mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity

net: phy: at803x: mask 1000 Base-X link mode 

AR8031/AR8033 have different status registers for copper
and fiber operation. However, the extended status register
is the same for both operation modes.

As a result of that, ESTATUS_1000_XFULL is set to 1 even when
operating in copper TP mode.

Remove this mode from the supported link modes, as this driver
currently only supports copper operation.

Signed-off-by: David Bauer <mail@david-bauer.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David Bauer 2021-06-27 12:16:07 +02:00 committed by David S. Miller
parent f9beb95e6a
commit b856150c80
1 changed files with 29 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
drivers/net/phy/at803x.c
View File

@ -610,6 +610,34 @@ static void at803x_remove(struct phy_device *phydev)
regulator_disable(priv->vddio);
}
static int at803x_get_features(struct phy_device *phydev)
{
int err;
err = genphy_read_abilities(phydev);
if (err)
return err;
if (!at803x_match_phy_id(phydev, ATH8031_PHY_ID))
return 0;
/* AR8031/AR8033 have different status registers
* for copper and fiber operation. However, the
* extended status register is the same for both
* operation modes.
*
* As a result of that, ESTATUS_1000_XFULL is set
* to 1 even when operating in copper TP mode.
*
* Remove this mode from the supported link modes,
* as this driver currently only supports copper
* operation.
*/
linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
phydev->supported);
return 0;
}
static int at803x_smarteee_config(struct phy_device *phydev)
{
struct at803x_priv *priv = phydev->priv;
@ -1225,7 +1253,7 @@ static struct phy_driver at803x_driver[] = {
.resume = at803x_resume,
.read_page = at803x_read_page,
.write_page = at803x_write_page,
/* PHY_GBIT_FEATURES */
.get_features = at803x_get_features,
.read_status = at803x_read_status,
.config_intr = &at803x_config_intr,
.handle_interrupt = at803x_handle_interrupt,