RUNTIME */
 
 static struct pm_clk_notifier_block platform_bus_notifier = {
-	.pwr_domain = &default_power_domain,
+	.pwr_domain = OMAP1_PWR_DOMAIN,
 	.con_ids = { "ick", "fck", NULL, },
 };
 
@@ -72,4 +76,4 @@ static int __init omap1_pm_runtime_init(void)
 	return 0;
 }
 core_initcall(omap1_pm_runtime_init);
-#endif /* CONFIG_PM_RUNTIME */
+

arch/arm/mach-omap2/board-omap3pandora.c

@@ -84,7 +84,8 @@ static struct mtd_partition omap3pandora_nand_partitions[] = {
 
 static struct omap_nand_platform_data pandora_nand_data = {
 	.cs		= 0,
-	.devsize	= 1,	/* '0' for 8-bit, '1' for 16-bit device */
+	.devsize	= NAND_BUSWIDTH_16,
+	.xfer_type	= NAND_OMAP_PREFETCH_DMA,
 	.parts		= omap3pandora_nand_partitions,
 	.nr_parts	= ARRAY_SIZE(omap3pandora_nand_partitions),
 };

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -558,7 +558,7 @@ static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module =
 	.subdev_board_info = &rx51_si4713_board_info,
 };
 
-static struct platform_device rx51_si4713_dev __initdata_or_module = {
+static struct platform_device rx51_si4713_dev = {
 	.name	= "radio-si4713",
 	.id	= -1,
 	.dev	= {

arch/arm/mach-omap2/pm-debug.c

@@ -189,7 +189,7 @@ static struct dentry *pm_dbg_dir;
 
 static int pm_dbg_init_done;
 
-static int __init pm_dbg_init(void);
+static int pm_dbg_init(void);
 
 enum {
 	DEBUG_FILE_COUNTERS = 0,
@@ -595,7 +595,7 @@ static int option_set(void *data, u64 val)
 
 DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n");
 
-static int __init pm_dbg_init(void)
+static int pm_dbg_init(void)
 {
 	int i;
 	struct dentry *d;

arch/arm/mach-pxa/spitz_pm.c

@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>

arch/arm/mach-s3c2410/Makefile

@@ -10,7 +10,6 @@ obj-n				:=
 obj-				:=
 
 obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
-obj-$(CONFIG_CPU_S3C2410)	+= irq.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o

arch/arm/mach-s3c2410/irq.c

@@ -1,34 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/irq.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-struct syscore_ops s3c24xx_irq_syscore_ops = {
-	.suspend	= s3c24xx_irq_suspend,
-	.resume		= s3c24xx_irq_resume,
-};

arch/arm/mach-s3c2440/mach-mini2440.c

@@ -552,7 +552,7 @@ struct mini2440_features_t {
 	struct platform_device *optional[8];
 };
 
-static void mini2440_parse_features(
+static void __init mini2440_parse_features(
 		struct mini2440_features_t * features,
 		const char * features_str )
 {

arch/arm/mach-s3c64xx/dev-spi.c

@@ -88,6 +88,7 @@ static struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
 	.cfg_gpio = s3c64xx_spi_cfg_gpio,
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
+	.tx_st_done = 21,
 };
 
 static u64 spi_dmamask = DMA_BIT_MASK(32);
@@ -132,6 +133,7 @@ static struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
 	.cfg_gpio = s3c64xx_spi_cfg_gpio,
 	.fifo_lvl_mask = 0x7f,
 	.rx_lvl_offset = 13,
+	.tx_st_done = 21,
 };
 
 struct platform_device s3c64xx_device_spi1 = {