From b8a16e1fdfe9caed734df0e157ad74ae2b13e3bd Mon Sep 17 00:00:00 2001 From: Brian Swetland Date: Tue, 9 Sep 2008 09:36:50 -0700 Subject: [PATCH] [ARM] msm: add proc_comm support, necessary for clock and power control The proc_comm protocol is the lowest level protocol available for communicating with the modem core. It provides access to clock and power control, among other things, and is safe for use from atomic contexts, unlike the higher level SMD and RPC transports. Signed-off-by: Brian Swetland --- arch/arm/mach-msm/Makefile | 1 + arch/arm/mach-msm/proc_comm.c | 110 +++++++++++++++++++++++ arch/arm/mach-msm/proc_comm.h | 165 ++++++++++++++++++++++++++++++++++ 3 files changed, 276 insertions(+) create mode 100644 arch/arm/mach-msm/proc_comm.c create mode 100644 arch/arm/mach-msm/proc_comm.h diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index d12f23655850..ae96ffff494d 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,4 +1,5 @@ obj-y += io.o idle.o irq.o timer.o dma.o +obj-y += proc_comm.o # Common code for board init obj-y += common.o diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c new file mode 100644 index 000000000000..915ee704ed3c --- /dev/null +++ b/arch/arm/mach-msm/proc_comm.c @@ -0,0 +1,110 @@ +/* arch/arm/mach-msm/proc_comm.c + * + * Copyright (C) 2007-2008 Google, Inc. + * Author: Brian Swetland + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include + +#include "proc_comm.h" + +#define MSM_A2M_INT(n) (MSM_CSR_BASE + 0x400 + (n) * 4) + +static inline void notify_other_proc_comm(void) +{ + writel(1, MSM_A2M_INT(6)); +} + +#define APP_COMMAND 0x00 +#define APP_STATUS 0x04 +#define APP_DATA1 0x08 +#define APP_DATA2 0x0C + +#define MDM_COMMAND 0x10 +#define MDM_STATUS 0x14 +#define MDM_DATA1 0x18 +#define MDM_DATA2 0x1C + +static DEFINE_SPINLOCK(proc_comm_lock); + +/* The higher level SMD support will install this to + * provide a way to check for and handle modem restart. + */ +int (*msm_check_for_modem_crash)(void); + +/* Poll for a state change, checking for possible + * modem crashes along the way (so we don't wait + * forever while the ARM9 is blowing up). + * + * Return an error in the event of a modem crash and + * restart so the msm_proc_comm() routine can restart + * the operation from the beginning. + */ +static int proc_comm_wait_for(void __iomem *addr, unsigned value) +{ + for (;;) { + if (readl(addr) == value) + return 0; + + if (msm_check_for_modem_crash) + if (msm_check_for_modem_crash()) + return -EAGAIN; + } +} + +int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2) +{ + void __iomem *base = MSM_SHARED_RAM_BASE; + unsigned long flags; + int ret; + + spin_lock_irqsave(&proc_comm_lock, flags); + + for (;;) { + if (proc_comm_wait_for(base + MDM_STATUS, PCOM_READY)) + continue; + + writel(cmd, base + APP_COMMAND); + writel(data1 ? *data1 : 0, base + APP_DATA1); + writel(data2 ? *data2 : 0, base + APP_DATA2); + + notify_other_proc_comm(); + + if (proc_comm_wait_for(base + APP_COMMAND, PCOM_CMD_DONE)) + continue; + + if (readl(base + APP_STATUS) != PCOM_CMD_FAIL) { + if (data1) + *data1 = readl(base + APP_DATA1); + if (data2) + *data2 = readl(base + APP_DATA2); + ret = 0; + } else { + ret = -EIO; + } + break; + } + + writel(PCOM_CMD_IDLE, base + APP_COMMAND); + + spin_unlock_irqrestore(&proc_comm_lock, flags); + + return ret; +} + + diff --git a/arch/arm/mach-msm/proc_comm.h b/arch/arm/mach-msm/proc_comm.h new file mode 100644 index 000000000000..834760f25692 --- /dev/null +++ b/arch/arm/mach-msm/proc_comm.h @@ -0,0 +1,165 @@ +/* arch/arm/mach-msm/proc_comm.h + * + * Copyright (c) 2007 QUALCOMM Incorporated + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _ARCH_ARM_MACH_MSM_PROC_COMM_H_ +#define _ARCH_ARM_MACH_MSM_PROC_COMM_H_ + +enum { + PCOM_CMD_IDLE = 0x0, + PCOM_CMD_DONE, + PCOM_RESET_APPS, + PCOM_RESET_CHIP, + PCOM_CONFIG_NAND_MPU, + PCOM_CONFIG_USB_CLKS, + PCOM_GET_POWER_ON_STATUS, + PCOM_GET_WAKE_UP_STATUS, + PCOM_GET_BATT_LEVEL, + PCOM_CHG_IS_CHARGING, + PCOM_POWER_DOWN, + PCOM_USB_PIN_CONFIG, + PCOM_USB_PIN_SEL, + PCOM_SET_RTC_ALARM, + PCOM_NV_READ, + PCOM_NV_WRITE, + PCOM_GET_UUID_HIGH, + PCOM_GET_UUID_LOW, + PCOM_GET_HW_ENTROPY, + PCOM_RPC_GPIO_TLMM_CONFIG_REMOTE, + PCOM_CLKCTL_RPC_ENABLE, + PCOM_CLKCTL_RPC_DISABLE, + PCOM_CLKCTL_RPC_RESET, + PCOM_CLKCTL_RPC_SET_FLAGS, + PCOM_CLKCTL_RPC_SET_RATE, + PCOM_CLKCTL_RPC_MIN_RATE, + PCOM_CLKCTL_RPC_MAX_RATE, + PCOM_CLKCTL_RPC_RATE, + PCOM_CLKCTL_RPC_PLL_REQUEST, + PCOM_CLKCTL_RPC_ENABLED, + PCOM_VREG_SWITCH, + PCOM_VREG_SET_LEVEL, + PCOM_GPIO_TLMM_CONFIG_GROUP, + PCOM_GPIO_TLMM_UNCONFIG_GROUP, + PCOM_NV_WRITE_BYTES_4_7, + PCOM_CONFIG_DISP, + PCOM_GET_FTM_BOOT_COUNT, + PCOM_RPC_GPIO_TLMM_CONFIG_EX, + PCOM_PM_MPP_CONFIG, + PCOM_GPIO_IN, + PCOM_GPIO_OUT, + PCOM_RESET_MODEM, + PCOM_RESET_CHIP_IMM, + PCOM_PM_VID_EN, + PCOM_VREG_PULLDOWN, + PCOM_NUM_CMDS, +}; + +enum { + PCOM_INVALID_STATUS = 0x0, + PCOM_READY, + PCOM_CMD_RUNNING, + PCOM_CMD_SUCCESS, + PCOM_CMD_FAIL, +}; + +/* List of VREGs that support the Pull Down Resistor setting. */ +enum { + PM_VREG_PDOWN_MSMA_ID, + PM_VREG_PDOWN_MSMP_ID, + PM_VREG_PDOWN_MSME1_ID, /* Not supported in Panoramix */ + PM_VREG_PDOWN_MSMC1_ID, /* Not supported in PM6620 */ + PM_VREG_PDOWN_MSMC2_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_GP3_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_MSME2_ID, /* Supported in PM7500 and Panoramix only */ + PM_VREG_PDOWN_GP4_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_GP1_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_TCXO_ID, + PM_VREG_PDOWN_PA_ID, + PM_VREG_PDOWN_RFTX_ID, + PM_VREG_PDOWN_RFRX1_ID, + PM_VREG_PDOWN_RFRX2_ID, + PM_VREG_PDOWN_SYNT_ID, + PM_VREG_PDOWN_WLAN_ID, + PM_VREG_PDOWN_USB_ID, + PM_VREG_PDOWN_MMC_ID, + PM_VREG_PDOWN_RUIM_ID, + PM_VREG_PDOWN_MSMC0_ID, /* Supported in PM6610 only */ + PM_VREG_PDOWN_GP2_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_GP5_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_GP6_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_RF_ID, + PM_VREG_PDOWN_RF_VCO_ID, + PM_VREG_PDOWN_MPLL_ID, + PM_VREG_PDOWN_S2_ID, + PM_VREG_PDOWN_S3_ID, + PM_VREG_PDOWN_RFUBM_ID, + + /* new for HAN */ + PM_VREG_PDOWN_RF1_ID, + PM_VREG_PDOWN_RF2_ID, + PM_VREG_PDOWN_RFA_ID, + PM_VREG_PDOWN_CDC2_ID, + PM_VREG_PDOWN_RFTX2_ID, + PM_VREG_PDOWN_USIM_ID, + PM_VREG_PDOWN_USB2P6_ID, + PM_VREG_PDOWN_USB3P3_ID, + PM_VREG_PDOWN_INVALID_ID, + + /* backward compatible enums only */ + PM_VREG_PDOWN_CAM_ID = PM_VREG_PDOWN_GP1_ID, + PM_VREG_PDOWN_MDDI_ID = PM_VREG_PDOWN_GP2_ID, + PM_VREG_PDOWN_RUIM2_ID = PM_VREG_PDOWN_GP3_ID, + PM_VREG_PDOWN_AUX_ID = PM_VREG_PDOWN_GP4_ID, + PM_VREG_PDOWN_AUX2_ID = PM_VREG_PDOWN_GP5_ID, + PM_VREG_PDOWN_BT_ID = PM_VREG_PDOWN_GP6_ID, + + PM_VREG_PDOWN_MSME_ID = PM_VREG_PDOWN_MSME1_ID, + PM_VREG_PDOWN_MSMC_ID = PM_VREG_PDOWN_MSMC1_ID, + PM_VREG_PDOWN_RFA1_ID = PM_VREG_PDOWN_RFRX2_ID, + PM_VREG_PDOWN_RFA2_ID = PM_VREG_PDOWN_RFTX2_ID, + PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID +}; + +/* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */ + +#define GPIO_ENABLE 0 +#define GPIO_DISABLE 1 + +#define GPIO_INPUT 0 +#define GPIO_OUTPUT 1 + +#define GPIO_NO_PULL 0 +#define GPIO_PULL_DOWN 1 +#define GPIO_KEEPER 2 +#define GPIO_PULL_UP 3 + +#define GPIO_2MA 0 +#define GPIO_4MA 1 +#define GPIO_6MA 2 +#define GPIO_8MA 3 +#define GPIO_10MA 4 +#define GPIO_12MA 5 +#define GPIO_14MA 6 +#define GPIO_16MA 7 + +#define PCOM_GPIO_CFG(gpio, func, dir, pull, drvstr) \ + ((((gpio) & 0x3FF) << 4) | \ + ((func) & 0xf) | \ + (((dir) & 0x1) << 14) | \ + (((pull) & 0x3) << 15) | \ + (((drvstr) & 0xF) << 17)) + +int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2); + +#endif